وظائف مهندس موقع

<p>Duties and responsibilities:</p><p>Monitoring site work according to drawings and specifications.</p><p>Supervising workers and laborers in daily work chaos.</p><p>Monitoring the quality of execution and quantity surveying; drawing is not required.</p><p>Coordinating with project management, the consultant, and contractors.</p><p>Preparing daily work reports and following up on results.</p><p>Adherence to safety instructions and professional conduct within the site.</p><p>Required qualifications:</p><p>Previous experience in contracting and finishing works.</p><p>Proficiency in reading drawings and quantity surveying.</p><p>Ability to manage labor and organize tasks.</p><p>Commitment, discipline, and ability to handle work pressure.</p>

<p><strong>Position Summary</strong></p><p>The Site Engineer will be responsible for the day-to-day execution, management, and supervision of potable water pipeline construction activities.&nbsp;</p><p>The successful candidate must demonstrate the ability to operate independently on-site, managing field resources, tracking daily progress, and overcoming construction challenges with minimal supervision.&nbsp;</p><p>This role requires seamless communication and reporting to the Project Manager to ensure project deliverables are achieved safely, on schedule, within scope, and in strict compliance with engineering specifications.</p><p><strong>Key Responsibilities</strong></p><p>Site Management &amp; Execution</p><ul><li>Supervise and drive the daily construction activities of potable water pipeline installations, including excavation, pipe laying, jointing, thrust block construction, backfilling, and compaction.</li><li>Manage onsite sub-contractors, laborers, plant machinery, and material resources individually to ensure efficient field workflows.</li><li>Conduct field inspections to verify that all work aligns with approved engineering drawings, method statements, and structural parameters.</li><li>Direct pressure testing, hydrotesting, flushing, and disinfection protocols for newly laid potable water pipelines before commissioning.</li></ul><p>Reporting &amp; Project Coordination</p><ul><li>Coordinate closely with the Project Manager to track project timelines, resource allocations, and budget milestones.</li><li>Generate and submit precise daily, weekly, and monthly site progress reports, documenting work completed, delays, equipment utilization, and labor hours.</li><li>Act as the primary onsite point of contact, resolving field issues independently while escalating complex variations or delays to the Project Manager immediately.</li><li>Liaise with client representatives, consultants, and local authorities during routine site inspections and quality sign-offs.</li></ul><p>Quality Assurance &amp; Safety Compliance</p><ul><li>Maintain strict quality control metrics over all incoming pipeline materials, ensuring proper handling and storage of pipes, valves, and fittings.</li><li>Implement and enforce all company Health, Safety, and Environment (HSE) policies onsite, targeting zero incidents.</li><li>Ensure accurate site surveying, alignment verification, and the preservation of levels as dictated by the design specifications.</li></ul><p><strong>Requirements &amp; Qualifications</strong></p><p>Experience &amp; Education</p><ul><li><strong>Minimum Experience:</strong> 5+ years of verified site engineering experience dedicated to pipeline infrastructure works, specifically focused on potable water transmission and distribution networks.</li><li><strong>Education:</strong> Bachelor’s Degree or Diploma in Civil Engineering, Mechanical Engineering, or a closely related construction discipline.</li><li><strong>Technical Knowledge:</strong> Deep familiarity with water pipeline materials (such as DI, HDPE, PVC, and Carbon Steel), jointing techniques, valve chambers, testing mechanisms, and standard utility standards.</li></ul><p>Key Competencies</p><ul><li><strong>Autonomy:</strong> Proven ability to manage a construction site individually, handle rapid decision-making under pressure, and drive productivity independently.</li><li><strong>Software Proficiency:</strong> Basic proficiency in AutoCAD for checking layout designs and MS Office (Excel, Word) for administrative reporting.</li><li><strong>Communication:</strong> Strong interpersonal and report-writing skills to build working relationships across sub-contractors and project executives.</li></ul><p>Preferred Assets (Added Advantage)</p><ul><li><strong>Driving License:</strong> Possession of a valid, active driving license is highly preferred and considered a significant advantage for field mobility across site segments.</li></ul>

<p>Required Mechanical&nbsp; Site Supervisor<br>Diploma in mechanical, Having Experience in plate and structure fabrication, Shutdown work.&nbsp;<br>Industry:&nbsp; preferably cement, steel, fertilizer industry experience.</p>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction & commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints & critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil & gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal & communication skills and an extrovert.</p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Middle east project experience</li><li>Construction phase project experience (not O&amp;M only)</li><li>Large scale project experience (multiple 200MW + projects)</li><li>Locally available candidates may apply</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>We are hiring below mention manpower for Oman.</p><p><span >Candidate should have 6 to 8 years of exp in oil &amp; gas,petrochemical &amp; Refinery with NDT Level - 2 &amp; CSWIP certified.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Urgent Requirement for Oman Estimation Engineer ,Highway Highway Design Engineer, Candidates Must have relevant experience in road constructions, structural,Gulf Experience is Must.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates Must have relevant experience in road constructions, structural,Gulf Experience is Must.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> WE’RE HIRING – BIOMEDICAL ENGINEER! </p><p><br></p><p> Are you a Biomedical Engineer with strong hands-on experience?</p><p> Laser experience? That’s a BIG PLUS!</p><p><br></p><p>We’re looking for a skilled and experienced professional to join our team URGENTLY.</p><p><br></p><p>✨ Position: Biomedical Engineer</p><p> Key Requirement: Experience with Medical Lasers &amp; Equipment</p><p> Salary: OMR 300–450 (depending on experience)</p><p>⚡ Joining: Immediate</p><p><br></p><p>If you’re technically strong, hands-on, and ready for your next opportunity — we want to hear from you!</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Experience with Medical Lasers &amp; Equipment</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Key Responsibilities</strong></span></p><br><ul><li><span>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.</span></li><li><span>Support the development and maintenance of engineering standards, specifications, and procedures.</span></li><li><span>Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.</span></li><li><span>Manage and control site activities to achieve project objectives within approved schedule and budget constraints.</span></li><li><span>Prepare and present project progress reports, forecasts, and status updates to management.</span></li><li><span>Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.</span></li><li><span>Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.</span></li><li><span>Evaluate proposed projects and provide technical recommendations.</span></li><li><span>Prepare technical reports, specifications, and supporting project documentation.</span></li><li><span>Monitor and assess contractor performance and compliance with project requirements.</span></li><li><span>Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.</span></li><li><span>Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</span></li></ul> a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}<br><p><span><strong>Qualifications</strong></span></p><br><ul><li><span>Bachelor's degree in Mechanical Engineering.</span></li><li><span>Master's degree in Engineering, Management, or a Project Management certification is advantageous.</span></li><li><span>Chartered Engineer status is considered an advantage.</span></li></ul><p><span><strong>Experience &amp; Skills</strong></span></p><br><ul><li><span>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.</span></li><li><span>Experience in brownfield industrial projects is preferred.</span></li><li><span>Strong knowledge of project management principles and practices.</span></li><li><span>Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).</span></li><li><span>Working knowledge of engineering and drafting software such as AutoCAD.</span></li><li><span>Experience with project planning software such as Microsoft Project and/or Primavera.</span></li><li><span>Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.</span></li><li><span>Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.</span></li><li><span>Proven experience managing contractors and multidisciplinary project teams.</span></li><li><span>Strong written and verbal communication skills, including technical reporting.</span></li><li><span>Demonstrated decision-making, coordination, and stakeholder management capabilities.</span></li><li><span>Knowledge of standard contract terms and conditions.</span></li><li><span>Working knowledge of industrial safety practices and project execution requirements.&nbsp;</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p> <p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Assist in implementing maintenance strategies to improve system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support asset lifecycle management and replacement planning activities.</p> <p>Provide technical support for automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and operational readiness activities.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Assist with automation system configuration, maintenance, and performance optimization.</p> <p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Support backup, restore, and disaster recovery activities.</p> <p>Assist with software version control and change management processes.</p> <p>Support testing and verification of DCS, PLC, and SCADA modifications.</p> <p>Maintain automation documentation, logic diagrams, and system records.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p> <p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p> <p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p> <p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p> <p>Ensure technical documentation remains updated following approved modifications.</p> <p>Participate in post-change reviews and verification activities.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support process control and automation improvement initiatives.</p> <p>Analyze process performance and identify opportunities for control-loop optimization.</p> <p>Assist with control-loop tuning and performance monitoring.</p> <p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance</p> <p>IT/OT CYBERSECURITY INTERFACE</p> <p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p> <p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p> <p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p> <p>Support cybersecurity-related upgrades and remediation activities.</p> <p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p> <p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy&nbsp;</p>

<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>

<p>Manage instrumentation and control activities across the DRI Plant. Support installation, testing, commissioning, start-up, and maintenance activities. Review P&amp;IDs, instrumentation datasheets, control system architecture, and technical drawings. Support FAT, SAT, testing, and performance verification activities. Monitor and troubleshoot DCS, PLC, SIS/ESD, and SCADA systems. Coordinate with technology licensors, vendors, EPC contractors, and internal teams. Support preventive and corrective maintenance activities. Lead and support instrumentation engineers, supervisors, and technicians. Ensure compliance with applicable HSE and technical standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Instrumentation, Electronics, Electrical &amp; Instrumentation Engineering, or a related discipline with 10 15 years of relevant experience; OR Diploma in Instrumentation Engineering with 12 18 years of relevant experience. Minimum 8 years of experience with MIDREX or HYL/ENERGIRON technology. Strong knowledge of DCS and PLC systems. Experience with SIS/ESD, SCADA, and industrial control systems. Exposure to Siemens PCS 7 is highly preferred. Knowledge of SAP PM/MM, HART, Modbus, HAZOP, and SIL is an advantage. Strong commissioning, start-up, maintenance, and troubleshooting experience. Good English communication skills.</p>

<p>Plan, design and supervise civil engineering projects including roads ,bridges, buildings, drainage, water supply and other infrastructure</p>

<p><b>1. Job Title : Asst Project Manager</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC required) Industry</p><p>Exposure: Hospital/Commercial/ Residential Projects</p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p><b><br></b></p><p><b>2. Job Title : Project Engineer</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC 810 years) (Hospital/Commercial/ Residential Projects)</p><p><br></p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p>3. Job Title : Civil Engineer</p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 68 years (GCC 46 years) (Hospital/Commercial/ Residential Projects;</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><b><br></b></p><p><b>4. Job Title : Quantity Surveyor</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 810 years (GCC 56 years,)Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><br></p><p><b>5. Job Title : Civil Foreman</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 1 012 years (GCC 6 years), Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Diploma / Bachelor in Electrical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>Developing Safe work method. Preparation of Hazards Identification and Risk Assessment (HIRA). Aspect Impact Study, Emergency Response Plan (ERP). Preparing Project specific EHS Plans. Investigating all serious incidents &amp; initiate necessary corrective &amp; preventive actions at sites and Analyse incident trends &amp; initiate necessary Proactive measures at Project sites. Conducting Internal audit and identify Non - conformities and follow up for corrective action Review and monitoring EHS performance of sites including compliance to legal requirements Complying with contractual conditions &amp; fulfilling customer requirements Identifying the training need, designing and imparting training for Staff, subcontractor, workmen, visitors and develop module Ensuring Quality of PPE its adequate availability at site. Knowledge of conduction regular/periodic inspection Promoting EHS culture through campaign &amp; competition</p>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<p><b>❖ PIPELINE ENGINEER</b></p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Degree/Diploma in Mechanical Engineering. Experience: Minimum 7 years relevant Oil &amp; Gas</p><p>construction experience, including 5 years in the Middle East, in a supervisory position.</p><p>Technical Skills: Strong knowledge of pipeline welding, lowering, HSS coating, STOPAQ application and box-up activities.</p><p>Test Packs &amp; Documentation: Prepare test packs, review as-built drawings, and ensure completed works comply with Company standards before handover.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>HYDROTEST ENGINEER</p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Diploma or Bachelor's Degree in Engineering, preferably Mechanical Engineering.</p><p>Experience: Minimum 7 years relevant experience in onshore Oil &amp; Gas construction, including 5 years in Middle East Oil &amp; Gas in a supervisory role.</p><p>Hydrotesting Experience: Strong experience in pipeline and piping hydrotesting, including cleaning, gauging and pressure testing activities.</p><p>Technical Skills: Sound knowledge of hydrotest</p><p>procedures, specifications, standards, documentation and site execution.</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>