وظائف مهندس مواد

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>JOB PURPOSE:</b></p> <p><b>Electric work for ship repair</b></p> <p><b>KEY ACCOUNTABILITIES:</b></p> <p>Description</p> <p>Day-to-Day Operations</p> <p>Plan and organized materials, tools and other resources require to undertake works where nominated</p> <p>Implement safety procedure on the work site accordance with ODC rules and regulations</p> <p>Accept responsibility for the day-to-day activities require and undertaken at the work site</p> <p>Assist with instrument/electrical operational checkout</p> <p>Workmanship must meet the ODC quality standard</p> <p>Installation, maintenance and repair of electrical equipment and associated control devices</p> <p>Co-operate with co-workers including Senior/ Foreman in creating smooth work flow, including assisting with each other work when necessary</p> <p>Instruct and direct subordinates as required</p> <p>Assist in testing, installation and commissioning of electrical/instrumentation equipment</p> <p>Maintain and compile relevant records on maintenance and repair works</p> <p>Provide feedback about the efficiency and operation of the systems installed and maintenance to the management when requested</p> <p>Worked to be completed within agreed time tables</p> <p>Unauthorized works are not being undertaken</p> <p>Attitude to other employees/contractors to be co-operative/positive and harmony to be maintained</p> <p>Adherence to working time and obligations to occupational health and safety act</p> <p>Show proper care and maintenance of hand tools and equipment and plant given by the ODC and obliged to show for the given tools and bags when inspections needed by the engineer/ in charge</p> <p>Responsibility for workplace activities accepted within agreed delegation and cleans the place of work before and after completion of the work</p> <p>Adherence to mobile use policy according to regulation at ODC</p> <p>Implemented the Business Ethics and Core Values of the Department are in proper manner</p> <p>Carrying out and controlling/Supervision of the repair work of Electric motor, lighting, cable change, Switch board cleaning etc.</p> <p>Prepare and study technical drawings, specifications of electrical systems to ensure that Installation and operations conform to standards and customer requirements.</p> <p>Carrying out and controlling/Supervision of Navigation and communication system etc.</p> <p>Attending on board meeting in daily basis during project period.</p> <p>Identify all the jobs from day one and prepare the repair plan accordingly.</p> <p>Troubleshoot and provide technical advice to the foremen on project, from starting to completion Of the repair works to support them in achieving their jobs.</p> <p>Follow up safety rules and regulations, orders by Superiors.</p> <p>Provide complete and accurate reports to Superior on duty</p> <p>May work without supervision on the night shift, if required</p> <p>Perform any other duties as needed to facilitate smooth operations at the discretion of Line Manager </p> <p>Quality, Health, Safety, &amp; Environment</p> <p>Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products / services and responsible environmental attitude</p> <p>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</p> <p>Minimum Qualifications:</p> <p>Bachelor s degree in electrical engineering or naval architecture or equivalent</p> <p>Minimum Experience:</p> <p>3 - 5 years experience with minimum 3 years of experience in marine industry</p> <p>Skills</p> <p>Requires a good understanding of general mechanical drawing, mechanical process and sequence drawing</p> <p>Requires good skill in Word, Excel, Power point etc.</p> <p> </p> <p>Good communication and interpersonal skill in English is a must</p> <p> </p> <p>Exposure to ISO 9001-2000 standards</p> <p> </p> <p><br></p> <p> </p> <p> </p></div></section>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring two business analysts to sit at the engine room of the programme. A regulated financial market infrastructure being built from a blank sheet generates an enormous volume of design, process, and operational documentation that needs to be produced, standardised, kept current, and used to drive downstream artefacts including test plans, training materials, runbooks, and regulatory submissions.</p> <p>This programme operates as a highly AI-leveraged programme office, with Claude adopted as the standard productivity tool. The business analyst is the human who knows the business, knows the documentation standards, prompts Claude well, and rigorously checks and refines its output. The principle is clear: AI is the servant, never the master. Human accountability for accuracy, judgement, and domain interpretation is non-negotiable.</p> <h4>What the role covers</h4> <ul> <li>Producing, structuring, and maintaining the programme's delivery documentation: process maps, workflow diagrams, design documents, decision logs, operational procedures, runbook drafts, training materials, and papers</li> <li>Driving consistency of documentation across the programme: common templates, terminology, structure, and version control</li> <li>Operating as a skilled user of Claude: prompting effectively, iterating, refining, and treating AI output as a first draft to be improved, never as a finished product</li> <li>Identifying opportunities to use AI to compress effort across the programme, for example generating test plans from design documents or training material from runbooks</li> <li>Mapping current-state and target-state processes across the operating model in collaboration with the product owner, operations lead, head of operations control, and other business owners</li> <li>Maintaining the programme RAID log; supporting the project manager on plan maintenance, dependency tracking, and status reporting</li> <li>Generating test artefacts from upstream design documentation: test plans, test cases, test data requirements, and traceability matrices</li> <li>Absorbing domain knowledge actively: how a CSD works, how settlement happens, how registry is maintained, how corporate actions flow, and what the regulator requires</li> </ul> <h4>Requirements</h4> <h4>Who we are looking for</h4> <ul> <li>At least three years in a business analyst, process analyst, or documentation-heavy role, ideally in financial services or another regulated industry. Strong process mapping and documentation skills: able to translate verbal discussion into clear, structured written output.</li> <li>Fast learner: able to absorb new domain knowledge quickly and use it accurately. High proficiency in Microsoft Office and standard process-mapping tools (Visio, Lucidchart, Miro, or equivalent). Fluent in English.</li> <li>Demonstrable, hands-on fluency with Claude or equivalent large language models as a productivity multiplier in real work is required. Candidates should be able to describe specific examples. Candidates without prior Claude experience but with strong evidence of fast AI adoption will be considered.</li> <li>Exposure to financial market infrastructure or capital markets and post-trade processes is an advantage. So is experience producing documentation subject to regulatory inspection or external audit.</li> </ul> <h4>What this is</h4> <p>This is a hands-on, productive role for fast learners who want to operate at the frontier of how a modern programme office works. The post-holder will not be a passive note-taker. They will be expected to absorb domain knowledge quickly, drive their own work, and continuously raise the standard and consistency of programme documentation. If that is the way you work and you have the AI fluency and documentation discipline to back it up, this is worth a conversation.</p></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring two business analysts to sit at the engine room of the programme. A regulated financial market infrastructure being built from a blank sheet generates an enormous volume of design, process, and operational documentation that needs to be produced, standardised, kept current, and used to drive downstream artefacts including test plans, training materials, runbooks, and regulatory submissions.</p> <p>This programme operates as a highly AI-leveraged programme office, with Claude adopted as the standard productivity tool. The business analyst is the human who knows the business, knows the documentation standards, prompts Claude well, and rigorously checks and refines its output. The principle is clear: AI is the servant, never the master. Human accountability for accuracy, judgement, and domain interpretation is non-negotiable.</p> <h4>What the role covers</h4> <ul> <li>Producing, structuring, and maintaining the programme's delivery documentation: process maps, workflow diagrams, design documents, decision logs, operational procedures, runbook drafts, training materials, and papers</li> <li>Driving consistency of documentation across the programme: common templates, terminology, structure, and version control</li> <li>Operating as a skilled user of Claude: prompting effectively, iterating, refining, and treating AI output as a first draft to be improved, never as a finished product</li> <li>Identifying opportunities to use AI to compress effort across the programme, for example generating test plans from design documents or training material from runbooks</li> <li>Mapping current-state and target-state processes across the operating model in collaboration with the product owner, operations lead, head of operations control, and other business owners</li> <li>Maintaining the programme RAID log; supporting the project manager on plan maintenance, dependency tracking, and status reporting</li> <li>Generating test artefacts from upstream design documentation: test plans, test cases, test data requirements, and traceability matrices</li> <li>Absorbing domain knowledge actively: how a CSD works, how settlement happens, how registry is maintained, how corporate actions flow, and what the regulator requires</li> </ul> <h4>Requirements</h4> <h4>Who we are looking for</h4> <ul> <li>At least three years in a business analyst, process analyst, or documentation-heavy role, ideally in financial services or another regulated industry. Strong process mapping and documentation skills: able to translate verbal discussion into clear, structured written output.</li> <li>Fast learner: able to absorb new domain knowledge quickly and use it accurately. High proficiency in Microsoft Office and standard process-mapping tools (Visio, Lucidchart, Miro, or equivalent). Fluent in English.</li> <li>Demonstrable, hands-on fluency with Claude or equivalent large language models as a productivity multiplier in real work is required. Candidates should be able to describe specific examples. Candidates without prior Claude experience but with strong evidence of fast AI adoption will be considered.</li> <li>Exposure to financial market infrastructure or capital markets and post-trade processes is an advantage. So is experience producing documentation subject to regulatory inspection or external audit.</li> </ul> <h4>What this is</h4> <p>This is a hands-on, productive role for fast learners who want to operate at the frontier of how a modern programme office works. The post-holder will not be a passive note-taker. They will be expected to absorb domain knowledge quickly, drive their own work, and continuously raise the standard and consistency of programme documentation. If that is the way you work and you have the AI fluency and documentation discipline to back it up, this is worth a conversation.</p></p><p></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Principal safety engineer</h4> <p>Minimum of 20 years total experience in engineering or consultancy of oil and gas facilities, including a minimum of 15 years’ experience in TSE in onshore oil and gas facilities with demonstrated TSE deliverables development and assurance experience (BP, Shell, PDO projects experience is mandatory).</p> <ul> <li>Track record of managing major oil and gas engineering projects as lead safety engineer (CAPEX > 100 million USD) spanning various project life cycle stages such as feasibility, concept, FEED, execute, project to asset transition.</li> <li>Demonstrated experience in development and assurance of:</li> <ul> <li>HSE philosophy, fire and gas philosophy, F & G cause and effects, F & G layouts, F & G mapping.</li> <li>FEA/FGDEA, flare radiation and dispersion studies, safety equipment layouts, input to facility layouts/facility siting and layout studies, EPZ calculation, QRA. Experience/conducted studies using Shell FRED, SHEPHERD software and/or other PEM/risk integration software. Formal certification preferred.</li> <li>Hazardous area classification, critical element identification, performance standards, bow ties.</li> <li>ALARP (as low as reasonably practicable), design HSE case, operations HSE case, AIPSM (asset integrity-process safety management) and HEMP (hazard and effect management process).</li> <li>Loss prevention aspects such as fire safety, fire protection design (FW demand, hydraulics, surge, PFDs/P & IDs, etc.), escape and fire fighting design.</li> <li>Human factors engineering studies experience (valve criticality, HFE screening, etc).</li> </ul> <li>Facilitated/led workshops for technical safety, which may include but not be limited to HAZID, HAZOP, bowties, ALARP demonstration, MOPO/SIMOPs workshop, SCE identification workshops, DEM1/DEM2/LFI screenings and demonstrations and other HEMP studies.</li> <li>Adequate involvement in safeguarding reviews such as design review, HAZOP, IPF, etc.</li> <li>Involvement in vendor documents evaluations (e.g. technical bid evaluation, datasheets/specifications/MR).</li> </ul> <p>Bachelor’s degree in chemical, mechanical or process safety engineering.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a Senior Piping Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. This role is to supervise a team of piping engineers and designers to translate the limited information from the Concept Selection Report and/or Basis for Design to Basis for Design and/or Front End Design &amp; project specifications as well as detailed design.</p> <p>Supervise a team of piping engineers to carry out the Piping Engineering FEED and DD activities (Define and Execute stage) for an assigned area of a specific project in order to generate the relevant Piping Engineering FEED and DD deliverables on time according to DCAF requirements.<br> </p> <div> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com <br></div> <div> <br> </div> <div> <b>Diversity Statement </b> </div> <div> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br></div> <p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Experience</strong> </p> <ul> <li>TA 2</li> <li>Minimum 6 years in FEED and DD /ENGINEERING and Minimum 10 years in oil &amp; gas Experience.</li> <li>Good communicator and good inter-personal/leadership skills.</li> <li>Experience in managing small teams and third part contractor/licensor.</li> <li>Fluent in English; Written and Spoken.<br> </li> </ul> <p> <strong>Designing the future. Transforming the world</strong> </p> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p> <p> <strong>What we can offer</strong> </p> <ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors </li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li>Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li> </ul> <p> <strong>Responsibilities</strong> </p> <ul> <li>Prepare Piping Engineering Cost, Time and Resource (CTR) Catalogue for projects</li> <li>Supervise a team of piping engineers and Designer assigned to a project area (supervised by Project piping Lead)</li> <li>Contribute to Basis for Design, Basis of Design, and Project Specifications/Philosophies</li> <li>Develop Equipment Layout/Plot Plan based on PFS/UFS, Technical safety requirements</li> <li>Develop Piping Layout based on PEFS/UEFS</li> <li>Carry out Stress Analysis for critical lines</li> <li>Select / Develop piping classes based on MSR</li> <li>Develop / Approve specification for piping materials and speciality items</li> <li>Follow Quality Management System (QMS) requirements in line with ISO 9001-2015 and API Q2 2nd edition requirements.</li> <li>Initiate, check, and/or approve Piping Engineering Deliverables</li> <li>Provide input / Review other discipline deliverable as appropriate.</li> <li>Conduct Layout Review / Model Reviews and ensure timely close-out of all actions.</li> <li>Support procurement and construction activities.</li> <li>Participate in HAZID, Design Review, HAZOP, IPF and various HSE related workshop<br> </li> </ul> <p> </p></div></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Job purpose</h4> <p>To maximize and add value to the construction process by proactive involvement in quantity and cost management and reporting. To carry out monthly cost reviews on projects and forecast final forecast values for contract and project costs. Maximize value of monthly applications and measurement and submission of contract variations. Assist Contracts department in timely submission of final accounts to the client and subcontractors.</p> <h4>Key responsibilities</h4> <ul> <li>To carry out monthly valuations of work in progress/value of work done (VOWD)</li> <li>Certification of subcontractor monthly valuations and final accounts</li> <li>Measure, value, submit contract variations</li> <li>Ongoing quantity measurement and re-measurement activities and reporting</li> <li>Strong working knowledge of project schedules and impact of activity duration changes and forecast completion dates</li> <li>Assist Contracts department to prepare, submit and negotiate project final accounts</li> <li>Ensure that business commercial processes are adhered to at project level</li> <li>Manage and produce accurate formal reports in accordance with project timetable and deadlines</li> <li>Monitor all commercial information in relation to project including labour, material and sub-contractor cost forecasting thus ensuring budgets adhered to</li> <li>Supply all relevant information for review at the specified intervals set</li> <li>Assist Project Controls Manager / Lead Cost Engineer with a range of other duties as may be required from time to time</li> </ul> <h4>Skills and attributes</h4> <ul> <li>Technically qualified in Quantity Surveying / Cost Management or similar. Consideration given to relevant experience</li> <li>Approximately 3-6 years’ quantity surveying experience within an oil and gas contracting/service provider organisation</li> <li>Commercially astute, numerate, risk averse and able to accurately forecast cost</li> <li>Multi-tasking, self-motivated, energetic team player with a flexible and adaptable approach to work</li> <li>Have good practical organisation skills, planning of resources and programme scheduling</li> <li>Be able to provide both summarised and detailed reports on current activities</li> <li>IT literate able to use Microsoft Office, in particular Microsoft Excel</li> <li>Demonstrable experience in EPC/EPCM contracts</li> <li>Able to work well within a team based environment</li> <li>Communicate regularly with project staff and specialist subcontractors to ensure commercial controls are in place, understood and followed at all times</li> <li>Good command of written and spoken English</li> <li>Customer focused with ability to communicate across all levels of seniority from the workface through to senior management level</li> <li>‘Can do’ attitude</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>We have an opening for an HSSE Engineer with specialized expertise in Process Safety Management (PSM) and Fire safety, along with relevant experience in similar industries and operational environments. Please find below the key requirements and preferences for this role.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Position Requirements</strong></p><br><ul><li><p>PSM background with strong HSE expertise (primary focus)</p></li><li><p>Mechanical Engineering or Fire Safety Engineering qualification preferred</p></li><li><p>Proven experience in a similar role within the petrochemical, polymer, PET, or related process industries</p></li><li><p>Strong knowledge of fixed fire detection and fire protection systems</p></li><li><p>SAP and other relevant software knowledge</p></li><li><p>Experience leading and managing teams</p></li><li><p>Quality-driven mindset with strong operational focus</p></li><li><p>Strong stakeholder management and leadership capabilities</p></li></ul><br><p>Please note that expectations from global, regional, site management, and operations leadership for this role are exceptionally high.</p><br><p><strong>Compensation & Benefits</strong></p><ul><li><p>Salary: Up to <strong>OMR 1,350 per month</strong></p></li></ul><p>Family benefits provided</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring an experienced Water Desalination Plant Engineer for a reputed company in Oman. The ideal candidate should have hands-on experience in the installation, operation, maintenance, and design of water desalination plants, along with strong mechanical engineering knowledge.</p><p>Key Responsibilities</p><ul><li>Install, assemble, and commission water desalination plants.</li><li>Perform operation and maintenance of desalination systems.</li><li>Read and interpret technical drawings and engineering documents.</li><li>Prepare technical reports and maintenance records.</li><li>Troubleshoot plant equipment and ensure smooth operations.</li><li>Follow safety and quality standards during all activities.</li></ul><p>Salary: 74000 INR Per Month</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements</p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 4 years of experience in water desalination plant operation and maintenance.</li><li>Experience in installation and design of desalination plants.</li><li>Ability to read technical drawings and prepare reports.</li><li>Good English communication skills.</li><li>Age: Below 40 years.</li></ul><p></p></section>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</li><li>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</li><li>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</li><li>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</li><li>Contribute to monthly production planning and reservoir-surveillance planning as required.</li><li>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</li><li>Participate in integrated field studies for maturing hydrocarbon resources.</li><li>Evaluate well and reservoir performance and recommend production-improvement opportunities.</li><li>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</li><li>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</li><li>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</li><li>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</li><li>Fulfil stand-by / on-call duties when required.</li><li>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</li><li>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</li></ul><p><strong>Notable Working Conditions</strong></p><p>Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Language requirements Excellent knowledge of written, read, and spoken English (required).</li></ul><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Storekeeper is responsible for managing all site store activities, ensuring the efficient receipt, storage, control, and issuance of materials, tools, and equipment required for project execution. The role ensures inventory accuracy, material availability, compliance with company procedures, and adherence to HSE and quality standards.</p><p><strong>Key Responsibilities</strong></p><ul><li><strong>Inventory Control</strong> Maintain accurate inventory records for all materials, consumables, tools, and equipment. Monitor stock levels and initiate replenishment requests when required. Conduct periodic stock counts and inventory reconciliations. Ensure proper tracking of material movements and inventory transactions.</li><li><strong>Receiving &amp; Issuing Materials</strong> Receive materials delivered to site and verify quantities against purchase orders and delivery notes. Inspect received materials for quality, specifications, and potential damages. Coordinate with procurement and site teams regarding discrepancies or non-conforming materials. Issue materials to authorized personnel and maintain proper documentation.</li><li><strong>Storage Management</strong> Ensure proper storage, identification, and preservation of materials in accordance with company procedures and manufacturer recommendations. Maintain a clean, organized, and secure store environment. Implement suitable storage practices to prevent damage, loss, or deterioration of materials.</li><li><strong>Documentation &amp; Reporting</strong> Maintain all store-related records, including goods receipt notes, material issue vouchers, stock registers, and inventory reports. Update inventory records and ERP systems in a timely and accurate manner. Prepare periodic inventory and stock movement reports for management review. Support internal and external audits by providing accurate documentation and inventory records.</li><li><strong>HSE &amp; Compliance</strong> Comply with BESIX Group HSE policies, procedures, and project requirements. Ensure safe handling, storage, and disposal of materials where applicable. Maintain housekeeping standards within the warehouse and storage areas. Promote a culture of safety, quality, and operational excellence.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><ul><li>Education Diploma or equivalent qualification in Logistics, Supply Chain, Business Administration, or a related field. Bachelor's degree is considered an advantage.</li><li>Experience Minimum 5 years of relevant experience in storekeeping, warehouse operations, or inventory management within the construction industry. Experience working on large-scale construction, infrastructure, or industrial projects is preferred.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Good knowledge of storekeeping procedures, inventory control, and warehouse operations.</li><li>Familiarity with construction materials, equipment, and tools.</li><li>Proficiency in Microsoft Office applications, particularly Excel.</li><li>Experience using ERP systems and inventory management software.</li></ul><p><strong>Behavioural Competencies</strong></p><ul><li>Strong organizational and planning skills.</li><li>High level of accuracy and attention to detail.</li><li>Effective communication and coordination skills.</li><li>Ability to work under pressure and manage multiple priorities.</li><li>Team player with a proactive and solution-oriented mindset.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the MS&D supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environmental Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p> <h4>Compensation details</h4> <p>Hourly and additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 04/27/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> Job Description<br> <br> EMPLOYEE JOB DESCRIPTION JOB PURPOSE: Electric work for ship repair KEY ACCOUNTABILITIES: Description Day-to-Day Operations Plan and organized materials, tools and other resources require to undertake works where nominated Implement safety procedure on the work site accordance with ODC rules and regulations Accept responsibility for the day-to-day activities require and undertaken at the work site Assist with instrument/electrical operational checkout Workmanship must meet the ODC quality standard Installation, maintenance and repair of electrical equipment and associated control devices Co-operate with co-workers including Senior/ Foreman in creating smooth work flow, including assisting with each other work when necessary Instruct and direct subordinates as required Assist in testing, installation and commissioning of electrical/instrumentation equipment Maintain and compile relevant records on maintenance and repair works Provide feedback about the efficiency and operation of the systems installed and maintenance to the management when requested Worked to be completed within agreed time tables Unauthorized works are not being undertaken Attitude to other employees/contractors to be co-operative/positive and harmony to be maintained Adherence to working time and obligations to occupational health and safety act Show proper care and maintenance of hand tools and equipment and plant given by the ODC and obliged to show for the given tools and bags when inspections needed by the engineer/ in charge Responsibility for workplace activities accepted within agreed delegation and cleans the place of work before and after completion of the work Adherence to mobile use policy according to regulation at ODC Implemented the Business Ethics and Core Values of the Department are in proper manner Carrying out and controlling/Supervision of the repair work of Electric motor, lighting, cable change, Switch board cleaning etc. Prepare and study technical drawings, specifications of electrical systems to ensure that Installation and operations conform to standards and customer requirements. Carrying out and controlling/Supervision of Navigation and communication system etc. Attending on board meeting in daily basis during project period. Identify all the jobs from day one and prepare the repair plan accordingly. Troubleshoot and provide technical advice to the foremen on project, from starting to completion Of the repair works to support them in achieving their jobs. Follow up safety rules and regulations, orders by Superiors. Provide complete and accurate reports to Superior on duty May work without supervision on the night shift, if required Perform any other duties as needed to facilitate smooth operations at the discretion of Line Manager &nbsp; Quality, Health, Safety, &amp; Environment Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products / services and responsible environmental attitude &nbsp; &nbsp; QUALIFICATIONS, EXPERIENCE &amp; SKILLS: Minimum Qualifications: Bachelor’s degree in electrical engineering or naval architecture or equivalent Minimum Experience: 3 - 5 years experience with minimum 3 years of experience in marine industry &nbsp; Skills Requires a good understanding of general mechanical drawing, mechanical process and sequence drawing Requires good skill in Word, Excel, Power point etc. Good communication and interpersonal skill in English is a must Exposure to ISO 9001-2000 standard<br> <br><b> Job Requirements</b><br><b> Minimum Qualification :<br></b> Bachelor Degree<br><b> Experience :<br></b> You should have Experience of Minimum 3 years to apply for this Job<br><br></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Warehouse Coordinator</strong><br> <strong>Position Overview:</strong><br> We are seeking a detail-oriented and proactive Warehouse Coordinator to manage the flow and storage of materials on site, ensuring smooth operations and compliance with a Large- scale construction project. This role is key to supporting construction activities by maintaining accurate inventory, overseeing material handling, and facilitating effective communication between logistics, site teams, and contractors.&nbsp;<br> <strong>Key Responsibilities:</strong><br><ul><li>Manage all material activities on site, including receipt, storage, preservation, and delivery to contractors, adhering strictly to Material Management Procedures.</li><li>Operate and maintain the AMUSE system for tracking material movements and inventory.</li><li>Coordinate with site security to regulate truck entry, ensuring organized and safe vehicular traffic flow within the site premises.</li><li>Organize and supervise unloading of materials upon arrival, engaging suitable subcontractors to ensure efficiency.</li><li>Verify incoming materials meet required quantity and quality standards, cross-checking against certificates and documentation.</li><li>Allocate and maintain designated storage areas based on a strategic storage allocation plan for optimal warehouse organization.</li><li>Keep detailed and up-to-date records of all materials received, stored, withdrawn, and handed over, including material certificates, orders, invoices, customs documents (if applicable), and material requisitions.</li><li>Monitor availability of materials to support definition and progress of work fronts.</li><li>Report any occurrences of damaged or lost materials promptly to the Project Manager and Construction Manager.</li><li>Archive material certificates and ensure bulk materials are accurately identified following PMI color coding systems (if applicable).</li><li>Initiate back charges to vendors where necessary and prepare supporting documentation for management review and action.</li><li>Maintain the preservation of equipment and materials in line with prescribed procedures.</li><li>Record daily hours worked by warehouse personnel and assist in manpower tracking to optimize warehouse operations.</li><li>Prepare and provide lists of spare parts to be handed over to the client upon project completion.</li></ul><strong>Qualifications:</strong><br><ul><li>Minimum of 5 years’ experience in construction site material management or warehouse coordination.</li><li>Proficient in English, both spoken and written, to ensure clear communication across teams.</li><li>Strong organizational and multitasking skills with keen attention to detail.</li><li>Ability to work effectively on-site and adapt to dynamic project environments.</li><li>Familiarity with material management systems, preferably AMUSE or similar inventory management software.</li><li>Understanding of quality assurance requirements related to construction materials.</li></ul><strong>What We Offer:</strong><br><ul><li>Opportunity to play a critical role in large-scale construction projects and contribute to their successful delivery.</li><li>Exposure to advanced material management systems and best practices in site logistics.</li><li>Collaborative work environment with open communication channels across project teams.</li><li>Professional growth prospects within a dynamic and fast-paced industry.</li><li>Competitive compensation package commensurate with experience.</li></ul>If you are a motivated individual with solid experience managing construction site warehouses and materials, and you are ready to take on a hands-on role in a challenging environment, we encourage you to apply.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Purpose The Storekeeper is responsible for managing all site store activities, ensuring the efficient receipt, storage, control, and issuance of materials, tools, and equipment required for project execution. The role ensures inventory accuracy, material availability, compliance with company procedures, and adherence to HSE and quality standards. Key Responsibilities Inventory Control Maintain accurate inventory records for all materials, consumables, tools, and equipment. Monitor stock levels and initiate replenishment requests when required. Conduct periodic stock counts and inventory reconciliations. Ensure proper tracking of material movements and inventory transactions. Receiving &amp; Issuing Materials Receive materials delivered to site and verify quantities against purchase orders and delivery notes. Inspect received materials for quality, specifications, and potential damages. Coordinate with procurement and site teams regarding discrepancies or non-conforming materials. Issue materials to authorized personnel and maintain proper documentation. Storage Management Ensure proper storage, identification, and preservation of materials in accordance with company procedures and manufacturer recommendations. Maintain a clean, organized, and secure store environment. Implement suitable storage practices to prevent damage, loss, or deterioration of materials. Documentation &amp; Reporting Maintain all store-related records, including goods receipt notes, material issue vouchers, stock registers, and inventory reports. Update inventory records and ERP systems in a timely and accurate manner. Prepare periodic inventory and stock movement reports for management review. Support internal and external audits by providing accurate documentation and inventory records. HSE &amp; Compliance Comply with BESIX Group HSE policies, procedures, and project requirements. Ensure safe handling, storage, and disposal of materials where applicable. Maintain housekeeping standards within the warehouse and storage areas. Promote a culture of safety, quality, and operational excellence.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Education Diploma or equivalent qualification in Logistics, Supply Chain, Business Administration, or a related field. Bachelor's degree is considered an advantage.</p><p>Experience Minimum 5 years of relevant experience in storekeeping, warehouse operations, or inventory management within the construction industry. Experience working on large-scale construction, infrastructure, or industrial projects is preferred.</p><p>Technical Competencies Good knowledge of storekeeping procedures, inventory control, and warehouse operations. Familiarity with construction materials, equipment, and tools. Proficiency in Microsoft Office applications, particularly Excel. Experience using ERP systems and inventory management software.</p><p>Behavioural Competencies Strong organizational and planning skills. High level of accuracy and attention to detail. Effective communication and coordination skills. Ability to work under pressure and manage multiple priorities. Team player with a proactive and solution-oriented mindset.</p><p>Flexibility &amp; Mobility Demonstrates flexibility and adaptability to support the operational needs of the business across different projects and locations. Willing to be assigned, transferred, or mobilized to other BESIX projects within the region based on project requirements and business priorities. Able to work in diverse project environments and support site operations as required. Maintains a proactive and collaborative approach when transitioning between projects, teams, and locations.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As part of the technical team, responsible for ensuring the appropriate cable designs for each project considering OCI s needs and capabilities, and the customers needs. Summary of the Job Role : Working on the commercial enquiry (Pre &amp; Post Order). Design cables in accordance with the parameters provided by applicable standards, customers and OCI. To support OCI s strategic goals and department KPI. Key Deliverables: PRE ORDER Understand the technical requirements of the customer in terms of cable and design the cable as per the project requirements. Analyze the customer needs with respect OCI product range &amp; provide the feedback. Support to Commercial team in timely response to customer enquiry with issuing the SAP codes, Technical documents like Datasheet (TDS), Cable Drawing (AutoCAD &amp; SolidWorks) and Clarification-deviation sheet. Preparation of BOM (Bill of Materials), TDS &amp; verify with specification s fictitious calculation &amp; manufacturing values. Preparation of CA Items, verify with the specification s design guidelines and manufacturing instructions. POST ORDER Ensure the final item codes, special instructions &amp; other technical information are provided as per final approved documents. DATA BASE Review &amp; issue Cable Datasheet, Cross-sectional Drawings &amp; BOM in OCI standard format. Maintaining commonly asked Clarification &amp; Deviation list. Work of Deviation points to comply for future enquiry.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in electrical engineering.</li><li>Knowledge of MS Office (Excel, PPT etc.), AutoCAD &amp; Solid Works.</li><li>Knowledge of Cable design tools.</li></ul><p></p></section>

<p>A hands-on professional responsible for directly supervising and controlling all lifting and rigging operations on site to ensure safe and efficient execution.</p><p><b>Responsibilities</b></p><ul><li>Supervise all lifting operations on site in accordance with approved lifting plans.</li><li>Conduct pre-lift checks on cranes, rigging equipment, and accessories.</li><li>Ensure all lifting gear is inspected, certified, and fit for use.</li><li>Brief crane operators, riggers, and banksmen before each lift.</li><li>Control exclusion zones and ensure unauthorized personnel are kept clear.</li><li>Communicate with crane operators using standard hand signals or radio.</li><li>Monitor ground conditions, weather, and environmental factors during lifts.</li><li>Stop lifting operations immediately if unsafe conditions are observed.</li><li>Ensure correct rigging configurations and load attachment methods are used.</li><li>Maintain daily lifting logs and inspection checklists.</li><li>Report incidents, near-misses, and equipment defects to the Lifting Engineer and HSE team.</li><li>Coordinate with other site supervisors to plan and sequence lifts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Age limit 24-50</p><p>Need Gulf Experience</p>