وظائف مهندس مواد

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title </b>Sr. Engineer Turnaround Stream OQ8 Function Maintenance Department Turnaround Section Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head, Turnaround Direct reports</p><p>Job purpose:</p><p>Provides strong professional technical &amp; engineering expertise pertaining to Turnaround schedule / shutdown maintenance works, across OQ8, under TL Turnaround Execution scope s, acting as Technical Service provider of execution of turnaround under technical standards set by TSD to maintain the assets; through (1) Executing maintenance turnaround activities including shutdown works, equipment cleaning, inspection, repair, and replacement works, and Testing / commissioning, (2) Prepare the required report for the monitoring, control of the execution phase, and (3) Guide young engineers in Turnaround execution matters; in order to ensure maximum availability of plant at all times, optimizing the cost, time &amp; resource utilization, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ8 talent pipeline.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Scope (Engineer Turnaround Execution)</p><p>Turnaround Planning</p><p>Drive end to end planning of turnaround involving material and contract planning, stake holder management and coordination, resource management and optimization.</p><p>Turnaround Execution</p><p>Shutdowns or outages activities such as inspection, repair, replacement, and maintenance of equipment and facilities.</p><p>Inspection and Testing</p><p>Comprehensive inspection and testing of equipment, vessels, piping, and systems to identify any signs of damage, corrosion, leaks, or wear that need to be addressed</p><p>Maintenance and Repair</p><p>Repair or replacement of damaged or malfunctioning equipment, including pumps, compressors, turbines, heat exchangers, reactors, distillation columns, and other process units. This may involve activities such as welding, mechanical repairs, or reconditioning.</p><p>Cleaning and Decontamination</p><p>Cleaning of process equipment and systems to remove contaminants, deposits, and hazardous substances. This ensures optimal performance and minimizes the risk of operational issues.</p><p>Catalyst Replacement</p><p>Refineries often use catalysts in various processes. Turnarounds provide an opportunity to replace spent or deactivated catalysts with fresh ones to maintain efficiency and product quality.</p><p>Facility Upgrades</p><p>Implementation of modifications or upgrades to improve safety, reliability, efficiency, or compliance with environmental regulations.</p><p>Installing new equipment, upgrading control systems, or integrating new technologies.</p><p>Piping and Insulation</p><p>Inspection and repair of piping networks, valves, and fittings, as well as the replacement or repair of insulation to prevent heat loss or maintain proper temperature control.</p><p>Safety Measures</p><p>Implementation of strict safety protocols, including the training of personnel, adherence to permit-to-work systems, and the implementation of safety barriers to mitigate risks during the turnaround.</p><p>Environmental Compliance</p><p>Compliance with environmental regulations, such as the proper handling and disposal of hazardous materials, emissions monitoring, and implementation of pollution control measures.</p><p>Accountabilities:</p><p>Developing a turnaround plan for the execution</p><p>Works with the Turnaround Planning team to develop a comprehensive and integrated plan for the turnaround.</p><p>Identifying the scope of work, estimating the resources required, and developing a timeline for the execution of the work.</p><p>Procuring resources</p><p>Execute works with the procurement team to ensure that all the necessary resources, including materials, equipment, and personnel, are available for the turnaround.</p><p>Develop and review Scope of Works, prepare &amp; evaluate tender bid and prepare recommendations reports.</p><p>Managing the execution of work</p><p>Lead the execution of works, ensuring is conducted safely, efficiently, and in compliance with regulations.</p><p>Ensuring equipment manufacturers standards, procedures and safety regulations are followed by staff and contractors.</p><p>Develops work breakdown structures and recommends appropriate modifications and revisions for new work items assigned.</p><p>Establishes best maintenance practices &amp; systems to optimize resources and enhance turnaround / shutdown scheduled maintenance.</p><p>Proactively resolves issues during all phases of the schedule turnaround (including scope development &amp; start up to completion of turnaround activities).</p><p>Archives baseline and final schedules ensuring best practice for improvement is applied to turnaround schedule activities.</p><p>Conduct TA close out review and finalize close out report and conduct lessons learned workshop.</p><p>Coordinating with stakeholders</p><p>Works with a range of stakeholders, including maintenance teams, contractors, and operations personnel, to ensure that the turnaround is executed smoothly.</p><p>Monitoring progress</p><p>Monitoring the progress of the turnaround and providing regular updates to management.</p><p>Conduct meeting, prepare summary reports and provide daily update on the execution of the scheduled turnaround /shutdown maintenance.</p><p>Managing safety</p><p>Ensuring that all work is conducted in compliance with safety regulations and procedures.</p><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Engineering, Technology, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Engineering (Mechanical, Electrical, Instrumentation) or related field.</li><li>Black Belt Certification, preferred</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Minimum 8 years of relevant experience within the Oil &amp; Gas / Refinery / Petrochemical industry, in a similar role.</li><li>Knowledge of: Computerized Maintenance Management Systems (CMMS), Expertise in SAP- PM Module., Primavera / MS Project</li><li>Hands on experience in turnround execution by executing multiple turnarounds involving complete process units.</li><li>Experience handling of maintenance contracts and procurement.</li><li>Experience in planning, scheduling of turnaround &amp; shutdown related jobs.</li><li>Familiar with material and international engineering applicable codes.</li><li>Coordinating projects and strategic initiatives from planning through execution and performance tracking.</li><li>Soft: Excellent interpersonal skills with strong customer service orientation. Demonstrated ability to direct, align, motivate, and develop planning staff. High level skills of planning &amp; organizing. Ability to delegate tasks and resources. Ability to manage multiple priorities in a diversified and critical environment. Possess analytical thinking in data analysis. Ability to pay attention to details. Ability to prioritize Turnaround maintenance activities. Flexibility to work on multiple planning task simultaneously. Ability to coordinate and influence peers.</li><li>Technical: Proficiency in M/S Office. Computerized Maintenance Management System (CMMS). Planning &amp; scheduling software. Ability to plan major shutdown projects. Well versed in maintenance &amp; technical specifications.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office.<br> Position is based in Musandam, Oman for a long-term assignment.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p>Renardet S.A. &amp; Partners is multidisciplinary company that provides consultancy services for design, construction supervision, technical assistance and project management for infrastructural, architectural and industrial fields of work. The company has executed more than 1500 compound projects in domain of infrastructure, hydrology, structures and dams, as well as low-rise and high-rise buildings (architecture), thanks to our international experts and their expertise.</p><p>The Opportunity:</p><p>Resident Engineer (for Site Supervision Road Project)</p><p>In order to provide a quality and satisfactory service to our clients, we are looking for experts that apart from having excellent knowledge and experience in their field, also possess personal traits such as flexibility in their work environment, team work attribute as well as leadership spirit.</p><p>For a number of projects that will commence in the following months, Renardet S.A. &amp; Partners is looking to hire on a call of contract basis.</p><h2>Job Description:</h2><ul><li>Proven leadership, decision-making, and team management skills are necessary for supervising a multidisciplinary team of engineers, geologists, and inspectors.</li><li>Overseeing all construction activities for dam components, ensuring compliance with designs, specifications, and safety standards.</li><li>Provides technical guidance, resolve site specific problems, and review work plans, method statements, and materials submissions.</li><li>Manage a team of engineers and staff, coordinate with the contractors, and ensure work is completed efficiently.</li><li>Monitors project progress, assess risks, prepare a detailed progress reports, and review contractual issues like claims and variations.</li><li>acts as main point of contact with the Client, contractors, and regulatory bodies.</li><li>ensuring construction activities adhere to the project's budget and timeline.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements:</h2><ul><li>Bachelor s degree in science in Civil Engineering;</li><li>Minimum of 15 years of experience in the construction supervision of roads and bridges.</li><li>Out of these 15 years, at least 8 years shall have been served in the capacity of Resident Engineer.</li><li>Must have at least 5 years experience in the middle east.</li><li>Proficiency in English language (spoken and written).</li></ul><p>Your CV in English language shall be sent exclusively electronically.</p><p>The shortlisted candidates will be contacted for the selection process</p>

<p><strong>About Us</strong></p><p>Specialized Import and Trading LLC is a leading company in the import and supply of building materials across the Sultanate of Oman. We specialize in supplying high-grade materials to construction companies, developers, and project contractors. We take pride in delivering dependable products, competitive sourcing, and exceptional service to our clients.</p><p><strong>Role Overview</strong></p><p>We are seeking a proactive and driven Sales &amp; Marketing Representative to join our team in Muscat. In this role, you will focus on building relationships with construction companies, identifying new project opportunities, presenting our product range, and closing sales deals to expand our presence in the Omani market.</p><p><strong>Key Responsibilities</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Sales Strategy &amp; Execution: </strong>Develop and execute effective sales strategies to achieve monthly and annual revenue targets.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Client Relationship Building: </strong>Establish, maintain, and strengthen long-term relationships with construction companies, contractors, and project managers.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Business Development: </strong>Actively prospect for new clients, track upcoming construction projects, and pursue fresh commercial opportunities across Oman.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Client Service &amp; Support: </strong>Deliver high-quality customer service, handle client inquiries, coordinate orders, and provide appropriate technical/product support.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Presentations &amp; Proposals: </strong>Prepare and deliver clear sales presentations, product quotations, and commercial proposals.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Negotiation &amp; Closing: </strong>Lead price negotiations, finalize terms, and close sales contracts in line with company policies.</p>

<p><br></p><p>Below are the open positions:</p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Mechanical Engineering.</li><li>8+ years of experience in Estimation &amp; Proposal writing</li><li>Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</li><li>Strong knowledge of international codes and standards</li><li>Familiarity with local construction codes and regulations.</li><li>Working knowledge of PDO, OQ, and Oxy specifications.</li><li>Experience in contract processing and contract management.</li><li>GCC / Oman experience is a must</li></ul>

<p><br></p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance. Interested candidates Please email your CV on EMAIL_ADDRESS</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance.</p><p></p></section>

<p><br></p><p>- A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>- B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>- C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>- D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>- E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>- F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>- G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>- H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Bachelor of Technology/Engineering(Civil), Master of Technology/Engineering(Civil)</p><br><br><ul><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p></li><li><p><strong>OMAN experience is Must.</strong></p></li><li><p><strong>MINISTRY Experience is preferred.</strong></p></li><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p>Desired Candidate Profile</p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p><br></li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Building Construction project only </p></li><li><p>OMAN experience is Must.</p></li><li><p>MINISTRY Experience is preferred.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Preparation of MEP Drawings Create detailed Mechanical, Electrical, and Plumbing drawings using CAD/BIM software (e.g., AutoCAD, Revit). Develop shop drawings, installation drawings, and as-built drawings. Coordination of MEP Services Coordinate MEP layouts with architectural and structural drawings. Identify and resolve clashes between different building services. Review of Design Documents Interpret engineering specifications, design calculations, and project requirements. Ensure drawings comply with project standards and client requirements. Revision and Documentation Update drawings based on engineer comments and site changes. Maintain drawing revisions and document control procedures. Preparation of Shop Drawings Produce detailed fabrication and installation drawings for HVAC, electrical, plumbing, and firefighting systems. Include dimensions, elevations, sections, and installation details. Quantity Take-Off Assist in preparing material quantity take-offs from drawings. Support estimation and procurement teams with accurate drawing information. BIM Modeling (if applicable) Create and maintain 3D MEP models using BIM software. Participate in clash detection and coordination meetings. Compliance with Standards Ensure drawings comply with local building codes, industry standards and company drafting procedures. Follow applicable safety and quality requirements. Site Support Provide revised drawings based on site conditions. Assist engineers and site teams by clarifying drawing details. Record Keeping Organize drawing files and maintain project documentation. Ensure all issued drawings are properly archived and traceable.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Required Skills Proficiency in AutoCAD and Revit MEP. Knowledge of HVAC, electrical, plumbing, and fire protection systems. Understanding of engineering drawings, symbols, and standards. Familiarity with BIM coordination and clash detection. Strong attention to detail and accuracy. Good communication and teamwork skills. Ability to manage multiple projects and meet deadlines. Educational Qualifications Diploma or Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil Engineering, or a related technical field. Certification in AutoCAD, Revit MEP, or BIM is an added advantage</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Graduate Electrical Engineer or I&amp;amp;C with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Electrical, Instrumentation<br><br>&amp;amp; Control, process equipment installations, controls system upgrade, PLC/SCADA,<br><br>Cable installation, MCC, VFD, Switch gear installation and related scope of work.<br><br>Estimation of Saudi Aramco, SABIC projects shall be added advantage.<br><br>Graduate Mechanical Engineer with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Oil &amp;amp; gas pipeline<br><br>installation, process equipment installations, Tanks, structure installation and related<br><br>scope of work. Estimation of Saudi Aramco, SABIC projects shall be added<br><br>advantage<br><br></span><br><span>RequirementsEstimation Engineer (Mechanical)<br><br>Estimation Engineer (Electrical/I&amp;C)<br><br></span><br> </div>

<p><h4>Job description</h4> <p>The warehouse specialist assists the supply supervisor in the performance of routine warehousing duties. Assists in training of material storage and distribution/warehouse personnel. Receives, stores and issues supplies and equipment. Maintains warehouse locations, selects supplies and equipment for issues and shipments. Manages the shelf-life program. Carries out housekeeping duties in the warehouse. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Ensures all receipts of supplies and equipment from deposits and other sources of supply are identified properly and are in a serviceable condition before storing.</li> <li>Performs warehouse validations and prepares the warehouse for inventories.</li> <li>Receive, inspect and store materials in designated warehouse locations.</li> <li>Operate material handling equipment such as forklifts and pallet jacks.</li> <li>Prepare and issue materials for operational use or deployment.</li> <li>Conduct routine inventories to maintain accurate warehouse records.</li> <li>Ensure compliance with safety and security standards for storage.</li> <li>Maintain a clean and organized warehouse environment.</li> <li>Support audits and inspections by providing accurate records and inventory data.</li> <li>Performs other duties as directed or assigned by the supervisor.</li> <li>Be responsible for HAZMAT and environmental functions.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment up to 10k forklift.</li> <li>High school diploma or equivalent required.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Working knowledge in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs is preferred.</li> <li>Proficiency in warehouse operations and inventory management systems preferred.</li> <li>One to two years' experience in a supply system or closely related function is preferred.</li> <li>Maximo experience is preferred.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are looking for a motivated and detail-oriented professional with a background in fire fighting systems engineering to join our team as a Project Engineer – Fire Fighting System. The ideal candidate will combine technical expertise with strong selling skills and the ability to confidently communicate complex solutions. You will play a key role in delivering high-quality fire protection projects while collaborating across departments and ensuring client satisfaction. If you are passionate about fire safety engineering and enjoy developing solutions in a dynamic environment, we invite you to apply. </p><br><br>Key Responsibilities – Project Engineering and Fire Fighting System Management<ul> <li>Manage the planning, execution, and delivery of fire fighting system projects from inception through to completion, ensuring adherence to relevant codes and standards.</li> <li>Liaise with clients, consultants, contractors, and internal stakeholders to establish technical requirements, address queries, and ensure alignment throughout project phases.</li> <li>Prepare and review system designs, material submittals, method statements, and as-built documentation, ensuring technical accuracy and compliance.</li> <li>Attend site meetings, carry out inspections and technical assessments, and provide clear direction to installation teams.</li> <li>Identify and resolve project challenges through effective problem solving and proactive decision making.</li> <li>Assist the sales team by providing technical support, preparing accurate project quotations, and contributing to tender submissions as required.</li> <li>Track project progress, control costs, and ensure delivery against timelines and client expectations.</li> <li>Promote a strong safety culture and adherence to best practices at all project locations.</li> </ul>Required Skills – Selling Skills, Technical Knowledge, and Communication for Fire Fighting Systems<ul> <li>Proven selling skills in a project or engineering context, with the ability to present fire protection solutions and influence stakeholders.</li> <li>Comprehensive technical knowledge of fire fighting systems, including design, installation, testing, and compliance with international and local codes (NFPA, Civil Defence, or equivalent).</li> <li>Excellent communication skills, both verbal and written, with the capability to explain complex concepts to clients and colleagues.</li> <li>Competence in reading schematics, engineering drawings, and producing technical documentation.</li> <li>Experience using relevant engineering software and standard office applications.</li> </ul>Qualifications &amp; Experience – Project Engineer for Fire Fighting Systems<ul> <li>Bachelor’s degree in Mechanical Engineering, Fire Protection Engineering, or a closely related discipline.</li> <li>Minimum 3 years' experience in project engineering or technical roles within the fire fighting, MEP, or building services industry.</li> <li>Direct experience managing installation or commissioning of fire suppression systems, sprinklers, pumps, hydrants, and associated equipment is highly desirable.</li> <li>Familiarity with local regulatory frameworks and fire safety standards is a strong advantage.</li> </ul>What We Offer – Growth Opportunities and Supportive Team Culture<ul> <li>Structured opportunities for career development and technical upskilling in fire safety engineering.</li> <li>Comprehensive induction and continuous training on state-of-the-art fire protection technologies.</li> <li>Inclusive, gender-neutral, and collaborative workplace committed to employee success and innovation.</li> <li>Involvement in prestigious and diverse fire protection engineering projects.</li> </ul> <br><br> </div>

<p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations. Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations. Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications. Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements. Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues. Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters. Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements. Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage. Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices. Engineer Operation Support: Execute assigned engineering and operational support tasks under supervision. Apply approved engineering procedures, standards, and work practices during execution and operations. Support commissioning, start up, and operational activities as part of a multi disciplinary team. Contribute to studies, reviews, and troubleshooting activities under guidance. Senior Engineer Operation Support: Independently handle multiple operational support and execution scopes across on plot and off plot facilities. Provide technical guidance and mentoring to junior engineers and trainees. Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment. Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs). Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives. Manage technical aspects of procurement, bid evaluation, and vendor document reviews. Lead Engineer Operation Support: Act as technical authority for operational support across on plot and off plot upstream facilities. Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams. Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases. Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance. Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders. Support capability development, succession planning, and continuous improvement within Operation Support. Key interactions Internal: Operated Assets functions. External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education requirements:</h2><p>Bachelors in Process, Chemical, or equivalent</p><h2>Language requirements :</h2><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><h2>Background and experience:</h2><p>Background 5+ years of relevant experience Adaptable and motivated engineering professional who thrives in complex operational and project environments. Experience in engineering design support and troubleshooting within upstream surface facilities. Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support. Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes. Working knowledge of Quality Assurance, Quality Control, and HSE requirements. Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h2>Competencies and skills:</h2><h3>Soft Skills</h3><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity. Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration. Ability to manage multiple priorities in a dynamic, time critical operational environment. Analytical and fact based approach to problem solving and decision making. Strong troubleshooting mindset and result oriented attitude.</p><h3>Technical Skills</h3><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office). Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines. Knowledge of resource coordination, interface management, and basic contract administration. Experience in Root Cause Analysis (RCA) and structured problem solving techniques. Ability to read and interpret engineering drawings, specifications, and vendor documentation. Basic understanding of project execution and project management principles. Ability to support the development, review, and modification of technical and operational procedures. Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Renewable Energy Technician, you will support the production of wind turbine blades and the mechanical and electrical assembly of nacelle and hub systems. This entry-level role provides hands-on experience in composite manufacturing, structural assembly, mechanical integration, electrical installation, process control, and quality-controlled production processes.</p> <p>Trainees will work under the supervision of engineers, trainers, and senior technicians to ensure that all production activities meet strict quality, safety, documentation, and performance standards. The program is designed to develop practical manufacturing competencies required for future employment in wind turbine component production.</p> <p><strong>Key Responsibilities and Training Scope: br&gt;</strong></p> <p><strong>Blade Manufacturing and Composite Production</strong></p> <ul> <li>Participate in theoretical and practical training on wind turbine blade structure, factory rules and discipline, attendance and working time management, cutting room processes, raw materials, molds, supporting equipment, and workplace safety.</li> <li>Assist in mold preparation, material cutting and kitting, fabric layup, overlap control, core material protection, root prefabrication, precast component production, spar cap/main beam preparation, shell production, and related fixture operations.</li> <li>Handle fiberglass, carbon fiber, resins, bonding agents, core materials, auxiliary materials, and consumables in accordance with work instructions, safety requirements, and production procedures.</li> <li>Support resin infusion, vacuum preparation, infusion layout, valve operation, curing profile control, blanket covering, hardness/TG checks, debagging, demolding, and auxiliary material removal.</li> <li>Support web bonding and shell bonding activities, including bonding surface preparation, glue mixing, paste application, gantry and lifting fixture positioning, dry-fit checks, bonding gap adjustment, perimeter vacuum control, mold closing, and inner reinforcement layup.</li> <li>Perform trimming, root surface trimming, and root milling support, sanding, grinding, putty application, surface finishing, touch-up, coating, painting, leading-edge protection, add-ons installation, marking, and delivery/shipping preparation.</li> <li>Support blade weighing, weight-balance calculation, balance correction, production record preparation, certificate of conformity inspection support, and final production documentation.</li> <li>Identify defects, support repair activities, follow NCR and repair processes, and participate in defect improvement and root-cause corrective action activities under supervision.</li> </ul> <p><strong>Nacelle and Hub Assembly</strong></p> <ul> <li>Support the assembly of nacelle structures and hub-related mechanical systems in accordance with engineering documentation, standard operating procedures, and production plans.</li> <li>Assist in the installation and integration of major nacelle components, including gearbox, generator, main shaft, yaw system, cooling systems, hydraulic systems, and related structural and mechanical parts.</li> <li>Install mechanical components, electrical cabling, hydraulic lines, and auxiliary systems while following approved work instructions and safety requirements.</li> <li>Use torque tools, measuring instruments, and precision assembly equipment to meet specified tolerances and assembly requirements.</li> <li>Assist in alignment checks, functional testing, pre-dispatch inspections, and readiness checks before delivery or handover.</li> <li>Maintain production records and follow standardized work procedures, quality checklists, and engineering documentation.</li> </ul> <p><strong>Quality Assurance, Safety, Process, and Maintenance Exposure</strong></p> <ul> <li>Receive basic quality and inspection training, including the use of measuring instruments, quality checklists, production records, and inspection documentation.</li> <li>Support raw material inspection for main and auxiliary materials, visual inspections, dimensional checks, process checks, defect criteria learning, and onsite quality-control activities.</li> <li>Learn quality control points for component production, shell layup, infusion and curing, debagging, web bonding, shell bonding, finishing, paint inspection, UT scan support, and certificate of conformity documentation.</li> <li>Follow PPE requirements, safety education, job safety analysis requirements, workplace hazard identification, daily safety inspection</li> <li>Understand production compliance with SOPs, drawing review, production daily reporting, defect repair follow-up, root-cause corrective action, and continuous improvement activities.</li> <li>Gain exposure to operation and basic maintenance of production equipment such as vacuum pumps, infusion machines, paste/glue machines, gantries, rotation equipment, root milling machines, molds, and related facilities.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Higher Diploma in Mechanical Engineering, Electrical Engineering, or Chemical Engineering or related field.</strong></p> <ul> <li>Recent graduate or up to three (3) years of internship or work experience in manufacturing or industrial environments.</li> <li>Must be under thirty-five (35) years of age.</li> <li>Candidates must not have previously benefited from any government or private initiative.</li> <li>Candidates must be registered as a job seeker or must have resigned from their previous employment for at least three (3) months.</li> <li>Fluency in English, with good documentation, reporting, and communication skills.</li> <li>Willingness and ability to participate in full-time training, possible shift work, and international deployment to China where required.</li> </ul><p></p></section>

<p><strong>Job Summary:</strong> Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience Product Engineer supports the Sales and Operations goals by providing technical support as requested to enable the segment to plan, design, execute and evaluate SLB products and services we provide to our Clients. A principal role of the Product Engineer is to ensure that our products are competitive and reliable in the market and that we understand the performance expectations and make up of that market. The Product Engineer should have the capability to design bit based on the inputs of the formation evaluation /offset wells/ Temp profile/UCS /geomechanics and other main inputs . The role is responsible for communicating the technical differentiation of our various drilling products and services over those of the competition in the field. The Product Engineer understands both the technology and its value and is a technical bridge between the client organization and the segment. The Product Engineer is the enabler and driver of new technology opportunities through solution-driven client and engineering engagement. The Product Engineer should provide flawless Service Quality and ensure compliance with all SLB Standards.</p><p><strong>Essential Responsibilities and Duties:</strong></p><p><strong>Technical Sales Support:</strong> Provides technical support to the sales organization and to clients. Assist with Engineering prototype applications and New Technology (NT) market introductions Drive New Technology (NT) sales and provides technical sales support for opportunities identified by front line sales team in the location. Perform internal and external marketing activities such as technology presentations, lunch and learns, workshops, and technology launches. Develop appropriate relationships with key senior technical personnel within the client s organization by becoming a Technical Reference/Advisor.</p><p><strong>Application Analysis and Sales Development:</strong> Analyze, benchmarks and evaluates product performance to ensure a competitive position is maintained and initiates new or modified design requests to meet the operational goals of the geography Assist with field based Applications Analysis (modeling &amp; simulation) to enable Operations to effectively sell our Products and Services with a differentiable advantage. Deliver Real-Time parameter monitoring as required to support execution.</p><p><strong>Technical Leadership:</strong> Create Technical Papers, Case Studies and capture Lessons Learned into InTouch based on the experiences of the GeoMarket or location. Be active in Technical Society through publishing of technical papers, participating in SLB Symposia, participating in Industry events. Contribute to the competency development of the Engineering Support group while mentoring and coaching less experienced engineers in the location.</p><p><strong>Q&amp;HSE:</strong> Investigate unusual or unsatisfactory product performance to rapidly determine root cause and preventative action. Participate in internal product quality reviews with Reliability, Engineering and Sustaining. Communicate PQ Root Cause Analysis and preventative action outcomes to customers as requested by Sales. Conduct audits and inspections as requested or scheduled. Complies with all Company &amp; Regulatory HS&amp;E &amp; Quality and IT standards and policies. Wears all Personal Protective Equipment (PPE) as required &amp; maintains required HS&amp;E &amp; SQ certifications up-to-date.</p><p><strong>Formal Job Training Covering the below Topics:</strong></p><ul><li>Technical Job Design &amp; execution for retrievable and directional casing drilling</li><li>Technical Job Design &amp; execution or non-directional casing drilling</li><li>Turbodrilling technical job design and execution for hard drilling rocks</li><li>Technical Bore Hole Enlargement for Job designing and troubleshooting</li><li>Technical Bore Hole Enlargement for operation and execution</li><li>Cross Training sales for Fishing and Remedial tools</li><li>Cross training sales for Wellbore departure and whipstocks tools</li><li>Cross Training sales for impact jars and shock subs</li><li>Cross Training sales for Bore hole enlargement</li><li>Drilling Bits</li><li>Product development and Advanced Drilling Engineering</li></ul><p><strong>Behavior:</strong></p><ul><li>Relationship builder Internally and with Clients</li><li>Strong verbal and written communicator</li><li>Team player</li><li>Innovative</li><li>Objective</li><li>Leader</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience</p>

<p>We have openings for our prestigious client in Oman; they have openings for "MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!!</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC.</p><p>2) GCC EXP IS PREFERRED</p><p>Below are the open positions:</p><ul><li>1) MEP Engineer.</li><ul><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>2) Plumbing Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>3) HVAC Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>4) Electrical Supervisor.</li><ul><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>The programme includes the development of a state-of-the-art port facility with the capacity to process millions of tonnes of bulk cargo annually, incorporating marine infrastructure, landside logistics, transportation links, utilities, and operational facilities. Scheduled for completion later this decade, the project represents one of the region's most significant port and industrial infrastructure investments.</span></p><br><p><span>This is a unique opportunity to contribute to a complex, large-scale development that will play a pivotal role in supporting economic diversification, industrial growth, and global supply chain connectivity. Candidates will have the chance to work alongside multidisciplinary teams in a dynamic environment, helping to shape a strategic piece of infrastructure with long-term regional impact.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><ul><li><span>Supervise the construction of jetties, berths, revetments, piling, and associated marine structures.</span></li><li><span>Ensure full compliance with contract requirements, technical specifications and approved design.</span></li><li><span>Maintain full-time site presence, driving safe, high-quality and on-schedule delivery.</span></li><li><span>Monitor materials and workmanship, including testing of concrete, reinforcement and structural elements.</span></li><li><span>Inspect formwork, reinforcement, and structural steel, ensuring alignment, levels and installation accuracy.</span></li><li><span>Review contractor inspection requests, approve works or raise non-conformance reports where required.</span></li><li><span>Verify precast elements meet design and quality standards.</span></li><li><span>Ensure structural tolerances are achieved across substructure and superstructure works.</span></li><li><span>Coordinate with multidisciplinary teams to ensure integration of civil provisions.</span></li><li><span>Support defect resolution during the liability period.</span></li><li><span>Works collaboratively towards the common goal of net zero carbon transition and share responsibility for the proactive identification and management of the associated carbon emissions and reductions during the delivery of work.</span></li></ul><p><span><strong>You’ll need to have:</strong></span></p><br><ul><li><span>Registered Civil Engineer with a degree in Civil Engineering (or equivalent).</span></li><li><span>15+ years’ experience, including 6+ years in port and marine construction.</span></li><li><span>Proven experience on at least two breakwater projects in a similar capacity.</span></li><li><span>Strong site supervision and quality assurance capability in marine works.</span></li><li><span>Proven consultancy background.</span></li><li><span>Effective communicator with analytical capability and ability to engage, influence and build trusted stakeholder relationships.</span></li></ul><p><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well: </strong>We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise: </strong>We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing: </strong>We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><br><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span></p><br> </div>

<p><h4>Job description</h4> <p>The warehouse specialist assists the supply supervisor in the performance of routine warehousing duties. Assists in training of material storage and distribution/warehouse personnel. Receives, stores and issues supplies and equipment. Maintains warehouse locations, selects supplies and equipment for issues and shipments. Manages the shelf-life program. Carries out housekeeping duties in the warehouse. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Ensures all receipts of supplies and equipment from deposits and other sources of supply are identified properly and are in a serviceable condition before storing.</li> <li>Performs warehouse validations and prepares the warehouse for inventories.</li> <li>Receives, inspects and stores materials in designated warehouse locations.</li> <li>Operates material handling equipment such as forklifts and pallet jacks.</li> <li>Prepares and issues materials for operational use or deployment.</li> <li>Conducts routine inventories to maintain accurate warehouse records.</li> <li>Ensures compliance with safety and security standards for storage.</li> <li>Maintains a clean and organized warehouse environment.</li> <li>Supports audits and inspections by providing accurate records and inventory data.</li> <li>Performs other duties as directed or assigned by the supervisor.</li> <li>Is responsible for HAZMAT and environmental functions.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment up to 10k forklift.</li> <li>High school diploma or equivalent required.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Working knowledge in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs is preferred.</li> <li>Proficiency in warehouse operations and inventory management systems preferred.</li> <li>One to two years' experience in a supply system or closely related function is preferred.</li> <li>Maximo experience is preferred.</li> </ul></p><p></p>