وظائف مهندس الكترونيات في سلطنة عمان

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Pre-Commissioning and Commissioning Electrical Supervisor to supervise and execute electrical pre-commissioning and commissioning activities on a major industrial energy development project. The role is focused on field-level supervision, ensuring safe execution of electrical testing, energization, and system handover in accordance with approved procedures, schedules, and HSE requirements.</p> <p>The successful candidate will work under the direction of the Electrical Superintendent and Engineers, overseeing technicians and contractors while coordinating closely with construction and commissioning teams.</p> <h4>Key responsibilities</h4> <h4>Pre-commissioning supervision</h4> <ul> <li>Supervise day-to-day electrical pre-commissioning activities in accordance with approved procedures and work packs.</li> <li>Verify construction completion and readiness for pre-commissioning through site walkdowns and inspections.</li> <li>Oversee execution of cable meggering, continuity checks, earthing inspections, and visual inspections.</li> <li>Ensure electrical installations are compliant with drawings, specifications, and applicable standards prior to commissioning.</li> <li>Identify, record, and report punch list items and construction deficiencies.</li> </ul> <h4>Commissioning & testing</h4> <ul> <li>Supervise commissioning and functional testing of LV and HV electrical systems as per commissioning plans.</li> <li>Support controlled energization activities under approved permit-to-work and isolation procedures.</li> <li>Oversee testing of motors, transformers, switchgear, MCCs, UPS systems, and emergency power systems.</li> <li>Ensure test results are correctly recorded and submitted in commissioning documentation.</li> <li>Support troubleshooting of electrical issues during commissioning and initial start-up.</li> </ul> <h4>Safety & HSE compliance</h4> <ul> <li>Enforce strict compliance with project HSE requirements, electrical safety rules, and energization controls.</li> <li>Supervise safe implementation of (LOTO) and electrical isolation procedures.</li> <li>Conduct toolbox talks and on-the-job safety briefings for electrical crews.</li> <li>Immediately report unsafe conditions, incidents, or near misses to commissioning management.</li> </ul> <h4>Workforce & contractor supervision</h4> <ul> <li>Supervise electrical technicians, craftsmen, and subcontractor personnel during commissioning activities.</li> <li>Ensure manpower, tools, and test equipment are available and fit for purpose.</li> <li>Monitor work quality and productivity, ensuring tasks are completed safely and efficiently.</li> <li>Coordinate daily work priorities with Engineers and Superintendents.</li> </ul> <h4>Coordination & interfaces</h4> <ul> <li>Coordinate activities with construction teams to ensure timely handover of systems.</li> <li>Interface with instrumentation, mechanical, and operations teams for integrated commissioning activities.</li> <li>Support vendor representatives during specialist commissioning, SATs, and troubleshooting.</li> <li>Communicate progress, constraints, and technical issues to senior commissioning personnel.</li> </ul> <h4>Documentation & reporting</h4> <ul> <li>Ensure completion and accuracy of pre-commissioning and commissioning check sheets and test records.</li> <li>Assist in compilation of completion dossiers and handover packages.</li> <li>Support punch list tracking and clearance to meet commissioning and handover milestones.</li> <li>Provide daily updates on work progress and issues to the commissioning team.</li> </ul> <h4>Systems covered</h4> <ul> <li>LV and HV switchgear</li> <li>Transformers</li> <li>Motors and MCC panels</li> <li>Variable frequency drives (VFDs)</li> <li>UPS and DC systems</li> <li>Emergency generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <h4>Qualifications & experience</h4> <h4>Education</h4> <ul> <li>Diploma or technical certificate in electrical engineering or equivalent.</li> <li>Trade background with strong commissioning experience will also be considered.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 8–12 years of experience in electrical works on large industrial or energy projects.</li> <li>Proven hands-on supervisory experience in pre-commissioning and commissioning activities.</li> <li>Experience in LNG, oil & gas, petrochemical, or power projects is preferred.</li> <li>Familiarity with international electrical standards (IEC, IEEE, NFPA).</li> </ul> <h4>Skills & competencies</h4> <ul> <li>Strong practical and supervisory skills in electrical commissioning activities.</li> <li>Solid understanding of electrical safety and energization procedures.</li> <li>Ability to read and interpret electrical drawings and single line diagrams.</li> <li>Good troubleshooting and problem-solving capabilities.</li> <li>Effective communication skills in a multicultural site environment.</li> <li>Basic computer skills for reporting and documentation.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role in a heavy industrial construction environment.</li> <li>May involve shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging site and climatic conditions.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Control &amp; Automation Designer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. Position is based in Muscat, Oman. This role will be developing C&amp;A design drawings and documents and provide expertise in drawing systems.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p><br><p><strong>What we can offer</strong></p><br><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li><li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance:&nbsp;Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li><li>Workmen’s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li><li>Employee Assistance Programme:&nbsp;Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p><strong>Responsibilities</strong></p><br><ul><li>Works closely with discipline project engineers/designers and other discipline engineers in the delivery of project engineering/construction deliverables, quality control drawings and overall project support.</li><li>Follow/ensure Quality Management System Requirements are met in line with ISO 9001-2015 and API Q2 2nd edition requirements.</li><li>Develop designs in PDMS and (new) drawings in electronic format (AutoCAD).</li><li>Implement hand marked-up changes to drawings.</li><li>Maintain standard drawing templates.</li><li>Provides quality assurance reviews and detailed checking support.</li><li>Maintain and monitor drawing development progress.</li><li>Meet project commitments and deliver to schedule.</li><li>Identify &amp; implement process improvement to reduce cycle time &amp; cost.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Experience</strong></p><br><ul><li>Minimum ITI or equivalent</li><li>Minimum 3 years in FEED/Engineering Experience and 6 years experience in the oil and gas industry with experience on major capital projects</li><li>Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) and AutoCAD.</li><li>Technical knowledge of advanced 3D design applications and processes.</li><li>Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)</li><li>Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines, specifically any API, CENELEC, IEC, IEC IP, IEEE, NEC, and NEMA standards.</li><li>Knowledgeable with designing industry related electrical and instrumentation deliverables (skids, equipment general arrangements, isometrics, plans, area classification drawings, single-lines, cable block diagrams, schematics, interconnect wiring diagrams)</li><li>Familiar with Electrical &amp; Instrumentation Data Handling Software, such as INTools, PowerGen, and any Programmable Logic Control or Digital Control System Software.</li><li>Is proficient in the use of human factors engineering guidelines and HSE best practices</li><li>Ability to work effectively in a team environment or independently with little guidance or supervision is required.</li><li>Knowledgeable of the interface points between design disciplines.</li><li>Is able to use Microsoft Word, Excel, Access, and PowerPoint.</li><li>Strong interpersonal and communications skills are highly desirable.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The Technical Maintenance Officer is responsible for supporting preventive and corrective maintenance activities to ensure the proper functioning of equipment, machinery, and facility systems. The role involves assisting in troubleshooting, repairs, inspections, and maintaining operational efficiency.</p><p>Key Responsibilities</p><ul><li>Perform routine maintenance and inspection of equipment and facility systems.</li><li>Assist in troubleshooting mechanical and electrical faults.</li><li>Carry out preventive maintenance tasks as per schedule.</li><li>Support repair and replacement of faulty components.</li><li>Ensure equipment is operating safely and efficiently.</li><li>Report technical issues and maintenance requirements to supervisors.</li><li>Maintain maintenance logs and service records.</li><li>Follow safety procedures and use PPE at all times.</li><li>Assist senior technicians and engineers in maintenance activities.</li><li>Ensure tools and equipment are properly used and maintained.</li></ul><p>Working Conditions</p><ul><li>Site-based and technical work environment.</li><li>May involve physical work and field operations.</li><li>Standard working hours with possible shift work depending on operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Job Details</h2><p>Number of Vacancies: 41 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><h2>Qualifications</h2><h3>Diploma only in Mechanical Engineering, Electrical Engineering, or a related technical field.</h3><h3>Experience</h3><p>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</p><h3>Technical Skills</h3><ul><li>Basic understanding of mechanical or electrical systems.</li><li>Ability to use basic tools and maintenance equipment.</li><li>Knowledge of safety procedures in technical environments.</li><li>Basic ability to read technical manuals and instructions.</li><li>Basic knowledge of Microsoft Office (Word, Excel).</li></ul><h3>Soft Skills</h3><ul><li>Strong problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Ability to work in a team environment.</li><li>Willingness to learn and develop technical skills.</li><li>Good communication and reporting skills.</li><li>Ability to work in field and operational environments.</li></ul><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Technician System Control Stream OQ8 Function Maintenance Department Electrical and Instrumentation Section</p><p>Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Supervisor, Control Systems Direct reports</p><p>Job purpose:</p><p>Designs, analyzes, implements and maintain control systems to regulate and optimize various processes in the Process &amp; non Process areas, under Control Systems Supervisor scope, acting as Supervisor player and part of the site s management team using his/her technical expertise to develop solutions regarding quality problems of control system, including all aspects of maintaining control system asset installed based, supporting on new E&amp;I projects, and support for troubleshooting/repair/ and maintaining control system equipment by: (1) manage and ensure the availability of the site s Emergency Shutdown System (ESD), the Distributed Control System (DCS), and PLC-based control loops while proactively promote process safety initiatives, (2) Develop solutions to maintenance and quality problems of control systems in OQ8 plant 3) supporting on new automation projects, and (4) Interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at OQ8 in designated areas, (5) Providing professional technical advice, guidance and support to the team, (6) Identify opportunities of improvement, as well as assess and support improvement proposals from others, and (7) Guide Control system team members in related Control System matters; in order to ensure that the assets and equipment are available at all times, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ8 talent pipeline.</p><p>Main Tasks Responsibilities:</p><ul><li>Ensure compliance with HSE procedures, conduct toolbox meetings and risk assessments, and execute maintenance activities under the Supervisor supervision.</li><li>Receives assignment or work orders to execute all assigned works for E&amp;I maintenance Control Systems.</li><li>Collect data from field and report them through proper communication channels.</li><li>Be familiar with the operation, maintenance, and troubleshooting of various control systems and instrumentation.</li><li>Receives assignment or work orders from supervisor and coordinates with E&amp;I department activities with other peers for troubleshooting and repair works on distributed Control System and Logic controllers.</li><li>Support in troubleshooting and tuning on complex control loops</li><li>Support in programming of various Programmable Logic controllers.</li><li>Execute Control systems maintenance services on planned / un-planned maintenance (CM, PM &amp; TA) activities.</li><li>Execute projects initiated through MOC, RCA and another upgradation means as applicable.</li><li>Support operations to ensure equipment/system performance is within defined Operating Envelope and regularly conduct Alarms management review.</li><li>Provide support in terms of instrument troubleshooting, upset conditions and abnormal situations</li><li>Support Supervisor to upgrade and identify obsolete systems like but not limited to DCS, ESD/IPS, FGS, RTU and PLC systems</li><li>Support Supervisor for receiving and analysing periodic reports on control systems maintenance and scheduled turnarounds and determines the best course of action for increasing efficiency.</li><li>Support supervisor for the spare parts, ensure min/max inventory, and perform Monthly analysis to ensure the spares critical spares part availability.</li><li>Perform Equipment and spare partis critically</li><li>Ensure end-user satisfaction with maintenance corrective actions and close SAP notifications (Work Orders) upon job completion.</li></ul><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment. Moderate to intensive computer screen use. Shift</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma in Electronic &amp; Telecommunication or Instrument or Electrical Engineering</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Technician 2 years of relevant experience</li><li>Sr. Technician 4 years of relevant experience</li><li>Experience as Control Systems or Instrument Technician</li><li>Knowledge of refinery and petrochemical plant operations.</li><li>Experience in static equipment maintenance, Workshop activities.</li><li>Experience in workshop testing and repair techniques</li><li>Knowledge of maintenance best practices.</li><li>Ability to work with computer-based Business Applications (SAP)</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Customer service skills.</li><li>Refining and petrochemical industry.</li><li>Maintaining and troubleshooting of Distributed Control System.</li><li>Maintaining and troubleshooting PLCs.</li><li>Familiar to SAP system transactions &amp; reports.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Renewable Energy Technician, you will support the production of wind turbine blades and the mechanical and electrical assembly of nacelle and hub systems. This entry-level role provides hands-on experience in composite manufacturing, structural assembly, mechanical integration, electrical installation, process control, and quality-controlled production processes.</p> <p>Trainees will work under the supervision of engineers, trainers, and senior technicians to ensure that all production activities meet strict quality, safety, documentation, and performance standards. The program is designed to develop practical manufacturing competencies required for future employment in wind turbine component production.</p> <p><strong>Key Responsibilities and Training Scope: br&gt;</strong></p> <p><strong>Blade Manufacturing and Composite Production</strong></p> <ul> <li>Participate in theoretical and practical training on wind turbine blade structure, factory rules and discipline, attendance and working time management, cutting room processes, raw materials, molds, supporting equipment, and workplace safety.</li> <li>Assist in mold preparation, material cutting and kitting, fabric layup, overlap control, core material protection, root prefabrication, precast component production, spar cap/main beam preparation, shell production, and related fixture operations.</li> <li>Handle fiberglass, carbon fiber, resins, bonding agents, core materials, auxiliary materials, and consumables in accordance with work instructions, safety requirements, and production procedures.</li> <li>Support resin infusion, vacuum preparation, infusion layout, valve operation, curing profile control, blanket covering, hardness/TG checks, debagging, demolding, and auxiliary material removal.</li> <li>Support web bonding and shell bonding activities, including bonding surface preparation, glue mixing, paste application, gantry and lifting fixture positioning, dry-fit checks, bonding gap adjustment, perimeter vacuum control, mold closing, and inner reinforcement layup.</li> <li>Perform trimming, root surface trimming, and root milling support, sanding, grinding, putty application, surface finishing, touch-up, coating, painting, leading-edge protection, add-ons installation, marking, and delivery/shipping preparation.</li> <li>Support blade weighing, weight-balance calculation, balance correction, production record preparation, certificate of conformity inspection support, and final production documentation.</li> <li>Identify defects, support repair activities, follow NCR and repair processes, and participate in defect improvement and root-cause corrective action activities under supervision.</li> </ul> <p><strong>Nacelle and Hub Assembly</strong></p> <ul> <li>Support the assembly of nacelle structures and hub-related mechanical systems in accordance with engineering documentation, standard operating procedures, and production plans.</li> <li>Assist in the installation and integration of major nacelle components, including gearbox, generator, main shaft, yaw system, cooling systems, hydraulic systems, and related structural and mechanical parts.</li> <li>Install mechanical components, electrical cabling, hydraulic lines, and auxiliary systems while following approved work instructions and safety requirements.</li> <li>Use torque tools, measuring instruments, and precision assembly equipment to meet specified tolerances and assembly requirements.</li> <li>Assist in alignment checks, functional testing, pre-dispatch inspections, and readiness checks before delivery or handover.</li> <li>Maintain production records and follow standardized work procedures, quality checklists, and engineering documentation.</li> </ul> <p><strong>Quality Assurance, Safety, Process, and Maintenance Exposure</strong></p> <ul> <li>Receive basic quality and inspection training, including the use of measuring instruments, quality checklists, production records, and inspection documentation.</li> <li>Support raw material inspection for main and auxiliary materials, visual inspections, dimensional checks, process checks, defect criteria learning, and onsite quality-control activities.</li> <li>Learn quality control points for component production, shell layup, infusion and curing, debagging, web bonding, shell bonding, finishing, paint inspection, UT scan support, and certificate of conformity documentation.</li> <li>Follow PPE requirements, safety education, job safety analysis requirements, workplace hazard identification, daily safety inspection</li> <li>Understand production compliance with SOPs, drawing review, production daily reporting, defect repair follow-up, root-cause corrective action, and continuous improvement activities.</li> <li>Gain exposure to operation and basic maintenance of production equipment such as vacuum pumps, infusion machines, paste/glue machines, gantries, rotation equipment, root milling machines, molds, and related facilities.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Higher Diploma in Mechanical Engineering, Electrical Engineering, or Chemical Engineering or related field.</strong></p> <ul> <li>Recent graduate or up to three (3) years of internship or work experience in manufacturing or industrial environments.</li> <li>Must be under thirty-five (35) years of age.</li> <li>Candidates must not have previously benefited from any government or private initiative.</li> <li>Candidates must be registered as a job seeker or must have resigned from their previous employment for at least three (3) months.</li> <li>Fluency in English, with good documentation, reporting, and communication skills.</li> <li>Willingness and ability to participate in full-time training, possible shift work, and international deployment to China where required.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Renewable Energy Technician Trainee, you will support the production of wind turbine blades and the mechanical and electrical assembly of nacelle and hub systems. This entry-level role provides hands-on experience in composite manufacturing, structural assembly, mechanical integration, electrical installation, process control, and quality-controlled production processes.</p> <p>Trainees will work under the supervision of engineers, trainers, and senior technicians to ensure that all production activities meet strict quality, safety, documentation, and performance standards. The program is designed to develop practical manufacturing competencies required for future employment in wind turbine component production.</p> <p><strong>Key Responsibilities and Training Scope</strong></p> <p>Blade Manufacturing and Composite Production</p> <ul> <li>Participate in theoretical and practical training on wind turbine blade structure, factory rules and discipline, attendance and working time management, cutting room processes, raw materials, molds, supporting equipment, and workplace safety.</li> <li>Assist in mold preparation, material cutting and kitting, fabric layup, overlap control, core material protection, root prefabrication, precast component production, spar cap/main beam preparation, shell production, and related fixture operations.</li> <li>Handle fiberglass, carbon fiber, resins, bonding agents, core materials, auxiliary materials, and consumables in accordance with work instructions, safety requirements, and production procedures.</li> <li>Support resin infusion, vacuum preparation, infusion layout, valve operation, curing profile control, blanket covering, hardness/TG checks, debagging, demolding, and auxiliary material removal.</li> <li>Support web bonding and shell bonding activities, including bonding surface preparation, glue mixing, paste application, gantry and lifting fixture positioning, dry-fit checks, bonding gap adjustment, perimeter vacuum control, mold closing, and inner reinforcement layup.</li> <li>Perform trimming, root surface trimming and root milling support, sanding, grinding, putty application, surface finishing, touch-up, coating, painting, leading-edge protection, add-ons installation, marking, and delivery/shipping preparation.</li> <li>Support blade weighing, weight-balance calculation, balance correction, production record preparation, certificate of conformity inspection support, and final production documentation.</li> <li>Identify defects, support repair activities, follow NCR and repair processes, and participate in defect improvement and root-cause corrective action activities under supervision.</li> </ul> <p>Nacelle and Hub Assembly</p> <ul> <li>Support the assembly of nacelle structures and hub-related mechanical systems in accordance with engineering documentation, standard operating procedures, and production plans.</li> <li>Assist in the installation and integration of major nacelle components, including gearbox, generator, main shaft, yaw system, cooling systems, hydraulic systems, and related structural and mechanical parts.</li> <li>Install mechanical components, electrical cabling, hydraulic lines, and auxiliary systems while following approved work instructions and safety requirements.</li> <li>Use torque tools, measuring instruments, and precision assembly equipment to meet specified tolerances and assembly requirements.</li> <li>Assist in alignment checks, functional testing, pre-dispatch inspections, and readiness checks before delivery or handover.</li> <li>Maintain production records and follow standardized work procedures, quality checklists, and engineering documentation.<br></li> </ul> <p>Quality Assurance, Safety, Process, and Maintenance Exposure</p> <ul> <li>Receive basic quality and inspection training, including the use of measuring instruments, quality checklists, production records, and inspection documentation.</li> <li>Support raw material inspection for main and auxiliary materials, visual inspections, dimensional checks, process checks, defect criteria learning, and onsite quality-control activities.</li> <li>Learn quality control points for component production, shell layup, infusion and curing, debagging, web bonding, shell bonding, finishing, paint inspection, UT scan support, and certificate of conformity documentation.</li> <li>Follow PPE requirements, safety education, job safety analysis requirements, workplace hazard identification, daily safety inspection</li> <li>Understand production compliance with SOPs, drawing review, production daily reporting, defect repair follow-up, root-cause corrective action, and continuous improvement activities.</li> <li>Gain exposure to operation and basic maintenance of production equipment such as vacuum pumps, infusion machines, paste/glue machines, gantries, rotation equipment, root milling machines, molds, and related facilities.<br></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Higher Diploma in Mechanical Engineering, Electrical Engineering, or Chemical Engineering.</strong></p> <ul> <li>Recent graduate or up to three (3) years of internship or work experience in manufacturing or industrial environments.</li> <li>Must be under thirty-five (35) years of age.</li> <li>Candidates must not have previously benefited from any government or private initiative.</li> <li>Candidates must be registered as a job seeker or must have resigned from their previous employment for at least three (3) months.</li> <li>Fluency in English, with good documentation, reporting, and communication skills.</li> <li>Willingness and ability to participate in full-time training, possible shift work, and international deployment to China where required.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>KEY ACCOUNTABILITIES:</p><p>Description</p><p>Project Management Plan and organize/supervise the activities to ensure that all works are carried out in an efficient manner which is consistent with allocated budget and manhours (MH) for each department Update the statues of budget in daily basis and provide constructive feedback to Production departments to support their overall performance and controlling MH. Review and interpret design drawings and specifications to ensure technical and practical execution of work. Provides resolution for technical engineering problems across disciplines and coordinates application of solutions. To prepare progress reports and conduct progress meetings with clients on a regular basis for all engineering, procurement, fabrication and commissioning activities related to the Project. Responsible for overall planning and execution of the project, supervision, team management, schedule, quality and safety management, risk management and client management once the Project Job Order is issued throughout the project lifecycle, and delivery of project in accordance with the scope and schedules while satisfying the project’s technical and quality requirements. The jobholder will be the focal point for client, subcontractor and ODC management team. To develop strategies and contingency plans of the Project. To ensure that construction man powers are fully managed and informed about the progress of the Project and that all project instructions are adhered to. To coordinate constructability input and interface with production department to ensure good communication. Ensuring the work proceeds on schedule and develop action plans to maintain schedule or to catch up on any delayed work. To organize, plan and manage the execution of commission activities in every phase of the project and secure adequate resources. Coordination of the project commissioning plan and schedules closely Master Schedule Prepare of Project Schedule, using Primavera “P6” version or higher of planning or similar platform tools for Project Scheduling to be advantageous to the candidates. with all new build sequence according to the budget allocated, and submit it to the DH/TL to receive feedback in order to develop a comprehensive schedule for the various departments to commence their work within the budget allowed in the Job order. To make plan, schedule and report progress for all Work required to meet the Contract Schedule, including all necessary interfacing with other parties. To organize, plan and manage the execution of commission activities in every phases of the project and secure adequate resources Docking-Undocking Managing Manage the docking/undocking of Project in collaboration with the Client, Master of Vessel, Agents and Production Control department in order to ensure project development as per timelines.  Pre-arrival Meetings and KoM Organize and lead the pre-arrival meetings with all respective Project In-Charge Engineers’ in order to technically explain and clarify the client’s requirements and specifications. Organize and lead the KOM (Kick-off Meeting) with all respective Project In-Charge Engineers and  Client’s representatives in order to technically explain, clarify and agree with all parties involved the requirements and specification for the purpose of the Project Technical Advice and Troubleshooting Provide technical advice to the Project in-charge Engineers, from issuance of job order to completion of the repair work to support them in achieving their jobs within the budget. Provide technical advice and support to the internal departments giving feedback and recommendations on the work summary report, or project status, in order to ensure completion of the project activities on time and as per client/contract requirements. Client Interaction Review the expenditure and cost, budgets and MH utilization in the department in order to ensure the cost does not exceed the established budget for the department.  Resources Control and Allocation Coordinate with the clients to get all queries / clarifications resolved before the start of job, or during the project, in order to ensure all requirements are clearly understood by various Production departments and reduce the amount of rework required at later stages. Communicate the Client’s responses, or specifications, to the respective departments in ODC in order to ensure clear communication protocols To implement a comprehensive document management system in accordance with Client’s requirement of the Project.  Progress Updates and Documentation Ensure that all Project Manager activities findings and updates are reported to the Department format so that critical events and potential delays are timely and accurately communicated for prompt action, thus minimizing impact on overall schedules. Ensure that any additions or cancellation of work as per the original agreed scope according to the standard format, technically correct and can be carried out. Review, manage and ensure the development and issuance of relevant department documentation, progress, challenges and issues faced in order to ensure timely and accurate availability for any future reference and to ensure timely resolution of escalated issues.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h4>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</h4><p>Minimum Qualifications:</p><p>Bachelor’s Degree in Naval Architecture/ Mechanical Engineering/ Electrical Engineering or equivalent</p><p>PMP certificate </p><p>Minimum Experience:</p><p>8 years of relevant experience in project management as Newbuilding Project manager working in any shipyards </p><p>Skills</p><ul><li>Full time in charge in Vessel New-build Project.</li><li>Experience in controlling/following the Budgets, Manhours and planning.</li><li>Communication and interpersonal skills</li><li>Analytical thinking skills in technical activities.</li><li>Project Management skills</li><li>Problem Solving skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Bachelor of Technology/Engineering(Civil), Master of Technology/Engineering(Civil)</p><br><br><ul><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p></li><li><p><strong>OMAN experience is Must.</strong></p></li><li><p><strong>MINISTRY Experience is preferred.</strong></p></li><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p>Desired Candidate Profile</p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p><br></li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Building Construction project only </p></li><li><p>OMAN experience is Must.</p></li><li><p>MINISTRY Experience is preferred.</p></li></ul><p></p></section>

<p><h4>Location</h4> <p>Oman, Muscat</p> <h4>Start date</h4> <p>September 2026</p> <h4>Duration</h4> <p>12 months renewable contract</p> <h4>Key responsibilities</h4> <ul> <li>Conduct technical training needs analysis (TNA)</li> <li>Develop, implement, and maintain technical training programs, including detailed training syllabi and course structures</li> <li>Ensure all training programs meet regulatory and compliance requirements and align with industry best practices</li> <li>Manage and continuously review training programs to ensure adherence to LNG regulations and operational standards</li> <li>Develop and implement training policies and procedures</li> <li>Prepare training manuals and deliver approved technical training courses for engineering and maintenance personnel</li> <li>Plan and manage short and long-term training schedules, resources, and budgets</li> <li>Establish KPIs and monitor training effectiveness and performance metrics</li> <li>Maintain and update training materials to ensure alignment with operational requirements</li> <li>Ensure availability and accessibility of training documentation for all stakeholders</li> <li>Assess trainee performance and maintain training records</li> <li>Liaise with external authorities for training approvals and with external training providers</li> <li>Ensure adequate availability of qualified instructors, assessors, and examiners</li> <li>Develop competency frameworks and oversee competency-based training systems</li> <li>Manage training-related contracts, including scope development and lifecycle administration</li> <li>Promote HSE culture and ensure compliance with HSE regulations and training requirements</li> <li>Support competency development initiatives including coaching, mentoring, and succession planning</li> <li>Develop and implement on-the-job training (OJT) frameworks</li> <li>Ensure compliance with company policies and perform additional duties as required</li> </ul> <h4>Required qualifications</h4> <ul> <li>Bachelor's degree in engineering or relevant discipline (Master's preferred)</li> <li>OPITO certified assessor</li> <li>Training of Trainers (TOT) certification</li> <li>10–12+ years of LNG industry experience, including at least 5 years in technical training</li> <li>Experience in engineering training, assessment, and examination</li> <li>Strong knowledge of technical training standards and regulatory requirements</li> <li>Proven ability to develop and manage competency frameworks and training systems</li> <li>Experience working with cross-functional teams in operational environments</li> <li>Strong leadership, coaching, and mentoring capabilities</li> <li>Excellent communication and analytical skills</li> <li>Fluent in written and spoken English</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining, and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Superintendent to supervise and manage site execution of all instrumentation related precommissioning and commissioning activities on a large LNG facility. The role is fully site based and focuses on field supervision, workforce coordination, safety, and execution readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <h4>Key responsibilities</h4> <ul> <li>Supervise and coordinate instrumentation PCC field activities in line with approved procedures and schedules</li> <li>Manage and direct instrument technicians, supervisors, and subcontractors on site</li> <li>Ensure instrumentation systems are ready for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Oversee execution of: <ul> <li>Instrument installation checks and verification</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer installation and commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) status and ensure punch list closure for instrumentation scope</li> <li>Coordinate daily activities with construction, electrical, automation, operations, HSE, and QA/QC teams</li> <li>Support DCS, ESD, F&G, and PLC testing in coordination with vendors and commissioning engineers</li> <li>Ensure strict compliance with: <ul> <li>PTW systems</li> <li>SIMOPS requirements</li> <li>HSE procedures and risk assessments</li> </ul> </li> <li>Monitor field progress, productivity, constraints, and safety performance</li> <li>Report daily and weekly status to the Instrumentation Lead / Commissioning Manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong><br> Diploma or Bachelor’s degree in Instrumentation, Control, Electrical, or related discipline</p> <p><strong>Experience</strong><br> Minimum 12 years experience in oil & gas or LNG projects<br> Proven experience as Instrumentation Superintendent or Senior Instrument Supervisor during precommissioning and commissioning phases<br> Strong hands-on site experience on large EPC projects<br> Extensive exposure to LNG or gas processing facilities<br> Candidates without direct site supervision responsibility in PCC phases will not be considered.</p> <p><strong>Technical expertise</strong><br> Strong practical knowledge of: <ul> <li>Instrumentation PCC workflows and field execution</li> <li>Loop checks, cause & effect testing, calibration, and valve testing</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> </ul> Ability to read and work from: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop drawings and hookups</li> <li>Commissioning check sheets and test packs</li> </ul> </p> <p><strong>Supervisory & professional skills</strong><br> Strong field leadership and workforce management capability<br> Safety driven mindset with solid PTW and SIMOPS experience<br> Practical, hands-on problem solver<br> Clear communication in English<br> Comfortable working in demanding, multicultural site environments</p> <p><strong>Ideal background</strong><br> EPC contractor commissioning background<br> LNG precommissioning and commissioning field leadership experience<br> Middle East project experience (preferred)</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Superintendent to supervise and manage site execution of all instrumentation related precommissioning and commissioning activities on a large LNG facility. The role is fully site based and focuses on field supervision, workforce coordination, safety, and execution readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <h4>Key responsibilities</h4> <ul> <li>Supervise and coordinate instrumentation PCC field activities in line with approved procedures and schedules</li> <li>Manage and direct instrument technicians, supervisors, and subcontractors on site</li> <li>Ensure instrumentation systems are ready for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Oversee execution of: <ul> <li>Instrument installation checks and verification</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer installation and commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) status and ensure punch list closure for instrumentation scope</li> <li>Coordinate daily activities with construction, electrical, automation, operations, HSE, and QA/QC teams</li> <li>Support DCS, ESD, F&G, and PLC testing in coordination with vendors and commissioning engineers</li> <li>Ensure strict compliance with: <ul> <li>PTW systems</li> <li>SIMOPS requirements</li> <li>HSE procedures and risk assessments</li> </ul> </li> <li>Monitor field progress, productivity, constraints, and safety performance</li> <li>Report daily and weekly status to the Instrumentation Lead / Commissioning Manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong><br> Diploma or Bachelor’s degree in Instrumentation, Control, Electrical, or related discipline</p> <p><strong>Experience</strong><br> Minimum 12 years experience in oil & gas or LNG projects<br> Proven experience as Instrumentation Superintendent or Senior Instrument Supervisor during precommissioning and commissioning phases<br> Strong hands-on site experience on large EPC projects<br> Extensive exposure to LNG or gas processing facilities<br> Candidates without direct site supervision responsibility in PCC phases will not be considered.</p> <p><strong>Technical expertise</strong><br> Strong practical knowledge of: <ul> <li>Instrumentation PCC workflows and field execution</li> <li>Loop checks, cause & effect testing, calibration, and valve testing</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> </ul> Ability to read and work from: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop drawings and hookups</li> <li>Commissioning check sheets and test packs</li> </ul> </p> <p><strong>Supervisory & professional skills</strong><br> Strong field leadership and workforce management capability<br> Safety driven mindset with solid PTW and SIMOPS experience<br> Practical, hands-on problem solver<br> Clear communication in English<br> Comfortable working in demanding, multicultural site environments</p> <p><strong>Ideal background</strong><br> EPC contractor commissioning background<br> LNG precommissioning and commissioning field leadership experience<br> Middle East project experience (preferred)</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Leads and coordinates, the Instrument Maintenance Works and the designated team for the assigned location at OQ8 under Head Maintenance scope as, as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / unplanned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products, and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works (4) Lead the designated staff (team) and external contractors in performing instrument maintenance services on planned / un-planned maintenance (CM, PM &amp; TA) activities ; in order to ensure plant equipment availability, reliability &amp; optimization of cost/resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justification s, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Accountable for the availability of Instrumentations, Analyzers and Controls systems, UPS/BC, and communication system of the area.</li><li>Oversee maintenance of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Emergency Shutdown (ESD) systems, and Fire &amp; Gas (F&amp;G) detection devices.</li><li>Interface and integration with rotating equipment such as pumps and turbines.</li><li>Experience with CCC (Compressor Control Corporation) systems.</li><li>Process safety knowledge and application.</li><li>Monitor spare parts inventory, verify technical specifications for replacements, and manage vendor/contractor service</li><li>Troubleshooting, commissioning, and maintenance of field instrumentation systems</li><li>Ensure application of best work practices in the execution of Instrumentations maintenance jobs.</li><li>Responsible for Instrumentations side of project implementation in OQ8 facilities.</li><li>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs. Maintaining a healthy, low volume of outstanding corrective maintenance work orders.</li><li>Prepares procurement plan for his section.</li><li>Responsible for preparing the LLF of instruments and their implementations</li><li>Participate in Management of Change (MOC) committee review meetings.</li><li>Ensure Instrument equipment maintenance history &amp; reports are updated in SAP (CMMS)</li><li>Identify the critical issues, repetitive failure of Instrument equipment, done and the RCA Recommendations implemented for the area</li><li>Monitors staff attendance, attitude and implements discipline within the section.</li><li>Prepare annual leave plans</li><li>Directs, supervises, and controls all work for instrument maintenance and calibration.</li><li>Receives and analyses periodic reports on instruments maintenance and scheduled turnarounds and determines the best course of action for increasing the Section s efficiency.</li><li>Provides full technical &amp; manpower support during plants shutdown.</li><li>Determines long-term instrument maintenance policy and oversees detailed planning of maintenance activities and programs.</li><li>Reviews policies of warehouse materials/spare parts and determines the strategy of their handling and procurement and ensures availability.</li><li>Coordinates efforts within the Section to develop guidelines, specifications, best practices, and procedures for maintenance of pressure, level, flow, temperature, vibration, and pH instruments.</li><li>Maintains technical expertise in functional areas of process instrumentation.</li><li>Carries out the technical evaluation of bids and generates the evaluation report.</li><li>Develops IDP of Omanis within the section, prepares training programs, and monitors their implementation.</li><li>Zero Lost Time Incidents (LTIs) and full compliance with safety audits.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</li><li>External: Contractors, Vendors &amp; Suppliers</li></ul><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications for this position is Degree in Instrumentation Engineering or similar</li><li>Min. exp 10 Years. 5+ years of experience in Instrument Equipment Maintenance Services inclusive of 4 years of relevant experience in Team Leader</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Minimum 10 years of which 5+ years of experience in Instrument Equipment Maintenance Services inclusive of 4 years of relevant experience in Team Leader (Oil &amp; Gas / Petrochemical or Refinery Plant experience preferred).</li><li>Knowledge of maintenance processes for the following refinery operations:</li><ul><li>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</li><li>Hydro Processing Complex (HCU/ARU/SRU/SWS/DHT/HPU/PSA)</li><li>Sulfur/Utilities Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</li><li>Offsite/Logistics Complex Operations (Crude Receiving Terminal, Refinery Tankage, product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</li></ul><li>Knowledge of instrument control loops.</li><li>Familiar with Systems, Applications, and Products in data processing (SAP).</li><li>Experience in Local control station/ Plant interface bus and DCS.</li><li>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</li><li>Experience and knowledge in project planning, cost control, contract development, installation, troubleshooting, and start-up.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling Maintenance Contracts and shutdown-related jobs.</li><li>Knowledge of :</li><ul><li>Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM</li><li>Process Equipment Life-Cycle Management</li></ul><li>Good knowledge in Quality Assurance, Quality Control, and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</li><li>Manage updates to PC-based instrumentation databases and ensure "as-built" Piping and Instrument Diagrams (P&amp;IDs) and loop sheets are current.</li><li>Through the use of facts</li><li>Troubleshooting and Result oriented</li><li>Root Cause Analysis (RCA)</li><li>Reading and interpreting engineering drawings</li><li>Project Management</li><li>Developing and Modifying Technical Procedures</li><li>Verbal and writing reporting skills-effective Communication</li><li>Leadership and people management skills</li><li>Demonstrated leadership impact to deliver improved and sustained performance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li><li>Ability to manage multiple priorities in a diversified and critical environment.</li><li>Ability to align the requirements of operations and maintenance</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Strong communication, conflict resolution, and decision-making capabilities during plant emergencies</li><li>Knowledge in estimating, budgeting, and cost control.</li></ul><p></p></section>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>JOB PURPOSE:</b></p><p>Identify/understand and execute the exact scope of work from specification, commercial tender, worklist and on-board identification, highlighting the actual work identified compared to the tender. To provide a completion program, prepare materials, and supervise all types of structural/hull fabrication, installation, refurbishment, and repair activities for all types of ship repair projects. Responsibilities include building new Ships, Floating production storage and offloading, Floating Storage and Regasification Unit conversion, and all kinds of Oil Rig projects. Executions of all relevant activities shall be in accordance with the project-agreed timelines, quality plan, and HSE standards established within ADC.</p><p><b>KEY ACCOUNTABILITIES:</b></p><p><b>Description</b></p><p><b>Supervision of Subordinates</b></p><ul><li>Organize and supervise the activities and work of subordinates to ensure that departmental work is carried out efficiently and consistently with operating policies and procedures</li><li>Provide on-the-job training and constructive feedback to subordinates to support their overall development</li><li>Supervise the Structural/Hull fabrication process and handling of materials to ensure the activities are completed according to timelines, budget man hours, and approved standards practices</li><li>Responsibilities include project execution, including maintaining quality standards, cost-effectiveness and time management to ensure projects are on time and within budget</li></ul><p><b>Day-to-Day Operations</b></p><ul><li>Schedules  Review scheduling and planning charts and documents and perform periodical inspections of the work site to track the progress of hull jobs such as dimensions, specifications and steel cutting and provide necessary guidance on the resolution of related issues to guarantee all hull job issues are resolved on time and to confirm high-quality deliverables.</li><li>Prepare the budget of the activities (Man- hour)</li><li>Prepare the schedule for the critical Activities according to the master schedule from SRM</li><li>Open the working code for additional activities</li><li>Monitor and control the activity time (tracking the progress) and reporting</li><li>Monitor and control the activities budget and prepare the reports</li><li>Monitor and control the consumable and preparation report (coils)</li><li>Streamline and finalize the KPI indicators for the Hull Fabrication department</li><li>Analyze project profit (in terms of MHR) and suggest areas of improvement</li><li>Document project WCR /Analysis report/Lessons learnt/welding coil consumption analysis etc.</li><li>Document 5weeks plan monitoring</li></ul><p><b>Resources Control</b>  </p><ul><li>Coordinate with the Production Control department and provide input on the planning of resources and budget required for hull activities to ensure the plan created considers all activities’ requirements</li><li>Oversee the monitoring and control of materials, equipment and manpower resources in the Hull department and continuously update the Production Control department to highlight any inconsistencies or deviations in the plan well in advance, allowing for pan modification and appropriate action taken</li><li>Liaise with the Contract and Procurement department for equipment to be purchased for hull activities based on the engineers recommendations to ensure the latest tools and technology are used</li></ul><p><b>Quality Control</b>  </p><ul><li>Ensure adherence to and maintenance of the quality of Hull Fabrication activities to ensure readiness for quality control inspections</li></ul><p><b>Progress Updates and Documentation</b>  </p><ul><li>Ensure that all activities findings of the department and production updates are reported to the Department Head –using the agreed format so that critical events and potential delays are timely and accurately communicated for prompt action, thus minimizing impact on overall schedules</li><li>Review, manage and ensure the development of relevant hull activities documentation, progress challenges and issues faced to ensure timely and accurate availability for any future reference and to ensure timely resolution of escalated issues</li></ul><p><b>Technical Advice and Troubleshooting</b>  </p><ul><li>Provide technical advice to subordinates on department-related matters to support them in achieving their jobs and to internal departments (e.g. – Production Engineers’) to provide them with feedback and recommendations for future improvement based on technical issues faced in manufacturing</li></ul><p><b>Continuous Improvement</b>  </p><ul><li>Motivate subordinates and contribute to the identification of opportunities for continuous improvement of systems, processes and practices, considering leading practices, improvement of processes and productivity improvement  </li></ul><p><b>Policies, Systems, Processes &amp; Procedures</b>  </p><ul><li>Implement approved Hull departmental policies, processes and procedures, provide instructions to subordinates and monitor their adherence so that work is carried out in a controlled manner  </li></ul><p><b>Quality, Health, Safety, &amp; Environment</b>  </p><ul><li>Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high- quality products/services and a responsible environmental attitude  </li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in industrial engineering/ mechanical engineering/ electrical engineering/ Naval Architecture or equivalent</li><li>10 years of relevant experience in Jib cranes and switchgears, heavy lifting equipment, generators, CNC Machines and PLC, drives and other workshop facilities in shipyard or heavy industries</li><li>Understanding of general mechanical drawing, mechanical process and sequence drawing</li><li>Communication and interpersonal skills</li><li>Leadership skills</li><li>Analytical thinking skills, Project Management skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>About GE Vernova GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world s challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world. GE Vernova s Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, FieldCore installs, maintains and upgrades power generation equipment, enabling operators of the world s energy infrastructure to provide more reliable and affordable energy. Job Summary: A TFA FEP is an entry level position. You will start by being enrolled in FieldCore s Field Engineering Program (FEP). While in the FEP, you will develop in-depth technical expertise, lean thinking and leadership skills and will have a unique opportunity to go through: In-person and Online training Curriculum On-the-job trainings Learning from experienced Technical Field Advisors (TFA s) You will gain experience and grow your career while traveling and helping provide power to communities. Upon successful graduation from the FEP program, you will be eligible for a TFA position. The TFA travels to customer sites and supports customers with installation, maintenance, and warranty work with industrial power generation rotating equipment (Gas/Steam turbines). This position requires technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams, dial and laser alignment and thermal growth equipment. Implements and executes the work under safety and environmental policies, serving as an example for others and provide full and active commitment in the deployment of the EHS Policies and any additional project-specific written statement or procedure. Essential Duties &amp; Responsibilities: Manage, perform, coordinate the management of site activities Perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation Respond to requests for emergency repairs and services to troublesome equipment Provide technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites Perform administrative functions such as: writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis Signs off on all changes implemented Drive customer satisfaction through commitment to quality Maintain strong safety mindset to assure the executed work reflects the technical requirements within GE safety standards Knowledge to troubleshoot and provide routine maintenance checkout for wide range of equipment vintage Coach, mentor, and train other team members as required, to impart and perpetuate field engineering and/or product knowledge Prepare timely and accurate technical reports for customer records and a reference for future outages Ensure all parts needed for the job are shipped to the site Perform walk-downs during installation to ensure that the customer s contractors are working properly Perform aftermarket upgrades that need to be performed at the site level Ability and willingness to work holidays, weekends and overtime as required by field assignments Extensive travel to and from projects and various field assignments will be required May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values. Ability and willingness to work holidays, weekends and overtime as required by field assignments Manage and develop employees</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Qualifications &amp; Experience : Technical/University degree or qualifying experience OR a High School Diploma / GED with a minimum of 4 years of experience in a Field Services role 3+ years of experience in a field services or power generation equipment maintenance position Strong technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams dial and laser alignment and thermal growth equipment Extensive travel to and from projects and various field assignments will be required English proficiency required Desired Characteristics: Introductory level. Most new hires with little experience on the GE Product will start in this level. Participates in on-the-job training. Experience and training on Alstom, Siemens, or other OEM equipment Extensive Field Engineering Services experience Strong organizational and project management skills Strong oral and written interpersonal, communication, and leadership skills Strong business acumen and ability to sell GE products to the customer</p><p></p></section>

<p><h4>Job overview</h4> <p>A’soud Global School (AGS) Muscat is seeking a well-qualified, passionate and motivated teacher of physics to join an ambitious, supportive and successful science team at our thriving international school in the heart of Oman’s capital.</p> <p>We are seeking a dynamic and knowledgeable secondary and sixth form physics teacher who can bring the subject to life across Key Stages 3–5, including to IGCSE, AS-level and A-level student cohorts. The ideal candidate will have strong subject expertise in physics, a secure understanding of practical and experimental work, and the ability to guide students in developing analytical thinking, problem-solving skills and scientific literacy.</p> <p>This is an exciting opportunity for a teacher who is passionate about physics education, committed to high academic standards, and eager to inspire the next generation of scientists, engineers and critical thinkers.</p> <h4>About us</h4> <p>AGS Muscat is a vibrant, co-educational international school located in the Al Seeb area of Muscat, in the Sultanate of Oman. Since opening in September 2016, we have established ourselves as a dynamic learning community built on our core belief that ‘all can achieve’.</p> <p>We provide a high-quality, ‘all-through’ international education from early years to sixth form. Our curriculum, which follows the Cambridge Early Years programme and the globally respected Cambridge International Curriculum, ensures a programme that is flexible, challenging and culturally responsive, and carefully adapted to meet the needs of our diverse international community.</p> <p>In the primary phase, students benefit from a broad and balanced range of Cambridge subjects, leading to the internationally recognised Cambridge Checkpoint assessments in Grade 6. In the secondary and sixth form phases, students select from an extensive range of IGCSE, AS-level and A-level subjects, enabling them to pursue pathways aligned with their strengths, interests and future aspirations. Arabic is taught across the school and tailored to students’ language levels, while Islamic education is offered to Muslim students in accordance with the Ministry of Education framework.</p> <p>At AGS Muscat, our principal aim is for students to be safe, happy and successful. We measure success in its fullest sense - not only through strong academic outcomes, but through the development of confident, well-rounded young people who are equipped to thrive in the 21st century. We encourage high aspirations from an early age within a creative, disciplined and supportive environment that promotes curiosity, resilience, leadership and teamwork.</p> <p>Learning takes place within a purpose-built campus offering state-of-the-art facilities. These include spacious classrooms, science laboratories, ICT suites, music and art studios, drama rooms, a well-resourced library, outdoor multi-games courts, swimming and splash pools and an indoor multi-purpose sports hall. These facilities support a rich programme of academic, sporting, creative and co-curricular opportunities, both locally and internationally.</p> <p>Our staff comprise highly qualified British-trained and international educators working alongside dedicated locally employed colleagues. Together, they are united by a shared commitment to providing outstanding educational experiences and nurturing the potential of every child.</p> <p>Our ambition is that when students leave AGS Muscat, they do so with the knowledge, skills, values and character to enter the next stage of their journey with confidence - as caring, responsible and effective global citizens, ready to contribute meaningfully to the world around them.</p> <h4>Life in Muscat</h4> <p>Muscat, the capital of Oman, is a vibrant coastal city where modern living blends seamlessly with rich Arabian heritage. Nestled between the Hajar Mountains and the Gulf of Oman, it offers a high quality of life in a safe, welcoming and relaxed environment.</p> <p>Known for its warm hospitality and strong sense of community, Muscat is especially appealing to international teachers and families. Omani culture is respectful and easy going, and the established expatriate community helps newcomers settle quickly and feel at home.</p> <p>With over 300 days of sunshine each year, the climate encourages an active outdoor lifestyle. Residents enjoy pristine beaches, mountain wadis, desert adventures, dolphin watching, and a wide range of fitness and leisure facilities. The city also features modern shopping malls, international restaurants, cultural festivals, art galleries and the renowned Royal Opera House, alongside traditional souqs and cafés.</p> <p>Muscat International Airport offers excellent regional and global connections, making travel convenient. Combining safety, natural beauty, strong infrastructure and a welcoming atmosphere, Muscat is an outstanding destination for educators seeking both professional opportunity and an exceptional lifestyle.</p> <h4>What we are looking for</h4> <p>We are seeking teachers who will contribute positively to our secondary and sixth form phases, and wider school community. The successful candidate will:</p> <ul> <li>Hold consistently high expectations of all students and believe in every student’s potential;</li> <li>Demonstrate excellent knowledge of the Cambridge and Edexcel physics curriculum and assessment requirements;</li> <li>Plan and deliver engaging, inquiry-based lessons that challenge and stretch all students;</li> <li>Embed practical investigation and laboratory safety at the heart of teaching and learning;</li> <li>Use assessment data effectively to inform planning and support student progress;</li> <li>Prepare students confidently for external examinations;</li> <li>Encourage curiosity about the physical world and link physics to real-world applications and emerging technologies;</li> <li>Contribute positively to a collaborative faculty and wider-school community;</li> <li>Be confident and competent in using digital tools to support research, presentations and assessments;</li> <li>Create a purposeful, inclusive and supportive classroom environment that promotes positive behaviour and high standards;</li> <li>Contribute actively to the school’s ‘one team’ ethos through collaboration and professional openness;</li> <li>Work in close partnership with parents to support students’ progress and wellbeing;</li> <li>Demonstrate a commitment to ongoing professional development and reflective practice.</li> </ul> <h4>Application process</h4> <p>Applications should be submitted via the TES online portal. Due to the anticipated level of interest, only shortlisted candidates will be contacted.</p> <p>To meet visa requirements in Oman, applicants must:</p> <ul> <li>Have at least 3 years of teaching experience (UK or international);</li> <li>Hold a recognised bachelor's degree in the relevant subject;</li> <li>Hold a recognised teaching qualification (B.Ed, PGCE, PGDE or equivalent) in the relevant subject;</li> <li>Be fluent and proficient in spoken and written English.</li> </ul> <p>Early applications are encouraged. The school reserves the right to appoint before the closing date if a suitable candidate is identified.</p></p><p></p>

<p><h4>Job overview</h4> <p>A’soud Global School (AGS) Muscat is seeking a well-qualified, passionate and motivated teacher of physics to join an ambitious, supportive and successful science team at our thriving international school in the heart of Oman’s capital.</p> <p>We are seeking a dynamic and knowledgeable secondary and sixth form physics teacher who can bring the subject to life across Key Stages 3–5, including to IGCSE, AS-level and A-level student cohorts. The ideal candidate will have strong subject expertise in physics, a secure understanding of practical and experimental work, and the ability to guide students in developing analytical thinking, problem-solving skills and scientific literacy.</p> <p>This is an exciting opportunity for a teacher who is passionate about physics education, committed to high academic standards, and eager to inspire the next generation of scientists, engineers and critical thinkers.</p> <h4>About us</h4> <p>AGS Muscat is a vibrant, co-educational international school located in the Al Seeb area of Muscat, in the Sultanate of Oman. Since opening in September 2016, we have established ourselves as a dynamic learning community built on our core belief that ‘all can achieve’.</p> <p>We provide a high-quality, ‘all-through’ international education from early years to sixth form. Our curriculum, which follows the Cambridge Early Years programme and the globally respected Cambridge International Curriculum, ensures a programme that is flexible, challenging and culturally responsive, and carefully adapted to meet the needs of our diverse international community.</p> <p>In the primary phase, students benefit from a broad and balanced range of Cambridge subjects, leading to the internationally recognised Cambridge Checkpoint assessments in Grade 6. In the secondary and sixth form phases, students select from an extensive range of IGCSE, AS-level and A-level subjects, enabling them to pursue pathways aligned with their strengths, interests and future aspirations. Arabic is taught across the school and tailored to students’ language levels, while Islamic education is offered to Muslim students in accordance with the Ministry of Education framework.</p> <p>At AGS Muscat, our principal aim is for students to be safe, happy and successful. We measure success in its fullest sense - not only through strong academic outcomes, but through the development of confident, well-rounded young people who are equipped to thrive in the 21st century. We encourage high aspirations from an early age within a creative, disciplined and supportive environment that promotes curiosity, resilience, leadership and teamwork.</p> <p>Learning takes place within a purpose-built campus offering state-of-the-art facilities. These include spacious classrooms, science laboratories, ICT suites, music and art studios, drama rooms, a well-resourced library, outdoor multi-games courts, swimming and splash pools and an indoor multi-purpose sports hall. These facilities support a rich programme of academic, sporting, creative and co-curricular opportunities, both locally and internationally.</p> <p>Our staff comprise highly qualified British-trained and international educators working alongside dedicated locally employed colleagues. Together, they are united by a shared commitment to providing outstanding educational experiences and nurturing the potential of every child.</p> <p>Our ambition is that when students leave AGS Muscat, they do so with the knowledge, skills, values and character to enter the next stage of their journey with confidence - as caring, responsible and effective global citizens, ready to contribute meaningfully to the world around them.</p> <h4>Life in Muscat</h4> <p>Muscat, the capital of Oman, is a vibrant coastal city where modern living blends seamlessly with rich Arabian heritage. Nestled between the Hajar Mountains and the Gulf of Oman, it offers a high quality of life in a safe, welcoming and relaxed environment.</p> <p>Known for its warm hospitality and strong sense of community, Muscat is especially appealing to international teachers and families. Omani culture is respectful and easy going, and the established expatriate community helps newcomers settle quickly and feel at home.</p> <p>With over 300 days of sunshine each year, the climate encourages an active outdoor lifestyle. Residents enjoy pristine beaches, mountain wadis, desert adventures, dolphin watching, and a wide range of fitness and leisure facilities. The city also features modern shopping malls, international restaurants, cultural festivals, art galleries and the renowned Royal Opera House, alongside traditional souqs and cafés.</p> <p>Muscat International Airport offers excellent regional and global connections, making travel convenient. Combining safety, natural beauty, strong infrastructure and a welcoming atmosphere, Muscat is an outstanding destination for educators seeking both professional opportunity and an exceptional lifestyle.</p> <h4>What we are looking for</h4> <p>We are seeking teachers who will contribute positively to our secondary and sixth form phases, and wider school community. The successful candidate will:</p> <ul> <li>Hold consistently high expectations of all students and believe in every student’s potential;</li> <li>Demonstrate excellent knowledge of the Cambridge and Edexcel physics curriculum and assessment requirements;</li> <li>Plan and deliver engaging, inquiry-based lessons that challenge and stretch all students;</li> <li>Embed practical investigation and laboratory safety at the heart of teaching and learning;</li> <li>Use assessment data effectively to inform planning and support student progress;</li> <li>Prepare students confidently for external examinations;</li> <li>Encourage curiosity about the physical world and link physics to real-world applications and emerging technologies;</li> <li>Contribute positively to a collaborative faculty and wider-school community;</li> <li>Be confident and competent in using digital tools to support research, presentations and assessments;</li> <li>Create a purposeful, inclusive and supportive classroom environment that promotes positive behaviour and high standards;</li> <li>Contribute actively to the school’s ‘one team’ ethos through collaboration and professional openness;</li> <li>Work in close partnership with parents to support students’ progress and wellbeing;</li> <li>Demonstrate a commitment to ongoing professional development and reflective practice.</li> </ul> <h4>Application process</h4> <p>Applications should be submitted via the TES online portal. Due to the anticipated level of interest, only shortlisted candidates will be contacted.</p> <p>To meet visa requirements in Oman, applicants must:</p> <ul> <li>Have at least 3 years of teaching experience (UK or international);</li> <li>Hold a recognised bachelor's degree in the relevant subject;</li> <li>Hold a recognised teaching qualification (B.Ed, PGCE, PGDE or equivalent) in the relevant subject;</li> <li>Be fluent and proficient in spoken and written English.</li> </ul> <p>Early applications are encouraged. The school reserves the right to appoint before the closing date if a suitable candidate is identified.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Remarkable people, trusted by clients to design and advance the world</strong></p><br><p>Wood is recruiting for a <strong>Risk-Based Inspection (RBI) Subject Matter Expert (SME)</strong> to join its Projects team focusing on delivering across Oil and Gas projects. Position is based in Oman for duration of one year.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <p>The Risk-Based Inspection (RBI) Subject Matter Expert (SME) will be responsible to support an operating refinery and petrochemical complex. The role will lead and support the transition from API RP 580 to API RP 581 within a GE-APM (Meridiam / Asset Strategy Management) environment, while also providing ongoing technical leadership for the site RBI and asset integrity program.</p><br><br> <p><strong>Designing the future. Transforming the world</strong>&nbsp;</p><br><br> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.&nbsp;<br> &nbsp;</p><br><br> <p><strong>What we can offer</strong>&nbsp;</p><br><br> <ul> <li><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;&nbsp;</li> </ul><br> <ul> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> </ul><br> <ul> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> </ul><br> <ul> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.&nbsp;</li> </ul><br> <ul> <li><strong>Workmen’s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.&nbsp;</li> </ul><br> <ul> <li><strong>Employee Assistance Programme: </strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.&nbsp;</li> </ul><br> <p><strong>Typical responsibilities</strong>&nbsp;&nbsp;</p><br><br> <p><strong>API 580 to API 581 Transition (Operating Plant Context)</strong></p><br> <p>• Lead the transition from API 580 qualitative/semi-quantitative RBI to API 581 quantitative RBI for refinery and petrochemical process units.&nbsp;</p><br> <p>• Implement and validate API 581 RBI models in GE-APM, ensuring they reflect actual operating conditions, materials of construction, and process chemistry.&nbsp;</p><br> <p>• Assess legacy RBI studies and inspection plans for migration suitability and regulatory defensibility.&nbsp;</p><br> <p>• Identify data gaps typical of brownfield assets (corrosion rates, inspection history, damage mechanisms) and define practical remediation plans.&nbsp;</p><br> <p>• Ensure assumptions, damage models, and consequences reflect plant-specific risks, including inventory, toxicity, flammability, and siting.&nbsp;</p><br> <p><strong>RBI Execution &amp; Governance&nbsp;</strong></p><br> <p>• Act as the site RBI technical authority, providing governance, review, and approval of RBI studies and updates.&nbsp;</p><br> <p>• Ensure RBI outputs support:&nbsp;</p><br> <p>&nbsp; &nbsp;o Regulatory compliance&nbsp;</p><br> <p>&nbsp; &nbsp;o Safe operating envelopes&nbsp;</p><br> <p>&nbsp; &nbsp;o Optimized inspection intervals without compromising risk&nbsp;</p><br> <p>• Support audits, regulatory reviews, and internal assurance activities related to RBI and inspection programs.&nbsp;</p><br> <p><strong>Corrosion &amp; Damage Mechanism Management&nbsp;</strong></p><br> <p>• Lead and support corrosion studies and damage mechanism reviews (DMR/DMI) for:&nbsp;</p><br> <p>&nbsp; &nbsp;o Crude, vacuum, hydrotreating, hydrocracking, RFCC, reforming, sulfur recovery, and petrochemical units&nbsp;</p><br> <p>• Validate corrosion rate development and degradation models used in RBI.&nbsp;</p><br> <p>• Interface closely with site corrosion engineers to ensure consistency between corrosion management plans and RBI assumptions.&nbsp;</p><br> <p><strong>Inspection Strategy Development (Operating Units)&nbsp;</strong></p><br> <p>• Develop and optimize risk-based inspection strategies for pressure vessels, piping, tanks, heat exchangers, and associated static equipment.&nbsp;</p><br> <p>• Ensure inspection plans account for:&nbsp;</p><br> <p>&nbsp; o Shutdown windows and turnaround planning&nbsp;</p><br> <p>&nbsp; o Online vs. offline inspection feasibility&nbsp;</p><br> <p>&nbsp; o Access, safety, and operational constraints&nbsp;</p><br> <p>• Support integration of RBI outputs into inspection execution and long-term maintenance plans.&nbsp;</p><br> <p><strong>Bad Actor Identification &amp; Continuous Improvement&nbsp;</strong></p><br> <p>• Identify and analyse bad actors across refinery and petrochemical equipment populations.&nbsp;</p><br> <p>• Investigate recurring damage, unexpected failures, and high-risk equipment trends.&nbsp;</p><br> <p>• Recommend changes to inspection effectiveness, corrosion mitigation, and operating practices where required.&nbsp;</p><br> <p>• Support site initiatives focused on reliability improvement and loss prevention.&nbsp;</p><br> <p><strong>Interface with Operations &amp; Engineering&nbsp;</strong></p><br> <p>• Work closely with Operations, Process Engineering, and Maintenance to ensure RBI reflects real operating realities.&nbsp;</p><br> <p>• Participate in management of change (MOC) reviews, assessing RBI impacts of process, feedstock, or operational changes.&nbsp;</p><br> <p>• Support turnarounds by prioritizing inspection scope based on risk.&nbsp;</p><br> <p><strong>Training &amp; Capability Development&nbsp;</strong></p><br> <p>• Deliver hands-on training and mentoring to site RBI, inspection, and corrosion engineers.&nbsp;</p><br> <p>• Develop and deliver training tailored to an operating plant environment, covering:&nbsp;</p><br> <p>&nbsp; o API RP 580 and API RP 581 application&nbsp;</p><br> <p>&nbsp; o Quantitative RBI interpretation using GE-APM&nbsp;</p><br> <p>&nbsp; o Damage mechanisms specific to refining and petrochemicals&nbsp;</p><br> <p>&nbsp; o Practical use of RBI to support turnaround and inspection planning&nbsp;</p><br> <p>• Build long-term RBI competency and consistency across the site.</p><br><br><br>Qualifications:<br> <p><strong>What makes you remarkable?&nbsp;</strong>&nbsp;</p><br><br> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><br> <p><strong>Experience:</strong></p><br> <ul> <li>BSC degree engineering in mechanical preferred</li> <li>Over 10 years of experiecne in petro-chemical industry</li> </ul><br> </div>