وظائف مهندسين مدنى في سلطنة عمان

<p><strong>Position Summary</strong></p><p>The Site Engineer will be responsible for the day-to-day execution, management, and supervision of potable water pipeline construction activities.&nbsp;</p><p>The successful candidate must demonstrate the ability to operate independently on-site, managing field resources, tracking daily progress, and overcoming construction challenges with minimal supervision.&nbsp;</p><p>This role requires seamless communication and reporting to the Project Manager to ensure project deliverables are achieved safely, on schedule, within scope, and in strict compliance with engineering specifications.</p><p><strong>Key Responsibilities</strong></p><p>Site Management &amp; Execution</p><ul><li>Supervise and drive the daily construction activities of potable water pipeline installations, including excavation, pipe laying, jointing, thrust block construction, backfilling, and compaction.</li><li>Manage onsite sub-contractors, laborers, plant machinery, and material resources individually to ensure efficient field workflows.</li><li>Conduct field inspections to verify that all work aligns with approved engineering drawings, method statements, and structural parameters.</li><li>Direct pressure testing, hydrotesting, flushing, and disinfection protocols for newly laid potable water pipelines before commissioning.</li></ul><p>Reporting &amp; Project Coordination</p><ul><li>Coordinate closely with the Project Manager to track project timelines, resource allocations, and budget milestones.</li><li>Generate and submit precise daily, weekly, and monthly site progress reports, documenting work completed, delays, equipment utilization, and labor hours.</li><li>Act as the primary onsite point of contact, resolving field issues independently while escalating complex variations or delays to the Project Manager immediately.</li><li>Liaise with client representatives, consultants, and local authorities during routine site inspections and quality sign-offs.</li></ul><p>Quality Assurance &amp; Safety Compliance</p><ul><li>Maintain strict quality control metrics over all incoming pipeline materials, ensuring proper handling and storage of pipes, valves, and fittings.</li><li>Implement and enforce all company Health, Safety, and Environment (HSE) policies onsite, targeting zero incidents.</li><li>Ensure accurate site surveying, alignment verification, and the preservation of levels as dictated by the design specifications.</li></ul><p><strong>Requirements &amp; Qualifications</strong></p><p>Experience &amp; Education</p><ul><li><strong>Minimum Experience:</strong> 5+ years of verified site engineering experience dedicated to pipeline infrastructure works, specifically focused on potable water transmission and distribution networks.</li><li><strong>Education:</strong> Bachelor’s Degree or Diploma in Civil Engineering, Mechanical Engineering, or a closely related construction discipline.</li><li><strong>Technical Knowledge:</strong> Deep familiarity with water pipeline materials (such as DI, HDPE, PVC, and Carbon Steel), jointing techniques, valve chambers, testing mechanisms, and standard utility standards.</li></ul><p>Key Competencies</p><ul><li><strong>Autonomy:</strong> Proven ability to manage a construction site individually, handle rapid decision-making under pressure, and drive productivity independently.</li><li><strong>Software Proficiency:</strong> Basic proficiency in AutoCAD for checking layout designs and MS Office (Excel, Word) for administrative reporting.</li><li><strong>Communication:</strong> Strong interpersonal and report-writing skills to build working relationships across sub-contractors and project executives.</li></ul><p>Preferred Assets (Added Advantage)</p><ul><li><strong>Driving License:</strong> Possession of a valid, active driving license is highly preferred and considered a significant advantage for field mobility across site segments.</li></ul>

<p>Oversee and manage all activities related to electrical systems, equipment, and processes within approved budget as well as provide technical leadership contribution and excellence in the field of electrical engineering and in compliance with the design code, HSSE level of integrity and reliability and legal requirements to ensure the safety and integrity of the electrical systems of OLNG.</p><p><strong>Managerial Responsibilities</strong></p><p>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</p><p>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</p><p>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</p><p>Conduct regular check ins with team members for alignment on expectations and performance</p><p>Lead the electrical engineering team and ensure effective and efficient utilization of resources to achieve departmental objectives</p><p>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</p><p>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</p><p><strong>Electrical Engineering Strategic Planning and Budgeting:</strong></p><p>Develop departmental strategies in alignment with the corporate strategy and ensure the delivery of business results is aligned to the corporate objectives</p><p>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</p><p>Develop optimum Capex &amp; Opex budget for all electrical activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available</p><p><strong>Electrical Engineering Project &amp; Operations:</strong></p><p>Lead electrical engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</p><p>Manage electrical project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</p><p>Develop and manage the delivery of technical excellence within all the electrical engineering activities to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Recommend best practices related to operation and maintenance of the electrical systems and equipment, oversee the maintenance, and ensure perennial availability of electrical spare parts</p><p>Conduct regular electrical spare parts reviews and follow up on action items that ensure availability of required spares to maintain complex electrical equipment</p><p>Propose and initiate new contracts for major electrical maintenance &amp; projects and carry out technical evaluation</p><p>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</p><p>Direct the team in technical studies and failure investigations, electrical SAFOP and all related elements, with base knowledge in process and instrument diagram reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</p><p>Own the electrical engineering as deputy subject matter expert (SME) and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</p><p>Control the additions to the high voltage network imposed by the complex expansion</p><p><strong>Quality and Assurance Management:</strong></p><p>Ensure technical quality of all the electrical activities within the department</p><p>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</p><p>Liaise with the area managers within maintenance and turnarounds to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Ensure that all the electrical discipline procedures are in accordance with the ISO certified quality assurance system</p><p>Oversee departmental activities and ensure HSSE and regulatory compliance to provide leadership support to achieve goal zero for the OLNG organisation</p><p><strong>Management of Electrical Engineering Contracts:</strong></p><p>Support EPE in strategizing major electrical engineering contracts from inception, contract strategy, technical evaluation, contractor evaluation to selection</p><p>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</p><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><p>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</p><p>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities in a manner that positively contributes to the core values and the policies of OLNG.</p><p>Act as the Technical Authority TA3 for asset and projects</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10 years in chemical or oil and gas industry</li><li>Omani Nationals Preferred</li><li>5 years of experience of troubleshooting, analysis of electrical networks and equipment which includes generation, distribution, and transmissions systems up to 33kV levels and HV motors and associated controls such as power management system, SCADA (System Control and Data Acquisition), Load Shedding, VSDS controllers and cryogenic equipment</li><li>Knowledge of hazardous area classification, DEP, &amp; IEC standards</li><li>Technical Authority Level3</li><li>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</li></ul>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<p><br></p> <p> <strong>Experience:</strong> </p> <ul> <li>BSc Engineering in Telecoms, Computing, Engineering, Science or related fields.</li> <li>Minimum of 15 years in FEED/Engineering Experience and 10 years relevant experience in Oil &amp; Gas.</li> <li>Proven project management and leadership skills, and good knowledge of business analysis.</li> <li>Excellent in planning, communication and presentation skills, and is expert in project quality management</li> <li>Excellent interpersonal, written &amp; oral communication skills with the ability to persuade, lead teams &amp; build trust at all levels in the organisation.</li> <li>Proven track record in customer relationship management.</li> <li>Comprehensive knowledge of relevant project life-cycles.</li> <li>A sound knowledge in Exploration &amp; Production Engineering business activities is required or in depth knowledge within a respective portfolio discipline.</li> <li>Demonstrates ability to proactively seek responsibility and shows systematic approach to problem solving</li> <li>Possesses an in-depth understanding of IM&amp;T practices, principles, and information and communications technology.</li> </ul> <p>The Principal Process Engineer will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time</p> <p> <strong>Designing the future. Transforming the world</strong> </p> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> <br> <strong>What we can offer</strong> </p> <ul> <li> <strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas and emerging energy sectors </li> <li> <strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li> <strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li> <strong>Medical Insurance: </strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li> <strong>Workmen s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li> <strong>Employee Assistance Programme: </strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li> </ul> <p> <strong>Typical responsibilities</strong> </p> <ul> <li> Study, review and identify the scope from the input document of previous phase of ORP. </li> <li> Develop Terms of Reference (TOR) for each project under area of responsibility and in consultation with relevant IM&amp;T Portfolio Analysts. </li> <li> Develop CTR estimate and provide inputs to project execution plan/schedule for projects as necessary. </li> <li> Create and manage Project MTO of Telecom in SAP. </li> <li> Plan and Execute procurement activities as per the agreed implementation strategy and in line with C&amp;P guidelines. </li> <li> Review the key project deliverables and liase with IM&amp;T team ensuring the FEED Office standards compliance. </li> <li> Supervise and ensure alignment of Quality System requirement for all projects executed in FEED Office. </li> <li> Actively involve in CI and Lean Management with regards to FEED Office proecdures and Project management. </li> <li> Participate in quality audits and own the responsibility of resolving any findings / NCR / Improvements raised for Telecoms. </li> <li> Execute allocated projects in line with project plan, actively participating in all phases of the project. Identify, assess and manage risks to the success of the project. </li> <li> Maintain, Review and Monitor the project Cost Performance Index and Schedule Performance Index for the projects under execution. </li> <li> Adopt and implement Project Management best practices in line with directives from FEED Office, IM&amp;T project office and corporate guidelines. </li> <li> Conduct and attend relevant workshops and framing sessions related to project execution in accordance with project schedule. </li> <li> Provide input to project Value Assurance Reviews during major stage gates of the key projects. </li> <li> Manage contractors as per the corporate guidelines stipulated under IMT-502 List. </li> <li> Manage internal resources for the implementation of FEED Office projects and activities associated with FEED Office standards and procedures. </li> <li> Manage and execute FEED Office projects. Ensure completion within the agreed time scale while maintaining Company standards. </li> <li> Ensure project handover and demonstrate the handover as per FEED Office standards. </li> <li> Complete technical closeouts as per the FEED office standards. </li> </ul>

<p>We are looking for a skilled Network Engineer to join our team in Muscat. Key Skills: Fortinet (FortiGate Firewall) administration and troubleshooting Email Security solutions (Microsoft Defender, FortiMail, Proofpoint, Mimecast, or similar) Routing &amp; Switching (Cisco/Fortinet) VPN, NAT, IPS/IDS, SD-WAN Network monitoring and performance optimization Troubleshooting LAN/WAN and network security incidents</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have hands-on experience in enterprise networking, network security, and email security solutions.</p><p>Requirements:</p><ul><li>410 years of relevant experience</li><li>Strong knowledge of network security best practices</li><li>Relevant certifications (NSE, CCNA/CCNP, or equivalent) are an advantage</li><li>Immediate joiners will be preferred</li></ul>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<p>We are looking for a motivated and enthusiastic Electrical Engineer (Renewable Energy) to join our team.</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have:<br>1- A strong interest in sustainable energy technologies, particularly Solar PV, Wind Energy, and other renewable energy systems.<br>2-The ability to multitask and handle both site and office work.<br>3- Excellent technical report writing and communication skills.</p>

<p>MEP ENGINEER Qualification -BE Electrical Experience - T otal 10 years with minimum 5 year GCC experience as an MEP Engineer GCC driving license -Preferred Leave &amp; Other entitlements -As per Omani Labour Law Age - Below 45 years Salary &amp; Benefits -Salary will be discussed and finalized based on Qualification, experience, skills and Interview assessment by client. In addition of salary company will provide free accommodation , Transportation, Medical GENERAL INFORMATION REQUIRED Please send all documents in following sequence of attachment. Kindly accord priority. Document Required to be sent with CV:- Updated CV Academic Certificate of Graduation and above Achievements/Awards during career growth/Licence (if any)/Permit copy/Any other approvals copy as required for job. Experience certificates Passport copy clear (Please attach your Passport last Visa cancelled page if you were present earlier with any employer of current hiring country) Recent Photograph Mobile number Your current Location If already in Gulf, how soon you can join Current Salary &amp; Salary Expectation In case you need any clarification pls send message on WhatsApp PHONE_NUMBER .</p><p><strong>Desired Candidate Profile</strong></p><p>BE Electrical</p> <p>Total 10 years with minimum 5 year GCC experience as an MEP Engineer</p> <p>GCC driving license -Preferred</p> <p>Age - Below 45 years</p>

<div> <div> <p> <b>Job<br>Description Faculty<br>Administrator</b> </p> <p> <b>Reporting to</b>: Dean/Director of Academic Faculty</p> <p> <b>Summary:</b> </p> <p>The Faculty<br>Administrator at the Academic Faculties in Muscat University is<br>expected to perform administrative tasks to support the academic faculties in<br>planning, coordinating, and implementing activities. The<br>position requires collaboration with staff, students, and the industry, and responding to work requests from other<br>departments in a timely and accurate manner. </p> <p> <b>Duties<br>&amp; Responsibilities </b> </p> <p>1. <br>Prepare, maintain, and distribute meeting materials,<br>business presentations, and other department files, and ensure quality<br>documentation is available.</p> <p>2. <br>Ensure that the website and the quality management system<br>portal of the department are up to date.</p> <p>3. <br>Support the organisation of field trips and other faculty-related<br>special events like job fairs, promotion events, information sessions, student<br>inductions, etc.</p> <p>4. <br>Assist in budget preparation, procurement, and other<br>expense management activities.</p> <p>5. <br>Perform data collection for quality assurance and other<br>external bodies.</p> <p>6. Provide first-level support in advising by providing<br>required documents, guidelines, and setting appointments between advisers and<br>students at risk.</p> <p>7. Manage<br>day-to-day administrative operations of the faculty, including documentation,<br>scheduling, and internal communication.</p> <p>8. Assist<br>the Dean, Assistant Dean, and academic staff in coordinating teaching<br>schedules, examinations, meetings, and faculty activities.</p> <p>9. Act<br>as a point of contact for students, faculty members, and external stakeholders<br>regarding administrative matters.</p> <p>10. Maintain<br>accurate records of faculty operational plan, activities, reports,<br>correspondence, and academic documentation.</p> <p>11. Organize<br>faculty meetings, workshops, seminars, and academic events, including<br>preparation of agendas and minutes.</p> <p>12. Support<br>the preparation of reports and ensure compliance with university policies,<br>accreditation requirements, and regulatory bodies.</p> <p>13. Coordinate<br>with other university departments such as HR, Registry, Finance, and IT to<br>facilitate faculty operations.</p> <p> <b>Qualifications for Department<br>Coordinator</b> </p> <ul> <li>Bachelor s degree in a<br>related field.</li> <li>Works independently and with minimum supervision</li> <li>Trustworthy and can handle confidential<br>documents </li> <li>Excellent communication skills in English and<br>Arabic</li> <li>Proficient in the use of Microsoft Office. </li> </ul> <p> <b>Skills and Competencies</b> </p> <ul> <li>Excellent organizational, administrative, and<br> time-management skills.</li> <li>Strong communication and interpersonal skills in<br> English and Arabic.</li> <li>Proficient in Microsoft Office applications.</li> <li>Strong attention to detail and accuracy in<br> documentation and record keeping.</li> <li>Ability to work independently and manage multiple<br> priorities.</li> <li>Strong coordination and event-management skills.</li> <li>Ability to handle confidential information with<br> integrity and discretion.</li> <li>Good data management, reporting, and<br> problem-solving skills.</li> <li>Ability to work effectively with students, staff,<br> university departments, and external stakeholders.</li> <li>Professional, proactive, reliable, and<br> service-oriented.</li> </ul> <p> </p> <p> </p> </div> <p> <br> </p> </div> <div> <div></div></div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Drawings &amp; Designs is responsible for the development, management, control, and continuous improvement of all engineering drawings, technical documentation, plant design records, and engineering change processes across the mining and processing operations. The role ensures that all engineering drawings, as-built documentation, layouts, schematics, and design data are accurate, current, compliant with applicable engineering standards, and readily available to support safe, reliable, and efficient operation of plant assets. The position provides technical leadership for engineering design activities, drawing management systems, plant modifications, engineering change management (MOC), document control coordination, multidisciplinary design reviews, and digital engineering initiatives. The role supports maintenance, operations, projects, shutdowns, and capital development activities by ensuring engineering documentation integrity and effective design governance throughout the asset lifecycle.</p> <p> </p> <p><b>Detailed Description </b></p> <p>DRAWINGS AND DESIGN MANAGEMENT</p> <p>Develop, review, and manage engineering drawings including mechanical, structural, piping, electrical, instrumentation, civil, architectural, and process drawings.</p> <p>Ensure all engineering drawings are maintained accurately and updated to reflect plant modifications and as-built conditions.</p> <p>Establish and maintain engineering drawing standards, drafting procedures, templates, and design guidelines.</p> <p>Ensure consistency and compliance with applicable international standards, company requirements, and OEM specifications.</p> <p>Coordinate multidisciplinary drawing reviews and approvals prior to implementation of modifications.</p> <p>Maintain master drawing registers and document history records.</p> <p>Ensure obsolete drawings are withdrawn and controlled in accordance with document management procedures.</p> <p>Support digitalization initiatives involving engineering document management and drawing systems.</p> <p>ENGINEERING DESIGN AND MODIFICATIONS</p> <p>Lead and coordinate engineering design activities for plant upgrades, asset improvement initiatives, debottlenecking projects, and operational modifications.</p> <p>Prepare conceptual, basic, and detailed engineering designs.</p> <p>Develop engineering calculations, technical specifications, scopes of work, and equipment layouts.</p> <p>Conduct feasibility studies and technical evaluations for proposed modifications.</p> <p>Ensure designs achieve required safety, operability, maintainability, reliability, and cost objectives.</p> <p>Coordinate engineering deliverables with Operations, Maintenance, Reliability, Projects, and external consultants.</p> <p>Participate in design verification and interdisciplinary design reviews.</p> <p>Ensure engineering designs consider lifecycle cost optimization and long-term asset sustainability.</p> <p>MANAGEMENT OF CHANGE (MOC)</p> <p>Manage engineering aspects of the Management of Change process.</p> <p>Review and evaluate proposed modifications and technical changes.</p> <p>Ensure all design changes are supported by appropriate engineering documentation and risk assessments.</p> <p>Coordinate updating of drawings, technical documents, procedures, and asset records following approved changes.</p> <p>Verify implementation of approved modifications and completion of as-built documentation.</p> <p>Ensure engineering changes comply with statutory, safety, environmental, and operational requirements.</p> <p>ENGINEERING DOCUMENT CONTROL</p> <p>Maintain engineering document control systems and technical databases.</p> <p>Ensure proper filing, numbering, distribution, revision control, and archiving engineering documents.</p> <p>Manage controlled copies of plant drawings and technical records.</p> <p>Coordinate document reviews and approvals with engineering disciplines and stakeholders.</p> <p>Ensure document accessibility for maintenance, operations, projects, and regulatory requirements.</p> <p>Support audits by ensuring engineering records and documentation are accurate and available.</p> <p>PLANT LAYOUTS AND AS-BUILT MANAGEMENT</p> <p>Develop and maintain plant general arrangement drawings, equipment layouts, utility plans, and site infrastructure drawings.</p> <p>Coordinate field verification activities to ensure drawing accuracy.</p> <p>Conduct plant surveys and document existing conditions where required.</p> <p>Ensure timely preparation and updating of as-built drawings following project completion.</p> <p>Establish processes for maintaining plant configuration integrity.</p> <p>Support operational and maintenance teams through provision of accurate plant data and layouts.</p> <p>PROJECTS AND CAPITAL DEVELOPMENT SUPPORT</p> <p>Support capital projects through engineering design development and drawing preparation.</p> <p>Review consultant and contractor engineering deliverables.</p> <p>Participate in project scope development, technical reviews, and constructability assessments.</p> <p>Ensure project designs integrate effectively with existing facilities.</p> <p>Coordinate engineering deliverables during project execution and commissioning activities.</p> <p>Support handover processes and verification of final project documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering/production engineering or CAD/CAM engineering or equivalent</p> <p><b>Experience: </b></p> <p> Bachelor s degree with 15+ years experience in designs and drafting mechanical structures and mechanical equipment in mining, minerals processing, or heavy industrial operations.</p> <p> Experience in CAD/CAM, SolidWorks or equivalent design software</p> <p> Minimum 5 years in a senior engineering, design coordination, or technical authority role.</p> <p>Certifications: Candidate must have followed certification</p> <p> Certified AutoCAD Professional or equivalent CAD Design Certification.</p> <p>Following certifications added advantage</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Certified Maintenance and Reliability Professional (CMRP).</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Autodesk Certified Professional (ACP) or equivalent advanced CAD certification.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Crushing &amp; Mills Maintenance is responsible for the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>Detailed Description </p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Perform maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Perform reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Perfom preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Perform advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Coordinate continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Coordinate a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 5+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Inspection &amp; Condition Monitoring is supporting in developing, implementing, and continuously improving the condition monitoring, predictive maintenance, asset inspection, and integrity management programs across mining, processing, utilities, and infrastructure assets. The role ensures that equipment health is effectively monitored using predictive technologies and inspection methodologies to identify potential failures, optimize maintenance strategies, improve equipment reliability, and maximize asset availability.</p> <p>The position provides support to technical leadership in vibration analysis, thermography, lubrication analysis, ultrasound testing, nondestructive testing (NDT), asset integrity management, reliability improvement initiatives, and risk-based inspection programs. The role supports maintenance, reliability, operations, and project teams through data-driven decision-making, equipment condition assessment, failure prevention, and continuous improvement programs to achieve world-class asset performance and operational excellence.</p> <p>Detailed Description </p> <p>CONDITION MONITORING PROGRAM MANAGEMENT</p> <p>Support in developing, implementing, and continuously improving the site-wide condition monitoring program.</p> <p>Support in establishing predictive maintenance strategies for critical plant and mobile equipment.</p> <p>Support in developing equipment monitoring routes, inspection plans, and asset health assessment methodologies.</p> <p>Ensure effective utilization of condition monitoring technologies to detect early-stage equipment deterioration.</p> <p>Review asset condition data and provide recommendations to prevent equipment failures.</p> <p>Establish inspection frequencies, alarm limits, and monitoring standards.</p> <p>Ensure condition monitoring activities are aligned with reliability and asset management objectives.</p> <p>Support digitalization initiatives relating to equipment health monitoring and predictive analytics.</p> <p>VIBRATION ANALYSIS &amp; MACHINERY DIAGNOTICS</p> <p>Perform vibration monitoring and analysis activities for rotating equipment.</p> <p>Conduct advanced vibration diagnostics and fault identification.</p> <p>Identify bearing defects, misalignment, imbalance, looseness, resonance, gear defects, and mechanical degradation.</p> <p>Establish vibration baselines and equipment health indices.</p> <p>Develop corrective action recommendations based on vibration analysis findings.</p> <p>Provide technical guidance to maintenance teams regarding equipment condition and required interventions.</p> <p>Monitor effectiveness of corrective actions and maintenance outcomes.</p> <p>THERMOGRAPHY AND INFRARED INSPECTION</p> <p>Execute and manage infrared thermography inspection programs.</p> <p>Conduct thermal condition assessments of electrical, mechanical, and process equipment.</p> <p>Identify abnormal temperature conditions and potential equipment failures.</p> <p>Verify corrective actions through follow-up thermal inspections.</p> <p>Maintain thermal imaging databases and inspection records.</p> <p>Develop thermography inspection standards and reporting requirements.</p> <p>LUBRICATION AND OIL ANALYSIS MANAGEMENT</p> <p>Execute lubrication excellence and oil analysis programs.</p> <p>Monitor lubricant condition, contamination levels, wear metals, and fluid degradation.</p> <p>Establish oil sampling schedules and testing requirements.</p> <p>Analyze laboratory reports and recommend corrective maintenance actions.</p> <p>Optimize lubrication practices and lubricant selection strategies.</p> <p>Support contamination control and machine health improvement initiatives.</p> <p>ULTRASOUND AND ADVANCED PREDICTIVE TECHNOLOGIES</p> <p>Manage ultrasound inspection activities for mechanical, electrical, and process systems.</p> <p>Conduct inspections for compressed air leaks, steam leaks, bearing defects, and electrical discharge.</p> <p>Evaluate and implement advanced predictive maintenance technologies where applicable.</p> <p>Support development of asset health monitoring systems and online condition monitoring solutions.</p> <p>Identify opportunities to improve predictive maintenance effectiveness.</p> <p>INSPECTION &amp; ASSET INTEGRITY MANAGEMENT</p> <p>Support in developing inspection strategies and risk-based inspection programs for fixed and rotating assets.</p> <p>Ensure inspection activities comply with applicable engineering standards, statutory requirements, and company procedures.</p> <p>Coordinate internal and external inspection activities.</p> <p>Develop statutory inspection programs for pressure vessels, tanks, pipelines, lifting equipment, and critical structures.</p> <p>Coordinate thickness monitoring and corrosion management programs.</p> <p>Manage inspection intervals and equipment integrity risk assessments.</p> <p>Ensure compliance with API, ASME, ISO, and applicable regulatory inspection requirements.</p> <p>Support Fitness-for-Service (FFS) assessments and equipment life extension studies</p> <p>Review inspection findings and assess equipment fitness for service.</p> <p>Monitor asset degradation mechanisms and recommend mitigation actions.</p> <p>Support asset integrity assessments and life extension studies.</p> <p>Maintain inspection records, reports, and regulatory compliance documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Asset Management, Industrial Engineering, or equivalent discipline.</p> <p><b>Experience:</b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in condition monitoring, inspection, reliability engineering, asset integrity, and predictive maintenance within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p>Certifications: Mandatory: Vibration Analysis Certification (ISO CAT II minimum).</p> <p>Added Advantage:</p> <p> ISO CAT III or IV Vibration Analyst,</p> <p> ISO 18436 Condition Monitoring Certifications,</p> <p> Infrared Thermography Certification Level I/II,</p> <p> Ultrasound Certification Level I/II,</p> <p> ASNT NDT Level II/III,</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Maintenance Contracts is responsible for administering and managing maintenance service contracts, supporting contractor performance management, coordinating procurement and commercial activities related to maintenance services, and ensuring contractual compliance across all maintenance operations. The role supports maintenance execution by managing contractor resources, contract documentation, tendering activities, service agreements, cost control, and vendor performance to ensure safe, reliable, and cost-effective plant operations. The position plays a key role in establishing contract management processes and supporting commissioning, start-up, and sustainable operational performance.</p> <p><b>Detailed Description </b></p> <p>CONTRACT ADMINISTRATION &amp; MANAGEMENT</p> <p>Administer maintenance service contracts, agreements, and framework arrangements to ensure compliance with company requirements and contractual obligations.</p> <p>Review, prepare, and manage scopes of work, technical specifications, service agreements, and contract documentation.</p> <p>Coordinate contract tendering, bid evaluations, technical assessments, and contractor selection processes.</p> <p>Monitor contract performance against agreed KPIs, deliverables, and service levels.</p> <p>Manage contract variations, claims, extensions, and contract close-out activities.</p> <p>Maintain accurate contract records, correspondence, and commercial documentation.</p> <p>Ensure all contracts are administered in accordance with company procurement and governance procedures.</p> <p>Use SAP for resource planning and manning</p> <p>Generate Power BI reports for contracts administration</p> <p>CONTRACTOR PERFORMANCE MANAGEMENT</p> <p>Monitor contractor performance, productivity, and compliance with contractual requirements.</p> <p>Conduct regular contractor performance reviews and KPI assessments.</p> <p>Coordinate contractor mobilization and demobilization activities.</p> <p>Support development and implementation of contractor improvement plans where required.</p> <p>Ensure contractor resources meet operational, technical, and safety requirements.</p> <p>Maintain effective working relationships with contractors, suppliers, and external service providers.</p> <p>PROCUREMENT &amp; COMMERCIAL SUPPORT</p> <p>Work closely with Procurement and Maintenance teams to support sourcing of maintenance services and contracts.</p> <p>Participate in commercial and technical evaluations of contractor bids and proposals.</p> <p>Support contract negotiations, renewals, and service level agreements.</p> <p>Review contractor invoices and verify work completion in accordance with contract terms.</p> <p>Assist in the preparation of budget estimates and cost forecasts related to maintenance contracts.</p> <p>Identify opportunities for cost optimization and value improvement while maintaining service quality.</p> <p>MAINTENANCE SUPPORT COORDINATION</p> <p>Coordinate with maintenance planners, supervisors, and operations teams to ensure contracted services are delivered effectively.</p> <p>Support execution of planned maintenance, shutdowns, and special projects through contractor coordination.</p> <p>Ensure timely availability of external specialist services and OEM support.</p> <p>Facilitate communication between contractors and site stakeholders.</p> <p>Monitor contractor resource allocation to support maintenance objectives.</p> <p>SHUTDOWN &amp; PROJECT CONTRACT SUPPORT</p> <p>Support contract planning and administration activities for shutdowns, turnarounds, and major maintenance projects.</p> <p>Coordinate contractor readiness reviews, resource planning, and mobilization requirements.</p> <p>Monitor contractor performance during shutdown execution.</p> <p>Assist with post-shutdown contract evaluations and lessons learned reviews.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop and maintain contract performance reports and dashboards.</p> <p>Monitor and report key performance indicators, including:</p> <p>Contractor Performance</p> <p>Service Level Compliance</p> <p>Contract Utilization</p> <p>Cost Performance</p> <p>Contractor Safety Performance</p> <p>Invoice Processing Efficiency</p> <p>Prepare periodic reports for management on contract status and performance.</p> <p>Analyze trends and recommend improvement opportunities.</p> <p>SAFETY, QUALITY &amp; COMPLIANCE</p> <p>Ensure contractors comply with company health, safety, environmental, and quality requirements.</p> <p>Participate in contractor safety audits, inspections, and risk assessments.</p> <p>Verify contractor compliance with permit-to-work systems and site procedures.</p> <p>Support incident investigations involving contractors and ensure corrective actions are implemented.</p> <p>Promote a strong safety culture and adherence to company standards.</p> <p>STAKEHOLDER MANAGEMENT</p> <p>Maintain effective relationships with internal stakeholders, contractors, suppliers, and service providers.</p> <p>Provide contract-related advice and support to Maintenance, Procurement, Finance, and Operations teams.</p> <p>Support development and implementation of contract management best practices.</p> <p>Participate in continuous improvement initiatives to enhance contract performance and operational efficiency.</p> <p>COST CONTROL &amp; BUDGET MANAGEMENT</p> <p>Monitor maintenance contract expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Review cost trends and identify opportunities for savings.</p> <p>Support annual budgeting and forecasting activities for maintenance contracts.</p> <p>Ensure accurate cost allocation and reporting for contracted services.</p> <p>Job Requirements </p> <p>Education: </p> <p> Bachelor s degree or Higher Diploma</p> <p>Experience: </p> <p> Bachelor s degree with 10+ years or Higher Diploma with 15+ years of maintenance planning, shutdown planning, contracts administration, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Minimum 8 years in a supervisory or level role.</p> <p> Proven experience with large-scale shutdown planning and contractor management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p><br></p>

<p>Brief Posting Description </p> <p>The Senior Engineer Reliability &amp; Performance is responsible for developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p> <p>The position provides technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p> <p>Detailed Description </p> <p>RELIABILITY ENGINEERING &amp; STRATEGY MANAGEMENT</p> <p>Develop and continuously improve site reliability engineering programs and methodologies.</p> <p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p> <p>Lead asset reliability improvement initiatives to improve equipment availability and operational performance.</p> <p>Develop reliability standards, procedures, and best practices.</p> <p>Facilitate reliability reviews and equipment performance assessments.</p> <p>Support long-term asset management and lifecycle planning activities.</p> <p>Ensure reliability objectives align with business and operational requirements.</p> <p>ASSET PERFORMANCE MANAGEMENT</p> <p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p> <p>Develop asset performance indicators and equipment health indices.</p> <p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p> <p>Conduct performance benchmarking and improvement studies.</p> <p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p> <p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p> <p>Establish performance improvement roadmaps for critical assets.</p> <p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p> <p>Lead Reliability-Centered Maintenance studies for critical assets.</p> <p>Review and optimize maintenance strategies based on equipment criticality and risk.</p> <p>Develop maintenance task plans and reliability improvement recommendations.</p> <p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p> <p>Ensure maintenance strategies support reliability and business objectives.</p> <p>Participate in maintenance program reviews and audits.</p> <p>FAILURE ANALYSIS &amp; DEFECT ELIMINATION</p> <p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Analyze recurring failures and reliability issues.</p> <p>Identify bad actors and develop corrective action plans.</p> <p>Monitor implementation and effectiveness of reliability improvement actions.</p> <p>Promote defect elimination methodologies throughout maintenance and operations teams.</p> <p>Capture lessons learned and implement sustainable solutions.</p> <p>ASSET CRITICALITY &amp; RISK MANAGEMENT</p> <p>Lead asset criticality assessments across all plant and infrastructure assets.</p> <p>Develop and maintain asset criticality rankings and risk profiles.</p> <p>Support risk-based maintenance and reliability decision-making processes.</p> <p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p> <p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p> <p>Support business continuity and risk mitigation initiatives.</p> <p>MAINTENANCE OPTIMIZATION</p> <p>Analyze maintenance effectiveness and identify improvement opportunities.</p> <p>Optimize preventive maintenance frequencies and task content.</p> <p>Support development of predictive and condition-based maintenance programs.</p> <p>Evaluate work management performance and maintenance execution effectiveness.</p> <p>Improve maintenance productivity through data analytics and best practice implementation.</p> <p>Support spare parts optimization and critical equipment strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p> Minimum 5 years in senior reliability, asset management, maintenance excellence, or performance improvement role.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP).</p> <p> Certified Reliability Engineer (CRE).</p> <p> Asset Reliability Practitioner (ARP-E, ARP-L, or ARP-A).</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> IAM Certificate or Diploma in Asset Management.</p> <p> Reliability Centered Maintenance (RCM) Practitioner Certification</p> <p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p> <p> ISO 55001 Asset Management Lead Implementer or Lead Auditor.</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Project Management Professional (PMP).</p> <p> SAP PM Certification.</p> <p> Power BI Data Analytics Certification.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Conveyors &amp; Utilities Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of conveyor systems, stacking systems, reclaiming systems, feeders, transfer stations, utility systems, and associated plant equipment within mineral processing operations. The role ensures the safe, reliable, and cost-effective operation of conveyors and utility assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>The incumbent is responsible for the maintenance and reliability of conveyor belts, pulleys, idlers, drives, gearboxes, feeders, stacking systems, reclaiming systems, compressed air systems, process water systems, fire water systems, pumps, utility distribution networks, and associated mechanical equipment. The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, utility availability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>CONVEYORS &amp; UTILITIES MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for conveyor systems, transfer stations, feeders, stacking &amp; reclaiming systems, utility systems, pumps, compressors, and auxiliary equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on maintenance planning, scheduling, and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for conveyors, pulleys, idlers, belt cleaners, drives, gearboxes, feeders, pumps, compressors, and utility systems.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for conveyor and utility assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of conveyor, stacker, reclaimer, and utility system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the mechanical integrity of critical conveyors and utility equipment.</p> <p>Monitor wear-life performance of belts, pulleys, idlers, chutes, drives, pumps, compressors, and utility systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major conveyor and utility equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance and reliability issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review of OEM recommendations, technical reports, and equipment upgrade proposals.</p> <p>Support commissioning, testing, and startup of new equipment and system modifications.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to enhance conveyor availability, material handling efficiency, utility system reliability, and plant throughput.</p> <p>Identify opportunities to reduce maintenance costs and minimize unplanned downtime.</p> <p>Implement reliability improvement and Lean Maintenance methodologies.</p> <p>Develop business cases for equipment upgrades and improvement projects.</p> <p>Track and report benefits realized from improvement initiatives.</p> <p>Promote maintenance and operational best practices across the organization.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>

<p>JOB CONTENT </p> <p>Ensures the reliability, availability, and performance of OETC s assets. This role involves developing and optimizing maintenance plans using CMMS and leveraging data from the online condition monitoring system. The engineer ensures alignment with global best practices, including ISO 55001, and collaborates with cross-functional teams to address asset performance issues and enhance maintenance strategies</p> <p> Assist with the development of Asset Performance Framework, Strategies, Objectives, Plans, and Asset Risk Register.</p> <p> Develop, upload, and manage annual maintenance plans in the CMMS, utilizing historical data and asset performance trends to optimize reliability and minimize downtime</p> <p> Assist in the development and implementation of best-practice asset management standards, policies, and procedures in line with ISO 55001 and other global standards</p> <p> Review, validate, and update work orders in the CMMS to ensure accuracy, completeness, and compliance with maintenance schedules</p> <p> Identify and address missing, overdue, or incomplete work orders, ensuring data integrity and timely execution of maintenance tasks</p> <p> Monitor the execution of maintenance activities to ensure compliance with approved plans, schedules, and quality standards</p> <p> Follow up on incomplete or delayed maintenance tasks, coordinating with relevant teams to resolve issues and minimize disruptions</p> <p> Prepare and present maintenance progress reports, highlighting key achievements, challenges, and areas for improvement</p> <p> Work closely with relevant departments, including operations, performance engineering, and field teams, to ensure effective maintenance planning and execution</p> <p> Ensure seamless integration of OLCM data with the CMMS to enable data-driven decision-making</p> <p> Collaborate with performance engineers to analyze asset performance data, identify reliability and asset health risks, and provide input to develop proactive and targeted maintenance strategies</p> <p> Highlight performance-related concerns and incorporate them into maintenance plans to address potential risks and improve asset reliability</p> <p> Provide feedback to performance engineers on maintenance outcomes to support continuous improvement and innovation in asset management practices</p> <p> Contribute to continuous improvement initiatives by identifying opportunities to enhance maintenance planning, execution, and asset performance</p> <p> Contribute to the preparation of business and work plans to achieve technical deliverable</p> <p> Manage and review critical spares requirements, coordinating with procurement and inventory teams to ensure the timely availability of resources, tools, and spare parts, minimizing downtime during maintenance activities</p> <p> Contributes to continuous improvement and innovation in optimized asset maintenance plans.</p> <p> Adhere to the Company s health, safety, environmental and security policies always and immediately report violations of these policies to OETC health, safety &amp; environment representatives;</p> <p> Knowledge and Understanding of Asset Management, HSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, ISO45001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p>Job Qualifications and Experience</p> <p>Minimum Qualifications</p> <p> Bachelor s degree in electrical Power Engineering or equivalent </p> <p>Professional Experience </p> <p> 5+ years business experience in the utility of Transmission business</p> <p> </p> <p> </p>

<p><b>JOB PURPOSE</b></p> <p>The Planning and Contracts Lead Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, contractor administration, and maintenance control processes to ensure safe, reliable, and efficient plant operations.The role provides leadership in maintenance planning and resource coordination, oversees contract administration and contractor performance, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, contract management frameworks, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p> </p> <p><b><br></b></p><p><b>MAIN TASKS, DUTIES AND RESPONSIBILITIES</b></p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p> Develop and implement maintenance planning and scheduling processes.</p> <p> Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p> Review work requests and convert approved work into executable job plans.</p> <p> Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p> Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p> Monitor schedule compliance and planning effectiveness.</p> <p> Ensure maintenance backlogs are effectively managed and prioritized.</p> <p> Support development of maintenance strategies for critical equipment.</p> <p> Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p> Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p> Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p> Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p> Manage maintenance work management processes within ERP/CMMS systems.</p> <p> Ensure work order quality, data accuracy, and system compliance.</p> <p> Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p> Monitor key work management KPIs.</p> <p> Maintain planning and scheduling standards across all maintenance disciplines.</p> <p> Ensure historical maintenance records are maintained for reliability analysis.</p> <p> Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>CONTRACTS ADMINISTRATION</p> <p> Administer maintenance service contracts and agreements.</p> <p> Monitor contractor performance against contractual obligations and KPIs.</p> <p> Coordinate tender evaluations and contractor selection processes.</p> <p> Review scope-of-work documents, service agreements, and technical specifications.</p> <p> Support commercial negotiations and contract renewals.</p> <p> Ensure contract compliance with company policies and procurement procedures.</p> <p> Manage contractor claims, variations, and contract close-out activities.</p> <p> Maintain contract documentation and administration records.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p> Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p> Develop integrated shutdown schedules and resource plans.</p> <p> Coordinate labor, equipment, materials, and contractor requirements.</p> <p> Monitor shutdown planning milestones and readiness reviews.</p> <p> Support execution teams during shutdown implementation.</p> <p> Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p> Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p> Develop maintenance planning and execution performance dashboards.</p> <p> Monitor KPIs including: </p> <p>o Schedule Compliance</p> <p>o PM Compliance</p> <p>o Backlog Management</p> <p>o Work Order Closure Rates</p> <p>o Contractor Performance</p> <p>o Maintenance Cost Performance</p> <p>o Shutdown Performance</p> <p> Prepare weekly and monthly maintenance performance reports.</p> <p> Analyze trends and recommend improvement initiatives.</p> <p> Support annual maintenance budgeting and forecasting processes.</p> <p><br></p> <p> </p> <p> </p>

<p>Oversee and manage all activities related to maintenance of the rotating equipment including - developing QA/QC protocols and procedures for preventive and corrective maintenance by delivering technical excellence and leadership to ensure that the technical integrity of the rotating equipment is maintained.</p><p><strong>MANAGERIAL RESPONSIBILITIES</strong></p><ul><li>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</li><li>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Conduct regular check ins with team members for alignment on expectations and performance</li><li>Lead the rotating equipment team and ensure effective and efficient utilization of resources to achieve departmental objectives</li><li>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES</strong></p><p><strong>Rotating Equipment Strategic Planning and Budgeting:</strong></p><ul><li>Develop departmental strategies in alignment with the corporate strategy and ensure alignment of the delivery of business results to the corporate objectives</li><li>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</li><li>Develop optimum Capex &amp; Opex budget for all rotating equipment engineering activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available at all times</li></ul><p><strong>Project, Operation, and Maintenance of Rotating Equipment:</strong></p><ul><li>Lead Rotating engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</li><li>Manage Rotating project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</li><li>Develop and manage the delivery of technical excellence within rotating equipment engineering</li><li>Recommend best practices related to operation and maintenance of the rotating equipment</li><li>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</li><li>Propose and initiate reliability and safety improvement projects in coordination with reliability teams</li><li>Direct the team in technical studies and failure investigations, Process and Instrument Diagram Reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</li><li>Act as a deputy subject matter expert (SME) for rotating equipment engineering and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</li></ul><p><strong>Management of Spare Parts:</strong></p><ul><li>Manage and control the inventory of materials and spare parts, ensure that spare parts and material purchase orders have been prepared and updated in time on SAP and the materials are supplied well in advance of the scheduled execution</li><li>Identify spare parts and consumables requirements for rotating equipment, and submit Material Master requests for the same, as and when required</li><li>Ensure that the handling procedures are in place for all equipment (capitalized insurance spares, special tools etc.) to be handled with care to ensure its integrity and long service life</li></ul><p><strong>Quality and Assurance Management:</strong></p><ul><li>Ensure technical quality of all the rotating equipment engineering activities within the department</li><li>Ensure that the rotating equipment meet the required standards set per code or OEM or Industry best practices by regular or surprise inspections</li><li>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</li><li>Liaise with relevant area managers within production, maintenance, projects, and technology to develop and strengthen assurance processes to ensure uninterrupted plant operation</li><li>Oversee departmental activities and ensure HSSE and regulatory compliance</li></ul><p><strong>Vendor Management and Engineering Contracts:</strong></p><ul><li>Liaise with vendors as part of long-term service contracts, ensure contract terms and conditions are fulfilled</li><li>Support ENR in strategizing major engineering contracts from inception, contract strategy, contractor evaluation to selection</li><li>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</li></ul><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><ul><li>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</li><li>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in Mechanical Engineering or Equivalent</p><p>10 years of rotating equipment experience in LNG or Oil and Gas industry</p><p>Technical Authority Level3</p><p>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>