وظائف مهندس مواد

<p><h4>Job description</h4> <p>The warehouse specialist assists the supply supervisor in the performance of routine warehousing duties. Assists in training of material storage and distribution/warehouse personnel. Receives, stores and issues supplies and equipment. Maintains warehouse locations, selects supplies and equipment for issues and shipments. Manages the shelf-life program. Carries out housekeeping duties in the warehouse. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Ensures all receipts of supplies and equipment from deposits and other sources of supply are identified properly and are in a serviceable condition before storing.</li> <li>Performs warehouse validations and prepares the warehouse for inventories.</li> <li>Receive, inspect and store materials in designated warehouse locations.</li> <li>Operate material handling equipment such as forklifts and pallet jacks.</li> <li>Prepare and issue materials for operational use or deployment.</li> <li>Conduct routine inventories to maintain accurate warehouse records.</li> <li>Ensure compliance with safety and security standards for storage.</li> <li>Maintain a clean and organized warehouse environment.</li> <li>Support audits and inspections by providing accurate records and inventory data.</li> <li>Performs other duties as directed or assigned by the supervisor.</li> <li>Be responsible for HAZMAT and environmental functions.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment up to 10k forklift.</li> <li>High school diploma or equivalent required.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Working knowledge in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs is preferred.</li> <li>Proficiency in warehouse operations and inventory management systems preferred.</li> <li>One to two years' experience in a supply system or closely related function is preferred.</li> <li>Maximo experience is preferred.</li> </ul></p><p></p>

<p>Provide Operational Support at OQEP, Operated Assets Operations Support, under TL Operation Support scope s by delivering of a best practice operational strategies and results; in order to ensure safe and efficient operations at the site.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><h3>Common for All Levels</h3><p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations.</p><p>Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations.</p><p>Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications.</p><p>Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements.</p><p>Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues.</p><p>Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters.</p><p>Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements.</p><p>Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage.</p><p>Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices.</p><h3>Engineer Operation Support</h3><p>Execute assigned engineering and operational support tasks under supervision.</p><p>Apply approved engineering procedures, standards, and work practices during execution and operations.</p><p>Support commissioning, start up, and operational activities as part of a multi disciplinary team.</p><p>Contribute to studies, reviews, and troubleshooting activities under guidance.</p><h3>Senior Engineer Operation Support</h3><p>Independently handle multiple operational support and execution scopes across on plot and off plot facilities.</p><p>Provide technical guidance and mentoring to junior engineers and trainees.</p><p>Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment.</p><p>Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs).</p><p>Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives.</p><p>Manage technical aspects of procurement, bid evaluation, and vendor document reviews.</p><h3>Lead Engineer Operation Support</h3><p>Act as technical authority for operational support across on plot and off plot upstream facilities.</p><p>Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams.</p><p>Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases.</p><p>Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance.</p><p>Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders.</p><p>Support capability development, succession planning, and continuous improvement within Operation Support.</p><h2>Key interactions</h2><p>Internal: Operated Assets functions.</p><p>External: Contractors, Vendors &amp; Suppliers</p><h2>Notable Working Conditions.</h2><p>Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education requirements</h2><p>Bachelors in Process, Chemical, or equivalent</p><h2>Language requirements</h2><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><h2>Background and experience</h2><h3>Competencies and skills</h3><h4>Background</h4><p>5+ years of relevant experience</p><p>Adaptable and motivated engineering professional who thrives in complex operational and project environments.</p><p>Experience in engineering design support and troubleshooting within upstream surface facilities.</p><p>Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support.</p><p>Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes.</p><p>Working knowledge of Quality Assurance, Quality Control, and HSE requirements.</p><p>Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h4>Soft Skills</h4><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity.</p><p>Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration.</p><p>Ability to manage multiple priorities in a dynamic, time critical operational environment.</p><p>Analytical and fact based approach to problem solving and decision making.</p><p>Strong troubleshooting mindset and result oriented attitude.</p><h4>Technical Skills</h4><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office).</p><p>Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines.</p><p>Knowledge of resource coordination, interface management, and basic contract administration.</p><p>Experience in Root Cause Analysis (RCA) and structured problem solving techniques.</p><p>Ability to read and interpret engineering drawings, specifications, and vendor documentation.</p><p>Basic understanding of project execution and project management principles.</p><p>Ability to support the development, review, and modification of technical and operational procedures.</p><p>Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>About </strong> <strong>Calo</strong> <strong> </strong> <p>Launched in Bahrain in November of 2019, Calo is on a mission to make healthy easy. We re a team of dedicated people driving this mission by providing better, faster, and cheaper ways to access food through technology. </p> Role overview <p>We are looking for an experienced Quality Specialist who will be responsible for checking the quality of all incoming and outgoing material and products as well as the production procedures. You will be a firm advocate of quality in our business.</p> <p>The ideal candidate will possess a trained eye for detail and will be reliable and committed. In depth knowledge and comprehension of quality standards is essential. The goal is to ensure that our products are made of flawless materials with well-functioning equipment. That way our customers will enjoy high-quality service so that we can achieve long-term success.</p> <strong>Main Responsibilities</strong> <ul> <li> <p>Inspect procedures of the entire production cycle (from purchasing to customer delivery) to ensure they are efficient and comply with Food Safety &amp; Quality standards.</p> </li> <li> <p>Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials.</p> </li> <li> <p>Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the concerned managers.</p> </li> <li> <p>Maintain records of testing, information, and various metrics such as the number of defective products per day, kitchen inspection results, Hygiene &amp; Sanitation Inspection, etc.</p> </li> <li> <p>Monitor the use of equipment to ensure it is safe and well-maintained and report any that doesn t meet the requirements.</p> </li> <li> <p>Select output samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications, etc.)</p> </li> <li> <p>Conduct staff awareness training sessions on food Safety &amp; quality</p> </li> <li> <p>Support the team to develop and implement a food safety &amp; quality management system.</p> </li> <li> <p>Address customer complaints by conducting a thorough investigation and preparing a corrective action plan for non-conformities.</p> </li> <li> <p>Prepare and submit reports to the line manager.</p> </li> </ul> <strong>Ideal Candidate</strong> <ul> <li> <p>Must have had a minimum of 3 years of previous proven experience as a quality controller, or any relevant role in the catering or hotel industry.</p> </li> <li> <p>Minimum Bachelor s Degree from a Food Background (Food Technology/Food Science/Microbiology/Bio-Chemistry, etc.) </p> </li> <li> <p>Must be HACCP certified with a Level 03 as a minimum requirement.</p> </li> <li> <p>Familiarity with quality testing machines and systems.</p> </li> <li> <p>Proficiency in MS Office.</p> </li> <li> <p>Strong verbal and written English language skills.</p> </li> <li> <p>Possesses a confident, firm, and pleasant personality that can work well with a team.</p> </li> <li> <p>Currently located in Oman</p> </li> <li> <p>Familiar with Oman's rules and regulations as per the municipality/MOH.</p> </li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Piping Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. This role is to supervise a team of piping engineers and designers to translate the limited information from the Concept Selection Report and/or Basis for Design to Basis for Design and/or Front End Design &amp; project specifications as well as detailed design.</p><br><p>Supervise a team of piping engineers to carry out the Piping Engineering FEED and DD activities (Define and Execute stage) for an assigned area of a specific project in order to generate the relevant Piping Engineering FEED and DD deliverables on time according to DCAF requirements.<br> &nbsp;</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A. Job Summary The Procurement Manager is responsible for overseeing the sourcing, purchasing, and supplier management functions of the company. This role involves developing procurement strategies, negotiating contracts, and ensuring that goods and services are purchased at the best value while maintaining high-quality standards. The Procurement Manager works closely with internal stakeholders and suppliers to align procurement practices with company goals and budgetary constraints B. Key Responsibilities Core Area: 1. Procurement Strategy &amp; Sourcing - Develop and implement procurement strategies aligned with business objectives. - Identify, evaluate, and onboard reliable suppliers for raw materials, APIs, packaging, and equipment. - Establish long-term supplier relationships to ensure quality and cost efficiency. - Stay updated with market trends, pricing, and supplier capabilities. - Conduct market analysis to identify sourcing opportunities and trends. 2. Vendor &amp; Supplier Management - Build and maintain strong relationships with key suppliers to ensure long-term partnerships. - Monitor supplier performance and resolve issues related to quality, delivery, or compliance - Conduct supplier qualifications, audits, and performance evaluations. - Identify, evaluate, and select suppliers based on quality, cost, and reliability. - Negotiate contracts, pricing, and payment terms with suppliers. - Ensure compliance with organizational policies and legal regulations in all contracts - Manage supplier risk assessment and alternate sourcing strategies. 3. Cost Optimization &amp; Budget Management - Drive cost-saving initiatives while maintaining product quality and availability. - Analyze procurement cost trends, pricing models, and total cost of ownership (TCO). - Work with finance teams to ensure budget control and cost efficiency. - Optimize inventory levels to balance cost and demand. 4. Inventory &amp; Supply Chain Coordination - Collaborate with production, planning, and warehouse teams to ensure on-time material availability. - Monitor inventory levels, stock movement, and reordering processes. - Implement Just-In-Time (JIT) and vendor-managed inventory (VMI) models for optimization. 5. Procurement Process Management - To supervise procurement of raw materials, Packaging Material, Lab chemicals, Reference standards and other MISC materials as per requirement. - To receive requisitions from various departments and process them as per priority in discussion with Director SCM and based on required approvals. - Compile the documents for pre-budget approval with Finance dept. Follow up with Finance and Internal Auditor, as it needs to be coordinated for approval with Internal Auditor once Finance approves it. - To supervise and validate the generating of Purchase Order (PO) for approved order, check and send mail with the approved Po to vendor and following up with Finance for advance payment settlements / Following up with vendors for faster delivery of Material. - Arrange Collection of the documents through mail, Invoice, packing list, certificate origin, certificate of analysis, if it is air shipment air waybill, it is sea shipment bill of lading - Raw material needs to be attested by MOH / MOE backed up by COA / MSDS and seek approval for import from them. - To make sure duty charges are paid if it is not exempted ones though Agent, if they are not mentioned in MOH decree - To follow up with the clearing agent for clearance of all the imported material. - As soon as the material arrival is known, inform the stores in advance for them to plan the space and receive the materials. - To procure miscellaneous items consumable from local vendors and arrange to keep those items in stores. - To liaison with the Accounts department for the LC terms agreed with vendors, to enable them to interact with the bank and complete formalities and make the process smoother. - Follow up with Accounts for LC copy and provide it to suppliers. - Update MOH on Raw materials procured using CSV format on a monthly basis. - To forward raw material active or Excipient and packaging material sample to QC &amp; R &amp;D department for analysis and follow-up for the report. - To ensure audits of manufacturers are planned and organized as per QA requirements for regulatory compliance. - To liaise with vendors for documentation requirements for Regulatory Dept. on regular basis for submissions with various regulatory bodies. - To ensure cost of materials are in control and credit terms with Vendors are improved in comparison to previous years. 6. Human Resource Management: - Overall supervision and motivation of the team. - Set and approve targets for the performance of his immediate subordinates. - Carry out annual performance appraisal of his subordinates and identify their potential and training and development needs. - Identifying training needs for subordinates and train and develop supervisors to provide management depth; provide motivation and career development for employees, - Give guidance, support, and professional leadership to staff under him and motivate them. C. Job Specifications Education - Bachelor s degree in Pharmacy, Supply Chain Management, Business Administration, or a related field. - Professional certifications such as CIPS (Chartered Institute of Procurement &amp; Supply) or CPSM (Certified Professional in Supply Management) are a plus. Experience - Minimum 15 years of experience, preferably in similar or related industry, out of which 3-5 years in managerial rule. - Extensive experience in managing procurement, with a proven track record of success - Experience in global sourcing or managing international suppliers - Knowledge of inventory management or logistics Functional Competencies 1. Strategic Sourcing - Expertise in identifying, evaluating, and selecting suppliers to meet business needs. - Ability to analyze market trends and supplier capabilities to optimize sourcing strategies. 2. Supplier Relationship Management - Proficiency in managing supplier contracts, performance, and relationships. - Knowledge of supplier risk assessment and supplier development programs. 3. Contract Management and Negotiation - Skilled in drafting, reviewing, and negotiating procurement contracts and agreements. - Understanding of legal and regulatory requirements in procurement contracts. 4. Cost and Price Analysis - Ability to conduct total cost of ownership (TCO) analysis and cost-benefit evaluations. - Proficiency in benchmarking supplier pricing and managing procurement budgets. 5. Procurement Systems and Tools - Proficiency in using procurement and ERP systems (e.g., SAP, Oracle, Ariba, Coupa). - Familiarity with e-procurement platforms and supplier management tools. 6.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education - Bachelor s degree in Pharmacy, Supply Chain Management, Business Administration, or a related field. - Professional certifications such as CIPS (Chartered Institute of Procurement &amp; Supply) or CPSM (Certified Professional in Supply Management) are a plus. Experience - Minimum 15 years of experience, preferably in similar or related industry, out of which 3-5 years in managerial rule. - Extensive experience in managing procurement, with a proven track record of success - Experience in global sourcing or managing international suppliers - Knowledge of inventory management or logistics Functional Competencies 1. Strategic Sourcing - Expertise in identifying, evaluating, and selecting suppliers to meet business needs. - Ability to analyze market trends and supplier capabilities to optimize sourcing strategies. 2. Supplier Relationship Management - Proficiency in managing supplier contracts, performance, and relationships. - Knowledge of supplier risk assessment and supplier development programs. 3. Contract Management and Negotiation - Skilled in drafting, reviewing, and negotiating procurement contracts and agreements. - Understanding of legal and regulatory requirements in procurement contracts. 4. Cost and Price Analysis - Ability to conduct total cost of ownership (TCO) analysis and cost-benefit evaluations. - Proficiency in benchmarking supplier pricing and managing procurement budgets. 5. Procurement Systems and Tools - Proficiency in using procurement and ERP systems (e.g., SAP, Oracle, Ariba, Coupa). - Familiarity with e-procurement platforms and supplier management tools. 6. Risk Management - Ability to identify and mitigate procurement risks, such as supply chain disruptions or compliance issues. - Knowledge of risk assessment frameworks and contingency planning. 7. Regulatory and Compliance Knowledge - Understanding of laws and regulations related to procurement, including anti-corruption and ethical sourcing practices. - Proficiency in ensuring compliance with company policies and industry standards. 8. Inventory and Supply Chain Management - Knowledge of inventory control methods and supply chain processes. - Ability to align procurement strategies with supply chain requirements to ensure seamless operations. 9. Vendor Performance Management - Expertise in setting and monitoring KPIs for supplier performance. - Ability to conduct supplier audits and manage performance improvement plans. 10. Demand Planning and Forecasting - Ability to align procurement activities with demand forecasts and production schedules. - Skills in collaborating with other departments to anticipate purchasing needs. Core Competencies - Strong negotiation skills - High level of integrity, ethics, and professionalism. - Excellent communication and interpersonal skills. - Collaboration and Influencing - Customer and Stakeholder Focus - Attention to detail and accuracy. - Innovation and Continuous Improvement - Dedication to mentoring and empowering team members to achieve their potential. - Ability to build a high-performing team and promote a culture of collaboration and excellence.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Electrical Engineer</p><p><br></p><p>We are seeking a skilled and detail-oriented Electrical Engineer with experience in building construction projects.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>3 8 years of experience in building construction projects.</p><p></p></section>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a <strong>Senior Materials &amp; Corrosion Engineer </strong>to join its Projects team focusing on delivering across FEED and Detail design scopes of work. in this role one will be responsible to :</p> <ul> <li>Carry out the Material &amp; Corrosion Engineering FEED activities (Define stage) for a Mega Project and/or several Medium Projects in order to generate relevant FEED deliverables on time, meeting QMS requirement according to DCAF requirements.</li> <li>Ensure design integrity and deliverables quality for all areas within a Mega project with special emphasis on interfaces and continuous improvements.</li> </ul> <p>Position is based in Muscat, Oman.<br> </p> <div> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com <br></div> <div> <br> </div> <div> <b>Diversity Statement </b> </div> <div> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br></div> <p> <strong>What makes you remarkable? </strong> <br> At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p> <p> <strong>Experience:</strong> </p> <ul> <li>Degree in Mechanical Engineering / Metallurgy Engineering.</li> <li>Minimum 6 years in FEED/ENGINEERING and Minimum 10 years in oil &amp; gas Experience.</li> <li>Work in a matrix organization and handle multiple reporting relationships and project responsibilities.</li> <li>Working effectively with diverse, multi-cultural teams, peers, and stakeholders.</li> <li>Fluent in English; Written and Spoken.</li> <li>TA2 Certification</li> </ul> <p> <strong>Designing the future. Transforming the world</strong> </p> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> <br> <strong>What we can offer</strong> </p> <ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors </li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li>Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li> </ul> <p> <strong>Typical responsibilities</strong> </p> <ul> <li>Ability to develop CTR based on scope of work and provide input to finalise the project execution schedule</li> <li>Manage work assignments, work load, work forecasting for assigned project</li> <li>Participate in HAZID, Design Reviews, HAZOP s, 3D Model Reviews, IPF Classifications, HSE related Workshops.</li> <li>Implement/practice/monitor Quality Management System in assigned projects in line with ISO 9001-2015 and API Q2 2nd edition requirements and DCAF requirement.</li> <li>Collaborate, build relationships, and manage interfaces with other FEED Office disciplines, assets project teams, etc. in the assigned project.</li> <li>Ensure seamless handover of FEED Deliverables to asset project and operations teams.</li> <li>Ensure meeting document control deadlines in the assigned project.</li> <li>Knowledge Transfer to Omani staffs</li> <li>Maintain good relationship with the project team, which is critical to the (design) project success.</li> <li>Promote team working environment where recognition of team performance as a whole is a greater priority than projecting individual contribution.</li> <li>Demonstrate repeatability and constant improvement in projects across a broad range of geographic, technical, and cultural differences.</li> <li>Develop/share best practices, work processes, system and tools, based on experience gained in projects.</li> <li>Able to handle efficiently multiple medium projects.</li> <li>Analyze / Support Technical deviation to Company / Shell / International standard</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The core responsibilities include the meticulous evaluation, selection, retrieval, and arrangement of documents. This involves proficient copying, scanning, and secure storage of all essential paperwork. A key duty is the creation and maintenance of accessible, retrievable computer archives and databases. The role requires organizing archival records and developing effective classification systems to ensure easy access to archival materials. Preparation of archival records, such as document descriptions, is crucial for facilitating information access. Accuracy checks and editing of files, including contracts, are a daily task. Reviewing and updating technical documents, like manuals and workflows, ensures organizational efficiency. Creating templates for future use streamlines processes. Maintaining confidentiality around sensitive information and terms of agreement is paramount. Managing the flow of documentation across various departments, including human resources, marketing, and construction, is essential. Finally, supervising the direct viewing of documents and retrieving copies of materials is part of the supervisory aspect of this role.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The core responsibilities include the meticulous evaluation, selection, retrieval, and arrangement of documents. This involves proficient copying, scanning, and secure storage of all essential paperwork. A key duty is the creation and maintenance of accessible, retrievable computer archives and databases. The role requires organizing archival records and developing effective classification systems to ensure easy access to archival materials. Preparation of archival records, such as document descriptions, is crucial for facilitating information access. Accuracy checks and editing of files, including contracts, are a daily task. Reviewing and updating technical documents, like manuals and workflows, ensures organizational efficiency. Creating templates for future use streamlines processes. Maintaining confidentiality around sensitive information and terms of agreement is paramount. Managing the flow of documentation across various departments, including human resources, marketing, and construction, is essential. Finally, supervising the direct viewing of documents and retrieving copies of materials is part of the supervisory aspect of this role.</p></div></section>

<p>Position: Resident Engineer (including Design Review)</p><p><strong>Desired Candidate Profile</strong></p><p><b>Qualification</b>: B.Sc. Degree in Civil or Mechanical Engineering (or related field); PMP Certificate preferred</p><p>Years of Experience: 20+ years total; min. 10 years with a consultancy; completed at least two (2) projects of similar size/value as Resident Engineer/Project Manager from inception to closeout</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Quality Specialist who will be responsible for checking the quality of all incoming and outgoing material and products as well as the production procedures. You will be a firm advocate of quality in our business. The ideal candidate will possess a trained eye for detail and will be reliable and committed. In depth knowledge and comprehension of quality standards is essential. The goal is to ensure that our products are made of flawless materials with well-functioning equipment. That way our customers will enjoy high-quality service so that we can achieve long-term success.</p><p>Main Responsibilities</p><ul><li>Inspect procedures of the entire production cycle (from purchasing to customer delivery) to ensure they are efficient and comply with Food Safety &amp; Quality standards.</li><li>Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials.</li><li>Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the concerned managers.</li><li>Maintain records of testing, information, and various metrics such as the number of defective products per day, kitchen inspection results, Hygiene &amp; Sanitation Inspection, etc.</li><li>Monitor the use of equipment to ensure it is safe and well-maintained and report any that doesn't meet the requirements.</li><li>Select output samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications, etc.)</li><li>Conduct staff awareness training sessions on food Safety &amp; quality</li><li>Support the team to develop and implement a food safety &amp; quality management system.</li><li>Address customer complaints by conducting a thorough investigation and preparing a corrective action plan for non-conformities.</li><li>Prepare and submit reports to the line manager.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have had a minimum of 3 years of previous proven experience as a quality controller, or any relevant role in the catering or hotel industry.</p><p>Minimum Bachelor s Degree from a Food Background (Food Technology/Food Science/Microbiology/Bio-Chemistry, etc.)</p><p>Must be HACCP certified with a Level 03 as a minimum requirement.</p><p>Familiarity with quality testing machines and systems.</p><p>Proficiency in MS Office.</p><p>Strong verbal and written English language skills.</p><p>Possesses a confident, firm, and pleasant personality that can work well with a team.</p><p>Currently located in Oman</p><p>Familiar with Oman's rules and regulations as per the municipality/MOH.</p><p></p></section>

<p>Dear Doctors, Greetings from Good Fellow Foreign Services</p><p>We have urgent openings in a leading company in Oman they are recruiting Positions- 1. Sr. Ductman 2. QAQC Inspector 3. Procurement Manager 4. Junior Engineer</p><p><strong>Desired Candidate Profile</strong></p><p>Dear Doctors, Greetings from Good Fellow Foreign Services</p><p>We have urgent openings in a leading company in Oman they are recruiting Positions- 1. Sr. Ductman 2. QAQC Inspector 3. Procurement Manager 4. Junior Engineer</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Design and develop innovative products and transform ideas into production-ready 3D models using <strong>Autodesk Fusion 360 (F360)</strong>.</p></li><li><p>Prepare, optimize, and slice 3D models for printing.</p></li><li><p>Operate, maintain, and troubleshoot FDM 3D printers, including <strong>Elegoo, AnkerMake, and Ender 3 S1 Plus</strong>.</p></li><li><p>Select suitable printing materials and optimize print settings to achieve high-quality results.</p></li><li><p>Inspect, test, and perform post-processing to ensure products meet quality standards.</p></li><li><p>Organize design files, print profiles, and product documentation.</p></li><li><p>Collaborate with the team to develop and improve products for the company's brands and retail stores.</p></li><li><p>Stay up to date with the latest 3D printing technologies, materials, and product development trends.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Diploma or Bachelor's degree is preferred. Equivalent hands-on experience with a strong portfolio will also be considered.</p></li><li><p>Minimum <strong>2 years</strong> of practical experience in <strong>3D printing, product development, or CAD design</strong>.</p></li><li><p>Proficiency in <strong>Autodesk Fusion 360 (F360)</strong>.</p></li><li><p>Strong experience with <strong>FDM 3D printing</strong> and slicing software such as <strong>Cura</strong> or equivalent.</p></li><li><p>Hands-on experience with <strong>Elegoo, AnkerMake, Ender 3 S1 Plus</strong>, or similar FDM printers.</p></li><li><p>Good knowledge of printing materials including <strong>PLA, PETG, TPU, and ABS</strong>.</p></li><li><p>Strong problem-solving skills, attention to detail, and the ability to manage multiple projects.</p></li><li><p>Creative mindset with the ability to transform concepts into functional, production-ready products.</p></li><li><p><strong>A portfolio showcasing previous 3D design and printing projects is required.</strong></p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Piping Foreman Location: Oman Industry: Construction Job Summary We are hiring experienced Piping Foremen / Chargehands for a leading project in Oman. The ideal candidate should have hands-on experience in supervising piping installation activities, managing site teams, and ensuring work is executed according to project specifications and safety standards. Key Responsibilities Supervise and coordinate daily piping installation and maintenance activities. Read and interpret piping drawings, isometric drawings, and project specifications. Allocate tasks and monitor the performance of pipe fitters, welders, and helpers. Ensure work is completed within project schedules and quality requirements. Coordinate with engineers, supervisors, and other site teams. Maintain compliance with safety regulations and company procedures. Monitor material usage and report site progress to management. Resolve on-site issues and ensure smooth workflow execution. Salary: 52000 INR Per Month Requirements Minimum 5 years of experience in piping supervision or chargehand roles. Ability to read and understand piping drawings and isometrics. Strong leadership and team management skills. Experience in industrial, construction, oil &amp; gas, or mechanical projects. Gulf experience will be an added advantage. Good communication and coordination abilities. Walk in Interview Details: Bihar - Patna West Bengal - Beharampur Odisha - Bhubaneshwar Telangana - Hyderabad</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 5 years of experience in piping supervision or chargehand roles. Ability to read and understand piping drawings and isometrics. Strong leadership and team management skills. Experience in industrial, construction, oil &amp; gas, or mechanical projects. Gulf experience will be an added advantage. Good communication and coordination abilities.</p><p></p></section>

<p><b>Opening for T(Tata)QCTPL:- Oman location</b></p><p><br></p><p>*Maintain records of calibration, inspections &amp; testing equipment.</p><p>*Ensure availability of appropriate version of applicable work equipment.</p><p>*Witness qualification procedures, tests &amp; certify the results.</p><p>*Provide feedback to Site Quality Engineer for daily quality issues.</p><p><strong>Desired Candidate Profile</strong></p><p>Maintain records of calibration, inspections &amp; testing equipment. Ensure availability of appropriate version of applicable work equipment. Witness qualification procedures, tests &amp; certify the results. Provide feedback to Site Quality Engineer for daily quality issues.</p>

<p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office. Position is based in Musandam, Oman for a long-term assignment. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li><li>Certified Lead Auditor to any of the Management Systems ISO 9001 / ISO 14001 / OHSAS 18001.</li><li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li><li>Minimum Experience: Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry.</li><li>Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry.</li><li>Inspection and testing experience at manufacturing units and Construction sites required.</li><li>Multidiscipline Quality Control experience is preferred.</li><li>Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.</li><li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment.</li><li>Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li><li>Good Knowledge in the application of industry codes and standards</li></ul>

<p><h4>Job description</h4> <p>The warehouse specialist assists the supply supervisor in the performance of routine warehousing duties. Assists in training of material storage and distribution/warehouse personnel. Receives, stores and issues supplies and equipment. Maintains warehouse locations, selects supplies and equipment for issues and shipments. Manages the shelf-life program. Carries out housekeeping duties in the warehouse. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Ensures all receipts of supplies and equipment from deposits and other sources of supply are identified properly and are in a serviceable condition before storing.</li> <li>Performs warehouse validations and prepares the warehouse for inventories.</li> <li>Receives, inspects and stores materials in designated warehouse locations.</li> <li>Operates material handling equipment such as forklifts and pallet jacks.</li> <li>Prepares and issues materials for operational use or deployment.</li> <li>Conducts routine inventories to maintain accurate warehouse records.</li> <li>Ensures compliance with safety and security standards for storage.</li> <li>Maintains a clean and organized warehouse environment.</li> <li>Supports audits and inspections by providing accurate records and inventory data.</li> <li>Performs other duties as directed or assigned by the supervisor.</li> <li>Is responsible for HAZMAT and environmental functions.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment up to 10k forklift.</li> <li>High school diploma or equivalent required.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Working knowledge in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs is preferred.</li> <li>Proficiency in warehouse operations and inventory management systems preferred.</li> <li>One to two years' experience in a supply system or closely related function is preferred.</li> <li>Maximo experience is preferred.</li> </ul></p><p></p>

<p>We are seeking a detail-oriented and experienced Quality Engineer to join our dynamic team in the Oil & Gas sector in Oman. The ideal candidate will play a crucial role in ensuring that our products and processes meet rigorous quality standards and comply with industry regulations, contributing to the safety, reliability, and efficiency of our operations. Responsibilities: - Develop, implement, and maintain quality control systems and procedures to ensure compliance with industry standards and customer requirements. - Conduct regular inspections, audits, and assessments of processes, equipment, and materials to identify and address quality issues. - Collaborate with cross-functional teams including engineering, production, and supply chain to resolve quality-related problems and improve overall product quality. - Analyze quality data and generate reports to monitor performance and drive continuous improvement initiatives. - Support root cause analysis and corrective action processes for non-conformities and customer complaints. - Ensure adherence to safety and environmental regulations in all quality processes. - Provide training and guidance on quality standards and best practices to team members and stakeholders.</p><p>- Bachelor’s degree in Engineering, Quality Management, or a related field. - Minimum of 3 years experience in quality engineering within the Oil & Gas industry or a similar industrial environment. - Strong knowledge of quality management systems such as ISO 9001, API Q1, or equivalent standards. - Proficient in statistical analysis tools and quality control methodologies. - Excellent problem-solving skills with the ability to analyze data and implement effective solutions. - Strong communication and interpersonal skills to collaborate effectively across teams. - Ability to work independently and manage multiple priorities in a fast-paced environment. - Willingness to work on-site in Oman with occasional travel as required.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Oversee daily site operations to ensure projects are completed on time, within budget, and to specifications, minimizing delays and maximizing efficiency.</li><li>Coordinate with architects, engineers, and subcontractors, facilitating clear communication to ensure all project requirements are met without ambiguity.</li><li>Conduct regular site inspections to enforce compliance with safety regulations and industry standards, fostering a culture of safety among all personnel.</li><li>Manage on-site resources, including labor, materials, and equipment, strategically allocating them to optimize productivity and reduce waste.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Civil Engineering or a related field, providing foundational technical knowledge essential for effective site supervision.</li><li>Minimum of 5 years of experience in civil construction, demonstrating a proven track record of successfully managing multiple projects.</li><li>Possession of relevant certifications such as OSHA or PMP, showcasing a commitment to safety and project management excellence.</li><li>Experience in residential, commercial, or industrial construction, ensuring versatility in handling diverse project types.</li></ul><p></p></section>