وظائف هندسة النظم في سلطنة عمان

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ABOUT THE JOB</p><br><p>The Omnichannel Architecture Governance community is regrouping architects from all our Tech Divisions, Regions and Functions to trigger, support or help accelerate initiatives and projects by providing architects with a cohesive set of principles, tools, strategies and a network of excellence.</p><br><p>CHANEL's Information Systems Department has completed a key milestone in its transformation by migrating its Enterprise Architecture repository to LeanIX.</p><br><p>After initial deployment, we are now entering a phase to broaden its usage and bring additional use cases. In our current organization, we are looking for a leader capable to drive the development of this inventory into a true strategic steering cockpit for the Group.</p><br><p>Within Chanel’s Global IT organisation, you will play a pivotal role in shaping how the Maison understands, governs, and evolves its technology landscape. As the Architecture Referential Product Owner, you will be the driving force behind our Enterprise Architecture Management (EAM) platform, ensuring it becomes a trusted source of truth for IT and business stakeholders across the globe.</p><br><p>You will sit at the crossroads of technology strategy, data governance, and cross-functional collaboration. You will interact daily with Enterprise Architects, IT domain leaders, application owners across regions, divisions and functions. You will have direct visibility into how Chanel plans, rationalises, and transforms its application portfolio to support its long-term ambitions.</p><br><p>You will help shape architectural decisions that touch every corner of the House — from boutique operations and client engagement to supply chain and corporate functions. If you are passionate about turning complex IT landscapes into clear, actionable insights, this role is for you.</p><br><p>WHAT IMPACT YOU CREATE AT CHANEL</p><br><ul><li><p><b>Own and steer the Architecture Referential (LeanIX) platform roadmap</b>: You contribute to define the vision, prioritize enhancements, and ensure the platform evolves in line with Chanel’s IT strategy. Your guidance directly influence how the organisation visualises and manages its technology portfolio.</p><br></li><li><p><b>Drive data quality and completeness</b>: You establish governance standards and engage with application owners and IT teams worldwide to ensure the information within LeanIX is accurate, up-to-date, and meaningful. High-quality data means better decision-making at every level.</p><br></li><li><p><b>Enable strategic IT portfolio decisions</b>: By delivering clear dashboards, reports, and analyses, you empower leadership to identify redundancies, assess technology risks, plan modernisation roadmaps, and allocate investment where it matters most.</p><br></li><li><p><b>Champion adoption and engagement</b>: You design and lead training sessions, communication campaigns, and community rituals that make LeanIX a living tool — not just a repository — used actively by hundreds of contributors across the organisation.</p><br></li><li><p><b>Connect the dots across the ecosystem</b>: You ensure LeanIX integrates seamlessly with adjacent tools and processes (CMDB, project portfolio management, cloud inventories), creating a coherent and connected view of Chanel’s IT landscape.</p><br></li></ul><p>What makes this role unique is the combination of product ownership rigour with enterprise-wide architectural impact, all within a Maison that values craft, excellence, and long-term thinking.</p><br><p>YOU ARE ENERGISED BY</p><br><ul><li><p>Bringing structure and clarity to complex, multi-layered technology environments — you find satisfaction in making the invisible visible.</p><br></li><li><p>Engaging with a diverse, global community of stakeholders — from architects and developers to C-level leaders — and building trusted relationships across cultures and time zones.</p><br></li><li><p>Operating in an environment where craftsmanship and attention to detail are valued as much in IT as they are in the products Chanel creates.</p><br></li><li><p>Navigating ambiguity with confidence — this is a role where you will need to shape processes and define best practices, not just follow them.</p><br></li><li><p>Continuous learning and staying at the forefront of Enterprise Architecture Management trends, tools, and methodologies.</p><br></li></ul><p>WHAT YOU WILL BRING</p><br><ul><li><p><b>Experience</b>: 5+ years of hands-on experience with LeanIX or a comparable Enterprise Architecture Management platform (e.g., Ardoq, Mega). Proven experience acting as a Product Owner or functional lead for an enterprise-scale platform.</p><br></li><li><p><b>Technical acumen</b>: A solid understanding of enterprise architecture frameworks (TOGAF, ArchiMate), IT portfolio management concepts, and application lifecycle management. Familiarity with integration patterns (APIs, data feeds) and adjacent IT management tools.</p><br></li><li><p><b>Stakeholder engagement</b>: A natural ability to collaborate with and influence senior stakeholders across IT functions. You are comfortable presenting to leadership and equally comfortable coaching individual contributors on data entry best practices.</p><br></li><li><p><b>Analytical mindset</b>: Strong skills in data analysis, reporting, and visualisation. You know how to turn raw data into compelling stories that drive action.</p><br></li><li><p><b>Communication</b>: Excellent written and verbal communication skills in English; French is a plus. You can adapt your message to your audience, whether it is a boardroom presentation or a hands-on workshop.</p><br></li><li><p><b>Rigour and autonomy</b>: You are structured, detail-oriented, and capable of managing multiple priorities in a fast-paced, global environment. You take ownership and deliver without needing to be closely supervised.</p><br></li><li><p><b>Mindset</b>: A genuine curiosity for how technology can serve a luxury Maison’s unique business model, and the humility to listen, learn, and adapt.</p><br></li></ul><p>WHAT CHANEL CAN OFFER YOU</p><br><ul><li><p><b>Enterprise-wide exposure</b>: You will gain a panoramic understanding of Chanel’s global IT landscape, business processes, and strategic priorities — a rare vantage point that accelerates your professional growth.</p><br></li><li><p><b>Leadership development</b>: By owning a platform with global reach, you will sharpen your skills in stakeholder management, influence without authority, and strategic communication.</p><br></li><li><p><b>Technical depth</b>: You will deepen your expertise in Enterprise Architecture Management, data governance, and IT portfolio optimisation — competencies that are increasingly valued across the industry.</p><br></li><li><p><b>A path forward</b>: This role can open doors to broader positions in IT strategy, enterprise architecture leadership, or digital transformation programme management within Chanel’s global organisation.</p><br></li><li><p><b>A distinctive culture</b>: At Chanel, you will experience a working environment where long-term vision takes precedence over short-term pressure, where excellence is expected and individuality is celebrated.</p><br></li></ul><p><i>At Chanel, we are focused on creating an inclusive culture that nurtures personal growth, contributing to collective progress. We believe the uniqueness of each individual increases the diversity, complementarity and effectiveness of our teams. We strongly encourage your application, as we value the perspective, experience and potential you could bring to Chanel.</i></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b><br></b></p><p><b>Job purpose:</b></p><p><br></p><p>The Senior Low-Programming Systems Developer is responsible for designing, developing, and maintaining high-quality web and mobile applications using the OutSystems Low-Programming platform. This role requires advanced technical expertise, strong problem-solving skills, and the ability to collaborate effectively with multidisciplinary teams to deliver scalable, secure, and efficient digital solutions.</p><p><br></p><p><b>Tasks and responsibilities:</b></p><p><br></p><p>Leading the design, development, and deployment of applications using the OutSystems platform in line with business requirements.</p><p><br></p><p>Building and maintaining front-end and back-end application modules while ensuring performance, scalability, and the application of best security practices.</p><p><br></p><p>Integrate OutSystems applications with databases, application programming interfaces (APIs), and external systems using REST/SOAP and other integration techniques.</p><p><br></p><p>Ensuring the quality of solutions through comprehensive testing, error correction, and performance improvement.</p><p><br></p><p>Active participation in Agile meetings and methodologies such as Scrum meetings, Sprint planning, and improvement and review sessions.</p><p><br></p><p>Applying best practices in user experience and user interface (UI/UX) in developing responsive and user-friendly applications.</p><p><br></p><p>Collaborating with business analysts, architects, and project managers to transform functional requirements into effective technical solutions.</p><p><br></p><p>Maintaining high software standards through code review and adherence to OutSystems architecture and best practices.</p><p><br></p><p>Developing applications according to a Minimum Viable Product (MVP) approach while ensuring ease of maintenance and scalability.</p><p><br></p><p>Supporting and guiding junior developers, enhancing their skills development, and ensuring the quality of code within the team.</p><p><br></p><p>Identifying and proactively addressing technical debts and proposing improvements to the systems' architecture.</p><p><br></p><p>Keeping up with updates to the OutSystems platform, modern tools and frameworks, and applying innovations to improve project implementation.</p><p><br></p><p><b>Qualifications and experience:</b></p><p><br></p><p>Bachelor's degree in Computer Science, Software Engineering, or any related field.</p><p><br></p><p>At least 6 years of experience in application development, including at least 3 years using OutSystems.</p><p><br></p><p>OutSystems certification at the Professional or Expert level is a prerequisite.</p><p><br></p><p>Strong knowledge of front-end and back-end development in OutSystems, Service Studio, Integration Studio and Lifetime tools.</p><p><br></p><p>Experience in dealing with relational databases such as SQL Server, MySQL, or Oracle.</p><p><br></p><p>Proven experience in code testing, CI/CD fonts, and version control systems such as Git.</p><p><br></p><p>A strong understanding of software design principles, architecture, and security best practices.</p><p><br></p><p>The ability to work independently and take responsibility for the outputs.</p><p><br></p><p>Excellent skills in analysis, error correction, and technical guidance.</p><p><br></p><p>Strong communication skills and the ability to work within a team environment</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur Système Expérimenté - GNSS F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Parlons de votre future mission :<br>Au sein de la Direction Technique, vous serez intégré-e dans une Direction Projets-Produits.<br>En Equipes pluridisciplinaires, nous imaginerons ensemble les architectures dans nos futurs produits de haute technologie dans les secteurs aéronautique, terrestre et maritime en favorisant les synergies et l'intelligence collective.<br>Vous vous verrez confier les missions suivantes :<br>• Analyser les spécifications de besoin et proposer une architecture du système et un découpage en chaînes fonctionnelles ;<br>• Etablir les spécifications systèmes fonctionnelles et de performances ;<br>• Allouer ces performances vers les chaînes fonctionnelles et principaux sous-ensembles (imageur, mécatronique, UMI, électronique, etc) ;<br>• Spécifier en détails la chaîne de supervision du produit en charge de gérer l'état du produit, la communication avec l'équipement, la surveillance des chaînes fonctionnelles et le séquencement des différents traitements. A ce titre vous participez aussi à l'élaboration de la stratégie de vérification de cette chaîne et à la spécification des moyens de tests associés ;<br>• Valider la conformité aux spécifications à l'aide des outils de simulation ;<br>• Etablir les dossiers justificatifs de définition (DJD)</p><br><br><p>Parlons des technologies :<br>Vous interviendrez spécifiquement dans le domaine du GNSS et contribuerez au développement de solutions de nouvelle génération !<br>Au cœur de vos futurs projets :<br>Intégration de Galileo : Vous participerez à l'intégration des différents services de Galileo dans les solutions GNSS de Safran, afin d'accompagner le passage à la pleine capacité opérationnelle de ce Système Européen.<br>Développement de solutions robustes de localisation GNSS : Vous travaillerez sur le développement de solutions innovantes, capables de résister efficacement au brouillage et au leurrage – des menaces désormais avérées tant sur les théâtres opérationnels que dans l'espace aérien commercial.<br>Rejoignez-nous pour façonner l'avenir des navigations aéronautiques et militaires et contribuer à la sécurité et la fiabilité des solutions GNSS de demain !</p><br><br><p>Parlons de vous :<br>Vous êtes intégré(e) comme Ingénieur(e) Système au sein de nos projets/systèmes<br>complexes dans le domaine de l'aéronautique et de l'armement.<br>Structuré et pragmatique, vous disposez de compétences pluridisciplinaires qui vous permettent de concevoir le produit, de l'étude fonctionnelle à la mise en service. Partenaire de tous les métiers vous êtes acteur clé du développement et de l'innovation !<br>Ingénieur expérimenté ayant une expérience solide dans l'ingénierie Système, ou les produits de Navigation, vous avez à coeur d'approfondir vos compétences tout en découvrant un nouveau milieu. </p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment.</p><p>Key Responsibilities:</p><ul><li>Work closely with sales teams to understand customer requirements and define solution approaches.</li><li>Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation.</li><li>Develop solution architectures, demos, PoCs, and presentations aligned with customer needs.</li><li>Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions.</li><li>Support pricing, costing, and commercial models in coordination with finance and leadership.</li><li>Participate in client workshops, technical discussions, and solution presentations.</li><li>Maintain reusable assets such as proposal templates, case studies, and solution accelerators.</li><li>Stay current with industry trends, technologies, and competitive offerings.</li></ul><p>Skills &amp; Experience:</p><ul><li>Strong understanding of enterprise IT solutions, digital platforms, and system integration.</li><li>Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations.</li><li>Excellent communication, stakeholder management, and presentation skills.</li><li>Ability to translate business requirements into technical and functional solutions.</li></ul><p>Success Metrics (KPIs)</p><ul><li>Number of RFP/RFI responses supported and submitted per quarter.</li><li>Bid win rate and contribution to revenue pipeline.</li><li>Quality and completeness of solution proposals (as measured by internal and client feedback).</li><li>Turnaround time for proposal and solution preparation.</li><li>Number of client workshops, demos, and PoCs supported.</li><li>Reuse and creation of proposal assets, accelerators, and case studies.</li><li>Collaboration effectiveness with sales and delivery teams.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field.</li><li>MBA is an added advantage</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e Système F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein de la Direction Technique, vous serez intégré-e dans une Direction Projets-Produits. En équipes pluridisciplinaires, nous imaginerons ensemble les architectures dans nos futurs produits de haute technologie dans les secteurs aéronautique, terrestre et maritime en favorisant les synergies et l'intelligence collective.<br>Vous vous verrez confier les missions suivantes :<br>• Analyser les spécifications de besoin et proposer une architecture du système et un découpage en chaînes fonctionnelles ; <br>• Etablir les spécifications systèmes fonctionnelles et de performances ;<br>• Allouer ces performances vers les chaînes fonctionnelles et principaux sous-ensembles (imageur, mécatronique, UMI, électronique, etc.) ; <br>• Spécifier en détails la chaîne de supervision du produit en charge de gérer l'état du produit, la communication avec l'équipement, la surveillance des chaînes fonctionnelles et le séquencement des différents traitements. A ce titre vous participez aussi à l''élaboration de la stratégie de vérification de cette chaîne à la spécification des moyens de tests associés ;<br>• Valider la conformité aux spécifications à l'aide des outils de simulation ;<br>• Etablir les dossiers justificatifs de définition (DJD).</p><br><br><p>RAS</p><br><br><p>Jeune diplômé-e et titulaire d'un diplôme d'ingénieur généraliste, vous avez à cœur de continuer à monter en compétences. Nos technologies de pointe vous permettront d'approfondir vos connaissances techniques.<br>Vous êtes intégré-e comme Ingénieur-e Système au sein de nos projets/systèmes complexes dans le domaine de l'aéronautique et de l'armement. Structuré et pragmatique, vous disposez de compétences pluridisciplinaires qui vous permettent de concevoir le produit, de l'étude fonctionnelle à la mise en service. Partenaire de tous les métiers, vous êtes acteur clé du développement et de l'innovation ! </p><br><br><br> </div>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring a Head of Product Technology to own the technology platform end-to-end: the application and the infrastructure on which it runs. This is not background plumbing. The application is the product. The infrastructure is the foundation on which settlement finality, system resilience, latency performance, and operational availability are delivered. The post-holder must understand both layers as one integrated whole and own them as one.</p> <p>In build, the post-holder is the architect of the platform from a blank sheet: technology reference architecture, infrastructure topology, hosting strategy, network and database design, integration patterns, security architecture, and resilience and disaster-recovery architecture. In run, the same person operates the platform and the team they have designed. This is not a sit-in-your-office role.</p> <h4>What the role covers</h4> <ul> <li>Designing the technology reference architecture from a blank sheet: application architecture, infrastructure topology, database platform, network design, integration patterns, security architecture, and resilience and DR architecture</li> <li>Owning the application end-to-end: design, configuration, integration, data model, change management, and support</li> <li>Owning the infrastructure that hosts the platform: compute, storage, network, virtualisation, database, and middleware, whether on-premise, hosted, or cloud</li> <li>Owning platform resilience: high availability design, backup and recovery architecture, disaster recovery, business continuity, and tested failover</li> <li>Owning end-to-end platform performance including transaction latency, capacity planning, and headroom strategy</li> <li>Owning first-line platform security: secure configuration, hardening, identity and access management, vulnerability management, patching, and security incident response</li> <li>Owning the technical relationship with the build vendor; holding them to account on functional, technical, and operational delivery</li> <li>Designing the human operating model for the platform: team shape, shift patterns, on-call rotations, incident command structure, runbooks, and third-party support arrangements</li> <li>Owning all integrations between the platform and external systems: custodians, settlement banks, exchange, SWIFT, Bloomberg, and ISIN infrastructure</li> <li>Line managing the Application Managers, Database Administrator, and the wider platform engineering team as it builds</li> </ul> <h4>Requirements</h4> <h4>Who we are looking for</h4> <p>At least 12 years in financial-services platform technology, with substantial time spent owning a mission-critical platform end-to-end across both application and infrastructure layers. Direct, demonstrable experience architecting a mission-critical regulated financial platform from a blank sheet: this is non-negotiable. Direct, demonstrable experience as the technical authority on a CSD, custody platform, post-trade platform, capital markets platform, or core banking system of comparable mission-criticality: also non-negotiable.</p> <p>Hands-on technical credibility across both application and infrastructure layers: able to read code, query a database, design a network topology, debug an integration, and challenge a vendor's technical decisions with authority. Demonstrated experience holding a major build vendor or system integrator to account on technical delivery. Deep understanding of how a regulated financial-services business works, not just the technology underneath it. Fluent in English.</p> <p>Experience in financial market infrastructure (CSD, CCP, exchange, or payment system) is an advantage. So is familiarity with CPMI-IOSCO principles and experience designing SWIFT, Bloomberg, and ICSD integrations.</p> <h4>What this is</h4> <p>The platform does not exist yet. The architecture has not been designed, the infrastructure has not been built, and the operating model has not been written. The person who takes this role will have done all of it. If you have genuinely architected and owned a mission-critical regulated financial platform from a blank sheet, and you have the hands-on credibility and delivery drive to do it again, this is worth a conversation.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur(e) Algorithmes de Navigation Aéronautique F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoignez une équipe dynamique au Centre d'Ingénierie Produits de Navigation (CIPN) de Safran Electronics &amp; Defense !<br>Vous ferez partie d'une équipe passionnée qui développe des systèmes de navigation avancés pour l'aéronautique. Votre rôle consistera à identifier les besoins des équipements, proposer des solutions innovantes et travailler en collaboration avec des experts dans divers domaines techniques tels que le traitement du signal, l'architecture système, le logiciel embarqué, l'électronique et la sûreté de fonctionnement.<br>Ce que vous ferez:<br>• Étude et conception d'algorithmes de navigation : analyser les besoins des équipements de navigation et concevoir des algorithmes avancés.<br>• Prototypage sur simulateur : développer et tester des prototypes d'algorithmes sur des simulateurs pour évaluer leurs performances.<br>• Rédaction de documents de spécification : rédiger des documents de spécification détaillés avec précision et traçabilité pour assurer une compréhension claire et cohérente des besoins.<br>• Évaluation de la maturité technologique : évaluer la performance et la maturité des technologies et des algorithmes utilisés.<br>• Modélisation de l'architecture des systèmes : utiliser des outils MBSE (Model-Based Systems Engineering) pour modéliser les architectures des systèmes.</p><br><br><p>• Innovation et technologie : Travaillez sur des projets de pointe utilisant les technologies les plus récentes en navigation aéronautique et spatiale.<br>• Équipe dynamique et collaborative : Intégrez une équipe de passionnés qui partagent leurs expertises et collaborent de manière étroite.<br>• Développement professionnel : Bénéficiez d'opportunités de développement personnel et professionnel au sein d'une entreprise leader dans le domaine de l'aéronautique et de la défense.<br>Si vous êtes prêt(e) à relever ce défi passionnant, envoyez-nous votre candidature dès maintenant !</p><br><br><p>Vous êtes un(e) jeune ingénieur(e) de formation généraliste ou aéronautique/spatial avec une première expérience ou un stage en recherche et développement. Vous possédez un fort intérêt pour les technologies aéronautiques et souhaitez contribuer à des projets innovants.<br>Compétences et expériences idéales (tous les critères ne sont pas requis) :<br>• Bases solides en automatique et notamment en filtrage de Kalman<br>• Connaissances en traitement du signal<br>• Compétences en logiciel temps réel embarqué<br>• Expérience avec les environnements Matlab et Simulink<br>• Expérience en spécification des besoins systèmes et/ou logiciels de haut niveau<br>• Connaissance des normes de développement aéronautique et/ou spatial</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment.</p><p>Key Responsibilities:</p><ul><li>Work closely with sales teams to understand customer requirements and define solution approaches.</li><li>Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation.</li><li>Develop solution architectures, demos, PoCs, and presentations aligned with customer needs.</li><li>Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions.</li><li>Support pricing, costing, and commercial models in coordination with finance and leadership.</li><li>Participate in client workshops, technical discussions, and solution presentations.</li><li>Maintain reusable assets such as proposal templates, case studies, and solution accelerators.</li><li>Stay current with industry trends, technologies, and competitive offerings.</li></ul><p>Skills &amp; Experience:</p><ul><li>Strong understanding of enterprise IT solutions, digital platforms, and system integration.</li><li>Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations.</li><li>Excellent communication, stakeholder management, and presentation skills.</li><li>Ability to translate business requirements into technical and functional solutions.</li></ul><p>Success Metrics (KPIs)</p><ul><li>Number of RFP/RFI responses supported and submitted per quarter.</li><li>Bid win rate and contribution to revenue pipeline.</li><li>Quality and completeness of solution proposals (as measured by internal and client feedback).</li><li>Turnaround time for proposal and solution preparation.</li><li>Number of client workshops, demos, and PoCs supported.</li><li>Reuse and creation of proposal assets, accelerators, and case studies.</li><li>Collaboration effectiveness with sales and delivery teams.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Years of Experience 12+ Years</li><li>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</li><li>Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field.</li><li>MBA is an added advantage</li></ul><p></p></section>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring a Head of Product Technology to own the technology platform end-to-end: the application and the infrastructure on which it runs. This is not background plumbing. The application is the product. The infrastructure is the foundation on which settlement finality, system resilience, latency performance, and operational availability are delivered. The post-holder must understand both layers as one integrated whole and own them as one.</p> <p>In build, the post-holder is the architect of the platform from a blank sheet: technology reference architecture, infrastructure topology, hosting strategy, network and database design, integration patterns, security architecture, and resilience and disaster-recovery architecture. In run, the same person operates the platform and the team they have designed. This is not a sit-in-your-office role.</p> <h4>What the role covers</h4> <ul> <li>Designing the technology reference architecture from a blank sheet: application architecture, infrastructure topology, database platform, network design, integration patterns, security architecture, and resilience and DR architecture</li> <li>Owning the application end-to-end: design, configuration, integration, data model, change management, and support</li> <li>Owning the infrastructure that hosts the platform: compute, storage, network, virtualisation, database, and middleware, whether on-premise, hosted, or cloud</li> <li>Owning platform resilience: high availability design, backup and recovery architecture, disaster recovery, business continuity, and tested failover</li> <li>Owning end-to-end platform performance including transaction latency, capacity planning, and headroom strategy</li> <li>Owning first-line platform security: secure configuration, hardening, identity and access management, vulnerability management, patching, and security incident response</li> <li>Owning the technical relationship with the build vendor; holding them to account on functional, technical, and operational delivery</li> <li>Designing the human operating model for the platform: team shape, shift patterns, on-call rotations, incident command structure, runbooks, and third-party support arrangements</li> <li>Owning all integrations between the platform and external systems: custodians, settlement banks, exchange, SWIFT, Bloomberg, and ISIN infrastructure</li> <li>Line managing the Application Managers, Database Administrator, and the wider platform engineering team as it builds</li> </ul> <h4>Requirements</h4> <h4>Who we are looking for</h4> <p>At least 12 years in financial-services platform technology, with substantial time spent owning a mission-critical platform end-to-end across both application and infrastructure layers. Direct, demonstrable experience architecting a mission-critical regulated financial platform from a blank sheet: this is non-negotiable. Direct, demonstrable experience as the technical authority on a CSD, custody platform, post-trade platform, capital markets platform, or core banking system of comparable mission-criticality: also non-negotiable.</p> <p>Hands-on technical credibility across both application and infrastructure layers: able to read code, query a database, design a network topology, debug an integration, and challenge a vendor's technical decisions with authority. Demonstrated experience holding a major build vendor or system integrator to account on technical delivery. Deep understanding of how a regulated financial-services business works, not just the technology underneath it. Fluent in English.</p> <p>Experience in financial market infrastructure (CSD, CCP, exchange, or payment system) is an advantage. So is familiarity with CPMI-IOSCO principles and experience designing SWIFT, Bloomberg, and ICSD integrations.</p> <h4>What this is</h4> <p>The platform does not exist yet. The architecture has not been designed, the infrastructure has not been built, and the operating model has not been written. The person who takes this role will have done all of it. If you have genuinely architected and owned a mission-critical regulated financial platform from a blank sheet, and you have the hands-on credibility and delivery drive to do it again, this is worth a conversation.</p></p><p></p>

<p><h4>Description</h4> <p>The role</p> <p>We are looking for a hands-on senior ML engineer to lead the development and operation of production-grade AI systems across LLMs, OCR, and voice. This role combines deep technical ownership with leadership of a high-performing team of junior engineers, as well as direct engagement with stakeholders to shape AI solutions.</p> <p><strong>Responsibilities:</strong></p> <ul> <li>Lead and mentor a team of highly talented junior ML engineers through:<br>   • Code reviews, design reviews, and technical direction<br>   • Enforcement of strong software engineering and ML best practices</li> <li>Design, deploy, and operate scalable AI systems with a focus on reliability and performance</li> <li>Lead production deployment of LLMs and multimodal systems (RAG, OCR, voice)</li> <li>Own <strong>model performance end-to-end</strong>, combining evaluation, observability, and hardware optimization:<br>   • Build evaluation pipelines (benchmarks, regression testing, LLM-as-judge)<br>   • Implement deep observability (tracing, latency, error tracking)<br>   • Optimize GPU utilization (multi-GPU serving, batching, quantization, memory tuning)<br>   • Continuously improve throughput, latency, and cost efficiency</li> <li>Architect and manage GPU infrastructure:<br>   • Model serving, load balancing, and scaling strategies<br>   • Hardware-aware deployment and performance tuning</li> <li>Build and maintain robust MLOps pipelines:<br>   • Model/version management, CI/CD, automated testing, and rollback strategies<br>   • Monitoring and feedback loops for continuous improvement</li> <li>Engage directly with clients and stakeholders to:<br>   • Gather and clarify business requirements<br>   • Translate non-technical needs into well-defined technical problems<br>   • Communicate solutions, trade-offs, and progress through clear documentation, reports, and proposals</li> <li>Contribute hands-on to system design, implementation, debugging, and production incident resolution</li> </ul> <p><strong>Requirements</strong></p> <ul> <li>Proven experience deploying LLMs in production</li> <li>Strong experience with GPU-based inference and optimization</li> <li>Solid backend engineering skills (Python, APIs, distributed systems)</li> <li>Experience with MLOps and production ML systems</li> <li>Experience with OCR/document AI and/or voice systems (STT/TTS)</li> <li>Experience with Docker and Kubernetes</li> <li>Strong understanding of modern AI architectures (RAG, vector DBs, agent workflows)</li> <li>Experience mentoring or leading engineers</li> <li>Strong communication skills with the ability to bridge business and technical domains</li> </ul> <p><strong>Nice to have:</strong></p> <ul> <li>Experience with open-weight models (Qwen, Llama, DeepSeek, Gemma)</li> <li>Experience with on-prem / sovereign AI deployments</li> <li>Experience with LoRA / fine-tuning</li> <li>Multilingual or Arabic NLP experience</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The role</p> <p>We are looking for a hands-on senior ML engineer to lead the development and operation of production-grade AI systems across LLMs, OCR, and voice. This role combines deep technical ownership with leadership of a high-performing team of junior engineers, as well as direct engagement with stakeholders to shape AI solutions.</p> <p><strong>Responsibilities:</strong></p> <ul> <li>Lead and mentor a team of highly talented junior ML engineers through:<br>   • Code reviews, design reviews, and technical direction<br>   • Enforcement of strong software engineering and ML best practices</li> <li>Design, deploy, and operate scalable AI systems with a focus on reliability and performance</li> <li>Lead production deployment of LLMs and multimodal systems (RAG, OCR, voice)</li> <li>Own <strong>model performance end-to-end</strong>, combining evaluation, observability, and hardware optimization:<br>   • Build evaluation pipelines (benchmarks, regression testing, LLM-as-judge)<br>   • Implement deep observability (tracing, latency, error tracking)<br>   • Optimize GPU utilization (multi-GPU serving, batching, quantization, memory tuning)<br>   • Continuously improve throughput, latency, and cost efficiency</li> <li>Architect and manage GPU infrastructure:<br>   • Model serving, load balancing, and scaling strategies<br>   • Hardware-aware deployment and performance tuning</li> <li>Build and maintain robust MLOps pipelines:<br>   • Model/version management, CI/CD, automated testing, and rollback strategies<br>   • Monitoring and feedback loops for continuous improvement</li> <li>Engage directly with clients and stakeholders to:<br>   • Gather and clarify business requirements<br>   • Translate non-technical needs into well-defined technical problems<br>   • Communicate solutions, trade-offs, and progress through clear documentation, reports, and proposals</li> <li>Contribute hands-on to system design, implementation, debugging, and production incident resolution</li> </ul> <p><strong>Requirements</strong></p> <ul> <li>Proven experience deploying LLMs in production</li> <li>Strong experience with GPU-based inference and optimization</li> <li>Solid backend engineering skills (Python, APIs, distributed systems)</li> <li>Experience with MLOps and production ML systems</li> <li>Experience with OCR/document AI and/or voice systems (STT/TTS)</li> <li>Experience with Docker and Kubernetes</li> <li>Strong understanding of modern AI architectures (RAG, vector DBs, agent workflows)</li> <li>Experience mentoring or leading engineers</li> <li>Strong communication skills with the ability to bridge business and technical domains</li> </ul> <p><strong>Nice to have:</strong></p> <ul> <li>Experience with open-weight models (Qwen, Llama, DeepSeek, Gemma)</li> <li>Experience with on-prem / sovereign AI deployments</li> <li>Experience with LoRA / fine-tuning</li> <li>Multilingual or Arabic NLP experience</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for supporting the implementation, configuration, testing, integration, and maintenance of technology solutions and applications. The role works closely with project teams, developers, vendors, and business users to ensure that technical requirements are met, and systems operate efficiently and effectively.</p><p>Assist in the implementation, deployment, and integration of systems and technology solutions. Coordinate with internal servers and network team and explain IP subnetting and classes Basic understanding of IP address subnetting classes Basic understanding of VPN connections type in network Participate in technical design discussions and contribute to solution development activities. Support the configuration, testing, and deployment of applications and system enhancements. Review technical documentation and assist in validating system configurations and functionalities. Support software testing activities and verify that technical requirements are met. Assist in analyzing system issues and troubleshooting application defects. Participate in change request implementation activities, including configuration, testing, and deployment. Support developers and vendors during implementation and post-go-live activities. Monitor system performance and report technical issues, risks, and improvement opportunities. Assist in maintaining technical documentation, procedures, and support guides. Participate in incident management activities and root cause analysis exercises. Ensure compliance with IT standards, security requirements, and established procedures. Collaborate with internal stakeholders to understand business requirements and support solution delivery. Contribute to automation and process improvement initiatives where applicable.</p><p>Act as the primary technical liaison between business stakeholders, vendors, project teams, and internal IT departments to ensure successful project delivery. Schedule, facilitate, and lead project meetings, workshops, requirement-gathering sessions, technical discussions, and status review meetings with business users, vendors, and internal teams. Coordinate with vendor project managers and technical teams to ensure project deliverables, timelines, dependencies, and technical requirements are clearly understood and executed. Manage project communications and provide regular project status updates, risk assessments, and issue reports to management and stakeholders.</p><p>Coordinate with internal Network, Server, Security, Database, and Infrastructure teams to support project implementation and operational requirements. Lead infrastructure readiness activities, ensuring all network, server, storage, security, and connectivity requirements are completed before implementation. Design, review, and maintain IP addressing VLAN configurations, and network segmentation plans. Review and validate server specifications, operating system requirements, network configurations, load-balancing requirements. Work closely with server teams to provision and configure development, staging, and production environments. Coordinate server access, user permissions, service accounts, and infrastructure-related requirements for project teams and vendors. Monitor infrastructure dependencies and ensure all server, network, and security configurations align with project requirements.</p><p>Demonstrate strong understanding of VPN technologies, including Site-to-Site VPN, Client-to-Site VPN, SSL VPN connectivity. Coordinate VPN setup and connectivity between internal systems, cloud environments, third-party vendors, and external partners. Work with network and security teams to implement firewall policies, access control rules, NAT configurations, and secure communication channels. Ensure network connectivity between systems, applications, databases, and vendor environments is established and tested successfully. Coordinate security reviews and ensure all connectivity solutions comply with organizational security standards and policies.</p><p>Serve as the primary point of contact for vendors regarding technical, infrastructure, integration, network, and connectivity requirements. Coordinate daily with vendor project managers and technical teams to review project progress, discuss issues, and drive timely resolution of blockers. Assist vendors in resolving network connectivity issues, VPN configuration issues, server access requests, firewall-related issues, and system integration challenges. Coordinate implementation activities between vendors and internal IT teams throughout project initiation, execution, deployment, and project closure. Ensure vendor access requests, server access, VPN connectivity, and infrastructure requirements are processed and completed within project timelines. Review vendor technical documentation, architecture diagrams, integration specifications, and deployment plans. Validate vendor solutions to ensure compatibility with existing infrastructure, network, security, and enterprise architecture standards.</p><p>Participate in technical solution design discussions and contribute to application, infrastructure, and integration architecture decisions. Coordinate system integrations between internal applications, third-party platforms, cloud services, APIs, databases, and vendor solutions. Review and validate interface specifications, data mapping documents, API integrations, and technical design documents. Support application configuration, deployment, upgrades, enhancements, and Vendor production releases. Ensure all integration requirements are documented, tested, and successfully implemented.</p><p>Provide day-to-day technical coordination and support for project teams, vendors, developers, infrastructure teams, and business users. Monitor system performance, application availability, network connectivity, and project servers infrastructure health. Investigate and troubleshoot application, server, database, network, VPN, and integration-related incidents. Lead incident management, problem management, and root cause analysis activities. Coordinate with support teams and vendors to ensure timely resolution of production issues. Identify recurring issues and recommend corrective and preventive actions.</p><p>Maintain technical documentation, network diagrams, VPN configurations, server inventories, integration documents, and operational procedures. Prepare meeting minutes, issue logs, risk registers, project reports, and technical implementation documents. Ensure compliance with IT governance policies, cybersecurity standards, operational procedures, and regulatory requirements. Support audits, security reviews, and compliance assessments related to infrastructure and project activities.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>MINIMUM EDUCATION, QUALIFICATIONS SKILLS</strong></p><p>Education: Bachelor s degree in computer science, Information Technology, Software Engineering, Computer Engineering, or a related field.</p><p>Experience: 0 3 years of experience in Information Technology, Software Development, System Support, System Implementation, or a related field. Fresh graduates with relevant internships or project experience may be considered.</p><p>Special Skills &amp; Knowledge: Basic understanding of software development and system implementation concepts. Knowledge of databases, operating systems, and application support. Familiarity with SDLC concepts and testing methodologies. Strong analytical and problem-solving skills. Good communication and teamwork abilities. Ability to learn new technologies and adapt to changing environments.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Purpose The Mechanical Engineer will be responsible for the operation, maintenance, troubleshooting, and optimization of all mechanical, plumbing, water treatment, and fire protection systems within a high-end VIP facility. The role requires ensuring uninterrupted performance of complex building systems while maintaining strict discretion, minimal disruption, and adherence to premium operational standards in a live, occupied environment.</p><p>Key Responsibilities</p><ul><li>Manage and maintain all building mechanical services, including plumbing, hot water systems, drainage, and water distribution, ensuring reliable performance with stable pressure, instant hot water delivery, and silent operation.</li><li>Operate and troubleshoot VFD booster pump systems and centralized hot water systems (solar, heat pump, and gas boilers) with circulation loops to ensure continuous and efficient service delivery.</li><li>Maintain Water Treatment Plants (RO, softeners, UV systems) to ensure safe, high-quality potable water standards across the facility.</li><li>Ensure optimal performance of acoustic/silent drainage systems and prevent noise transmission in sensitive and VIP areas.</li><li>Maintain, troubleshoot, and optimize all water features and wellness systems, including infinity pools, jacuzzis, spas, fountains, and water walls, along with associated pumps, filtration, and chemical dosing systems.</li><li>Ensure all water systems operate leak-free and safe, with full protection of architectural finishes, interiors, and luxury installations.</li><li>Maintain and test fire protection systems, including sprinkler networks, pre-action systems, ensuring full readiness and compliance.</li><li>Implement strict control of condensation, leakage, and insulation integrity, using approved insulation methods (e.g., closed-cell elastomeric insulation such as Armaflex).</li><li>Carry out non-intrusive diagnostics using thermal imaging and advanced testing tools to detect faults without damaging finishes or disrupting interiors.</li><li>Plan and execute preventive maintenance activities discreetly, ensuring zero disruption, minimal noise, and full alignment with VIP occupancy schedules.</li><li>Coordinate all maintenance activities with facility operations teams to ensure smooth execution in live, occupied environments.</li><li>Ensure full compliance with international mechanical, plumbing, and fire safety standards in all systems and maintenance practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor / Diploma in Mechanical Engineering with Minimum 7 years of proven experience in luxury residential buildings, VIP facilities, palaces, 5-star hotels, or high-end commercial complexes.</li><li>Strong hands-on knowledge of plumbing systems, HVAC integration, water treatment plants, and fire protection systems.</li><li>Experience with VFD pump systems and advanced mechanical troubleshooting techniques.</li><li>Familiarity with international mechanical, plumbing, and fire safety standards and codes.</li><li>Ability to work in live, occupied environments with strong attention to detail, discretion, and professional conduct.</li><li>Handling Mechanical Maintenance team.</li><li>Good communication skills.</li><li>Preparing Reports &amp; knowledge in CMMS system.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead and manage the organization's Information and Cybersecurity function across Information Technology (IT), Information and Communication Technology (ICT), Operational Technology (OT), and SCADA environments. Ensure the confidentiality, integrity, and availability of information assets by establishing effective governance, risk management, compliance, security operations, and cyber resilience capabilities. The role is responsible for developing and implementing cybersecurity strategies, frameworks, policies, controls, and monitoring mechanisms to protect the organization from evolving cyber threats while ensuring compliance with regulatory and industry requirements.</p><p>Key Responsibilities</p><p>Cybersecurity Strategy and Governance</p><ul><li>Develop and implement the organization's cybersecurity strategy aligned with corporate objectives.</li><li>Establish and manage cybersecurity governance frameworks, policies, standards, and procedures.</li><li>Present cybersecurity risks, trends, and strategic initiatives to executive management.</li></ul><p>Cybersecurity Risk Management</p><ul><li>Identify, assess, and monitor cybersecurity risks and vulnerabilities.</li><li>Develop and oversee risk treatment plans and mitigation strategies.</li><li>Maintain the cybersecurity risk register and reporting framework.</li><li>Lead risk assessments and mitigation activities across IT, ICT, OT, Industrial Control Systems (ICS), and SCADA environments, ensuring the protection of critical infrastructure, control systems, IoT devices, and field assets.</li></ul><p>Compliance and Regulatory Requirements</p><ul><li>Ensure compliance with applicable cybersecurity regulations, standards, and frameworks, including ISO 27001, SCADA cybersecurity standards, Oman Investment Authority (OIA) requirements, and other relevant regulations.</li><li>Coordinate internal and external cybersecurity audits.</li><li>Monitor regulatory developments and implement new requirements.</li><li>Represent the organization before regulators, government entities, auditors, and industry forums to ensure alignment with emerging obligations and requirements.</li><li>Ensure adherence to industry best practices and regulatory standards.</li></ul><p>Security Architecture and Technical Controls</p><ul><li>Review and approve security architectures and technical controls across IT, OT, ICS, and SCADA environments to ensure resilience, reliability, and compliance.</li><li>Oversee the implementation of security controls and technical safeguards.</li><li>Evaluate and approve appropriate cybersecurity technologies and solutions.</li><li>Ensure cybersecurity requirements are integrated throughout project lifecycles, including governance and risk management in digital transformation and infrastructure initiatives.</li></ul><p>Security Operations and Incident Response</p><ul><li>Ensure effective detection, investigation, response, and recovery from cyber incidents.</li><li>Lead major cybersecurity incident management and crisis response efforts.</li><li>Oversee Security Operations Center (SOC) services, advanced threat detection systems, SOAR platforms, and security analytics capabilities.</li><li>Monitor KPIs such as Incident Response Effectiveness, Mean Time to Detect (MTTD), and Mean Time to Respond (MTTR).</li></ul><p>Threat and Vulnerability Management</p><ul><li>Ensure timely and effective remediation of identified security vulnerabilities.</li><li>Enhance detection and response capabilities through automation and advanced analytics.</li></ul><p>Third-Party and Supply Chain Security</p><ul><li>Establish and manage a third-party cybersecurity risk management framework.</li><li>Assess cybersecurity risks associated with vendors and partners.</li><li>Incorporate cybersecurity requirements into contracts and agreements.</li><li>Monitor supplier compliance with security requirements.</li></ul><p>Business Continuity and Cyber Resilience</p><ul><li>Collaborate with Risk Management and Business Continuity teams to integrate cyber resilience requirements into Business Continuity and Disaster Recovery plans.</li><li>Support crisis management during cyber incidents and emergencies.</li></ul><p>Security Awareness and Culture</p><ul><li>Develop and implement organization-wide cybersecurity awareness and training programs.</li><li>Promote a strong cybersecurity culture across all organizational levels.</li><li>Measure and report on the effectiveness of awareness initiatives.</li></ul><p>Security Assurance and Continuous Improvement</p><ul><li>Comply with Quality, Health, Safety, and Environmental (QHSE) requirements.</li><li>Maintain the confidentiality and integrity of organizational information.</li><li>Lead continuous improvement initiatives to enhance cybersecurity maturity and organizational resilience.</li></ul><p>People Leadership and Resource Management</p><ul><li>Define SMART performance objectives, responsibilities, and authorities for team members.</li><li>Manage and evaluate performance fairly and transparently while creating individual development plans.</li><li>Mentor and support team members to improve capabilities and performance.</li><li>Foster a positive and productive work environment.</li><li>Stay current with technological developments and guide the team in adopting relevant advancements.</li><li>Delegate responsibilities with clearly defined timelines and quality expectations.</li></ul><p>Policies and Procedures</p><ul><li>Comply with all organizational policies and guidelines.</li><li>Identify opportunities for process improvement, development, and automation.</li><li>Enhance and document existing procedures while clearly assigning responsibilities within the team.</li><li>Ensure accurate, comprehensive, and timely reporting in accordance with organizational standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Cybersecurity, Computer Science, Software Engineering, or an equivalent discipline.</li><li>9 years of experience in cybersecurity, security regulations, network and cybersecurity, information security, computer systems engineering, information systems, networking, or a related IT discipline.</li><li>Experience working in ICT and OT environments.</li><li>At least 2 years of leadership or managerial experience.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced General Manager Aluminium &amp; Faade Works to lead and scale a high-performing business unit specializing in faade engineering, aluminium systems, curtain walls, structural glazing, cladding, and architectural metalwork. The role carries full responsibility for business performance, project delivery, commercial management, technical excellence, and strategic growth across regional markets.</p><p><strong>Key Responsibilities</strong></p><p><strong>Business Leadership &amp; Operations</strong></p><ul><li>Own the P&amp;L, revenue growth, profitability, budgeting, and operational performance of the business unit.</li><li>Develop and execute business strategies aligned with organizational objectives.</li><li>Drive efficiency across estimating, procurement, fabrication, installation, and after-sales operations.</li><li>Monitor key business metrics related to safety, quality, cost, schedule, and customer satisfaction.</li></ul><p><strong>Technical &amp; Project Leadership</strong></p><ul><li>Provide leadership on aluminium faade systems including curtain walls, structural glazing, cladding, louvres, canopies, and specialist faade solutions.</li><li>Lead design reviews, value engineering, technical approvals, and quality assurance processes.</li><li>Oversee multiple large-scale faade projects from design through installation and handover.</li><li>Ensure compliance with international faade standards, building codes, and industry best practices.</li></ul><p><strong>Commercial &amp; Contract Management</strong></p><ul><li>Lead bid strategy, pricing, risk assessment, and contract negotiations.</li><li>Manage claims, variations, extensions of time, final accounts, and contractual obligations.</li><li>Ensure effective cash flow management, payment collections, and commercial governance.</li></ul><p><strong>Client &amp; Business Development</strong></p><ul><li>Build and maintain relationships with developers, consultants, contractors, and key stakeholders.</li><li>Lead major bids, presentations, and strategic business development initiatives.</li><li>Identify growth opportunities across commercial, residential, hospitality, infrastructure, and mixed-use sectors.</li></ul><p><strong>Supply Chain &amp; Market Expansion</strong></p><ul><li>Develop strategic supplier partnerships and optimize procurement performance.</li><li>Support expansion into new markets through business development, partnerships, and operational setup.</li></ul><p><strong>Team Leadership</strong></p><ul><li>Lead and mentor teams across engineering, projects, procurement, commercial, and operations functions.</li><li>Build a culture of accountability, technical excellence, safety, and continuous improvement.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Engineering or a related discipline.</li><li>15+ years of experience in Aluminium &amp; Faade Industry.</li><li>Proven experience managing P&amp;L and leading large-scale faade businesses.</li><li>Strong exposure to Curtain Wall, Structural Glazing, Cladding, Building Envelope, and Architectural Metal Works.</li><li>Extensive experience in project execution, commercial management, and stakeholder engagement.</li><li>GCC/Middle East experience preferred.</li><li>Strong leadership, business development, negotiation, and strategic planning capabilities.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electrical Inspector is responsible for inspecting and monitoring electrical installation works to ensure compliance with approved drawings, technical specifications, quality standards, and project requirements. Conducts site inspections of power distribution, lighting, low-current systems, and related electrical infrastructure, verifies installation quality, identifies non-conformances, and coordinates with contractors and consultants to ensure works are completed safely and in accordance with applicable codes, standards, and regulations.</p><br><br><p>Hill International, with more than 4,300+ professionals in over 100 offices worldwide, provides program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. Engineering News-Record magazine recently ranked Hill as one of the largest program management firms in the world. For more information on Hill, please visit our website at&nbsp;www.hillintl.com.</p><br><p>Hill is exclusively a program, project, and construction management provider, meaning we have one focus as a company: protecting client interests. Free of any potential conflicts, our entire business is geared towards helping clients achieve their desired outcomes. We are dedicated to exceeding expectations throughout the entire construction project lifecycle and adapt to the needs of each assignment to develop tailored approaches and solutions to meet those needs.</p><br><p>Hill is a GISI Consulting Group company, part of the Global Infrastructure Solutions, Inc. (GISI) family of companies. Learn more about GISI Consulting Group at&nbsp;www.gisiconsulting.com.</p><br><p><b>Hill International is an Equal Opportunity Employer/Veteran/Disabled</b><br><u>Note</u>:&nbsp;<i>This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities and other essential functions to be carried out as part of fulfilling the role mentioned in the job title. Various other duties as required.</i></p><br><br>Responsibilities:<br><ul><li><p><span><span>Inspect installation of LV/MV electrical systems, conduits, panels, and terminations.</span></span></p><br></li><li><p><span><span>Ensure compliance with approved electrical drawings and specifications.</span></span></p><br></li><li><p><span><span>Verify IRs are aligned with work completion and readiness for inspection.</span></span></p><br></li><li><p><span><span>Monitor correct installation of cable trays, earthing systems, and devices.</span></span></p><br></li><li><p><span><span>Ensure fire alarm, data, lighting control, and power systems meet quality standards.</span></span></p><br></li><li><p><span><span>Witness testing and commissioning activities including insulation resistance, continuity, and grounding.</span></span></p><br></li><li><p><span><span>Raise NCRs and track rectification measures related to electrical works.</span></span></p><br></li><li><p><span><span>Coordinate closely with mechanical and architectural inspectors on shared spaces and false ceiling areas.</span></span></p><br></li><li><p><span><span>Ensure adherence to local electrical codes (e.g., IEC, NEC) and safety regulations.</span></span></p><br></li><li><p><span><span>Document and report inspection findings and contractor performance.&nbsp;</span></span></p><br></li><li><p><span><span>Perform other duties as assigned by the line manager/supervisor.</span></span></p><br></li></ul><br>Qualifications:<br><ul><li><span><span>Diploma or Degree in Electrical Engineering.</span></span></li><li><span><span>7+ years of inspection experience in complex projects (theme parks, hospitals, or airports preferred).</span></span></li><li><span><span>Familiarity with ride systems, show lighting, and life safety electrical systems is a plus.</span></span></li><li><span><span>Strong understanding of testing protocols and international electrical standards.</span></span></li></ul> </div>

<p><h4>Position summary</h4> <p>Follow all company policies and procedures; protect company assets. Address guests’ service needs. Exchange information with other employees using electronic devices. Develop and maintain positive working relationships with others.</p> <p>Communicate with other IS personnel to troubleshoot and resolve technical problems or issues related to computer software and systems, internet access, hardware and peripheral equipment. Refer major problems or defective products to vendors or technicians. Respond to program error messages by finding and correcting problems or terminating the program. Enter commands and activate controls on computer and peripheral equipment. Inspect, test, and diagnose computer equipment and systems. Maintain inventory of all technology devices. Maintain computer networks, support server system(s), and supporting software. Provide network communications support. Maintain and upgrade hardware, software and website technical architecture related to hardware and telecommunication connectivity. Perform system backups. Provide end-user support. Manage user accounts, including set up, removal, and resetting passwords in order to ensure confidentiality and proper use. Install, configure, and modify workstations. Modify workstations, including set up of cables, desktop computers, laptops, docking stations, and printers. Read technical manuals, confer with users, or conduct computer diagnostics to investigate and resolve problems or to provide technical assistance and support. Secure all backup tapes and computer/telephone rooms. Educate users regarding procedures for securing Personal Identifiable Information (PII). Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> At least 1 year of related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>