وظائف مهندس تفتيش هندسي في سلطنة عمان

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Project Engineer Reports To: Project Manager / Engineering Manager Job Details Number of Vacancies: 1 Position Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Project Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p>Key Responsibilities Assist in the planning, scheduling, and execution of engineering and technical projects. Coordinate project activities with internal departments, contractors, consultants, and vendors. Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements. Prepare project documentation, reports, specifications, drawings, and progress updates. Review engineering designs, technical documents, and project deliverables. Support procurement activities by reviewing technical specifications and evaluating vendor proposals. Conduct site inspections and supervise project implementation activities. Identify project risks and support the development of mitigation plans. Ensure compliance with company policies, safety regulations, quality standards, and industry best practices. Participate in project meetings and provide technical recommendations and solutions. Assist with project testing, commissioning, handover, and closeout activities. Maintain accurate project records and documentation throughout the project lifecycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required) Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><p>Basic knowledge of project management principles and methodologies. Familiarity with project planning tools such as Microsoft Project or Primavera. Understanding of engineering drawings, specifications, and technical documents. Basic knowledge of budgeting, cost control, risk management, and project reporting. Awareness of engineering standards, quality systems, and safety regulations. Proficiency in Microsoft Office applications.</p><h2>Soft Skills</h2><p>Strong analytical and problem-solving skills. Good communication and interpersonal abilities. Willingness to learn and develop professionally. Ability to manage multiple tasks and meet deadlines. Strong teamwork and coordination skills. Attention to detail and commitment to quality.</p><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p><strong>Job Title:</strong> Site Engineer</p><p><strong>Reports To:</strong> Project Manager / Construction Manager</p><p><strong>Job Details</strong></p><p>Number of Vacancies: 9</p><p>Position Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p><strong>Job Purpose</strong></p><p>The Site Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p><strong>Key Responsibilities</strong></p><ul><li>Assist in the planning, scheduling, and execution of engineering and technical projects.</li><li>Coordinate project activities with internal departments, contractors, consultants, and vendors.</li><li>Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements.</li><li>Prepare project documentation, reports, specifications, drawings, and progress updates.</li><li>Review engineering designs, technical documents, and project deliverables.</li><li>Support procurement activities by reviewing technical specifications and evaluating vendor proposals.</li><li>Conduct site inspections and supervise project implementation activities.</li><li>Identify project risks and support the development of mitigation plans.</li><li>Ensure compliance with company policies, safety regulations, quality standards, and industry best practices.</li><li>Participate in project meetings and provide technical recommendations and solutions.</li><li>Assist with project testing, commissioning, handover, and closeout activities.</li><li>Maintain accurate project records and documentation throughout the project lifecycle.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of project management principles and methodologies.</li><li>Familiarity with project planning tools such as Microsoft Project or Primavera.</li><li>Understanding of engineering drawings, specifications, and technical documents.</li><li>Basic knowledge of budgeting, cost control, risk management, and project reporting.</li><li>Awareness of engineering standards, quality systems, and safety regulations.</li><li>Proficiency in Microsoft Office applications.</li></ul><h2>Soft Skills</h2><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and interpersonal abilities.</li><li>Willingness to learn and develop professionally.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>Strong teamwork and coordination skills.</li><li>Attention to detail and commitment to quality.</li></ul><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<p>A Welding Quality Control (QC) Engineer is a specialized professional responsible for ensuring that all welding operations meet defined quality, safety, and technical standards throughout a project or manufacturing process.</p><p>Responsibilities</p><ul><li>Inspect welds using visual and NDT methods (UT, RT, MT, PT).</li><li>Develop and review WPS, PQR, and welder qualification records.</li><li>Ensure compliance with codes such as AWS D1.1, ASME IX, API 1104.</li><li>Monitor preheat, interpass temperature, and PWHT.</li><li>Prepare NCRs, inspection reports, and quality documentation.</li><li>Control material and consumable traceability.</li><li>Coordinate with clients, third-party inspectors, and project teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Age limit is 24-50</p><p>Need Gulf Experience</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Quality Control (QC) Engineer – Construction Excellence Specialist<br></strong><br> Are you a detail-driven engineer passionate about delivering exceptional quality in large-scale construction projects? Join a dynamic team where your expertise in quality control systems will directly impact the successful execution and handover of complex infrastructure. As a QC Engineer, you will be at the forefront of maintaining rigorous construction quality management standards, collaborating closely with site teams, subcontractors, and project leaders to ensure every deliverable meets contractual and regulatory requirements. Your role is pivotal in driving quality processes, identifying issues early, and championing continuous improvement that safeguards the integrity and safety of our projects.<br> Required Skills<ul><li>Strong knowledge and practical experience in implementing construction Quality Control (QC) management systems.</li><li>Proven ability to assist in planning, developing, and executing quality programs aligned with contract and project quality plans.</li><li>Experience reviewing and approving product/material requisitions and subcontractor quality documentation, including Quality Management Systems, quality plans, and Inspection Test Plans (ITPs).</li><li>Skilled in conducting quality inductions, monitoring inspections, and assessing contractor compliance with QC procedures.</li><li>Proficiency in data management relating to QC records, non-conformance reports (NCRs), and turnover documentation.</li><li>Excellent communication skills to promote quality awareness and deliver targeted training.</li><li>Proficient in Microsoft Office Suite.</li></ul>Nice to Have Skills<ul><li>Familiarity with international standards such as EN standards, ASME code, EN1090 (structural steel), and the Pressure Equipment Directive (PED) for piping.</li><li>Quality Auditor certification from a recognized industry body.</li><li>Experience with construction completion and turnover management processes.</li><li>Understanding of Romanian regulatory requirements (ISCIR, INSEMEX, ISU, AFER, ANRE, RENAR, ISC).</li></ul>Preferred Education and Experience<ul><li>Bachelor’s degree in Engineering or a closely related discipline.</li><li>Minimum of 5 years of hands-on experience working in quality roles within EPC (Engineering, Procurement, and Construction) contract environments.</li><li>Demonstrated background in welding engineering, supported by relevant training or internationally recognized courses.</li></ul>Other Requirements<ul><li>Ability to work collaboratively with multidisciplinary teams and subcontractors on site.</li><li>Proven organizational skills for maintaining robust QC documentation and reporting.</li><li>Willingness to engage in local management reviews and continuous improvement initiatives.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Testing &amp; Commissioning Roles &amp; Responsibilities</p><br><p>The T&amp;C engineer is responsible for planning test procedures, coordinating with construction teams, verifying equipment installation, and conducting functional and performance tests. Supervisors assist in site inspections, documentation, and ensuring safety compliance. Technicians execute testing activities, record readings, and report abnormalities. Quality and safety teams ensure adherence to regulations and risk control measures. Proper documentation, reporting, and handover to the client are key responsibilities, ensuring the system is reliable, efficient, and ready for operation.</p><br><p>From Basic Cable schedule preparation, LVAC &amp; LVDC Commissioning, GIS &amp; CRP Interlock, Scheme Tests,</p><br><p>Auxiliary Relay Test, Back up Relay Test &amp; Remote End modification works etc</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>MEP MAINTENANCE ENGINEER</p><p>Coordinate technicians and contractors for planned and reactive maintenance Supervisor.</p><p>Understanding of SLAs, KPIs, and asset lifecycle management</p><p>Review and ensure implementation of preventive maintenance schedules.</p><p>Monitor system performance using BMS and CMMS platforms.</p><p>Serve as the primary technical liaison between the facilities management team and the clients representatives Attend regular meetings with the client to discuss maintenance activities, ongoing issues, and upcoming projects.</p><p>Provide timely and clear updates, technical reports, and recommendations to the client.</p><p>Ensure client satisfaction by promptly addressing concerns and coordinating effective solutions.</p><p>Conduct site inspections, issue technical reports, CAPA , HSE Reports and ensure safety compliance and well versed with FM Industry standards</p><p>INSTRUMENTATION ENGINEER esign, install, test, and commission instrumentation and control systems for industrial projects.</p><p>Develop and review instrumentation drawings, P&amp;IDs, loop diagrams, hook-up drawings, and cable schedules.</p><p>Select and specify field instruments such as pressure, temperature, flow, and level transmitters.</p><p>Install, calibrate, troubleshoot, and maintain instrumentation equipment.</p><p>Configure and maintain PLC, DCS, SCADA, and control systems.</p><p>Perform preventive, corrective, and predictive maintenance of instrumentation systems.</p><p>Conduct loop checking, functional testing, FAT, SAT, and commissioning activities.</p><p>Diagnose and resolve instrumentation and control system faults to minimize downtime.</p><p>Ensure all instrumentation complies with project specifications, industry standards, and safety regulations.</p></div></section>

<p><b>1. Job Title : Asst Project Manager</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC required) Industry</p><p>Exposure: Hospital/Commercial/ Residential Projects</p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p><b><br></b></p><p><b>2. Job Title : Project Engineer</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC 810 years) (Hospital/Commercial/ Residential Projects)</p><p><br></p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p>3. Job Title : Civil Engineer</p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 68 years (GCC 46 years) (Hospital/Commercial/ Residential Projects;</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><b><br></b></p><p><b>4. Job Title : Quantity Surveyor</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 810 years (GCC 56 years,)Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><br></p><p><b>5. Job Title : Civil Foreman</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 1 012 years (GCC 6 years), Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Diploma / Bachelor in Electrical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervise the installation, testing, and commissioning of LV and ELV electrical systems for commercial building projects.</p></li><li><p>Review electrical shop drawings, method statements, technical submittals, and material approvals before execution.</p></li><li><p>Coordinate electrical works with MEP disciplines to ensure smooth project execution and resolve site clashes.</p></li><li><p>Monitor subcontractors to ensure compliance with project specifications, quality standards, and construction schedules.</p></li><li><p>Conduct site inspections and ensure all electrical installations comply with approved drawings, IEC standards, and local authority requirements.</p></li><li><p>Prepare RFIs, inspection requests, technical documentation, and project progress reports.</p></li><li><p>Coordinate with consultants, clients, and authorities to obtain approvals and resolve technical issues.</p></li><li><p>Oversee the installation of transformers, switchgear, generators, UPS, lighting, power distribution, and ELV systems.</p></li><li><p>Ensure compliance with QA/QC procedures, HSE requirements, and project specifications throughout construction activities.</p></li><li><p>Support project planning, progress monitoring, and successful project handover within budget and schedule.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Electrical Engineering.</p></li><li><p>Minimum <strong>10 years</strong> of experience in electrical engineering within the commercial construction industry, including GCC experience.</p></li><li><p>Strong experience in LV and ELV systems, including power distribution, lighting, earthing, CCTV, BMS, Access Control, and Fire Alarm systems.</p></li><li><p>Proficiency in AutoCAD, Revit MEP, and electrical design principles such as load calculations and cable sizing.</p></li><li><p>Thorough knowledge of IEC, NFPA, Gulf standards, and local authority approval requirements.</p></li><li><p>Excellent coordination, communication, and project management skills with experience in commercial and hospitality projects.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. As a Graduate Engineer Electrical, you will be responsible for overseeing various construction projects, ensuring adherence to design specifications, safety standards, and project timelines.</p><p>Manage and oversee engineering projects from inception to completion. Develop project plans, schedules, and budgets, ensuring adherence to timelines and budgetary constraints. Coordinate with project stakeholders, including clients, contractors, architects, and regulatory agencies. Conduct regular site visits to monitor progress, quality of work, and adherence to safety protocols. Address any site-related issues promptly, providing technical guidance and solutions as necessary. Ensure compliance with relevant building codes, regulations, and environmental standards. Review project designs, specifications, and drawings to ensure accuracy and feasibility. Provide input during the design phase to optimize construction processes and materials selection. Collaborate with design teams to resolve any design-related issues or modifications. Quality Assurance/Quality Control (QA/QC): Implement QA/QC procedures to ensure construction work meets established standards and specifications. Conduct inspections and tests to verify the quality of materials and workmanship. Document and report any non-conformities or deviations, and work towards timely resolution. Work closely with architects, structural engineers, and other professionals to coordinate interdisciplinary aspects of projects. Foster a collaborative and positive work environment, encouraging effective communication and teamwork. Provide mentorship and support to junior engineers and site staff as needed.</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or related field. Master's degree preferred. Professional Engineer (PE) license or eligibility for licensure. Proven experience in Electrical engineering, with a focus on site management and construction. Strong knowledge of construction methods, materials, and techniques.</p><p></p></section>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Remarkable people, trusted by clients to design and advance the world</strong></p><br><p>Wood is recruiting for a <strong>Risk-Based Inspection (RBI) Subject Matter Expert (SME)</strong> to join its Projects team focusing on delivering across Oil and Gas projects. Position is based in Oman for duration of one year.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <p>The Risk-Based Inspection (RBI) Subject Matter Expert (SME) will be responsible to support an operating refinery and petrochemical complex. The role will lead and support the transition from API RP 580 to API RP 581 within a GE-APM (Meridiam / Asset Strategy Management) environment, while also providing ongoing technical leadership for the site RBI and asset integrity program.</p><br><br> <p><strong>Designing the future. Transforming the world</strong>&nbsp;</p><br><br> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.&nbsp;<br> &nbsp;</p><br><br> <p><strong>What we can offer</strong>&nbsp;</p><br><br> <ul> <li><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;&nbsp;</li> </ul><br> <ul> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> </ul><br> <ul> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> </ul><br> <ul> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.&nbsp;</li> </ul><br> <ul> <li><strong>Workmen’s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.&nbsp;</li> </ul><br> <ul> <li><strong>Employee Assistance Programme: </strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.&nbsp;</li> </ul><br> <p><strong>Typical responsibilities</strong>&nbsp;&nbsp;</p><br><br> <p><strong>API 580 to API 581 Transition (Operating Plant Context)</strong></p><br> <p>• Lead the transition from API 580 qualitative/semi-quantitative RBI to API 581 quantitative RBI for refinery and petrochemical process units.&nbsp;</p><br> <p>• Implement and validate API 581 RBI models in GE-APM, ensuring they reflect actual operating conditions, materials of construction, and process chemistry.&nbsp;</p><br> <p>• Assess legacy RBI studies and inspection plans for migration suitability and regulatory defensibility.&nbsp;</p><br> <p>• Identify data gaps typical of brownfield assets (corrosion rates, inspection history, damage mechanisms) and define practical remediation plans.&nbsp;</p><br> <p>• Ensure assumptions, damage models, and consequences reflect plant-specific risks, including inventory, toxicity, flammability, and siting.&nbsp;</p><br> <p><strong>RBI Execution &amp; Governance&nbsp;</strong></p><br> <p>• Act as the site RBI technical authority, providing governance, review, and approval of RBI studies and updates.&nbsp;</p><br> <p>• Ensure RBI outputs support:&nbsp;</p><br> <p>&nbsp; &nbsp;o Regulatory compliance&nbsp;</p><br> <p>&nbsp; &nbsp;o Safe operating envelopes&nbsp;</p><br> <p>&nbsp; &nbsp;o Optimized inspection intervals without compromising risk&nbsp;</p><br> <p>• Support audits, regulatory reviews, and internal assurance activities related to RBI and inspection programs.&nbsp;</p><br> <p><strong>Corrosion &amp; Damage Mechanism Management&nbsp;</strong></p><br> <p>• Lead and support corrosion studies and damage mechanism reviews (DMR/DMI) for:&nbsp;</p><br> <p>&nbsp; &nbsp;o Crude, vacuum, hydrotreating, hydrocracking, RFCC, reforming, sulfur recovery, and petrochemical units&nbsp;</p><br> <p>• Validate corrosion rate development and degradation models used in RBI.&nbsp;</p><br> <p>• Interface closely with site corrosion engineers to ensure consistency between corrosion management plans and RBI assumptions.&nbsp;</p><br> <p><strong>Inspection Strategy Development (Operating Units)&nbsp;</strong></p><br> <p>• Develop and optimize risk-based inspection strategies for pressure vessels, piping, tanks, heat exchangers, and associated static equipment.&nbsp;</p><br> <p>• Ensure inspection plans account for:&nbsp;</p><br> <p>&nbsp; o Shutdown windows and turnaround planning&nbsp;</p><br> <p>&nbsp; o Online vs. offline inspection feasibility&nbsp;</p><br> <p>&nbsp; o Access, safety, and operational constraints&nbsp;</p><br> <p>• Support integration of RBI outputs into inspection execution and long-term maintenance plans.&nbsp;</p><br> <p><strong>Bad Actor Identification &amp; Continuous Improvement&nbsp;</strong></p><br> <p>• Identify and analyse bad actors across refinery and petrochemical equipment populations.&nbsp;</p><br> <p>• Investigate recurring damage, unexpected failures, and high-risk equipment trends.&nbsp;</p><br> <p>• Recommend changes to inspection effectiveness, corrosion mitigation, and operating practices where required.&nbsp;</p><br> <p>• Support site initiatives focused on reliability improvement and loss prevention.&nbsp;</p><br> <p><strong>Interface with Operations &amp; Engineering&nbsp;</strong></p><br> <p>• Work closely with Operations, Process Engineering, and Maintenance to ensure RBI reflects real operating realities.&nbsp;</p><br> <p>• Participate in management of change (MOC) reviews, assessing RBI impacts of process, feedstock, or operational changes.&nbsp;</p><br> <p>• Support turnarounds by prioritizing inspection scope based on risk.&nbsp;</p><br> <p><strong>Training &amp; Capability Development&nbsp;</strong></p><br> <p>• Deliver hands-on training and mentoring to site RBI, inspection, and corrosion engineers.&nbsp;</p><br> <p>• Develop and deliver training tailored to an operating plant environment, covering:&nbsp;</p><br> <p>&nbsp; o API RP 580 and API RP 581 application&nbsp;</p><br> <p>&nbsp; o Quantitative RBI interpretation using GE-APM&nbsp;</p><br> <p>&nbsp; o Damage mechanisms specific to refining and petrochemicals&nbsp;</p><br> <p>&nbsp; o Practical use of RBI to support turnaround and inspection planning&nbsp;</p><br> <p>• Build long-term RBI competency and consistency across the site.</p><br><br><br>Qualifications:<br> <p><strong>What makes you remarkable?&nbsp;</strong>&nbsp;</p><br><br> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><br> <p><strong>Experience:</strong></p><br> <ul> <li>BSC degree engineering in mechanical preferred</li> <li>Over 10 years of experiecne in petro-chemical industry</li> </ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are looking for a motivated and detail-oriented professional with a background in fire fighting systems engineering to join our team as a Project Engineer – Fire Fighting System. The ideal candidate will combine technical expertise with strong selling skills and the ability to confidently communicate complex solutions. You will play a key role in delivering high-quality fire protection projects while collaborating across departments and ensuring client satisfaction. If you are passionate about fire safety engineering and enjoy developing solutions in a dynamic environment, we invite you to apply. </p><br><br>Key Responsibilities – Project Engineering and Fire Fighting System Management<ul> <li>Manage the planning, execution, and delivery of fire fighting system projects from inception through to completion, ensuring adherence to relevant codes and standards.</li> <li>Liaise with clients, consultants, contractors, and internal stakeholders to establish technical requirements, address queries, and ensure alignment throughout project phases.</li> <li>Prepare and review system designs, material submittals, method statements, and as-built documentation, ensuring technical accuracy and compliance.</li> <li>Attend site meetings, carry out inspections and technical assessments, and provide clear direction to installation teams.</li> <li>Identify and resolve project challenges through effective problem solving and proactive decision making.</li> <li>Assist the sales team by providing technical support, preparing accurate project quotations, and contributing to tender submissions as required.</li> <li>Track project progress, control costs, and ensure delivery against timelines and client expectations.</li> <li>Promote a strong safety culture and adherence to best practices at all project locations.</li> </ul>Required Skills – Selling Skills, Technical Knowledge, and Communication for Fire Fighting Systems<ul> <li>Proven selling skills in a project or engineering context, with the ability to present fire protection solutions and influence stakeholders.</li> <li>Comprehensive technical knowledge of fire fighting systems, including design, installation, testing, and compliance with international and local codes (NFPA, Civil Defence, or equivalent).</li> <li>Excellent communication skills, both verbal and written, with the capability to explain complex concepts to clients and colleagues.</li> <li>Competence in reading schematics, engineering drawings, and producing technical documentation.</li> <li>Experience using relevant engineering software and standard office applications.</li> </ul>Qualifications &amp; Experience – Project Engineer for Fire Fighting Systems<ul> <li>Bachelor’s degree in Mechanical Engineering, Fire Protection Engineering, or a closely related discipline.</li> <li>Minimum 3 years' experience in project engineering or technical roles within the fire fighting, MEP, or building services industry.</li> <li>Direct experience managing installation or commissioning of fire suppression systems, sprinklers, pumps, hydrants, and associated equipment is highly desirable.</li> <li>Familiarity with local regulatory frameworks and fire safety standards is a strong advantage.</li> </ul>What We Offer – Growth Opportunities and Supportive Team Culture<ul> <li>Structured opportunities for career development and technical upskilling in fire safety engineering.</li> <li>Comprehensive induction and continuous training on state-of-the-art fire protection technologies.</li> <li>Inclusive, gender-neutral, and collaborative workplace committed to employee success and innovation.</li> <li>Involvement in prestigious and diverse fire protection engineering projects.</li> </ul> <br><br> </div>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><span >A) Senior Estimation &amp; Proposal Engineer</span></p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.<br>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop<br>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.<br>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.<br>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.<br>6) Experience in managing multiple subcontractors with high value subcontracts.<br>7) Independently manage planning and project control functions for EPC projects.<br>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.<br>9) Track progress and prepare daily, weekly, and monthly reports.<br>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>