وظائف فايبر جلاس في سلطنة عمان

<p>Role &amp; responsibilities Supervise daily production activities for: o GRP/FRP panel water tanks o SMC electrical enclosures and cabinets Plan and allocate manpower, machines, and materials to meet production schedules. Monitor production output and ensure on-time delivery. Optimize workflow and minimize production downtime. Coordinate with planning, quality, maintenance, and warehouse departments. Supervise the operation of: o Hydraulic compression press machines o SMC molding presses o FRP/GRP fabrication equipment o Trimming, drilling, cutting, and finishing equipment Ensure machines are operated safely and efficiently. Coordinate preventive maintenance and report equipment breakdowns. Monitor machine performance and recommend improvements. Ensure manufactured products meet customer specifications and quality standards. Conduct in-process inspections and final product verification. Monitor dimensional accuracy, surface finish, curing quality, and assembly. Coordinate corrective and preventive actions for quality issues. Reduce defects, rework, and material wastage. Enforce workplace safety policies and procedures. Ensure proper use of PPE by all employees. Maintain safe handling of resins, fiberglass, catalysts, and chemicals. Conduct daily safety inspections. Report accidents, incidents, and near misses. Promote 5S and good housekeeping practices. Supervise production operators, technicians, and helpers. Assign daily work and monitor employee performance. Train new employees on production processes and safety requirements. Conduct toolbox talks and shift meetings. Motivate employees to achieve productivity and quality targets. Monitor raw material consumption. Coordinate material availability with stores and procurement. Control production waste and improve material utilization. Maintain proper storage of SMC sheets, resins, fiberglass, and finished products. Prepare daily production reports. Record machine downtime and maintenance requests. Maintain production, quality, and safety records. Report production performance and issues to management. Monitor key performance indicators (KPIs) such as productivity, quality, efficiency, and downtime. Identify opportunities to improve manufacturing processes. Implement Lean Manufacturing and 5S initiatives. Recommend process improvements to increase productivity and reduce costs. Support new product development and process validation.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have practical, hands-on experience in at least two of the three areas, and working knowledge of the third GRP / FRP hand lay-up, filament winding, and laminating processes. Acrylic sheet thermoforming, vacuum forming, and resin/fibre glass reinforcement. SMC / DMC compression moulding using hydraulic hot presses. Strong leadership and organizational skills. Excellent problem-solving and decision-making abilities. Effective communication and interpersonal skills. Minimum 56 years of experience in GRP/FRP manufacturing, preferably in panel water tanks and SMC molded products</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Renewable Energy Technician, you will support the production of wind turbine blades and the mechanical and electrical assembly of nacelle and hub systems. This entry-level role provides hands-on experience in composite manufacturing, structural assembly, mechanical integration, electrical installation, process control, and quality-controlled production processes.</p> <p>Trainees will work under the supervision of engineers, trainers, and senior technicians to ensure that all production activities meet strict quality, safety, documentation, and performance standards. The program is designed to develop practical manufacturing competencies required for future employment in wind turbine component production.</p> <p><strong>Key Responsibilities and Training Scope: br&gt;</strong></p> <p><strong>Blade Manufacturing and Composite Production</strong></p> <ul> <li>Participate in theoretical and practical training on wind turbine blade structure, factory rules and discipline, attendance and working time management, cutting room processes, raw materials, molds, supporting equipment, and workplace safety.</li> <li>Assist in mold preparation, material cutting and kitting, fabric layup, overlap control, core material protection, root prefabrication, precast component production, spar cap/main beam preparation, shell production, and related fixture operations.</li> <li>Handle fiberglass, carbon fiber, resins, bonding agents, core materials, auxiliary materials, and consumables in accordance with work instructions, safety requirements, and production procedures.</li> <li>Support resin infusion, vacuum preparation, infusion layout, valve operation, curing profile control, blanket covering, hardness/TG checks, debagging, demolding, and auxiliary material removal.</li> <li>Support web bonding and shell bonding activities, including bonding surface preparation, glue mixing, paste application, gantry and lifting fixture positioning, dry-fit checks, bonding gap adjustment, perimeter vacuum control, mold closing, and inner reinforcement layup.</li> <li>Perform trimming, root surface trimming, and root milling support, sanding, grinding, putty application, surface finishing, touch-up, coating, painting, leading-edge protection, add-ons installation, marking, and delivery/shipping preparation.</li> <li>Support blade weighing, weight-balance calculation, balance correction, production record preparation, certificate of conformity inspection support, and final production documentation.</li> <li>Identify defects, support repair activities, follow NCR and repair processes, and participate in defect improvement and root-cause corrective action activities under supervision.</li> </ul> <p><strong>Nacelle and Hub Assembly</strong></p> <ul> <li>Support the assembly of nacelle structures and hub-related mechanical systems in accordance with engineering documentation, standard operating procedures, and production plans.</li> <li>Assist in the installation and integration of major nacelle components, including gearbox, generator, main shaft, yaw system, cooling systems, hydraulic systems, and related structural and mechanical parts.</li> <li>Install mechanical components, electrical cabling, hydraulic lines, and auxiliary systems while following approved work instructions and safety requirements.</li> <li>Use torque tools, measuring instruments, and precision assembly equipment to meet specified tolerances and assembly requirements.</li> <li>Assist in alignment checks, functional testing, pre-dispatch inspections, and readiness checks before delivery or handover.</li> <li>Maintain production records and follow standardized work procedures, quality checklists, and engineering documentation.</li> </ul> <p><strong>Quality Assurance, Safety, Process, and Maintenance Exposure</strong></p> <ul> <li>Receive basic quality and inspection training, including the use of measuring instruments, quality checklists, production records, and inspection documentation.</li> <li>Support raw material inspection for main and auxiliary materials, visual inspections, dimensional checks, process checks, defect criteria learning, and onsite quality-control activities.</li> <li>Learn quality control points for component production, shell layup, infusion and curing, debagging, web bonding, shell bonding, finishing, paint inspection, UT scan support, and certificate of conformity documentation.</li> <li>Follow PPE requirements, safety education, job safety analysis requirements, workplace hazard identification, daily safety inspection</li> <li>Understand production compliance with SOPs, drawing review, production daily reporting, defect repair follow-up, root-cause corrective action, and continuous improvement activities.</li> <li>Gain exposure to operation and basic maintenance of production equipment such as vacuum pumps, infusion machines, paste/glue machines, gantries, rotation equipment, root milling machines, molds, and related facilities.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Higher Diploma in Mechanical Engineering, Electrical Engineering, or Chemical Engineering or related field.</strong></p> <ul> <li>Recent graduate or up to three (3) years of internship or work experience in manufacturing or industrial environments.</li> <li>Must be under thirty-five (35) years of age.</li> <li>Candidates must not have previously benefited from any government or private initiative.</li> <li>Candidates must be registered as a job seeker or must have resigned from their previous employment for at least three (3) months.</li> <li>Fluency in English, with good documentation, reporting, and communication skills.</li> <li>Willingness and ability to participate in full-time training, possible shift work, and international deployment to China where required.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The General Manager – Aluminium &amp; Facade Works is a senior leadership role with in comapny Facade Sub-Contracting Division. Operating directly under the Head of Aluminium, Glass, Carpentry &amp; Fitout, the GM is accountable for the full P&amp;L, technical delivery, commercial performance, and strategic growth of the Aluminium Facade business line. The incumbent will mirror the structure of the existing GM – Fitout and GM – Glass positions, completing a unified divisional leadership team. The role demands a rare blend of deep technical mastery in aluminium systems, sharp commercial acumen, disciplined project and contract governance, and the executive presence to expand the business into new regional markets </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Technical Depth</strong> Proven expertise in curtain wall (stick, unitised), SSG, window wall, cladding systems, and fire-rated facades. Hands-on experience with mock-up testing, facade audits, and system certifications. <strong>Contract Knowledge </strong>Deep understanding of FIDIC Red, Yellow &amp; Silver Books, NEC, SBD, and bespoke GCC subcontract forms. Demonstrated track record of claims preparation, negotiation, and recovery. <strong>Commercial Track Record</strong> Experience managing annual revenue portfolios in excess of OMR 10 million (or equivalent). Proven ability to protect and improve margins in a competitive tendering environment. </p><p></p></section>

<p>Responsible for the design, operation, and optimization of the industrial network and SCADA communication infrastructure supporting wastewater treatment plants, pumping stations, reservoirs, and remote assets. Ensures high availability, redundancy, secure connectivity, and continuous data flow across all control system components.</p><p><b><br></b></p><p><b>Key Responsibilities:</b></p><ul><li>Design and maintain SCADA network architecture for wastewater facilities and remote pumping stations.</li><li>Configure and manage industrial switches, routers, fiber networks, and communication links.</li><li>Implement and maintain network redundancy and failover mechanisms.</li><li>Monitor network performance, availability, and fault diagnostics.</li><li>Support SCADA data communication between PLCs, RTUs, and control room systems.</li><li>Coordinate with cybersecurity team on network segmentation and secure architecture.</li><li>Support disaster recovery and business continuity planning.</li><li>Participate in FAT/SAT, commissioning, and system upgrades.</li><li>Perform any other duties assigned by NDS Management as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications &amp; Experience:</p><ul><li>Bachelor s degree in Electrical Engineering, Control Systems, Computer Engineering, or related field.</li><li>Minimum 10 years of experience in SCADA / ICS environments, preferably in water or wastewater utilities.</li><li>Proven experience in managing industrial Ethernet networks (Layer 2/3).</li><li>Strong knowledge of:<ul><li>VLANs, RSTP/MSTP, routing fundamentals</li><li>SNMP configuration and network monitoring</li><li>Industrial communication protocols (Modbus TCP/IP, DNP3, IEC 60870-5-104, etc.)</li></ul></li><li>Hands-on experience in designing redundancy and high-availability architectures.</li></ul><p>Preferred Certifications:</p><ul><li>CCNA / CCNP (or industrial networking equivalent)</li><li>Vendor SCADA/network certification (e.g., Siemens, Schneider, GE)</li><li>ITIL Foundation (optional)</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Telecommunication Engineer</p><p>Reports To: Telecommunications Manager / Engineering Manager</p><p>Job Details</p><p>Number of Vacancies: 2 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Telecommunication Engineer is responsible for designing, implementing, maintaining, and optimizing telecommunications systems and networks to ensure reliable, efficient, and secure communication services across the organization.</p><p>Key Responsibilities</p><ul><li>Design, implement, and maintain telecommunications infrastructure, including voice, data, and wireless communication systems.</li><li>Monitor network performance and ensure the availability and reliability of telecommunication services.</li><li>Troubleshoot and resolve telecommunications and network-related issues.</li><li>Support the installation, configuration, testing, and commissioning of telecommunication equipment and systems.</li><li>Conduct preventive and corrective maintenance activities for communication networks and equipment.</li><li>Coordinate with vendors, contractors, and service providers to support telecommunications projects and operations.</li><li>Ensure compliance with company standards, telecommunications regulations, and industry best practices.</li><li>Prepare technical reports, network documentation, drawings, and operational procedures.</li><li>Evaluate and recommend upgrades and improvements to telecommunications systems.</li><li>Provide technical support and guidance to internal teams and end users.</li></ul><p>Qualifications</p><p>Bachelor s Degree in Telecommunications Engineering, Electronics Engineering, Electrical Engineering, Communications Engineering, or a related field.</p><p>Experience</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic projects in telecommunications are an advantage.</p><p>Technical Skills</p><ul><li>Knowledge of telecommunications networks, transmission systems, and communication protocols.</li><li>Basic understanding of fiber optic networks, wireless communication systems, and IP-based technologies.</li><li>Familiarity with routing, switching, VoIP, and network security principles.</li><li>Basic knowledge of network monitoring and troubleshooting tools.</li><li>Ability to read and interpret technical drawings, network diagrams, and specifications.</li><li>Understanding of telecommunications standards and regulations.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical skills.</li><li>Ability to work under pressure and manage multiple tasks.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to quality.</li></ul><p>Working Conditions</p><p>Office and field-based work environments. May require site visits, network maintenance activities, and support during outages or emergency situations.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Telecommunications Engineering, Electronics Engineering, Electrical Engineering, Communications Engineering, or a related field.</li><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in telecommunications are an advantage.</li><li>Knowledge of telecommunications networks, transmission systems, and communication protocols.</li><li>Basic understanding of fiber optic networks, wireless communication systems, and IP-based technologies.</li><li>Familiarity with routing, switching, VoIP, and network security principles.</li><li>Basic knowledge of network monitoring and troubleshooting tools.</li><li>Ability to read and interpret technical drawings, network diagrams, and specifications.</li><li>Understanding of telecommunications standards and regulations.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical skills.</li><li>Ability to work under pressure and manage multiple tasks.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to quality.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design &amp; Commissioning Engineer Security &amp; Telecom Summary Engineering Graduate with minimum 5-7 years of relevant experience in commissioning of Security system products like Milestone, Genetec, Lenel, CEM System, Softwarehouse, Honelywell, Bosch, Gallaget, Senstar and Southwest Microwave, responsible entire commissioning and technical compliance. Key Job responsibilities and duties Reporting to Technical Lead on all technical related points Analyze system hardware and software requirements for all assigned Security &amp; Telecom System Project BOQ and design properly as per Project requirement Review and ensure Technical Correctness of MAS and Procurement. Designs and/or engineers Security &amp; Telecom systems including but not limited to Access Control system, physical security, intrusion, Video Management System, Fiber optic solution, Structured Cabling solutions, Networking, Telephony, Storage etc. Defines all Technical architectures components including, hardware, software, OS, performance and monitoring of projects assigned, in alignment with all compliance and best practice guidelines. Completes all system design(s) and engineering to core engineering standards. Acts as technical design owner and subject matter expert for assigned projects. Guide and Check system design layouts and installation specifications, including design documents and drawings prepared by Draughtsman/Team. Recommends the use of existing and new technologies to ensure core objectives are met for all security and Telecom projects. Conduct analyses and provide direction and support for Sales/Procurement/Service/Project Team. Maintains expertise in the principles and techniques required for hardware and software system integration. Responsible for all system upgradation and ensure the systems are having latest update. Maintains knowledge of current and emerging technologies and industry best practices related to all security &amp; Telecom systems. Proposes and implements best practices and tools supporting these technologies and practices. Develops system integration skills. Attends industry seminars and /or training sessions in order to stay current with all new security technologies and integration principles. Responsible for successful completion of Factory Acceptance Test, Commissioning, Site Acceptance Test and Client approvals for assigned projects. Develop and articulates a coherent technology architecture and system wide integration for all the Technical Security Systems as project requirement. Inspect, review and approve the erection, cabling and termination works at site as required. Coordinate with system vendors and customer as necessary to implement, integrate, update and test the system. Responsible to maintain the technical documentation as per the standards. Provide the commissioning report, checklist, cause and effect matrix etc., Responsible in managing Teams in delivering client SLA without NCR and in meeting client expectations. Responsible for all technicalities and Level2 &amp; Level3 support to teams in maintaining the Low current systems like CCTV Surveillance Systems, Electronic Access Control Systems, Gates &amp; HVM, PIDS, Electrified Fence, BMS, LCS, AV systems, ICT and Telecom Systems etc. Responsible for all system upgradation and ensure the systems are having latest update. Perform &amp; work on all upgradations [to keep up the systems to latest versions] as per OEM guidelines, migrations, and expansion works in all aspects. Also, to ensure all integration works and compatibility. Responsible for SSA/CarePlus/SUP, and maintaining all clients. Highlight the renewal date of SSA/Careplus/SUP timely to get it renewed. Responsible for handing client technical queries. Conduct Training for Customer and In-house Team. Technical Presentation and lead POC/Demo to customer as required. Responsible to maintain the technical documentation as per the standards. Ensure the client satisfaction throughout the project phase in terms of technical. KPI: K.P.I sTarget % A) System commissioning, SAT and client approvals as per project schedule in line with contractual requirements and product specifications and capabilities. Commissioning the systems, up to the product specs and client expectations in line with the product capabilities B) Pro-active Pre-commissioning and timely and trouble-free commissioning works 35%To maintain all client systems up to date version, and successfully manage upgradation works, Expansion, migration works, to ensure efficient integrations and its compatibility.20%Client SLA and satisfaction levels. In meeting best performance as per ERP analysis.10%Technical documentation works, Service Analysis, better communication internal and external, regular DAR etc10%Expert knowledge on Milestone Xprotect, CEM Systems AC2000, Lenel OnGuard, Pelco VideoXpert, Paxton, Gallagher etc., Technical and Expert Support Levels for all products, and in maintaining product certifications.10%Client Relation and Handlings5%Attitude, Punctuality, Interpersonal skills5%Ensure QHSE and ISO compliance and no NCR in ISO implementation related to Project &amp; service Operations5%</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT Experience - Engineering Graduate with minimum 5-7 years of relevant experience in managing major turnkey EPC security projects. Preferred Experience of 2-3 years in Middle East region &amp; having valid Oman driving license. 2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as commissioning Engineer position. The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc. In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</p><p></p></section>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office. Position is based in Musandam, Oman for a long-term assignment. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li><li>Certified Lead Auditor to any of the Management Systems ISO 9001 / ISO 14001 / OHSAS 18001.</li><li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li><li>Minimum Experience: Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry.</li><li>Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry.</li><li>Inspection and testing experience at manufacturing units and Construction sites required.</li><li>Multidiscipline Quality Control experience is preferred.</li><li>Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.</li><li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment.</li><li>Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li><li>Good Knowledge in the application of industry codes and standards</li></ul>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Assistant Chief Steward, I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness. </p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and its strategic planning and development and ensure all directives, practices and initiatives are implemented, embraced, adopted within the resort.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong>&nbsp;</p><br><p>As Assistant Chief Steward, I will assume full responsibility for the efficient operation of the Stewarding Department to provide exceptional product and service within brand operating standards. </p><br><p>The duties and responsibilities will include:</p><br><ul><li>Manage the stewarding function in all kitchen areas to promote overall cleanliness, sanitation and compliance with state and local health regulations. </li><li>Determine the minimum and maximum stocks and control the par stocks of all materials and equipment. </li><li>Liaise with the Purchasing Department and suppliers regarding purchasing needs for the stewarding operation. </li><li>Setting up work stations, cleanliness and storage of dishes, filling dish machines, ensuring correct chemical levels, maintaining efficient traffic patterns in kitchen, etc. </li><li>Control storeroom orders and issue all china, silver and glass. Ensure all food and beverage outlets have sufficient equipment to perform adequately. </li><li>Supervise day-to-day operations and assignments of the stewarding staff, communicate objectives and expectations, and assign/schedule work. Communicate and enforce policies and procedures. </li><li>Control and analyze cost, breakage and quality of support provided to outlets, banquets and other areas. </li><li>Control expenses in accordance with established budget. Maintain procedures for security of inventory. </li><li>Operate the department consistent with all legal, statutory and financial requirements and documentation, reporting systems, contractual obligations, security and safety protocols, communications, product and service standards, host management practices and budgetary controls are implemented, reviewed and maintained to ensure the successful operation of the hotel. </li></ul><p><strong>Qualifications</strong></p><br><p>To execute the position of Assistant Chief Steward, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><ul><li>High school diploma or equivalent and two years’ experience in stewarding, kitchen maintenance, kitchen operations or similar, with at least one year in a supervisory capacity.</li><li>Knowledge of food and beverage service operation preferred. </li><li>Alcohol awareness certification and/or food service permit or valid health/food handler card as required by local or state government agency. </li><li>Able to thrive in multi cultural teams and has strong leadership skills.</li><li>I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</li></ul><p><i>The above is intended to provide an overview of the role and responsibilities for Assistant Chief Steward at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent in the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Summary Engineering Graduate with minimum 8-10 years of relevant experience in managing major turnkey EPC security projects, responsible for cost/budget control and schedule control.</p><p>Key Job responsibilities and duties</p><ul><li>Manage the assigned project operations completely from Project Initiation to financial sign-off.</li><li>Contract Owner of assigned projects and responsible for cost/budget control and schedule control.</li><li>Generating revenues from project variations and improve project margin.</li><li>Responsible for resolving all project constraints and resource management as required.</li><li>Responsible to achieve and improve the Project Schedule and successful financial closure on-time in meeting project objectives to its full specifications.</li><li>Responsible for timely procurement and maintaining the procurement tracker effectively.</li><li>Proper and timely coordination with vendor, supplier and subcontractors.</li><li>Responsible for project delivery in all aspects as per contract requirements by following Project management procedures and scope agreed.</li><li>Responsible for industrial standard and fault free installations.</li><li>Following high quality standards in project execution.</li><li>Responsible to maintain the project in positive cash flow at all the time.</li><li>Responsible for successful completion of the project, in meeting the project performance to its specifications and project contractual requirements and client obligations for the assigned projects.</li><li>Responsible to maintain the project documentation as per the standards.</li><li>Responsible to manage the project cash flow positively.</li><li>Preparation &amp; Submission of project documents like Project presentation reports, Resource Plan, Invoice plan, Commercial register etc, Preparation of Weekly, monthly report.</li><li>Preparation of required PPT for project execution with required bar charts.</li><li>Responsible for invoice claims on time, client approvals &amp; payment realization as per the terms, Receivable follow-up with client and all relevant parties within the team for the assigned projects.</li><li>Ensure the client satisfaction throughout the project phase.</li><li>Proper coordination with support team like Admin, Account &amp; finance, logistics for project requirements.</li><li>Verifying and certifying the subcontractor &amp; supplier invoices timely.</li><li>Managing operations without bad debts and LD clause applied as per budget allowed.</li><li>High QHSE standards and meeting the set targets, Adhere to all set policies and standards.</li><li>Responsible for the Contractual Performance of the assigned projects in all aspects.</li></ul><p>Deliverables</p><ul><li>Successful Project completion &amp; handover, within budget and time, and with effective utilization of resources.</li><li>Highest Q.HSE Records with high rankings on project audit and customer feedback reports.</li><li>High rankings on project Quality audit and customer feedback reports.</li><li>Effective communication and reporting.</li><li>Maintain Positive Project cash flow.</li><li>System performance to its specifications and project requirements.</li><li>Generating revenues and improving the project margins.</li><li>Timely invoicing and payment collection</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT</li><li>Experience - Engineering Graduate with minimum 8-10 years of relevant experience in managing major turnkey EPC security projects.</li><li>Preferred Experience of 4-5 years in Middle East region &amp; having valid Oman driving license.</li><li>2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as Project Engineer position.</li><li>Each project must be minimum value of 5m US$.</li><li>Integrated Security package (duration not less than 1 year).</li><li>The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc.</li><li>In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Communicate service needs to chefs and stewards throughout functions. Total charges for group functions, and prepare and present checks to group contacts for payment. Ensure banquet rooms, restaurants, and coffee breaks are ready for service. Ensure proper centerpieces are displayed on every table. Inspect the cleanliness and presentation of all china, glass, and silver prior to use. Check in with guests to ensure satisfaction. Set tables according to type of event and service standards. Communicate additional meal requirements, allergies, dietary needs, and special requests to the kitchen. Maintain cleanliness of work areas throughout the day.</p> <p>Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> At least 2 years of related work experience.</p> <p><strong>Supervisory experience:</strong> At least 1 year of supervisory experience.</p> <p><strong>License or certification:</strong> None.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Aloft, we aren’t your typical hotel—but we aren’t too cool for school either. We’re here to be our guests’ launching and landing pad. Whether they are taking their dog for a walk and coming back for a drink, wrapping up a day of meetings with coworkers, or they’re in town to see family, friends, or their favorite band, we offer a hub for connection to others and the area around them, with modern design and personality to boot. We’re looking for confident self-expressers who aren’t afraid to draw outside the lines. If you are someone who gets excited about the possibilities to connect with others, then Aloft Hotels is the place for you. In joining Aloft Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Communicate service needs to chefs and stewards throughout functions. Total charges for group functions, and prepare and present checks to group contacts for payment. Ensure banquet rooms, restaurants, and coffee breaks are ready for service. Ensure proper centerpieces are displayed on every table. Inspect the cleanliness and presentation of all china, glass, and silver prior to use. Check in with guests to ensure satisfaction. Set tables according to type of event and service standards. Communicate additional meal requirements, allergies, dietary needs, and special requests to the kitchen. Maintain cleanliness of work areas throughout the day. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: high school diploma or G.E.D. equivalent. Related Work Experience: At least 2 years of related work experience. Supervisory Experience: At least 1 year of supervisory experience. License or Certification: None</p><p></p></section>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Supervisor is responsible for coordinating, supervising, and executing all telecom-related pre-commissioning and commissioning activities for a large industrial energy project. The role ensures that telecom systems are installed, tested, integrated, and commissioned in accordance with project specifications, safety standards, and contractual requirements in preparation for start-up and handover to operations.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Supervise all telecom pre-commissioning and commissioning activities, including system installation checks, functional testing, loop checks, and final integration.</li> <li>Ensure telecom systems are ready for energization, start-up, and operational handover.</li> <li>Coordinate telecom activities with commissioning teams, construction, instrumentation, electrical, and control systems disciplines.</li> <li>Validate readiness of telecom systems including documentation, punch lists, and mechanical completion dossiers.</li> </ul> <p><strong>Telecom systems scope</strong></p> <ul> <li>Supervise and commission a wide range of telecom and communication systems, including but not limited to:</li> <li>Fiber optic networks (FOC, ODF, splicing, OTDR testing)</li> <li>Data and voice communication systems</li> <li>Public Address & General Alarm (PAGA) systems</li> <li>Access control and CCTV systems</li> <li>Radio communication systems (VHF/UHF/TETRA)</li> <li>Telephone and intercom systems</li> <li>Telecom cabinets, racks, and field devices</li> <li>Network switches and servers (where applicable)</li> </ul> <p><strong>Testing & documentation</strong></p> <ul> <li>Review and approve method statements, test procedures, and commissioning check sheets.</li> <li>Execute and witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning tests.</li> <li>Ensure proper recording of test results, red-line drawings, and as-built documentation.</li> <li>Manage punch lists, ensure timely close-out, and support system handover to operations.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Enforce strict compliance with HSE rules, permit-to-work systems, and site safety procedures.</li> <li>Conduct toolbox talks and ensure safe execution of all telecom commissioning activities.</li> <li>Ensure telecom installations meet relevant international standards and project specifications.</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise subcontractors, vendors, and technicians involved in telecom commissioning.</li> <li>Coordinate with engineering, construction, QA/QC, and operations teams.</li> <li>Report progress, constraints, and risks to the Commissioning Manager or Discipline Lead.</li> <li>Participate in commissioning meetings, system readiness reviews, and handover sessions.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or Bachelor’s Degree in Telecommunications Engineering, Electrical Engineering, Electronics Engineering, or a related discipline.</li> <li>Minimum 8–12 years of experience in telecom systems within oil & gas, LNG, petrochemical, or large industrial projects.</li> <li>At least 3–5 years in a supervisory role focused on pre-commissioning and commissioning activities.</li> <li>Proven experience working on major EPC projects during the commissioning phase.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Supervisor is responsible for coordinating, supervising, and executing all telecom-related pre-commissioning and commissioning activities for a large industrial energy project. The role ensures that telecom systems are installed, tested, integrated, and commissioned in accordance with project specifications, safety standards, and contractual requirements in preparation for start-up and handover to operations.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Supervise all telecom pre-commissioning and commissioning activities, including system installation checks, functional testing, loop checks, and final integration.</li> <li>Ensure telecom systems are ready for energization, start-up, and operational handover.</li> <li>Coordinate telecom activities with commissioning teams, construction, instrumentation, electrical, and control systems disciplines.</li> <li>Validate readiness of telecom systems including documentation, punch lists, and mechanical completion dossiers.</li> </ul> <p><strong>Telecom systems scope</strong></p> <ul> <li>Supervise and commission a wide range of telecom and communication systems, including but not limited to:</li> <li>Fiber optic networks (FOC, ODF, splicing, OTDR testing)</li> <li>Data and voice communication systems</li> <li>Public Address & General Alarm (PAGA) systems</li> <li>Access control and CCTV systems</li> <li>Radio communication systems (VHF/UHF/TETRA)</li> <li>Telephone and intercom systems</li> <li>Telecom cabinets, racks, and field devices</li> <li>Network switches and servers (where applicable)</li> </ul> <p><strong>Testing & documentation</strong></p> <ul> <li>Review and approve method statements, test procedures, and commissioning check sheets.</li> <li>Execute and witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning tests.</li> <li>Ensure proper recording of test results, red-line drawings, and as-built documentation.</li> <li>Manage punch lists, ensure timely close-out, and support system handover to operations.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Enforce strict compliance with HSE rules, permit-to-work systems, and site safety procedures.</li> <li>Conduct toolbox talks and ensure safe execution of all telecom commissioning activities.</li> <li>Ensure telecom installations meet relevant international standards and project specifications.</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise subcontractors, vendors, and technicians involved in telecom commissioning.</li> <li>Coordinate with engineering, construction, QA/QC, and operations teams.</li> <li>Report progress, constraints, and risks to the Commissioning Manager or Discipline Lead.</li> <li>Participate in commissioning meetings, system readiness reviews, and handover sessions.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or Bachelor’s Degree in Telecommunications Engineering, Electrical Engineering, Electronics Engineering, or a related discipline.</li> <li>Minimum 8–12 years of experience in telecom systems within oil & gas, LNG, petrochemical, or large industrial projects.</li> <li>At least 3–5 years in a supervisory role focused on pre-commissioning and commissioning activities.</li> <li>Proven experience working on major EPC projects during the commissioning phase.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office.<br> Position is based in Musandam, Oman for a long-term assignment.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>The Lead QAQC Engineer will be responsible:</p><br><ul> <li>Contribute to Implementation of QA/QC systems, processes and activities as defined in the OQ Project Quality Management Plan.</li> <li>Familiarize with Scope of Work, FEED &amp; Contract requirements, OQ and PMC specifications as applicable to QA/QC.</li> <li>Maintain Project Quality Management System reflecting requirements of OQ specifications, standards, procedures and current best practices, for all project activities.</li> <li>Develop, implement, update the project quality plan as applicable.</li> <li>Provide QA/QC inputs as applicable to project deliverables and decisions.</li> <li>Review and approve Contractor Quality Plans, Programs, Project Quality Documents and Coordination Procedures. Prepare quality assurance procedures.</li> <li>Overview implementation of Project QA/QC plan focusing on the key requirements of OQ Project quality specifications.</li> <li>Plan and implement owner reviews of Contactor and Vendor QA/QC documents and Inspection &amp; testing procedures in line with document distribution matrix. Timely review and approval of QA QC Deliverables i.e. Material Requisitions, Technical Bid Evaluation, EPC Contractor/Subcontractor/ supplier/manufacturer documents, Inspection reports, Welding and NDT procedures, Inspection Test Plans, Quality Control Procedures.</li> <li>Communicate, clarify, align, and set methodologies and procedures for inspection and testing process, between the Vendor, EPC Contractor, TPI and OQ.</li> <li>Engage Third Party Inspection agency (TPI - Local and overseas) and Management of Inspections and Testing using TPI and own Inspectors</li> <li>Monitor Inspection and Quality Control efforts of the EPC Contractor. Participate in Inspection and Testing process as required by the approved QCP/ITP</li> <li>Establish and Participate in Pre-Inspection Meetings for CR I and CR II Equipment and Materials.</li> <li>Develop audit plan and ensure audits are conducted on EPC Contractors and their respective subcontractors or Vendors, for adherence to contract requirements, quality requirements and procedures.</li> <li>Conduct /participate in Project Quality Audits (Internal and External)</li> <li>Review of audit findings, and timely implementation of corrective actions.</li> <li>Implement Non-Conformance and Corrective action systems.</li> <li>In consultation with Project Manager, monitor Project Quality performance to ensure all Project Quality deliverables are accomplished and Quality KPIs are achieved.</li> <li>Monitoring the quality performance of the Contractors.</li> <li>Prepare and present QAQC Reports as required.</li> <li>Monitor Contractors RFT program</li> <li>Monitor Lessons Learned implementation</li> <li>Ensuring that activities carried out by the EPC Contractor are conducted in compliance to their Quality plan, procedures, method statement and Company requirements.</li> <li>Ensuring competent resources are available within the respective QA/QC organization of the EPC Contractors</li> <li>Lead a Team of QA QC engineers/inspectors to complete project inspection tasks.</li> <li>Promote Awareness of the Project Quality Management System.</li> <li>Monitor the process of design and compiling of Project records</li> <li>Review of Manufacturer Data Books / Inspection Record Book/ Project Quality Records</li></ul><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> &nbsp;<strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li><strong>Workmen’s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li><strong>Employee Assistance Programme:&nbsp;</strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Experience:</strong></p><br><ul> <li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li> <li>Certified Lead Auditor to any of the Management Systems – ISO 9001 / ISO 14001 / OHSAS 18001.</li> <li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li></ul><p><strong>Minimum Experience:</strong></p><br><ul> <li>Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry. Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry. Inspection and testing experience at manufacturing units and Construction sites required. Multidiscipline Quality Control experience is preferred. Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.&nbsp;</li> <li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment. Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li> <li>Good Knowledge in the application of industry codes and standards</li></ul> </div>