وظائف موظف حجز تذاكر طيران

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> Keeps airplane in safe working condition by servicing engines, engine components, and airframe components. Performs routine troubleshooting, installation, repair, and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Responsible for all maintenance performed on the assigned aircraft.</p> <h4>Job description:</h4> <ul> <li>This includes but is not limited to major maintenance such as landing gear replacement, flight control replacement, and accomplishing periodical inspections.</li> <li>Maintains tactical aircraft, support equipment, and forms and records. Performs and supervises flight chief, expediter, crew chief, repair and reclamation, quality assurance, and maintenance support functions.</li> <li>Services aircraft. Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels.</li> <li>Provides for the launch, recovery, and preflight, thru-flight, and BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment.</li> <li>Uses technical data to diagnose and solve maintenance problems on aircraft systems.</li> <li>Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.</li> <li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li> <li>Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems.</li> <li>Supervises and performs aircraft jacking, lifting, and towing operations.</li> <li>Inspects aircraft structures, systems, components, and related systems.</li> <li>Supervises and performs aircraft and component inspections.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Inspects and checks components for clearances, tolerances, proper installation, and operation.</li> <li>Inspects and operates powered and nonpowered aerospace ground equipment.</li> <li>Inspects and identifies aircraft corrosion for prevention and repair.</li> <li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Inventories and maintains aircraft equipment.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum of 3-5 years' experience on like aircraft.</li> <li>High school graduate or GED with a certificate of completion.</li> <li>Experience in all aspects of intermediate level maintenance on F-16 Block 50 aircraft.</li> <li>Experience in phase inspections and all aspects of scheduled maintenance.</li> <li>Experience in inspection and troubleshooting of any systems failures.</li> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Experience with landing gear overhaul, inspection, and operational checks.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>The Maintenance Control Centre Engineer (MCC) is responsible for overseeing, coordinating, and supporting the technical operations of Salam Air’s fleet in real-time. This role involves continuous monitoring of aircraft health, managing defects, and ensuring technical dispatch reliability to minimize flight operation disruptions while upholding safety and regulatory compliance.</span><br></p><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Check aircraft history to prepare and control maintenance programs on daily basis ensuring timely completion of all maintenance activities.</span><br></span></li><li><span><span>Plan, schedule, and coordinate aircraft maintenance activities, including both scheduled and unscheduled tasks, ensuring minimal disruption to operations.</span><br></span></li><li><span><span>Monitor ongoing maintenance tasks and provide support to resolve any issues that may arise, ensuring compliance with the company's maintenance procedures and regulatory requirements.</span><br></span></li><li><span><span>Collaborate with Line Maintenance, Technical Services, OCC and other departments to ensure timely resolution of maintenance issues and maintain operational readiness.</span><br></span></li><li><span><span>Communicate effectively with flight crews, maintenance teams, and other stakeholders to provide updates on aircraft status and any maintenance-related concerns.</span><br></span></li><li><span><span>Maintain and update maintenance records and reports to ensure compliance with safety and regulatory standards.</span><br></span></li><li><span><span>Analyse maintenance trends and recommend improvements to optimize aircraft reliability and reduce downtime.</span><br></span></li><li><span><span>Assist in the development and implementation of maintenance schedules and tasks for all aircraft.</span><br></span></li><li><span><span>Provide technical support during AOG situations, ensuring swift recovery and minimal disruption to operations.</span><br></span></li><li><span><span>Monitor deferred defects for all aircraft daily and follow up on spare parts to ensure corrective actions are initiated and properly planned.</span><br></span></li><li><span><span>Coordinate with the Technical Planning and Production Planning sections on the scheduled/unscheduled component requirements and work with the relevant departments to ensure timely procurement.</span><br></span></li><li><span><span>Follow-up with the Technical Materials section to check the turn-around time for components and initiate the necessary provisioning of items.</span><br></span></li><li><span><span>Coordinate with the IOCC to obtain authorization for aircraft swapping, ensuring that no aircraft operations are delayed.</span><br></span></li><li><span><span>Follow up and monitor unscheduled work arising from accidents, incidents, failures, malfunctioning or findings discovered upon inspection of aircraft or components used.</span><br></span></li><li><span><span>Assess the nature and volume of work in detail to establish production forecasts, ensuring the optimal arrangement of workload and the timely release of serviceable aircraft according to the schedule.</span><br></span></li><li><span><span>Prepare the agenda for the weekly operational review meeting and follow up on the necessary requirements.</span><br></span></li><li><span><span>Coordinate with QA to secure a one-off authorization OOA for outstation technical handling provider that does not hold Salam Air authorization approval.</span><br></span></li><li><span><span>Undertake any other task related to aircraft maintenance as and when directed.</span><br></span></li></ul><br><span>Requirements</span><ul><li><span><span>A minimum of 7 years of experience in the aviation industry as certifying staff, with at least 3 years spent performing Maintenance Control Centre duties and functions, is preferred.</span><br></span></li><li><span><span>Level III type course for the A320 Family with CFM LEAP-1A &amp; CFM56</span><br></span></li><li><span><span>Graduate degree in Mechanical/Aeronautical/Electrical Engineering, or equivalent will be an added advantage.</span><br></span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>To lead and deliver complex, high-value aircraft and engineering-related projects across the airline’s fleet lifecycle, ensuring safe, compliant, and cost-effective execution of heavy maintenance events, aircraft transitions, Entry Into Service programs, End-of-Lease returns, ACMI inductions, and fleet modification initiatives. The role exists to ensure aircraft are delivered, maintained, modified, and transitioned in line with regulatory requirements, contractual obligations, and operational readiness standards, while minimizing downtime and optimizing fleet availability.</span><br></p><br><span>​</span><br><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Lead and manage aircraft engineering and fleet-related projects from initiation through completion.</span><br></span></li><li><span><span>Coordinate and oversee the BFE selection and procurement process by working closely with user departments and the Technical Materials Department, ensuring that all equipment meets operational and technical requirements, and that procurement and delivery activities are completed in accordance with project schedules and program objectives.</span><br></span></li><li><span><span>Manage all routine and non-routine checks including regular WP, engine change, fuel nozzle change, modification tasks.</span><br></span></li><li><span><span>Interface directly with relevant departments to effectively manage contractual obligations, including negotiating amendments arising from design modifications or schedule changes, resolving any contractual disputes, and ensuring the successful and formal closure of contracts upon project completion.</span><br></span></li><li><span><span>Review, coordinate, and support the preparation of proposals, statements of work, technical specifications, cost estimates, and contract negotiation activities to assist the Director of Engineering in evaluating options, selecting the most suitable solutions, and determining appropriate actions.</span><br></span></li><li><span><span>Act as the key liaison between internal stakeholders and external parties regarding aircraft specifications, build configuration, and production processes to ensure effective communication, coordination, and timely resolution of project-related matters.</span><br></span></li><li><span><span>Oversee contracted heavy maintenance activities, including C-Checks, structural inspections, cabin refurbishment programs, aircraft painting, and other major maintenance events.</span><br></span></li><li><span><span>Coordinate with contracted MRO organizations to ensure successful planning, execution, and redelivery of aircraft undergoing heavy maintenance.</span><br></span></li><li><span><span>Manage aircraft hangar induction and redelivery processes while ensuring adherence to schedules, budgets, quality requirements, and regulatory standards.</span><br></span></li><li><span><span>Monitor project milestones, maintenance findings, and work scope changes, implementing corrective actions when required.</span><br></span></li><li><span><span>Manage Entry Into-Service (EIS) programs for newly acquired aircraft by overseeing acceptance activities, technical records review, modifications, certifications, crew readiness, spare provisioning, and operational integration.</span><br></span></li><li><span><span>Ensure that all required paperwork and documentation are properly generated, controlled, and cleared in accordance with approved procedures before releasing the aircraft for service.</span><br></span></li><li><span><span>Ensure the accuracy and integrity of technical records, publications, and documentation for the entire fleet. Oversee the maintenance of manuals, bulletins, and logbooks to comply with regulatory and internal requirements.</span><br></span></li><li><span><span>Lead End-of-Lease aircraft return projects, ensuring compliance with lease return conditions and contractual obligations.</span><br></span></li><li><span><span>Coordinate aircraft inspections, records reviews, maintenance actions, and redelivery activities with lessors and technical representatives.</span><br></span></li><li><span><span>Manage induction of short-term wet lease (ACMI) aircraft, including technical acceptance, regulatory approvals, operational integration, and project coordination across all departments.</span><br></span></li><li><span><span>Support aircraft acquisitions, lease transitions, and fleet phase-in/phase-out activities.</span><br></span></li><li><span><span>Plan and manage implementation of aircraft modifications, upgrades, and fleet enhancement initiatives.</span><br></span></li><li><span><span>Coordinate with OEMs, design organizations, engineering teams, suppliers, and regulatory authorities for modification approvals and implementation.</span><br></span></li><li><span><span>Develop comprehensive project plans that clearly define project scope, objectives, timelines, milestones, budgets, resource requirements, and execution strategies, while ensuring effective allocation and utilization of resources throughout the project lifecycle.</span><br></span></li><li><span><span>Proactively identify, assess, and monitor project risks and potential challenges that may impact project performance, and develop appropriate mitigation and contingency strategies to minimize operational disruptions, schedule delays, and financial exposure.</span><br></span></li><li><span><span>Ensure that all project deliverables are completed in accordance with the defined technical specifications, applicable regulatory standards, safety requirements, quality expectations, and commercial obligations, while maintaining compliance with organizational policies and industry best practices.</span><br></span></li><li><span><span>Coordinate and facilitate project meetings, technical reviews, progress discussions, and stakeholder engagement activities to ensure effective communication, timely decision-making, alignment of project objectives, and successful resolution of issues throughout the project execution phase.</span><br></span></li><li><span><span>Represent Salam Air as a technical representative in meetings with aircraft manufacturers, vendors, and industry operators, ensuring effective review of project progress, timely resolution of technical issues, and alignment with agreed project timelines and objectives.</span><br></span></li><li><span><span>Perform any additional tasks as assigned by superiors.</span><br></span></li></ul><br><span>Requirements</span><ul><li><span><span>Graduate in Mechanical/Aeronautical/Electrical Engineering, or alternatively Aircraft Maintenance Engineer license ICAO type II.</span><br></span></li><li><span><span>A minimum of 15 years of experience in the aviation industry, including at least 5 years in leading technical projects.</span><br></span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>Technical Services Engineer - Records &amp; E-Services is responsible for ensuring the accuracy, integrity, and regulatory compliance of aircraft technical records and technical publications, supporting continuing airworthiness by maintaining complete maintenance records, controlling engineering documentation, managing publication revisions, and ensuring availability of up-to-date approved information to engineering and maintenance personnel in line with regulatory and company requirements.</span><br></p><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Maintain complete, accurate, and up-to-date aircraft technical records throughout the aircraft lifecycle, ensuring all maintenance activities, aircraft logbooks, component histories, inspection reports, ADs, SBs, maintenance releases, modifications, and supporting documentation are accurately recorded, validated, retained, and archived in accordance with company procedures and regulatory requirements.</span><br></span></li><li><span><span>Support aircraft deliveries, lease transitions, redeliveries, audits, and regulatory inspections by preparing, maintaining, and providing complete technical records packages and ensuring the security, accessibility, and integrity of all technical records.</span><br></span></li><li><span><span>Coordinate with Maintenance Planning, Line Maintenance, MRO, Quality, and CAMO to resolve technical records discrepancies. Also, act as a liaison between these departments to ensure timely flow of information and resources.</span><br></span></li><li><span><span>Serve as the system owner and master user for the OASES software, responsible for system administration, configuration, customization, user access management, and maintaining system data to support engineering and maintenance operations.</span><br></span></li><li><span><span>Coordinate with IT and system vendors, as required, to ensure OASES system remains current, secure, and aligned with operational and regulatory requirements.</span><br></span></li><li><span><span>Administer the Engineering &amp; Maintenance SharePoint portal by maintaining controlled engineering documents, manuals, procedures, forms, notices, and records, ensuring timely publication of revisions, removal or archiving of obsolete documents, and appropriate access for authorized personnel.</span><br></span></li><li><span><span>Ensure that all maintenance and modification activities are documented accurately and comply with regulatory and company requirements.</span><br></span></li><li><span><span>Manage the receipt, distribution, revision, and control of technical publications issued by aircraft, engine, and component manufacturers, ensuring engineering personnel have access to the latest approved documentation.</span><br></span></li><li><span><span>Maintain accurate records of aircraft configuration, including aircraft effectivity, modification status, aircraft variants, operational limitations, optional equipment, and continued airworthiness approvals.</span><br></span></li><li><span><span>Maintain and update the onboard Aircraft Document Log, ensuring all required certificates, approvals, and controlled documents are current, valid, and correctly reflected in the document index. Verify that the onboard documentation remains complete, accurate, and compliant with regulatory and operational requirements.</span><br></span></li><li><span><span>Develop, review, issue, and maintain Technical Notices and Maintenance Circulars, ensuring accurate, timely, and effective communication of engineering and maintenance information to all relevant personnel.</span><br></span></li><li><span><span>Identify opportunities to improve technical records, document control processes, workflows, and standard operating procedures, contributing to initiatives that enhance operational efficiency, data integrity, service quality, and regulatory compliance.</span><br></span></li><li><span><span>Participate in training and professional development programs to maintain up-to-date knowledge of technical records management, technical publications, applicable aviation regulations, industry standards, and relevant engineering tools and systems.</span><br></span></li><li><span><span>Carry out any other task as and when directed by Manager Technical Services.</span></span><br></li></ul><br><span>Requirements</span><ul><li><span>Graduate in Mechanical/Aeronautical/Electrical Engineering, or equivalent.<br></span></li><li><span>Minimum of 3-5 years of experience in aircraft maintenance operations.<br></span></li><li><span>Strong experience with aircraft inspection, repair, and modification.<br></span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>To ensure the continued airworthiness, reliability, safety, and operational performance of aircraft avionics and electrical systems by providing technical engineering support, evaluating regulatory requirements and technical modifications, managing reliability and maintenance programs, and coordinating with manufacturers, service providers, and internal stakeholders. The role is responsible for maintaining compliance with applicable regulatory and organizational requirements while driving continuous improvements in avionics system performance, maintenance effectiveness, and operational reliability.</span><br></p><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span>Efficiently co-ordinate with other departments regarding Technical Projects to achieve high-quality technical standards acceptable to airworthiness authority and the company.<br></span></li><li><span>Reviews ADs, SBs, modifications, reliability issues, and maintenance programs related to avionics / electrical systems.<br></span></li><li><span>Maintaining a database of information / history relevant to each aircraft and its electronics and electrical systems that includes modification data.<br></span></li><li><span>Establish and or enforce compliance of applicable rules, policies and procedures and ensure HSE Policies are complied with and recommended updates accordingly.<br></span></li><li><span>Reviews and coordinate proposal preparations, statements of work and specifications, estimation of product/service costs, negotiation and administration of contracts thereby supporting Manager Technical Services to arrive at the best option and undertake necessary action steps.<br></span></li><li><span>Oversee and manage the maintenance, inspection, and modification of aircraft electronics and electrical systems, including communications, navigation, surveillance, flight management, cockpit displays, electrical power generation/distribution, and aircraft software.<br></span></li><li><span>Develop and implement maintenance programs, ensuring compliance with safety regulations, manufacturer recommendations, and airworthiness requirements.<br></span></li><li><span>Provides engineering support for system malfunctions, component reliability, and overhaul programs.<br></span></li><li><span>Lead investigations into any issues with aircraft avionics systems, ensuring accurate root cause analysis and timely resolution.<br></span></li><li><span>Coordinate with engineering teams and external vendors to source parts, tools, and equipment necessary for repairs or modifications.<br></span></li><li><span>Ensure that all maintenance and modification activities are documented accurately and comply with regulatory and company requirements.<br></span></li><li><span>Maintain and update technical records, including inspection reports, service bulletins, and maintenance logs.<br></span></li><li><span>Contribute to the development of aircraft maintenance programs related to aircraft electronics and electrical systems, ensuring they are aligned with fleet requirements and operational goals.<br></span></li><li><span>Monitor and ensure that scheduled maintenance related to avionics is completed on time, minimizing aircraft downtime and maximizing fleet availability.<br></span></li><li><span>Liaise with other departments, including Maintenance, Operations, and Procurement, to ensure smooth execution of maintenance activities.<br></span></li><li><span>Communicate with external suppliers and manufacturers to ensure timely supply of parts and services for related aircraft electronics and electrical systems.<br></span></li><li><span>Provide technical advice and support to the team, ensuring they are equipped with the knowledge and resources to perform their duties effectively.<br></span></li><li><span>Prepare technical reports, engineering instructions, assessments, and recommendations.<br></span></li><li><span>Identify areas for improvement in maintenance procedures and contribute to the implementation of solutions that enhance service quality and efficiency.<br></span></li><li><span>Participate in training programs to stay updated on the latest technical developments, tools, and regulations in the field of aircraft avionics.<br></span></li><li><span>Carry out any other task as and when directed by Manager Technical Services.<br></span></li></ul><br><span>Requirements</span><ul><li><span><span>Graduate in Mechanical/Aeronautical/Electrical Engineering, or equivalent.</span><br></span></li><li><span><span>Minimum of 3-5 years of experience in aircraft maintenance.</span><br></span></li><li><span><span>Strong experience with aircraft inspection, repair, and modification.</span><br></span></li></ul><br> </div>

<p>Carry out aircraft maintenance, servicing, inspection, and related activities in accordance with approved maintenance data, company procedures, and instructions from the Licensed Aircraft Engineer. Assist Licensed Aircraft Engineers with aircraft arrival and departure inspections, transit checks, walk-around inspections, defect troubleshooting, rectification, and other approved maintenance activities. Operate and utilize specialized aircraft maintenance equipment, test equipment, ground support equipment, and tooling effectively and safely, as required for inspection, testing, servicing, component replacement, and maintenance activities. Ensure all tools, equipment, and ground support equipment are operated correctly and safely, and maintained in good working and serviceable condition. Maintain proper control and accountability of all tools and equipment used during maintenance activities, ensuring they are serviceable, properly calibrated where applicable, and within the required inspection and certification validity. Immediately report any safety hazard, maintenance error, incident, accident, aircraft damage, or other reportable occurrence to the responsible Licensed Aircraft Engineer or supervisor, and complete the required occurrence or incident reports. Ensure adequate pre-work preparation is completed, including the availability of required tools, equipment, materials, and maintenance documentation, to support safe and efficient work execution. Comply with all applicable Airport Authority rules, company procedures, policies, regulations, and operational requirements. Record all maintenance delays, incidents, accidents, and other relevant occurrences on the prescribed forms and submit them to the Engineer u2013 Aircraft Line Maintenance for appropriate action. Attend and successfully complete all required recurrent, continuation, competency, safety, and technical training in accordance with company requirements and applicable regulatory standards. Assist in maintaining the cleanliness, security, safety, and serviceability of aircraft maintenance areas, workshops, equipment, tools, and maintenance vehicles. Ensure full compliance with Airport Authority requirements, company procedures and regulations, and Health, Safety and Environment (HSE) policies to maintain a safe working environment throughout the assigned shift. Perform any other maintenance-related duties and responsibilities assigned by the immediate supervisor or management, within the scope of the position, applicable procedures, and regulatory requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Aeronautical Engineering or completion of basic training Part-147. 2 years apprenticeship in airline engineering base or line maintenance area.</p>

<p>Role Objective: Organize, Plan and Coordinate resources in aircraft maintenance to ensure proper and timely servicing and repairing at short turnaround. Perform inspection and certify maintenance work carried-out by himself and by non-certifying staff allocated under his control on Companyu2019s or customersu2019 aircraft and airborne equipment to the standards required by the Airworthiness Authority and the Company.</p><p>Duties and Responsibilities:</p><p>Organize plan and co-ordinate resources in the aircraft maintenance to ensure proper and timely repair</p><p>Perform inspection and certify maintenance work carried out by him and by non-certifying staff allocated under him on Companyu2019s or customeru2019s aircraft and airborne equipment to the standards required by the Airworthiness Authority and the Company. Supervision of staff under his control to ensure that the Companyu2019s Rules and Regulations and standards are adhered to and maintained. Ensure that all tooling and equipment provided is serviceable and calibrated and are operated to the Companyu2019s standards and report any unserviceability, to ensure corrective action is taken. Ensure that all incident and accident occurrences are recorded and reported to the Manager Quality Assurance and Manager Aircraft Line Maintenance. Approve requisitions for spare parts and materials required for servicing and maintenance of company fleet. Inspection of work performed for Salam Air to ensure that airworthiness authority requirement, rules, regulations, procedures and directives are complied. Liaise with Quality Assurance team on all matters related to airworthiness maintenance / service difficulties. Ensure that all work areas allocated, including aircraft Hangar are maintained in a safe and good housekeeping order. Report to the Manager Line Maintenance in respect of all Airworthiness matters connected with the u2018Terms of Approvalu2019 as described in the Company exposition. Ensure that all manuals and publications used are up to date, treated with care and returned to their storage location. Coordinate and support the Manager u2013 Line Maintenance in having an effective defect follow up with CAME, proper troubleshooting and timely rectification of ADD/MDD, Hold item are cleared in the stipulated time. Ensure that all staff working in the shift adheres to the HSE policies of the company and comply with regulatory authority requirements. Assist in ensuring proper work documents are raised, controlled and cleared up in accordance with approved procedures and methods prior to releasing aircraft for service. Supervision of all staff under him to ensure that the companyu2019s rules, regulations and standards and adhered to and maintained Carry out any other Aircraft maintenance task as and when directed by Line Maintenance Manager.</p><p><strong>Desired Candidate Profile</strong></p><h3>Requirements</h3><p>Education &amp; Experience:</p><p>3-year diploma in Aeronautical Engineering (Graduate shall be an advantage)</p><p>Ab-initio courses for Aircraft Engineer.</p><p>ICAO Type II Basic License</p><p>5 years in aircraft maintenance workshop as certified engineer</p><p>Level 2 NDT qualification in all methods.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Role Objective:</b><br></p><br><p>Organize, Plan and Coordinate resources in aircraft maintenance to ensure proper and timely servicing and repairing at short turnaround.<br></p><br><p>Perform inspection and certify maintenance work carried-out by himself and by non-certifying staff allocated under his control on Company’s or customers’ aircraft and airborne equipment to the standards required by the Airworthiness Authority and the Company.<br></p><br><p><b>Duties and Responsibilities:</b><br></p><br><p>Organize plan and co-ordinate resources in the aircraft maintenance to ensure proper and timely repair<br></p><br><p>Perform inspection and certify maintenance work carried out by him and by non-certifying staff allocated under him on Company’s or customer’s aircraft and airborne equipment to the standards required by the Airworthiness Authority and the Company.<br></p><br><p>Supervision of staff under his control to ensure that the Company’s Rules and Regulations and standards are adhered to and maintained.<br></p><br><p>Ensure that all tooling and equipment provided is serviceable and calibrated and are operated to the Company’s standards and report any unserviceability, to ensure corrective action is taken.<br></p><br><p>Ensure that all incident and accident occurrences are recorded and reported to the Manager Quality Assurance and Manager Aircraft Line Maintenance.<br></p><br><p>Approve requisitions for spare parts and materials required for servicing and maintenance of company fleet.<br></p><br><p>Inspection of work performed for Salam Air to ensure that airworthiness authority requirement, rules, regulations, procedures and directives are complied.<br></p><br><p>Liaise with Quality Assurance team on all matters related to airworthiness maintenance / service difficulties.<br></p><br><p>Ensure that all work areas allocated, including aircraft Hangar are maintained in a safe and good housekeeping order.<br></p><br><p>Report to the Manager Line Maintenance in respect of all Airworthiness matters connected with the ‘Terms&nbsp; of Approval’ as described in the Company exposition.<br></p><br><p>Ensure that all manuals and publications used are up to date, treated with care and returned to their storage location.<br></p><br><p>Coordinate and support the Manager – Line Maintenance in having an effective defect follow up with CAME, proper troubleshooting and timely rectification of ADD/MDD, Hold item are cleared in the stipulated time.<br></p><br><p>Ensure that all staff working in the shift adheres to the HSE policies of the company and comply with regulatory authority requirements.<br></p><br><p>Assist in ensuring proper work documents are raised, controlled and cleared up in accordance with approved procedures and methods prior to releasing aircraft for service.<br></p><br><p>Supervision of all staff under him to ensure that the company’s rules, regulations and standards and adhered to and maintained<br></p><br><p>Carry out any other Aircraft maintenance task as and when directed by Line Maintenance Manager.<br></p><br><br><span>Requirements</span><p><b>Education &amp; Experience:</b><br></p><br><p>3-year diploma in Aeronautical Engineering (Graduate shall be an advantage)<br></p><br><p>Ab-initio courses for Aircraft Engineer.<br></p><br><p>ICAO Type II Basic License<br></p><br><p>5 years in aircraft maintenance workshop as certified engineer<br></p><br><p>Level 2 NDT qualification in all methods.<br></p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>The Technical Services Engineer - Material Planning is responsible for providing technical and engineering support for the planning, forecasting, and management of aircraft materials, components, spare parts, and consumables required to support scheduled and unscheduled maintenance activities. The role ensures that material requirements are accurately identified based on aircraft maintenance programs, engineering requirements, fleet utilization, and reliability trends, while maintaining optimum stock levels and minimizing aircraft downtime.</span><br></p><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Plan, forecast, and ensure the timely availability of aircraft parts, materials, components, and consumables required to support scheduled and unscheduled maintenance activities and fleet operational requirements.</span><br></span></li><li><span><span>Coordinate with Maintenance Planning, Production Planning, Engineering, Procurement, Technical Materials, and Stores to identify and establish material requirements arising from maintenance programs, engineering requirements, modifications, and operational needs.</span><br></span></li><li><span><span>Monitor material availability and inventory levels for assigned material groups, ensuring optimum stock levels are maintained to support fleet requirements while minimizing excess and unnecessary inventory.</span><br></span></li><li><span><span>Review maintenance work packages, aircraft maintenance programs, engineering requirements, and upcoming maintenance inputs to forecast material requirements and ensure required parts and components are available prior to maintenance commencement.</span><br></span></li><li><span><span>Support initial provisioning and re-provisioning activities for assigned material groups, including Buyer Furnished Equipment (BFE), retrofit and modification programs, work-card materials, and breakdown spares, in accordance with fleet expansion, utilization, and phase-out plans.</span><br></span></li><li><span><span>Apply approved material planning procedures, inventory policies, forecasting methods, and stocking parameters to establish cost-effective inventory levels and ensure adequate technical support for the fleet.</span><br></span></li><li><span><span>Assist in meeting objectives of supply chain metrics including measurement and control of AOGs, Robberies, Shortages, SLAs, Surplus, Deferred Defects, Cycle Time, Backlogs and other KPIs.</span><br></span></li><li><span><span>Identify, assess, and escalate critical material shortages, supplier performance issues, extended lead times, and delivery delays, recommending appropriate corrective actions to minimize operational and maintenance impact.</span><br></span></li><li><span><span>Coordinate with Procurement, Technical Materials, Stores, Maintenance, and Engineering to resolve material shortages, inventory discrepancies, provisioning issues, unserviceable and quarantine stock, and other material-related constraints affecting aircraft maintenance.</span><br></span></li><li><span><span>Review and validate material planning parameters, including reorder points, reorder quantities, supplier lead times, average monthly usage, consumption trends, and safety stock levels, recommending adjustments based on fleet requirements and historical demand.</span><br></span></li><li><span><span>Analyse slow-moving, non-moving, surplus, and excess inventory and support inventory optimization initiatives, including stock rationalization, reallocation, vendor buy-back opportunities, and surplus disposal.</span><br></span></li><li><span><span>Review applicable technical documentation, illustrated parts catalogs, component data, vendor information, and approved technical references to support part-number relationships, alternate part evaluations, and class-change requests.</span><br></span></li><li><span><span>Prepare and coordinate documentation for alternate parts advice and class-change requests, including drafting applicable forms and compiling the required technical and supporting documentation for review and approval.</span><br></span></li><li><span><span>Analyse aircraft utilization, maintenance requirements, component reliability, historical consumption, and fleet trends to improve material demand forecasting and optimize inventory requirements.</span><br></span></li><li><span><span>Support the technical evaluation and identification of suitable aircraft materials, components, and alternate part solutions in coordination with Engineering and relevant technical departments, ensuring compliance with approved technical and regulatory requirements.</span><br></span></li><li><span><span>Participate in material planning, inventory optimization, cost-reduction, and continuous-improvement initiatives to enhance material availability, planning accuracy, inventory efficiency, and overall fleet support.</span><br></span></li><li><span><span>Provide technical material planning support during AOG and critical maintenance situations by identifying material requirements, prioritizing critical parts, and coordinating with relevant departments to facilitate timely aircraft recovery.</span><br></span></li><li><span><span>Maintain accurate material planning data, forecasts, reports, and records for assigned material groups and ensure the integrity and accuracy of relevant planning parameters and inventory information.</span><br></span></li><li><span><span>Ensure all material planning activities comply with applicable aviation regulations, approved maintenance and technical procedures, quality standards, company policies, and safety requirements.</span><br></span></li><li><span><span>Undertake any other technical services or material-planning duties related to aircraft maintenance and fleet support as directed.</span><br></span></li></ul><br><br><span>Requirements</span><ul><li><span><span>Graduate in Mechanical/Aeronautical/Electrical Engineering, or equivalent.</span><br></span></li><li><span><span>Having experience in planning.</span><br></span></li><li><span><span>Having experience in Supply Chain is preferable (Warehouse &amp; Logistics, Repair Management, Material Planning, Support &amp; Inventory Control, Technical Purchasing).</span><br></span></li><li><span><span>Having aircraft maintenance spares planning experience is preferable.</span><br></span></li><li><span><span>Having airlines or MRO work experience will also be considered.</span><br></span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Alternant-e école ingénieur au Product Support Engineering CFM56 F/H</p><br><br><p>Alternance</p><br><br><p>3 ans</p><br><br><p>Etudiant</p><br><br><p>Temps complet</p><br><br><p>Au sein de Safran Aircraft Engines, la Direction de l'Engineering du Support et des Services a pour mission d'assurer la satisfaction des clients et la profitabilité des activités par l'expertise technique. <br>Elle compte ainsi une pluralité de métiers qui gèrent la relation client, le suivi du comportement des produits en service et l'élaboration d'actions correctives permettant d'optimiser le coût d'exploitation de plus de 20.000 moteurs. <br>Elle assure le support des opérations clients en s'appuyant sur des représentants chez les compagnies aériennes et dans les ateliers de maintenance. <br>Son ambition est d'être reconnue par les clients pour son expertise technique et son support adaptés à leurs besoins opérationnels. <br>Safran Aircraft Engines conçoit, produit et commercialise à travers CFM International les moteurs civils CFM56 (A320, B737), LEAP (A320neo, B737MAX) et GE90/GP7200 (B777, A380). <br>Au sein de la direction Engineering Support &amp; Services, vous rejoignez le département Customer Product Support Engineering sur le produit CFM56. <br>Les principales missions du Product Support Engineering CFM56 sont de répondre au mieux aux compagnies aériennes et ateliers de maintenance répartis au 4 coins du monde pour tout ce qui concourt à l'utilisation et à la maintenance des moteurs vendus :<br>- Réponses techniques aux compagnies aériennes et ateliers de maintenance<br>- Suivi du comportement du moteur en service : navigabilité, fiabilité, évènements, coûts de maintenance<br>- Réalisation et exploitation du retour d'expérience opérationnel pour améliorer la fiabilité de nos moteurs<br>- Porter la voix du client en interne de l'identification du signal faible jusqu'à l'établissement des recommandations <br>- Participer à la mise à jour de la documentation technique (Engine Shop Manual/Aircraft Maintenance Manual/Component/Maintenance Manual) afin que les opérateurs disposent des documents nécessaires pour utiliser nos produits selon les dernières recommandations CFM.<br>La mission de l'alternant-e se décompose en 3 axes :<br>- Répertorier les données utilisées pour répondre aux différentes missions : type et localisation des données<br>- Proposer des méthodologies / des outils pour pérenniser ces données, les structurer et faciliter leur accès. <br>- Mettre en œuvre le plan de pérennisation <br>Vous interagissez avec les ressources du CPSE CFM56 (~30 personnes) qui comprend des spécialistes support des différents modules de responsabilité Safran Aircraft Engines.<br>Grâce à votre regard neuf et votre prise de recul, vous proposerez des solutions efficaces pour rechercher les informations. Une revue des outils existants au sein de l'après-vente sera réalisée et également des solutions disponibles sur le marché par exemple avec Intelligence Artificielle.</p><br><br><p>Personne intéressée et motivée avec un goût pour le monde aéronautique qui aura la chance de découvrir nos moteurs d'avion et la pointe en matière de technologie de Turbo réacteurs.</p><br><br><p>Vos compétences :<br>- Manipulation de données<br>- Communication, écoute<br>- Esprit de synthèse<br>- Prise de recul<br>- Force de proposition</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p>The Stores Controller is responsible for the effective control, receipt, storage, preservation, issuance, and movement of tools, equipment, aircraft materials, components, spare parts, and associated supplies within the Technical Stores. The role ensures that materials are accurately recorded, properly identified, stored, and readily available to support scheduled and unscheduled maintenance activities and operational requirements. The Stores Controller is also responsible for maintaining inventory and tool-control accuracy, ensuring compliance with approved storage and handling procedures, and supporting the timely availability of serviceable materials while maintaining full compliance with applicable aviation regulations, company procedures, quality standards, and safety requirements.<br></p><br><p>Duties and Responsibilities:<br></p><br><ul><li><span>Receive, inspect, identify, and process incoming aircraft parts, materials, components, and supplies in accordance with approved procedures and applicable documentation requirements.<br></span></li><li><span>Ensure all materials received are accurately recorded in the inventory management system, including part numbers, serial numbers, batch numbers, quantities, shelf-life information, and applicable certification or traceability documentation.<br></span></li><li><span>Ensure all materials received are accurately recorded in the inventory management system, including part numbers, serial numbers, batch/lot numbers, quantities, shelf-life information, and applicable certification or traceability documentation.<br></span></li><li><span>Ensure serviceable, unserviceable, quarantine, rejected, and other controlled materials are properly identified, segregated, and stored to prevent unauthorized use or issue.<br></span></li><li><span>Issue and deliver aircraft materials, components, tools, and consumables to Maintenance and other authorized users against approved requests, work orders, pick slip, or other authorized documentation.<br></span></li><li><span>Monitor and control the movement of materials within and between Stores locations, ensuring all transactions are accurately recorded and fully traceable.<br></span></li><li><span>Maintain and administer an effective Tool Control Program, with particular emphasis on the control and accountability of toolboxes, ensuring all tools are properly identified, recorded, issued, returned, and accounted for at all times.<br></span></li><li><span>Ensure toolbox contents are controlled against approved tool inventories or tool lists and conduct regular checks to verify that all tools are present, serviceable, and correctly accounted for before and after maintenance activities.<br></span></li><li><span>Establish and maintain effective procedures to prevent tools from being misplaced, lost, or inadvertently left behind on an aircraft following maintenance activities. Any missing tool shall be immediately identified, reported, investigated, and escalated in accordance with approved safety and maintenance procedures.<br></span></li><li><span>Coordinate with Maintenance personnel to ensure toolbox and tool accountability checks are completed before aircraft release or completion of applicable maintenance tasks, supporting the prevention of FOD and tool-related incidents.<br></span></li><li><span>Maintain accurate records of tool issuance, returns, transfers, missing tools, damaged tools, and toolbox discrepancies, ensuring full traceability and accountability.<br></span></li><li><span>Conduct periodic tool and toolbox audits, spot checks, and physical inventories to verify compliance with the Tool Control Program and identify discrepancies or opportunities for improvement.<br></span></li><li><span>Maintain accurate inventory records and conduct regular cycle counts, stock checks, and physical inventory activities. Investigate and report discrepancies and support timely corrective actions.<br></span></li><li><span>Monitor shelf-life, expiry dates, storage conditions, and preservation requirements for applicable materials and initiate appropriate action to prevent deterioration, expiry, or loss of usability.<br></span></li><li><span>Coordinate with Maintenance, Material Planning, Procurement, Quality, Engineering, and other relevant departments to resolve material availability issues, inventory discrepancies, documentation deficiencies, and other Stores-related matters.<br></span></li><li><span>Support the timely identification and escalation of critical material shortages, urgent/AOG requirements, discrepancies, and delays that may affect maintenance activities or aircraft operational readiness.<br></span></li><li><span>Ensure that aircraft parts and materials are handled, packaged, preserved, and transported in accordance with manufacturer requirements, applicable regulations, and company procedures.<br></span></li><li><span>Verify and maintain the required documentation and traceability records for aircraft materials, including authorized release certificates, certificates of conformity, delivery documentation, and other applicable records.<br></span></li><li><span>Support the identification, control, and management of excess, surplus, slow-moving, non-moving, obsolete, and scrap materials in accordance with approved company procedures.<br></span></li><li><span>Ensure proper control and timely processing of returned materials, including serviceable returns, unused materials, unserviceable components, and items removed from aircraft or maintenance activities.<br></span></li><li><span>Support the quarantine and investigation process for materials with suspected defects, discrepancies, damaged packaging, incorrect documentation, or other non-conformities, ensuring such items are appropriately controlled until disposition.<br></span></li><li><span>Maintain good housekeeping, organization, security, and safety standards within all Stores areas and ensure materials are stored in a manner that prevents damage, contamination, deterioration, or unauthorized access.<br></span></li><li><span>Operate and use Stores equipment, material handling equipment, and inventory management systems safely and in accordance with approved procedures and training requirements.<br></span></li><li><span>Assist in the preparation of Stores reports and supply chain performance data, including inventory accuracy, shortages, discrepancies, transaction backlogs, AOG requirements, shelf-life control, and other relevant KPIs.<br></span></li><li><span>Participate in internal and external audits, inspections, stock checks, and regulatory or quality assessments, providing required records and supporting the implementation of corrective actions.<br></span></li><li><span>Identify opportunities for improvement in Stores processes, inventory accuracy, material handling, storage efficiency, and service levels, and participate in continuous improvement and cost-reduction initiatives.<br></span></li><li><span>Ensure all Stores activities comply with applicable aviation regulations, company policies and procedures, quality standards, safety requirements, and approved material handling and inventory control practices.<br></span><br></li></ul><br><span>Requirements</span><ul><li><span>Diploma/High school certificate with 3+ years of experience in Materials &amp; Stores.<br></span></li><li><span>Relevant aviation, logistics, warehouse, or inventory management qualifications and professional certifications will be considered an advantage.<br></span></li><li><span>Training or certification in aircraft materials, stores management, tool control, or aviation safety is preferred.<br></span></li></ul><br> </div>

<p><strong>Role Objective</strong> The captain is responsible for the safe, efficient, and compliant operation of the aircraft. This role provides leadership to the flight crew and ensures strict adherence to operational documentation, SOPs, and regulatory standards. The captain is also accountable for contributing to the airline s On-Time Performance (OTP) targets and supporting the achievement of operational Key Performance Indicators (KPIs).</p><p><strong>Area of responsibility</strong></p><ul><li>Exercise full authority over the operation and safety of the flight.</li><li>Conduct comprehensive pre-flight planning including weather, NOTAMs, performance, fuel, and MEL/CDL assessments.</li><li>Ensure full compliance with all operational documentation, including the Operations Manual, CSM, SOPs, checklists, company policies, and regulatory requirements.</li><li>Lead, mentor, and manage the flight crew to ensure strong CRM, teamwork, and a high-performance cockpit environment.</li><li>Operate the aircraft safely and efficiently across all flight phases, including normal, abnormal, and emergency situations.</li><li>Make timely and effective decisions to maintain safe and efficient operations.</li><li>Coordinate with ATC, dispatch, ground personnel, and cabin crew to support smooth operational flow.</li><li>Provide professional communication to passengers when required.</li><li>Perform all duties in a manner that supports On-Time Performance (OTP) and contributes to achieving company KPIs related to punctuality, fuel efficiency, safety reporting, and operational discipline.</li><li>Complete all flight documentation, logs, reports, and technical paperwork accurately and in a timely manner.</li><li>Maintain personal qualifications and training currency.</li><li>Uphold the airline s values, safety culture, and professional standards always.</li><li>Perform any other related tasks as assigned by the Management.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Age</strong> Direct Entry: Minimum 25 years and less than 57 years. Company Upgrade: Minimum 25 years and minimum 5 years of service must be available prior to retirement from the date of commencement of training, except if fleet is phased out.</li><li><strong>License</strong> Direct Entry: Rated: Valid ATPL with a valid type rating. Non-Rated: Valid ATPL with valid rating on type. Foreign license must be acceptable to CAA Oman and verified by the state of issue. All documents and required rating must be valid for 6 months from the date of application. Must have completed training in Human Factors. Company Upgrade: ATPL with rating on the type.</li><li><strong>Medical</strong> Current Class 1 Medical.</li><li><strong>Experience</strong> Direct Entry: Rated Foreign ATPL: Minimum total time of 5000 hours for jet aircraft, including 1500 hours as PIC on multi-pilot certified aero planes, and 500 hours on type. Rated Oman ATPL: Minimum total time of 5000 hours for jet aircraft, including 1000 hours as PIC on multi-pilot certified aero planes, and 500 hours on type. Non-Rated Foreign ATPL: Minimum total time of 5000 hours, including 1500 hours as PIC on multi-pilot certified aero planes with an all-up weight of 20,000 kg or more. Non-Rated Oman ATPL: Minimum total time of 5000 hours, including 1000 hours as PIC on multi-pilot certified aero planes with an all-up weight of 20,000 kg or more. Company Upgrade: 4000 total flying hours, including 1500 hours flying time on multi engine aero planes with a MTOW greater than 40,000 kg.</li><li><strong>LICENSES REQUIRED</strong> Air Transport Pilot s License (ATPL). PIC (Pilot in Command) rating of the B787 /B737 aircraft as applicable.</li></ul>

<p><h4>Amentum Overview</h4> <p>Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security, and sustainability. Our people apply undaunted curiosity, relentless ambition, and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration, and well-being are integral to success. Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents.</p> <h4>Position Summary</h4> <p>This aircraft painter position will report directly to the program manager and will be responsible for all surface preparation, treatment, and painting associated with the fleet of assigned aircraft at this location.</p> <h4>Job Summary</h4> <p>Performs surface preparation, treatment, and painting of components, all aircraft surface areas, aircraft panels, support equipment, or other items as required.<br> Demonstrated ability to precisely apply paint, lacquer, epoxy, resin, or other material using brushes, rollers, spray guns, and other devices.<br> Masks and covers portions of surfaces not to be painted. Working knowledge of surface preparation and painting techniques.<br> Must be knowledgeable of military publications and diagrams.<br> Ability to precisely apply vinyl graphics to multiple aircraft surfaces.<br> Must be qualified in application of FMS-2026 Form 2, Type 1 F-16 Have Glass surface refinishing.</p> <h4>Minimum Qualifications</h4> <ul> <li>Minimum of three (3) years’ proven experience as a paint technician to include painting, maintenance, and finish work.</li> <li>Education requirement: High school diploma or GED.</li> <li>Proven experience with FMS-2026 F-16 Have Glass paint application procedures.</li> <li>Working knowledge of USAF military publications and technical orders.</li> <li>Must be able to lead, train, and mentor other technicians in all aspects of the F-16 aircraft paint technician specialty.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>F-16 Block 40 and above surface refinishing.</li> <li>Highly experienced USAF 5 and 7 skill level or civilian equivalent.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding</h4> <p><strong>Position summary:</strong><br> Aircraft Painter F-16 position will report directly to the Program Manager and will be responsible for all surface preparation, treatment, and painting associated with the fleet of assigned aircraft at this location: Thumrait, Oman.</p> <h4>Job description:</h4> <p>Performs surface preparation, treatment, and painting of components, all aircraft surface areas, aircraft panels, support equipment, or other items as required.<br> Demonstrated ability to precisely apply paint, lacquer, epoxy, resin, or other material using brushes, rollers, spray guns, and other devices.<br> Masks and covers portions of surfaces not to be painted. Working knowledge of surface preparation and painting techniques.<br> Must be knowledgeable of military publications and diagrams.<br> Ability to precisely apply vinyl graphics to multiple aircraft surfaces.<br> Application of FMS-2026 Form 2, Type 1 F-16 HAVE Glass surface refinishing.<br> Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.<br> Knowledge of military and/or company forms required by work specifications is a plus.</p> <h4>Minimum requirements:</h4> <ul> <li>Minimum of three (3) years’ proven experience as a paint technician to include painting, maintenance, and finish work.</li> <li>Proven experience with FMS-2026 F-16 HAVE Glass paint application procedures.</li> <li>Working knowledge of USAF military publications and Technical Orders.</li> <li>Education requirement: High School diploma or GED.</li> <li>Must be able to lead, train, and mentor other technicians in all aspects of the F-16 Aircraft Paint technician specialty.</li> <li>Must be qualified in application of FMS-2026 Form 2, Type 1 F-16 HAVE Glass surface refinishing.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>F-16 Block 40 and above surface refinishing.</li> <li>Experienced USAF 5 or 7 skill level or other military branch equivalent or civilian equivalent.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ALTERNANCE - Assistant-e chef de projet F/H F/H</p><br><br><p>Alternance</p><br><br><p>1 ou 2 ans</p><br><br><p>Employé administratif</p><br><br><p>Temps complet</p><br><br><p>Et si vous rejoigniez le vol à destination de Safran Aircraft Engines ? ✈<br>Safran est un groupe international de haute technologie opérant dans les domaines de l'aéronautique (propulsion, équipements et intérieurs), de l'espace et de la défense. Safran Aicraft Engines est une société du Groupe Safran. Porté par près de 15 000 collaborateurs répartis sur 31 sites dans 9 pays, Safran Aircraft Engines (SAE) est un motoriste aéronautique depuis plus de 110 ans. Nous concevons, développons, produisons et commercialisons, seul ou en coopération, des moteurs pour avions civils ou militaires, ainsi que pour les satellites.<br>Sous la supervision du chef de projet principal, l'assistant-e en gestion de projet sera<br>responsable de suivre les performances au moyen d'indicateurs clés de performance (KPI), d'analyser les problèmes, de proposer des solutions, et de développer des ressources visuelles pour améliorer la clarté des activités de notre département.</p><br><br><p>En intégrant ce poste, vous aurez l'opportunité de travailler sur des sujets concrets à fort enjeu industriel, en interaction avec différents acteurs internes et partenaires.</p><br><br><p>Étudiant-e en école d'ingénieur avec un intérêt marqué pour la gestion de projet, et une réelle volonté de comprendre et répondre aux enjeux de nos clients.<br>Vous avez la capacité de travailler de manière efficace dans un environnement dynamique et en constante évolution. Vous maîtrisez les outils informatiques et les logiciels de gestion de projet, et êtes également ouvert-e à tester de nouvelles solutions digitales, notamment l'utilisation de l'intelligence artificielle.<br>Vous êtes motivé-e, dynamique, et désireux-se d'apprendre et de contribuer activement au succès du projet.</p><br><br><br> </div>

<p>Performs surface preparation, treatment and painting of components, all aircraft surface areas, aircraft panels, support equipment, or other items as required. Demonstrated ability to precisely apply paint, lacquer, epoxy, resin, or other material using brushes, rollers, spray guns, and other devices. Masks and covers portions of surfaces not to be painted. Working knowledge of surface preparation and painting techniques. Must be knowledgeable of military publications and diagrams. Ability to precisely apply vinyl graphics to multiple aircraft surfaces. Must be qualified in application of FMS-2026 Form 2, Type 1 F-16 Have Glass surface refinishing</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum of three (3) years proven experience as a paint technician to include painting, maintenance, and finish work. Education requirement: High School diploma or GED Proven experience with FMS-2026 F-16 Have Glass paint application procedures. Working knowledge of USAF military publications and Technical Orders Must be able to lead, train and mentor other technicians in all aspects of the F-16 Aircraft Paint technician specialty</p>

<p><h4>Job Description</h4> <p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land, and sea. The incumbent must comply with all applicable international and federal transportation laws, regulations, tariffs, and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure in-transit visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS), and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares, and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li> <li>Checks for completeness and accuracy. Verifies the nomenclatures, quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), consignor and consignee codes, hazardous/classified materials, ITARS certifications, and other essential transportation data.</li> <li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment, and controls obligations for government transportation funds.</li> <li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, and maintains manifest logs.</li> <li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes, and other essential transportation data into CMOS, GATES, or IBS.</li> <li>Inspects hazardous materials to ensure proper packaging, marking, labeling, documentation, and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA), and International Maritime Dangerous Goods (IMDG)).</li> <li>Inspects, accepts, and inventories all incoming freight and containers for overages, shortages, and damage before acceptance. When required, initiates and completes DD Form 361, Transportation Discrepancy Report (TDR).</li> <li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2, or SMS.</li> <li>Prepares shipping documents and movement requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li> <li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li> <li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li> <li>Performs host country customs clearances and liaises with military and host country ministries on import and export for border customs clearances, airport customs clearances, and seaport clearances.</li> <li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.</li> <li>Loads/unloads 463L pallets, equipment, vehicles, and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li> <li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting, and maintaining operation stock levels of 463L pallets, nets, and other tie-down equipment located on-site.</li> <li>Assists the WPM Custodian with inspecting and certification, record keeping, and reporting the receipt and usage requirements.</li> <li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li> <li>Reports all lost, damaged, destroyed, and modified containers to the CCO within 12 hours of discovery.</li> <li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li> <li>Receives/ships all containers in JCM within 12 hours of receipt or departure.</li> <li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li> <li>Prepares, inspects, reviews, and submits preload plans, hazardous materials diplomatic clearances (HAZDIP), and other documents to facilitate air movement.</li> <li>Inspects cargo documentation, conducts joint inspections, and certifies that cargo is built correctly and airworthy.</li> <li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo, and baggage.</li> <li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li> <li>Loads, unloads, and services aircraft. Ensures cargo loads are secure and tied down. Assists load team chief with selecting, assembling, palletizing, and transporting cargo loads to and from aircraft and storage areas.</li> <li>Safely transports and handles explosives.</li> <li>Performs passenger service procedures, check-in, manifests passengers and baggage, and performs security checks. Loads/unloads passengers and baggage from aircraft.</li> <li>Performs weighing of cargo, vehicles, and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li> <li>Implements, documents, and controls quality, training, environment, and safety programs.</li> <li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders, and procedures.</li> <li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN in accordance with regulation.</li> <li>Maintains technical orders, publications, forms, and files required for traffic management operations.</li> <li>Compiles data and submits reports and other correspondence as required.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel, and Word programs.</li> <li>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</li> <li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li> <li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li> <li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC).</li> <li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li> <li>Will be required to receive training and operate material handling equipment.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li> <li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems, or other related experience.</li> <li>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint preferred.</li> <li>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Full time, on site at Thumrait, Dhofar Governorate, Oman</strong></p> <p><strong>Royal Air Force of Oman (RAFO)</strong></p> <p><strong>F-16 Advanced Systems Instructor (F-16 Block 50+)</strong></p> <h4>Position overview:</h4> <p>The F-16 Advanced Systems Instructor will be responsible for all theoretical classroom and on-aircraft practical instruction, when applicable. Requires extensive systems knowledge of the F-16, concentrating instructional efforts on theory of operation, wire repair, advanced troubleshooting, fault isolation, and returning of aircraft to serviceable condition. The instructor will be required to develop and create courses designed to achieve all these benchmarks targeting the most experienced RAFO technicians. Minimum requirements will be 10+ years on F-16, verifiable instructor training and course development experience. Airframe & Powerplant (A&P) certification and/or aviation related degree preferred - not required.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Knowledge of all F-16 systems, pneuhydraulic, engines, airframe, environmental, fuels, weapons and egress, with emphasis on a background of highly advanced avionics/electronics training and experience of how aircraft systems are integrated.</li> <li>Highly advanced knowledge and experience with the F-16 MIDAS Technical Order (TO) system. This includes reading schematics, wiring diagrams, fault reporting and isolation.</li> <li>Knowledge and application using avionics and related test equipment, ohm meters, wire integrity testers, memory load verifiers (MLVs), loading of operational flight programs (OFPs), harness repair and removal/installation, matrix and system troubleshooting, alignment, calibration, and boresight, etc.</li> <li>Verifiable formal instructional experience, to include certificates of completion from military courses, Basic Instructor courses (BIC), Maintenance Instructor courses (MIC), or equivalent.</li> <li>Experience in the development and creation of maintenance instruction courses including, but not limited to: writing syllabi, course overviews and objectives, student prerequisites, target audiences, number of students per course, course credit and hours, formative and summative assessments, and student evaluations.</li> <li>Will be responsible for teaching other RAFO instructional courses, as directed, to include F-16 familiarization courses for OJTs, flightline and aircraft safety courses, maintenance officer courses, TO and aircraft forms documentation courses.</li> <li>Performs all related instructor duties and liaises with Officer in Charge, Technical Training School (TTS) as directed by RAFO and/or Program Manager.</li> <li>Working knowledge of classroom technology, ability to load courses on tablets, electronic whiteboards, building and displaying PowerPoint presentations, etc. Ability to create and distribute computer-based (CBTs) or pdf-based testing.</li> <li>Ability to train, lead and mentor RAFO technicians and ability to provide understandable, relatable and comprehensive advanced F-16 electronics training.</li> </ul> <h4>Knowledge and skills:</h4> <ul> <li>AFSC 2A374, 2A3X4 F-16 Block 50 Integrated Avionics, Electrician, Tactical Aircraft Maintenance Tradesman, or equivalent, highly experienced 7 skill level with working knowledge of all F-16 aircraft systems, emphasis on avionics/electronics.</li> <li>Verified and confirmed instructional training and experience in a classroom and practical environment. Certificates of training will be required for review prior to acceptance of candidate.</li> <li>Self-motivated, highly skilled, highly advanced individual with knowledge of course development, assessment, feedback and formal evaluation of students in their charge.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum 10+ years required F-16 Block 50 experience, preferably with an avionics or electronics related background.</li> <li>Minimum 5 years required as a former maintenance instructor, A&P instructor or Field Training Detachment (FTD) instructor, or equivalent.</li> <li>Aviation-related degree from credible university preferred but might be waived in lieu of experience level.</li> <li>Airframe & Powerplant (A&P) certification preferred, or equivalent - not required. Might be waived, depending, in lieu of experience.</li> <li>Minimum required high school diploma, or equivalent.</li> </ul> <p>This will be a highly skilled, self-motivating and challenging position. We are looking for someone with advanced knowledge and experience. Must have integrity, self-discipline and the capability to provide excellent in-depth training for current and future RAFO technicians.</p> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<p>Accepting applications - Pending contract award and funding CY2026</p><p>Full Time, On Site at Thumrait, Dhofar Governate, Oman</p><p>Royal Air Force of Oman (RAFO), F-16 Advanced Systems Instructor (F-16 Block 50+)</p><p>POSITION OVERVIEW: The F-16 Advanced Systems Instructor will be responsible for all theoretical classroom and on-aircraft practical instruction, when applicable. Requires extensive systems knowledge of the F-16, concentrating instructional efforts on theory of operation, wire repair, advanced troubleshooting, fault isolation and returning of aircraft to serviceable condition. The instructor will be required to develop and create courses designed to achieve all these benchmarks targeting the most experienced RAFO technicians. Minimum requirements will be 10+ years on F-16, verifiable instructor training and course development experience. Airframe &amp; Powerplant (A&amp;P) certification and/or aviation related degree preferred- not required.</p><p>DUTIES &amp; RESPONSIBILITIES:</p><p>Knowledge of all F-16 systems, pneudraulic, engines, airframe, environmental, fuels, weapons and egress, with emphasis on a background of highly advanced Avionics/Electronics training and experience of how aircraft systems are integrated. Highly advanced knowledge and experience with the F-16 MIDAS Technical Order (TO) system. This includes reading schematics, wiring diagrams, fault reporting and isolation. Knowledge and application using Avionics and related test equipment, ohm meters, wire integrity testers, memory load verifiers (MLVs), loading of operational flight programs (OFPs), harness repair and removal/installation, matrix and system troubleshooting, alignment, calibration and boresight etc. Verifiable formal instructional experience, to include certificates of completion from military courses, Basic Instructor courses (BIC), Maintenance Instructor courses (MIC), or equivalent. Experience in the development and creation of maintenance instruction courses including, but not limited to: writing syllabi, course overviews and objectives, student prerequisites, target audiences, number of students per course, course credit and hours, formative and summative assessments and student evaluations. Will be responsible for teaching other RAFO instructional courses, as directed, to include F-16 familiarization courses for OJTs, flightline and aircraft safety courses, maintenance officer courses, TO and aircraft forms documentation courses. Performs all related instructor duties and liaise with Officer in Charge, Technical Training School (TTS) as directed by RAFO and/or Program Manager. Working knowledge of classroom technology, ability to load courses on tablets, electronic whiteboards, building and displaying power point presentations, etc. Ability to create and distribute computer-based (CBTs) or pdf-based testing. Ability to train, lead and mentor RAFO technicians and ability to provide understandable, relatable and comprehensive advanced F-16 Electronics training.</p><p>KNOWLEGE AND SKILLS:</p><p>AFSC 2A374, 2A3X4 F-16 Block 50 Integrated Avionics, Electrician, Tactical Aircraft Maintenance Tradesman, or equivalent, highly experienced 7 skill level with working knowledge of all F-16 aircraft systems, emphasis on Avionics/Electronics. Verified and confirmed instructional training and experience in a classroom and practical environment. Certificates of Training will be required for review prior to acceptance of candidate. Self-motivated, highly skilled, highly advanced individual with knowledge of course development, assessment, feedback and formal evaluation of students in their charge.</p><p>MINIMUM REQUIREMENTS:</p><p>Minimum 10+ years required F-16 Blk 50 experience, preferably with an Avionics or Electronics related background Minimum 5 years required as a former Maintenance Instructor, A&amp;P Instructor or Field Training Detachment (FTD) instructor, or equivalent Aviation-related degree from credible university preferred but might be waived in lieu of experience level. Airframe &amp; Powerplant (A&amp;P) certification preferred , or equivalent- Not Required. Might be waived, depending, in lieu of experience. Minimum required high school diploma, or equivalent This will be a highly skilled, self-motivating and challenging position. We are looking for someone with advanced knowledge and experience. Must have integrity, self-discipline and the capability to provide excellent in-depth training for current and future RAFO technicians.</p><p>Clearance Requirements: Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.</p><p>Physical Requirements/Working Environment: Frequently lifts parts and equipment up to 25 pounds. Occasionally lifts objects up to 50 pounds. Most heavy lifting is accomplished through the use of mechanical devices. Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. The employee is occasionally required to sit, climb, or balance.</p>#RAFOinstructor #avionicsinstructor<p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 10+ years required F-16 Blk 50 experience, preferably with an Avionics or Electronics related background</li><li>Minimum 5 years required as a former Maintenance Instructor, A&amp;P Instructor or Field Training Detachment (FTD) instructor, or equivalent</li><li>Aviation-related degree from credible university preferred but might be waived in lieu of experience level.</li><li>Airframe &amp; Powerplant (A&amp;P) certification preferred , or equivalent- Not Required. Might be waived, depending, in lieu of experience.</li><li>Minimum required high school diploma, or equivalent</li><li>Must have integrity, self-discipline and the capability to provide excellent in-depth training for current and future RAFO technicians.</li><li>Must be able to obtain and maintain facility credentials/authorization.</li><li>US Citizenship is required for facility credentials/authorization to work at this facility.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>STAGE - Ingénieur-e mécanicien-ne bureau d'études Support et Services CFM56 (F/H) F/H</p><br><br><p>Stage</p><br><br><p>6 mois</p><br><br><p>Etudiant</p><br><br><p>Temps complet</p><br><br><p>Modélisation statiques et dynamiques sur une aube de turbine basse pression CFM56<br>Dans le cadre de l'amélioration de la compréhension des phénomènes physiques observés sur les moteurs en service, nous recherchons un ou une stagiaire pour contribuer à la modélisation statique et dynamique d'aubes de turbine basse pression CFM56.<br>L'objectif du stage est de développer une méthodologie innovante permettant de mettre en évidence les phénomènes physiques au niveau du rotor de turbine afin de mieux comprendre les constants vus en service.<br>Dans une première phase, il s'agira de mettre en place des modèles éléments finis tenant compte des modifications géométriques visibles en service :<br>Familiarisation avec les pratiques Safran Aircraft Engines et prise en main de la méthode éléments finis.<br>Validation d'une méthodologie de modélisation.<br>Calcul d'influence dans différentes configurations.<br>Ces travaux permettront d'améliorer la compréhension physique et scientifique du comportement des pièces en service, avec pour finalité d'apporter un support technique renforcé aux clients.</p><br><br><p>Vous souhaitez intégrer un grand Groupe aéronautique leader sur ses marchés avec de grands défis à relever ?<br>Vous trouverez ces défis au sein de la Direction des Bureaux d'études Support &amp; service Engineering de Safran Aircraft Engines. Le bureau d'études intégré à cette direction est impliqué sur trois grands axes :<br>Répondre aux demandes du client sur des questions techniques sur la maintenance de leurs moteurs<br>Permettre une plus grande autonomie et opérabilité des moteurs par le client en validant techniquement des critères d'inspection et des réparations de pièces inscrites au manuel de maintenance (ESM – Engine Shop Manual)<br>Mettre en place des études approfondies pour comprendre et améliorer le comportement des moteurs en service<br>Pour pouvoir réaliser ces trois axes, le bureau d'études est en lien avec de nombreux autres services et domaines de compétence :<br>- L'aérothermique &amp; aérodynamique<br>- Le service matériaux &amp; procédés<br>- Les représentants Safran Aircraft Engines auprès des compagnies aériennes<br>- Le Product Support Engineering <br>- Les ateliers de maintenance (shop)<br>- Le service de Data science pour récupérer les nombreuses données moteurs<br>Au sein de ce bureau d'études, vous aurez également une vision globale d'une turbine Basse Pression, des turbomachines et de leur fonctionnement.<br>Vous aurez l'occasion de travailler dans un cadre dynamique et épanouissant. </p><br><br><p>Bac +5 à la recherche d'un stage de fin d'étude, diplôme ingénieur-e ou universitaire<br>Connaissances en mécanique générale, calcul des structures, calcul résistance des matériaux<br>Bonnes connaissances des outils Microsoft et en particulier Excel ou bien du langage Python<br>Bonnes connaissances des logiciels en lien avec le calcul éléments finis et leur solveur : PATRAN (Samcef) et Workbench (Ansys)<br>Bon relationnel, savoir travailler en équipe, curieux-se </p><br><br><br> </div>