وظائف مهندس صناعات غذائية

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Chemical Engineer</p><p>Reports To: Engineering Manager / Plant Manager</p><p>Job Details</p><p>Number of Vacancies: 1 Position</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Chemical Engineer is responsible for designing, developing, monitoring, and optimizing chemical processes to ensure safe, efficient, and cost-effective production operations. The role focuses on improving process performance, maintaining product quality, and ensuring compliance with safety and environmental standards.</p><p>Key Responsibilities</p><ul><li>Design, evaluate, and optimize chemical processes and production systems.</li><li>Monitor plant operations and analyze process performance to identify improvement opportunities.</li><li>Conduct process calculations, simulations, and technical evaluations.</li><li>Support troubleshooting activities and implement corrective actions to resolve operational issues.</li><li>Ensure compliance with health, safety, environmental, and quality standards.</li><li>Prepare process documentation, technical reports, operating procedures, and engineering calculations.</li><li>Participate in plant commissioning, startup, shutdown, and process modification activities.</li><li>Coordinate with operations, maintenance, laboratory, and project teams to achieve production objectives.</li><li>Evaluate raw materials, equipment performance, and production efficiency.</li><li>Support process safety management initiatives and risk assessments.</li><li>Assist in implementing cost reduction, energy efficiency, and continuous improvement programs.</li><li>Provide technical support and training to operational personnel.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Chemical Engineering or a related engineering discipline.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in chemical engineering or industrial processes are an advantage.</li></ul><p>Technical Skills</p><ul><li>Basic knowledge of chemical engineering principles, process design, and optimization.</li><li>Familiarity with process calculations, mass and energy balances, and engineering analysis.</li><li>Understanding of process simulation tools such as Aspen HYSYS, Aspen Plus, or similar (advantage).</li><li>Awareness of process safety management and risk assessment concepts.</li><li>Basic knowledge of industrial equipment, instrumentation, and control systems.</li><li>Ability to read and interpret PFDs, P&amp;IDs, engineering drawings, and technical specifications.</li><li>Proficiency in Microsoft Office applications.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical expertise.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to safety and quality.</li></ul><p>Working Conditions</p><p>Office and plant-based work environments. May require site visits, plant inspections, troubleshooting activities, and support during shutdowns or emergency situations.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p><strong>Job title</strong> </p> <p>Expert Contract Engineer</p> <p> <strong>Grade</strong> </p> <p> </p> <p> <strong>Stream</strong> </p> <p>Finance </p> <p> <strong>Function</strong> </p> <p>Procurement </p> <p> <strong>Location</strong> </p> <p>Oman </p> <p> <strong>Budget control</strong> </p> <p>*OPEX and/or CAPEX and/or Revenue amount as relevant*</p> <p> <strong>Reporting to</strong> </p> <p>Manager Projects Contracts</p> <p> <strong>Direct Reports </strong> </p> <p>0</p> <p> <strong>Job purpose </strong> </p> <p>Provides engineering / technical support on contract processes, by coordinating and executing complex contract formation, award and administration processes and providing a quality service to internal customers in a customer-oriented and commercially advantageous manner; conducting reviews and considering legal aspects of contract award &amp; administration; conducting commercial bids evaluation and tenders and ensuring that costs are controlled; providing advice, guidance and support to the Project team for projects-related contracts including a variety of contracts such as Projects Contracts, EPC, Consultancy Service Contracts, FEED Contracts, Operational, Technical, and Maintenance Contracts and identifying opportunities for optimization, as well as investigating and supporting optimization proposals from other areas, in order to support the safe, reliable, efficient and optimal functioning of the unit s activities at optimum cost.</p> <p> </p> <p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p> <strong>Main tasks and responsibilities</strong> </p> <ul> <li>Drafts appropriate complex contractual and commercial terms and conditions to best serve and protect the Company s interests. Lead and provide advice to the team on Contract synergies and unify the common ones before start tendering processes.</li> <li>Provide thought and advise on development of tender specifications for Projects, EPC, Consultancy Service, FEED, Operational, Technical, etc. Contracts, in line with business expectations, risk perspective and applicable laws. </li> <li>Assist in the development of pre and post contracting strategies, plans and tactics in collaboration with end user department.</li> <li>Ensures the analysis of complex contract requests from the user departments and determines the appropriate method of procurement.</li> <li>Lead the execution and provide thought, advise, insights for full contract cycle from pre-award to post-award and carry out contract management until closeout Including the tender-board approvals. </li> <li>Assist in pre-award and post award contract management, including change management, insurance issues, claims mitigation &amp; settlement and contracts close out. This includes escalation of disputes whenever required with support of Legal.</li> <li>Provide expertise, transfer knowledge to contract engineers on how to draft complex contracts and commercial terms and conditions to best serve and protect the company interests. Including technical &amp; commercial recommendations. </li> <li>Advise and provide insights to end user for conducting technical evaluation. </li> <li>Support negotiations with vendors to realize the total economic value to the company considering quality and cost.</li> <li>Support tendering activities and contract management activities in alignment with the organization's policy and code of ethics to ensure the right contracts are in place to deliver value to internal customers.</li> <li>Provide expertise on supporting the management of contract disputes to ensure fair and timely resolution with vendors, including escalation of disputes where needed with the support of legal.</li> <li>Lead the frame to maintain relationship with suppliers within the region to ensure positive, constructive and cost-effective commercial agreements for the company.</li> <li>Monitor market trends and provide advise on accurate supply information to internal customers. </li> <li>Ensure the tracking for contract includes the latest tendering / contracts information and details. </li> <li>Promote and encourage the continuous learning and development among team members including knowledge sharing activities, transfer of knowledge, coaching and personal advise on Contracts procedures, etc. </li> <li>Maintain HSE as a priority through compliance with HSE rules and ensure that all contracts are fully compliance with company HSE policies.</li> </ul> <p> <strong>Key interactions</strong> </p> <p> <strong>Internal:</strong> OQ SAOC Streams, Tender Committee(s)</p> <p> <strong>External</strong>: Contractors, Vendors &amp; Suppliers, Board, Shareholders, governments bodies</p> <p> <strong>Notable Working Conditions. </strong>Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed.</p> <p> <strong>Education requirements</strong> </p> <ul> <li>Bachelor s degree in supply chain, Engineering, Production Operations Management, Business Administration or equivalent. </li> <li>Professional Certifications such CIPS is an added advantage. </li> <li>Master s degree, MBA or any special certifications related to the role is an added advantage.</li> </ul> <p> <strong>Language</strong> </p> <p>Excellent knowledge of written, read, and spoken English (required) </p> <p> <strong>Background and experience</strong> </p> <p> <strong>Competencies and skills</strong> </p> <ul> <li> <strong>A minimum 8 years experience in similar role. </strong> </li> <li>Deep understanding of tender law and tender procedures. </li> <li>Strong working experience in contracts cycle for a variety of contracts (Projects, FEED, EPC, corporate related contracts, project financing related contracts) </li> <li><br></li></ul><ul> </ul> <p> </p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Crushing &amp; Mills Maintenance is responsible for the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>Detailed Description </p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Perform maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Perform reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Perfom preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Perform advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Coordinate continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Coordinate a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 5+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Planning Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, and maintenance control processes to ensure safe, reliable, and efficient plant operations.This role supports leadership in maintenance planning and resource coordination, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p>Detailed Description </p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p>Develop and implement maintenance planning and scheduling processes.</p> <p>Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p>Review work requests and convert approved work into executable job plans.</p> <p>Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p>Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p>Monitor schedule compliance and planning effectiveness.</p> <p>Ensure maintenance backlogs are effectively managed and prioritized.</p> <p>Support development of maintenance strategies for critical equipment.</p> <p>Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p>Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p>Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p>Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p>Manage maintenance work management processes within ERP/CMMS systems.</p> <p>Ensure work order quality, data accuracy, and system compliance.</p> <p>Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p>Monitor key work management KPIs.</p> <p>Maintain planning and scheduling standards across all maintenance disciplines.</p> <p>Ensure historical maintenance records are maintained for reliability analysis.</p> <p>Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p>Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p>Develop integrated shutdown schedules and resource plans.</p> <p>Coordinate labor, equipment, materials, and contractor requirements.</p> <p>Monitor shutdown planning milestones and readiness reviews.</p> <p>Support execution teams during shutdown implementation.</p> <p>Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p>Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop maintenance planning and execution performance dashboards.</p> <p>Monitor KPIs including:</p> <p>Schedule Compliance</p> <p>PM Compliance</p> <p>Backlog Management</p> <p>Work Order Closure Rates</p> <p>Contractor Performance</p> <p>Maintenance Cost Performance</p> <p>Shutdown Performance</p> <p>Prepare weekly and monthly maintenance performance reports.</p> <p>Analyze trends and recommend improvement initiatives.</p> <p>Support annual maintenance budgeting and forecasting processes.</p> <p>CONTRACTOR &amp; RESOURCE MANAGEMENT</p> <p>Coordinate with contract administrator for mobilization and demobilization activities.</p> <p>Evaluate contractor performance and productivity.</p> <p>Ensure contractors comply with safety, quality, and environmental requirements.</p> <p>Optimize utilization of labor, equipment, and maintenance resources.</p> <p>Coordinate external specialist services and OEM support.</p> <p>LEADERSHIP &amp; TEAM MANAGEMENT</p> <p>Lead maintenance planners, schedulers from Contractors</p> <p>Develop workforce capability and succession plans.</p> <p>Promote a culture of accountability, collaboration, and continuous improvement.</p> <p>Ensure departmental objectives align with maintenance business goals.</p> <p>SAFETY &amp; COMPLIANCE</p> <p>Ensure compliance with company safety policies and procedures.</p> <p>Participate in risk assessments and shutdown safety planning.</p> <p>Ensure contractor compliance with permit-to-work and site safety requirements.</p> <p>Support incident investigations and corrective action implementation.</p> <p>Promote safe work practices and zero-harm objectives.</p> <p>BUDGET &amp; COST CONTROL</p> <p>Support preparation of annual maintenance budgets.</p> <p>Monitor maintenance expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Identify cost optimization opportunities without compromising reliability.</p> <p>Support spare parts and inventory management strategies.</p> <p>Provide cost forecasting and budget variance analysis.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field</p> <p><b>Experience: </b></p> <p> 10+ years of maintenance planning, shutdown planning, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and resources management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirabl</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Practitioner (CMRP)</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p> Maintenance Planning and Scheduling</p> <p> Work Management Systems</p> <p> Shutdown and turnaround planning</p> <p> SAP PM</p> <p> Budgeting and Cost Control</p> <p> Resource Planning</p> <p> Procurement Processes</p> <p> Contractor Performance Management</p> <p> Maintenance KPI Reporting and Analysis</p> <p> Inventory and Spare Parts Management</p> <p> Risk Management</p> <p>Soft Skills: </p> <p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for highly skilled Vibecode specialists to join the Tendem project (https://tendem.<br>ai/) and drive specialized data scraping workflows for real-world use cases.<br> Mindrift is looking for highly skilled Senior Python Data Scraping Engineers to join the Tendem project and drive specialized data scraping workflows for real-world applications.<br> In this role, you'll apply your expertise in web scraping, data extraction, and data processing to deliver accurate, reliable, and high-quality results.<br> This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Senior Python Data Scraping Engineer , you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing tools such as Apify, OpenRouter, and other technologies, alongside your own technical expertise and approaches.<br> Key Responsibilities Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.<br> Leverage available tools and custom workflows to accelerate data collection, validation, and task execution while meeting defined requirement.<br> Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.<br> Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.<br> Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.<br> Educational qualifications At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).<br> Bachelor’s or Master’s Degree in Engineering, Applied Mathematics, Computer Science, or related technical fields is a plus.<br> Academic and/or Professional Experience Candidates should have a strong technical foundation and practical experience with scripting, automation, and data extraction workflows.<br> We are looking for specialists who can solve non-trivial problems, work confidently with modern development tools and technologies, and systematically collect, structure, and validate data from diverse sources.<br> A methodical, detail-oriented approach and the ability to work independently are essential.<br> Technical Skills (Essential) Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML) Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets) Additional requirements Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks Strong attention to detail and commitment to data accuracy Self-directed work ethic with ability to troubleshoot independently A link to GitHub is a plus English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $37 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> <h4>Requirements:</h4> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>A link to GitHub is a plus.</li> <li>English proficiency: Upper-intermediate (B2) or above (required).</li> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: System Supply and Reporting Engineer</p><p>Reports To: IT Manager / Systems Manager</p><p>Job Details</p><p>Number of Vacancies: 3 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The System Supply and Reporting Engineer is responsible for managing system-related data, generating operational and management reports, supporting system performance, and ensuring the availability and accuracy of information required for business operations and decision-making.</p><p>Key Responsibilities</p><ul><li>Develop, maintain, and automate operational, technical, and management reports.</li><li>Monitor system performance and ensure data accuracy, integrity, and availability.</li><li>Collect, analyze, and interpret data from various systems to support business and operational requirements.</li><li>Design and maintain reporting dashboards and performance indicators.</li><li>Support system users by providing technical assistance related to reporting and data extraction.</li><li>Coordinate with internal departments to identify reporting needs and deliver effective reporting solutions.</li><li>Perform data validation and quality checks to ensure reliable reporting outputs.</li><li>Assist in system upgrades, testing, implementation, and integration activities.</li><li>Prepare technical documentation, user guides, and reporting procedures.</li><li>Ensure compliance with company policies, data governance standards, and information security requirements.</li><li>Identify opportunities to improve reporting processes and system efficiency.</li></ul><p>Qualifications</p><p>Bachelor s Degree in Information Technology, Computer Engineering, Computer Science, Telecommunications Engineering, Information Systems, or a related field.</p><p>Experience</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic projects in reporting, data analysis, or systems support are an advantage.</p><p>Technical Skills</p><ul><li>Proficiency in reporting and data analysis tools such as Power BI, SSRS, Tableau, or similar platforms.</li><li>Basic knowledge of SQL and database management systems.</li><li>Understanding of data extraction, transformation, and reporting processes.</li><li>Basic understanding of system administration and enterprise applications.</li><li>Familiarity with Microsoft Excel and Office applications.</li><li>Ability to analyze datasets and present findings clearly.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and stakeholder management abilities.</li><li>Willingness to learn and develop technical skills.</li><li>Ability to manage multiple priorities and meet deadlines.</li><li>Good organizational and documentation skills.</li><li>High attention to detail and accuracy.</li></ul><p>Working Conditions</p><p>Office-based work environment.</p><p>May require support during system upgrades, maintenance activities, or critical reporting periods.</p><p>Application Note :</p><p>The applicant must be a job seeker.</p><p>The applicant must be an Omani national.</p><p>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</p><p>The applicant must not have previously benefited from any training program funded by either the public or private sector.</p><p>The applicant must have no more than three (3) years of work experience.</p><p>The applicant must not be more than 38 years of age</p><p>The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Information Technology, Computer Engineering, Computer Science, Telecommunications Engineering, Information Systems, or a related field.</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic projects in reporting, data analysis, or systems support are an advantage.</p><p>Technical Skills</p><ul><li>Proficiency in reporting and data analysis tools such as Power BI, SSRS, Tableau, or similar platforms.</li><li>Basic knowledge of SQL and database management systems.</li><li>Understanding of data extraction, transformation, and reporting processes.</li><li>Basic understanding of system administration and enterprise applications.</li><li>Familiarity with Microsoft Excel and Office applications.</li><li>Ability to analyze datasets and present findings clearly.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and stakeholder management abilities.</li><li>Willingness to learn and develop technical skills.</li><li>Ability to manage multiple priorities and meet deadlines.</li><li>Good organizational and documentation skills.</li><li>High attention to detail and accuracy.</li></ul><p>Application Note :</p><p>The applicant must be a job seeker.</p><p>The applicant must be an Omani national.</p><p>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</p><p>The applicant must not have previously benefited from any training program funded by either the public or private sector.</p><p>The applicant must have no more than three (3) years of work experience.</p><p>The applicant must not be more than 38 years of age</p><p></p></section>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction, and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <ul> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> </ul> <h4>Requirements:</h4> <ul> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>A link to GitHub is a plus.</li> <li>English proficiency: Upper-intermediate (B2) or above (required).</li> </ul> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Infrastructure and Systems Engineer is responsible for designing, implementing, maintaining, and optimizing the organization's IT infrastructure and systems to ensure high availability, security, reliability, and performance of business operations.</p><p>Key Responsibilities</p><ul><li>Design, implement, and maintain IT infrastructure including servers, storage systems, virtualization platforms, and network services.</li><li>Monitor system performance, availability, and capacity to ensure efficient operation.</li><li>Install, configure, upgrade, and troubleshoot Windows and Linux server environments.</li><li>Manage and maintain Active Directory, DNS, DHCP, file services, and related infrastructure components.</li><li>Support virtualization technologies such as VMware, Hyper-V, or similar platforms.</li><li>Implement and maintain backup, disaster recovery, and business continuity solutions.</li><li>Monitor infrastructure security and support cybersecurity initiatives to protect organizational assets.</li><li>Perform preventive maintenance, system patching, and upgrades.</li><li>Troubleshoot and resolve infrastructure, server, and system-related issues.</li><li>Prepare and maintain technical documentation, system configurations, and operational procedures.</li><li>Coordinate with vendors, service providers, and internal teams to support infrastructure projects and operational requirements.</li><li>Ensure compliance with company policies, industry standards, and best practices.</li></ul><p>Technical Skills</p><ul><li>Strong knowledge of Windows Server and Linux operating systems.</li><li>Basic understanding of Active Directory, DNS, DHCP, Group Policy, and Microsoft services.</li><li>Familiarity with virtualization technologies such as VMware and Hyper-V.</li><li>Knowledge of backup and disaster recovery concepts.</li><li>Understanding of networking concepts such as TCP/IP, VLANs, routing, and firewalls.</li><li>Basic knowledge of cloud platforms such as Microsoft Azure or AWS is an advantage.</li><li>Ability to analyze system logs and troubleshoot technical issues.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical skills.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Excellent organizational and documentation skills.</li><li>Strong attention to detail and commitment to service quality.</li></ul><p>Working Conditions</p><ul><li>Office and data center environments.</li><li>May require after-hours support, maintenance activities, and emergency response during critical incidents.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Information Technology, Computer Engineering, Computer Science, Information Systems, Telecommunications Engineering, or a related field.</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic projects in IT infrastructure or systems administration are an advantage.</p><h2>Application Note</h2><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The CMMS Engineer is responsible for managing, developing, and optimizing the Computerized Maintenance Management System (CMMS) to support effective maintenance planning, asset management, work order control, and equipment reliability across the organization.</p><p>Key Responsibilities</p><ul><li>Administer and maintain the CMMS platform to ensure accurate and efficient maintenance operations.</li><li>Create, update, and manage equipment master data, asset registers, and maintenance plans.</li><li>Generate and manage work orders, preventive maintenance schedules, and maintenance notifications.</li><li>Monitor maintenance activities and ensure timely completion of work orders.</li><li>Analyze maintenance data to identify trends, failures, and improvement opportunities.</li><li>Develop KPIs, dashboards, and performance reports related to maintenance activities.</li><li>Support maintenance planning and scheduling with operations and maintenance teams.</li><li>Ensure data accuracy, integrity, and consistency within the CMMS system.</li><li>Assist in system upgrades, configuration, testing, and implementation of improvements.</li><li>Provide training and technical support to CMMS users.</li><li>Coordinate with engineering, procurement, and maintenance teams for effective asset management.</li><li>Ensure compliance with company maintenance standards and asset management best practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Information Technology, or related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic exposure in maintenance systems or asset management is an advantage.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of CMMS/EAM systems and maintenance workflows.</li><li>Understanding of preventive and corrective maintenance concepts.</li><li>Familiarity with data analysis and reporting tools.</li><li>Basic knowledge of asset management principles.</li><li>Awareness of industrial maintenance operations and equipment lifecycle.</li><li>Proficiency in Microsoft Excel and reporting tools.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong willingness to learn and develop technical skills.</li><li>Good analytical and problem-solving abilities.</li><li>Strong attention to detail and data accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to manage tasks under supervision and meet deadlines.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based with occasional site visits. May require support during maintenance shutdowns or system updates.</p><p><strong>Application Note</strong> :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<p><b>Brief Posting Description </b></p> <p>The Engineer Maintenance Contracts is responsible for administering and managing maintenance service contracts, supporting contractor performance management, coordinating procurement and commercial activities related to maintenance services, and ensuring contractual compliance across all maintenance operations. The role supports maintenance execution by managing contractor resources, contract documentation, tendering activities, service agreements, cost control, and vendor performance to ensure safe, reliable, and cost-effective plant operations. The position plays a key role in establishing contract management processes and supporting commissioning, start-up, and sustainable operational performance.</p> <p><b>Detailed Description </b></p> <p>CONTRACT ADMINISTRATION &amp; MANAGEMENT</p> <p>Administer maintenance service contracts, agreements, and framework arrangements to ensure compliance with company requirements and contractual obligations.</p> <p>Review, prepare, and manage scopes of work, technical specifications, service agreements, and contract documentation.</p> <p>Coordinate contract tendering, bid evaluations, technical assessments, and contractor selection processes.</p> <p>Monitor contract performance against agreed KPIs, deliverables, and service levels.</p> <p>Manage contract variations, claims, extensions, and contract close-out activities.</p> <p>Maintain accurate contract records, correspondence, and commercial documentation.</p> <p>Ensure all contracts are administered in accordance with company procurement and governance procedures.</p> <p>Use SAP for resource planning and manning</p> <p>Generate Power BI reports for contracts administration</p> <p>CONTRACTOR PERFORMANCE MANAGEMENT</p> <p>Monitor contractor performance, productivity, and compliance with contractual requirements.</p> <p>Conduct regular contractor performance reviews and KPI assessments.</p> <p>Coordinate contractor mobilization and demobilization activities.</p> <p>Support development and implementation of contractor improvement plans where required.</p> <p>Ensure contractor resources meet operational, technical, and safety requirements.</p> <p>Maintain effective working relationships with contractors, suppliers, and external service providers.</p> <p>PROCUREMENT &amp; COMMERCIAL SUPPORT</p> <p>Work closely with Procurement and Maintenance teams to support sourcing of maintenance services and contracts.</p> <p>Participate in commercial and technical evaluations of contractor bids and proposals.</p> <p>Support contract negotiations, renewals, and service level agreements.</p> <p>Review contractor invoices and verify work completion in accordance with contract terms.</p> <p>Assist in the preparation of budget estimates and cost forecasts related to maintenance contracts.</p> <p>Identify opportunities for cost optimization and value improvement while maintaining service quality.</p> <p>MAINTENANCE SUPPORT COORDINATION</p> <p>Coordinate with maintenance planners, supervisors, and operations teams to ensure contracted services are delivered effectively.</p> <p>Support execution of planned maintenance, shutdowns, and special projects through contractor coordination.</p> <p>Ensure timely availability of external specialist services and OEM support.</p> <p>Facilitate communication between contractors and site stakeholders.</p> <p>Monitor contractor resource allocation to support maintenance objectives.</p> <p>SHUTDOWN &amp; PROJECT CONTRACT SUPPORT</p> <p>Support contract planning and administration activities for shutdowns, turnarounds, and major maintenance projects.</p> <p>Coordinate contractor readiness reviews, resource planning, and mobilization requirements.</p> <p>Monitor contractor performance during shutdown execution.</p> <p>Assist with post-shutdown contract evaluations and lessons learned reviews.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop and maintain contract performance reports and dashboards.</p> <p>Monitor and report key performance indicators, including:</p> <p>Contractor Performance</p> <p>Service Level Compliance</p> <p>Contract Utilization</p> <p>Cost Performance</p> <p>Contractor Safety Performance</p> <p>Invoice Processing Efficiency</p> <p>Prepare periodic reports for management on contract status and performance.</p> <p>Analyze trends and recommend improvement opportunities.</p> <p>SAFETY, QUALITY &amp; COMPLIANCE</p> <p>Ensure contractors comply with company health, safety, environmental, and quality requirements.</p> <p>Participate in contractor safety audits, inspections, and risk assessments.</p> <p>Verify contractor compliance with permit-to-work systems and site procedures.</p> <p>Support incident investigations involving contractors and ensure corrective actions are implemented.</p> <p>Promote a strong safety culture and adherence to company standards.</p> <p>STAKEHOLDER MANAGEMENT</p> <p>Maintain effective relationships with internal stakeholders, contractors, suppliers, and service providers.</p> <p>Provide contract-related advice and support to Maintenance, Procurement, Finance, and Operations teams.</p> <p>Support development and implementation of contract management best practices.</p> <p>Participate in continuous improvement initiatives to enhance contract performance and operational efficiency.</p> <p>COST CONTROL &amp; BUDGET MANAGEMENT</p> <p>Monitor maintenance contract expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Review cost trends and identify opportunities for savings.</p> <p>Support annual budgeting and forecasting activities for maintenance contracts.</p> <p>Ensure accurate cost allocation and reporting for contracted services.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> </p> <p> Bachelor s degree or Higher Diploma</p> <p> </p> <p>Experience: </p> <p> Bachelor s degree with 7+ years or Higher Diploma with 10+ years of maintenance planning, shutdown planning, contracts administration, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and contractor management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> </p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Maintenance Contracts is responsible for administering and managing maintenance service contracts, supporting contractor performance management, coordinating procurement and commercial activities related to maintenance services, and ensuring contractual compliance across all maintenance operations. The role supports maintenance execution by managing contractor resources, contract documentation, tendering activities, service agreements, cost control, and vendor performance to ensure safe, reliable, and cost-effective plant operations. The position plays a key role in establishing contract management processes and supporting commissioning, start-up, and sustainable operational performance.</p> <p><b>Detailed Description </b></p> <p>CONTRACT ADMINISTRATION &amp; MANAGEMENT</p> <p>Administer maintenance service contracts, agreements, and framework arrangements to ensure compliance with company requirements and contractual obligations.</p> <p>Review, prepare, and manage scopes of work, technical specifications, service agreements, and contract documentation.</p> <p>Coordinate contract tendering, bid evaluations, technical assessments, and contractor selection processes.</p> <p>Monitor contract performance against agreed KPIs, deliverables, and service levels.</p> <p>Manage contract variations, claims, extensions, and contract close-out activities.</p> <p>Maintain accurate contract records, correspondence, and commercial documentation.</p> <p>Ensure all contracts are administered in accordance with company procurement and governance procedures.</p> <p>Use SAP for resource planning and manning</p> <p>Generate Power BI reports for contracts administration</p> <p>CONTRACTOR PERFORMANCE MANAGEMENT</p> <p>Monitor contractor performance, productivity, and compliance with contractual requirements.</p> <p>Conduct regular contractor performance reviews and KPI assessments.</p> <p>Coordinate contractor mobilization and demobilization activities.</p> <p>Support development and implementation of contractor improvement plans where required.</p> <p>Ensure contractor resources meet operational, technical, and safety requirements.</p> <p>Maintain effective working relationships with contractors, suppliers, and external service providers.</p> <p>PROCUREMENT &amp; COMMERCIAL SUPPORT</p> <p>Work closely with Procurement and Maintenance teams to support sourcing of maintenance services and contracts.</p> <p>Participate in commercial and technical evaluations of contractor bids and proposals.</p> <p>Support contract negotiations, renewals, and service level agreements.</p> <p>Review contractor invoices and verify work completion in accordance with contract terms.</p> <p>Assist in the preparation of budget estimates and cost forecasts related to maintenance contracts.</p> <p>Identify opportunities for cost optimization and value improvement while maintaining service quality.</p> <p>MAINTENANCE SUPPORT COORDINATION</p> <p>Coordinate with maintenance planners, supervisors, and operations teams to ensure contracted services are delivered effectively.</p> <p>Support execution of planned maintenance, shutdowns, and special projects through contractor coordination.</p> <p>Ensure timely availability of external specialist services and OEM support.</p> <p>Facilitate communication between contractors and site stakeholders.</p> <p>Monitor contractor resource allocation to support maintenance objectives.</p> <p>SHUTDOWN &amp; PROJECT CONTRACT SUPPORT</p> <p>Support contract planning and administration activities for shutdowns, turnarounds, and major maintenance projects.</p> <p>Coordinate contractor readiness reviews, resource planning, and mobilization requirements.</p> <p>Monitor contractor performance during shutdown execution.</p> <p>Assist with post-shutdown contract evaluations and lessons learned reviews.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop and maintain contract performance reports and dashboards.</p> <p>Monitor and report key performance indicators, including:</p> <p>Contractor Performance</p> <p>Service Level Compliance</p> <p>Contract Utilization</p> <p>Cost Performance</p> <p>Contractor Safety Performance</p> <p>Invoice Processing Efficiency</p> <p>Prepare periodic reports for management on contract status and performance.</p> <p>Analyze trends and recommend improvement opportunities.</p> <p>SAFETY, QUALITY &amp; COMPLIANCE</p> <p>Ensure contractors comply with company health, safety, environmental, and quality requirements.</p> <p>Participate in contractor safety audits, inspections, and risk assessments.</p> <p>Verify contractor compliance with permit-to-work systems and site procedures.</p> <p>Support incident investigations involving contractors and ensure corrective actions are implemented.</p> <p>Promote a strong safety culture and adherence to company standards.</p> <p>STAKEHOLDER MANAGEMENT</p> <p>Maintain effective relationships with internal stakeholders, contractors, suppliers, and service providers.</p> <p>Provide contract-related advice and support to Maintenance, Procurement, Finance, and Operations teams.</p> <p>Support development and implementation of contract management best practices.</p> <p>Participate in continuous improvement initiatives to enhance contract performance and operational efficiency.</p> <p>COST CONTROL &amp; BUDGET MANAGEMENT</p> <p>Monitor maintenance contract expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Review cost trends and identify opportunities for savings.</p> <p>Support annual budgeting and forecasting activities for maintenance contracts.</p> <p>Ensure accurate cost allocation and reporting for contracted services.</p> <p>Job Requirements </p> <p>Education: </p> <p> Bachelor s degree or Higher Diploma</p> <p>Experience: </p> <p> Bachelor s degree with 10+ years or Higher Diploma with 15+ years of maintenance planning, shutdown planning, contracts administration, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Minimum 8 years in a supervisory or level role.</p> <p> Proven experience with large-scale shutdown planning and contractor management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Hydraulics &amp; Lubrication Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of hydraulic and lubrication systems across the Copper Concentrator Plant.The role ensures the safe, reliable, and cost-effective operation of hydraulic power units (HPUs), centralized lubrication systems, oil circulation systems, hydraulic cylinders, pumps, motors, valves, accumulators, filtration systems, cooling systems, gear lubrication systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of hydraulic and lubrication systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, and associated mechanical equipment.The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards</p> <p>Detailed Description </p> <p>HYDRAULICS &amp; LUBRICATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for hydraulic and lubrication systems associated with the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on hydraulic and lubrication maintenance planning, scheduling, and execution.</p> <p>Establish lubrication excellence and contamination control programs across all critical assets.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for hydraulic power units, lubrication skids, gear lubrication systems, pumps, cylinders, valves, accumulators, filtration systems, coolers, and associated equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Drive oil analysis and contamination control programs for critical plant equipment.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for hydraulic and lubrication assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>Develop lubrication routes, inspection programs, and condition-based maintenance plans.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of hydraulic and lubrication system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of hydraulic and lubrication systems associated with critical plant assets.</p> <p>Monitor performance of lubrication systems, oil circulation systems, filtration units, accumulators, and hydraulic power units.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Maintain hydraulic cleanliness targets and lubrication management standards.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is must.</p> <p> Minimum 8 years of experience in hydraulic and lubrication maintenance and reliability engineering is must.</p> <p> Proven track record of successfully managing maintenance and reliability of critical hydraulic and lubrication assets in large-scale mineral processing plants.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage</p> <p> ICML Machinery Lubrication Technician (MLT)</p> <p> ICML Machinery Lubrication Analyst (MLA)</p> <p> Six-sigma (BB)</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical &amp; Instrumentation Engineering is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Conveyors &amp; Utilities Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of conveyor systems, stacking systems, reclaiming systems, feeders, transfer stations, utility systems, and associated plant equipment within mineral processing operations. The role ensures the safe, reliable, and cost-effective operation of conveyors and utility assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>The incumbent is responsible for the maintenance and reliability of conveyor belts, pulleys, idlers, drives, gearboxes, feeders, stacking systems, reclaiming systems, compressed air systems, process water systems, fire water systems, pumps, utility distribution networks, and associated mechanical equipment. The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, utility availability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>CONVEYORS &amp; UTILITIES MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for conveyor systems, transfer stations, feeders, stacking &amp; reclaiming systems, utility systems, pumps, compressors, and auxiliary equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on maintenance planning, scheduling, and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for conveyors, pulleys, idlers, belt cleaners, drives, gearboxes, feeders, pumps, compressors, and utility systems.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for conveyor and utility assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of conveyor, stacker, reclaimer, and utility system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the mechanical integrity of critical conveyors and utility equipment.</p> <p>Monitor wear-life performance of belts, pulleys, idlers, chutes, drives, pumps, compressors, and utility systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major conveyor and utility equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance and reliability issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review of OEM recommendations, technical reports, and equipment upgrade proposals.</p> <p>Support commissioning, testing, and startup of new equipment and system modifications.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to enhance conveyor availability, material handling efficiency, utility system reliability, and plant throughput.</p> <p>Identify opportunities to reduce maintenance costs and minimize unplanned downtime.</p> <p>Implement reliability improvement and Lean Maintenance methodologies.</p> <p>Develop business cases for equipment upgrades and improvement projects.</p> <p>Track and report benefits realized from improvement initiatives.</p> <p>Promote maintenance and operational best practices across the organization.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide Operational Support at OQEP, Operated Assets Operations Support, under TL Operation Support scope s by delivering of a best practice operational strategies and results; in order to ensure safe and efficient operations at the site.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><h3>Common for All Levels</h3><p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations.</p><p>Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations.</p><p>Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications.</p><p>Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements.</p><p>Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues.</p><p>Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters.</p><p>Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements.</p><p>Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage.</p><p>Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices.</p><h3>Engineer Operation Support</h3><p>Execute assigned engineering and operational support tasks under supervision.</p><p>Apply approved engineering procedures, standards, and work practices during execution and operations.</p><p>Support commissioning, start up, and operational activities as part of a multi disciplinary team.</p><p>Contribute to studies, reviews, and troubleshooting activities under guidance.</p><h3>Senior Engineer Operation Support</h3><p>Independently handle multiple operational support and execution scopes across on plot and off plot facilities.</p><p>Provide technical guidance and mentoring to junior engineers and trainees.</p><p>Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment.</p><p>Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs).</p><p>Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives.</p><p>Manage technical aspects of procurement, bid evaluation, and vendor document reviews.</p><h3>Lead Engineer Operation Support</h3><p>Act as technical authority for operational support across on plot and off plot upstream facilities.</p><p>Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams.</p><p>Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases.</p><p>Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance.</p><p>Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders.</p><p>Support capability development, succession planning, and continuous improvement within Operation Support.</p><h2>Key interactions</h2><p>Internal: Operated Assets functions.</p><p>External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Background</h2><p>5+ years of relevant experience</p><p>Adaptable and motivated engineering professional who thrives in complex operational and project environments.</p><p>Experience in engineering design support and troubleshooting within upstream surface facilities.</p><p>Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support.</p><p>Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes.</p><p>Working knowledge of Quality Assurance, Quality Control, and HSE requirements.</p><p>Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h2>Soft Skills</h2><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity.</p><p>Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration.</p><p>Ability to manage multiple priorities in a dynamic, time critical operational environment.</p><p>Analytical and fact based approach to problem solving and decision making.</p><p>Strong troubleshooting mindset and result oriented attitude.</p><h2>Technical Skills</h2><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office).</p><p>Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines.</p><p>Knowledge of resource coordination, interface management, and basic contract administration.</p><p>Experience in Root Cause Analysis (RCA) and structured problem solving techniques.</p><p>Ability to read and interpret engineering drawings, specifications, and vendor documentation.</p><p>Basic understanding of project execution and project management principles.</p><p>Ability to support the development, review, and modification of technical and operational procedures.</p><p>Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p><p></p></section>