وظائف مهندس ديكور في سلطنة عمان

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Purpose</strong> The role holder will drive process automation, deploy insurance technology solutions, and ensure a smooth digital journey across operations.</p><p><strong>Key Responsibilities</strong></p><p><strong>Insurance Operations Management</strong> Oversee day-to-day insurance operations including policy issuance, underwriting support, claims coordination, and endorsements, ensuring service quality and turnaround time (TAT) standards are met. Establish and monitor operational KPIs, KRIs, and performance dashboards to track efficiency and quality. Re-engineer underwriting and claims workflows to improve productivity, reduce leakage, and enhance customer experience. Ensure regulatory compliance and internal governance standards are maintained across all operational processes.</p><p><strong>Digital Transformation &amp; Technology Implementation</strong> Lead the evaluation, selection, and implementation of insurance technology platforms and digital tools (e.g., policy administration systems, underwriting/claims automation platforms, AI-driven processing tools). Drive automation initiatives (RPA, AI/Gen AI, workflow automation) to improve underwriting and claims processing efficiency and reduce quote-to-bind/claims cycle times. Manage end-to-end digital project delivery requirements gathering, vendor coordination, testing, rollout, and post-implementation support ensuring minimal disruption to business operations. Partner with IT and external technology vendors/consultants to ensure digital solutions align with business needs and regulatory expectations. Modernize underwriting and claims workbenches by integrating relevant data sources and digital tools to improve decision accuracy and operational resilience. Monitor emerging insurtech trends and recommend relevant digital solutions to maintain competitive advantage.</p><p><strong>Change Management &amp; Stakeholder Engagement</strong> Act as a change champion, ensuring smooth adoption of new systems and processes across underwriting, claims, and operations teams. Provide training and support to operational staff during digital transitions to minimize disruption and resistance. Engage with senior management on digital strategy, modernization roadmaps, and operational excellence initiatives. Coordinate cross-functional teams (Underwriting, Claims, IT, Compliance) to ensure aligned execution of digital and operational initiatives.</p><p><strong>Governance, Risk &amp; Compliance</strong> Strengthen governance, risk, and compliance frameworks across operational processes. Ensure digital initiatives maintain data security, regulatory compliance, and audit readiness. Establish real-time risk monitoring and reporting mechanisms for operational and digital risk.</p><p><strong>Omanization &amp; Talent Development</strong> Identify, coach, and mentor Omani employees within the operations team to build a sustainable local talent pipeline. Design and implement a structured on-the-job training plan covering insurance operations, digital tools, and process improvement techniques. Support succession planning by preparing capable Omani nationals for future operations/digital leadership roles.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><strong>Key Requirements</strong></p><p><strong>Education &amp; Qualifications</strong> Bachelor's degree required; MBA or equivalent preferred. Professional insurance qualification preferred (CIP, ACII, FIII, or equivalent).</p><p><strong>Experience</strong> Minimum 15+ years of experience in insurance operations, with demonstrated involvement in digital transformation and technology implementation projects. Proven track record managing underwriting/claims operations across multiple lines (P&amp;C, Life &amp; Annuities, Health). Experience deploying or evaluating insurance technology platforms and automation solutions (RPA, AI/Gen AI, core insurance systems). Experience leading cross functional teams and managing multi vendor technology ecosystems. Prior experience in governance and regulatory compliance within insurance operations.</p><p><strong>Skills</strong> Strong operational management and process re-engineering capability. Working knowledge of insurance technology platforms and digital transformation methodologies. Project management skills able to lead technology implementation from planning through rollout. Change management and stakeholder engagement skills, particularly around technology adoption. Strong analytical skills KPI/KRI tracking, performance reporting, and data-driven decision-making. Coaching and people-development skills, with commitment to national talent development.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Project Engineer who will be responsible for managing quantity surveying for major and extension projects shall undertake the following actions based on the project contract documents, approved documents on material submittals &amp; method statements:</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Monitor all the cost and contractual aspect and report to the Client</p><p>Provide the required technical support, assistance and advice on all aspects of quantity surveying activities covering measurement, certification and payments</p><p>Collect and check quantity measurements from the project site and Prepare the Quantity Survey Reports</p><p>Prepare of monthly Contractor s Interim Payment Certificate and preparation of Final Account</p><p>Assist in the interpretation of the meaning or intent of the Contract Documents, and analysis of any claims which may be submitted by the contractor.</p><p>Review claims submitted by the contractor</p><p>Ensure that full documentation and records are maintained in the Client s office facility to properly substantiate all Interim and Final Payments to the contractor to a standard acceptable to the Client.</p><p>Ensure materials utilised at project site confirming to approved make and prepare report in case on non-conformance</p><p>Co-ordination with project managers</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<p>Q C Civil Inspectors ( Oil &amp; Gas ) Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p><p>Supervising construction activities related to mechanical, piping, painting, insulation, refractory</p><p>Reinforcement &amp; Formwork Inspection</p><p>Earthworks &amp; Compaction Verification</p><p>Foundations &amp; Underground Utilities Inspection</p><p>Alert Seniors whenever any aspect of the work does not comply with the contract requirements or is being performed outside of the contract scope either by sib contractor or any other party involved</p><p>Quality Documentation &amp; Reporting</p><p>Client &amp; Consultant Inspection Coordination</p><p><strong>Desired Candidate Profile</strong></p><p>Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring a Head of Product Technology to own the technology platform end-to-end: the application and the infrastructure on which it runs. This is not background plumbing. The application is the product. The infrastructure is the foundation on which settlement finality, system resilience, latency performance, and operational availability are delivered. The post-holder must understand both layers as one integrated whole and own them as one.</p> <p>In build, the post-holder is the architect of the platform from a blank sheet: technology reference architecture, infrastructure topology, hosting strategy, network and database design, integration patterns, security architecture, and resilience and disaster-recovery architecture. In run, the same person operates the platform and the team they have designed. This is not a sit-in-your-office role.</p> <h4>What the role covers</h4> <ul> <li>Designing the technology reference architecture from a blank sheet: application architecture, infrastructure topology, database platform, network design, integration patterns, security architecture, and resilience and DR architecture</li> <li>Owning the application end-to-end: design, configuration, integration, data model, change management, and support</li> <li>Owning the infrastructure that hosts the platform: compute, storage, network, virtualisation, database, and middleware, whether on-premise, hosted, or cloud</li> <li>Owning platform resilience: high availability design, backup and recovery architecture, disaster recovery, business continuity, and tested failover</li> <li>Owning end-to-end platform performance including transaction latency, capacity planning, and headroom strategy</li> <li>Owning first-line platform security: secure configuration, hardening, identity and access management, vulnerability management, patching, and security incident response</li> <li>Owning the technical relationship with the build vendor; holding them to account on functional, technical, and operational delivery</li> <li>Designing the human operating model for the platform: team shape, shift patterns, on-call rotations, incident command structure, runbooks, and third-party support arrangements</li> <li>Owning all integrations between the platform and external systems: custodians, settlement banks, exchange, SWIFT, Bloomberg, and ISIN infrastructure</li> <li>Line managing the Application Managers, Database Administrator, and the wider platform engineering team as it builds</li> </ul> <h4>Requirements</h4> <h4>Who we are looking for</h4> <p>At least 12 years in financial-services platform technology, with substantial time spent owning a mission-critical platform end-to-end across both application and infrastructure layers. Direct, demonstrable experience architecting a mission-critical regulated financial platform from a blank sheet: this is non-negotiable. Direct, demonstrable experience as the technical authority on a CSD, custody platform, post-trade platform, capital markets platform, or core banking system of comparable mission-criticality: also non-negotiable.</p> <p>Hands-on technical credibility across both application and infrastructure layers: able to read code, query a database, design a network topology, debug an integration, and challenge a vendor's technical decisions with authority. Demonstrated experience holding a major build vendor or system integrator to account on technical delivery. Deep understanding of how a regulated financial-services business works, not just the technology underneath it. Fluent in English.</p> <p>Experience in financial market infrastructure (CSD, CCP, exchange, or payment system) is an advantage. So is familiarity with CPMI-IOSCO principles and experience designing SWIFT, Bloomberg, and ICSD integrations.</p> <h4>What this is</h4> <p>The platform does not exist yet. The architecture has not been designed, the infrastructure has not been built, and the operating model has not been written. The person who takes this role will have done all of it. If you have genuinely architected and owned a mission-critical regulated financial platform from a blank sheet, and you have the hands-on credibility and delivery drive to do it again, this is worth a conversation.</p></p><p></p>

<p>Job title: Head of Exploration Stream: Commercial Function Exploration - Exploration New Operated Assets Location: Oman - HO Budget control: *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to : VP Exploration Direct reports: Principal Exploration Data Management Principal Geophysicist Principal Geoscientist Principal Reservoir Engineer Lead Geologist Senior Petrophysicist</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>Description</h4> <p><strong>The opportunity</strong><br> A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>This is one of the two most important hires the organisation will make, alongside the Project Manager. We are hiring a Product Owner to own the product in its entirety: the platform itself, the commercial proposition wrapped around it, the offerings made to each participant type, the fee schedule, the rulebook, the participant documentation, and the operating model that governs how participants interact with the platform. The role sets the what; the Project Manager delivers the when.</p> <p>The post-holder must be a deep domain expert in central securities depository, custody, and post-trade infrastructure: fluent in settlement, registry, asset servicing, corporate actions, repo, and the operational realities of how a CSD works. They will engage with the regulator, anchor issuers, custodians, primary dealers, and the build vendor and must be unquestionably authoritative on what the platform is, how it works, and why it has been designed the way it has.</p> <h4>What the role covers</h4> <ul> <li>Owning the product vision and roadmap end-to-end; defining the commercial proposition for each participant category</li> <li>Owning the fee schedule: design, benchmarking against international comparators, and ongoing maintenance</li> <li>Translating the product vision into functional requirements the build vendor delivers against; owning the functional specification across settlement, registry, asset servicing, corporate actions, repo, primary issuance, and participant interfaces</li> <li>Approving vendor functional design documents on behalf of the Company</li> <li>Owning the rulebook: structure, content, drafting, version control, and approval cycle</li> <li>Owning participant-facing documentation: admission criteria, membership agreements, participant operating manuals, fee schedules, and service level agreements</li> <li>Owning the operating model design: how participants interact day-to-day, cut-off times, settlement windows, corporate actions calendars, and exception handling</li> <li>Acting as the Company's authoritative voice on the platform design in regulatory engagements, with issuers, custodians, and international counterparties</li> <li>Line managing the functional Business Analysts and working in tight partnership with the Project Manager</li> </ul> <h4>Requirements</h4> <p><strong>Who we are looking for</strong><br> At least 15 years in central securities depository, custody, post-trade, or capital markets infrastructure, with substantial time in a product, design, or operating-model role rather than a purely operational one. Direct, demonstrable experience as the functional and product authority on a CSD, custody platform, post-trade platform, or financial market infrastructure of comparable scale and complexity: this is non-negotiable. The post-holder must have personally led, not merely participated in, the functional design of a build of similar weight.</p> <p>Deep, current expertise across settlement, custody, registry, corporate actions, asset servicing, repo, primary issuance, and post-trade transparency. Demonstrated experience drafting CSD rulebooks, participant documentation, fee schedules, and operating manuals. Track record of acting as the functional counterpart to a major build vendor and signing off vendor functional design. Fluent in English.</p> <p>Experience with Islamic-finance-compatible CSD design, familiarity with CPMI-IOSCO principles, and Arabic language skills are all advantages.</p> <h4>What this is</h4> <p>The product does not exist yet. The rulebook has not been written, the fee schedule has not been set, and the functional specification has not been drafted. The person who takes this role will have done all of it. If you are unquestionably expert in CSD and post-trade design, have personally led a build of comparable weight, and want to own a product from a blank sheet, this is worth a conversation.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform Functional Evaluation &amp; Detailed Analysis Participate in design discussions/sessions/workshops to address the process gaps, provide suggestions to improve existing systems and to change/modify current business processes to achieve quantifiable process improvements. Able to map business requirements to Oracle ERP modules and come up with the best fit and scalable solution. Responsible for functional solution design, application setups and testing. Prepare design documentation and work with application team to support business requirements. Experience in Oracle application including extensions, customizations and development of new CEMLI components. Take part in testing to ensure that the new system/solution works as expected. Utilizes industry leading best practices for solution design/development. the ability to interact with the customer as well as with other IT teams. Good communication skills. Coordinate with offshore team</p></div></section>

<p><h4>Description</h4> <p><strong>The opportunity</strong><br> A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>This is one of the two most important hires the organisation will make, alongside the Project Manager. We are hiring a Product Owner to own the product in its entirety: the platform itself, the commercial proposition wrapped around it, the offerings made to each participant type, the fee schedule, the rulebook, the participant documentation, and the operating model that governs how participants interact with the platform. The role sets the what; the Project Manager delivers the when.</p> <p>The post-holder must be a deep domain expert in central securities depository, custody, and post-trade infrastructure: fluent in settlement, registry, asset servicing, corporate actions, repo, and the operational realities of how a CSD works. They will engage with the regulator, anchor issuers, custodians, primary dealers, and the build vendor and must be unquestionably authoritative on what the platform is, how it works, and why it has been designed the way it has.</p> <h4>What the role covers</h4> <ul> <li>Owning the product vision and roadmap end-to-end; defining the commercial proposition for each participant category</li> <li>Owning the fee schedule: design, benchmarking against international comparators, and ongoing maintenance</li> <li>Translating the product vision into functional requirements the build vendor delivers against; owning the functional specification across settlement, registry, asset servicing, corporate actions, repo, primary issuance, and participant interfaces</li> <li>Approving vendor functional design documents on behalf of the Company</li> <li>Owning the rulebook: structure, content, drafting, version control, and approval cycle</li> <li>Owning participant-facing documentation: admission criteria, membership agreements, participant operating manuals, fee schedules, and service level agreements</li> <li>Owning the operating model design: how participants interact day-to-day, cut-off times, settlement windows, corporate actions calendars, and exception handling</li> <li>Acting as the Company's authoritative voice on the platform design in regulatory engagements, with issuers, custodians, and international counterparties</li> <li>Line managing the functional Business Analysts and working in tight partnership with the Project Manager</li> </ul> <h4>Requirements</h4> <p><strong>Who we are looking for</strong><br> At least 15 years in central securities depository, custody, post-trade, or capital markets infrastructure, with substantial time in a product, design, or operating-model role rather than a purely operational one. Direct, demonstrable experience as the functional and product authority on a CSD, custody platform, post-trade platform, or financial market infrastructure of comparable scale and complexity: this is non-negotiable. The post-holder must have personally led, not merely participated in, the functional design of a build of similar weight.</p> <p>Deep, current expertise across settlement, custody, registry, corporate actions, asset servicing, repo, primary issuance, and post-trade transparency. Demonstrated experience drafting CSD rulebooks, participant documentation, fee schedules, and operating manuals. Track record of acting as the functional counterpart to a major build vendor and signing off vendor functional design. Fluent in English.</p> <p>Experience with Islamic-finance-compatible CSD design, familiarity with CPMI-IOSCO principles, and Arabic language skills are all advantages.</p> <h4>What this is</h4> <p>The product does not exist yet. The rulebook has not been written, the fee schedule has not been set, and the functional specification has not been drafted. The person who takes this role will have done all of it. If you are unquestionably expert in CSD and post-trade design, have personally led a build of comparable weight, and want to own a product from a blank sheet, this is worth a conversation.</p></p><p></p>

<p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 11,000 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world. For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><p>The Testing &amp; Commissioning Engineer will be responsible for planning, managing, coordinating, and performing all activities related to the testing and commissioning of systems and equipment for large-scale PMC (Project Management Consultancy) infrastructure projects, particularly in the railway sector. The candidate will ensure that all systems function safely and according to project requirements prior to handover.</p><p><strong>Missions/Main Duties</strong></p><ul><li>Develop, review, and update testing and commissioning plans, procedures, and schedules to match project timelines.</li><li>Collaborate with design, construction, and systems teams to identify commissioning requirements and interfaces.</li><li>Lead and execute on-site testing and commissioning for various systems (electrical, mechanical, signaling, telecom, etc.).</li><li>Ensure all installations and systems meet contract specifications, safety standards, and regulatory codes.</li><li>Lead technical workshops, readiness reviews, and T&amp;C governance meetings to ensure alignment across all stakeholders.</li><li>Manage the Design and Build contractor s Factory Acceptance Testing, System Integration Testing, and Site Acceptance Testing for complex railway systems, ensuring full technical compliance, seamless system integration, and a smooth handover to operations.</li><li>Supervise and validate the testing and commissioning performed by vendors and contractors.</li><li>Coordinate with all project stakeholders to resolve issues and ensure smooth project handover.</li><li>Conduct meetings to track progress, address challenges, and review commissioning documentation.</li><li>Review and approve inspection test plans, method statements, and testing procedures.</li><li>Oversee final system integration, performance testing, and acceptance activities.</li><li>Prepare and submit final commissioning documents and as-built records.</li><li>Support training and transition for the client s operations team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or a related field.</li><li>Minimum 10 years of relevant experience in Testing &amp; Commissioning roles, preferably within railway or large infrastructure PMC projects.</li><li>Proven experience leading testing and commissioning for multi-disciplinary systems.</li><li>Sound knowledge of applicable international standards and safety regulations</li><li>Strong understanding of project management methodologies and PMC practices.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title TL Instrument SR2 Grade Stream OQ RPI Function Assets Management SR2 Instrument Location Oman Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head of Assets Management SR2 Direct reports 10: <br> Sr/ Engineer (1) <br> Supervisor (1) <br> Sr /Specialist (2) <br> Sr Technician/ Technician (6) Job purpose <br> Leads, and coordinates, the Instrument Maintenance Works, and the designated team for SR2 and all related operations under Head of Assets Management SR2 scope, acting as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works (4) Lead the designated staff (team) and external contractors in performing electrical maintenance services on planned / un-planned maintenance (CM, PM &amp; TA) activities ; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets. <br> <br> The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by IT Technology platform, HSE standards, Omani government &amp; other legal justifications, and best international practices in consonance with national objectives Main tasks and responsibilities <br><br> SR <br> Plant Area Acronym Details Area1 CDUs, VDU &amp; DCU Crude / Vacuum Distillation <br> Area2 RFCC Residue Fluidized Catalytic Cracking <br> Area 3,4,5 <br> HCU, <br> Hydrotreaters <br> HGU <br> <br> Hydrocracker Unit <br> Hydrotreaters : Hydro-desulfurization (HDS) to remove sulfur and nitrogen compounds from natural gas and other refined petroleum products like diesel, gasoline, and jet fuel. <br> Hydrogen Generation Unit : Pre-desulfurization section, followed by desulfurization, reforming and process gas cooling with high temperature shift conversion to increase the hydrogen content of the process gas. <br> Area 6 Offsite Operations Tank Farm, Waste-water Treatment, Sulfur Granulation, Non-Plant areas Utilities Utilities Steam, fuel, various waters, air, electric power, and sewers, <br> <br>Instrument <br> Equipment Lead the teams for the execution of Maintenance works related with the following equipment / aspects: <br> Pressure transmitters These instruments measure the pressure of fluids or gases in pipes, tanks, and vessels. They are used to ensure that the process is operating within safe pressure limits. Temperature transmitters gauges, Thermowells, <br> Thermocouple Assemblies. These instruments measure the temperature of fluids or gases in various process equipment, such as heat exchangers, reactors, and distillation columns. <br> They help to ensure that the process is operating within the desired temperature range. Flow meters These instruments measure the flow rate of liquids and gases in pipes and vessels. They are used to monitor the amount of material being transferred between different process stages. Level transmitters These instruments measure the level of liquids and solids in tanks and vessels. They are used to ensure that tanks are not overfilled or emptied too quickly, which could result in safety hazards or process disruptions. Analyzers These instruments measure the chemical composition of process streams. They are used to monitor the quality of products and ensure that the process is operating within the required specifications Control valves / Instrument Manifold / Positioners. These are critical components that control the flow of fluids in process equipment. They are used to adjust the flow rate, pressure, and temperature of the process stream to maintain optimal process conditions. Safety relief valves These are critical components that protect equipment and personnel from overpressure conditions. They are designed to open automatically when the pressure exceeds a predetermined level, releasing excess pressure and preventing equipment damage or personnel injury. <br> <br> Accountabilities: <br> Team management: <br> Leading a team of Instrument maintenance engineers, supervisors, and technicians by assigning Instrument maintenance tasks, monitor the progress, providing feedback, training, and manage the team performance. <br> Develop and provide effective Training Program for the development of young engineers. <br> Evaluate job performance for the assigned maintenance team and assist Head of Maintenance in setting key performance indicators for the department. <br> Provide guidance &amp; support to maintenance team on identifying critical issues, repetitive failure of rotating equipment (RCA) &amp; work backlogs. <br> Lead the development and ensures execution of Training Program for the development of young engineers. <br> Maintains technical expertise in functional areas of process Instrument. <br> Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement <br> Develops IDP of Omanis within the section, prepares training programs and monitors their implementation <br> Participate in Management of Change (MOC) committee review meetings. <br> Monitors staff attendance, attitude and implements discipline within the section. <br> Prepare annual leave plans. <br> Equipment maintenance <br> Implements the Preventive Maintenance (PM) plan within his section. <br> Accountable for all work for instruments maintenance and calibration to the SR2 facility / buildings. <br> Accountable for continuous availability of Instrument equipment such as switchgear, transformers, motors, drivers, UPS/BC, generation system, communication system. <br> Ensure application of best work practices in execution of Instrument maintenance jobs. <br> Responsible for issuing Work Permits on Instrument side and implementing Lock Out Tag Out (LOTO) procedure. <br> In emergency drills or emergencies maintains close liaison with On-Scene Commander and Operation Coordinator, for ensuring quick restoration of power. <br><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position are a bachelor in Instrument/Electronics Engineering or equivalent</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>TL 8-10 years of relevant experience 10-12 years of relevant experience</p><p>Relevant experience in instrument Maintenance Services inclusive of 4 years of relevant experience as Maintenance Team Leader role (Oil &amp; Gas / Petrochemical or Refinery Plant experience preferred).</p><p>Experience in bids evaluation and knowledge of contracts management &amp; spare parts optimization.</p><p>Experience and knowledge in project planning, cost control, contract development, installation, trouble shooting, and start-up.</p><p>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</p><p>Good experience in handling of Maintenance Contracts and shutdown related jobs.</p><p><strong>Knowledge of:</strong></p><p>Computerized Maintenance Management Systems (CMMS)</p><p>Expertise in SAP- PM</p><p>Process Equipment Life-Cycle Management</p><p>Experience in condition monitoring systems on rotating equipment.</p><p>Good knowledge in Quality Assurance, Quality Control and HSE plans.</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledgeable in HSE plans related to maintenance activities.</p><p>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</p><p><strong>Instruments:</strong></p><p>Knowledge of instrument control loops.</p><p>Familiar with Systems, Applications and Products in data processing (SAP).</p><p>Experience on Local control station/ Plant interface bus and DCS.</p><p>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</p><p>Good knowledge of Foundation Field bus Instrumentation .</p><p>Proficient in Functional safety , SIL &amp; ESD Instrumentation and Maintenance requirements.</p><p><strong>Soft:</strong></p><p>Leadership and people management skills</p><p>Demonstrated leadership impact to deliver improved and sustained performance</p><p>Through use of facts</p><p>Troubleshooting and result oriented</p><p>Able to build relationships within department staff and contractors with a focus on collaboration.</p><p>Ability to manage multiple priorities in a diversified and critical environment.</p><p>Verbal and writing reporting skills-effective Communication</p><p><strong>Technical</strong></p><p>Computer Literacy including MS Office</p><p>Root Cause Analysis (RCA)</p><p>Reading and interpreting engineering drawings</p><p>Project Management</p><p>Developing and Modifying Technical Procedures</p><p>Ability to align the requirements of operations and maintenance</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledge in estimating, budgeting, and cost control.</p><p>Process automation protocols, such as (HART, Profibus and SDS).</p><p>Entis Tank management system and tank gauging.</p><p>Instruments calibration.</p><p>Conducting Safety Integrated Level (SIL) Study.</p><p>Quality and safety standards.</p><p>Bid Review.</p><p></p></section>

<p>Supervise and coordinate all steel structure and sandwich panel erection activities on site. Plan daily work assignments and allocate manpower, tools, and equipment effectively. Ensure erection work is carried out in accordance with approved drawings, specifications, and project schedules. Monitor work quality and ensure compliance with project quality standards. Coordinate with the Site Engineer, Project Manager, client representatives, and subcontractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 years experience in sandwich panel manufacturing company.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Cybersecurity Reports To: IT Manager / Cybersecurity Manager Job Details Number of Vacancies: 3 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Cybersecurity Engineer is responsible for protecting the organization's information systems, networks, and digital assets from cyber threats. The role involves implementing security controls, monitoring security events, identifying vulnerabilities, and ensuring compliance with cybersecurity standards and best practices.</p><p>Key Responsibilities</p><ul><li>Monitor and analyze security events, alerts, and incidents across the organization's IT infrastructure.</li><li>Implement, configure, and maintain cybersecurity solutions such as firewalls, antivirus systems, endpoint protection, SIEM, and intrusion detection/prevention systems.</li><li>Conduct vulnerability assessments and security audits to identify and mitigate risks.</li><li>Investigate security incidents and coordinate response and recovery activities.</li><li>Develop and maintain cybersecurity policies, procedures, and standards.</li><li>Perform security monitoring and threat analysis to detect potential cyber threats.</li><li>Support the implementation of cybersecurity controls for new projects and systems.</li><li>Ensure compliance with applicable cybersecurity regulations, standards, and company policies.</li><li>Conduct security awareness training and provide guidance to employees on cybersecurity best practices.</li><li>Prepare security reports, risk assessments, and technical documentation.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li></ul><p>Technical Skills</p><ul><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li></ul><p>Working Conditions</p><ul><li>Office-based environment with occasional on-site support activities.</li><li>May require availability during cybersecurity incidents, emergencies, or planned maintenance windows.</li></ul><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p><br>Position: Pre-Sales Solutions Engineer<br>Location: Other<br>City: Muscat, Oman<br>Sector: Consulting<br>Years of Experience Fresh, 2-5 Years<br>Qualification: Degree in Computer Engineering, Computer Science, Artificial Intelligence, Information Technology, or a related field<br>Salary: Undisclosed<br>Workdays: 5 Working Days</p><p><strong>Desired Candidate Profile</strong></p><p><b>Responsibilities</b><br>Engage with enterprise IT departments in Oman to understand technical requirements, business challenges, and project objectives.<br>Support the presentation of the employers AI-native software development and product design services to technical and business stakeholders.<br>Assist in preparing technical proposals, solution outlines, presentations, and scope documentation aligned with the employers delivery methodology.<br>Collaborate with senior team members and the founder during client discussions related to scope, timelines, technical requirements, and commercial proposals.<br>Maintain regular communication with clients after project confirmation and support implementation follow-up through delivery.<br>Develop strong working relationships with CIOs, CTOs, IT managers, and other enterprise technology stakeholders.<br>Represent the employer professionally at technology events, enterprise IT forums, meetings, and networking activities across Oman.<br>Qualifications<br>Bachelor s degree in Computer Engineering, Computer Science, Artificial Intelligence, Information Technology, or a related field.<br>Fresh graduates with strong technical and communication capabilities are encouraged to apply; candidates with 2-5 years of experience in pre-sales, solutions engineering, technical account management, or a related client-facing technology role are preferred.<br>Foundational to intermediate understanding of AI, software development, software architecture, and digital product concepts.<br>Strong presentation, communication, relationship-building, and consultative problem-solving skills.<br>Fluent Arabic and English communication skills, both spoken and written.<br>Ability to work independently, manage multiple client interactions, and take ownership of assigned opportunities and follow-up activities.<br>Omani national or eligible for full Omani work authorization.</p>

<p>ENINE is seeking a Junior / Electrical Site Engineer / Civil Site Engineer.</p><p><br></p><p><span style="font-size: 11px;">Bachelor s degree in Civil Engineering.</span><br><span style="font-size: 11px;">Fresh graduates and experienced candidates are welcome to apply.</span><br><span style="font-size: 11px;">Good command of AutoCAD and Microsoft Office.</span><br><span style="font-size: 11px;">Strong communication, organization, and teamwork skills.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As part of the technical team, responsible for ensuring the appropriate cable designs for each project considering OCI s needs and capabilities, and the customers needs. Summary of the Job Role : Working on the commercial enquiry (Pre &amp; Post Order). Design cables in accordance with the parameters provided by applicable standards, customers and OCI. To support OCI s strategic goals and department KPI. Key Deliverables: PRE ORDER Understand the technical requirements of the customer in terms of cable and design the cable as per the project requirements. Analyze the customer needs with respect OCI product range &amp; provide the feedback. Support to Commercial team in timely response to customer enquiry with issuing the SAP codes, Technical documents like Datasheet (TDS), Cable Drawing (AutoCAD &amp; SolidWorks) and Clarification-deviation sheet. Preparation of BOM (Bill of Materials), TDS &amp; verify with specification s fictitious calculation &amp; manufacturing values. Preparation of CA Items, verify with the specification s design guidelines and manufacturing instructions. POST ORDER Ensure the final item codes, special instructions &amp; other technical information are provided as per final approved documents. DATA BASE Review &amp; issue Cable Datasheet, Cross-sectional Drawings &amp; BOM in OCI standard format. Maintaining commonly asked Clarification &amp; Deviation list. Work of Deviation points to comply for future enquiry.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in electrical engineering.</li><li>Knowledge of MS Office (Excel, PPT etc.), AutoCAD &amp; Solid Works.</li><li>Knowledge of Cable design tools.</li></ul><p></p></section>

<p><br></p><p>Welding Engineer - Job Description</p><p>Job Title: Welding Engineer</p><p>Job Summary: A Welding Engineer is responsible for planning, developing, supervising, and improving welding processes to ensure the quality, safety, and efficiency of fabrication and construction activities. They ensure compliance with industry standards, project specifications, and quality requirements in manufacturing, oil &amp; gas, construction, power, and infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:</li><ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul><li>Knowledge of international codes and standards:</li><ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></ul><p>Required Skills</p><ul><li>Strong knowledge of welding processes:</li><ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li></ul><p>Experience Requirements</p><ul><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Welding rejection/repair rate.</li><li>Productivity and welding efficiency.</li><li>Compliance with project quality requirements.</li><li>Number of qualified welders and procedures.</li><li>Safety performance and incident reduction.</li><li>On-time completion of welding activities.</li></ul><p>Reporting Structure</p><p>Reports To: QA/QC Manager, Fabrication Manager, Construction Manager, or Project Manager</p><p>Supervises: Welding Supervisors, Welders, Welding Technicians, and Welding Inspectors (as applicable).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:<ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul></li><li>Knowledge of international codes and standards:<ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></li><li>Strong knowledge of welding processes:<ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul></li><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>