وظائف مدير فرع في سلطنة عمان

<p><h4>Position summary</h4> <p>Run daily reports (number of arrivals, departures), identify any special requests, and check reports for accuracy. Document all trips prior to the start of and at the conclusion of each trip. Transport guests to/from assigned destinations using property vehicle. Park vehicle in designated location when not in use. Inspect property vehicles for damage and cleanliness. Check tire pressure and fluid levels for property vehicle and refuel as necessary. Document all vehicle incidents (i.e., damages, accidents) and provide reports of incidents to manager/supervisor.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications.</p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others.</p> <p>Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> Less than 1-year related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <h4>Required qualification</h4> <p><strong>License or certification:</strong> Commercial Driver's License (CDL).</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Aloft, we aren’t your typical hotel—but we aren’t too cool for school either. We’re here to be our guests’ launching and landing pad. Whether they are taking their dog for a walk and coming back for a drink, wrapping up a day of meetings with coworkers, or they’re in town to see family, friends, or their favorite band, we offer a hub for connection to others and the area around them, with modern design and personality to boot.</p> <p>We’re looking for confident self-expressers who aren’t afraid to draw outside the lines. If you are someone who gets excited about the possibilities to connect with others, then Aloft Hotels is the place for you. In joining Aloft Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<ul><li><p>Operate assigned equipment (excavator, loader, forklift, crane, grader, etc.) safely and efficiently as per site and client requirements.</p><ol><li><p>Conduct pre-start and post-operation inspections of equipment, ensuring safe operating condition and reporting defects immediately.</p></li><li><p>Follow all HSE policies, Golden Rules, and Client Equipment Operation Guidelines during equipment use.</p></li><li><p>Assist in loading, unloading, lifting, and transporting materials in compliance with load handling and lifting standards.</p></li><li><p>Perform basic troubleshooting and first-line maintenance such as checking fuel, oil, hydraulics, cooling systems, brakes, and tires.</p></li><li><p>Adhere to Journey Management and Permit-to-Work (PTW) systems, ensuring operations are authorized and risk assessed.</p></li><li><p>Maintain accurate operation logs and usage records, reporting any incidents, near misses, or unsafe conditions.</p></li><li><p>Ensure equipment is kept clean and in proper working condition at all times.</p></li><li><p>Demonstrate awareness of desert/off-road operation procedures and towing/recovery guidelines in case of stuck or breakdown situations.</p></li><li><p>Follow supervisor’s instructions and complete tasks on time without operational or industrial wastage.</p></li><li><p>Follow the instructions of the supervisor and ensure timely completion of assigned tasks without causing industrial or operational wastage.</p></li><li><p>Any additional responsibilities as instructed by immediate supervisor or management.</p></li></ol></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Valid Oman Driving License (minimum 5 years old)</p></li><li><p>Valid OPAL Lifting Certificate</p></li><li><p>Valid RTITB Competent Card for the relevant equipment category</p></li><li><p>School Education with English writing and reading ability</p></li><li><p>Valid Omani Equipment Operator License for relevant category</p></li><li><p>Experience in O&G industry and knowledge of Defensive Driving will be added advantage</p></li><li><p>Knowledge of basic mechanical troubleshooting of heavy equipment.</p></li><li><p>Familiarity with lifting guidelines, load charts, and equipment safety protocols</p></li></ol><p><br></p>

<p><h4>Company</h4> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Job description</h4> <p>The Senior Officer – Broker Relations is responsible for managing, growing, and strengthening Orient’s broker network across General and Medical insurance lines. The role focuses on developing strategic broker partnerships, driving portfolio expansion, and ensuring seamless coordination between brokers, underwriting, finance, and internal teams. It ensures optimal broker performance through regular reviews, training, renewal management, and strict adherence to compliance and regulatory requirements, while maintaining strong relationships that support business growth and corporate account acquisition.</p> <h4>What you will do (key responsibilities)</h4> <ul> <li>Maintain and expand the broker portfolio on both General and Medical lines of business.</li> <li>Conduct regular and strategic meetings with allocated brokers to develop the portfolio.</li> <li>Handle renewal management and related coordination with both brokers and the underwriting team.</li> <li>Prepare business/performance reports on a monthly basis and share them with the line manager.</li> <li>Conduct portal presentations and training for brokers on various products offered by Orient.</li> <li>Monitor and analyse broker performance on a regular basis.</li> <li>Support the Finance Department on credit control related issues.</li> <li>Maintain excellent rapport with both internal and external stakeholders.</li> <li>Build a strong pipeline of corporate accounts for each quarter.</li> <li>Update and maintain all KYC related documents of the panel broker.</li> <li>Ensure adherence to all regulatory and compliance related processes required by the company.</li> </ul> <h4>Required skills to be successful (qualification)</h4> <ul> <li>Education: Bachelor’s / Master’s / Diploma.</li> <li>Experience: Minimum 5 years in a broker relations role.</li> <li>Certification: Insurance certification will be an added advantage.</li> <li>Excellent communication and people management skills.</li> </ul> <h4>About Orient Insurance PJSC</h4> <p>Orient Insurance Company commenced operations in 1982 as a part of the reputed Al-Futtaim Group and has since recorded a progressively steady growth. The company is counted among the leaders in the UAE insurance market. Orient Insurance Company has a paid-up capital of AED 500 Million which is the highest in the insurance industry in UAE. With head office in Dubai, the company serves its clientele through an extensive branch network in Jebel Ali, Abu Dhabi, Al Ain, Sharjah and Ras Al Khaimah in UAE, Muscat in Sultanate of Oman, Riyadh in Kingdom of Saudi Arabia and Bahrain.</p></p><p></p>

<p><h4>Company</h4> <p>Al Futtaim Private Company LLC</p> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions: automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Job description</h4> <p>The Assistant Vice President – Broker Relations is responsible for managing, growing, and strengthening Orient’s broker network across general and medical insurance lines. The role focuses on developing strategic broker partnerships, driving portfolio expansion, and ensuring seamless coordination between brokers, underwriting, finance, and internal teams. It ensures optimal broker performance through regular reviews, training, renewal management, and strict adherence to compliance and regulatory requirements, while maintaining strong relationships that support business growth and corporate account acquisition.</p> <h4>What you will do (key responsibilities)</h4> <ul> <li>Maintain and expand the broker portfolio, mainly on general insurance and other lines</li> <li>Conduct regular and strategic meetings with allocated brokers to develop the portfolio</li> <li>Handle renewal management and related coordination with both brokers and the underwriting team</li> <li>Prepare business and performance reports on a monthly basis and share them with the line manager</li> <li>Conduct portal presentations and training for brokers on various products offered by Orient</li> <li>Monitor and analyse broker performance on a regular basis</li> <li>Support the finance department on credit control related issues</li> <li>Maintain excellent rapport with both internal and external stakeholders</li> <li>Build a strong pipeline of corporate accounts for each quarter</li> <li>Update and maintain all KYC-related documents of the panel broker</li> <li>Ensure adherence to all regulatory and compliance related processes required by the company</li> </ul> <h4>Required skills to be successful (qualification)</h4> <ul> <li>Education: Bachelor’s, Master’s or Diploma</li> <li>Experience: Minimum 5 years in a broker relations role</li> <li>Certification: Insurance certification will be an added advantage</li> <li>Excellent communication and people management skills</li> </ul> <h4>About Orient Insurance PJSC</h4> <p>Orient Insurance Company commenced operations in 1982 as a part of the reputed Al-Futtaim Group and has since recorded a progressively steady growth. The company is counted among the leaders in the UAE insurance market. Orient Insurance Company has a paid-up capital of AED 500 million which is the highest in the insurance industry in UAE. With head office in Dubai, the company serves its clientele through an extensive branch network in Jebel Ali, Abu Dhabi, Al Ain, Sharjah and Ras Al Khaimah in UAE, Muscat in Sultanate of Oman, Riyadh in Kingdom of Saudi Arabia and Bahrain.</p></p><p></p>

<p><h4>About Al-Futtaim Group</h4> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Job description</h4> <p>The Assistant Vice President – Broker Relations is responsible for managing, growing, and strengthening Orient’s broker network across General and Medical insurance lines. The role focuses on developing strategic broker partnerships, driving portfolio expansion, and ensuring seamless coordination between brokers, underwriting, finance, and internal teams. It ensures optimal broker performance through regular reviews, training, renewal management, and strict adherence to compliance and regulatory requirements, while maintaining strong relationships that support business growth and corporate account acquisition.</p> <h4>What you will do (key responsibilities)</h4> <ul> <li>Maintain and expand the broker portfolio, mainly on General Insurance and other lines</li> <li>Conduct regular and strategic meetings with allocated brokers to develop the portfolio</li> <li>Handle renewal management and related coordination with both brokers and the underwriting team</li> <li>Prepare business/performance reports on a monthly basis and share them with the line manager</li> <li>Conduct portal presentations and training for brokers on various products offered by Orient</li> <li>Monitor and analyse broker performance on a regular basis</li> <li>Support the Finance Department on credit control–related issues</li> <li>Maintain excellent rapport with both internal and external stakeholders</li> <li>Build a strong pipeline of corporate accounts for each quarter</li> <li>Update and maintain all KYC-related documents of the panel broker</li> <li>Ensure adherence to all regulatory and compliance-related processes required by the company</li> </ul> <h4>Required skills to be successful (qualification)</h4> <ul> <li>Education: Bachelor’s / Master’s / Diploma</li> <li>Experience: Minimum 5 years in a broker relations role</li> <li>Certification: Insurance certification will be an added advantage</li> <li>Excellent communication and people-management skills</li> </ul> <h4>About Orient Insurance PJSC</h4> <p>Orient Insurance Company commenced operations in 1982 as a part of the reputed Al-Futtaim Group and has since recorded a progressively steady growth. The company is counted among the leaders in the UAE insurance market. Orient Insurance Company has a paid-up capital of AED 500 Million which is the highest in the insurance industry in UAE. With head office in Dubai, the company serves its clientele through an extensive branch network in Jebel Ali, Abu Dhabi, Al Ain, Sharjah and Ras Al Khaimah in UAE, Muscat in Sultanate of Oman, Riyadh in Kingdom of Saudi Arabia and Bahrain.</p></p><p></p>

<p><h4>Company</h4> <p>Al Futtaim Private Company LLC</p> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions: automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Job description</h4> <p>The Assistant Vice President – Broker Relations is responsible for managing, growing, and strengthening Orient’s broker network across general and medical insurance lines. The role focuses on developing strategic broker partnerships, driving portfolio expansion, and ensuring seamless coordination between brokers, underwriting, finance, and internal teams. It ensures optimal broker performance through regular reviews, training, renewal management, and strict adherence to compliance and regulatory requirements, while maintaining strong relationships that support business growth and corporate account acquisition.</p> <h4>What you will do (key responsibilities)</h4> <ul> <li>Maintain and expand the broker portfolio, mainly on general insurance and other lines</li> <li>Conduct regular and strategic meetings with allocated brokers to develop the portfolio</li> <li>Handle renewal management and related coordination with both brokers and the underwriting team</li> <li>Prepare business and performance reports on a monthly basis and share them with the line manager</li> <li>Conduct portal presentations and training for brokers on various products offered by Orient</li> <li>Monitor and analyse broker performance on a regular basis</li> <li>Support the finance department on credit control related issues</li> <li>Maintain excellent rapport with both internal and external stakeholders</li> <li>Build a strong pipeline of corporate accounts for each quarter</li> <li>Update and maintain all KYC-related documents of the panel broker</li> <li>Ensure adherence to all regulatory and compliance related processes required by the company</li> </ul> <h4>Required skills to be successful (qualification)</h4> <ul> <li>Education: Bachelor’s, Master’s or Diploma</li> <li>Experience: Minimum 5 years in a broker relations role</li> <li>Certification: Insurance certification will be an added advantage</li> <li>Excellent communication and people management skills</li> </ul> <h4>About Orient Insurance PJSC</h4> <p>Orient Insurance Company commenced operations in 1982 as a part of the reputed Al-Futtaim Group and has since recorded a progressively steady growth. The company is counted among the leaders in the UAE insurance market. Orient Insurance Company has a paid-up capital of AED 500 million which is the highest in the insurance industry in UAE. With head office in Dubai, the company serves its clientele through an extensive branch network in Jebel Ali, Abu Dhabi, Al Ain, Sharjah and Ras Al Khaimah in UAE, Muscat in Sultanate of Oman, Riyadh in Kingdom of Saudi Arabia and Bahrain.</p></p><p></p>

<p><h4>About Al-Futtaim Group</h4> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Job description</h4> <p>The Assistant Vice President – Broker Relations is responsible for managing, growing, and strengthening Orient’s broker network across General and Medical insurance lines. The role focuses on developing strategic broker partnerships, driving portfolio expansion, and ensuring seamless coordination between brokers, underwriting, finance, and internal teams. It ensures optimal broker performance through regular reviews, training, renewal management, and strict adherence to compliance and regulatory requirements, while maintaining strong relationships that support business growth and corporate account acquisition.</p> <h4>What you will do (key responsibilities)</h4> <ul> <li>Maintain and expand the broker portfolio, mainly on General Insurance and other lines</li> <li>Conduct regular and strategic meetings with allocated brokers to develop the portfolio</li> <li>Handle renewal management and related coordination with both brokers and the underwriting team</li> <li>Prepare business/performance reports on a monthly basis and share them with the line manager</li> <li>Conduct portal presentations and training for brokers on various products offered by Orient</li> <li>Monitor and analyse broker performance on a regular basis</li> <li>Support the Finance Department on credit control–related issues</li> <li>Maintain excellent rapport with both internal and external stakeholders</li> <li>Build a strong pipeline of corporate accounts for each quarter</li> <li>Update and maintain all KYC-related documents of the panel broker</li> <li>Ensure adherence to all regulatory and compliance-related processes required by the company</li> </ul> <h4>Required skills to be successful (qualification)</h4> <ul> <li>Education: Bachelor’s / Master’s / Diploma</li> <li>Experience: Minimum 5 years in a broker relations role</li> <li>Certification: Insurance certification will be an added advantage</li> <li>Excellent communication and people-management skills</li> </ul> <h4>About Orient Insurance PJSC</h4> <p>Orient Insurance Company commenced operations in 1982 as a part of the reputed Al-Futtaim Group and has since recorded a progressively steady growth. The company is counted among the leaders in the UAE insurance market. Orient Insurance Company has a paid-up capital of AED 500 Million which is the highest in the insurance industry in UAE. With head office in Dubai, the company serves its clientele through an extensive branch network in Jebel Ali, Abu Dhabi, Al Ain, Sharjah and Ras Al Khaimah in UAE, Muscat in Sultanate of Oman, Riyadh in Kingdom of Saudi Arabia and Bahrain.</p></p><p></p>

<p><strong>JOB PURPOSE:</strong> To support the Quality Control Microbiology section in safeguarding the sterility, safety, and quality of pharmaceutical products by performing entry-level microbiological testing, sampling, and environmental monitoring under supervision. The role assists with media preparation, laboratory equipment use, and accurate documentation in compliance with GMP, GLP, approved SOPs, and data integrity requirements, while building the technical foundation and competencies required to progress within the microbiology function.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><p><strong>Microbiological Testing Support</strong></p><ul><li>Prepare culture media, reagents, glassware, and laboratory materials for microbiological analysis as per approved SOPs.</li><li>Perform or assist in routine microbial limit testing, including TAMC, TYMC, and specified pathogen testing, after required training and authorization.</li><li>Support testing of raw materials, packaging materials, in-process samples, finished products, stability samples, and hold-time samples as assigned.</li><li>Assist in growth promotion testing, preservative efficacy testing, and microbiological method-related activities under supervision when required.</li><li>Assist in sterility testing and endotoxin (LAL) testing activities under direct supervision, after required training and authorization.</li><li>Support basic microbial identification activities, including Gram staining and colony observation, under the guidance of senior laboratory staff.</li></ul><p><strong>Sampling, Water Testing and Environmental Monitoring</strong></p><ul><li>Collect, label, handle, and transfer microbiology samples in line with approved sampling and contamination-control procedures.</li><li>Support environmental monitoring in production areas and the microbiology laboratory using settle plates, air sampling, and surface monitoring methods.</li><li>Assist in microbiological testing of water and utility samples and record results accurately for review.</li><li>Support preparation of basic water and environmental monitoring trend summaries as directed by the supervisor.</li></ul><p><strong>Laboratory Equipment and Culture Handling</strong></p><ul><li>Use basic microbiology laboratory equipment such as autoclaves, laminar airflow units, incubators, balances, and refrigerators after training and authorization.</li><li>Perform routine equipment status checks, cleaning, and logbook entries, and report abnormalities or out-of-calibration status immediately.</li><li>Support media incubation, sample incubation, culture handling, and culture maintenance activities under supervision with proper labeling and traceability.</li></ul><p><strong>Documentation and Data Integrity</strong></p><ul><li>Complete worksheets, logbooks, labels, and laboratory records clearly, accurately, and on time in accordance with GDP and data integrity requirements.</li><li>Prepare basic microbiology test reports and submit results for review and approval by the authorized reviewer.</li><li>Maintain microbiology files, reports, and controlled documents in an organized and retrievable manner to support audit readiness.</li></ul><p><strong>Compliance, Safety and Continuous Improvement</strong></p><ul><li>Follow approved SOPs, GMP, GLP, biosafety, hygiene, PPE, and contamination-control requirements at all times.</li><li>Maintain laboratory cleanliness and support proper disposal of biological and laboratory waste according to company procedures.</li><li>Report deviations, abnormal results, contamination concerns, unsafe conditions, or incidents immediately to the supervisor.</li><li>Participate in training and competency development activities to build microbiology testing capability and compliance awareness.</li></ul><p><strong>Other Duties</strong></p><ul><li>Perform any other duties within the scope and level of the position, as assigned by the Line Manager, Supervisor, Department Head, or Management, in line with operational and business requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</strong></p><p><strong>Qualifications</strong></p><ul><li>Bachelor s degree in Microbiology, Biotechnology, Biochemistry, Biology, Pharmaceutical Sciences, or an equivalent relevant field.</li></ul><p><strong>Experience</strong></p><ul><li>Fresh graduate or 0 1 year of exposure to microbiology, pharmaceutical quality control, or laboratory work.</li><li>Academic projects, internship experience, or laboratory training related to microbiological testing, aseptic handling, sample preparation, or GMP/GLP documentation is an advantage.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Pharmaceutical Microbiology Testing</li><li>Aseptic Handling Practices</li><li>Sample Receipt, Labelling &amp; Traceability</li><li>Culture Media Preparation &amp; Sterilization Support</li><li>Environmental Monitoring Support</li><li>Water Testing Support</li><li>Microbial Limit Testing Support</li><li>Sterility &amp; Endotoxin (LAL) Testing Support</li><li>Laboratory Records &amp; Logbook Control</li><li>SOP, GMP &amp; GLP Awareness</li><li>Data Integrity Awareness</li><li>Microbiology Equipment Readiness</li><li>Biosafety &amp; Microbiological Waste Handling</li><li>Basic Microbial Identification &amp; Gram Staining Support</li></ul><p><strong>Behavioural Competencies</strong></p><ul><li>Attention to detail &amp; accuracy</li><li>Quality Focus</li><li>Ownership, accountability &amp; initiative</li><li>Willingness to Learn</li><li>Collaboration &amp; teamwork</li><li>Clear communication</li><li>Planning, prioritization &amp; time management</li><li>Integrity, confidentiality &amp; ethics</li><li>Safety Awareness</li></ul>

<p>Carry out aircraft maintenance, servicing, inspection, and related activities in accordance with approved maintenance data, company procedures, and instructions from the Licensed Aircraft Engineer. Assist Licensed Aircraft Engineers with aircraft arrival and departure inspections, transit checks, walk-around inspections, defect troubleshooting, rectification, and other approved maintenance activities. Operate and utilize specialized aircraft maintenance equipment, test equipment, ground support equipment, and tooling effectively and safely, as required for inspection, testing, servicing, component replacement, and maintenance activities. Ensure all tools, equipment, and ground support equipment are operated correctly and safely, and maintained in good working and serviceable condition. Maintain proper control and accountability of all tools and equipment used during maintenance activities, ensuring they are serviceable, properly calibrated where applicable, and within the required inspection and certification validity. Immediately report any safety hazard, maintenance error, incident, accident, aircraft damage, or other reportable occurrence to the responsible Licensed Aircraft Engineer or supervisor, and complete the required occurrence or incident reports. Ensure adequate pre-work preparation is completed, including the availability of required tools, equipment, materials, and maintenance documentation, to support safe and efficient work execution. Comply with all applicable Airport Authority rules, company procedures, policies, regulations, and operational requirements. Record all maintenance delays, incidents, accidents, and other relevant occurrences on the prescribed forms and submit them to the Engineer u2013 Aircraft Line Maintenance for appropriate action. Attend and successfully complete all required recurrent, continuation, competency, safety, and technical training in accordance with company requirements and applicable regulatory standards. Assist in maintaining the cleanliness, security, safety, and serviceability of aircraft maintenance areas, workshops, equipment, tools, and maintenance vehicles. Ensure full compliance with Airport Authority requirements, company procedures and regulations, and Health, Safety and Environment (HSE) policies to maintain a safe working environment throughout the assigned shift. Perform any other maintenance-related duties and responsibilities assigned by the immediate supervisor or management, within the scope of the position, applicable procedures, and regulatory requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Aeronautical Engineering or completion of basic training Part-147. 2 years apprenticeship in airline engineering base or line maintenance area.</p>

<p>FUNCTIONS: Installing, maintaining, and repairing ventilation and air conditioning systems and equipment. Identifying maintenance risks on equipment. Diagnosing electrical and mechanical faults for HVAC systems. Cleaning, adjusting, and repairing systems, and performing warranty services. Performing emergency repairs promptly and efficiently. Providing technical direction and on-the-job training. Keeping daily logs and records of all maintenance functions. Ensuring compliance with appliance standards and with Occupational Health and Safety Act. Complying with service standards, work instructions and requirements. Installation of split AC and Window AC. Assisting during the installation of package HVAC. Preventive maintenance of all type of air conditioning. Corrective maintenance and troubleshooting of split AC and package AC. Basic electrical and mechanical troubleshooting and installation skills related to HVAC. Repairs of leakages in condenser coils by copper bracing/welding.</p><p>RESPONSIBILITIES: Working under Maintenance Department and reports directly to the Foreman/Supervisor. Performs all duties according to Company Policies and Procedures Availability to work outside of standard hours, including nights, weekends, to respond immediately to emergency or specific requests from the supervisor. Adheres to company's Quality, Health &amp; Safety and Environment policies and procedures. Adheres to company's HR Policies and Procedures. Supporting other departments during emergency situations as instructed by line manager.</p><p>SKILLS PROFILE: Critical Thinking skills. Trouble shooting of AC related issues. Basic electrical skills. Team Player. Communication skills. Coordination skills. Familiar to tools (vacuum pump, multimeter, bracing etc).</p><p><strong>Desired Candidate Profile</strong></p><h2>ACADEMIC BACKGROUND:</h2><p>Industrial Technical Course in Air Conditioning or similar. Diploma holder.</p><h2>PROFESSIONAL EXPERIENCE:</h2><p>3 years experience in various AC maintenance activities, installation, and repair activities, demonstrating familiarity with commercial/industrial grade system.</p><h2>KNOWLEDGE OF:</h2><p>Comprehensive knowledge of professional methods and best practices for the maintenance of HVAC/R systems, tools, machinery, and equipment. Knowledge of split AC, ducted AC, cassette type AC installation and maintenance. Knowledge of the refrigeration cycle, charging, leak detection, and regulatory requirements. Skills in understanding of electrical troubleshooting in HVAC.</p>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities:</strong></p><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision.</li><li>Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li><strong>Wells custodianship</strong></li><li>Receiving all handovers from WS (hoist), sending handovers to construction for hook up.</li><li>Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity.</li><li>In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points.</li><li>Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li><strong>Other off plot activities:</strong></li><li>Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning.</li><li>Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations.</li><li>Implement and maintain HSE policies, procedures, and best practices.</li><li>Conduct regular safety audits, risk assessments, and emergency drills.</li><li>Promote safety awareness and lead incident investigations, providing corrective actions.</li><li>Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports).</li><li>Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Upstream</p><p>External: Contractors, Vendors &amp; Suppliers</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelors, 5-7 years</li><li>Diploma, &gt;7 years</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform Surface Operations</li><li>Off Plot Field Production Operation</li><li>Water Treatment</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Role Objective:<br></p><br><p><span>The Airport Services Supervisor oversees and coordinates the activities of Airport Services agents and appointed Ground Handler to ensure consistent delivery of high-quality service to Salamair passengers in respect of check-in, boarding, special services, ramp operations and baggage services. Ensuring the consistent application of the company’s commercial and safety standards and procedures, the ASVR provides support, leadership and coaching to the front-line staff engaged in ensuring the smooth and efficient processing of all passengers.</span><br></p><br><p><span>Duties and Responsibilities:</span><br></p><br><ul><li><span><span>Organize allocation of agents to check-in, Departures/Transfer, Ramp or Arrivals on a rotating basis and provide briefings on a shift by shift basis;</span><br></span></li><li><span><span>Set up check-in area and ensure correct allocation of desks, manpower and other resources, monitoring activities of OV and Ground Handling Agents (GHA);</span><br></span></li><li><span><span>Monitor passenger flow and queue times providing assistance and adjusting desk allocation as required, including liaison with immigration, Security and authority’s terminal management;</span><br></span></li><li><span><span>Ensure proper enforcement of flight opening/closure times, baggage policies, Credit Checks and documentation requirements;</span><br></span></li><li><span><span>Provide assistance and information to passengers and stakeholders as necessary;</span><br></span></li><li><span><span>Liaise with OCC and GHA and organize staff to ensure timely commencement and close out of boarding process;</span><br></span></li><li><span><span>Assist passenger progress through security, immigration and transfer areas and assist with baggage and flight connections;</span><br></span></li><li><span><span>Ensure safe passenger embarkation and disembarkation processes and monitor turn-round handling and baggage handling activities within company/regulatory safety and security guidelines;</span><br></span></li><li><span><span>Assist passenger arrivals and baggage reclaim process and offer any assistance as necessary;</span><br></span></li><li><span><span>Liaise with all stakeholders and assist passengers in case of delays or disruption;</span><br></span></li><li><span><span>Monitor, investigate and report any irregularities and identify &amp; implement solutions;</span><br></span></li><li><span><span>Coach and mentor junior staff appropriately – leading by example.</span><br></span></li><li><span><span>Responsible for identifying safety risks to support safety objectives and maintaining security standards in accordance with the guidelines outlined in current version of <i><span>AOSP Chapter 3.4 and 14.13.</span></i></span><br></span></li><li><span><span>Any other duties that may be assigned by the line manager.</span><br></span></li></ul><br><span>Requirements</span><ul><li><span><span>The Airport Services Supervisor should have the good knowledge of aviation related of Ground Services functions and Operations.</span><br></span></li><li><span><span>Educational Qualifications &amp; Experience – A Diploma/Graduate in any discipline from any recognized University or minimum 03 years’ experience in Ground Services related functions. </span></span><br></li><li><span><span>Established team player and team builder with proficiency in written, verbal communication skill with basic computer knowledge.</span><br></span></li></ul><br> </div>

<p>Responsible for assisting in the safe and efficient operation of the plant to support production targets. Perform routine operational tasks under supervision, ensuring safety and procedural standards compliance. Communicate effectively with team members and supervisors to maintain reliable and trouble-free operations.</p><p>Principle Duties &amp; Responsibilities</p><ul><li>Assist in operating and monitoring process equipment ensuring compliance with safety standards</li><li>Monitor and record equipment operational parameters in the field, reporting abnormalities to the Control Room Operator (CRO) or Supervisors</li><li>Support system start-ups and shutdowns as directed by supervisor</li><li>Assist in pressurizing and depressurizing equipment and pipelines when required</li><li>Regularly check pressure, delta pressure, temperature, and level gauges, reporting irregularities to the CRO</li><li>Follow instructions from the CRO or Supervisors to maintain stable plant operations and support production optimization</li><li>Adhere to QHSE standards and procedures (e.g., LOTO, PTW, TBT, JHA) and ensure proper documentation of tasks</li><li>Participate in training and reviews of operational procedures, offering basic feedback for improvement</li><li>Conduct basic operational and maintenance checks (daily, weekly, monthly) under supervision</li><li>Assist in preparing equipment for maintenance, including isolation, draining, and decontamination</li><li>Ensure accurate and timely handover of information to the next shift team</li><li>Identify and report unsafe conditions to supervisors.</li><li>Safely handle and top up chemicals, lubricants, and coolants, collecting samples as directed</li><li>Maintain housekeeping and cleanliness standards during and after tasks</li><li>Comply with Emergency Response Team (ERT) roles and responsibilities as assigned</li><li>Comply with all Enerflex HR, Quality, HSE, and all the Company policies, procedures, processes, work instructions and guidelines</li><li>Perform all other duties as assigned by Supervisor / Manager</li></ul><p>Summary</p><p>Principle Responsibilities and Duties</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum a technical degree in Industrial Processes, Chemical, Petroleum or equivalent</p><p>0-2 years of experience in a similar role within the Oil &amp; Gas sector</p><p>Familiar with plant equipment, processes, and all ongoing activities.</p><p>General troubleshooting, problem-solving, information analysis, and interpersonal skills</p><p>General understanding of Plant PFDs, P &amp; IDs, drawings, Cause &amp; Effect matrix, and Fire &amp; Gas detection system philosophy</p><p>Basic understanding of Maintenance Management System (Work orders, Preventive/Corrective/and Predictive Maintenance) methodology</p><p>Computer proficiency is mandatory. Good working knowledge of typical Microsoft suite of software is required.</p><p>Good interpersonal and communication skills. Good English command, written and spoken. Arabic is an asset.</p><p>Motivated, team player, able to work within a diverse cultural environment, willing to learn</p>

<p>Role: Construction / Site Supervisor</p><p>Industry Type: Industrial Equipment / Machinery (Construction Equipment)</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: Graduation Not Required</p><p><strong>Desired Candidate Profile</strong></p><p>Relevant technical experience Ability to follow safety and work procedures Availability for immediate departure Education: Diploma/ ITI Basic English &amp; Good Hindi communication required</p>

<p>CHEMICAL WAREHOUSE SUPERVISOR</p><p>Diploma or Bachelor's degree in Chemical Engineering, Chemistry, Logistics, Warehouse Management, or a related discipline.</p><p>Relevant experience in chemical manufacturing, chemical distribution, blending, or hazardous-material</p><p>warehousing.</p><p>Minimum 5-8 years of warehouse experience, preferably with supervisory responsibility.</p><p>➤ Experience handling drums, IBCs, bulk chemicals, and chemical tankers.</p><p>➤ Forklift/material-handling knowledge is essential.</p><p>Racking System</p><p>Chemical compatibility study.</p>

<p> <strong> <u>HVAC Supervisor: </u> </strong> </p> <p>Three-year Diploma in Mechanical Engineering / Air-conditioning and Refrigeration Engineering with at least 7 years experience in operation, maintenance and overhauling of screw chillers, Cold rooms, refrigerators, freezers, split/window/package A/C units and chilled water systems etc. Of the 5 years experience, at least 5 years shall be in a similar supervisory position.</p> <p>Salary Based on experience and interview Assessment</p> <p> </p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Role Objective:</b><br></p><br><p>To perform and support aircraft maintenance activities under the direction and supervision of a Licensed Aircraft Engineer, including aircraft servicing, inspections, troubleshooting, defect rectification, component replacement, and other approved maintenance tasks. Ensure all maintenance activities are carried out safely and efficiently in accordance with approved maintenance data, company procedures, and applicable regulatory requirements, contributing to the continued airworthiness, operational reliability, and timely turnaround of the aircraft.<br></p><br><p><b>Duties and Responsibilities:</b><br></p><br><p>Carry out aircraft maintenance, servicing, inspection, and related activities in accordance with approved maintenance data, company procedures, and instructions from the Licensed Aircraft Engineer.<br></p><br><p>Assist Licensed Aircraft Engineers with aircraft arrival and departure inspections, transit checks, walk-around inspections, defect troubleshooting, rectification, and other approved maintenance activities.<br></p><br><p>Operate and utilize specialized aircraft maintenance equipment, test equipment, ground support equipment, and tooling effectively and safely, as required for inspection, testing, servicing, component replacement, and maintenance activities.<br></p><br><p>Ensure all tools, equipment, and ground support equipment are operated correctly and safely, and maintained in good working and serviceable condition.<br></p><br><p>Maintain proper control and accountability of all tools and equipment used during maintenance activities, ensuring they are serviceable, properly calibrated where applicable, and within the required inspection and certification validity.<br></p><br><p>&nbsp;Immediately report any safety hazard, maintenance error, incident, accident, aircraft damage, or other reportable occurrence to the responsible Licensed Aircraft Engineer or supervisor, and complete the required occurrence or incident reports.<br></p><br><p>Ensure adequate pre-work preparation is completed, including the availability of required tools, equipment, materials, and maintenance documentation, to support safe and efficient work execution.<br></p><br><p>Comply with all applicable Airport Authority rules, company procedures, policies, regulations, and operational requirements.<br></p><br><p>Record all maintenance delays, incidents, accidents, and other relevant occurrences on the prescribed forms and submit them to the Engineer – Aircraft Line Maintenance for appropriate action.<br></p><br><p>Attend and successfully complete all required recurrent, continuation, competency, safety, and technical training in accordance with company requirements and applicable regulatory standards.<br></p><br><p>Assist in maintaining the cleanliness, security, safety, and serviceability of aircraft maintenance areas, workshops, equipment, tools, and maintenance vehicles.<br></p><br><p>Ensure full compliance with Airport Authority requirements, company procedures and regulations, and Health, Safety and Environment (HSE) policies to maintain a safe working environment throughout the assigned shift.<br></p><br><p>Perform any other maintenance-related duties and responsibilities assigned by the immediate supervisor or management, within the scope of the position, applicable procedures, and regulatory requirements.<br></p><br><br><span>Requirements</span><p>Education &amp; Experience:<br></p><br>Diploma in Aeronautical Engineering or completion of basic training Part-147.<br><br>2 years apprenticeship in airline engineering base or line maintenance area.<br><br><br> </div>

<p>MINIMUM QUALIFICATIONS / SKILLS 1. 2 years experience with equipment similar to that used on the rig being assigned to, with a minimum of 12 months experience with drive systems, if the rig is so equipped, is preferred. 2. Experience with USCG regulations on the electrical systems and wiring requirements if the assigned rig is a MODU classed unit. 3. Ability to wear respiratory protective devices. LICENSURE/CERTIFICATE REQUIRED: 1. STOP for Supervisor Program</p>