وصف الوظيفة
التقارير إلى: قائد فريق الوردیات التحویل OTTCO
القسم: قسم الصيانة والتشغيل
الموقع: الدقم ورأس قلب
غرض الوظيفة
يؤدي عمليات تحكم صفي آمنة ومنظمة وكفؤة للسيطرة على التدفقات للضبط في الاستقبال والتخزين والشحن (الضغط، التدفق، المعدل، القراءة، العدادات، فحص المنتج) في المواقع المعينة (مسقط / رأس قلب / الدقم)، ضمن نطاق مشرف التشغيل بالتبادل، كعامل فردي من خلال:
- التحكم والتنظيم لضغط المرافق والتدفق ومعدلها وتصحيح الشوائب.
- الإشراف والقراءة والصيانة للمعدات التي تتحكم في ضغط وتدفق المنشأة.
- مراقبة العدادات، فحص المنتج، استكشاف الأخطاء، حفظ السجلات.
- إعداد وثائق مكتوبة للمشرفين أو المفتشين السلامة لضمان مطابقة المنتجات للمواصفات المطلوبة والمساهمة في عمليات آمنة وروتينية.
سيتم تنفيذ الوظيفة وفقاً لمهمة OTTCO ورؤيتها وقيمها واستراتيجياتها، وكذلك السياسات والإرشادات والمعايير الدولية، مدعومة بمنصة تكنولوجيا معلومات، معايير الصحة والسلامة والبيئة، الحكومة العمانية وغيرها من الأساسات القانونية وأفضل الممارسات الدولية بما يتسق مع الأهداف الوطنية.
هيكل التقارير
عدد الموظفين المشرفين (تقارير مباشرة): 0
المسؤوليات الرئيسية
عام:
- أداء جميع أنشطة تشغيل CRO في محطة البتروكيماويات والهيدروكربونات.
- قبول النوبة من مشغل لوحة التحكّم السابقة مع سجل تفصيلي لضبط وتشغيلات خلال النوبة السابقة.
- ضمان استمرارية قضايا التشغيل المنقولة من النوبة السابقة واتخاذ الإجراءات اللازمة.
- التقاط جميع النقاط البارزة والقيود أثناء النوبة بتفصيل في سجل العمل للنوبة التالية.
- مراقبة أداء عملية الوحدة بشكل مستمر باستخدام نظام التحكم الموزع (DCS).
- تشخيص الحالات غير الطبيعية واتخاذ إجراء تصحيحي من لوحة التحكم.
- التأكد من أن المعدات تعمل ضمن المعايير المحددة والإبلاغ عن الانحرافات التشغيلية الجسيمة إلى قائد فريق التحول.
- مراجعة ومقارنة قراءات سجل خارجية بشكل منتظم مع قراءات أجهزة غرفة التحكم والتأكد من تطابقها.
- مراجعة نتائج تحليل عينات المختبر بالإشارة إلى تحديثات نظام إدارة معلومات المختبر وإجراء التعديلات اللازمة على أجهزة لوحة التحكم.
- التأكد من أن قائد فريق التحول مُطلع بالكامل على جميع الجوانب ذات الصلة والحصول على التوجيه عند الحاجة.
- التحكم في بدء تشغيل المحطة وإيقافها والطوارئ بتعديل السرعة ودرجة الحرارة والضغط وتدفقات كما يلزم.
- تسهيل الإغلاق وبدء التشغيل لأغراض الصيانة والتفتيش مع الالتزام بإجراءات التشغيل القياسية (SOP).
- تنفيذ إجراءات الطوارئ كما تفرضها الظروف وSOPs.
- المساهمة في سلامة بنية المنظمة من خلال التغذية الراجعة البناءة.
- المساهمة في تحسين العمليات والإجراءات داخل القسم بالتعاون مع قائد الفريق.
- الالتزام بإجراءات التشغيل القياسية والتعليمات المستلمة من قائد فريق التحول بالتعاون مع عامل الميدان.
- الحفاظ على سجلات وتقاريرWork اليومية
- تدوين الحوادث السلامة (قرب حدوثها، ملاحظات، حوادث).
- إدخال البيانات في التقارير الأسبوعية أو الشهرية إذا طُلب من قبل قسم المنطقة.
- الحفاظ على استمرارية تشغيل اللوحة وإغلاق جميع القضايا الحرجة المجدولة للنوبة المخصصة.
- التواصل وتصحيح مشاكل جودة العملية.
- المشاركة في نشاطات إدارة سلامة العمليات (PSM).
- التفاعل الفعّال مع جميع مستويات الموظفين والعملاء والبائعين.
- دعم أحداث تحويل الوحدة بما في ذلك تحديد/مبررات قائمة العمل، كتابة الإجراءات، مراجعة الإجراءات وفحص المعدات.
- استكشاف تشغيلي العمليات والتواصل والتصحيح لمشاكل جودة العملية.
- أداء واجبات أو مهام أخرى حسب التوجيهات.
- التعرف على سياسات QHSE وأهدافها وإجراءاتها وصيانة سجلاتها.
- الاحتفاظ بالوعي بالجوانب البيئية الهامة والمخاطر الصحية والسلامة المتعلقة بالجوانب الفعلية والمحتملة المرتبطة بمخاطرهم.
- الاحتفاظ بالوعي بإجراءات الاستعداد والرد في حالات الطوارئ.
- الاحتفاظ بالوعي بتبعات عدم المطابقة مع متطلبات النظام الإداري المتكامل، بما في ذلك عدم الوفاء بالتزامات الامتثال للمؤسسة.
المؤهلات والخبرة
أدنى مؤهل: دبلوم في البتروكيماويات أو النفط/الغاز أو ما يعادله.
معرفة ممتازة بالإنجليزية القراءة والكتابة والمحادثة (مطلوب). العربية - أصيلة (مرغوب).
الخبرة والخلفية:
- 5-7 سنوات من الخبرة في التكرير الهيدروكربوني/البتروكيماويات، هندسة العمليات أو صناعة ذات صلة.
- خبرة ذات صلة في صناعة النفط والغاز / المصافي / البتروكيماويات مع خبرة في وحدات اليوتي/خزانات/الجَانْتْري.
- معرفة بمعدات قطاع الوقود.
- معرفة بمرافق المصافي وإجراءاتها.
المهارات:
- معرفة وظيفية جيدة بـ DCS.
- معرفة جيدة بالعمليات المعنية ومتطلبات الصحة والسلامة والبيئة وإجراءات وممارسات عمليات النفط/الغاز.
- القدرة على العمل كعضو فريق.
- دافع ذاتي وموثوق، يظهر مبادرة قوية.
- القدرة على التعامل مع التغيّر والمرونة كما يطلب.
التفاعلات الأساسية
داخلي: مدراء الأقسام، موظفو تحول التشغيل، SCM، TSD، الصيانة، HSE، الإطفاء
خارجي: أوكيو، SIPC، شركات المسح، رُوب والدفاع المدني، شركات الغاز، مقاولون وموردون آخرون حسب الحاجة.
ظروف العمل الملحوظة
العمليات الميدانية والبيئة المكتبية، استخدام شاشات الكمبيوتر بمعدل متوسط إلى عالي.
Position description
Reports to: Shift Team Lead OTTCO
Department: Maintenance & Operation Department
Location: Duqm & Ras Markaz
Job purpose
Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:
- Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.
- Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.
- Watching gauges, inspecting product, troubleshooting, record keeping.
- Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.
The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.
Reporting structure
Number of staff supervised (direct reports): 0
Key responsibilities
General:
- Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.
- Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.
- Ensure continuity of operational issues handed over by the previous shift and take necessary action.
- Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.
- Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).
- Diagnose abnormal situations and take corrective action from the control panel.
- Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.
- Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.
- Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.
- Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.
- Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.
- Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).
- Implement emergency procedures as dictated by the circumstances and SOPs.
- Contribute to the integrity of the organisation structure through constructive feedback.
- Contribute to improving processes and procedures within the department in conjunction with Team Leader.
- Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.
- Maintain log sheets and logbooks reporting the highlights of daily shift work.
- Record safety incidents (near misses, observations, incidents).
- Provide input into the weekly or monthly reports if required by the Area Department.
- Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.
- Communicate and correct process quality problems.
- Participate in Process Safety Management (PSM) activities.
- Effectively interact with all levels of employees, clients and vendors.
- Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.
- Troubleshoot process operations, communicate and correct process quality problems.
- Perform other related duties or assignments as directed.
- Familiarize with QHSE policies, objectives, procedures and its record maintenance.
- Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.
- Maintain awareness of emergency preparedness and response measures.
- Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.
Qualifications & experience
Minimum qualifications: Diploma in Petrochemical or Oil / Gas or equivalent.
Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).
Experience and background:
- 5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.
- Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.
- Knowledge of fuel sector equipment.
- Knowledge of the refinery's offsite facilities and procedures.
Skills:
- Good functional knowledge of DCS.
- Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.
- Ability to perform as a team player.
- Self-motivated and dependable, demonstrating strong initiative.
- Ability to deal with change and demonstrate flexibility as required.
Key interactions
Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire
External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.
Notable working conditions
Field operations and office environment, moderate to intensive computer screen use.