وظائف مهندس تفتيش هندسي في سلطنة عمان

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p><h4>Description</h4> <p>Remote junior AI engineer – computer vision<br> Location: Remote<br> Employment type: Full-time (8 hours) remotely<br> Experience level: Junior (2+ years)</p> <p>InnovationTeam is a forward-thinking technology company that delivers advanced AI and data-driven solutions across multiple industries. We are currently seeking a junior AI engineer – computer vision to join our AI engineering team.</p> <p>As a junior computer vision engineer at InnovationTeam, you will be responsible for designing, developing, and deploying vision-based AI systems for real-world, production environments. You will work closely with cross-functional teams to build scalable image and video analytics solutions.</p> <p>This position requires strong expertise in computer vision, deep learning, and software engineering. The ideal candidate is technically strong, self-driven, and experienced in taking AI models from research to production.</p> <p>At InnovationTeam, we foster a culture of innovation, collaboration, and technical excellence, offering an environment where junior engineers can make a meaningful impact.</p> <h4>Role overview</h4> <p>We are seeking a skilled AI engineer with a strong focus on computer vision to develop, optimize, and deploy vision-based AI solutions. The role involves working on real-world image and video analytics problems and delivering production-ready AI systems.</p> <h4>Requirements</h4> <ul> <li>Develop and train computer vision models for image and video analysis.</li> <li>Implement solutions for object detection, image classification, segmentation, and tracking.</li> <li>Prepare and manage datasets, including data cleaning, labeling, and augmentation.</li> <li>Optimize models for GPU performance, inference speed, and scalability.</li> <li>Deploy AI models into production using APIs and containerized services.</li> <li>Integrate computer vision models with broader AI and analytics platforms.</li> <li>Collaborate with software engineers, data scientists, and product teams.</li> <li>Maintain documentation and ensure code quality and reproducibility.</li> </ul> <h4>Required skills & qualifications</h4> <ul> <li>Minimum 2 years of hands-on experience in AI, machine learning, or deep learning with a focus on computer vision.</li> <li>Master’s degree in computer science, software engineering, artificial intelligence, engineering, or a related field.</li> <li>Strong knowledge of computer vision concepts and algorithms.</li> <li>Practical experience with CNN-based models and modern computer vision architectures.</li> <li>Proficiency in Python and common ML/CV libraries (PyTorch or TensorFlow, OpenCV).</li> <li>Experience with object detection and segmentation frameworks (e.g., YOLO, Detectron2).</li> <li>Understanding of model evaluation, metrics, and performance optimization.</li> <li>Experience deploying models in cloud or on-premises environments.</li> <li>Familiarity with Docker and basic MLOps practices.</li> <li>Excellent English communication skills (written and spoken).</li> </ul> <h4>Nice to have</h4> <ul> <li>Experience with video analytics or real-time inference.</li> <li>Exposure to vision transformers or multimodal AI.</li> <li>Experience with GPU-based training and inference.</li> <li>Knowledge of cloud platforms (OCI, AWS, Azure, or GCP).</li> <li>Background in domains such as healthcare, smart cities, or industrial AI.</li> </ul> <h4>Benefits</h4> <ul> <li>Work on practical, production-grade computer vision solutions.</li> <li>Access to GPU infrastructure and modern AI tooling.</li> <li>Collaborative, engineering-focused work environment.</li> <li>Opportunities for growth and advanced AI exposure.</li> <li>Competitive compensation package.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring for IT Infrastructure Engineer - Oman Location - Oman Role &amp; Responsibilities- Design and implement complete IT infrastructure setup (LAN/WAN/Wi-Fi). Install, configure, and maintain servers (Windows/Linux). Manage Active Directory, DNS, DHCP, VLAN, Group Policies. Configure and maintain firewall, VPN, and network security. Setup and manage email systems (Microsoft 365 / Google Workspace). Implement data backup and disaster recovery solutions. Configure NAS/SAN storage and monitor capacity. Setup CCTV systems, NVR, and power backup coordination. Install and manage printers, scanners, and biometric systems. Monitor system performance and ensure high availability. Troubleshoot hardware, network, and server issues. Coordinate with vendors for procurement and AMC management. Ensure IT security compliance and regular patch updates. Maintain IT documentation and asset inventory.</p></div></section>

<p><h4>Description</h4> <p>Remote junior AI engineer – computer vision<br> Location: Remote<br> Employment type: Full-time (8 hours) remotely<br> Experience level: Junior (2+ years)</p> <p>InnovationTeam is a forward-thinking technology company that delivers advanced AI and data-driven solutions across multiple industries. We are currently seeking a junior AI engineer – computer vision to join our AI engineering team.</p> <p>As a junior computer vision engineer at InnovationTeam, you will be responsible for designing, developing, and deploying vision-based AI systems for real-world, production environments. You will work closely with cross-functional teams to build scalable image and video analytics solutions.</p> <p>This position requires strong expertise in computer vision, deep learning, and software engineering. The ideal candidate is technically strong, self-driven, and experienced in taking AI models from research to production.</p> <p>At InnovationTeam, we foster a culture of innovation, collaboration, and technical excellence, offering an environment where junior engineers can make a meaningful impact.</p> <h4>Role overview</h4> <p>We are seeking a skilled AI engineer with a strong focus on computer vision to develop, optimize, and deploy vision-based AI solutions. The role involves working on real-world image and video analytics problems and delivering production-ready AI systems.</p> <h4>Requirements</h4> <ul> <li>Develop and train computer vision models for image and video analysis.</li> <li>Implement solutions for object detection, image classification, segmentation, and tracking.</li> <li>Prepare and manage datasets, including data cleaning, labeling, and augmentation.</li> <li>Optimize models for GPU performance, inference speed, and scalability.</li> <li>Deploy AI models into production using APIs and containerized services.</li> <li>Integrate computer vision models with broader AI and analytics platforms.</li> <li>Collaborate with software engineers, data scientists, and product teams.</li> <li>Maintain documentation and ensure code quality and reproducibility.</li> </ul> <h4>Required skills & qualifications</h4> <ul> <li>Minimum 2 years of hands-on experience in AI, machine learning, or deep learning with a focus on computer vision.</li> <li>Master’s degree in computer science, software engineering, artificial intelligence, engineering, or a related field.</li> <li>Strong knowledge of computer vision concepts and algorithms.</li> <li>Practical experience with CNN-based models and modern computer vision architectures.</li> <li>Proficiency in Python and common ML/CV libraries (PyTorch or TensorFlow, OpenCV).</li> <li>Experience with object detection and segmentation frameworks (e.g., YOLO, Detectron2).</li> <li>Understanding of model evaluation, metrics, and performance optimization.</li> <li>Experience deploying models in cloud or on-premises environments.</li> <li>Familiarity with Docker and basic MLOps practices.</li> <li>Excellent English communication skills (written and spoken).</li> </ul> <h4>Nice to have</h4> <ul> <li>Experience with video analytics or real-time inference.</li> <li>Exposure to vision transformers or multimodal AI.</li> <li>Experience with GPU-based training and inference.</li> <li>Knowledge of cloud platforms (OCI, AWS, Azure, or GCP).</li> <li>Background in domains such as healthcare, smart cities, or industrial AI.</li> </ul> <h4>Benefits</h4> <ul> <li>Work on practical, production-grade computer vision solutions.</li> <li>Access to GPU infrastructure and modern AI tooling.</li> <li>Collaborative, engineering-focused work environment.</li> <li>Opportunities for growth and advanced AI exposure.</li> <li>Competitive compensation package.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apprenti-e data engineer F/H F/H</p><br><br><p>Alternance</p><br><br><p>2 ans</p><br><br><p>Etudiant</p><br><br><p>Temps partiel</p><br><br><p>Au sein du département Fleet Data Engineering, le secteur « Fleet Data Science » collecte et analyse les données de fonctionnement, d'opérations et de maintenance des moteurs civils Safran Aircraft Engines. L'équipe « Fleet data Science » s'occupe particulièrement de la modélisation de la fiabilité des moteurs en exploitation. <br>L'équipe est responsable de différents outils qui exploitent les données et qui sont déployés sur différents environnements (on premise et cloud). <br>En tant qu'apprenti-e data engineer, le-la candidat-e aura pour missions : <br>Support au développement de pipelines de données (ETL/ELT) sur AWS (S3, Glue, EMR, Redshift…) et sur des VM on premise <br>Construction et maintenance des modèles et entrepôts de données <br>Optimisation des traitements &amp; automatisation des workflows (CI/CD) <br>Application des bonnes pratiques (qualité, sécurité, scalabilité, RGPD) <br>Collaboration avec les équipes IT et métiers </p><br><br><p>Des avantages proposés : accord télétravail, salle de sport, conciergerie, restauration collective, avantages CSE et couverture frais de santé. <br>Sites accessibles : transport en commun et/ou navettes </p><br><br><p>Etudiant-e en data engineering ou informatique, en recherche d'apprentissage après au minimum BAC+2. Vous avez des connaissances en Python, SQL, pySpark, CI/CD, Airflow, AWS. </p><br><br><br> </div>

<p><h4>Location</h4> <p>Sohar, Oman</p> <h4>Work status</h4> <p>Resident (5 days per week)</p> <h4>Start date</h4> <p>July 2026</p> <h4>Service duration</h4> <p>12 months (renewable)</p> <h4>Qualification</h4> <ul> <li>LNG project experience is a must</li> <li>Process/Chemical engineer with proven experience (more than 10 years) in gas treatment and/or LNG plants detailed design, including licensors</li> <li>Professional experience: several years of proven experience in EPSCC and operation stages of gas treatment projects, including process simulation</li> <li>Strong teamwork and communication skills</li> <li>Knowledge of project development and methods used to submit dossier to state expertise, permitting process, and technical approval</li> <li>Fluent in English</li> </ul> <h4>The service holder is accountable for</h4> <ul> <li>The performance of the LNG plant process in continuity with the detailed engineering results</li> <li>The control of eventual shareholder technical support (cryogenic expert and AGRU licensed expert)</li> <li>Frequent technical alignment between start-up team and field operation when relevant</li> <li>Communication to shareholders for process matters related</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring an experienced Civil Engineer for a reputed company in Oman. The ideal candidate should have hands-on experience in site supervision, project execution, tender bidding, and construction management. Candidates with Gulf experience and strong technical knowledge are encouraged to apply.</p><p>Supervise and manage day-to-day construction site activities. Monitor project execution to ensure work is completed on time and meets quality standards. Prepare and participate in tender bidding and estimation activities. Coordinate with clients, consultants, contractors, and project teams. Ensure compliance with project specifications, safety regulations, and company procedures. Prepare site reports, progress reports, and project documentation. Resolve technical issues at the construction site. Monitor manpower, materials, and equipment utilization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Civil Engineering.</li><li>Minimum 5 years of experience as a Civil Engineer.</li><li>Gulf experience is mandatory.</li><li>Experience in site supervision and tender bidding is essential.</li><li>Good communication skills in English.</li><li>Knowledge of Arabic will be an added advantage.</li><li>Preferred Nationality: Indian.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is currently hiring for a Senior Process Safety Engineer for a secondment role in Muscat Oman. Duration of this assignment is 1 year Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Experience: Minimum 15 years of experience in similar projects Process/Chemical Engineering Degree with relevant certification Experience in refinery and petrochemical projects preferred</p><p>Execute the activities and processes associated with Process Safety Engineering in the NGLE Project, under Process Engineering scope. Apply and expand hands-on experience in Engineering, Procurement, Construction, and commissioning and Operation oil &amp; gas industry. Responsible for supporting and executing general engineering activities directly linked to Process engineering. Designing the future. Transforming the world Reflecting the market focus for the brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in refinery and petrochemical industry.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li><li>Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li></ul><p>Typical responsibilities</p><ul><li>Monitor the execution of the quality assurance program for conformance to project requirements.</li><li>To contribute to the development of optimal business strategies during FEED and ensure the satisfactory execution of NGLE project by achieving the project s technical quality requirements within agreed budgets and schedules.</li><li>Lead the Process Safety Engineering technical detailed design scope to bring out the best strategies and approaches to deliver the technical requirements.</li><li>Prepare the necessary documentation, establishing major methods and data as necessary and ensure selection of the optimum Process Safety design from both technical and economic standpoints.</li><li>Ensure that design methods, standards and data used conform to Asset Owners requirements and/or those issued by Centre of Excellence.</li><li>Ensure the preparation of Process Safety and Operations Philosophy document incorporating user requirements.</li><li>In consultation with Project Delivery Skill-pool, assign appropriate Process Safety engineering resources and monitor performance to ensure all Process Safety Engineering deliverables are accomplished.</li><li>Be responsible for the coordination, execution and progress of Process Safety Engineering design under the supervision of the Lead Engineering.</li><li>Be responsible for technical accuracy, quality and economy of Process Safety engineering applications design.</li><li>Liaise with Vendor s representatives and other functions on all matters relating to Process design and execution.</li><li>Ensure OQ Safety and Quality control procedures are followed during execution of all work and that a high standard of safety is achieved in all design work.</li><li>Participate pre and post contract award in discussions with Asset Owners to assess and assist in the definition of user requirements.</li><li>Review Process Safety Engineering Deliverables and participate in project reviews and workshops.</li><li>Participate in solving Process Safety engineering challenges that are recognised during development of the Front-End Package or detailed engineering</li><li>Identify gaps in existing practices and tools and manage the process of developing new practices or toolkit items that enhance OQ technological offering.</li><li>Other relevant duties as requested from time to time.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience: Minimum 15 years of experience in similar projects Process/Chemical Engineering Degree with relevant certification Experience in refinery and petrochemical projects preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities </p><p><strong>Project Leadership</strong> Lead and manage all aspects of HVAC projects, ensuring alignment with company objectives and client expectations. Develop project plans that define scope, goals, deliverables, and timelines. </p><p><strong>Team Management</strong> Oversee and mentor project teams, fostering a collaborative environment to enhance productivity. Allocate resources effectively, ensuring the right personnel are assigned to tasks. <strong>Client Interaction</strong> Act as the primary point of contact for clients, maintaining strong relationships and ensuring their needs are met throughout the project lifecycle. Prepare and present project proposals, progress reports, and final deliverables to clients. </p><p><strong>Budgeting and Cost Control</strong> Develop and manage project budgets, ensuring costs are controlled and financial goals are met. Conduct regular budget reviews and cost analysis to identify and implement savings. </p><p><strong>Risk Management</strong> Identify potential project risks and develop mitigation strategies to minimize impacts on project delivery. Ensure compliance with health, safety, and environmental regulations. <strong>Quality Assurance</strong> Ensure that all HVAC installations comply with industry standards, local regulations, and client specifications. Conduct site inspections and oversee testing and commissioning activities. </p><p><strong>Documentation and Reporting</strong> Maintain accurate project documentation, including contracts, change orders, and correspondence. Provide regular updates to senior management on project status, challenges, and milestones. </p><p><strong>Continuous Improvement</strong> Stay current with industry trends, technologies, and best practices in HVAC project management. Implement lessons learned and improve processes for future projects. Project Progress monitoring (based on approved budget of the projects)</p><p> <strong>Main Role</strong> Project Planning Document Management Resource Allocation Other parties Engagement Budget Management Progress Monitoring Delivery &amp; Control Quality Assurance &amp; Control Project Closure </p><p><strong>Project Progress Monitoring</strong> Weekly (every Saturday) Progress reports from the projects (from supervisors) Updating Budget Control Sheets Escalation of MH variations Approving Project PRs and Pos Client enquires and preparing the response Handling issues raised by the client Proper Documentation of the issues raised by the client Maintaining the project files (hard and soft information) </p><p><strong>Invoicing </strong>Monthly invoicing (timeline as per approved budget). Making sure the project cost and invoicing cash flows are not in negative. (Exceptions to be approved by MD). </p><p><strong>Customer Relationship Management</strong> Responding to client enquires Following up the client enquires to convert into Work Orders/POs. </p><p><strong>Dispute resolutions (with client)</strong> Invoice related. Project related (QA and Snags) Rate related. Certification. Add value to the Projects </p><p><strong>Qualifications</strong> Bachelor’s degree in Mechanical Engineering, HVAC Engineering, or a related field. Minimum of 15 years of experience in HVAC project management, with a strong track record of successful project delivery. In depth knowledge of HVAC systems, design principles, and relevant codes and standards. Proven leadership and team management skills, with the ability to motivate and guide teams. Excellent communication, negotiation, and interpersonal skills. Proficiency in project management software and tools. </p><p><strong>Other Skills</strong> Excellent leadership, communication, and interpersonal skills. Strong problem solving abilities and decision making skills. Ability to manage multiple projects simultaneously while meeting deadlines and maintaining quality standards. Benefits Performance based bonuses. Professional development opportunities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The Senior HVAC Project engineer is responsible for leading and overseeing HVAC projects from initiation through to completion. This role requires a strong background in HVAC systems and project management, ensuring that projects are delivered on time, within budget, and to the highest quality standards. The ideal candidate will have excellent leadership, communication, and problem-solving skills, enabling them to manage multiple stakeholders and complex project requirements effectively.</p><p></p></section>

<p><h4>Location</h4> <p>Sohar, Oman</p> <h4>Work status</h4> <p>Resident (5 days per week)</p> <h4>Start date</h4> <p>July 2026</p> <h4>Service duration</h4> <p>12 months (renewable)</p> <h4>Qualification</h4> <ul> <li>LNG project experience is a must</li> <li>Process/Chemical engineer with proven experience (more than 10 years) in gas treatment and/or LNG plants detailed design, including licensors</li> <li>Professional experience: several years of proven experience in EPSCC and operation stages of gas treatment projects, including process simulation</li> <li>Strong teamwork and communication skills</li> <li>Knowledge of project development and methods used to submit dossier to state expertise, permitting process, and technical approval</li> <li>Fluent in English</li> </ul> <h4>The service holder is accountable for</h4> <ul> <li>The performance of the LNG plant process in continuity with the detailed engineering results</li> <li>The control of eventual shareholder technical support (cryogenic expert and AGRU licensed expert)</li> <li>Frequent technical alignment between start-up team and field operation when relevant</li> <li>Communication to shareholders for process matters related</li> </ul></p><p></p>

<p>Renardet S.A. &amp; Partners is multidisciplinary company that provides consultancy services for design, construction supervision, technical assistance and project management for infrastructural, architectural and industrial fields of work. The company has executed more than 1500 compound projects in domain of infrastructure, hydrology, structures and dams, as well as low-rise and high-rise buildings (architecture), thanks to our international experts and their expertise.</p><p>The Opportunity:</p><p>Resident Engineer (for Site Supervision Road Project)</p><p>In order to provide a quality and satisfactory service to our clients, we are looking for experts that apart from having excellent knowledge and experience in their field, also possess personal traits such as flexibility in their work environment, team work attribute as well as leadership spirit.</p><p>For a number of projects that will commence in the following months, Renardet S.A. &amp; Partners is looking to hire on a call of contract basis.</p><h2>Job Description:</h2><ul><li>Proven leadership, decision-making, and team management skills are necessary for supervising a multidisciplinary team of engineers, geologists, and inspectors.</li><li>Overseeing all construction activities for dam components, ensuring compliance with designs, specifications, and safety standards.</li><li>Provides technical guidance, resolve site specific problems, and review work plans, method statements, and materials submissions.</li><li>Manage a team of engineers and staff, coordinate with the contractors, and ensure work is completed efficiently.</li><li>Monitors project progress, assess risks, prepare a detailed progress reports, and review contractual issues like claims and variations.</li><li>acts as main point of contact with the Client, contractors, and regulatory bodies.</li><li>ensuring construction activities adhere to the project's budget and timeline.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements:</h2><ul><li>Bachelor s degree in science in Civil Engineering;</li><li>Minimum of 15 years of experience in the construction supervision of roads and bridges.</li><li>Out of these 15 years, at least 8 years shall have been served in the capacity of Resident Engineer.</li><li>Must have at least 5 years experience in the middle east.</li><li>Proficiency in English language (spoken and written).</li></ul><p>Your CV in English language shall be sent exclusively electronically.</p><p>The shortlisted candidates will be contacted for the selection process</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a skilled Senior Network Engineer with expertise in Cisco ACI and UCS to join our team in Muscut. The ideal candidate will have 10-15 years of experience in the automobile sector, with a strong background in network infrastructure design, implementation, and management. Roles and Responsibility Design, implement, and manage network infrastructure using Cisco ACI and UCS technologies. Configure and troubleshoot Cisco Nexus switches, routers, and firewalls to ensure high availability and performance. Develop and maintain documentation for network architecture, topology, and configurations. Collaborate with cross-functional teams to identify and resolve complex network issues. Provide technical guidance and support to junior engineers on network design and implementation best practices. Ensure compliance with industry standards and best practices for network security, scalability, and reliability.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Strong knowledge of Cisco ACI, UCS, Nexus, Data Center, DCNM, VXLAN, EVPN, Spine Leaf, and Fabric technologies. Experience with Cisco Switching, Routing, and Data Center Network design and implementation. Excellent problem-solving skills and ability to analyze complex network issues and develop creative solutions. Strong communication and collaboration skills, with the ability to work effectively with cross-functional teams. Ability to work in a fast-paced environment with multiple priorities and deadlines. Strong understanding of network security principles and protocols, including firewall configuration and management. Gender: Male.</p><p></p></section>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<p>We are seeking a highly motivated and experienced Mechanical Engineer with a strong background in MEP/HVAC sales, estimation, and tendering. The successful candidate will play a key role in preparing competitive bids, managing tender submissions, and supporting business development for major commercial, industrial, healthcare, and residential projects across Oman. Review tender documents, drawings, specifications, BOQs, and contract conditions. Prepare accurate quantity take-offs and detailed cost estimates for MEP works. Coordinate with engineering, design, procurement, and project teams during the tendering process. Obtain and evaluate quotations from suppliers and subcontractors. Prepare commercial and technical proposals, bid documentation, and tender submissions. Analyze project risks and identify value-engineering opportunities to improve project competitiveness. Participate in pre-bid meetings, technical clarifications, and site visits where required. Coordinate with clients, consultants, and internal stakeholders throughout the tendering process. Support order finalization and ensure a smooth handover to the project execution team. Maintain cost databases, supplier information, and market pricing for future tenders. Monitor market trends and contribute to business development initiatives.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors degree in mechanical engineering.</li><li>Proven experience in MEP/HVAC sales, estimation, and tendering.</li><li>Strong knowledge of HVAC, plumbing, fire protection, and electrical systems.</li><li>Experience in preparing competitive tenders for large-scale projects.</li><li>Good understanding of FIDIC contracts and GCC construction practices is preferred.</li><li>Proficiency in Microsoft Office, AutoCAD, and estimation tools.</li><li>Knowledge of Revit/BIM will be an added advantage.</li><li>Excellent communication, negotiation, analytical, and presentation skills.</li><li>Ability to work independently and manage multiple tenders within strict deadlines.</li></ul>

<p>We are looking for an experienced Senior Engineer – HVAC Tendering & Estimation to support the preparation of competitive tenders and cost estimates for commercial, industrial, healthcare, and residential projects. The successful candidate will be responsible for reviewing tender documents, preparing accurate cost estimates, coordinating with MEP disciplines, and ensuring timely submission of technical and commercial proposals.</p><br><ul><li><p>Review tender documents, BOQs, drawings, specifications, and contract conditions.</p></li><li><p>Prepare quantity take-offs and detailed HVAC cost estimates.</p></li><li><p>Prepare technical and commercial proposals for tender submissions.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Coordinate with engineering, procurement, and other MEP disciplines during the tendering process.</p></li><li><p>Analyze project risks and identify value engineering opportunities.</p></li><li><p>Participate in pre-bid meetings, technical clarifications, and site visits.</p></li><li><p>Prepare bid analysis and cost comparison reports for management.</p></li><li><p>Maintain cost databases, supplier pricing, and market information.</p></li><li><p>Support project handover to the execution team after order finalization.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering.</p></li><li><p>10–12 years of experience in HVAC tendering and estimation for MEP projects.</p></li><li><p>Middle East/GCC experience is preferred.</p></li><li><p>Strong knowledge of HVAC systems, quantity surveying, BOQs, and cost estimation.</p></li><li><p>Familiarity with FIDIC contracts and GCC construction practices.</p></li><li><p>Proficiency in Microsoft Excel, MS Office, and AutoCAD. Knowledge of Revit/BIM is an added advantage.</p></li><li><p>Strong analytical, commercial, negotiation, and communication skills.</p></li><li><p>Ability to manage multiple tenders and meet strict submission deadlines.</p></li></ul><p><strong>Preferred Project Experience:</strong></p><ul><li><p>Commercial Buildings</p></li><li><p>Industrial Facilities</p></li><li><p>Hospitals</p></li><li><p>Residential Developments</p></li><li><p>Large-Scale HVAC/MEP Projects</p></li></ul>

<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>