وظائف سائقين كلارك في سلطنة عمان

<p><strong>Key Responsibilities</strong></p><ul><li><p>Perform preventive and corrective maintenance on forklifts and material-handling equipment.</p></li><li><p>Diagnose and repair mechanical, hydraulic, electrical, and electronic faults in Forklifts.</p></li><li><p>Conduct routine inspections and identify safety-critical defects.</p></li><li><p>Troubleshoot forklift breakdowns and restore equipment to safe operating condition with minimum downtime.</p></li><li><p>Maintain and repair mast, lifting, steering, braking, transmission, drive, hydraulic, and electrical systems.</p></li><li><p>Carry out battery, charging-system, engine, fuel, and cooling-system maintenance as applicable to the equipment type.</p></li><li><p>Use diagnostic tools, test equipment, service manuals, and technical schematics to identify faults.</p></li><li><p>Perform functional and safety checks after completing repairs.</p></li><li><p>Maintain accurate records of inspections, repairs, spare parts, and preventive maintenance activities.</p></li><li><p>Follow all company HSE, maintenance, and equipment safety procedures.</p></li></ul><p><strong>Essential Qualifications & Experience</strong></p><ul><li><p>Technical diploma/certificate in Mechanical, Automotive, Electrical, Heavy Equipment, or a related technical field.</p></li><li><p>Minimum <strong>3–5 years of relevant experience</strong> as a Forklift Technician, Material Handling Equipment Technician, Heavy Equipment Technician, or similar role.</p></li><li><p>Hands-on experience with <strong>electric and/or internal-combustion forklifts</strong>.</p></li><li><p>Strong knowledge of <strong>mechanical, hydraulic, electrical, and electronic systems</strong>.</p></li><li><p>Proven ability to diagnose faults and perform repairs independently.</p></li><li><p>Ability to read and understand <strong>hydraulic and electrical schematics</strong>.</p></li><li><p>Experience using mechanical, electrical, hydraulic, and diagnostic tools.</p></li><li><p>Good knowledge of preventive maintenance practices.</p></li><li><p>Strong understanding of equipment safety and safe maintenance procedures.</p></li><li><p>Experience with major forklift brands/OEM equipment is an advantage.</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Good mechanical and technical aptitude.</p></li><li><p>Safety-focused approach to all maintenance activities.</p></li><li><p>Ability to work independently and as part of a maintenance team.</p></li><li><p>Good attention to detail and quality of workmanship.</p></li><li><p>Ability to work under pressure and respond to equipment breakdowns.</p></li><li><p>Good communication and reporting skills.</p></li><li><p>Reliable, disciplined, and service-oriented.</p></li><li><p>Willingness to work shifts, overtime, or emergency breakdown support when required.</p></li></ul><p><strong>Preferred / Advantageous</strong></p><ul><li><p>OEM/manufacturer training or certification in forklift maintenance.</p></li><li><p>Experience with Toyota, Hyster-Yale, Linde, Jungheinrich, Mitsubishi, Crown, CAT, Komatsu, or other major forklift brands.</p></li><li><p>Experience with modern electric forklifts, electronic control systems, and diagnostic software.</p></li><li><p>Previous experience in warehouse, logistics, manufacturing, port, or industrial environments.</p></li><li><p>Valid driving license, where applicable.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>A hands-on, safety-focused Forklift Technician with 3–5 years of practical experience, strong mechanical/hydraulic/electrical troubleshooting skills, and proven ability to independently maintain, diagnose, and repair electric and/or IC forklifts while minimizing equipment downtime.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211667&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Artificial Lift&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>URGENT HIRING MARBLE QUARRY &amp; MARBLE FACTORY , SULTANATE OF OMAN</p><p>Wheel Loader Operator - QTY 20 -TOTAL SALARY - 170 OMR ( FRESHER ) - 180 OMR ( GCC LICENSE)</p><p>Excavator Operator - QTY 20 -TOTAL SALARY - 170 OMR ( FRESHER ) - 180 OMR ( GCC LICENSE)</p><p>Tipper/ Dumper Operator - QTY 20 -TOTAL SALARY - 170 OMR ( FRESHER ) - 180 OMR ( GCC LICENSE)</p><p>Forklift Operator - QTY 20 -TOTAL SALARY - 170 OMR ( FRESHER ) - 180 OMR ( GCC LICENSE)</p><p>Marble Cutting Machine Operator - QTY 22 -TOTAL SALARY - 140 OMR.</p><p>Marble Slab Polising Machine Operator - QTY 22 -TOTAL SALARY - 140 OMR .</p><p>Marble Drilling Machine Operator - QTY 22 -TOTAL SALARY - 140 OMR .</p><p>Skilled Helper - QTY 40 -TOTAL SALARY - 120 OMR .</p><p>Terms &amp; Conditions: -Contract: 2 Years -Duty Hours: 10 Hours REF/ACS/XXXV35/MUM Please send candidates CVs with complete documents to EMAIL_ADDRESS</p><p><strong>Desired Candidate Profile</strong></p><p>Experience : Fresher</p>

<p>As part of the operation logistics, being responsible to conduct operations of the forklift as per the safety standards set by the organization.</p> <p> <b> Key Deliverables:</b> </p> <ul> <li>Attend the HSE safety meeting with the supervisors. </li> <li>Conduct daily maintenance check for the forklift. </li> <li>Follow safety protocol and procedures before operating the forklift. </li> <li>Receive the daily tasks from the supervisor. </li> <li>Ensure drums are aligned while storing. </li> <li>Support stores with any uploading or downloading of drums whenever </li> <li>required. </li> </ul> <br> <p> <b> Job Profile: </b> </p> <p> <b> Qualifications:</b> </p> <ul> <li>Secondary School. </li> <li>Licensed forklift operator. </li> </ul> <br> <p> <b> Skills/Knowledge:</b> </p> <ul> <li>Good Physical fitness. </li> </ul> <br> <p> <b> Experience </b>: </p> <ul> <li>2 years experience as a forklift driver. </li> </ul> <p> </p> <p> </p><p><strong>Desired Candidate Profile</strong></p><p><br></p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As part of the operation logistics, being&nbsp;responsible to conduct operations of the forklift as per the safety standards set by the organization.</p><br><p><b><u>Key Deliverables</u>:</b>&nbsp;</p><br><ul><li>Attend the HSE safety meeting with the supervisors. &nbsp;&nbsp;</li><li>Conduct daily maintenance check for the forklift. &nbsp;&nbsp;</li><li>Follow safety protocol and procedures before operating the forklift. &nbsp;&nbsp;</li><li>Receive the daily tasks from the supervisor.&nbsp;</li><li>Ensure drums are aligned while storing. &nbsp;&nbsp;</li><li>Support stores with any uploading or downloading of drums whenever&nbsp;</li><li>required.&nbsp;</li></ul><br><p><b><u>Job Profile:</u></b></p><br><p><b><u>Qualifications</u>:</b>&nbsp;</p><br><ul><li>Secondary School.&nbsp;&nbsp;</li><li>Licensed forklift operator.&nbsp;&nbsp;</li></ul><br><p><b><u>Skills/Knowledge</u>:</b>&nbsp;</p><br><ul><li>Good Physical fitness. &nbsp;&nbsp;</li></ul><br><p><b><u>Experience</u></b>: &nbsp;&nbsp;</p><br><ul><li>2 years’ experience as a forklift driver.&nbsp;</li></ul><p><i><span>Prysmian , as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&amp;I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. </span></i></p><br><p><br><i><span>All Managers and HRs in Prysmian are responsible for ensuring DE&amp;I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business.</span></i></p><br><p><i>Visit our DE&amp;I Page to</i><i> learn more about Prysmian's commitments.</i></p><br><p>Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please let us know.</p><br> </div>

<ul><li><p>Operate forklifts and related material-handling equipment to load, unload, and move products within the warehouse and yard</p></li><li><p>Safely transport building materials, power tools, hand tools, construction materials, hardware, and industrial items to designated locations</p></li><li><p>Inspect forklift and related equipment daily to ensure safe functioning and report any issues or maintenance needs</p></li><li><p>Stack and organize products and materials in a safe and accessible manner</p></li><li><p>Assist in inventory management by recording and updating movement and storage of goods</p></li><li><p>Follow all safety protocols and company procedures for material handling involving heavy, bulky, or hazardous items</p></li><li><p>Collaborate with warehouse supervisors and logistics team to fulfill order requirements and ensure timely delivery/dispatch</p></li><li><p>Maintain cleanliness and orderliness in the warehouse and material movement areas</p></li><li><p>Support loading/unloading operations during inbound and outbound shipments</p></li><li><p>Participate in periodic training and development sessions for equipment and warehouse safety</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Omani Nationality (Mandatory, in line with Omanization policy)</p></li><li><p>Secondary school education or equivalent</p></li><li><p>Minimum 1-2 years of experience in a similar role, preferably within trading or construction materials sector</p></li><li><p>Valid Oman Forklift Operator License (Required)</p></li><li><p>Basic proficiency in reading, writing, and understanding English and/or Arabic</p></li></ul><br><p><strong>Skills & Competencies:</strong></p><ul><li><p>Good knowledge of safe lifting and material handling practices</p></li><li><p>Familiarity with the storage and transport of building materials, power tools, hand tools, and industrial items</p></li><li><p>Attention to detail and ability to follow instructions</p></li><li><p>Team player with positive attitude and strong work ethic</p></li><li><p>Basic numeracy and record-keeping skills</p></li><li><p>Ability to work under pressure and meet deadlines</p></li><li><p>Physical stamina for manual tasks and lifting (as required by the job)</p></li><li><p>Good communication and interpersonal skills</p></li></ul>

<p>CHEMICAL WAREHOUSE SUPERVISOR</p><p>Diploma or Bachelor's degree in Chemical Engineering, Chemistry, Logistics, Warehouse Management, or a related discipline.</p><p>Relevant experience in chemical manufacturing, chemical distribution, blending, or hazardous-material</p><p>warehousing.</p><p>Minimum 5-8 years of warehouse experience, preferably with supervisory responsibility.</p><p>➤ Experience handling drums, IBCs, bulk chemicals, and chemical tankers.</p><p>➤ Forklift/material-handling knowledge is essential.</p><p>Racking System</p><p>Chemical compatibility study.</p>

<p> <strong>Role &amp; responsibilities</strong> </p> <br> <p>MACHINE SKILLED OPERATOR</p> <br> <p> </p> <p> <strong>Skilled Machine Operator EPS Block Production &amp; Contour Cutting </strong> </p> <br> <p>The operator will be responsible for the EPS production section, including:</p> <ul> <li>EPS pre-expansion and density control.</li> <li>EPS silos and material management.</li> <li>EPS block moulding.</li> <li>EPS waste grinding and virgin/recycled material mixing.</li> <li>CNC/CAD-CAM contour cutting of EPS blocks.</li> <li>Monitoring steam, water and compressed-air systems associated with production.</li> <li>Machine setup, parameter adjustment, quality monitoring, troubleshooting and routine maintenance.</li> <li>Reading technical drawings and optimizing EPS cutting to minimize waste.</li> </ul> <p> <strong>Skilled Machine Operator Wire Mesh &amp; Panel Production </strong> </p> <br> <p>The operator will be responsible for the wire mesh and final panel production section, including:</p> <ul> <li>Automatic welded wire mesh production.</li> <li>Wire straightening and cutting.</li> <li>Wire butt welding.</li> <li>Operation of the main automated CIPS panel production machine.</li> <li>CNC mesh cutting and bending.</li> <li>Manual welding/rework where required.</li> <li>Machine setup, parameter adjustment, quality monitoring, troubleshooting and routine maintenance.</li> <li>Reading technical drawings and checking dimensional/product quality.</li> </ul> <br> <p>Must Know Below Work:</p> <br> <p>1. EPS Pre-Expander</p> <p>2. EPS Block Moulder Machine</p> <p>3. Pantograph (EPS Cutting Machine)</p> <p>4. Wire Straightener with Cutting Bench</p> <p>5. Wire Mesh Welding Machine</p> <p>6. Cutting &amp; Bending Mesh Machine</p> <p>7. Manual Bench Welder</p> <p>8. Forklift</p> <br> <ul> <li> </li> </ul> <p>He deals with loading / unloading and the operation of the machine, he monitors the process and verify the final product.</p> <ul> <li> </li> </ul> <p>He reads and interprets the technical information on production to be made, identifies the proper work cycle, equips the machine to achieve the expected result.</p> <ul> <li> </li> </ul> <p>He intervenes to handle processing and make appropriate adjustments according to the procedures learned during training.</p> <ul> <li> </li> </ul> <p>He carries out routine and extraordinary maintenance.</p> <ul> <li> </li> </ul> <p>He is able to use the computer to manage the necessary information for the implementation of his own activity (changing the processing parameters and reading the processing data).</p> <ul> <li> </li> </ul> <p>He monitors the objectives of his own work in terms of volume, time and quality</p> <br> <br> <p> <strong>Must Know Below Work:</strong> </p> <br> <p>1. EPS Pre-Expander</p> <p>2. EPS Block Moulder Machine</p> <p>3. Pantograph (EPS Cutting Machine)</p> <p>4. Wire Straightener with Cutting Bench</p> <p>5. Wire Mesh Welding Machine</p> <p>6. Cutting &amp; Bending Mesh Machine</p> <p>7. Manual Bench Welder</p> <p>8. Forklift</p> <br> <br> <p>He deals with loading / unloading and the operation of the machine, he monitors the</p> <p>process and verify the final product.</p> <ul> <li> He reads and interprets the technical drawings of the product to be made, identifies the</li> </ul> <p>relative working cycle, equips the machine to obtain the expected result (in relation with the</p> <p>Technical Office)</p> <ul> <li> He must take care of cut optimization of EPS blocks, limiting as much as possible the</li> </ul> <p>accumulation of scrapes.</p> <ul> <li> He intervenes to handle processing and make appropriate adjustments according to the</li> </ul> <p>procedures learned during training.</p> <ul> <li> He carries out routine and extraordinary maintenance.</li> <li> He is able to use the computer to manage the necessary information for the</li> </ul> <p>implementation of his own activity (changing the processing parameters and reading the</p> <p>processing data).</p> <ul> <li> He is able to use the measuring instruments for the planned quality control procedures.</li> <li> He monitors the objectives of his own work in terms of volume, time and quality.</li> <li>CONTOUR CUTTING MACHINE SKILLED OPERATOR</li> <li> </li> <li>He deals with loading / unloading and the operation of the machine, he monitors the process and verify the final product.</li> <li> </li> <li>He reads and interprets the technical drawings of the product to be made, identifies the relative working cycle, equips the machine to obtain the expected result (in relation with the Technical Office)</li> <li> </li> <li>He must take care of cut optimization of EPS blocks, limiting as much as possible the accumulation of scrapes.</li> <li> </li> <li>He intervenes to handle processing and make appropriate adjustments according to the procedures learned during training.</li> <li> </li> <li>He carries out routine and extraordinary maintenance.</li> <li> </li> <li>He is able to use the computer to manage the necessary information for the implementation of his own activity (changing the processing parameters and reading the processing data).</li> <li> </li> <li>He is able to use the measuring instruments for the planned quality control procedures.</li> <li> </li> <li>He monitors the objectives of his own work in terms of volume, time and quality.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Preferred candidate profile</strong> </p> <br> <p> <strong>Technical diploma or equivalent qualifications</strong> </p> <br> <p> For both positions, candidates should preferably have a <strong>Technical Diploma/ITI or equivalent technical qualification</strong> and hands-on experience with <strong>industrial/manufacturing machinery</strong>. Experience with EPS/foam processing, CNC/hot-wire cutting, automated production lines, wire mesh/welding machinery, panel production, or similar equipment would be an advantage. The operators will be supported by helpers and a forklift/logistics operator. </p>

<p>Dear Candidates, Greetings from AMExemplar Services !!! We have openings for our prestigious client in Oman; they have openings for Factory Incharge Oman Location PLEASE NOTE:- 1) CANDIDATES MUST HAVE EXP AS PER BELOW JOB DESCRIPTION. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years experience as per below job description &amp; post applied:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of birth:- Age:- Below is the open positions: - A) Factory Incharge</p><p><strong>Desired Candidate Profile</strong></p>1) Degree / Diploma in Engineering. 2) Candidates must have experience in below a) EPS Pre-Expander b) EPS Block Moulder Machine c) Pantograph (EPS Cutting Machine) d) Wire Straightener with Cutting Bench e) Wire Mesh Welding Machine f) Cutting &amp; Bending Mesh Machine g) Manual Bench Welder h) Forklift 3) The factory in-charge plans, controls and coordinates the production activity in a logical of optimization of the resources (human, economic, technological). 4) His role of mediation and recombination of human resource skills is crucial to organize work schedules and shifts. He must be able to predict and then direct organizational strategies and control on the production management and logistics of orders (orders, schedules and plans of scheduled deliveries). He must have complete vision of plant s potential and is the connecting point of the various departments (synergy between Commercial Department and Production Area). 5) Plan and carry out production steps based on the requirements of the Commercial Department, organizing times and methods of production; 6) Monitor and manage the level of inventories of raw materials; 7) Check the operating status of machinery and equipment; 8) Supervise the performance of operators, machines and departments constantly and in a documented manner in order to make changes where and if necessary.

<p>A hands-on professional responsible for directly supervising and controlling all lifting and rigging operations on site to ensure safe and efficient execution.</p><p><b>Responsibilities</b></p><ul><li>Supervise all lifting operations on site in accordance with approved lifting plans.</li><li>Conduct pre-lift checks on cranes, rigging equipment, and accessories.</li><li>Ensure all lifting gear is inspected, certified, and fit for use.</li><li>Brief crane operators, riggers, and banksmen before each lift.</li><li>Control exclusion zones and ensure unauthorized personnel are kept clear.</li><li>Communicate with crane operators using standard hand signals or radio.</li><li>Monitor ground conditions, weather, and environmental factors during lifts.</li><li>Stop lifting operations immediately if unsafe conditions are observed.</li><li>Ensure correct rigging configurations and load attachment methods are used.</li><li>Maintain daily lifting logs and inspection checklists.</li><li>Report incidents, near-misses, and equipment defects to the Lifting Engineer and HSE team.</li><li>Coordinate with other site supervisors to plan and sequence lifts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Age limit 24-50</p><p>Need Gulf Experience</p>

<ul><li><p>Operate assigned equipment (excavator, loader, forklift, crane, grader, etc.) safely and efficiently as per site and client requirements.</p><ol><li><p>Conduct pre-start and post-operation inspections of equipment, ensuring safe operating condition and reporting defects immediately.</p></li><li><p>Follow all HSE policies, Golden Rules, and Client Equipment Operation Guidelines during equipment use.</p></li><li><p>Assist in loading, unloading, lifting, and transporting materials in compliance with load handling and lifting standards.</p></li><li><p>Perform basic troubleshooting and first-line maintenance such as checking fuel, oil, hydraulics, cooling systems, brakes, and tires.</p></li><li><p>Adhere to Journey Management and Permit-to-Work (PTW) systems, ensuring operations are authorized and risk assessed.</p></li><li><p>Maintain accurate operation logs and usage records, reporting any incidents, near misses, or unsafe conditions.</p></li><li><p>Ensure equipment is kept clean and in proper working condition at all times.</p></li><li><p>Demonstrate awareness of desert/off-road operation procedures and towing/recovery guidelines in case of stuck or breakdown situations.</p></li><li><p>Follow supervisor’s instructions and complete tasks on time without operational or industrial wastage.</p></li><li><p>Follow the instructions of the supervisor and ensure timely completion of assigned tasks without causing industrial or operational wastage.</p></li><li><p>Any additional responsibilities as instructed by immediate supervisor or management.</p></li></ol></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Valid Oman Driving License (minimum 5 years old)</p></li><li><p>Valid OPAL Lifting Certificate</p></li><li><p>Valid RTITB Competent Card for the relevant equipment category</p></li><li><p>School Education with English writing and reading ability</p></li><li><p>Valid Omani Equipment Operator License for relevant category</p></li><li><p>Experience in O&G industry and knowledge of Defensive Driving will be added advantage</p></li><li><p>Knowledge of basic mechanical troubleshooting of heavy equipment.</p></li><li><p>Familiarity with lifting guidelines, load charts, and equipment safety protocols</p></li></ol><p><br></p>

<p>A professional responsible for planning, supervising, and ensuring the safety and quality of all lifting and rigging operations on site.</p><p>Develop and review Lifting Plans and Rigging Studies for critical and non-critical lifts</p><p>Classify lifts (routine, complex, critical) and ensure appropriate controls are in place</p><p>Inspect and certify lifting equipment and accessories (cranes, slings, shackles, hooks, spreader bars)</p><p>Ensure compliance with applicable standards such as ASME B30, LEEA, BS 7121, and LOLER</p><p>Conduct pre-lift meetings and toolbox talks with crane operators and riggers</p><p>Verify crane load charts, ground bearing capacity, and outrigger pad calculations.</p><p>Monitor all lifting operations and intervene when unsafe conditions are observed.</p><p>Maintain lifting equipment registers, inspection records, and certification logs.</p><p>Review third-party inspection certificates for lifting gear and cranes.</p><p>Coordinate with HSE, civil, and construction teams during lift execution.</p><p>Investigate lifting-related incidents and near-misses and prepare reports.</p><p>Compile and maintain lifting documentation and final records.</p><p><strong>Desired Candidate Profile</strong></p><p>Age limit 24-50</p><p>Need Gulf Experience</p>

<p><b>Definition:</b></p> <p> </p> <p>Ensure that factory facilities, machinery, equipment and services are maintained in good working condition to support efficient and uninterrupted production. Responsible for preventive maintenance, breakdown repairs, equipment improvement, maintenance planning, technician supervision and workplace safety.</p> <p> </p> <p>Overall Purpose of the Role:</p> <p> </p> <p>Install, maintain, improve and repair equipment, plant, services and building installations to set levels effectively in compliance with best practices ensuring production efficiency can be met within a safe well-presented facility. Respond to technical issues affecting production and maintain electrical and mechanical services through Planned Preventative Maintenance (PPM). Responsible for multiple highly complex major projects requiring innovative original solutions where results are key to successful completion of major projects. Work mostly independently with minimal supervision and work is reviewed at project milestones and/or on completion by Senior Management.</p> <p> </p> <p> </p> <p>Reporting To:</p> <p> </p> <p>Production Manager</p> <p> </p> <p> </p> <p><b>Key Responsibilities:</b></p> <p> </p> <p>1. GENERAL AND TASK MANAGEMENT</p> <p> </p> <p> Attend breakdowns, identify fault and problem solving with minimal downtime to production</p> <p> Carry out diagnosis of faults, the maintenance and repairs to all types of plant and equipment in a safe, timely and professional manner and return equipment to operational service</p> <p> Estimate length of time required to complete a job and likely consequences of failure to complete work within required timescales</p> <p> Identify and escalate any activity that has the potential to cause harm or damage</p> <p> Report breakdown root causes, equipment faults and concerns to management</p> <p> Ensure all work is undertaken to a high-quality standard and adheres to all quality standard regulations</p> <p> Ensure company targets are met in respect of quality of parts produced</p> <p> Identify spares requirements and log usage</p> <p> Assist in the development of planned preventative maintenance (PPM)</p> <p> schedules</p> <p> Carry out PPM schedules as necessary and planned work orders as required and provide feedback to develop the system</p> <p> Assist with the moving, installation, repositioning of machines and equipment</p> <p> Make full use of the computerized maintenance management[w1.1] system and the asset management module in the ERP.</p> <p> Plan the workload to support production and ensure efficient use of working time</p> <p> Fill in job tickets/log completion of work on the computerized maintenance management system and the asset management module in the ERP.</p> <p> Operate Forklift Truck and lifting equipment</p> <p> Work within 5S (Sort, Set in Order, Shine, Standardize, Sustain)</p> <p> methodology to maintain workplace to a high standard</p> <p> Ensure all personal protective equipment is identified, always available, correctly used and all associated problems are reported to management</p> <p> Ensure all lost time, minor and trivial accidents are reported</p> <p> Promote environmental issues and ensure all company procedures are understood and followed</p> <p> Ensure a safe working environment exists for self and colleagues, ensuring all health, safety environmental and quality management procedures are followed and achieve the company s and departmental KPI targets</p> <p> Keep up with current and developing manufacturing and engineering trends regarding maintenance</p> <p> The adherence to the Total Productive Maintenance philosophy under the Lean Manufacturing and undertake[w2.1] other special projects as required.</p> <p> Quality control of work by appropriate reviews</p> <p> Conduct benchmarking studies to determine best practices/designs and future trends</p> <p> Plan projects or subtasks so they may be tracked and presented</p> <p> Actively utilize continuous improvement methodology to progress the maintenance function</p> <p> Write reports and present progress at project meetings</p> <p> Achieve goals within budget</p> <p> Undertake continuous training and development</p> <p> Perform root cause analysis and resolve problems</p> <p> Independently determine approach and assigned tasks</p> <p> Understand and operate within basic cost/budget measures</p> <p> Execute special tool calibration programs jointly with third parties.</p> <p> Build a specific JIG and Fixture maintenance program as part of the role (they will not have such programs as the Standard Equipment delivered by the OEM-s)</p> <p> </p> <p> </p> <p> </p> <p>2. PEOPLE MANAGEMENT</p> <p> </p> <p> Supervise maintenance technicians and support their daily work activities.</p> <p> Plan and allocate maintenance work based on production priorities.</p> <p> Monitor the completion and quality of maintenance tasks.</p> <p> Train, guide and mentor technicians, apprentices and less experienced team members.</p> <p> Identify training needs and support the development of multi-skilled technicians.</p> <p> Ensure maintenance team members follow company procedures, safety requirements and expected work standards.</p> <p> Communicate maintenance issues, work progress and equipment concerns to the Production Manager.</p> <p> </p> <p>3. RELATIONSHIP MANAGEMENT</p> <p> </p> <p> Coordinate with Production to plan maintenance activities and minimize disruption to manufacturing.</p> <p> Act as the first point of contact for production-related maintenance issues.</p> <p> Liaise with equipment suppliers, contractors and specialist engineers when required.</p> <p> Coordinate contractor activities in accordance with company procedures.</p> <p> Participate in maintenance and production meetings and report work progress.</p> <p> Support machine installation, equipment improvement and other factory maintenance projects.</p> <p> </p> <p> </p><p><strong>Desired Candidate Profile</strong></p><p>Technical Diploma/Engineering or equivalent qualification in Mechanical, Electrical or Maintenance Engineering.</p> <p>Minimum 10 years of experience in Automotive factory maintenance especially maintaining bus or truck CKD assembly plant.</p> <p>Problem solver with working knowledge &amp; completed projects using Six Sigma approach. </p> <p>Strong computer skills. Shall work on MS Office suite, ERP software.</p> <p>Knowledge of lean manufacturing techniques[w3.1] and recognized basic &amp; advanced QC tools with preferred experience.</p> <p>Knowledge of Health &amp; Safety legislation including ISO14001, ISO 45001 and responsibilities</p> <p>Knowledge of Quality standard ISO 9001</p> <p>Experience of working with facilities management and total productive maintenance.[w</p>

<p>A total of 7 years experience in Lifting and Rigging to include the Heavy Lift experience; 5 years previous Heavy Lift Experience in the position working in the Oil and Gas industry; At least 2 years experience creating Heavy complex drawings in AutoCAD; Responsible for lifting equipment selection, procurement and ensure all lifting equipment meets the required standards Ensure all documentation required for lifting and rigging has been processed and correct in order for the lifting and rigging to proceed; Produce Lifting and Rigging Method Statements, Plot Plans Rigging Studies, Heavy Lift and Critical Lift packs;</p><p><strong>Desired Candidate Profile</strong></p><p>Preferred engineering Degree or relevant experience subject to Shell Lifting Department Approval; Fluent in English Reading, Writing and Speaking (IELTS 8 equivalent);</p>

<p>Logistics Planning &amp; Coordination Develop logistics plans for material movement, module transportation, and project cargo shipments. Coordinate inbound and outbound logistics activities for fabrication projects. Plan transportation routes, lifting arrangements, and shipment schedules for oversized and heavy-lift cargo. Liaise with project teams, procurement, construction, and clients to ensure logistics requirements are met. Material Management Monitor receipt, storage, and dispatch of materials within the yard. Coordinate with warehouse and inventory teams for material availability. Ensure proper tracking and documentation of materials and project cargo. Manage logistics records and inventory movement reports. Heavy Lift &amp; Load-Out Operations Support planning and execution of module load-out activities. Coordinate transportation of fabricated modules from yard to jetty or project site. Review lifting studies, transport studies, and load-out procedures. Coordinate with marine contractors, transport agencies, and heavy-lift service providers. Shipping &amp; Customs Coordination Coordinate export/import documentation and customs clearance activities. Liaise with freight forwarders, shipping lines, customs authorities, and port operators. Ensure compliance with Oman customs regulations and project requirements. Track shipments and provide status updates to stakeholders. Vendor &amp; Contractor Management Coordinate logistics contractors, transporters, and freight forwarding agents. Monitor contractor performance, cost, and service quality. Verify logistics invoices and support cost control measures. HSE &amp; Compliance Ensure compliance with L&amp;T HSE standards and company procedures. Participate in risk assessments, toolbox talks, and logistics safety reviews. Ensure all transportation and lifting activities are executed safely. Support incident investigations and implementation of corrective actions. Reporting &amp; Documentation Prepare logistics progress reports and shipment status reports. Maintain records of transportation schedules, delivery notes, and customs documentation. Develop logistics dashboards and KPIs for management review.</p>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Logistics Planning &amp; Coordination<ul><li>Develop logistics plans for material movement, module transportation, and project cargo shipments.</li><li>Coordinate inbound and outbound logistics activities for fabrication projects.</li><li>Plan transportation routes, lifting arrangements, and shipment schedules for oversized and heavy-lift cargo.</li><li>Liaise with project teams, procurement, construction, and clients to ensure logistics requirements are met.</li></ul>Material Management<ul><li>Monitor receipt, storage, and dispatch of materials within the yard.</li><li>Coordinate with warehouse and inventory teams for material availability.</li><li>Ensure proper tracking and documentation of materials and project cargo.</li><li>Manage logistics records and inventory movement reports.</li></ul>Heavy Lift &amp; Load-Out Operations<ul><li>Support planning and execution of module load-out activities.</li><li>Coordinate transportation of fabricated modules from yard to jetty or project site.</li><li>Review lifting studies, transport studies, and load-out procedures.</li><li>Coordinate with marine contractors, transport agencies, and heavy-lift service providers.</li></ul>Shipping &amp; Customs Coordination<ul><li>Coordinate export/import documentation and customs clearance activities.</li><li>Liaise with freight forwarders, shipping lines, customs authorities, and port operators.</li><li>Ensure compliance with Oman customs regulations and project requirements.</li><li>Track shipments and provide status updates to stakeholders.</li></ul>Vendor &amp; Contractor Management<ul><li>Coordinate logistics contractors, transporters, and freight forwarding agents.</li><li>Monitor contractor performance, cost, and service quality.</li><li>Verify logistics invoices and support cost control measures.</li></ul>HSE &amp; Compliance<ul><li>Ensure compliance with L&amp;T HSE standards and company procedures.</li><li>Participate in risk assessments, toolbox talks, and logistics safety reviews.</li><li>Ensure all transportation and lifting activities are executed safely.</li><li>Support incident investigations and implementation of corrective actions.</li></ul>Reporting &amp; Documentation<ul><li>Prepare logistics progress reports and shipment status reports.</li><li>Maintain records of transportation schedules, delivery notes, and customs documentation.</li><li>Develop logistics dashboards and KPIs for management review.</li></ul><br> </div>

<p>POSITION SUMMARY Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster response protocols. Respond and attend to guest repair requests. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 2 years of related work experience. Supervisory Experience: At least 2 years of supervisory experience. License or Certification: None</p>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong><br></strong></p><p><strong>Main tasks and responsibilities</strong></p><p>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</p><p>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</p><p>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</p><p>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</p><p>Contribute to monthly production planning and reservoir-surveillance planning as required.</p><p>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</p><p>Participate in integrated field studies for maturing hydrocarbon resources.</p><p>Evaluate well and reservoir performance and recommend production-improvement opportunities.</p><p>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</p><p>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</p><p>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</p><p>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</p><p>Fulfil stand-by / on-call duties when required.</p><p>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</p><p><strong>Key interactions</strong></p><p>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</p><p>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</p><p><strong>Notable Working Conditions</strong>. Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Excellent knowledge of written, read, and spoken English (required).</li><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</li><li>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</li><li>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</li><li>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</li><li>Contribute to monthly production planning and reservoir-surveillance planning as required.</li><li>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</li><li>Participate in integrated field studies for maturing hydrocarbon resources.</li><li>Evaluate well and reservoir performance and recommend production-improvement opportunities.</li><li>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</li><li>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</li><li>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</li><li>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</li><li>Fulfil stand-by / on-call duties when required.</li><li>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</li><li>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</li></ul><p><strong>Notable Working Conditions</strong></p><p>Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Language requirements Excellent knowledge of written, read, and spoken English (required).</li></ul><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>