وظائف فني صيانة في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Snr / Technician Analyzers Stream OQ8 Function Maintenance Department Electrical and Instrumentation Section Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Supervisor Analyzers Direct reports</p><p>Job purpose:</p><p>Perform Instrument service repair at the designed location, under Supervisor Analyzers scope, as the focal point of contact; through (1) Executing routine maintenance, and troubleshooting of Instrument Analyzers in designated areas / Plants (including process, utility, power generation, workshop, offices, laboratory) while observing safety rules and contributing in the achievement of KPIs, as per Department Business Plan, (2) Installing and maintaining the operational integrity of Analyzers equipment and systems, and (3) Calibration, installation and repair of Analyzers, and use of calibration and test equipment, in order to minimize downtime, cost-effective and ensure the reliability, availability of equipment.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main Responsibilities:</p><p>Scope of Work - Areas</p><p>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</p><p>Hydro Processing Complex (HCU/ARU/SWS/DHT/HPU/PSA)</p><p>Sulfur/Utilities/WWTP Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</p><p>Offsite/Logistics Complex (Receiving Terminal, Refinery Tankage, Product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</p><p>Instrument / Analyzer</p><p>Collects data from the field and reports them through proper communication channels.</p><p>Receives assignments or work orders from Instrument/Analyzer Supervisors and coordinates activities with other technicians and operators for solving problems with instrumentation equipment.</p><p>Perform routine maintenance, calibration, and testing of analytical instruments to ensure accurate measurements and compliance with safety and environmental regulations.</p><p>Diagnose and resolve issues with analytical equipment, including performing repairs and modifications as necessary using precision tools, PCs and special tools such as Fieldbus and HART Communicators.</p><p>Install, maintain, repair, and calibrate various types of analyzers sensors and detectors for flow, level, pressure, temperature, GC, TOC, pH/ORP, Conductivity, Oxygen, Moisture, and wide variety of environment and process gas analyzers.</p><p>Strong understanding of electrical, mechanical, and computerized systems related to analytical instruments.</p><p>Ability to troubleshoot complex issues and implement effective solutions.</p><p>Maintain detailed records of maintenance activities, calibration results, and repairs performed on equipment.</p><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers</p><p>Notable Working Conditions. Field Operations and office environment. Moderate to intensive computer screen use. Shift</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma in Electronic &amp; Telecommunication or Instrument or Electrical Engineering</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Diploma Technician 2 years of relevant experience</li><li>Sr. Technician 4 years of relevant experience</li><li>Experience as Analyzer or Instrument Technician</li><li>Knowledge of refinery and petrochemical plant operations.</li><li>Experience in static equipment maintenance, Workshop activities.</li><li>Experience in workshop testing and repair techniques</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Customer service skills.</li><li>Refining and petrochemical industry.</li><li>Static Oil &amp; Gas equipment (columns, vessels, furnaces etc.).</li><li>Oil and gas piping basic</li><li>Ability to read relevant technical drawings and specifications;</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking a skilled Multiskilled Technician (AC Base) to perform maintenance, troubleshooting, and repair activities for air conditioning systems and related building services. In this role, you will support preventive and corrective maintenance across HVAC, electrical, and basic mechanical systems to ensure efficient and reliable facility operations. Key Responsibilities Install, maintain, and repair air conditioning and HVAC systems. Perform preventive and corrective maintenance on AC units, FCUs, AHUs, and ventilation systems. Troubleshoot electrical, mechanical, and control-related issues. Conduct routine inspections and identify maintenance requirements. Support basic electrical, plumbing, and mechanical maintenance activities. Ensure compliance with safety standards and maintenance procedures. Maintain service records and maintenance reports. Respond to emergency breakdowns and service requests.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Technical Certification in HVAC, Refrigeration, Mechanical, Electrical, or related field .</li><li>3+ years of experience in HVAC maintenance or facility management services.</li><li>Strong knowledge of air conditioning systems, refrigeration equipment, and ventilation systems.</li><li>Basic knowledge of electrical, plumbing, and mechanical maintenance.</li><li>Ability to troubleshoot and repair HVAC equipment efficiently.</li><li>Good communication and problem-solving skills.</li><li>Valid UAE Driving License is preferred.</li><li>HVAC/Refrigeration certification or trade license.</li><li>Experience in commercial buildings, residential communities, hotels, or facility management companies.</li><li>Familiarity with preventive maintenance systems and work order management.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled and experienced Cold Room Technician to install, maintain, troubleshoot, and repair cold rooms, freezer rooms, refrigeration systems, and related equipment. The ideal candidate should have hands-on experience with commercial and industrial refrigeration systems, ensuring reliable temperature control and efficient operation of cold storage facilities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma / ITI in Refrigeration &amp; Air Conditioning, HVAC, or related field.</li><li>Minimum 3 5 years of experience in cold room and refrigeration system maintenance.</li><li>GCC experience preferred.</li><li>Experience with cold storage facilities, chillers, and freezer systems.</li><li>Ability to troubleshoot electrical and control panel faults.</li><li>Familiarity with preventive maintenance procedures.</li><li>Ability to work independently and under pressure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking a skilled HVAC Technician to install, maintain, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems. In this role, you will ensure the efficient operation of HVAC equipment, perform preventive maintenance, and support safe and reliable facility operations. Key Responsibilities Install, inspect, maintain, and repair HVAC systems and equipment. Diagnose and troubleshoot mechanical, electrical, and control system issues. Perform preventive and corrective maintenance on air conditioning and ventilation systems. Monitor system performance and recommend improvements. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Ensure compliance with safety standards and company procedures. Maintain maintenance records and service reports. Respond to emergency breakdowns and service requests.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Technical Certification in HVAC, Refrigeration, Mechanical, or Electrical Engineering.</li><li>3+ years of experience in HVAC installation and maintenance.</li><li>Strong knowledge of air conditioning systems, chillers, AHUs, FCUs, ventilation systems, and refrigeration equipment.</li><li>Ability to troubleshoot electrical and mechanical faults.</li><li>Familiarity with HVAC controls and preventive maintenance practices.</li><li>Good communication and problem-solving skills.</li><li>HVAC/Refrigeration certification or trade license.</li><li>Experience in commercial, industrial, or facility management environments.</li><li>Valid UAE Driving License is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Responsibilities:</strong></p> <ul> <li><p>Handle AC cleaning and basic air conditioning maintenance work</p></li> <li><p>Carry out plumbing repairs and maintenance activities</p></li> <li><p>Perform electrical maintenance and troubleshooting work</p></li> <li><p>Attend to minor repair and general maintenance tasks</p></li> <li><p>Ensure all maintenance activities are completed safely and efficiently</p></li> <li><p>Support day-to-day facility maintenance requirements</p></li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Technicians shall have experience on kitchen equipment, central laundry equipment, pump sets, compressor stations, lifting gear hydraulics and pneumatics, with knowledge of associated controls.</p> <p>Particular experience of large sewage treatment plants, water treatment and Liquefied Petroleum Gas (LPG) installations would be an advantage.</p> <p>Experience in operation testing and calibration of sterilizing equipment.</p> <p>Must have good knowledge of electricity, electronics and associated equipment and be able to maintain mechanical equipment that may be found present in modern day autoclaves.</p> <p>Must have had experience in working with Gettinge type autoclaves as well as other brands and be aware of the British Standards laid down by Hospital Technical Memorandum 2022.</p> <p>The Technician must have a good knowledge of steam both theory and practice and its use in the sterilization process.</p> <p>His experience should also include hot air and gas sterilizers.</p> <p>Technician must be able to demonstrate the sterilization cycle.</p> <p>All Technicians will have knowledge of the safety requirements and regulations of rotating equipment and pressurized equipment.</p> <p>Shall be able to read, write and speak good English, to read drawings, and use micrometers and Vernier gauges.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Mechanical Technician should have a strong knowledge of the working principle of the above-mentioned fields, and should be familiar enough with all type of tools used in maintenance operations</p> <p>Mechanical Technicians must have a minimum of Five (01) year experience of central boiler steam raising plant, associated steam pipe work and controls, condense recovery systems and boiler water treatment. This will include knowledge of safety and current regulations as applied to such plant.</p> <p>Each must have a certificate of competence from a government-recognized source preferably a Class one Boiler Operators Certificate.</p> <p>Technicians shall have experience of machine shop work including lathe and milling machine work, screw cutting and other close tolerance work with welding ability.</p> <p>In addition to his basic mechanical skills, shall be a capable welder able to fabricate using electric or gas welding together with brazing.</p> <p>Able to do basic welding using electric or gas welding equipment in addition to their basic trade skills.</p> <p>Technicians should have training in medical gases installations including central plant for oxygen, medical air and vacuum pipe work systems and end user terminals with knowledge and application of Hospital technical memorandum (HTM) 2022 &amp; HTM02-01.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job title</strong> Technician, Power Controls &amp; Communication</p><p><strong>Stream</strong> Downstream</p><p><strong>Function</strong> Maintenance</p><p><strong>OQ8</strong></p><p><strong>Location</strong> Duqm</p><p><strong>Budget control</strong> *OPEX and/or CAPEX and/or Revenue amount as relevant*</p><p><strong>Reporting to</strong> Supervisor Electric Power Controls &amp; communication</p><p><strong>Direct reports</strong></p><p><strong>Job purpose</strong></p><p>Perform Electrical Power Controls &amp; communication maintenance at the designed location, under Supervisor Electric Power Controls &amp; communication Services scope, as the focal point of contact; through (1) Executing routine maintenance, and troubleshooting of Electric Power Controls &amp; communication installations in designated areas / Plants (including process, utility, power generation, workshop, offices, laboratory) while observing safety rules and contributing in the achievement of KPIs, as per Department Business Plan, (2) Maintain Electric Power Controls &amp; communication preserving the operational integrity of systems and equipment, and (3) Provide preventive and corrective Electric Power Controls &amp; communication maintenance of electronic equipment, in order to minimize downtime, cost-effective and ensure the reliability, availability of equipment.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justification s, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>SoW - Areas</strong></p><ul><li>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</li><li>Hydro Processing Complex (HCU/ARU/SWS/DHT/HPU/PSA)</li><li>Sulfur/Utilities/WWTP Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</li><li>Offsite/Logistics Complex (Receiving Terminal, Refinery Tankage, Product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</li></ul><p><strong>Electric Main Accountabilities</strong></p><ul><li>Receives assignments or work orders from electrical supervisors and coordinates activities with other technicians and operators for solving problems on electrical motors and lighting systems.</li><li>Install and maintain Electrical installations in Refinery units including process, utility, generation, workshop, offices, Laboratory, etc.</li><li>Provide emergency/unscheduled repairs, troubleshooting and performs scheduled preventive maintenance repairs</li><li>Read and interpret equipment manuals and work orders to perform required maintenance and service.</li><li>Diagnose problems, replace or repair parts, test and make adjustments.</li><li>Use a variety of hand and power tools, electric meters</li><li>Testing and certification of portable electrical tools</li><li>Comply with safety regulations and maintain clean and orderly work areas</li><li>Monitoring of Electrical parameters of Electrical Power systems and installations</li><li>Ensures that over-current and under-voltage protection devices, as well as circuit breakers, fuses, etc., are correctly installed.</li><li>Diagnoses, repairs, and tests wiring or circuit faults using tools such as voltmeter, ammeter etc., and referring to wiring diagrams as necessary.</li><li>Checks electrical motors, generators, switchgear etc. and ensures that all connection points and cables are capable of withstanding designated capacity voltages.</li><li>Dismantles and re-assembles electrical equipment and replaces or repairs parts (such as start switches, controls, elements, wiring).</li><li>Tests equipment s insulation, tests coil windings, checks motors for electrical integrity.</li><li>Performs Preventive Maintenance, Corrective Maintenance, and Annual Maintenance (Turnaround) for, 132Kv and 33KV breakers, Power transformers, VFD,battery chargers, Uninterrupted Power Supply (UPS) units, protection relays, Batteries, IPCS, PMS system etc.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Electrical Supervisors, TL, Planners, Operations STL, HSE</li><li>External: Contractors staff</li></ul><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate screen use. Shift as per business need</p><p><strong>Education requirements</strong> Minimum qualifications for this position is FULL TIME Diploma of Electrical engineering. Certficates from the Private institutes are not acceptable.</p><p><strong>Language requirements</strong> Excellent knowledge of written, read, and spoken English (required)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>Technician 2 years of relevant experience</li><li>Sr.Technician 4 years of relevant experience</li></ul><p><strong>Both:</strong></p><ul><li>Experience as an Electrical technician in Refinery / Petrochemical plant</li><li>Knowledge of refinery and petrochemical plant electrical power distribution system</li><li>Working experience on the Power transformers , VFD, Emergency Diesel generators. Electrical switchgear of 132KV/33KV level, Electrical protection relays, UPS, Battery chargers, Batteries.</li><li>Workshop electric testing and repair techniques.</li><li>Special tools and test equipment for Electric maintenance.</li><li>Knowledge of working on the electrical protection relays</li><li>Wiring diagrams, Single line diagram, Schematic diagram, Interconnection diagram , SMP, SOP</li></ul><p><strong>Skills</strong></p><ul><li>Proficiency in M/S Office.</li><li>Communication skills.</li></ul><p><strong>Competencies:</strong></p><ul><li>Refining and petrochemical industry.</li><li>Ability to read relevant technical drawings and specifications</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li><li>Time management.</li><li>Communication.</li><li>Team player.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum qualifications for this position is FULL TIME Diploma of Electrical engineering. Certficates from the Private institutes are not acceptable.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Technician 2 years of relevant experience</li><li>Sr.Technician 4 years of relevant experience</li><li>Experience as an Electrical technician in Refinery / Petrochemical plant</li><li>Knowledge of refinery and petrochemical plant electrical power distribution system</li><li>Working experience on the Power transformers , VFD, Emergency Diesel generators. Electrical switchgear of 132KV/33KV level, Electrical protection relays, UPS, Battery chargers, Batteries.</li><li>Workshop electric testing and repair techniques.</li><li>Special tools and test equipment for Electric maintenance.</li><li>Knowledge of working on the electrical protection relays</li><li>Wiring diagrams, Single line diagram, Schematic diagram, Interconnection diagram , SMP, SOP</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Refining and petrochemical industry.</li><li>Ability to read relevant technical drawings and specifications</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li><li>Time management.</li><li>Communication.</li><li>Team player.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Service Desk Technician is responsible for providing first-line technical support to end users, resolving IT-related issues, and ensuring efficient operation of IT services across the organization.</p><p><strong>Key Responsibilities</strong></p><ul><li>Provide first-line support for hardware, software, network, and system-related issues.</li><li>Respond to user requests via phone, email, or ticketing system in a timely manner.</li><li>Troubleshoot and resolve basic technical issues or escalate complex problems to higher support levels.</li><li>Install, configure, and maintain computer systems, peripherals, and software applications.</li><li>Support user account management, including password resets and access requests.</li><li>Log, track, and update service tickets in the IT service management system.</li><li>Assist in maintaining IT assets inventory and documentation.</li><li>Support system updates, patches, and routine maintenance activities.</li><li>Ensure compliance with IT policies, procedures, and security standards.</li><li>Provide guidance and basic training to end users when needed.</li></ul><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Information Technology, Computer Science, Information Systems, or a related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of computer hardware, software, and operating systems.</li><li>Understanding of IT troubleshooting and support concepts.</li><li>Familiarity with Windows, Microsoft Office, and basic networking concepts.</li><li>Knowledge of ticketing systems (e.g., ServiceNow or similar) is an advantage.</li><li>Ability to learn technical systems quickly.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong communication and customer service skills.</li><li>Good problem-solving abilities.</li><li>Ability to work under pressure and handle multiple requests.</li><li>Attention to detail and patience when dealing with users.</li><li>Teamwork and collaboration skills.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based and service desk environment.</p><p>May require shift work or on-call support depending on operational needs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Information Technology, Computer Science, Information Systems, or a related field.</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><ul><li>Basic knowledge of computer hardware, software, and operating systems.</li><li>Understanding of IT troubleshooting and support concepts.</li><li>Familiarity with Windows, Microsoft Office, and basic networking concepts.</li><li>Knowledge of ticketing systems (e.g., ServiceNow or similar) is an advantage.</li><li>Ability to learn technical systems quickly.</li></ul><ul><li>Strong communication and customer service skills.</li><li>Good problem-solving abilities.</li><li>Ability to work under pressure and handle multiple requests.</li><li>Attention to detail and patience when dealing with users.</li><li>Teamwork and collaboration skills.</li></ul><p>The applicant must be a job seeker.</p><p>The applicant must be an Omani national.</p><p>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</p><p>The applicant must not have previously benefited from any training program funded by either the public or private sector.</p><p>The applicant must have no more than three (3) years of work experience.</p><p>The applicant must not be more than 38 years of age</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Technician System Control Stream OQ8 Function Maintenance Department Electrical and Instrumentation Section</p><p>Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Supervisor, Control Systems Direct reports</p><p>Job purpose:</p><p>Designs, analyzes, implements and maintain control systems to regulate and optimize various processes in the Process &amp; non Process areas, under Control Systems Supervisor scope, acting as Supervisor player and part of the site s management team using his/her technical expertise to develop solutions regarding quality problems of control system, including all aspects of maintaining control system asset installed based, supporting on new E&amp;I projects, and support for troubleshooting/repair/ and maintaining control system equipment by: (1) manage and ensure the availability of the site s Emergency Shutdown System (ESD), the Distributed Control System (DCS), and PLC-based control loops while proactively promote process safety initiatives, (2) Develop solutions to maintenance and quality problems of control systems in OQ8 plant 3) supporting on new automation projects, and (4) Interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at OQ8 in designated areas, (5) Providing professional technical advice, guidance and support to the team, (6) Identify opportunities of improvement, as well as assess and support improvement proposals from others, and (7) Guide Control system team members in related Control System matters; in order to ensure that the assets and equipment are available at all times, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ8 talent pipeline.</p><p>Main Tasks Responsibilities:</p><ul><li>Ensure compliance with HSE procedures, conduct toolbox meetings and risk assessments, and execute maintenance activities under the Supervisor supervision.</li><li>Receives assignment or work orders to execute all assigned works for E&amp;I maintenance Control Systems.</li><li>Collect data from field and report them through proper communication channels.</li><li>Be familiar with the operation, maintenance, and troubleshooting of various control systems and instrumentation.</li><li>Receives assignment or work orders from supervisor and coordinates with E&amp;I department activities with other peers for troubleshooting and repair works on distributed Control System and Logic controllers.</li><li>Support in troubleshooting and tuning on complex control loops</li><li>Support in programming of various Programmable Logic controllers.</li><li>Execute Control systems maintenance services on planned / un-planned maintenance (CM, PM &amp; TA) activities.</li><li>Execute projects initiated through MOC, RCA and another upgradation means as applicable.</li><li>Support operations to ensure equipment/system performance is within defined Operating Envelope and regularly conduct Alarms management review.</li><li>Provide support in terms of instrument troubleshooting, upset conditions and abnormal situations</li><li>Support Supervisor to upgrade and identify obsolete systems like but not limited to DCS, ESD/IPS, FGS, RTU and PLC systems</li><li>Support Supervisor for receiving and analysing periodic reports on control systems maintenance and scheduled turnarounds and determines the best course of action for increasing efficiency.</li><li>Support supervisor for the spare parts, ensure min/max inventory, and perform Monthly analysis to ensure the spares critical spares part availability.</li><li>Perform Equipment and spare partis critically</li><li>Ensure end-user satisfaction with maintenance corrective actions and close SAP notifications (Work Orders) upon job completion.</li></ul><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment. Moderate to intensive computer screen use. Shift</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma in Electronic &amp; Telecommunication or Instrument or Electrical Engineering</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Technician 2 years of relevant experience</li><li>Sr. Technician 4 years of relevant experience</li><li>Experience as Control Systems or Instrument Technician</li><li>Knowledge of refinery and petrochemical plant operations.</li><li>Experience in static equipment maintenance, Workshop activities.</li><li>Experience in workshop testing and repair techniques</li><li>Knowledge of maintenance best practices.</li><li>Ability to work with computer-based Business Applications (SAP)</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Customer service skills.</li><li>Refining and petrochemical industry.</li><li>Maintaining and troubleshooting of Distributed Control System.</li><li>Maintaining and troubleshooting PLCs.</li><li>Familiar to SAP system transactions &amp; reports.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Water Quality Technician Reports To: Water Quality Supervisor / Laboratory Manager Job Details Number of Vacancies: 14 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Water Quality Technician is responsible for monitoring, sampling, testing, and analyzing water quality to ensure compliance with regulatory requirements, company standards, and operational objectives. The role supports the delivery of safe and high-quality water services through routine inspections, laboratory testing, and field activities. Key Responsibilities Collect water samples from treatment plants, distribution networks, reservoirs, and other designated locations. Conduct routine water quality testing and analysis in accordance with approved procedures and standards. Monitor water quality parameters such as pH, turbidity, chlorine residual, conductivity, and other physical, chemical, and biological indicators. Record, analyze, and report test results accurately and in a timely manner. Perform calibration, maintenance, and basic troubleshooting of laboratory and field testing equipment. Assist in investigating water quality issues and support corrective actions when required. Ensure compliance with health, safety, environmental, and quality regulations. Maintain laboratory records, logs, reports, and documentation. Support inspections, audits, and regulatory reporting activities. Coordinate with operations and maintenance teams to ensure water quality standards are maintained. Follow standard operating procedures and quality control requirements. Qualifications Diploma only in Water Technology, Environmental Science, Chemistry, Chemical Engineering, Laboratory Science, or a related field. Experience Practical Experience: 0 (No prior work experience required) Internship or academic exposure in laboratories or water quality is an advantage. Technical Skills Basic knowledge of water quality testing methods and laboratory procedures. Understanding of water treatment processes and quality standards. Ability to use laboratory instruments and field testing equipment. Basic ability to record and report test results accurately. Awareness of health, safety, and environmental regulations. Basic proficiency in Microsoft Office applications. Soft Skills Strong attention to detail and accuracy. Good communication and teamwork abilities. Willingness to learn and follow procedures strictly. Ability to work in field and laboratory environments. Good organizational and record-keeping skills. Working Conditions Laboratory and field-based work environments. May require outdoor sample collection, site visits, and occasional shift work. Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma only in Water Technology, Environmental Science, Chemistry, Chemical Engineering, Laboratory Science, or a related field.</li><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic exposure in laboratories or water quality is an advantage.</li><li>Basic knowledge of water quality testing methods and laboratory procedures.</li><li>Understanding of water treatment processes and quality standards.</li><li>Ability to use laboratory instruments and field testing equipment.</li><li>Basic ability to record and report test results accurately.</li><li>Awareness of health, safety, and environmental regulations.</li><li>Basic proficiency in Microsoft Office applications.</li><li>Strong attention to detail and accuracy.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and follow procedures strictly.</li><li>Ability to work in field and laboratory environments.</li><li>Good organizational and record-keeping skills.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p><h4>Location</h4> <p>Oman, Muscat</p> <h4>Start date</h4> <p>September 2026</p> <h4>Duration</h4> <p>12 months renewable contract</p> <h4>Key responsibilities</h4> <ul> <li>Conduct technical training needs analysis (TNA)</li> <li>Develop, implement, and maintain technical training programs, including detailed training syllabi and course structures</li> <li>Ensure all training programs meet regulatory and compliance requirements and align with industry best practices</li> <li>Manage and continuously review training programs to ensure adherence to LNG regulations and operational standards</li> <li>Develop and implement training policies and procedures</li> <li>Prepare training manuals and deliver approved technical training courses for engineering and maintenance personnel</li> <li>Plan and manage short and long-term training schedules, resources, and budgets</li> <li>Establish KPIs and monitor training effectiveness and performance metrics</li> <li>Maintain and update training materials to ensure alignment with operational requirements</li> <li>Ensure availability and accessibility of training documentation for all stakeholders</li> <li>Assess trainee performance and maintain training records</li> <li>Liaise with external authorities for training approvals and with external training providers</li> <li>Ensure adequate availability of qualified instructors, assessors, and examiners</li> <li>Develop competency frameworks and oversee competency-based training systems</li> <li>Manage training-related contracts, including scope development and lifecycle administration</li> <li>Promote HSE culture and ensure compliance with HSE regulations and training requirements</li> <li>Support competency development initiatives including coaching, mentoring, and succession planning</li> <li>Develop and implement on-the-job training (OJT) frameworks</li> <li>Ensure compliance with company policies and perform additional duties as required</li> </ul> <h4>Required qualifications</h4> <ul> <li>Bachelor's degree in engineering or relevant discipline (Master's preferred)</li> <li>OPITO certified assessor</li> <li>Training of Trainers (TOT) certification</li> <li>10–12+ years of LNG industry experience, including at least 5 years in technical training</li> <li>Experience in engineering training, assessment, and examination</li> <li>Strong knowledge of technical training standards and regulatory requirements</li> <li>Proven ability to develop and manage competency frameworks and training systems</li> <li>Experience working with cross-functional teams in operational environments</li> <li>Strong leadership, coaching, and mentoring capabilities</li> <li>Excellent communication and analytical skills</li> <li>Fluent in written and spoken English</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining, and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p><br></p> <p> </p> <p> <strong>Position Title-Shift Technician-</strong> Hydraulics / Pneumatics / Lubrication ( SMS / Hot Strip Mill / Compact Strip Production (CSP) </p> <p> <strong>Location:</strong> Sohar, Oman </p> <p> <strong>Educational Qualification:</strong> Industrial trade certification in Mill wright Fitter<br> <strong>Work Experience</strong>- Minimum of 8 + years relevant experience in SRM plant or similar exposure in Media systems</p> <br> <p> <strong>Job purpose:-</strong> </p> <br> <p> To execute all maintenance activities related to Hydraulics, Pneumatics, and Lubrication systems in SMS, Hot Strip Mill (HSM), and Compact Strip Production (CSP) areas with minimum production loss, optimum </p> <p>equipment reliability, and effective utilization of available resources. </p> <br> <p> </p> <p> <strong>PRINCIPAL ACCOUNTABILITIES</strong> </p> <br> <p>Planning &amp; Execution</p> <ul> <li>Execute preventive, predictive, and breakdown maintenance activities in Hydraulics, Pneumatics, and Lubrication systems. </li> <li>Ensure availability and reliability of hydraulic and lubrication systems in SMS, HSM, and CSP areas. </li> <li>Arrangement of tools, tackles, gauges, and fixtures required for maintenance activities. </li> <li>Assist supervisors in updating SOPs, work instructions, HIRA, and maintenance procedures. </li> <li>Minimize equipment downtime and optimize MTTR through effective troubleshooting and maintenance practices. </li> <li>Coordinate with operation and maintenance teams for smooth execution of jobs during shutdowns and running conditions. </li> </ul> <br> <p>4. TECHNICAL SKILLS</p> <p>Hydraulic Systems</p> <ul> <li>Strong knowledge of hydraulic systems including: </li> <ul> <li>Hydraulic pumps </li> <li>Servo &amp; proportional valves </li> <li>Hydraulic cylinders </li> <li>Accumulators </li> <li>Hydraulic motors </li> <li>Hydraulic power packs (HPU) </li> </ul> <li>Experience in Hydraulic Gap Control (HGC), roll bending systems, descaling hydraulics, and servo hydraulic systems used in Hot Strip Mill/CSP. </li> <li>Ability to read and interpret hydraulic schematics and P&amp;ID drawings. </li> <li>Troubleshooting of hydraulic circuits, leakage issues, pressure fluctuations, and valve failures. </li> <li>Experience in maintenance of hydraulic piping, hose assembly, flushing, and contamination control. </li> </ul> <p>Pneumatic Systems</p> <ul> <li>Maintenance of pneumatic cylinders, FRL units, actuators, compressors, solenoid valves, and pneumatic control systems. </li> <li>Troubleshooting of pneumatic circuits and air leakage issues. </li> </ul> <p>Lubrication Systems</p> <ul> <li>Experience in centralized automatic lubrication systems and manual lubrication systems. </li> <li>Knowledge of lubrication grades, grease systems, oil circulation systems, filtration systems, and contamination control. </li> <li>Maintenance of lubrication pumps, coolers, filters, and dosing systems. </li> </ul> <p>SMS / HSM / CSP Equipment Exposure</p> <p>Experience in maintenance of:</p> <ul> <li>Hot Strip Mill </li> <li>Compact Strip Production (CSP) </li> <li>Finishing Mill </li> <li>Roughing Mill </li> <li>Run-Out Table (ROT) </li> <li>Down Coiler </li> <li>Roller Tables </li> <li>Shears </li> <li>Pinch Rolls </li> <li>Steel Melting Shop (SMS) hydraulic systems </li> </ul> <p>Additional Skills</p> <ul> <li>Ability to use diagnostic tools such as pressure gauges, flow meters, temperature sensors, and leak detectors. </li> <li>Basic electrical knowledge related to sensors, solenoids, limit switches, and control valves. </li> <li>Experience in alignment, precision fitting, torque tightening, and mechanical assembly. </li> <li>Exposure to preventive and predictive maintenance practices. </li> </ul> <br> <p>5. ENVIRONMENT, HEALTH &amp; SAFETY</p> <ul> <li>Follow work permit systems and safety procedures as per plant standards. </li> <li>Ensure compliance with safety regulations and proper housekeeping after job completion. </li> <li>Report unsafe conditions, near misses, and equipment abnormalities. </li> <li>Ensure safe handling of hydraulic oils, lubricants, and pressurized systems. </li> </ul> <p> </p> <p>WORK EXPERIENCE</p> <ul> <li>Minimum 8+ years of relevant experience in: </li> <ul> <li>Steel Melting Shop (SMS) </li> <li>Hot Strip Mill (HSM) </li> <li>Compact Strip Production (CSP) </li> <li>Rolling Mill Hydraulics &amp; Lubrication systems </li> </ul> <li>Candidates having exposure in integrated steel plants will be preferred.</li> </ul> <br> <br> <br> <br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Troubleshoot hardware and software issues, providing timely solutions to ensure minimal downtime for users.</li><li>Set up and configure new devices, ensuring they are integrated seamlessly into the existing network.</li><li>Monitor system performance and conduct regular maintenance checks to preemptively address potential issues.</li><li>Assist in the implementation of IT projects, contributing technical expertise to ensure successful execution.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of an Associate's degree in Information Technology or a related field, with a Bachelor's degree preferred.</li><li>Relevant certifications such as CompTIA A+, Network+, or Microsoft Certified: Azure Fundamentals.</li><li>1-3 years of hands-on experience in a technical support role within a corporate environment.</li><li>Familiarity with operating systems including Windows, macOS, and Linux for comprehensive support.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking experienced Cold Room &amp; Refrigeration Technicians to install, maintain, troubleshoot, and repair cold room and refrigeration systems. In this role, you will ensure the efficient operation of refrigeration equipment, maintain temperature-controlled environments, and support preventive and corrective maintenance activities. Key Responsibilities Install, maintain, and repair cold rooms, refrigeration units, and cooling systems. Diagnose and troubleshoot mechanical and electrical faults in refrigeration equipment. Perform preventive maintenance and system inspections. Monitor system performance, refrigerant levels, and temperature controls. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Ensure compliance with safety, environmental, and operational standards. Maintain maintenance records and service reports. Respond to emergency breakdowns and support operational requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div>Diploma or Technical Certification in Refrigeration, HVAC, Mechanical, or Electrical Engineering . 3+ years of experience in cold room and refrigeration system maintenance. Strong knowledge of refrigeration cycles, compressors, condensers, evaporators, and control systems. Experience handling refrigerants and refrigeration troubleshooting. Ability to read technical drawings and electrical schematics. Good problem-solving and communication skills. Preferred Qualifications HVAC/Refrigeration certification or trade license. Experience in cold storage facilities, food processing plants, warehouses, or commercial refrigeration systems. Valid UAE Driving License is an advantage.</div><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform routine maintenance, troubleshooting, and repair on machinery and equipment, including mechanical, electrical, Irrigation softwire, Irrigation networks, submersible pumps, poster pumps VFD panels, Electrical panels . Diagnose equipment, pumps, Electrical equipment malfunctions and recommend repairs or replacement as necessary. Diagnose and troubleshoot problems related to pipes, valves, pumps, controllers, and other system components. Perform preventative maintenance on machinery, pumps, Irrigation networks and equipment to avoid breakdowns and downtime. Maintain accurate records of work performed, including parts and materials used and time spent on each job. Follow all safety procedures and protocols to ensure a safe working environment. Assist with the installation and setup of new machinery and equipment. Provide support to other departments as needed, including responding to emergency maintenance request clean, lubricate and perform other routine maintenance work on machinery as required. Operate all equipment, hand tools, and power tools as required and authorized. Carry out any other activities as and when required by the reporting manager.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Higher Diploma degree in mechanical, Electrical or equivalent.</li><li>Any additional professional technical qualifications will be an added advantage.</li><li>0 - 3 years experience in the field.</li><li>Knowledge of mechanical, electrical, and hydraulic systems.</li><li>Strong problem-solving and troubleshooting skills.</li><li>Ability to read and interpret technical manuals and schematics.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to work independently and as part of a team.</li><li>Detail-oriented with strong organizational skills.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A reputed healthcare facility in Saham, Oman is looking for a dedicated and experienced Female Lab Technician to join its professional team. This is an excellent opportunity for candidates seeking a rewarding career in a modern healthcare environment with competitive compensation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Job Position: Lab Technician (Female)</p> <p>Location: Saham, Oman</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >The role owns six operating verticals: maintenance and assets, projects and construction, health, safety, and compliance, inventory and agricultural input control, quality control, and irrigation operations. This role is expected to own the system, standards, planning, follow-up, and execution discipline across these areas, while remaining practical and hands-on.</span></p><p><strong>Key Responsibilities</strong></p><ul><li>Run preventive maintenance for farm equipment, facilities, utilities, irrigation hardware, and support infrastructure, and carry out repair work personally where appropriate.</li><li>Track service intervals, faults, recurring issues, asset condition, spare-parts needs, and priority repairs, and respond quickly to breakdowns until issues are properly resolved.</li><li>Maintain workshop readiness, tools, records, hygiene, and cleanliness discipline, including practical HACCP-style upkeep where relevant.</li><li>Lead small-to-medium internal construction, repair, renovation, and improvement works and supervise outsourced works from scope through execution.</li><li>Maintain strong day-to-day health and safety discipline across farm operations, workshop activity, maintenance work, irrigation work, and construction tasks.</li><li>Maintain organized control of spare parts, tools, consumables, and agricultural inputs such as seeds, fertilizers, chemicals, irrigation consumables, and packaging.</li><li>Maintain practical quality-control discipline so produce leaving the farm meets expected grading and customer standards.</li><li>Own day-to-day irrigation operation, including schedules, zone operation, valves, filters, leaks, routine checks, troubleshooting, and follow-up.</li><li>Build workable schedules, task lists, records, and follow-up systems, and coordinate labor, materials, tools, vendors, service providers, and contractors so work is organized and efficient.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Mechanical engineering or agricultural engineering is preferred; civil or project exposure is valuable.</li><li>Diploma, degree, or equivalent hands-on technical training is acceptable, and strong practical experience can substitute for formal academic qualifications.</li><li>Candidates should have practical experience in maintenance and troubleshooting of mechanical, utility, facilities, irrigation, or farm-operational assets.</li><li>Candidates should be able to supervise labor, direct hands-on work, and manage both internal works and outsourced contractors.</li><li>Strong planning and organizational ability across scheduling, materials, execution, standards, and follow-through is required.</li><li>Working familiarity with farm equipment, pumps, engines, workshop practices, irrigation systems, or similar mechanical systems is important.</li><li>Good operational discipline around safety, cleanliness, stock control, and day-to-day site standards is required.</li><li>Experience with inventory systems, agricultural inputs, product handling, grading, or dispatch quality control is a strong advantage.</li><li>Ability to read and mark up CAD drawings and maintain organized technical documentation is a strong advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Piping and PLG gas Technician for LPG gas supply company in Oman. Candidates must require experience in Piping , Gas Piping , LPG installation etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must require experience in Piping , Gas Piping , LPG installation etc.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>"Why work for Accor?<br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS"</p><br><br>Job Description<br><br><p>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests</p><br><ul><li>Inspect and perform preventative maintenance on property’s facilities and equipment regularly</li><li>Inspect all areas of the property for safety issues and take immediate corrective action</li><li>Perform touch up and maintenance work in all areas of responsibility</li><li>Adhere to the Standard Operating Procedures Manual and department standards</li><li>Assist guests regarding property facilities in an informative and helpful manner</li></ul><br>Qualifications<br><br><p>Your experience and skills include:<br>Ability to work well under pressure in a fast paced environment<br>Ability to work cohesively and collectively as part of a team<br>Add diplomas/certifications required if needed</p><br><br>Additional Information<br><br><p>Your team and working environment:<br>In 1-2 sentences, introduce the team, property or office environment in a way that reflects the culture<br>Note: Customization may be included for any specific local or legislative requirements, such as work permits<br>Our commitment to Diversity &amp; Inclusion:<br>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Renewable Energy Technician, you will support the production of wind turbine blades and the mechanical and electrical assembly of nacelle and hub systems. This entry-level role provides hands-on experience in composite manufacturing, structural assembly, mechanical integration, electrical installation, process control, and quality-controlled production processes.</p> <p>Trainees will work under the supervision of engineers, trainers, and senior technicians to ensure that all production activities meet strict quality, safety, documentation, and performance standards. The program is designed to develop practical manufacturing competencies required for future employment in wind turbine component production.</p> <p><strong>Key Responsibilities and Training Scope: br&gt;</strong></p> <p><strong>Blade Manufacturing and Composite Production</strong></p> <ul> <li>Participate in theoretical and practical training on wind turbine blade structure, factory rules and discipline, attendance and working time management, cutting room processes, raw materials, molds, supporting equipment, and workplace safety.</li> <li>Assist in mold preparation, material cutting and kitting, fabric layup, overlap control, core material protection, root prefabrication, precast component production, spar cap/main beam preparation, shell production, and related fixture operations.</li> <li>Handle fiberglass, carbon fiber, resins, bonding agents, core materials, auxiliary materials, and consumables in accordance with work instructions, safety requirements, and production procedures.</li> <li>Support resin infusion, vacuum preparation, infusion layout, valve operation, curing profile control, blanket covering, hardness/TG checks, debagging, demolding, and auxiliary material removal.</li> <li>Support web bonding and shell bonding activities, including bonding surface preparation, glue mixing, paste application, gantry and lifting fixture positioning, dry-fit checks, bonding gap adjustment, perimeter vacuum control, mold closing, and inner reinforcement layup.</li> <li>Perform trimming, root surface trimming, and root milling support, sanding, grinding, putty application, surface finishing, touch-up, coating, painting, leading-edge protection, add-ons installation, marking, and delivery/shipping preparation.</li> <li>Support blade weighing, weight-balance calculation, balance correction, production record preparation, certificate of conformity inspection support, and final production documentation.</li> <li>Identify defects, support repair activities, follow NCR and repair processes, and participate in defect improvement and root-cause corrective action activities under supervision.</li> </ul> <p><strong>Nacelle and Hub Assembly</strong></p> <ul> <li>Support the assembly of nacelle structures and hub-related mechanical systems in accordance with engineering documentation, standard operating procedures, and production plans.</li> <li>Assist in the installation and integration of major nacelle components, including gearbox, generator, main shaft, yaw system, cooling systems, hydraulic systems, and related structural and mechanical parts.</li> <li>Install mechanical components, electrical cabling, hydraulic lines, and auxiliary systems while following approved work instructions and safety requirements.</li> <li>Use torque tools, measuring instruments, and precision assembly equipment to meet specified tolerances and assembly requirements.</li> <li>Assist in alignment checks, functional testing, pre-dispatch inspections, and readiness checks before delivery or handover.</li> <li>Maintain production records and follow standardized work procedures, quality checklists, and engineering documentation.</li> </ul> <p><strong>Quality Assurance, Safety, Process, and Maintenance Exposure</strong></p> <ul> <li>Receive basic quality and inspection training, including the use of measuring instruments, quality checklists, production records, and inspection documentation.</li> <li>Support raw material inspection for main and auxiliary materials, visual inspections, dimensional checks, process checks, defect criteria learning, and onsite quality-control activities.</li> <li>Learn quality control points for component production, shell layup, infusion and curing, debagging, web bonding, shell bonding, finishing, paint inspection, UT scan support, and certificate of conformity documentation.</li> <li>Follow PPE requirements, safety education, job safety analysis requirements, workplace hazard identification, daily safety inspection</li> <li>Understand production compliance with SOPs, drawing review, production daily reporting, defect repair follow-up, root-cause corrective action, and continuous improvement activities.</li> <li>Gain exposure to operation and basic maintenance of production equipment such as vacuum pumps, infusion machines, paste/glue machines, gantries, rotation equipment, root milling machines, molds, and related facilities.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Higher Diploma in Mechanical Engineering, Electrical Engineering, or Chemical Engineering or related field.</strong></p> <ul> <li>Recent graduate or up to three (3) years of internship or work experience in manufacturing or industrial environments.</li> <li>Must be under thirty-five (35) years of age.</li> <li>Candidates must not have previously benefited from any government or private initiative.</li> <li>Candidates must be registered as a job seeker or must have resigned from their previous employment for at least three (3) months.</li> <li>Fluency in English, with good documentation, reporting, and communication skills.</li> <li>Willingness and ability to participate in full-time training, possible shift work, and international deployment to China where required.</li> </ul><p></p></section>