مطلوب مهندسين بترول

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<ul><li><p>Operate assigned equipment (excavator, loader, forklift, crane, grader, etc.) safely and efficiently as per site and client requirements.</p><ol><li><p>Conduct pre-start and post-operation inspections of equipment, ensuring safe operating condition and reporting defects immediately.</p></li><li><p>Follow all HSE policies, Golden Rules, and Client Equipment Operation Guidelines during equipment use.</p></li><li><p>Assist in loading, unloading, lifting, and transporting materials in compliance with load handling and lifting standards.</p></li><li><p>Perform basic troubleshooting and first-line maintenance such as checking fuel, oil, hydraulics, cooling systems, brakes, and tires.</p></li><li><p>Adhere to Journey Management and Permit-to-Work (PTW) systems, ensuring operations are authorized and risk assessed.</p></li><li><p>Maintain accurate operation logs and usage records, reporting any incidents, near misses, or unsafe conditions.</p></li><li><p>Ensure equipment is kept clean and in proper working condition at all times.</p></li><li><p>Demonstrate awareness of desert/off-road operation procedures and towing/recovery guidelines in case of stuck or breakdown situations.</p></li><li><p>Follow supervisor’s instructions and complete tasks on time without operational or industrial wastage.</p></li><li><p>Follow the instructions of the supervisor and ensure timely completion of assigned tasks without causing industrial or operational wastage.</p></li><li><p>Any additional responsibilities as instructed by immediate supervisor or management.</p></li></ol></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Valid Oman Driving License (minimum 5 years old)</p></li><li><p>Valid OPAL Lifting Certificate</p></li><li><p>Valid RTITB Competent Card for the relevant equipment category</p></li><li><p>School Education with English writing and reading ability</p></li><li><p>Valid Omani Equipment Operator License for relevant category</p></li><li><p>Experience in O&G industry and knowledge of Defensive Driving will be added advantage</p></li><li><p>Knowledge of basic mechanical troubleshooting of heavy equipment.</p></li><li><p>Familiarity with lifting guidelines, load charts, and equipment safety protocols</p></li></ol><p><br></p>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><span>PIPECARE is seeking <strong>Data Analyst</strong> to join our team in Oman, specializing in the oil and gas industry.<br>PIPECARE provide complete Solutions to all aspects of all aspects of In Line- Solutions in the oil and gas industry and ensure pipeline integrity by providing highly accurate information for Maintenance and Repair Programs.<br> <br> <b>Position Summary</b> <br>General role for the Data Analyst includes identification obstructions in the pipeline. It shall be noted that PIPECARE has Subsidiaries around the world and although Data Analyst reports to Data Analyst Team Leader of that Subsidiary and to the corporate Data Analyst Manager, the responsibility of the Data Analyst is to ensure that all tasks and projects related to local subsidiary are executed according to the plan, corporate standards and policy approved by the Corporate Office.<br> <br> <b>Key Responsibilities &amp; Authorities</b> </span> <ul> <li> <ul> <li> <span>Checking and approving the tool performance during the PTT.</span> </li> <li> <span>Checking the data quality of ILI runs.</span> </li> <li> <span>Caliper Data Analysis.</span> </li> <li> <span>MFL Data Analysis.</span> </li> <li> <span>TFI Data Analysis.</span> </li> <li> <span>Checking and implementing dig verification tasks at sites and preparing relevant reports.</span> </li> <li> <span>Reviewing the software inter phase.</span> </li> <li> <span>Reviewing software user manuals.</span> </li> <li> <span>Preparing/Reviewing DAD quality documentation.</span> </li> <li> <span>To ensure accurate tool sensitivity values are provided to TM in Tool Checklist.</span> </li> <li> <span>To prepare a specific Run assessment report.</span> </li> <li> <span>To identify obstructions in the pipeline; to produce technically valid Preliminary / Final report (if applicable).</span> </li> <li> <span>To produce technically valid Preliminary / Final report.</span> </li> <li> <span>To inform HO-DAD about the results and/or to implement the results into the reports.</span> </li> <li> <span>To ensure that the coordinates are synchronized with the data.</span> </li> <li> <span>To alert the R&amp;D regarding the software problems.</span> </li> <li> <span>To update the documentation.</span> </li> <li> <span>To produce updated standard quality procedures.</span> </li> <li> <span>To alert the DA Team Leader / DA Manager regarding the software problems.</span> </li> <li> <span>Execute all other tasks as requested by DA Team Leader or DA Manager and/or Executive Team within the assigned job role.</span> </li> </ul> </li> </ul> <br> <span> <b>Skills/Experience required.</b> </span> <ul> <li> <ul> <li> <span>Bachelor s degree in engineering/technology, OR related degree (preferred but not limited to GIS Field, petrochemical background, pipeline integrity).</span> </li> <li> <span>Prior certification as ILI ASNT-PQ L2, or L3 Data Analyst in one or more of the following in-line inspection technologies: UTWM, UTCD, EMAT; or the ability to become certified</span> </li> <li> <span>Experience in contacts with clients (report presentations, software trainings etc.)</span> </li> <li> <span>Ability to learn proprietary software platforms; proficiency in Microsoft based applications is a must</span> </li> <li> <span>Database development and implementation experience</span> </li> <li> <span>Process analysis, requirement / functional specification development experience</span> </li> <li> <span>Quality assurance of databases, reporting experience</span> </li> <li> <span>Experience of working on large, complex and multiple databases</span> </li> <li> <span>Proficient in using analytical tools and instruments for instance Excel, Microsoft Access, Minitab and SPSS</span> </li> <li> <span>High ability to work with numbers</span> </li> <li> <span>Strong written and verbal communication skills</span> </li> <li> <span>Analytical mind which is able to process information logically</span> </li> <li> <span>Professional level of English language.</span> </li> </ul> </li> </ul> <p> <strong> <span>Physical and Mental Requirements:</span> </strong> </p> <ul> <li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li> <li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li> <li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li> <li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li> <li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments. </li> <li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li> </ul> <p><br></p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>1. Inspection &amp; Quality Control</strong> <ul> <li>Supervise and monitor coating activities including surface preparation, painting, and final coating.</li> <li>Ensure compliance with approved <strong>ITP (Inspection &amp; Test Plan)</strong> and project specifications.</li> <li>Conduct inspections for:<br> <ul> <li>Surface preparation (blasting, cleanliness SA 2.5 / SA 3)</li> <li>Profile measurement (anchor profile)</li> <li>Coating thickness (DFT/WFT)</li> <li>Holiday testing</li> <li>Adhesion testing</li> </ul> </li> <li>Verify environmental conditions (temperature, humidity, dew point) before and during coating.</li> </ul> <strong>2. Standards &amp; Compliance</strong> <ul> <li>Ensure coatings comply with standards such as:<br> <ul> <li>ISO 12944</li> <li>NACE / SSPC</li> <li>ASTM standards</li> <li>Project-specific coating specifications</li> </ul> </li> <li>Ensure correct paint systems are applied (e.g., epoxy, polyurethane, anti-corrosion coatings).</li> </ul> <strong>3. Documentation &amp; Reporting</strong> <ul> <li>Maintain and review coating inspection reports.</li> <li>Record daily inspection reports (DIRs) and test results.</li> <li>Validate paint batch certificates and material approvals.</li> <li>Ensure traceability of coating materials.</li> <li>Support preparation of final QC dossiers.</li> </ul> <strong>4. Material Control</strong> <ul> <li>Verify storage and handling of coating materials as per manufacturer recommendations.</li> <li>Check shelf life and batch numbers of paints.</li> <li>Ensure correct mixing ratios and application procedures.</li> </ul> <strong>5. Coordination</strong> <ul> <li>Coordinate with:<br> <ul> <li>Production/Construction teams</li> <li>Client inspectors</li> <li>Third-party inspectors</li> </ul> </li> <li>Attend inspection requests (IRs) and witness hold points with client.</li> </ul> <strong>6. NCR &amp; Corrective Actions</strong> <ul> <li>Raise Non-Conformance Reports (NCRs) for deviations.</li> <li>Ensure corrective and preventive actions are implemented.</li> <li>Monitor rework activities and closure of NCRs.</li> </ul> <strong>7. Safety &amp; Compliance</strong> <ul> <li>Ensure coating activities follow HSE guidelines.</li> <li>Monitor safe handling of chemicals, paints, and solvents.</li> <li>Promote safe work practices in blasting and painting operations.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><strong>Qualifications &amp; Experience:</strong> <strong>Education:</strong> </p><ul> <li>Diploma/Degree in Mechanical, Metallurgical, or Corrosion Engineering</li> </ul> <strong>Certifications (Preferred/Required):</strong> <ul> <li>NACE Level II / III or</li> <li>BGAS / ICorr or</li> <li>SSPC Certification</li> </ul> <strong>Experience:</strong> <ul> <li>5 10 years in coating inspection, preferably in:<br> <ul> <li>Offshore platforms</li> <li>Oil &amp; Gas fabrication yards</li> <li>EPC projects</li> </ul> </li> </ul> <strong>Skills &amp; Competencies:</strong> <ul> <li>Strong knowledge of surface preparation and coating techniques</li> <li>Familiarity with offshore coating systems and corrosion protection</li> <li>Good understanding of international codes and standards</li> <li>Strong documentation and reporting skills</li> <li>Ability to interact with clients and third-party inspectors</li> <li>Attention to detail and quality-focused mindset</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Oversee daily office operations, correspondence, and documentation.</li><li>Support procurement activities, including vendor coordination, purchase requisitions, and follow-ups.</li><li>Maintain records related to contracts, tenders, and compliance requirements.</li><li>Coordinate travel, meetings, and logistics for management and project teams.</li><li>Assist HR and finance with staff records, timesheets, and expense reporting.</li><li>Ensure compliance with HSE procedures and ISO standards in administrative and procurement practices.</li><li>Ensure effective communication between the office, site teams, and client representatives.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor’s degree in Business Administration, Supply Chain Management, or a related field.</li><li>Minimum <strong>5 years of experience</strong> in office administration, with exposure to the <strong>Oil &amp; Gas industry</strong>.</li><li>Knowledge of procurement processes and vendor management.</li><li>Proficiency in MS Office; ERP/Procurement systems experience is an advantage.</li><li>Strong knowledge of procurement processes, vendor management, HSE, and ISO standards.</li><li>Excellent communication skills in English (Arabic is a plus).</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Service / Maintenance Supervisor</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: Diploma in Electronics And Instrumentation, Instrumentation And Control Engineering</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design &amp; Commissioning Engineer Security &amp; Telecom Summary Engineering Graduate with minimum 5-7 years of relevant experience in commissioning of Security system products like Milestone, Genetec, Lenel, CEM System, Softwarehouse, Honelywell, Bosch, Gallaget, Senstar and Southwest Microwave, responsible entire commissioning and technical compliance. Key Job responsibilities and duties Reporting to Technical Lead on all technical related points Analyze system hardware and software requirements for all assigned Security &amp; Telecom System Project BOQ and design properly as per Project requirement Review and ensure Technical Correctness of MAS and Procurement. Designs and/or engineers Security &amp; Telecom systems including but not limited to Access Control system, physical security, intrusion, Video Management System, Fiber optic solution, Structured Cabling solutions, Networking, Telephony, Storage etc. Defines all Technical architectures components including, hardware, software, OS, performance and monitoring of projects assigned, in alignment with all compliance and best practice guidelines. Completes all system design(s) and engineering to core engineering standards. Acts as technical design owner and subject matter expert for assigned projects. Guide and Check system design layouts and installation specifications, including design documents and drawings prepared by Draughtsman/Team. Recommends the use of existing and new technologies to ensure core objectives are met for all security and Telecom projects. Conduct analyses and provide direction and support for Sales/Procurement/Service/Project Team. Maintains expertise in the principles and techniques required for hardware and software system integration. Responsible for all system upgradation and ensure the systems are having latest update. Maintains knowledge of current and emerging technologies and industry best practices related to all security &amp; Telecom systems. Proposes and implements best practices and tools supporting these technologies and practices. Develops system integration skills. Attends industry seminars and /or training sessions in order to stay current with all new security technologies and integration principles. Responsible for successful completion of Factory Acceptance Test, Commissioning, Site Acceptance Test and Client approvals for assigned projects. Develop and articulates a coherent technology architecture and system wide integration for all the Technical Security Systems as project requirement. Inspect, review and approve the erection, cabling and termination works at site as required. Coordinate with system vendors and customer as necessary to implement, integrate, update and test the system. Responsible to maintain the technical documentation as per the standards. Provide the commissioning report, checklist, cause and effect matrix etc., Responsible in managing Teams in delivering client SLA without NCR and in meeting client expectations. Responsible for all technicalities and Level2 &amp; Level3 support to teams in maintaining the Low current systems like CCTV Surveillance Systems, Electronic Access Control Systems, Gates &amp; HVM, PIDS, Electrified Fence, BMS, LCS, AV systems, ICT and Telecom Systems etc. Responsible for all system upgradation and ensure the systems are having latest update. Perform &amp; work on all upgradations [to keep up the systems to latest versions] as per OEM guidelines, migrations, and expansion works in all aspects. Also, to ensure all integration works and compatibility. Responsible for SSA/CarePlus/SUP, and maintaining all clients. Highlight the renewal date of SSA/Careplus/SUP timely to get it renewed. Responsible for handing client technical queries. Conduct Training for Customer and In-house Team. Technical Presentation and lead POC/Demo to customer as required. Responsible to maintain the technical documentation as per the standards. Ensure the client satisfaction throughout the project phase in terms of technical. KPI: K.P.I sTarget % A) System commissioning, SAT and client approvals as per project schedule in line with contractual requirements and product specifications and capabilities. Commissioning the systems, up to the product specs and client expectations in line with the product capabilities B) Pro-active Pre-commissioning and timely and trouble-free commissioning works 35%To maintain all client systems up to date version, and successfully manage upgradation works, Expansion, migration works, to ensure efficient integrations and its compatibility.20%Client SLA and satisfaction levels. In meeting best performance as per ERP analysis.10%Technical documentation works, Service Analysis, better communication internal and external, regular DAR etc10%Expert knowledge on Milestone Xprotect, CEM Systems AC2000, Lenel OnGuard, Pelco VideoXpert, Paxton, Gallagher etc., Technical and Expert Support Levels for all products, and in maintaining product certifications.10%Client Relation and Handlings5%Attitude, Punctuality, Interpersonal skills5%Ensure QHSE and ISO compliance and no NCR in ISO implementation related to Project &amp; service Operations5%</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT Experience - Engineering Graduate with minimum 5-7 years of relevant experience in managing major turnkey EPC security projects. Preferred Experience of 2-3 years in Middle East region &amp; having valid Oman driving license. 2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as commissioning Engineer position. The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc. In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</p><p></p></section>

<p>The Project HSE Lead will act as the focal point for all Health, Safety, and Environmental (HSE) matters related to project activities within the fabrication yard. The role ensures full compliance with COMPANY (e.g., Qatar Energy/Aramco) HSE requirements, local statutory regulations, and CONTRACTORs HSE Management System while supporting safe and efficient project execution. Primary responsibilities include:</p><ul><li>Assist in the development and execution of the Project HSE Plan, Emergency Plan etc. ensuring alignment with COMPANY standards.</li><li>Provide expert advice to Project Management, Construction Managers, and Supervisors on HSE issues and risk control measures.</li><li>Monitor, audit, and report on HSE performance, including weekly reports to COMPANY.</li><li>Facilitate HSE training, awareness programs, and competency development for yard personnel.</li><li>Conduct risk assessments, HAZID reviews.</li><li>Investigate incidents, near misses, and unsafe conditions; identify root causes and establish corrective/preventive measures.</li><li>Address COMPANY observations promptly and support third-party / client audits.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 15 years of HSE experience in heavy fabrication yards, oil &amp; gas, offshore structures, or EPC projects, with at least 5 years in a leadership role.</p><p>Previous exposure to Saudi Aramco projects, QE or other major offshore clients in Lead role</p><p>Proven experience in managing HSE systems for large-scale fabrication, lifting, welding, and offshore loadout operations.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction &amp; commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints &amp; critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical or Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil &amp; gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal &amp; communication skills and an extrovert. </p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p><p></p></section>

<p>Candidates Must Have 5+ Yrs. Experience In Civil Construction For Oil &amp; Gas Projects</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates Must Have 5+ Yrs. Experience In Civil Construction For Oil &amp; Gas Projects</p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p>Lead process technology and engineering activities across operations, maintenance, and capital projects. Provide technical leadership in process engineering, plant optimization, and troubleshooting. Support plant expansions, modifications, commissioning, and start-up activities. Review and approve process engineering designs, calculations, and technical deliverables. Identify and resolve complex process-related operational challenges. Lead process safety studies including HAZOP, SIL assessments, and technical risk reviews. Drive Advanced Process Control (APC) initiatives to improve plant stability, performance, and efficiency. Monitor process performance and recommend improvements to increase reliability and production efficiency. Support engineering studies, feasibility evaluations, and technology assessments. Act as the subject matter expert for process technology and provide technical guidance to cross-functional teams. Participate in failure investigations and root-cause analyses for process-related incidents. Ensure compliance with company standards, engineering practices, and HSE requirements. Manage interfaces with contractors, consultants, vendors, and internal stakeholders. Promote innovation, digitalization, and the adoption of emerging technologies. Mentor and develop junior engineers while fostering a culture of continuous improvement and technical excellence.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Chemical Engineering, Process Engineering, Physics, or a related discipline. Minimum 10 years of experience in the Oil &amp; Gas, Chemical, Energy, or related industries. Minimum 5 years of technical engineering experience in a processing or industrial environment. Strong experience in process engineering, plant operations support, process safety, and technical troubleshooting. Experience supporting major industrial projects, commissioning, and plant modifications. Knowledge of Advanced Process Control (APC), HAZOP, SIL studies, and process optimization methodologies is highly desirable.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide expert advisory support to the VP, Business Development on the identification, evaluation, and pursuit of new business opportunities, ensuring sound strategic and commercial judgment is applied across OQEP's business development activities in alignment with corporate growth objectives and Oman's national energy priorities.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Advise the VP, Business Development on the identification, screening, and prioritization of new business opportunities, providing expert insight on strategic fit, commercial viability, and risk profile.</p><p>Provide senior-level guidance on the evaluation of farm-in, farm-out, merger, acquisition, and divestment opportunities, drawing on extensive industry experience to inform decision-making.</p><p>Support the development of OQEP's business development strategy, providing advisory input on market trends, competitive positioning, and emerging opportunities in the regional and international upstream landscape.</p><p>Advise on the structuring of commercial terms, negotiation strategies, and deal structures for new business opportunities, working closely with Legal, Finance, and Technical teams.</p><p>Provide expert input into the preparation of investment proposals, business cases, and Project Initiation Notes for new business development opportunities presented to the Executive Leadership Team and Board.</p><p>Support due diligence processes for new business opportunities, providing senior oversight and quality assurance on technical, commercial, and strategic assessments.</p><p>Build and maintain relationships with potential partners, investors, government entities, and industry stakeholders to identify and develop new business opportunities.</p><p>Provide mentorship and knowledge transfer to business development team members, sharing industry expertise and lessons learned from prior transactions and opportunities.</p><p>Monitor regional and global industry developments, including new licensing rounds, asset sales, and market entrants, advising on potential implications for OQEP's growth strategy.</p><p>Represent OQEP in discussions, conferences, and forums related to new business development and industry partnerships as required.</p><p>Provide advisory support on benchmarking and competitor analysis to inform OQEP's business development positioning and strategy.</p><p>Support the VP, Business Development in preparing materials and recommendations for Executive Leadership Team and Board-level decision-making on new business opportunities.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p>Internal: Business Development function, Commercial function, Legal function, Finance function, Subsurface function, Executive Leadership Team.</p><p>External: Potential investment and JV partners, government entities, industry bodies, investment banks and financial advisors, consultants.</p><p>Notable Working Conditions. Frequent business travelling including field trips. Office environment with moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education requirements</strong></p><p>Required: Bachelor's degree in Petroleum Engineering, Geosciences, Business Administration, Finance, or related field.</p><p>Preferred: Postgraduate qualification (Master's, MBA, or PhD); professional certifications relevant to business development, finance, or upstream commercial transactions are an advantage.</p><p><strong>Language requirements</strong></p><p>Excellent knowledge of written, read, and spoken English (required), other languages will be a plus.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>Minimum of 14+ years experience in the Oil &amp; Gas industry, preferably across investments, exploration, development, and production activities.</p><p>Strong experience &gt;10 years in investment analysis, corporate finance, business development, or commercial roles M&amp;A, and portfolio assessment within oil &amp; gas or energy sector.</p><p>Experience in resource control, contract management, and commercial processes</p><p>Strong in financial modeling, petroleum economics valuation skills, as well as knowledgeable in energy market dynamics.</p><p><strong>Soft:</strong></p><p>Strategic thinking and sound commercial judgment.</p><p>Excellent communication, negotiation, and influencing skills.</p><p>Ability to advise and engage senior leadership and external stakeholders with credibility.</p><p>Strong stakeholder management and relationship-building skills.</p><p>Analytical and structured problem-solving approach.</p><p>High degree of professional integrity and discretion.</p><p>Cultural sensitivity in a multinational environment.</p><p><strong>Technical:</strong></p><p>Computer literacy including MS Office (advanced Excel and PowerPoint).</p><p>Business development and new venture evaluation methodologies.</p><p>Mergers, acquisitions, and divestment transaction processes.</p><p>Upstream commercial agreements (EPSAs, JOAs, farm-in/farm-out).</p><p>Financial and economic evaluation of investment opportunities.</p><p>Due diligence processes and risk assessment.</p><p>Market and competitor analysis.</p><p>Negotiation and deal structuring.</p><p></p></section>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>