وظائف مهندس مواد

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land and sea. The Incumbent must comply with all applicable International and Federal Transportation Laws, Regulations, Tariffs and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p><p>Principal Accountabilities</p><ul><li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li><li>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</li><li>Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</li><li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and Maintains Manifest logs.</li><li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</li><li>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</li><li>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</li><li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</li><li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li><li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li><li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li><li>Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.</li><li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority or other special requirements.</li><li>Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li><li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting and maintaining operation stock levels of 463L pallets, nets and other tie-down equipment located on-site.</li><li>Assists the WPM Custodian with inspecting and certification, record keeping and reporting the receipt and usage requirements.</li><li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li><li>Reports all lost, damaged, destroyed and modified containers to the CCO within 12 hours of discovery.</li><li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li><li>Receives/Ships all containers in JCM within 12 hours of receipt or departure.</li><li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li><li>Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.</li><li>Inspects cargo documentation, conducts Joint Inspections and certifies that cargo is built correctly and airworthy.</li><li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo and baggage.</li><li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p><p>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</p><p>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</p><p>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</p><p>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</p><p>Knowledge and understanding of MHE equipment operations and associated hazards required.</p><p>Will be required to receive training and operate material handling equipment.</p><p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p><p>High School diploma or equivalent required.</p><p>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</p><p>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems or other related experience.</p><p>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</p><p>Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</p><p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p><p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p><p>Ability to travel domestically and internationally.</p><p>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint preferred.</p><p>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</p><p></p></section>

<p>The QA/QC Engineer shall:</p><ul><li><p>Prepare, implement, monitor, revise and update the Quality Plan.</p></li><li><p>Develop, prepare, implement, and monitor all Contract Specific Quality Procedures and Work Instructions.</p></li><li><p>Review and monitor Sub-suppliers Quality Management Systems and quality performance.</p></li><li><p>Prepare, review, and monitor the implementation of the Inspection and Test Plans (ITP’s).</p></li><li><p>Report Quality activities as directed.</p></li><li><p>Liaise with Company on matters related to Quality as applicable.</p></li><li><p>Be responsible for auditing activities – internal, external, and follow up of Corrective Actions.</p></li><li><p>Be responsible for overall control, supervision and implementation of Contract quality and technical requirements; resolution of quality problems; preparation and maintenance of Contract quality records.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Shall have minimum of 15 years overall experience.</p></li><li><p>Shall have minimum of 8 years of relevant experience in oil and gas projects. Shall have the capability of developing and implementing quality system, quality plans, work procedures and inspection plans as directed.</p></li><li><p>Shall have minimum of 5 years’ experience of Quality leadership position.</p></li><li><p>Shall have minimum 5 years’ experience in the Middle East Region.</p></li><li><p>Shall have experience in quality management in projects covering design / engineering, procurement, construction, pre-commissioning and commissioning phases.</p></li><li><p>Shall have technical knowledge of inspection and exposed to multi discipline works of oil and gas construction field.</p></li><li><p>Shall be familiar with relevant codes used in oil and gas industries.</p></li><li><p>Preferably be familiar with practices such as Flawless Project Delivery (FPD) and Technical Integrity Verification (TIV).</p></li><li><p>Shall have Welding Inspection and Painting & Coating Qualification (CSWIP 3.1, B.Gas, or AWS-CWI) or an equivalent certification</p></li><li><p>Shall have at least ASNT level II in RT, UT, MT, PT and RTFI</p></li><li><p>Shall be a Registered Lead Assessor with IRCA, RABQSA or equivalent.</p></li></ul><p><br></p><ul><li><p>Shall be a Graduate Engineer in relevant discipline..</p></li><li><p>Shall be a Registered Lead Assessor with IRCA, RABQSA or equivalent. (Where equivalent is proposed, evidence of equivalence shall be provided).</p></li><li><p>Shall have Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent.</p></li><li><p>Shall have Coating /Painting-Bgas or NACE-Level-2</p></li><li><p>Shall have at least ASNT –TC-1A level II in RT</p></li></ul><p>Ability to conduct root cause analysis in a business process. Pro-active behaviors required to analyze QA trends and implement strategies to mitigate potential threats before escalation. </p><ul><li><p>Strong oral and written communication skills in English</p></li><li><p>Good knowledge and skills in quality audit</p></li><li><p>Good knowledge of MS Office</p></li></ul><p><br></p>

<p>The QA/QC Engineer shall:</p><ul><li><p>Prepare, implement, monitor, revise and update the Quality Plan.</p></li><li><p>Develop, prepare, implement, and monitor all Contract Specific Quality Procedures and Work Instructions.</p></li><li><p>Review and monitor Sub-suppliers Quality Management Systems and quality performance.</p></li><li><p>Prepare, review, and monitor the implementation of the Inspection and Test Plans (ITP’s).</p></li><li><p>Report Quality activities as directed.</p></li><li><p>Liaise with Company on matters related to Quality as applicable.</p></li><li><p>Be responsible for auditing activities – internal, external, and follow up of Corrective Actions.</p></li><li><p>Be responsible for overall control, supervision and implementation of Contract quality and technical requirements; resolution of quality problems; preparation and maintenance of Contract quality records.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Shall have minimum of 15 years overall experience.</p></li><li><p>Shall have minimum of 8 years of relevant experience in oil and gas projects. Shall have the capability of developing and implementing quality system, quality plans, work procedures and inspection plans as directed.</p></li><li><p>Shall have minimum of 5 years’ experience of Quality leadership position.</p></li><li><p>Shall have minimum 5 years’ experience in the Middle East Region.</p></li><li><p>Shall have experience in quality management in projects covering design / engineering, procurement, construction, pre-commissioning and commissioning phases.</p></li><li><p>Shall have technical knowledge of inspection and exposed to multi discipline works of oil and gas construction field.</p></li><li><p>Shall be familiar with relevant codes used in oil and gas industries.</p></li><li><p>Preferably be familiar with practices such as Flawless Project Delivery (FPD) and Technical Integrity Verification (TIV).</p></li><li><p>Shall have Welding Inspection and Painting & Coating Qualification (CSWIP 3.1, B.Gas, or AWS-CWI) or an equivalent certification</p></li><li><p>Shall have at least ASNT level II in RT, UT, MT, PT and RTFI</p></li><li><p>Shall be a Registered Lead Assessor with IRCA, RABQSA or equivalent.</p></li></ul><p><br></p><ul><li><p>Shall be a Graduate Engineer in relevant discipline..</p></li><li><p>Shall be a Registered Lead Assessor with IRCA, RABQSA or equivalent. (Where equivalent is proposed, evidence of equivalence shall be provided).</p></li><li><p>Shall have Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent.</p></li><li><p>Shall have Coating /Painting-Bgas or NACE-Level-2</p></li><li><p>Shall have at least ASNT –TC-1A level II in RT</p></li></ul><p>Ability to conduct root cause analysis in a business process. Pro-active behaviors required to analyze QA trends and implement strategies to mitigate potential threats before escalation. </p><ul><li><p>Strong oral and written communication skills in English</p></li><li><p>Good knowledge and skills in quality audit</p></li><li><p>Good knowledge of MS Office</p></li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description: EHS Senior EngineerRole<p><strong>EHS Senior Engineer</strong></p><br>Job Function<p><strong>Environment, Health &amp; Safety (EHS)</strong></p><br>Reporting To<p><strong>Project Manager</strong></p><br>Workplace Classification<p><strong>Site Based</strong></p><br>Role Summary<p>The EHS Senior Engineer is responsible for leading and implementing Environment, Health and Safety management systems across Power Transmission &amp; Distribution construction projects in Oman. The role ensures compliance with corporate EHS standards, client requirements, Omani regulations, and international best practices. The incumbent drives proactive risk management, promotes a strong safety culture, and supports the achievement of zero harm objectives through effective planning, monitoring, training, and continuous improvement initiatives.</p><br>Key Responsibilities<ul><li>Develop, implement, and monitor project-specific EHS plans, procedures, and risk control measures.</li><li>Ensure compliance with statutory requirements, client specifications, and company EHS management systems.</li><li>Conduct site inspections, audits, hazard identification, and risk assessments for transmission lines, substations, and associated construction activities.</li><li>Lead incident investigations, root cause analysis, and corrective action implementation.</li><li>Monitor contractor and subcontractor safety performance and ensure compliance with project EHS requirements.</li><li>Organize toolbox talks, safety campaigns, inductions, and awareness programs.</li><li>Review work permits, method statements, and job safety analyses before execution.</li><li>Track EHS performance indicators and prepare periodic reports for management and clients.</li><li>Coordinate emergency preparedness drills and ensure availability of emergency response resources.</li><li>Promote environmental protection measures including waste management, pollution prevention, and resource conservation.</li></ul>Key Interactions<p><strong>Internal:</strong> Project Manager, Construction Managers, Planning Engineers, QA/QC Team, HR, Procurement, and Site Supervisors to ensure safe project execution and compliance.</p><br><p><strong>External:</strong> Clients, Consultants, Government Authorities, Contractors, Subcontractors, and Auditors for regulatory compliance, inspections, reporting, and stakeholder coordination.</p><br>Knowledge &amp; Experience<p><strong>Minimum Qualifications:</strong>&nbsp;Diploma/Bachelor's Degree in Engineering or Science. NEBOSH IGC mandatory; additional HSE certifications preferred.</p><br><p><strong>Language Skills:</strong> Fluent in English; Arabic knowledge is advantageous.</p><br><p><strong>Experience:</strong> Minimum 8-12 years of EHS experience in construction projects, including at least 5 years in Power Transmission &amp; Distribution projects involving substations, overhead transmission lines, and electrical infrastructure.</p><br>Technical &amp; Behavioral Skills Required to Execute the Role<ul><li>Omani HSE regulations and international standards knowledge.</li><li>EHS auditing, incident investigation, and risk assessment expertise.</li><li>Construction safety management and permit-to-work systems.</li><li>Emergency response planning and crisis management.</li><li>Data analysis, reporting, and presentation skills.</li><li>Strong leadership, communication, influencing, and stakeholder management.</li><li>Problem-solving, decision-making, teamwork, and attention to detail.</li><li>Ability to work under pressure and manage multiple priorities effectively.</li></ul><br> </div>

<p>Electrical Maintenance: Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations. Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards. Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment. Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages. Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor. Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area. Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests Documentation : Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing. Continuous Improvement : Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards. Policies, Processes, Systems &amp; Procedures Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner. Health, Safety, Security &amp; Environment Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed. Related Assignments Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications: A technical certificate / Associate s Diploma in Electrical maintenance. Minimum Experience: 3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment. Skills: Practical Knowledge of relevant plant equipment Awareness of HSE &amp; quality standards Team work and effective collaboration skills ISO awareness/working knowledge is preferred</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title</b> Engineer I&amp;C Central Assets Management Grade Stream Commercial &amp; Downstream RPI Function Central Assets Management Location Oman Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Central Instru.&amp; Auto.Central Assets Management Direct reports 0 Job purpose Designs, analyzes, implements and maintain control systems to regulate and optimize various processes in the RPI areas, under Team Leader Control Systems scope, acting as team player and part of the site s management team using his/her technical expertise to develop solutions regarding quality problems of control system, including all aspects of maintaining control system asset installed based, supporting on new automation projects, and leading the troubleshooting/repair/ and maintaining control system equipment by: (1) manage and ensure the availability of the site s Emergency Shutdown System (ESD), the Distributed Control System (DCS), and PLC-based control loops while proactively promote process safety initiatives, (2) Develop solutions to maintenance and quality problems of control systems in Suhar plants (SR2),(3) supporting on new automation projects, and (4) Interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas, (5) Providing professional technical advice, guidance and support to the team, (6) Identify opportunities of improvement, as well as assess and support improvement proposals from others, and (7) Guide young engineers in related Control System matters; in order to ensure that the assets and equipment are available at all times, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ talent pipeline.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Scope RPI &amp; Plastic Assets (SR/AP, MAF, Plastics &amp; NGLE) Pressure transmitters These instruments measure the pressure of fluids or gases in pipes, tanks, and vessels. They are used to ensure that the process is operating within safe pressure limits. Temperature transmitters gauges, Thermowells, Thermocouples, Thermocouple Assemblies. These instruments measure the temperature of fluids or gases in various process equipment, such as heat exchangers, reactors, and distillation columns. They help to ensure that the process operates within the desired temperature range. Flow meters These instruments measure the flow rate of liquids and gases in pipes and vessels. They are used to monitor the amount of material being transferred between different process stages. Level transmitters These instruments measure the level of liquids and solids in tanks and vessels. They are used to ensure that tanks are not overfilled or emptied too quickly, which could result in safety hazards or process disruptions. Analyzers These instruments measure the chemical composition of process streams. They are used to monitor the quality of products and ensure that the process is operating within the required specifications Control valves / Instrument Manifold / Positioners. These are critical components that control the flow of fluids in process equipment. They are used to adjust the flow rate, pressure, and temperature of the process stream to maintain optimal process conditions. Safety relief valves These are critical components that protect equipment and personnel from overpressure conditions. They are designed to open automatically when the pressure exceeds a predetermined level, releasing excess pressure and preventing equipment damage or personnel injury. Distributed Control System (DCS) This refers to a system used to control complex processes in industries such as manufacturing, oil and gas, power generation, and more. DCS systems consist of multiple interconnected control elements that work together to monitor and manage various aspects of a process. Programmable Logic Control (PLC) A Programmable Logic Controller (PLC) is a specialized digital computer used in industrial and manufacturing settings to control and automate various processes and machinery. PLCs are designed to handle real-time control tasks, making them integral to the automation of complex systems. Emergency Shutdown System (ESD) An Emergency Shutdown System (ESD) is a safety mechanism implemented in industrial facilities and processes to bring the operation rapidly and automatically to a safe state in the event of an emergency or hazardous situation. The primary goal of an ESD system is to protect personnel, equipment, and the environment by quickly shutting down critical processes or equipment when conditions deviate from safe operating parameters. Machine Monitoring and Protection System A Machine Monitoring and Protection System is a specialized technology used in industrial settings to monitor, analyze, and safeguard the performance and condition of machinery and equipment. The primary purpose is to ensure the optimal operation of machines, prevent unexpected failures, and enhance overall productivity by providing real-time insights into the health and status of critical equipment. OT cyber security OT cybersecurity involves securing the practices and technologies used to monitor, detect, and control changes to OT infrastructure, ensuring the safety, integrity, and continuity of operations. OT includes systems like industrial control systems (ICS), supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and programmable logic controllers (PLC)</p><p>Key interactions Internal: The Senior/Control System Engineer will interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas. External: Vendors, contractors, manufacturers. Notable Working Conditions. Field Operations and office environment, Moderate to extensive computer screen use.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is a bachelor s degree in electrical / Electronic or Instrumentation Engineering or similar. Language requirements Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p></p></section>

<ul><li><p>We are looking for a chemical engineer/formulation chemist to develop formulas for products like rust removers, silicon sealants, Cpvc glue and similar products, We need a custom formulation, laboratory samples, performance testing and manufactuing experince of these products.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possesses a Bachelor's Degree or Diploma, or experience in this field.</p></li><li><p>Demonstrates 3+ years of experience in the chemical or related manufacturing industry, showcasing practical application.</p></li><li><p>Exhibits a strong understanding on how to produce these products and must know how to formulate them.</p></li></ul>

<p><br></p><p><b>About the Role</b></p><p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p>We are seeking an experienced Resident Network &amp; Security Support Engineer to join our team and provide dedicated onsite support at the Development Bank in Muscat. The successful candidate will be responsible for managing, maintaining, and supporting the organization's enterprise network and security infrastructure, ensuring high availability, optimal performance, and secure operations. This is a customer-facing resident role requiring strong hands-on expertise in Cisco networking technologies and Fortinet security solutions. The engineer will handle day-to-day operational support, incident management, troubleshooting, security operations, and infrastructure optimization while working closely with the customer's IT team to ensure business continuity and service excellence. Provide onsite operational support for the customer's enterprise network and security infrastructure. Configure, manage, and troubleshoot Cisco switches and enterprise networking equipment. Administer, monitor, and maintain Fortinet firewalls and security appliances. Monitor network performance, availability, and security to ensure optimal service delivery. Diagnose and resolve network connectivity, switching, routing, and firewall-related issues. Respond to incidents, perform root cause analysis, and implement corrective actions. Perform network and security configuration changes following approved change management procedures. Ensure compliance with security policies, standards, and best practices. Coordinate with vendor support teams, including Cisco and Fortinet, for issue escalation and resolution. Maintain accurate technical documentation, including network diagrams, configurations, and operational procedures. Perform preventive maintenance, firmware upgrades, and health checks on network and security devices. Collaborate with customer stakeholders to support infrastructure improvements and operational requirements. Provide timely status updates, technical reports, and recommendations to the customer and project management team. Participate in planned maintenance activities and provide support during critical incidents when required.</p><p><strong>Desired Candidate Profile</strong></p>Provide onsite operational support for the customer's enterprise network and security infrastructure. <br> Configure, manage, and troubleshoot Cisco switches and enterprise networking equipment. <br> Administer, monitor, and maintain Fortinet firewalls and security appliances. <br> Monitor network performance, availability, and security to ensure optimal service delivery. <br> Diagnose and resolve network connectivity, switching, routing, and firewall-related issues. <br> Respond to incidents, perform root cause analysis, and implement corrective actions. <br> Perform network and security configuration changes following approved change management procedures. <br> Ensure compliance with security policies, standards, and best practices. <br> Coordinate with vendor support teams, including Cisco and Fortinet, for issue escalation and resolution. <br> Maintain accurate technical documentation, including network diagrams, configurations, and operational procedures. <br> Perform preventive maintenance, firmware upgrades, and health checks on network and security devices. <br> Collaborate with customer stakeholders to support infrastructure improvements and operational requirements. <br> Provide timely status updates, technical reports, and recommendations to the customer and project management team. <br> Participate in planned maintenance activities and provide support during critical incidents when required.

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p>We are looking for a skilled Network Engineer to join our team in Muscat. Key Skills: Fortinet (FortiGate Firewall) administration and troubleshooting Email Security solutions (Microsoft Defender, FortiMail, Proofpoint, Mimecast, or similar) Routing &amp; Switching (Cisco/Fortinet) VPN, NAT, IPS/IDS, SD-WAN Network monitoring and performance optimization Troubleshooting LAN/WAN and network security incidents</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have hands-on experience in enterprise networking, network security, and email security solutions.</p><p>Requirements:</p><ul><li>410 years of relevant experience</li><li>Strong knowledge of network security best practices</li><li>Relevant certifications (NSE, CCNA/CCNP, or equivalent) are an advantage</li><li>Immediate joiners will be preferred</li></ul>

<p>Job Purpose: Control and advise all the technical and operational aspects of the vessel under OSMC s management. Provide necessary marine technical expertise in shipping matters to OSMC. Establish and maintain operational standards to enhance Safety, efficiency, tradability, and reliability of the vessel. Responsible for controlling and managing actual cost and budget for the vessels. Present requirement is for Very Large Crude Carriers, LR/MR Product and Chemical tankers, Very Large Bulk Carriers and Supramax Bulk Carriers.</p><p>Key Accountabilities</p><p>Supervision of Subordinates Support and supervise the vessels command in all aspects.</p><p>Instruction Manual Establish and maintain operations policies, procedures, and instruction manuals to ensure safe, reliable, and efficient operation including loading, discharging, gas free and docking etc. and supervise the provision of other services to the vessel.</p><p>Certificate &amp; Legal Document Validation Supervise expire date of all statutory and class certificates and documents to ensure they are as per legislative requirements and in accordance with OSMC s policies. Insurance, finance, crewing quality certificates by relevant departments Familiar with relating contract, agreement including technical management of operations activities, IMO &amp; Class rules and regulations.</p><p>Port Authority Coordination Liaises, as appropriate, with terminal operators at loading/unloading ports, customers, joint ship owners, service engineer and shipping agents store suppliers etc. Prepares repair and docking specification beforehand. Draw up estimate to obtain approval by the Fleet Manager as per requirement. Attend DD and co-ordinate with shipyard for safe and successful DD completion. Supervise, upkeep and maintenance as per scheduled in accordance with approved plan, making the necessary occasional visits.</p><p>System Audit Supervise ship maneuvering and mooring, etc. and ensure all established policies and processes are correctly implemented. Discusses and resolves in conjunction with Marine Manager and Fleet Manager, failure of machineries, unsatisfactory performance, etc. Administer in house ISM system, conduct audit of the vessel and in-house systems and conduct evaluation of the crew etc. in conjunction with ISM system.</p><p>Budgets and Plans Contribute to the preparation of the technical department budget and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues and areas of unsatisfactory performance are identified, rectified promptly and potential performance improvement opportunities are capitalized upon. Control and manage actual and budget for maintenance, Ship Store, LO, Medicines etc..</p><p>Policies, Systems, Processes &amp; Procedures Recommend improvements to departmental procedure and direct the implementation of instructions and controls covering a specific area of technical activity so that all relevant procedural/legislative requirements are fulfilled while delivering a quality, cost-effective service. Maintain a particular and clear PMS system ensuring the vessel is always meeting OSMC s standards. Ensure accurate and swift sign off and approval of all stores and requisitions, ensuring that no outstanding payments are impacting OSMC s relationship to its suppliers.</p><p>Continuous Improvement Stimulate subordinates and contribute to the identification of opportunities for continuous improvement of technical systems, processes and practices considering international best practice , improvement of business processes, cost reduction and productivity improvement.</p><p>MIS and Reports Prepare departmental MIS statements and reports timely and accurately to meet OSC and department requirements, policies and standards.</p><p>Safety, Quality &amp; Environment Ensure compliance to all relevant safety, quality and environmental management procedures and controls to guarantee employee safety, legislative compliance, delivery of high-quality product/service and a responsible environmental attitude.</p><p>Operating Activities Ensure timely condition monitoring of machinery by maintenance system to facilitate smooth operation. Ensure maintenance of the validity of all certificates and documents as per OSC policies and guidelines. Follow and co-ordinate with vessel to maintain all defect reports. Follow and co-ordinate with vessel to maintain inventory of all critical spares.</p><p>Document control and filing Ensure SMS document control and filing for duty ship.</p><p>Maintenance Visits Manage the upkeep and maintenance on board by making occasional/periodic visit, as per the set schedule</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Qualification: Bachelor of Engineering in Marine/Mechanical/Electrical or Naval Arch.</li><li>Chief Engineer Certificate of Competency (Motor or Steam, as required).</li><li>Minimum Experience: Minimum of 10 years of relevant experience, including at least 1 year as a Technical Superintendent or 3 years as a Chief Engineer onboard a Foreign-Going (F.G.) vessel.</li></ul><p>Job Specific Skills:</p><ul><li>Detail oriented</li><li>Driven by getting things done correct.</li><li>Structured Communication</li><li>Organized in work.</li><li>Good Technical Knowledge</li></ul><p>Competencies:</p><ul><li>Marine Engineering Management</li><li>Planned &amp; Unplanned Maintenance</li><li>Vessel Technical Performance &amp; Monitoring</li><li>Spares /Stores Supply Chain Management</li><li>Dry Docking &amp; Repairs</li><li>Sale and Purchase Management</li><li>Technical Investigation &amp; Risk Analysis.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>The programme includes the development of a state-of-the-art port facility with the capacity to process millions of tonnes of bulk cargo annually, incorporating marine infrastructure, landside logistics, transportation links, utilities, and operational facilities. Scheduled for completion later this decade, the project represents one of the region's most significant port and industrial infrastructure investments.</span></p><br><p><span>This is a unique opportunity to contribute to a complex, large-scale development that will play a pivotal role in supporting economic diversification, industrial growth, and global supply chain connectivity. Candidates will have the chance to work alongside multidisciplinary teams in a dynamic environment, helping to shape a strategic piece of infrastructure with long-term regional impact.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><ul><li><span>Overseeing the execution and compliance of all project contracts.</span></li><li><span>Supporting the resident engineer in drafting and issuing contractual correspondence to contractors.</span></li><li><span>Ensuring delivery aligns fully with contract terms and agreed conditions.</span></li><li><span>Working closely with the resident engineer, team leader and client to maintain contract adherence across all project activities.</span></li><li><span>Works collaboratively towards the common goal of net zero carbon transition and share responsibility for the proactive identification and management of the associated carbon emissions and reductions during the delivery of work.</span></li></ul><p><span><strong>You’ll need to have:</strong></span></p><br><ul><li><span>A relevant bachelor’s degree (postgraduate qualification in contract management preferred).</span></li><li><span>Progressing toward chartership with a recognised professional body and ongoing professional development.</span></li><li><span>Minimum 20 years’ experience in project/contract management on major construction or infrastructure projects.</span></li><li><span>Proven experience preparing, managing, and overseeing large-scale contracts.</span></li><li><span>Strong knowledge of FIDIC conditions of contract (preferred).</span></li><li><span>Experience in a similar role on at least two port construction projects valued at USD 400M+ each.</span></li></ul><p><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well: </strong>We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise: </strong>We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing:</strong> We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><br><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>1. Material Receipt &amp; Inspection Coordination</strong> <ul> <li>Receive incoming materials, equipment, and consumables.</li> <li>Verify materials against:</li> <ul> <li>Purchase Orders (PO)</li> <li>Delivery Challans / Packing Lists</li> </ul> <li>Coordinate with QA/QC for inspection and clearance.</li> <li>Ensure proper tagging and identification of materials.</li> </ul> <strong>2. Inventory Management</strong> <ul> <li>Maintain accurate stock records (physical and system-based).</li> <li>Monitor stock levels and notify for reordering.</li> <li>Conduct periodic stock verification and reconciliation.</li> <li>Maintain minimum/maximum inventory levels.</li> </ul> <strong>3. Storage &amp; Preservation</strong> <ul> <li>Ensure proper storage of materials as per:</li> <ul> <li>Manufacturer guidelines</li> <li>Project requirements</li> </ul> <li>Implement preservation measures to prevent:</li> <ul> <li>Corrosion</li> <li>Damage</li> <li>Deterioration</li> </ul> <li>Maintain separate storage for critical, consumable, and hazardous materials.</li> </ul> <strong>4. Material Issue &amp; Tracking</strong> <ul> <li>Issue materials against approved Material Requisition Slips (MRS).</li> <li>Track material consumption for project activities.</li> <li>Ensure FIFO (First-In-First-Out) / FEFO where applicable.</li> <li>Maintain proper records of issued materials.</li> </ul> <strong>5. Documentation &amp; Record Keeping</strong> <ul> <li>Maintain accurate records of:</li> <ul> <li>GRN (Goods Receipt Notes)</li> <li>Material Issue Registers</li> <li>Stock Registers</li> </ul> </ul></div></section>

<p>Prepare, issue, and manage Purchase Orders based on inventory requirements and material requisitions. Prepare, verify, and track all international trade documentation, Invoices, Packing Lists, Certificates of Origin, Bills of Lading (B/L)</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Graphic Designer is responsible for developing and maintaining the school's visual identity across all digital and print platforms. The role involves creating compelling visual communications that promote the school's brand, engage students, parents, staff, and the wider community, and support the school's marketing and communication objectives.</p><p>The Graphic Designer leads the development of creative concepts, branding initiatives, marketing campaigns, and promotional materials while ensuring consistency with the school's identity and values. The role also includes photography, videography, website updates, social media design, and collaboration with various departments to produce high-quality visual content.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Branding and Corporate Identity</p><ol><li>Develop, maintain, and strengthen the school's visual identity across all communication channels.</li><li>Design, redesign, and update the school's logo, brand elements, and visual identity when required.</li><li>Create branding guidelines and ensure consistency in the use of logos, colours, typography, and graphic elements.</li><li>Design school uniforms, promotional merchandise, signage, banners, and branded materials.</li><li>Ensure all published materials reflect the school's professional image and branding standards.</li></ol><p>Graphic Design</p><ol><li>Design high-quality promotional and educational materials including:</li></ol><ul><li>Brochures</li><li>Flyers</li><li>Posters</li><li>Banners</li><li>Certificates</li><li>Invitations</li><li>Newsletters</li><li>Magazines</li><li>Reports</li><li>Presentation templates</li><li>Infographics</li><li>School publications</li></ul><ol><li>Create artwork for school events, campaigns, exhibitions, competitions, graduations, and official ceremonies.</li><li>Prepare designs for both digital publishing and professional printing.</li><li>Review all artwork for accuracy and quality before publication or printing.</li><li>Coordinate with external printing companies and suppliers to ensure timely delivery of materials.</li></ol><p>Marketing and Communications</p><ol><li>Support the school's marketing and admissions strategies through creative visual campaigns.</li><li>Develop creative concepts that effectively communicate key messages to target audiences.</li><li>Introduce innovative marketing ideas that enhance the school's visibility and reputation.</li><li>Research current design trends and recommend creative approaches that strengthen the school's marketing efforts.</li><li>Advise the Head of Administration on effective visual communication and branding strategies.</li></ol><p>Social Media and Digital Content</p><ol><li>Design engaging content for all social media platforms.</li><li>Create graphics, advertisements, announcements, reels, stories, and promotional campaigns.</li><li>Ensure that all social media content maintains a consistent visual identity.</li><li>Produce creative digital content that increases audience engagement.</li><li>Work closely with the admissions and administration teams to promote school events and achievements.</li></ol><p>Photography and Videography</p><ol><li>Capture professional photographs during school events, activities, competitions, ceremonies, and daily school life.</li><li>Record high-quality videos for promotional and educational purposes.</li><li>Edit photographs and videos using professional software.</li><li>Produce promotional videos highlighting school programs, facilities, achievements, and events.</li><li>Maintain and organize a digital archive of photographs, videos, and media assets.</li></ol><p>Website Management</p><ol><li>Update and maintain the school's website with current information, photographs, videos, news, and promotional content.</li><li>Ensure website graphics are visually appealing and aligned with the school's branding.</li><li>Collaborate with relevant departments to keep website content accurate and up to date.</li></ol><p>Creative Planning and Project Management</p><ol><li>Meet regularly with the Head of Administration to discuss design requests, marketing initiatives, and project priorities.</li><li>Develop creative concepts by studying project objectives, target audiences, and communication goals.</li><li>Present design concepts for approval and incorporate feedback professionally.</li><li>Manage multiple projects simultaneously while meeting agreed deadlines.</li><li>Coordinate with internal departments and external vendors to complete projects efficiently.</li></ol><p>Professional Development</p><ol><li>Stay informed about the latest trends in graphic design, branding, photography, videography, digital marketing, artificial intelligence tools, and visual communication.</li><li>Continuously improve technical skills by participating in workshops, professional development activities, and independent learning.</li></ol><p>Additional Responsibilities</p><ol><li>Attend school events, exhibitions, celebrations, and educational trips when required to provide photography, videography, and promotional coverage.</li><li>Assist with any additional design, branding, marketing, or communication projects assigned by the Head of Administration or School Leadership.</li><li>Maintain confidentiality regarding all school information, documents, and media content.</li><li>Work collaboratively with all departments to support the school's strategic objectives.</li><li>Perform any other duties reasonably assigned that are consistent with the nature of the position.</li></ol><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: System Senior Engineer</p><p>Reports To: IT Infrastructure Manager / Systems Manager</p><p>Job Details</p><p>Number of Vacancies: 2 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All Governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The System Senior Engineer is responsible for supporting the administration, maintenance, and optimization of the organization's IT infrastructure and enterprise systems. The role ensures the availability, reliability, security, and performance of servers, operating systems, virtualization platforms, and related infrastructure while providing technical support for system implementation, monitoring, troubleshooting, and continuous improvement.</p><p>Key Responsibilities</p><p>Install, configure, monitor, and maintain servers, operating systems, and enterprise infrastructure.</p><p>Monitor system performance, availability, and capacity to ensure reliable business operations.</p><p>Perform system administration tasks, including user account management, access control, and system configuration.</p><p>Troubleshoot and resolve system, server, and infrastructure-related incidents.</p><p>Support the implementation of new systems, upgrades, patches, and infrastructure enhancements.</p><p>Perform system health checks, preventive maintenance, and performance optimization.</p><p>Assist in backup, disaster recovery, and business continuity activities.</p><p>Ensure compliance with IT security policies and infrastructure standards.</p><p>Maintain technical documentation, system configurations, and operational procedures.</p><p>Coordinate with vendors and technical teams to resolve infrastructure issues.</p><p>Participate in infrastructure projects, testing, and technology improvement initiatives.</p><p>Perform any other duties assigned by management within the scope of the role.</p><p>Working Conditions</p><p>Office-based work environment.</p><p>Regular collaboration with IT Infrastructure, Network, Cybersecurity, and business teams.</p><p>May occasionally be required to provide after-hours support during planned maintenance, system upgrades, or critical incidents.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor's Degree in Information Technology, Computer Science, Information Systems, Software Engineering, Computer Engineering, or a related field.</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of Windows Server and Linux operating systems.</li><li>Understanding of Active Directory, DNS, DHCP, and Group Policy concepts.</li><li>Basic understanding of virtualization technologies such as VMware or Hyper-V.</li><li>Familiarity with backup and recovery solutions.</li><li>Basic knowledge of networking concepts, including TCP/IP, LAN/WAN, and network security.</li><li>Understanding of cloud computing platforms (Microsoft Azure or AWS) is an advantage.</li><li>Familiarity with Microsoft Office applications.</li><li>Strong analytical and troubleshooting skills.</li></ul><h2>Soft Skills</h2><ul><li>Strong problem-solving and analytical abilities.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to work effectively in a team environment.</li><li>Good organizational and time management skills.</li><li>Attention to detail and commitment to service quality.</li><li>Ability to prioritize tasks and work under pressure.</li><li>Willingness to learn emerging technologies and continuously develop technical skills.</li></ul><p></p></section>

<p>PDO approved GRE inspector - (High Pressure - Non Metallic) </p><br><ol><li><p>Maintain records of calibration, inspection and testing equipment.</p></li><li><p>Ensure availability of appropriate version of applicable work documents.</p></li><li><p>Witness qualification procedures, tests and certify the results.</p></li><li><p>Provide feed-back to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day to-day quality issues.</p></li></ol><br><br><br><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: Shall be HNC or HND with minimum of 4 years of inspection experience in construction industries out of which 2 years shall be in the construction of oil and gas facilities on relevant Non-metallic pipeline / piping construction. </p><p>2 years of experience working with Non-metallic manufacturer may be considered to give equivalent competence. </p>