وظائف مهندس تفتيش هندسي في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To provide guidance, insights, and execute with autonomy, the refinery hydrocarbon accounting and reconciliation. This is achieved by practicing defined strategies, plans, and programs for the end-to-end process of comparing and reconciling the production of refinery hydrocarbons among the parties involved in production and sales under the purview of Hydrocarbon Accounting leadership. The individual will act as the Subject Matter Expert for HCA Refinery accounting reconciliation, including measurement, data collection, validation, reconciliation, and reporting.</p><p>1) Provide guidance and insights and ensures that hydrocarbon accounting procedures and reports are prepared accurately and according to agreed schedules. Additionally, conducts routine reconciliation of production and off-take satisfactorily in liaison with reconciliation engineers, Production Planning, Scheduling, and the Financial Accounting team.</p><p>2) Provide guidance and insights while developing strategies for Fuel &amp; loss accounting in accordance with high management performance standards, focusing on control/reduction planning.</p><p>3) Offers guidance for Refinery Production Accounting, including the formulation and drafting of Crude processing and finished product mass balance reports to provide qualitative input to stakeholders.</p><p>4) Provide guidance, insights, and data field analysis to address production difficulties effectively.</p><p>5) Execute the reconciliation of hydrocarbon production data with third parties, ensuring alignment with production targets while tracking and controlling production.</p><p>6) Manage the accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p>7) Guide and coach younger staff in HCA Refinery Reconciliation processes, identifying potential losses or discrepancies in the production and sales process, implementing corrective actions to prevent future losses, improve efficiency, and ensure accurate compensation for all parties involved in the production and sales chain.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by IT hardware and software platforms, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><b>Main Accountabilities</b></p><p><b>Scope Refinery Hydrocarbon Accounting and Reconciliation:</b></p><p>Develop and assess Hydrocarbon accounting procedures and ensure that accounting reports are prepared accurately and according to agreed schedules for routine production reconciliation.</p><p>Conduct off-take activities satisfactorily in collaboration with the Senior Engineer in Production Planning, Scheduling, and Finance Accounting.</p><p>Devise strategies for fuel &amp; loss accounting in alignment with Heat-mass balance (HMB) standards and plan for control/reduction.</p><p>Formulate &amp; draft crude processing and finished products mass balance reports to provide qualitative input to stakeholders.</p><p>Review field data analysis to adopt plans that overcome production difficulties.</p><p>Account for the hydrocarbons produced and reconcile data with third parties while effectively tracking and controlling production to ensure meeting production targets. Handle accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p><b>General</b> Through active participations, recommend actions and manage Mass balance data to ensure the optimum use of resources.</p><p>Contribute to the achievement of the approved Performance Objectives for the Section / Department in line with the Company Performance framework</p><p><b>Data collection &amp; Master Data Validation</b></p><p>Manage and maintain the company's records of movements with the operation departments, and ensure updated changes are captured in a timely manner.</p><p>Ensure high quality data is recorded into reconciliation tools &amp; accurate mass balance information in ERP.</p><p>Manage the database and produce monthly reports of each production facilities.</p><p>Maintain database and prepare report for deferment analysis, plant production opportunity losses and related statistics.</p><p>Enable the accurate Master data management for ERP &amp; Reconciliation application.</p><p>Validate the accuracy of the data collected by comparing it to other sources of data and industry standards.</p><p><b>System development.</b></p><p>Execute hydrocarbon accounting activities and maintain the reporting system.</p><p>Ensure that product yields and quantities are continuously monitored, analysing performance deviations, and initiating investigations for any deviations. Determine corrective actions as necessary.</p><p>Prepare internal and external daily and monthly management production reports, ensuring that the required report quality is achieved and that reports are issued in an effective and timely manner.</p><p>Prepare various ad hoc reports related to hydrocarbon deliveries and inventory.</p><p>Conduct daily analysis of production, identifying production losses, and highlighting production optimization opportunities.</p><p>Administer procurement and sales contracts related to hydrocarbon accounting activities.</p><p>Reconcile accounts and generate various reports related to refined product exports.</p><p>Perform necessary month and year-end closing activities.</p><p>Analyse the Process historian data for movement reconciliation.</p><p>Facilitate hydrocarbon accounting auditing and provide all required inputs as requested.</p><p>Provide input for monthly performance monitoring reviews (PMR), follow up on observations, and close out any identified gaps</p><p><b>Supervision</b></p><p>Provide opportunities for training and development of employees under his/her direction, assess their progress and suggest gap closing program</p><p><b>Policies, Systems, Processes &amp; Procedures</b></p><p>Implement approved Section / Department policies, processes, systems, standards, and procedures to support execution of the Section s / Department work programs in line with Company and International standards.</p><p><b>Innovation and Continuous Improvement</b></p><p>Design and implement new tools and techniques to improve the quality and efficiency of operational processes.</p><p>Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with international standards to define intelligent solutions for issues confronting the function.</p><p>Review of system Validation, Process control &amp; bringing more Automation, Dashboard reporting.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Education requirements</b> Minimum Qualifications for this position are bachelor s degree in chemical engineering or similar</p><p><b>Language</b> Excellent knowledge of written, read, and spoken English (required)</p><p><b>Background and experience</b></p><p><b>Competencies and skills</b></p><p>8+ years of relevant experience</p><p>Demonstrated experience in the Oil &amp; Energy sector, with emphasis in Downstream (Refinery Operations &amp; Processes)</p><p>Experience in reading and analyse benchmarking activities</p><p>Process Reconciliation Tools. (Preferably Sigmafine)</p><p>Process Historian, IT interfaces</p><p>Hydrocarbon Contract management,</p><p>Performance analysis, assessment with Analytical &amp; Reporting tools (SAP - BW/BI, Power BI)</p><p>Project management</p><p>Financial advice and support to business projects</p><p>Have a sound knowledge of API / ASTM standard for the quantity conversion.</p><p>Have a sound knowledge of SAP transactions, Product pricing, Production cost accounting &amp; gross margin analysis.</p><p><b>Soft:</b></p><p>Detailed oriented with a self-starter attitude.</p><p>Excellent Organization and time management</p><p>Result oriented.</p><p>Communication skill verbal and written</p><p>Detailed Analytical &amp; Accurate Reporting skills</p><p>Personal and Team Accountability</p><p>Decisiveness</p><p>Problem Solving Skills</p><p>Work Prioritization, Planning and Organizing</p><p>Ability to work under pressure and handle sensitive/critical issues effectively.</p><p><b>Technical:</b></p><p>Strong computer skills, including proficiency in Microsoft Word, Excel, Vision, and PowerPoint</p><p>Excellent writer (technical and non-technical)</p><p>Application Knowledge for HCA accounting &amp; reconciliation,</p><p>Knowledge of ERP configuration, ERP transactions, rules, and regulations</p><p>Knowledge of Policies &amp; Procedure of business process management</p><p>Knowledge of Laboratory Processes.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Foreman</b> in <b>Oman</b>. Our client is a reputed organization in the <b>Solar PV / Construction</b> sector seeking skilled, motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise electrical installation activities at Solar PV construction sites.<br></li><li>Lead and coordinate electrical crews of approximately 10–15 workers.<br></li><li>Interpret electrical drawings, layouts, schematics, and Solar PV installation plans.<br></li><li>Monitor electrical works to ensure installations comply with approved drawings and project requirements.<br></li><li>Coordinate day-to-day site activities and allocate work effectively among electricians and technicians.<br></li><li>Inspect electrical and PV installation work and identify technical or workmanship issues.<br></li><li>Ensure safe electrical working practices are followed during site execution.<br></li><li>Support timely completion of Solar PV electrical construction activities according to project schedules.<br></li></ul>Required Skills<br><ol><li><b>Solar PV Installation:</b> Hands-on experience with electrical installation activities on Solar PV projects.<br></li><li><b>Electrical Site Supervision:</b> Ability to supervise electrical construction activities and monitor site execution.<br></li><li><b>Drawing Interpretation:</b> Ability to read and understand electrical and PV construction drawings.<br></li><li><b>Crew Management:</b> Experience managing and coordinating crews of approximately 10–15 workers.<br></li><li><b>Electrical Construction:</b> Strong practical knowledge gained through electrician/foreman experience in construction environments.<br></li></ol>Preferred Skills<br><ul><li>Solar PV construction quality inspection knowledge.<br></li><li>Site coordination and work-planning capability.<br></li><li>Familiarity with electrical safety practices applicable to Solar PV construction.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>8–10 years of experience as an electrician/foreman in construction</b>, including a <b>minimum of 3 years in Solar PV installations</b>. Candidates should have practical site supervision experience and be capable of independently managing electrical crews of 10–15 workers.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma / ITI in Electrical<br></li><li><b>Preferred:</b><br></li><li><b>Additional:</b> Valid trade certification; Solar PV installation experience mandatory<br></li></ul>Contact No-9786888866<br><br> </div>

<p>We are seeking an experienced MEP Coordinator to join a prestigious large-scale mixed-use development project in Oman. The successful candidate will oversee the coordination, execution, and delivery of Mechanical, Electrical, and Plumbing (MEP) works throughout the project lifecycle, ensuring compliance with international standards, project specifications, quality requirements, and construction schedules. This role requires strong technical expertise, stakeholder management skills, and extensive experience working on complex mega construction projects.</p><p>Key Responsibilities</p><ul><li>Coordinate all Mechanical, Electrical and Plumbing (MEP) activities from design through construction and final handover.</li><li>Review MEP designs, drawings, technical specifications, and shop drawings to ensure compliance with project requirements.</li><li>Coordinate interfaces between consultants, contractors, suppliers, utility providers, and government authorities.</li><li>Monitor project progress, quality, safety, cost, and schedule performance for all MEP works.</li><li>Identify project risks, technical issues, and construction conflicts, implementing practical solutions to minimize delays.</li><li>Conduct regular site inspections to ensure installation works comply with approved drawings, specifications, and international standards.</li><li>Review contractor submissions, RFIs, material approvals, method statements, and inspection requests.</li><li>Support value engineering initiatives and recommend technical improvements where appropriate.</li><li>Manage post-contract matters including technical variations, claims, and coordination issues.</li><li>Ensure timely reporting of project progress, risks, and key milestones to project management.</li><li>Monitor contractor performance and ensure compliance with contractual obligations.</li><li>Support project commissioning, testing, handover, and close-out activities.</li><li>Ensure compliance with all Quality, Health, Safety and Environmental (QHSE) requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements</h2><ul><li>Bachelor's Degree in Mechanical Engineering (or closely related engineering discipline).</li><li>Minimum 15 years of total experience within the construction industry.</li><li>At least 5 years' experience as an MEP Coordinator on large-scale mega construction projects.</li><li>Previous experience working within a PMC or Engineering Consultancy environment is highly preferred.</li><li>Strong experience coordinating Mechanical, Electrical and Plumbing systems across multidisciplinary projects.</li><li>Proven knowledge of project planning, construction coordination, technical reviews, commissioning, and project delivery.</li><li>Experience coordinating with consultants, contractors, government authorities, and utility providers.</li><li>Excellent understanding of international engineering standards and local construction regulations.</li><li>Strong knowledge of project management principles, risk management, quality assurance, and contract administration.</li><li>PMP Certification is considered an advantage.</li></ul><h2>Key Competencies</h2><ul><li>MEP Design &amp; Construction Coordination</li><li>Project Management</li><li>Technical Review &amp; Design Coordination</li><li>Quality Assurance</li><li>Risk Management</li><li>Vendor &amp; Contractor Management</li><li>Stakeholder Management</li><li>Construction Planning</li><li>Problem Solving</li><li>Leadership &amp; Decision Making</li><li>Communication &amp; Negotiation</li><li>Report Writing</li></ul><h2>Preferred Project Experience</h2>Candidates with experience delivering one or more of the following project types will be highly regarded:<ul><li>Mixed-use developments</li><li>Commercial buildings</li><li>High-rise developments</li><li>Hospitality projects</li><li>Residential communities</li><li>Infrastructure developments</li><li>Smart city or sustainable development projects</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>JOB PURPOSE:</b> The job holder will be responsible for overseeing a team of Field Services Technicians and ensuring that all service requests are completed in a timely and efficient manner. You will be responsible for maintaining a high level of customer satisfaction by ensuring that all service requests are resolved to the customer's satisfaction.</p> <p><b>KEY ACCOUNTABILITIES</b></p> <p><b>Field Service Know-How/ Planning and Control of Site Work Activities/ Control of Tools and Equipments/ Asset Inventories:</b></p> <ul> <li>Oversee a team of Field Services Technicians and ensure that all service requests are completed in a timely and efficient manner.</li> <li>Schedule and assign work to Field Services Technicians, ensuring that the workload is distributed evenly.</li> <li>Monitor the progress of service requests and take appropriate action to ensure that they are resolved within the agreed-upon timeframe.</li> <li>Ensure that all Field Services Technicians are trained and equipped to provide excellent service to our customers.</li> <li>Maintain a high level of customer satisfaction by ensuring that all service requests are resolved to the customer's satisfaction.</li> <li>Keep accurate records of service requests, including the nature of the problem, the action taken, and the resolution.</li> <li>Provide regular reports to management on the performance of the Field Services team.</li> <li>Develop and implement strategies to improve the efficiency and effectiveness of the Field Services team.</li> <li>Ensure that all Field Services Technicians comply with all company policies and procedures, including safety and security policies.</li> <li>Manage and prioritize tasks for the field services team to ensure that all work is completed on time and within budget.</li> <li>Monitor the performance and documentation of all tests mentioned in the Inspection Test Plan at site.</li> <li>Filling FIR &amp; NCR and problem solving at site including after sales inspections</li> <li>Build a strong and close working relationship with clients.</li> <li>Attend progress and coordination meetings to monitor all related project activities.</li> <li>Review method statement for site installation.</li> <li>Review theoretical training material i.e., presentation, animation, photos, and videos.</li> <li>Giving theoretical and practical training.</li> <li>Attending customer calls/emails for emergency work</li> <li>Conduct, evaluate and witness all testing activities related to the installed pipes.</li> </ul> <p><b>HSE:</b> Comply with relevant safety, quality and environmental control procedures and instructions</p> <ul> <li>Use personal protective equipment and safety gear when performing assigned tasks</li> <li>Keep operational areas clean and well organized to prevent incidents and accidents</li> <li>Report on unsafe acts, incidents or safety violations</li> <li>Develop a safety culture by ensuring all staff comply with HSE policies and procedures</li> <li>Participate in QHSE audits, incident reporting and review of QHSE performances as required</li> </ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><strong>Required Qualifications:</strong></p> <ul> <li>High school diploma or equivalent</li> </ul> <p><strong>Preferred Experience:</strong></p> <ul> <li>3-4 years of experience in a similar role.</li> </ul> <p><strong>Job-Specific Skills:</strong></p> <ul> <li>Strong leadership skills with the ability to motivate and manage a team.</li> </ul> <p><strong>Core Competencies:</strong></p> <ul> <li>Excellent communication skills, both verbal and written.</li> <li>Strong customer service skills.</li> <li>Ability to work under pressure and meet deadlines.</li> <li>Strong problem-solving skills.</li> <li>Excellent organizational skills.</li> <li>Willingness to travel frequently to customer sites.</li> </ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job purpose: <br>Lead and oversee all commercial, feedstock sourcing, crude supply, logistics, and contract management activities for the business. Develop and execute commercial strategies that optimize profitability, secure reliable feedstock supply and product sales, strengthen stakeholder relationships, and ensure compliance with corporate governance and regulatory requirements. <br>Deliver comprehensive planning and execution of end-to-end commercial refining business in terms of crude oil purchases and products sales-related tasks under the direct supervision of head of Commercial <br><br>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Tasks and Responsibilities: <br><br>Lead, manage, and coordinate the Commercial Team, including Crude Supply and Product Commercial functions, ensuring alignment with the Company's strategic, operational, and financial objectives. <br>Develop and implement integrated commercial strategies covering feedstock procurement, refinery optimization, product commercialization, and margin enhancement across the entire refining value chain. <br>Oversee crude oil sourcing, supply portfolio management, and feedstock optimization activities to ensure security of supply, cost competitiveness, and operational reliability. <br>Direct product commercialization activities, including domestic and international sales strategies, customer relationship management, product placement, and market development initiatives. <br>Establish and maintain strategic relationships with crude suppliers, product customers, traders, national oil companies, government entities, terminal operators, logistics providers, and key industry stakeholders. <br>Lead all major commercial negotiations and oversee the drafting, review, execution, and management of crude supply agreements, product sales agreements, storage contracts, logistics agreements, and other commercial arrangements. <br>Ensure optimization of refinery margins by balancing feedstock economics, refinery yields, product market opportunities, logistics costs, and commercial risks. <br>Provide commercial leadership in pricing methodologies, crude and product valuation, formula pricing, market indexation, risk management, futures markets, and hedging strategies. <br>Monitor and analyze regional and international crude oil, refined products, freight, and logistics markets and provide strategic recommendations to maximize commercial value. <br>Guide the Commercial Team in identifying and developing new business opportunities, strategic partnerships, trading opportunities, and revenue enhancement initiatives. <br>Oversee end-to-end supply chain interfaces between Crude Supply, Refinery Planning, Operations, Product Marketing, Logistics, and Shipping functions to ensure seamless execution of commercial activities. <br>Ensure effective management of crude receipts, inventory positions, product lifting schedules, vessel nominations, logistics activities, and contractual obligations. <br>Provide strategic direction and governance for all quantity and quality assurance activities involving surveyors, laboratories, terminals, vessels, and inspection companies. <br>Lead commercial support for refinery optimization initiatives by ensuring alignment between crude procurement strategies and product marketing requirements. <br>Oversee customs compliance, import and export requirements, duty exemptions, regulatory approvals, and documentation processes related to crude and product transactions. <br>Manage and resolve commercial disputes and claims involving suppliers, customers, service providers, and counterparties, including pricing disputes, quantity and quality claims, demurrage, contractual non-performance, and settlement negotiations. <br>Ensure compliance with applicable laws, regulations, commercial governance standards, Incoterms (ICC Rules), sanctions requirements, and international trade practices. <br>Lead tendering processes, commercial evaluations, supplier/customer selection, bid analysis, and contract award recommendations in accordance with approved governance processes. <br>Develop and oversee commercial performance dashboards, KPIs, market intelligence reports, supply-demand analyses, and management reporting systems. <br>Assess commercial, operational, market, contractual, and business continuity risks and establish appropriate mitigation and contingency plans. <br>Act as the principal commercial interface between the Company and external stakeholders, while ensuring effective collaboration with Legal, Finance, Planning, Operations, Supply Chain, HSE, and Executive Management. <br>Provide commercial support and strategic advice to senior management on business development initiatives, investment opportunities, major projects, and complex commercial transactions. <br>Mentor, coach, and develop Commercial Team members, ensuring effective knowledge transfer, succession planning, capability development, and a high-performance culture. <br>Drive continuous improvement, digitalization, and optimization of commercial processes, systems, controls, and reporting tools. <br>Ensure all commercial activities are conducted in accordance with the Company's Mission, Vision, Values, HSE requirements, corporate governance framework, and ethical standards while supporting long-term business growth and profitability. <br>Develop and manage refinery product hedging policy with appointed banks and ensure OQ8 board mandate on hedging is executed. <br>Key interactions <br>Internal: (internal stakeholders) COO Office, Operations, Maintenance, Technical Services and HSSE Functional Management, Commercial Team, SCM, Finance, People, etc. <br>External: (External Stakeholders) Crude Oil and product traders, logistics companies, surveyors, agents, all commercial interfaces, government representatives, 3rd party contractors, etc. Notable Working Conditions. Office environment and Filed operations. Moderate to intensive computer screen use. Sporadic travel to operational areas where company operates</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Business (Marketing / Administration / Supply Chain), Engineering or related field. </li><li>MBA in Business, preferred.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>10 years of total experience of which over 5 years in Oil &amp; Gas industry </li><li>8 years of relevant experience in commercial, trading, logistics, market analysis, strategy, and business development </li><li>Previous work experience in GCC countries/companies </li><li>In depth knowledge of and hands-on experience with business operations in petrochemical/refinery projects, preferably in Oman and/or GCC </li><li>Experience of working for an International Joint Venture project </li><li>Excellent knowledge in Commercial &amp; Contracts aspects </li><li>Must have the potential to lead the future commercial activities of OQ8 with the capability to successfully complete actions in the project implementation and operational phases </li><li>Focus on maximizing economics/value </li><li>Good understanding of operational planning, reporting, scheduling of downstream sector activities (working with refinery planning, terminal operator, vessel/berth operations, government affairs, external service providers, among others) </li><li>Expertise in budgeting and cost control </li><li>Comprehensive knowledge about various pricing platforms (e.g. Platts, Argus, DME etc.) and market consultants (IHS, ICIS, Woodmac, Argus web portals) with ability to extract/synthesize/analyze data and information </li><li>Develop and maintain data models. </li><li>Strong Communication skill verbal and written </li><li>Commercially Driven with strong business acumen </li><li>Analytical / Quantitative / IT Skills </li><li>Negotiation skills and Commercial Acumen </li><li>Decision Making &amp; Judgement, critical thinking </li><li>Personal and Team Accountability </li><li>Accurate Reporting skills </li><li>Effective planning and organizing skills </li><li>Effective Communication skills </li><li>Problem Solving Skills </li><li>Results orientation strong drive and motivation </li><li>Planning and organizing, capable of working with little supervision </li><li>Exercising influences, developing solid working relationships </li><li>Work Prioritization even under changing business priorities </li><li>Customer and stakeholder focus. </li><li>Familiarization of SAP or Oracle </li><li>Computer knowledge in MS Office applications like MS Word, MS Excel, Power Point, MS-Visio etc. solutions. </li><li>Well-versed and hands-on experience with Incoterms (ICC Rules) in oil market &amp; trading </li><li>Stakeholder Management (internal / external); development &amp; implementation the commercial strategy for the OQ8 project </li><li>Tendering and contracts management </li><li>Negotiate &amp; develop new strategies for feed stock sourcing that favors OQ8 margins </li><li>Lead, coach, and develop the commercial team, including Senior Commercial Experts and Commercial Specialists. </li><li>Ensure commercial practices while complying with industry norms, int l, and local regulatory requirements </li><li>Ensure strong interface / networking / relationships with all the relevant stakeholders for a smooth and seamless OQ8 commercial activity </li><li>Identify, plan, present and develop revenue growth opportunities for the Company </li><li>Analysis of regional and global crude oil and refined product markets including fundamental analysis, pricing and logistics. </li><li>Knowledge in market intelligence, economic evaluations, and strategic recommendations to senior management.</li></ul><p></p></section>

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">The Electrician Helper is responsible for the inspection, maintenance and field repair of all electrical equipment on the rig, logistics equipment and camp in accordance with Nabors Rig Management System (RMS). <br> Nabors is a leading provider of advanced technology for the energy industry. With operations in about 20 countries, Nabors has established a global network of people, technology and equipment to deploy solutions that deliver safe, efficient and responsible hydrocarbon production. By leveraging its core competencies, particularly in drilling, engineering, automation, data science and manufacturing, Nabors aims to innovate the future of energy and enable the transition to a lower carbon world. 0-2 years of experience with equipment similar to that used on the rig being assigned to, with a minimum of 12 months experience with drive systems, if the rig is so equipped, is preferred. Experience with USCG regulations on the electrical systems and wiring requirements if the assigned rig is a MODU classed unit. Ability to wear respiratory protective devices. <br> To ensure that all operation of electrical equipment is carried out in a safe manner and in accordance with the manufacturers specifications To maintain all electrical equipment on the rig and camp in accordance with Nabors planned maintenance system and to manufacturers specifications To carry out unscheduled repairs to electrical equipment at the rig site and on the camp To liaise with the Rig Manager, Driller and Rig Mechanic to schedule major overhauls of rig equipment To ensure the availability of adequate spare parts for electrical equipment through the inventory system, both for routine maintenance and to cover unscheduled maintenance or replacements Personally responsible for own safety and conducting one s self to the standards of Nabors Policies and Procedures Carry out all duties in the safest possible manner and ensure that personal protective equipment (PPE) is used correctly Take personal responsibility for, and demonstrate leadership in HSE. Play a leading role in safety meetings and the safety program Supervise the activities of the Rig Welder and Motorman Enact the planned maintenance program for rig and camp electrical equipment and instrumentation Work with the Driller and other crew members to ensure that the rig is operated in accordance within the design parameters and in conformance with all aspects of Nabors RMS Conduct visual, and where possible functional, inspections of equipment both prior to use and at periodic intervals and in particular after rig moves and rig-up Take responsibility for planned maintenance, certification, record-keeping and reporting Maintain all required records, documentation and certification of electrical equipment on the rig and camp and produce accurate and timely reports on usage of such equipment Maintain and update all electrical drawings and wiring diagrams Ensure that lock-out and tag-out procedures are fully complied with at rig site and campsite Supervise the dismantling, packaging and preparation of electrical equipment for rig moves, including re-assembly at new locations Establish a culture of continuous improvement in operations and demonstrate results in this regard. Work with the other members of the rig crew to develop improved practices which will positively impact on rig performance Maintain, jointly with the Rig Mechanic, all rig instrumentation Manage, in conjunction with the Warehouseman, the inventory of spares and replacement parts for Electrical Equipment and initiate material requests and material transfers as required Maintain the cleanliness of the SCR house and integrity of the electrical control equipment therein Make recommendations for improved practices Prepare the rig and camp equipment for stacking out, when required, in accordance with the provisions of the RMS and contribute to preparation of the stack out report Make provisions for electrical supplies and instrumentation to meet third party service companies requirements at rig site and provide emergency repairs to their equipment where possible Provide on-the-job training for Electrical Helpers Maintain the validity of personal certification and training<br></div></section>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>