وظائف مهندس ميكانيكا معدات ثقيلة

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To safely and efficiently operate forklifts and related material handling equipment in support of scaffolding, utility services, civil maintenance activities and environmental management within the shipyard. The role ensures timely movement of materials, tools, waste, and equipment while maintaining compliance with safety and environmental standards. REPORTING STRUCTURE: Description To operate a 3~32 tons forklift for loading and unloading of all type of materials as required, and also to carry out the regular inspection/lubricating of the equipment and working with plant operators/technicians in order to make sure the different types of products are stocked properly in the facility and equipment s are maintained/operated as per established standards of HSSE/ROP. Operate forklifts (including heavy-capacity and rough terrain units) to transport scaffolding materials, civil construction materials, utility equipment, environmental waste containers, and operational supplies. Load and unload trucks, containers, and storage areas safely and efficiently. Support scaffolding teams by delivering and retrieving scaffolding components and platforms. Assist Utility and Civil Maintenance teams with movement of pipes, cables, concrete materials, and maintenance tools. Transport waste materials and environmental containers in compliance with environmental regulations. Conduct daily pre-operation inspections and complete safety checklists. Report equipment defects and coordinate maintenance requirements. Ensure proper load securing and safe stacking practices. Follow shipyard safety policies, PPE requirements, and environmental protection procedures. Maintain housekeeping standards in assigned work areas. Assist other operational tasks as directed by the supervisor. COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div>QUALIFICATIONS, EXPERIENCE &amp; SKILLS: Minimum Qualifications: High School Diploma or equivalent. Valid Forklift Operator Certification. Minimum Experience: Minimum 1 year of forklift operating experience in shipyard, marine, construction, or heavy industrial environment. Job-Specific Knowledge &amp; Skills: Knowledge of shipyard safety standards and safe material handling practices. Experience handling heavy and oversized loads. Understanding of environmental compliance requirements for waste handling. Ability to work in outdoor and high-risk environments. Good communication and teamwork skills. Basic equipment inspection and maintenance knowledge.</div><p></p></section>

<p>Connect heavy loads to cranes using slings, shackles &amp; chains Guide Crane operators during lifts Calculate load weights Inspect gear for defect Assembly structures</p><p><strong>Desired Candidate Profile</strong></p><p>RIGGER Connect heavy loads to cranes using slings, shackles &amp; chains Guide Crane operators during lifts Calculate load weights Inspect gear for defect Assembly structures</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for maintenance, repair, and basic MEP work to ensure smooth kitchen operations. Key Responsibilities: Maintain and repair kitchen equipment (ovens, fryers, refrigerators, dishwashers, coffee machines) Perform preventive maintenance and troubleshoot breakdowns Handle electrical (DB, wiring, sockets, breakers), plumbing (water lines, drainage, grease traps), and mechanical/HVAC (FCU) tasks Attend breakdown calls, maintain service records, and adhere to safety and hygiene standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma/ITI in Electrical or Mechanical field</li><li>3 5 years of relevant experience</li><li>Strong knowledge of kitchen equipment and MEP systems</li><li>Good troubleshooting skills</li><li>Preferred Experience: Experience as a kitchen equipment technician in a five-star hotel</li><li>Experience in canteen or catering company environments</li></ul><p></p></section>

<p>Shutdown openings for "Lifting Specialist OPAL Approved - Oman Location!!!</p><p>Dear Candidates, Greetings from AMExemplar Services !!!</p><p>We have openings for our prestigious client in Oman; they have openings for Lifting Specialist OPAL Approved Oman Location</p><p>PLEASE NOTE:-</p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY.</p><p>2) OPAL APPROVED LIFTING SPECIALIST IS A MUST.</p><p>3) BELOW FULL JOB DESCRIPTION FOR YOUR REFERENCE.</p><p>4) SHUTDOWN EXPERIENCE IS A MUST</p><p>If interested, please send CV &amp; documents on EMAIL_ADDRESS</p><p>Please provide below details:-</p><p>Current Company:-</p><p>Current Location:-</p><p>Current Salary:-</p><p>Expected Salary:-</p><p>Total years of Exp:-</p><p>No of years Gulf Exp:-</p><p>Are you Opal Approved(Yes/No):-</p><p>No of shutdown done:-</p><p>Notice Period:-</p><p>Passport number:-</p><p>Highest Qualifications:-</p><p>Age:-</p><p>Below is the open positions: -</p><p>1) Lifting Specialist.</p><p>a) Degree / Diploma in Mechanical Engineering.</p><p>b) Valid OPAL certification as a Lifting Appointed Person.</p><p>c) Minimum 10 years of relevant experience as a Lifting Specialist/Lifting Appointed Person in the oil &amp; gas, LNG, or petrochemical industry, with substantial experience in GCC projects and operating facilities.</p><p>d) Proven experience in preparing lifting studies, method statements, and lifting plans for routine and non-routine lifting activities.</p><p>e) Sound knowledge of international lifting standards, lifting equipment, rigging practices, and safety requirements.</p><p>f) Develop and implement lifting plans for Routine Lifts and Non-Routine Simple Lifts in accordance with the approved OLNG lifting plan format and procedures.</p><p>g) Execute, monitor, and directly supervise all lifting and hoisting operations under the assigned scope of work.</p><p>h) Act as a competent person responsible for planning, organizing, executing, and supervising lifting activities at site while ensuring safe work practices.</p><p>i) Provide technical expertise for the execution of heavy and critical lifting operations and prepare lifting plans in compliance with OLNG requirements and applicable international standards, codes, and best practices.</p><p>j) Coordinate and oversee all rigging and lifting activities to ensure compliance with approved method statements, risk assessments, and safety procedures.</p><p>k) Assess lifting requirements for each assigned task and determine the appropriate lifting equipment, rigging arrangements, and execution methodology.</p><p>l) Coordinate with the OLNG Lifting Appointed Person for activities involving Simultaneous Operations (SIMOPS) and obtain necessary approvals.</p><p>m) Review, revise, and obtain approval for lifting plan modifications based on actual site conditions, particularly during shutdown activities, within a short time (typically 1 to 2 hours).</p><p>n) Preferably possess working knowledge and experience of Oman LNG Lifting Procedures, standards, and permit-to-work requirements.</p><p>Please inform your friends &amp; colleagues for the same.</p><p>Warm Regards,</p><p>Vinayak Thakkar - Assistant Manager - Recruitment</p><p>AMExemplar Services</p><p>Branches: - Surat (HO) | Navi Mumbai | Oman | UAE</p><p>Tel: - +91 22 PHONE_NUMBER4</p><p>Mobile: - PHONE_NUMBER</p><p>Email id: - EMAIL_ADDRESS</p><p>Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY.</p><p>2) OPAL APPROVED LIFTING SPECIALIST IS A MUST.</p><p>3) BELOW FULL JOB DESCRIPTION FOR YOUR REFERENCE.</p><p>4) SHUTDOWN EXPERIENCE IS A MUST</p><p>a) Degree / Diploma in Mechanical Engineering.</p><p>b) Valid OPAL certification as a Lifting Appointed Person.</p><p>c) Minimum 10 years of relevant experience as a Lifting Specialist/Lifting Appointed Person in the oil &amp; gas, LNG, or petrochemical industry, with substantial experience in GCC projects and operating facilities.</p><p>d) Proven experience in preparing lifting studies, method statements, and lifting plans for routine and non-routine lifting activities.</p><p>e) Sound knowledge of international lifting standards, lifting equipment, rigging practices, and safety requirements.</p><p>f) Develop and implement lifting plans for Routine Lifts and Non-Routine Simple Lifts in accordance with the approved OLNG lifting plan format and procedures.</p><p>g) Execute, monitor, and directly supervise all lifting and hoisting operations under the assigned scope of work.</p><p>h) Act as a competent person responsible for planning, organizing, executing, and supervising lifting activities at site while ensuring safe work practices.</p><p>i) Provide technical expertise for the execution of heavy and critical lifting operations and prepare lifting plans in compliance with OLNG requirements and applicable international standards, codes, and best practices.</p><p>j) Coordinate and oversee all rigging and lifting activities to ensure compliance with approved method statements, risk assessments, and safety procedures.</p><p>k) Assess lifting requirements for each assigned task and determine the appropriate lifting equipment, rigging arrangements, and execution methodology.</p><p>l) Coordinate with the OLNG Lifting Appointed Person for activities involving Simultaneous Operations (SIMOPS) and obtain necessary approvals.</p><p>m) Review, revise, and obtain approval for lifting plan modifications based on actual site conditions, particularly during shutdown activities, within a short time (typically 1 to 2 hours).</p><p>n) Preferably possess working knowledge and experience of Oman LNG Lifting Procedures, standards, and permit-to-work requirements.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>To lead and deliver complex, high-value aircraft and engineering-related projects across the airline’s fleet lifecycle, ensuring safe, compliant, and cost-effective execution of heavy maintenance events, aircraft transitions, Entry Into Service programs, End-of-Lease returns, ACMI inductions, and fleet modification initiatives. The role exists to ensure aircraft are delivered, maintained, modified, and transitioned in line with regulatory requirements, contractual obligations, and operational readiness standards, while minimizing downtime and optimizing fleet availability.</span><br></p><br><span>​</span><br><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Lead and manage aircraft engineering and fleet-related projects from initiation through completion.</span><br></span></li><li><span><span>Coordinate and oversee the BFE selection and procurement process by working closely with user departments and the Technical Materials Department, ensuring that all equipment meets operational and technical requirements, and that procurement and delivery activities are completed in accordance with project schedules and program objectives.</span><br></span></li><li><span><span>Manage all routine and non-routine checks including regular WP, engine change, fuel nozzle change, modification tasks.</span><br></span></li><li><span><span>Interface directly with relevant departments to effectively manage contractual obligations, including negotiating amendments arising from design modifications or schedule changes, resolving any contractual disputes, and ensuring the successful and formal closure of contracts upon project completion.</span><br></span></li><li><span><span>Review, coordinate, and support the preparation of proposals, statements of work, technical specifications, cost estimates, and contract negotiation activities to assist the Director of Engineering in evaluating options, selecting the most suitable solutions, and determining appropriate actions.</span><br></span></li><li><span><span>Act as the key liaison between internal stakeholders and external parties regarding aircraft specifications, build configuration, and production processes to ensure effective communication, coordination, and timely resolution of project-related matters.</span><br></span></li><li><span><span>Oversee contracted heavy maintenance activities, including C-Checks, structural inspections, cabin refurbishment programs, aircraft painting, and other major maintenance events.</span><br></span></li><li><span><span>Coordinate with contracted MRO organizations to ensure successful planning, execution, and redelivery of aircraft undergoing heavy maintenance.</span><br></span></li><li><span><span>Manage aircraft hangar induction and redelivery processes while ensuring adherence to schedules, budgets, quality requirements, and regulatory standards.</span><br></span></li><li><span><span>Monitor project milestones, maintenance findings, and work scope changes, implementing corrective actions when required.</span><br></span></li><li><span><span>Manage Entry Into-Service (EIS) programs for newly acquired aircraft by overseeing acceptance activities, technical records review, modifications, certifications, crew readiness, spare provisioning, and operational integration.</span><br></span></li><li><span><span>Ensure that all required paperwork and documentation are properly generated, controlled, and cleared in accordance with approved procedures before releasing the aircraft for service.</span><br></span></li><li><span><span>Ensure the accuracy and integrity of technical records, publications, and documentation for the entire fleet. Oversee the maintenance of manuals, bulletins, and logbooks to comply with regulatory and internal requirements.</span><br></span></li><li><span><span>Lead End-of-Lease aircraft return projects, ensuring compliance with lease return conditions and contractual obligations.</span><br></span></li><li><span><span>Coordinate aircraft inspections, records reviews, maintenance actions, and redelivery activities with lessors and technical representatives.</span><br></span></li><li><span><span>Manage induction of short-term wet lease (ACMI) aircraft, including technical acceptance, regulatory approvals, operational integration, and project coordination across all departments.</span><br></span></li><li><span><span>Support aircraft acquisitions, lease transitions, and fleet phase-in/phase-out activities.</span><br></span></li><li><span><span>Plan and manage implementation of aircraft modifications, upgrades, and fleet enhancement initiatives.</span><br></span></li><li><span><span>Coordinate with OEMs, design organizations, engineering teams, suppliers, and regulatory authorities for modification approvals and implementation.</span><br></span></li><li><span><span>Develop comprehensive project plans that clearly define project scope, objectives, timelines, milestones, budgets, resource requirements, and execution strategies, while ensuring effective allocation and utilization of resources throughout the project lifecycle.</span><br></span></li><li><span><span>Proactively identify, assess, and monitor project risks and potential challenges that may impact project performance, and develop appropriate mitigation and contingency strategies to minimize operational disruptions, schedule delays, and financial exposure.</span><br></span></li><li><span><span>Ensure that all project deliverables are completed in accordance with the defined technical specifications, applicable regulatory standards, safety requirements, quality expectations, and commercial obligations, while maintaining compliance with organizational policies and industry best practices.</span><br></span></li><li><span><span>Coordinate and facilitate project meetings, technical reviews, progress discussions, and stakeholder engagement activities to ensure effective communication, timely decision-making, alignment of project objectives, and successful resolution of issues throughout the project execution phase.</span><br></span></li><li><span><span>Represent Salam Air as a technical representative in meetings with aircraft manufacturers, vendors, and industry operators, ensuring effective review of project progress, timely resolution of technical issues, and alignment with agreed project timelines and objectives.</span><br></span></li><li><span><span>Perform any additional tasks as assigned by superiors.</span><br></span></li></ul><br><span>Requirements</span><ul><li><span><span>Graduate in Mechanical/Aeronautical/Electrical Engineering, or alternatively Aircraft Maintenance Engineer license ICAO type II.</span><br></span></li><li><span><span>A minimum of 15 years of experience in the aviation industry, including at least 5 years in leading technical projects.</span><br></span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4359-O - Construction Lead (Mech /HVAC CP4N) <p>Qualifications*</p><br><p>Bachelors Degree in Sciences or Engineering</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years specific involvement in project execution with previous leading roles in mechanical/HVAC scope within an EPC contract<br>execution environment in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting,<br>mechanical testing and completions.<br> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Experience working in large scale operating organisations in Operations, Projects, Subsurface etc.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation,brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas<br>and LNG production facilities.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Graduate Electrical Engineer or I&amp;amp;C with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Electrical, Instrumentation<br><br>&amp;amp; Control, process equipment installations, controls system upgrade, PLC/SCADA,<br><br>Cable installation, MCC, VFD, Switch gear installation and related scope of work.<br><br>Estimation of Saudi Aramco, SABIC projects shall be added advantage.<br><br>Graduate Mechanical Engineer with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Oil &amp;amp; gas pipeline<br><br>installation, process equipment installations, Tanks, structure installation and related<br><br>scope of work. Estimation of Saudi Aramco, SABIC projects shall be added<br><br>advantage<br><br></span><br><span>RequirementsEstimation Engineer (Mechanical)<br><br>Estimation Engineer (Electrical/I&amp;C)<br><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Title:&nbsp;Lifting Supervisor</strong></p><br><p><strong>Location:</strong> Sohar, Oman<br><strong>Reports To:</strong> Lifting Engineer</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Supervise and coordinate all lifting activities on site.</li><li>Ensure lifting plans and risk assessments are in place and followed.</li><li>Inspect lifting equipment and ensure it is certified and in good working condition.</li><li>Verify that crane operators, riggers, and signalmen are competent and certified.</li><li>Conduct toolbox talks and safety briefings related to lifting operations.</li><li>Monitor weather and site conditions to determine safe lifting windows.</li><li>Liaise with site management, HSE, and subcontractors to plan and execute lifts safely.</li><li>Maintain records of lifting operations, incidents, and equipment inspections.</li></ul><p><strong>Qualifications &amp; Experience:</strong></p><br><ul><li>Diploma in Mechanical</li><li>Minimum 5 years of experience in lifting operations in construction, oil &amp; gas, or heavy industry.</li><li>Familiarity with cranes, rigging gear, and lifting accessories.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>JOB PURPOSE:</strong> To carry out electrical maintenance activities of all plants and facility equipment s, all workshop equipments, paiting equipments and portable equipment s in order to ensure the activities of ship repair work are conducted as per timelines, quality, health and safety standards established within ADC and to ensure provision of smooth services to other departments in the Production division.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><p><strong>Day-to-Day Operations</strong></p><p>Carry our general, routine or preventive maintenance and repairs of plant and facility equipment and all other electrical equipment s in the shipyard facilities in order to ensure that all the equipment s are functioning properly and as per quality standards.</p><p>Follow the daily electrical maintenance plan laid out by the Maintenance Supervisor in order to ensure maintenance coverage of all equipment s are completed as per timelines.</p><p><strong>Breakdown Maintenance</strong></p><p>Carry out all electrical equipment s breakdown maintenance in the shipyard facilities as per established timelines depending on the criticality in order to ensure that the equipment is usable and the problem is resolved within minimal amount of time.</p><p><strong>Maintenance Log Reports</strong></p><p>Prepare logbook for routine, preventive, breakdown maintenance of all electrical equipment s in the industrial facilities in order to facilitate ease of access and reusability when required.</p><p>Track and monitor the equipment s requiring electrical maintenance as per their life cycle and utilisation in order to ensure proactive maintenance history and replacement as required.</p><p><strong>Quality Control</strong></p><p>Ensure adherence to quality in the electrical maintenance work in order to ensure that the readiness for quality control inspections and to support all other departments in the Production division.</p><p><strong>Material Requirements and Use</strong></p><p>Coordinate with Maintenance Supervisor if and when required in order to ensure that the material requirements are provided timely and accurately to complete the job requirements.</p><p><strong>Preparing Reports</strong></p><p>Prepare daily reports on progress of repair jobs in order to keep the Maintenance Supervisor aware of the progress and to ensure that the work is completed as per the schedule.</p><p><strong>Policies, Systems, Processes &amp; Procedures</strong></p><p>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</p><p><strong>Quality, Health, Safety, &amp; Environment</strong></p><p>Adhere to all relevant quality, health, safety and environmental procedures, instructions and controls in order to guarantee the safety of employees, quality of products/ services and environmental compliance can be guaranteed.</p><p><strong>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</strong></p><p>Internal: Production Division QA/QC</p><p>External: Other Departments</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications: Polytechnic/ 2 years ITI certificate course in electrical/ Electronic trade or equivalent</li><li>Minimum Experience: 5 years of relevant experience in Plant &amp; Facility equipments , Portable equipment s and machinery, etc maintenance and repair in shipyard or heavy industries or similar work</li><li>Job-Specific Knowledge &amp; Skills: Skills to replace/repair/adjust major electrical parts such as MCC, VFD, Motor starters, humidifiers, blower and all electrical network system etc. Hydraulic Power Packs,1000 Ton hydraulic press,700 Ton Frame bending machine and plate bending machine, Pneumatic cylinder, control valves and solenoid valves Various kinds of CNC machines such as CNC plasma and gas cutting machine, CNC turning center &amp; machine center, CNC drilling and cutting machine Painting equipment s such as hydro blasting machine, sand blasting machine, vacuum recovery</li><li>Understanding of general electrical drawing, and sequence drawing</li><li>Ability to interpret mechanical/electrical and electronic diagram</li><li>Exposure to ISO 9001:2015 standards</li><li>Communication and interpersonal skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Wheel Loader Operator is responsible for safely and efficiently operating the wheel loader within the shipyard premises to support material handling activities. The primary purpose of the role is to load, unload, transfer, and stack various materials, equipment, and waste items required for shipbuilding, ship repair, and yard operations. The operator handles materials such as scrap metal, steel plates, sand, aggregates, debris, containers, and other heavy items, ensuring proper loading onto trucks, trailers, or designated storage areas. The role also includes transporting materials between work sites, stores, and laydown areas as per operational requirements. The Wheel Loader Operator is responsible for conducting daily equipment inspections, maintaining the machine in good working condition, and reporting any mechanical issues promptly. All activities must be carried out in compliance with ADC s safety regulations, traffic management procedures, and environmental standards to ensure safe and smooth yard operations.</p><p>1- KEY ACCOUNTABILITIES:</p><p>Description</p><p>Day-to-Day Operations</p><ul><li>Follow the daily action plan laid out by the Supervisor in order to ensure Excavation, loading and unloading of earth materials and material segregation in stock yard and other works as required by the section.</li><li>Excavator/ Wheel Loader/ Backhoe loader Operation</li><li>Operate an Wheel Loader, Excavator/ Backhoe loader for excavation operation, loading &amp; unloading operation, stock piling in construction works and coordinate with supervisors in order to carry out safe and accurate excavation operations.</li><li>Transport materials between loading, unloading, processing and storage areas in order to ensure the materials are moved carefully to site location and no damage is caused to it.</li><li>Utilise the standard hand signals for equipment operations in order to signal to others the directions, emergencies and path clearance as per established standards of HSSE/ROP.</li></ul><p>Data Recording</p><ul><li>Handled materials or products, and record weight and other production data on tags or labels to ensure the materials off-loaded are tracked for damages, loss, quantity in order to maintain the quality and quantity of products brought to waste management s system.</li></ul><p>Equipment Maintenance</p><ul><li>Perform routine pre and post inspections on Wheel Loader/ Backhoe loader / Excavator in order to ensure they are operating well and as per established quality, health and safety standards.</li><li>Carry out preventive maintenance of Excavator, Wheel Loader/ Backhoe loader such as lubricating the equipment and report to Supervisor to request for maintenance on the criticality in order to ensure that the equipment is usable and the problem is resolved in minimal amount of time.</li><li>Prepare logbook for routine, preventive, breakdown maintenance of Excavator, Wheel Loader/ Backhoe loader in the industrial facilities in order to facilitate ease of access and reusability when required.</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul><p>Quality, Health, Safety, &amp; Environment</p><ul><li>Adhere to all relevant quality, health, safety and environmental procedures including personal protection requirement such as hard hats, gloves, protective footwear and personal fall arrest equipment, etc., instructions, controls and demonstrate the proper application of tag lines and their importance in safe lifting operations in order to guarantee the safety of employees, quality of products/ services and environmental compliances.</li><li>Review and describe the need for emergency response procedures for various situations such as electrical or mechanical failure, operator retrieval procedures (cab cranes), Incidents etc. in order to ensure continuity of operations in cases of emergencies.</li></ul><p>2. COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p><p>Internal: Production Division QA/QC HSSE Division</p><p>External: Ship Owner/Suppliers/ Vendors</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School graduate or equivalent</li><li>License from concerned authority to operate forklift in Oman</li><li>2 years of relevant experience in operating a Excavator, Wheel Loader/ Backhoe loader operation in Construction or shipyard facility or similar work</li><li>Understanding of general daily maintenance of the Excavator, Wheel Loader/ Backhoe loader</li><li>Rules &amp; regulations of ROP/SEZAD/Govt. Authorities in Oman</li><li>Good sense of responsibility</li><li>Adherence to safety requirements</li><li>Communication skills</li></ul><p></p></section>

<p><br></p><p><strong>Scope of Position</strong><br>The Duty Technician is responsible for the daily operation of the engineering department and for ensuring that the department is operated in the safest and most efficient manner. The Duty Technician will assume the responsibilities of the Duty Engineer during his absence.</p><p><strong>Departmental:</strong></p><ul><li>Maintain proper and safe condition of all Plant, Plant Rooms, Equipment and Work areas.</li><li>Comply with all Fire, Life, Health, and Safety Standards.</li><li>To be conversant with the Hotel Emergency Procedures.</li><li>Perform Emergency Response Team duties as required.</li><li>Personal presentation will be clean, neat, and tidy always.</li><li>Be courteous, professional, and service orientated when dealing with Guest, Patrons, and Fellow Staff Members.</li><li>Assist Guests, Patrons, and Fellow Staff Members as and when appropriate.</li><li>Undertake specific duties and projects when assigned.</li><li>Activity support Training Programs.</li><li>To carry out work in accordance with The Hotel Planned Maintenance Program.</li><li>Familiarize himself with the technical details of all Plant and Services relating to the Hotel.</li><li>Work shifts as designated.</li><li>Maintain, repair, check and record equipment relating to:<ul><li>Guest Facilities</li><li>Plant Rooms</li><li>Air Conditioning Equipment</li><li>Refrigeration Equipment</li><li>Fire, Life, Health, and Safety</li><li>Electrical and Mechanical Services</li><li>Plumbing and Heating</li><li>Entertainment Equipment</li><li>Kitchens</li><li>Lighting</li><li>Furniture, Fittings and General Equipment</li></ul></li><li>Actively support and assist the Duty Engineer</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Shift Technician (Buggy &amp; Generator), I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness.</p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and ensure full knowledge and active participation of all our brand initiatives.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong><br>As Shift Technician, I will assume full responsibility for the efficient operation in the following:&nbsp;<br>• Evaluates mechanical, electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer and materials.&nbsp;<br>• Develops mechanical and electromechanical products by studying customer requirements.&nbsp;<br>• Assures system and product quality by designing testing methods; tests finished product and system capabilities; confirms fabrication, assembly, and installation processes.&nbsp;<br>• Controls maintenance tools, stores and equipment and ensure there is continuous cover of the machinery and equipment in case of breakdowns.&nbsp;<br>• Ensure the efficient and economic operation of the Generators and Buggy<br>• Giving solutions to any engineer for any Engineering related issue<br>• Assist the engineering Manager with reporting and technical issues<br>• Ensure that the budget is adhered to and costs are strictly controlled.&nbsp;<br>• Supporting the sustainability department on how we are to be self-sustainable and Cost saving<br>• Coordinate with engineering coordinator related with material order<br>• Control and monitor consumption of materials and asset.<br>• Keeps record of assignments and produce detailed work reports.&nbsp;<br>• Maintains working area and makes sure that all working areas remain clean at all times.&nbsp;<br>• Uses personal safety wares for personal safety while on duty.&nbsp;<br>• Upkeep Six Senses guidelines and standards of service and operation. My performance benchmarks are maintained and exceeded.&nbsp;<br>• Strictly adhere to LQA standards and guest comments.&nbsp;</p><br><p><strong>Qualifications</strong><br>To execute the position of Shift Technician&nbsp;, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><p>• High school diploma or equivalent and/or valid license to practice mechanical engineering and at least 1 year experience in a similar setting.&nbsp;<br>• Technical skills include the ability to analyze and design projects of limited complexity and scope. Knowledge in blueprint reading and installing of machines, wiring and equipment and basic mechanical skills are mandatory.<br>• I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</p><br><p><i>The above is intended to provide an overview of the role and responsibilities for a Shift Technician at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent to the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Key responsibilities</h4> <p>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.<br> Support the development and maintenance of engineering standards, specifications, and procedures.<br> Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.<br> Manage and control site activities to achieve project objectives within approved schedule and budget constraints.<br> Prepare and present project progress reports, forecasts, and status updates to management.<br> Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.<br> Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.<br> Evaluate proposed projects and provide technical recommendations.<br> Prepare technical reports, specifications, and supporting project documentation.<br> Monitor and assess contractor performance and compliance with project requirements.<br> Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.<br> Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</p> <h4>Qualifications</h4> <p>Bachelor's degree in Mechanical Engineering.<br> Master's degree in Engineering, Management, or a Project Management certification is advantageous.<br> Chartered Engineer status is considered an advantage.</p> <h4>Experience & skills</h4> <p>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.<br> Experience in brownfield industrial projects is preferred.<br> Strong knowledge of project management principles and practices.<br> Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).<br> Working knowledge of engineering and drafting software such as AutoCAD.<br> Experience with project planning software such as Microsoft Project and/or Primavera.<br> Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.<br> Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.<br> Proven experience managing contractors and multidisciplinary project teams.<br> Strong written and verbal communication skills, including technical reporting.<br> Demonstrated decision-making, coordination, and stakeholder management capabilities.<br> Knowledge of standard contract terms and conditions.<br> Working knowledge of industrial safety practices and project execution requirements.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br> And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br> And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>Q C Civil Inspectors ( Oil &amp; Gas ) Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p><p>Supervising construction activities related to mechanical, piping, painting, insulation, refractory</p><p>Reinforcement &amp; Formwork Inspection</p><p>Earthworks &amp; Compaction Verification</p><p>Foundations &amp; Underground Utilities Inspection</p><p>Alert Seniors whenever any aspect of the work does not comply with the contract requirements or is being performed outside of the contract scope either by sib contractor or any other party involved</p><p>Quality Documentation &amp; Reporting</p><p>Client &amp; Consultant Inspection Coordination</p><p><strong>Desired Candidate Profile</strong></p><p>Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p>

<p>Dear Candidates, Greetings from AMExemplar Services!!! We have openings for our prestigious client in Oman; they have openings for " MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!! PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC. 2) GCC EXP IS PREFERRED If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of yrs exp as per post applied in Construction Projects:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry Date:- Highest Qualifications:- Date of Birth:- Age:-</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / ITI in Electrical.</li><li>Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4367-O - Construction Superintendent (Mech /HVAC CP4N) <p>Qualifications*</p><br><p>Diploma</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years experience of large offshore decks/topside /living quarters in a Mechanical environment.<br> Experience with multinational teams .<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting, mechanical testing and completions.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport,<br>installation, brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas and LNG production facilities.<br> Experience working in large scale operating organizations in Operations,Projects, Subsurface, etc.</p><br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description</p><p>Heavy Equipment Technician</p><p><strong>Job Title:</strong> Heavy Equipment Technician<br><strong>Department:</strong> Service<br><strong>Reports To:</strong> Service Manager<br><strong>Grade:</strong> K4 / L1<br><strong>Location:</strong> Oman</p><p>Job Summary</p><p>We are seeking a skilled and experienced <strong>Heavy Equipment Technician</strong> to perform preventive maintenance, diagnostics, troubleshooting, and repairs on construction and earthmoving equipment. The ideal candidate will possess strong technical expertise in diesel engines, hydraulics, electrical systems, and powertrains while ensuring all maintenance activities comply with manufacturer specifications, company standards, and health &amp; safety regulations.</p><p>Key Responsibilities</p><ul><li><p>Perform preventive, corrective, and breakdown maintenance on heavy construction and earthmoving equipment.</p></li><li><p>Diagnose and troubleshoot faults related to:</p><ul><li><p>Diesel engines</p></li><li><p>Hydraulic systems</p></li><li><p>Electrical systems</p></li><li><p>Powertrain components</p></li></ul></li><li><p>Carry out repairs efficiently to minimize equipment downtime.</p></li><li><p>Inspect equipment and identify potential mechanical issues before failure.</p></li><li><p>Use diagnostic tools, testing equipment, and service manuals to accurately identify faults.</p></li><li><p>Ensure all repairs are completed according to OEM specifications and company quality standards.</p></li><li><p>Maintain accurate service reports, inspection records, and maintenance documentation.</p></li><li><p>Follow workplace health, safety, and environmental (HSE) regulations at all times.</p></li><li><p>Coordinate with the Workshop Supervisor and Service Manager regarding repair status and spare parts requirements.</p></li><li><p>Provide technical support and maintain professional communication with customers and equipment owners.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Technical Skills</p><ul><li><p>Strong knowledge of:</p><ul><li><p>Diesel engines</p></li><li><p>Hydraulic systems</p></li><li><p>Electrical systems</p></li><li><p>Powertrain components</p></li></ul></li><li><p>Ability to troubleshoot and repair heavy equipment efficiently.</p></li><li><p>Hands-on experience using diagnostic and testing equipment.</p></li><li><p>Ability to read technical manuals, wiring diagrams, and hydraulic schematics.</p></li><li><p>Familiarity with construction and earthmoving equipment operating in Oman is preferred.</p></li></ul><p>Qualifications</p><ul><li><p>Diploma or ITI in:</p><ul><li><p>Mechanical Engineering</p></li><li><p>Diesel Technology</p></li><li><p>Heavy Equipment Technology</p></li><li><p>Equivalent Technical Qualification</p></li></ul></li></ul><p>Experience</p><ul><li><p>Minimum <strong>5 years</strong> of hands-on experience in servicing and repairing heavy construction or earthmoving equipment.</p></li></ul><p>Preferred Equipment Experience</p><p>Experience working on one or more of the following equipment:</p><ul><li><p>Excavators</p></li><li><p>Wheel Loaders</p></li><li><p>Backhoe Loaders</p></li><li><p>Motor Graders</p></li><li><p>Bulldozers</p></li><li><p>Rollers</p></li><li><p>Skid Steer Loaders</p></li><li><p>Telehandlers</p></li><li><p>Cranes (preferred)</p></li><li><p>Other heavy construction equipment</p></li></ul><p></p></section>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> Keeps airplane in safe working condition by servicing engines, engine components, and airframe components. Performs routine troubleshooting, installation, repair, and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Responsible for all maintenance performed on the assigned aircraft.</p> <h4>Job description:</h4> <ul> <li>This includes but is not limited to major maintenance such as landing gear replacement, flight control replacement, and accomplishing periodical inspections.</li> <li>Maintains tactical aircraft, support equipment, and forms and records. Performs and supervises flight chief, expediter, crew chief, repair and reclamation, quality assurance, and maintenance support functions.</li> <li>Services aircraft. Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels.</li> <li>Provides for the launch, recovery, and preflight, thru-flight, and BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment.</li> <li>Uses technical data to diagnose and solve maintenance problems on aircraft systems.</li> <li>Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.</li> <li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li> <li>Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems.</li> <li>Supervises and performs aircraft jacking, lifting, and towing operations.</li> <li>Inspects aircraft structures, systems, components, and related systems.</li> <li>Supervises and performs aircraft and component inspections.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Inspects and checks components for clearances, tolerances, proper installation, and operation.</li> <li>Inspects and operates powered and nonpowered aerospace ground equipment.</li> <li>Inspects and identifies aircraft corrosion for prevention and repair.</li> <li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Inventories and maintains aircraft equipment.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum of 3-5 years' experience on like aircraft.</li> <li>High school graduate or GED with a certificate of completion.</li> <li>Experience in all aspects of intermediate level maintenance on F-16 Block 50 aircraft.</li> <li>Experience in phase inspections and all aspects of scheduled maintenance.</li> <li>Experience in inspection and troubleshooting of any systems failures.</li> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Experience with landing gear overhaul, inspection, and operational checks.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<p>URGENT HIRING FOR QA QC ENGINEER (Mechanical)</p><p>Industry: Oil &amp; Gas / Refinery / Pipeline</p><p>Location: GCC / Middle East</p><p>Position: QC Engineer Mechanical</p><p>Experience: Minimum 15 Years</p><p>We are looking for an experienced QC Engineer Mechanical with extensive experience in pipeline, piping, tanks, pressure equipment, valves, rotating equipment, and refinery construction projects .</p><p>Qualification &amp; Certifications</p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li></ul><p>Experience Required</p><ul><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li></ul><p>Key Responsibilities</p><ul><li>Implement QA/QC activities , including inspection and surveillance of subcontractors and suppliers, in accordance with approved ITPs, procedures, method statements, and quality control documents.</li><li>Prepare, review, and sign off applicable inspection, testing, and quality surveillance records .</li><li>Conduct surveillance inspections to ensure compliance with approved processes and procedures.</li><li>Monitor construction activities and ensure required quality standards are maintained.</li><li>Raise RFIs (Request for Inspection) to the client for day-to-day construction activities.</li><li>Witness pigging, hydrostatic testing, pneumatic testing , and other applicable inspection and testing activities.</li><li>Conduct line walks and prepare, monitor, and close punch lists.</li><li>Witness and verify PQR/WQT activities in accordance with approved PWPS/WPS .</li><li>Verify that all materials are procured from approved suppliers and comply with project specifications.</li><li>Monitor and ensure timely closure of NCRs , including suitable correction and corrective actions.</li><li>Maintain records related to calibration, inspection, and testing equipment .</li><li>Ensure the latest approved versions of applicable drawings, specifications, procedures, and quality documents are available at site.</li><li>Witness qualification procedures and tests and certify the results as applicable.</li><li>Issue Inspection Release Notes (IRN) and sign test packs / QC dossiers as required.</li><li>Coordinate with clients, third-party inspectors, subcontractors, and construction teams on quality-related matters.</li><li>Provide regular feedback to the Site Quality Engineer / Quality Manager regarding day-to-day quality issues and concerns.</li></ul><p>Required Skills</p><ul><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul>