وظائف مهندس ميكانيكا معدات ثقيلة - مسقط سلطنة عمان

<p>Electrical Activities:</p><ul><li><p>Installation of Electrical systems including power, lighting, earthing & Lightning protection.</p></li><li><p>Cable tray, conduit , cabling & termination works.</p></li><li><p>Installation of DBs, MDBs, SMDBs & associated equipment.</p></li><li><p>Fire alarm, emergency lighting & other ELV system installation.</p></li><li><p>Testing, commissioning & handover of electrical systems.</p></li><li><p>Ensure compliance with drawings, specifications & safety standards.</p></li><li><p>Coordinate with other trades and maintain site progress.</p></li></ul><p>Plumbing Activities:</p><ul><li><p>Installation of cold & hot water supply systems.</p></li><li><p>Installation of sanitary drainage, waste & vent systems</p></li><li><p>Installation of soil, waste, rainwater (SWR) & storm water systems</p></li><li><p>Installation of fixtures, fittings & plumbing accessories.</p></li><li><p>Testing, flushing & commissioning of plumbing systems.</p></li><li><p>Ensure compliance with drawings, specifications & standards</p></li><li><p>Coordinate with other trades and maintain site progress</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering, ensuring a strong foundational knowledge of MEP systems.</p></li><li><p>Minimum of 5 years of experience in MEP engineering, with a proven track record in commercial or industrial projects.</p></li><li><p>Professional Engineering (PE) license or similar certification, demonstrating recognized expertise in the field.</p></li><li><p>Experience with Building Information Modeling (BIM) software, such as Revit, to facilitate advanced design processes.</p></li></ul>

<ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction & commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints & critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil & gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal & communication skills and an extrovert.</p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are looking for an experienced Precommissioning & commissioning system engineer to manage system based execution during the precommissioning and commissioning phases of a large LNG facility. The role focuses on system ownership from mechanical completion through precommissioning, commissioning, startup support, and handover to operations.</p> <p>This position is site based and suited to engineers with proven EPC commissioning experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system engineer for assigned process and/or utility systems</li> <li>Define system boundaries, subsystems, and turnover packages</li> <li>Plan and execute precommissioning activities, including:<br> flushing, blowing, drying, leak testing, pressure testing<br> instrument loop checks and functional testing<br> electrical continuity, IR testing, and energisation readiness</li> <li>Verify mechanical completion (MC) and manage punch list clearance</li> <li>Execute commissioning activities in line with approved procedures</li> <li>Support startup, live testing, and initial operation of systems</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC teams</li> <li>Prepare and review commissioning procedures, test records, and system dossiers</li> <li>Report system progress, constraints, and risks to the commissioning manager</li> <li>Ensure all activities comply with HSE requirements, permits, and SIMOPS controls</li> </ul> <h4>Mandatory requirements (strict)</h4> <h4>Education</h4> <p>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</p> <h4>Experience</h4> <ul> <li>Minimum 8 years of oil & gas or LNG project experience</li> <li>Hands on precommissioning and commissioning experience on EPC projects</li> <li>Proven system based commissioning role from construction to startup</li> <li>Site experience on large scale LNG or gas processing facilities</li> <li>Candidates without direct site commissioning experience will not be considered</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong understanding of commissioning workflows and system handover</li> <li>Ability to read and interpret:<br> P&IDs, cause & effect diagrams<br> electrical single line diagrams<br> instrument loop diagrams</li> <li>Experience with commissioning databases and system dossiers</li> </ul> <h4>Professional skills</h4> <ul> <li>Strong coordination and interface management skills</li> <li>Practical, hands on problem solver</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning experience</li> <li>LNG precommissioning and commissioning phase exposure</li> <li>Middle East project experience (preferred)</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are looking for an experienced Precommissioning & commissioning system engineer to manage system based execution during the precommissioning and commissioning phases of a large LNG facility. The role focuses on system ownership from mechanical completion through precommissioning, commissioning, startup support, and handover to operations.</p> <p>This position is site based and suited to engineers with proven EPC commissioning experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system engineer for assigned process and/or utility systems</li> <li>Define system boundaries, subsystems, and turnover packages</li> <li>Plan and execute precommissioning activities, including:<br> flushing, blowing, drying, leak testing, pressure testing<br> instrument loop checks and functional testing<br> electrical continuity, IR testing, and energisation readiness</li> <li>Verify mechanical completion (MC) and manage punch list clearance</li> <li>Execute commissioning activities in line with approved procedures</li> <li>Support startup, live testing, and initial operation of systems</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC teams</li> <li>Prepare and review commissioning procedures, test records, and system dossiers</li> <li>Report system progress, constraints, and risks to the commissioning manager</li> <li>Ensure all activities comply with HSE requirements, permits, and SIMOPS controls</li> </ul> <h4>Mandatory requirements (strict)</h4> <h4>Education</h4> <p>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</p> <h4>Experience</h4> <ul> <li>Minimum 8 years of oil & gas or LNG project experience</li> <li>Hands on precommissioning and commissioning experience on EPC projects</li> <li>Proven system based commissioning role from construction to startup</li> <li>Site experience on large scale LNG or gas processing facilities</li> <li>Candidates without direct site commissioning experience will not be considered</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong understanding of commissioning workflows and system handover</li> <li>Ability to read and interpret:<br> P&IDs, cause & effect diagrams<br> electrical single line diagrams<br> instrument loop diagrams</li> <li>Experience with commissioning databases and system dossiers</li> </ul> <h4>Professional skills</h4> <ul> <li>Strong coordination and interface management skills</li> <li>Practical, hands on problem solver</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning experience</li> <li>LNG precommissioning and commissioning phase exposure</li> <li>Middle East project experience (preferred)</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p>The Ideal Candidate must have mixed experience in both proposal and estimation and MUST have experience in CANDY software. Strong knowledge of estimation software, pricing methodologies, and market rate analysis. Familiarity with Omani construction market, cost structures, and local suppliers / subcontractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors Degree in Civil, Mechanical or Electrical Engineering. Minimum 8 12 years of experience The Ideal Candidate must have mixed experience in both proposal and estimation and MUST have experience in CANDY software.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Chemical Engineer</p><p>Reports To: Engineering Manager / Plant Manager</p><p>Job Details</p><p>Number of Vacancies: 1 Position</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Chemical Engineer is responsible for designing, developing, monitoring, and optimizing chemical processes to ensure safe, efficient, and cost-effective production operations. The role focuses on improving process performance, maintaining product quality, and ensuring compliance with safety and environmental standards.</p><p>Key Responsibilities</p><ul><li>Design, evaluate, and optimize chemical processes and production systems.</li><li>Monitor plant operations and analyze process performance to identify improvement opportunities.</li><li>Conduct process calculations, simulations, and technical evaluations.</li><li>Support troubleshooting activities and implement corrective actions to resolve operational issues.</li><li>Ensure compliance with health, safety, environmental, and quality standards.</li><li>Prepare process documentation, technical reports, operating procedures, and engineering calculations.</li><li>Participate in plant commissioning, startup, shutdown, and process modification activities.</li><li>Coordinate with operations, maintenance, laboratory, and project teams to achieve production objectives.</li><li>Evaluate raw materials, equipment performance, and production efficiency.</li><li>Support process safety management initiatives and risk assessments.</li><li>Assist in implementing cost reduction, energy efficiency, and continuous improvement programs.</li><li>Provide technical support and training to operational personnel.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Chemical Engineering or a related engineering discipline.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in chemical engineering or industrial processes are an advantage.</li></ul><p>Technical Skills</p><ul><li>Basic knowledge of chemical engineering principles, process design, and optimization.</li><li>Familiarity with process calculations, mass and energy balances, and engineering analysis.</li><li>Understanding of process simulation tools such as Aspen HYSYS, Aspen Plus, or similar (advantage).</li><li>Awareness of process safety management and risk assessment concepts.</li><li>Basic knowledge of industrial equipment, instrumentation, and control systems.</li><li>Ability to read and interpret PFDs, P&amp;IDs, engineering drawings, and technical specifications.</li><li>Proficiency in Microsoft Office applications.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical expertise.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to safety and quality.</li></ul><p>Working Conditions</p><p>Office and plant-based work environments. May require site visits, plant inspections, troubleshooting activities, and support during shutdowns or emergency situations.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide expert technical engineering leadership and operational support for OQEP's offshore facility facilities, including piping systems in processing plants and production platforms, under the direction of the Manager Operation &amp; Maintenance Support, ensuring safe, reliable, available and efficient operations across Upstream Surface Operations. The role delivers robust technical judgement, innovative engineering solutions and operability, availability and reliability assessments for off shore facility, evaluating modification and innovation proposals against project requirements, engineering standards and operational integrity. It provides hands-on operational support, technical troubleshooting and readiness assurance for assigned assets, while acting as the operations interface with projects, procurement, supply and other stakeholders. The role also mentors and develops production and junior engineers into self-sufficient performers, embeds common engineering principles across teams, and drives operational excellence, safety and reliability across OQEP's surface operations facilities.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><p>Provide robust technical engineering expertise and innovative solutions for the execution and operation of offshore facility (piping systems in processing plants and production platforms), ensuring teams apply common engineering principles and concepts.</p><p>Lead and deliver operability, availability and reliability assessments on systems related to offshore facility, providing robust technical judgement on modification and innovation proposals in line with project requirements, engineering standards, safety and reliability.</p><p>Handle a large scope of concurrent engineering activities and projects, prioritizing and delivering high-quality technical outputs across multiple assets simultaneously.</p><p>Analyze complex technical, operational and reliability issues on offshore facility and recommend solutions that significantly improve safety, availability and performance.</p><p>Provide operational support for offshore facility (piping systems in processing plants and production platforms) at Upstream Surface Operations.</p><p>Deliver assigned operational duties and tasks for the assets, including technical support, troubleshooting, backup and other services to operate applicable hardware, systems software and application software.</p><p>Modify and improve engineering processes, standards, operating procedures and technical documentation to enhance reliability, integrity and operational efficiency.</p><p>Measure and assure progress towards the state of Operational Readiness to Operate (ORA), ensuring readiness for safe and efficient operations at the site.</p><p>Act as the Operations interface to manage procurement and supply issues, ensuring timely availability of technical materials, spares and services.</p><p>Act as the ORA interface to engage and coordinate with different stakeholders across the function on readiness, technical and operational matters.</p><p>Provide technical leadership, guidance and review to junior engineers, trainees and teams on engineering principles, standards and operational practices.</p><p>Mentor and coach production engineers and staff to build capability and develop them into self-sufficient, high-performing engineers.</p><p>Convince and influence internal stakeholders, projects and vendors to adopt sound engineering solutions, operability improvements and reliability-centred practices.</p><p>Support incident investigation, root cause analysis and corrective actions for offshore facility reliability and integrity issues.</p><p>Support planning, budgeting, forecasting and reporting for operations support engineering activities and embed KPIs in day-to-day work.</p><p>Perform other similar duties as assigned by the Manager Operation &amp; Maintenance Support.</p><p><strong>Key interactions</strong></p><p>Internal: Surface Operations, Operation &amp; Maintenance Support, Well Delivery, Projects Delivery, Technical Services, HSSE, Contract &amp; Procurement, and all relevant operational and support functions.</p><p>External: EPC and engineering contractors, equipment and piping vendors, OEMs, technical service providers, and specialist engineering consultants.</p><p><strong>Notable Working Conditions</strong>. Combination of office and field/plant environment; regular presence at processing plants and production platforms; intensive computer screen use; exposure to operational site conditions; occasional after-hours support for operational and readiness matters.</p><p><strong>Education Requirements</strong></p><p>Required: Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline. Relevant post-degree qualification or professional engineering certification is preferred. Master's degree is a plus.</p><p><strong>Language</strong></p><p>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</p><p>Proven track record of providing technical engineering leadership and operational support for offshore facility.</p><p>Strong experience in:</p><p>offshore facility and piping systems (processing plants and production platforms).</p><p>Operability, availability and reliability engineering.</p><p>Operational Readiness Assurance (ORA) and readiness-to-operate assessments.</p><p>Technical troubleshooting and operational support.</p><p>Modification and innovation proposal review against engineering standards.</p><p>Incident investigation and root cause analysis.</p><p>Engineering standards, codes and operating procedures.</p><p>Procurement and supply interface for technical materials and services.</p><p>Mentoring and developing junior engineers and Omani national talent.</p><p><br></p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline.</li><li>Relevant post-degree qualification or professional engineering certification is preferred.</li><li>Master's degree is a plus.</li><li>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</li><li>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</li><li>Proven track record of providing technical engineering leadership and operational support for offshore facility.</li><li>Strong experience in: offshore facility and piping systems (processing plants and production platforms), Operability, availability and reliability engineering, Operational Readiness Assurance (ORA) and readiness-to-operate assessments, Technical troubleshooting and operational support, Modification and innovation proposal review against engineering standards, Incident investigation and root cause analysis, Engineering standards, codes and operating procedures, Procurement and supply interface for technical materials and services, Mentoring and developing junior engineers and Omani national talent.</li><li><strong>Behavioural Competencies:</strong> Strong technical and analytical problem-solving skills. Sound engineering judgement and decision-making. Maintaining effective, accurate and transparent communication with all stakeholders. Attention to detail and safety-first mindset. Planning and prioritization across multiple activities. Negotiation and influencing. Ethics, integrity and compliance. Engages and inspires colleagues to collaborate and share knowledge. Pursues innovation and continuous improvement. Acts as an agent for change, constructively challenging the status quo. Mentoring and coaching capability. Composure under operational and readiness pressure.</li><li><strong>Technical Competencies:</strong> Offshore facility and piping systems engineering (processing plants and production platforms). Operability, availability and reliability engineering. Operational Readiness Assurance (ORA) and readiness-to-operate. Technical troubleshooting and operational support. Modification/innovation proposal review and technical judgement. Engineering standards, codes and operating procedures. Incident investigation and root cause analysis (RCA). Process safety and asset integrity awareness. Procurement and supply interface for technical materials. Hardware, systems software and application software for operations. Excellent business and technical report writing skills. Very good knowledge of PC software and engineering tools.</li></ul><p></p></section>

<ul><li><p>Generate new business opportunities and achieve monthly sales targets.</p></li><li><p>Promote and sell HVAC Annual Maintenance Contracts (AMC).</p></li><li><p>Identify and secure new clients across commercial, residential and industrial sectors.</p></li><li><p>Conduct site visits to assess customer requirements.</p></li><li><p>Prepare technical and commercial quotations, primarily for AMC contracts and small HVAC projects.</p></li><li><p>Follow up on quotations and negotiate with clients to successfully close sales.</p></li><li><p>Build and maintain long-term relationships with customers.</p></li><li><p>Coordinate with the operations team to ensure smooth execution of awarded jobs.</p></li><li><p>Maintain records of leads, quotations, sales activities and customer interactions.</p></li><li><p>Identify new market opportunities and contribute to business growth</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree or Diploma in Mechanical Engineering or a related field.</p></li><li><p>Minimum 2–5 years of HVAC sales experience, preferably in Oman or the GCC.</p></li><li><p>Strong knowledge of HVAC systems, maintenance services and AMC contracts.</p></li><li><p>Experience preparing technical and commercial quotations.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Self-motivated with the ability to work independently in a startup environment.</p></li><li><p>Valid Omani driving license is preferred.</p></li><li><p>Proficiency in Microsoft 365</p></li></ul><br><p><strong>Skills</strong></p><ul><li><p>HVAC Sales & Business Development</p></li><li><p>Quotation Preparation</p></li><li><p>Customer Relationship Management</p></li><li><p>Negotiation & Closing</p></li><li><p>Technical Understanding of HVAC Systems</p></li><li><p>Time Management</p></li><li><p>Problem Solving</p></li></ul><br><p><strong>Compensation & Benefits</strong></p><ul><li><p>Salary: OMR 700 – 1,000 per month</p></li><li><p>Performance-based incentives/commission.</p></li><li><p>Opportunity to grow with a fast-growing startup.</p></li><li><p>Professional development and career progression.</p></li><li><p>Supportive and dynamic work environment</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> WE’RE HIRING – BIOMEDICAL ENGINEER! </p><p><br></p><p> Are you a Biomedical Engineer with strong hands-on experience?</p><p> Laser experience? That’s a BIG PLUS!</p><p><br></p><p>We’re looking for a skilled and experienced professional to join our team URGENTLY.</p><p><br></p><p>✨ Position: Biomedical Engineer</p><p> Key Requirement: Experience with Medical Lasers &amp; Equipment</p><p> Salary: OMR 300–450 (depending on experience)</p><p>⚡ Joining: Immediate</p><p><br></p><p>If you’re technically strong, hands-on, and ready for your next opportunity — we want to hear from you!</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Experience with Medical Lasers &amp; Equipment</p></div>

<p>We have openings for our prestigious client in Oman; they have openings for " MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!! </p><p><strong>Desired Candidate Profile</strong></p><ul><li><b>1) MEP Engineer.</b></li><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li><li><b>2) Plumbing Supervisor.</b></li><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li><li><b>3) HVAC Supervisor.</b></li><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li><li><b>4) Electrical Supervisor.</b></li><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul>

<p>We are looking for an experienced Senior Engineer – HVAC Tendering & Estimation to support the preparation of competitive tenders and cost estimates for commercial, industrial, healthcare, and residential projects. The successful candidate will be responsible for reviewing tender documents, preparing accurate cost estimates, coordinating with MEP disciplines, and ensuring timely submission of technical and commercial proposals.</p><br><ul><li><p>Review tender documents, BOQs, drawings, specifications, and contract conditions.</p></li><li><p>Prepare quantity take-offs and detailed HVAC cost estimates.</p></li><li><p>Prepare technical and commercial proposals for tender submissions.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Coordinate with engineering, procurement, and other MEP disciplines during the tendering process.</p></li><li><p>Analyze project risks and identify value engineering opportunities.</p></li><li><p>Participate in pre-bid meetings, technical clarifications, and site visits.</p></li><li><p>Prepare bid analysis and cost comparison reports for management.</p></li><li><p>Maintain cost databases, supplier pricing, and market information.</p></li><li><p>Support project handover to the execution team after order finalization.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering.</p></li><li><p>10–12 years of experience in HVAC tendering and estimation for MEP projects.</p></li><li><p>Middle East/GCC experience is preferred.</p></li><li><p>Strong knowledge of HVAC systems, quantity surveying, BOQs, and cost estimation.</p></li><li><p>Familiarity with FIDIC contracts and GCC construction practices.</p></li><li><p>Proficiency in Microsoft Excel, MS Office, and AutoCAD. Knowledge of Revit/BIM is an added advantage.</p></li><li><p>Strong analytical, commercial, negotiation, and communication skills.</p></li><li><p>Ability to manage multiple tenders and meet strict submission deadlines.</p></li></ul><p><strong>Preferred Project Experience:</strong></p><ul><li><p>Commercial Buildings</p></li><li><p>Industrial Facilities</p></li><li><p>Hospitals</p></li><li><p>Residential Developments</p></li><li><p>Large-Scale HVAC/MEP Projects</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are looking for a motivated and detail-oriented professional with a background in fire fighting systems engineering to join our team as a Project Engineer – Fire Fighting System. The ideal candidate will combine technical expertise with strong selling skills and the ability to confidently communicate complex solutions. You will play a key role in delivering high-quality fire protection projects while collaborating across departments and ensuring client satisfaction. If you are passionate about fire safety engineering and enjoy developing solutions in a dynamic environment, we invite you to apply. </p><br><br>Key Responsibilities – Project Engineering and Fire Fighting System Management<ul> <li>Manage the planning, execution, and delivery of fire fighting system projects from inception through to completion, ensuring adherence to relevant codes and standards.</li> <li>Liaise with clients, consultants, contractors, and internal stakeholders to establish technical requirements, address queries, and ensure alignment throughout project phases.</li> <li>Prepare and review system designs, material submittals, method statements, and as-built documentation, ensuring technical accuracy and compliance.</li> <li>Attend site meetings, carry out inspections and technical assessments, and provide clear direction to installation teams.</li> <li>Identify and resolve project challenges through effective problem solving and proactive decision making.</li> <li>Assist the sales team by providing technical support, preparing accurate project quotations, and contributing to tender submissions as required.</li> <li>Track project progress, control costs, and ensure delivery against timelines and client expectations.</li> <li>Promote a strong safety culture and adherence to best practices at all project locations.</li> </ul>Required Skills – Selling Skills, Technical Knowledge, and Communication for Fire Fighting Systems<ul> <li>Proven selling skills in a project or engineering context, with the ability to present fire protection solutions and influence stakeholders.</li> <li>Comprehensive technical knowledge of fire fighting systems, including design, installation, testing, and compliance with international and local codes (NFPA, Civil Defence, or equivalent).</li> <li>Excellent communication skills, both verbal and written, with the capability to explain complex concepts to clients and colleagues.</li> <li>Competence in reading schematics, engineering drawings, and producing technical documentation.</li> <li>Experience using relevant engineering software and standard office applications.</li> </ul>Qualifications &amp; Experience – Project Engineer for Fire Fighting Systems<ul> <li>Bachelor’s degree in Mechanical Engineering, Fire Protection Engineering, or a closely related discipline.</li> <li>Minimum 3 years' experience in project engineering or technical roles within the fire fighting, MEP, or building services industry.</li> <li>Direct experience managing installation or commissioning of fire suppression systems, sprinklers, pumps, hydrants, and associated equipment is highly desirable.</li> <li>Familiarity with local regulatory frameworks and fire safety standards is a strong advantage.</li> </ul>What We Offer – Growth Opportunities and Supportive Team Culture<ul> <li>Structured opportunities for career development and technical upskilling in fire safety engineering.</li> <li>Comprehensive induction and continuous training on state-of-the-art fire protection technologies.</li> <li>Inclusive, gender-neutral, and collaborative workplace committed to employee success and innovation.</li> <li>Involvement in prestigious and diverse fire protection engineering projects.</li> </ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Quality Control (QC) Engineer – Construction Excellence Specialist<br></strong><br> Are you a detail-driven engineer passionate about delivering exceptional quality in large-scale construction projects? Join a dynamic team where your expertise in quality control systems will directly impact the successful execution and handover of complex infrastructure. As a QC Engineer, you will be at the forefront of maintaining rigorous construction quality management standards, collaborating closely with site teams, subcontractors, and project leaders to ensure every deliverable meets contractual and regulatory requirements. Your role is pivotal in driving quality processes, identifying issues early, and championing continuous improvement that safeguards the integrity and safety of our projects.<br> Required Skills<ul><li>Strong knowledge and practical experience in implementing construction Quality Control (QC) management systems.</li><li>Proven ability to assist in planning, developing, and executing quality programs aligned with contract and project quality plans.</li><li>Experience reviewing and approving product/material requisitions and subcontractor quality documentation, including Quality Management Systems, quality plans, and Inspection Test Plans (ITPs).</li><li>Skilled in conducting quality inductions, monitoring inspections, and assessing contractor compliance with QC procedures.</li><li>Proficiency in data management relating to QC records, non-conformance reports (NCRs), and turnover documentation.</li><li>Excellent communication skills to promote quality awareness and deliver targeted training.</li><li>Proficient in Microsoft Office Suite.</li></ul>Nice to Have Skills<ul><li>Familiarity with international standards such as EN standards, ASME code, EN1090 (structural steel), and the Pressure Equipment Directive (PED) for piping.</li><li>Quality Auditor certification from a recognized industry body.</li><li>Experience with construction completion and turnover management processes.</li><li>Understanding of Romanian regulatory requirements (ISCIR, INSEMEX, ISU, AFER, ANRE, RENAR, ISC).</li></ul>Preferred Education and Experience<ul><li>Bachelor’s degree in Engineering or a closely related discipline.</li><li>Minimum of 5 years of hands-on experience working in quality roles within EPC (Engineering, Procurement, and Construction) contract environments.</li><li>Demonstrated background in welding engineering, supported by relevant training or internationally recognized courses.</li></ul>Other Requirements<ul><li>Ability to work collaboratively with multidisciplinary teams and subcontractors on site.</li><li>Proven organizational skills for maintaining robust QC documentation and reporting.</li><li>Willingness to engage in local management reviews and continuous improvement initiatives.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p>job description:&nbsp;</p><br><p>The role requires an individual with strong knowledge and hands-on experience in: &nbsp;• " Electrical engineering fundamentals and design principles&nbsp;• " Project scope development and execution strategies&nbsp;• " Identification and mitigation of engineering concerns&nbsp;• " Coordination of multidisciplinary project activities The engineer must be&nbsp;capable of independently handling technical responsibilities and contributing&nbsp;effectively from the outset, minimizing the learning curve. &nbsp;• Manage all electrical engineering activities within OQEP.&nbsp;• " Review and approve all EPC Consultants or consultants’ electrical design.&nbsp;• " Prepare, check and approve all electrical engineering deliverables.&nbsp;• " Assuring that work and project promises are successfully delivered and&nbsp;appropriate reviews have been conducted. &nbsp;• " Involvement in Feasibility Studies.• " Plan &amp; Propose implementation of new technology.&nbsp;• " Attending equipment tests/design reviews with vendors inside/outside the&nbsp;country. &nbsp;• " Manage staff and 3rd party activities&nbsp;• " Development of local young engineers and providing development programs.&nbsp;• " Participating in Developing Tender Specifications.&nbsp;• " Participating in Tender Clarification and Evaluation.&nbsp;• " Participating, closing action items and approving reports from Electrical&nbsp;reviews &nbsp;</p><br> *minimum 8 years of experience in Oil&amp; Gas&nbsp;<br>*Bachelor degree in Electrical or any related certificate &nbsp;<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p>job description:&nbsp;</p><br><p>The role requires an individual with strong knowledge and hands-on experience in: &nbsp;• " Electrical engineering fundamentals and design principles&nbsp;• " Project scope development and execution strategies&nbsp;• " Identification and mitigation of engineering concerns&nbsp;• " Coordination of multidisciplinary project activities The engineer must be&nbsp;capable of independently handling technical responsibilities and contributing&nbsp;effectively from the outset, minimizing the learning curve. &nbsp;• Manage all electrical engineering activities within OQEP.&nbsp;• " Review and approve all EPC Consultants or consultants’ electrical design.&nbsp;• " Prepare, check and approve all electrical engineering deliverables.&nbsp;• " Assuring that work and project promises are successfully delivered and&nbsp;appropriate reviews have been conducted. &nbsp;• " Involvement in Feasibility Studies.• " Plan &amp; Propose implementation of new technology.&nbsp;• " Attending equipment tests/design reviews with vendors inside/outside the&nbsp;country. &nbsp;• " Manage staff and 3rd party activities&nbsp;• " Development of local young engineers and providing development programs.&nbsp;• " Participating in Developing Tender Specifications.&nbsp;• " Participating in Tender Clarification and Evaluation.&nbsp;• " Participating, closing action items and approving reports from Electrical&nbsp;reviews &nbsp;</p><br> *minimum 8 years of experience in Oil&amp; Gas&nbsp;<br>*Bachelor degree in Electrical or any related certificate &nbsp;<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<p>We are seeking an experienced and highly motivated Senior Tendering Engineer to join our team in Oman. The ideal candidate will have a minimum of 10 years of experience in tendering and proposal management within the energy sector, including Oil &amp; Gas, Power Generation, Transmission &amp; Distribution, Renewable Energy, or EPC projects. The candidate will be responsible for managing the complete tendering process, ensuring competitive, compliant, and commercially sound proposals that support the company's business growth.</p><p>Key Responsibilities</p><ul><li>Lead the end-to-end tendering and bidding process from receipt of inquiry to final submission.</li><li>Review tender documents, technical specifications, commercial requirements, and contractual terms.</li><li>Coordinate with engineering, procurement, estimation, finance, legal, and project teams to prepare comprehensive technical and commercial proposals.</li><li>Develop accurate cost estimates, pricing strategies, and bid documentation.</li><li>Prepare bid clarifications and respond to client queries during the tender evaluation process.</li><li>Conduct risk assessments and identify commercial, technical, and contractual risks associated with bids.</li><li>Negotiate with suppliers and subcontractors to obtain competitive quotations.</li><li>Ensure all tender submissions comply with client requirements, company standards, and applicable regulations.</li><li>Maintain bid schedules and ensure timely submission of proposals.</li><li>Support management during contract negotiations and project handover after award.</li><li>Monitor market trends, competitor activities, and upcoming opportunities within the energy sector.</li><li>Maintain an organized repository of tender documentation and proposal templates.</li><li>Contribute to continuous improvement of tendering processes and best practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, Instrumentation, or equivalent). Additional qualifications in Project Management or Commercial Management are an advantage.</p><h2>Experience</h2><p>Minimum 10 years of proven experience in tendering, bid management, or proposal engineering within the Energy sector . Experience in EPC projects related to Oil &amp; Gas, Power, Utilities, Renewable Energy, or Industrial Infrastructure. Previous experience working in GCC countries, particularly Oman, is preferred.</p><h2>Required Skills</h2><ul><li>Strong knowledge of tendering procedures and contract documentation.</li><li>Excellent understanding of commercial and contractual terms (FIDIC knowledge is an advantage).</li><li>Proficiency in cost estimation, pricing, and bid preparation.</li><li>Strong analytical and problem-solving abilities.</li><li>Excellent negotiation and communication skills.</li><li>Ability to manage multiple tenders simultaneously under tight deadlines.</li><li>Strong organizational and leadership skills.</li><li>Proficiency in Microsoft Office Suite, especially Excel and Word.</li><li>Experience with ERP systems (SAP, Oracle, or similar) and estimation software is preferred.</li><li>Excellent written and spoken English. Arabic language skills are an added advantage.</li></ul><h2>Key Competencies</h2><ul><li>Strategic thinking</li><li>Commercial awareness</li><li>Attention to detail</li><li>Decision-making</li><li>Leadership and team collaboration</li><li>Time management</li><li>Client-focused approach</li><li>Ability to work under pressure</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer – Solar PV / Electrical Power</b> in <b>Oman</b>. Our client, New Alfa International, is seeking skilled and motivated electrical engineering professionals with strong experience in solar PV, electrical construction, EPC projects, and testing &amp; commissioning. Candidates with relevant GCC project exposure are preferred. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Execute electrical construction activities for utility-scale and large rooftop solar PV projects.<br></li><li>Supervise installation and integration of LV and MV electrical networks in accordance with approved drawings and project specifications.<br></li><li>Review Single Line Diagrams (SLDs), electrical layouts, cable schedules, and related technical documentation.<br></li><li>Coordinate installation, testing, and commissioning of solar inverters and associated electrical equipment.<br></li><li>Conduct electrical inspections, functional testing, troubleshooting, and pre-commissioning checks.<br></li><li>Ensure site electrical works comply with project specifications, quality requirements, and applicable safety standards.<br></li><li>Coordinate with civil, mechanical, commissioning, and project teams to achieve construction milestones.<br></li><li>Prepare technical reports, testing records, punch lists, and commissioning documentation.<br></li></ul>Required Skills<br><ul><li><b>Solar PV Engineering:</b> Strong practical knowledge of utility-scale or large rooftop solar PV electrical systems.<br></li><li><b>LV/MV Networks:</b> Experience with installation, testing, and commissioning of low- and medium-voltage electrical systems.<br></li><li><b>Inverters:</b> Hands-on understanding of solar inverter installation, configuration, testing, and troubleshooting.<br></li><li><b>SLD Review:</b> Ability to interpret and review Single Line Diagrams and related electrical engineering drawings.<br></li><li><b>Testing &amp; Commissioning:</b> Practical experience carrying out electrical testing, pre-commissioning, and commissioning activities.<br></li></ul>Preferred Skills<br><ul><li>GCC project experience.<br></li><li>Experience working in EPC construction environments.<br></li><li>Exposure to utility-scale solar power plants.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>5–8 years of experience in electrical construction</b>, including a <b>minimum of 3 years in solar PV projects</b> involving utility-scale installations or large rooftop systems. Experience should include LV/MV networks, inverters, SLD review, testing, and commissioning. GCC experience is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.Sc. in Electrical Engineering<br></li><li><b>Preferred:</b> Not specified<br></li><li><b>Additional Certifications:</b> Not specified<br></li></ul>Contact No-9786888866<br><br><br> </div>