وظائف مهندسين مدنى في سلطنة عمان

<p>Manage instrumentation and control activities across the DRI Plant. Support installation, testing, commissioning, start-up, and maintenance activities. Review P&amp;IDs, instrumentation datasheets, control system architecture, and technical drawings. Support FAT, SAT, testing, and performance verification activities. Monitor and troubleshoot DCS, PLC, SIS/ESD, and SCADA systems. Coordinate with technology licensors, vendors, EPC contractors, and internal teams. Support preventive and corrective maintenance activities. Lead and support instrumentation engineers, supervisors, and technicians. Ensure compliance with applicable HSE and technical standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Instrumentation, Electronics, Electrical &amp; Instrumentation Engineering, or a related discipline with 10 15 years of relevant experience; OR Diploma in Instrumentation Engineering with 12 18 years of relevant experience. Minimum 8 years of experience with MIDREX or HYL/ENERGIRON technology. Strong knowledge of DCS and PLC systems. Experience with SIS/ESD, SCADA, and industrial control systems. Exposure to Siemens PCS 7 is highly preferred. Knowledge of SAP PM/MM, HART, Modbus, HAZOP, and SIL is an advantage. Strong commissioning, start-up, maintenance, and troubleshooting experience. Good English communication skills.</p>

<p>Developing Safe work method. Preparation of Hazards Identification and Risk Assessment (HIRA). Aspect Impact Study, Emergency Response Plan (ERP). Preparing Project specific EHS Plans. Investigating all serious incidents &amp; initiate necessary corrective &amp; preventive actions at sites and Analyse incident trends &amp; initiate necessary Proactive measures at Project sites. Conducting Internal audit and identify Non - conformities and follow up for corrective action Review and monitoring EHS performance of sites including compliance to legal requirements Complying with contractual conditions &amp; fulfilling customer requirements Identifying the training need, designing and imparting training for Staff, subcontractor, workmen, visitors and develop module Ensuring Quality of PPE its adequate availability at site. Knowledge of conduction regular/periodic inspection Promoting EHS culture through campaign &amp; competition</p>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> About the Role You’ll design coding tasks that challenge frontier AI coding agents.<br> Each task is a self-contained Docker environment with a broken piece of software; an AI agent attempts the fix; automated tests verify the outcome.<br> Your deliverable is the full task package: broken code, tests, instructions, and a reference solution proving the task is solvable.<br> Responsibilities : Invent a realistic developer scenario — a real bug, a broken ETL, a missing feature — not a toy problem.<br> Build a reproducible Docker environment with pinned dependencies.<br> Write a pytest that verifies outcomes, not specific commands — deterministic, non-flaky, and does not leak the fix.<br> Write an instruction.<br>md that reads like a Jira ticket a developer would receive.<br> Write a reference solve.<br>sh proving the task is solvable.<br> Calibrate difficulty so current state-of-the-art agents solve the task 20–60% of the time.<br> Iterate based on feedback from expert QA reviewers.<br> Later: review other authors’ tasks as a QA reviewer.<br> Not in scope Data labeling, prompt engineering.<br> Production code to ship — you design problems and verification for AI agents.<br> Leetcode puzzles — scenarios must look like real developer work.<br> Not every candidate task ships — quality over quantity.<br> Requirements 3+ years of production software development in one backend stack — Python, Go, Node.<br>js, Java, or Rust.<br> Depth in one stack beats breadth.<br> Python + pytest fluency — required regardless of primary stack.<br> The task harness is pytest-based even when the broken app is in another language.<br> Fixtures, parametrize, monkeypatch, timeouts, conftest.<br>py. Docker authoring — reproducible Dockerfiles, pinned dependencies, multi-stage builds when needed, non-root user.<br> Linux &amp; Bash — comfort debugging inside containers (strace, lsof, journalctl); shell beyond set -euo pipefail.<br> AI coding agent experience — Claude Code, Cursor, Roo Code, or similar, on non-trivial work.<br> You can cite a specific time the AI was confidently wrong and how you caught it.<br> English — B2+ written.<br> Not a fit Data Science, ML, or Computer Vision engineers without backend-engineering output.<br> Manual QA testers without automation or test authoring.<br> Frontend-only, low-code / no-code, IT Support, or Business Analysts.<br> Engineers who have never written pytest from scratch.<br> Junior, intern, or assistant as the most recent role.<br> Preferred qualifications Domain depth in Security, System Administration (nginx / systemd / cron), Scientific Computing (NumPy / PyTorch / SciPy), DevOps, or Git internals.<br> Modern Python tooling (uv, poetry, pyproject.<br>toml). Coverage tooling (pytest-cov, coverage.<br>py, gcov, llvm-cov, kcov).<br> Fuzzing or property-based testing (Hypothesis).<br> Prior contribution to agent-evaluation benchmarks or related frameworks.<br> Process Apply → Pass qualification (90-minute sample-task screen + short behavioral interview) → Join a project → Complete tasks → Get paid.<br> Time commitment Onboarding: ~10 hours per first task.<br> Steady state: ~5 hours per task, 2–4 parallel tasks per author.<br> Realistic weekly load: 8–20 hours.<br> Higher volume available for top performers.<br> You choose when and how to contribute; tasks must be submitted by the deadline and meet acceptance criteria.<br> Compensation: Paid contributions, rates up to $35/hour *.<br> Task-based compensation equivalent to hourly rate, depending on performance and volume.<br> Some projects include incentive payments.<br> *Rates vary based on expertise, skills assessment, location, project needs, and other factors.<br> Higher rates may be provided to highly specialized experts.<br> Lower rates may apply during onboarding or non-core project phases.<br> Payment details are shared per project.<br> Apply Submit your CV via the Mindrift platform.<br> Indicate your English level, note this role (Software Engineering Evaluation Specialist — Terminal Bench), and include a GitHub profile link if available.<br></span> </div>

<p><b>❖ PIPELINE ENGINEER</b></p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Degree/Diploma in Mechanical Engineering. Experience: Minimum 7 years relevant Oil &amp; Gas</p><p>construction experience, including 5 years in the Middle East, in a supervisory position.</p><p>Technical Skills: Strong knowledge of pipeline welding, lowering, HSS coating, STOPAQ application and box-up activities.</p><p>Test Packs &amp; Documentation: Prepare test packs, review as-built drawings, and ensure completed works comply with Company standards before handover.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>HYDROTEST ENGINEER</p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Diploma or Bachelor's Degree in Engineering, preferably Mechanical Engineering.</p><p>Experience: Minimum 7 years relevant experience in onshore Oil &amp; Gas construction, including 5 years in Middle East Oil &amp; Gas in a supervisory role.</p><p>Hydrotesting Experience: Strong experience in pipeline and piping hydrotesting, including cleaning, gauging and pressure testing activities.</p><p>Technical Skills: Sound knowledge of hydrotest</p><p>procedures, specifications, standards, documentation and site execution.</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><span>The </span><span>Principal Process Engineer&nbsp;</span><span>will be responsible&nbsp;</span><span>to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time</span></p><br><p><span><strong>Designing the future. Transforming the world</strong></span></p><br><p><span>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</span><br><span><strong>What we can offer</strong></span></p><br><ul> <li><span><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</span></li> <li><span><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</span></li> <li><span><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market</span></li> <li><span><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</span></li> <li><span><strong>Workmen’s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</span></li> <li><span><strong>Employee Assistance Programme:&nbsp;</strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</span></li></ul><p><span><strong>Typical responsibilities</strong></span></p><br><ul> <li><span><strong>Study, review and identify the scope from the input document of previous phase of ORP.</strong></span></li> <li><span><strong>Develop Terms of Reference (TOR) for each project under area of responsibility and in consultation with relevant IM&amp;T Portfolio Analysts.</strong></span></li> <li><span><strong>Develop CTR estimate and provide inputs to project execution plan/schedule for projects as necessary.</strong></span></li> <li><span><strong>Create and manage Project MTO of Telecom in SAP.</strong></span></li> <li><span><strong>Plan and Execute procurement activities as per the agreed implementation strategy and in line with C&amp;P guidelines.</strong></span></li> <li><span><strong>Review the key project deliverables and liase with IM&amp;T team ensuring the FEED Office standards compliance.</strong></span></li> <li><span><strong>Supervise and ensure alignment of Quality System requirement for all projects executed in FEED Office.</strong></span></li> <li><span><strong>Actively involve in CI and Lean Management with regards to FEED Office proecdures and Project management.</strong></span></li> <li><span><strong>Participate in quality audits and own the responsibility of resolving any findings / NCR / Improvements raised for Telecoms.</strong></span></li> <li><span><strong>Execute allocated projects in line with project plan, actively participating in all phases of the project. Identify, assess and manage risks to the success of the project.</strong></span></li> <li><span><strong>Maintain, Review and Monitor the project Cost Performance Index and Schedule Performance Index for the projects under execution.</strong></span></li> <li><span><strong>Adopt and implement Project Management best practices in line with directives from FEED Office, IM&amp;T project office and corporate guidelines.</strong></span></li> <li><span><strong>Conduct and attend relevant workshops and framing sessions related to project execution in accordance with project schedule.</strong></span></li> <li><span><strong>Provide input to project Value Assurance Reviews during major stage gates of the key projects.</strong></span></li> <li><span><strong>Manage contractors as per the corporate guidelines stipulated under IMT-502 List.</strong></span></li> <li><span><strong>Manage internal resources for the implementation of FEED Office projects and activities associated with FEED Office standards and procedures.</strong></span></li> <li><span><strong>Manage and execute FEED Office projects. Ensure completion within the agreed time scale while maintaining Company standards.</strong></span></li> <li><span><strong>Ensure project handover and demonstrate the handover as per FEED Office standards.</strong></span></li> <li><span><strong>Complete technical closeouts as per the FEED office standards.</strong></span></li></ul><br>Qualifications:<br><p><span><strong>What makes you remarkable?&nbsp;</strong></span></p><br><p><span>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</span></p><br><p><span><strong>Experience:</strong></span></p><br><ul> <li>BSc Engineering in Telecoms, Computing, Engineering, Science or related fields.</li> <li>Minimum of 15 years in FEED/Engineering Experience and 10 years relevant experience in Oil &amp; Gas.</li> <li>Proven project management and leadership skills, and good knowledge of business analysis.</li> <li>Excellent in planning, communication and presentation skills, and is expert in project quality management</li> <li>Excellent interpersonal, written &amp; oral communication skills with the ability to persuade, lead teams &amp; build trust at all levels in the organisation.</li> <li>Proven track record in customer relationship management.</li> <li>Comprehensive knowledge of relevant project life-cycles.</li> <li>A sound knowledge in Exploration &amp; Production Engineering business activities is required or in depth knowledge within a respective portfolio discipline.</li> <li>Demonstrates ability to proactively seek responsibility and shows systematic approach to problem solving</li> <li>Possesses an in-depth understanding of IM&amp;T practices, principles, and information and communications technology.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Key Responsibilities:&nbsp;</strong>Knowledge of EHS in term of-</p><br><ul><li>Developing Safe work method.</li><li>Preparation of Hazards Identification and Risk Assessment (HIRA).</li><li>Aspect Impact Study, Emergency Response Plan (ERP).</li><li>Preparing Project specific EHS Plans.</li><li>Investigating all serious incidents &amp; initiate necessary corrective &amp; preventive actions at sites and Analyse incident trends &amp; initiate necessary Proactive measures at Project sites.</li><li>Conducting Internal audit and identify Non - conformities and follow up for corrective action</li><li>Review and monitoring EHS performance of sites including compliance to legal requirements</li><li>Complying with contractual conditions &amp; fulfilling customer requirements</li><li>Identifying the training need, designing and imparting training for Staff, subcontractor, workmen, visitors and develop module</li><li>Ensuring Quality of PPE its adequate availability at site.</li><li>Knowledge of conduction regular/periodic inspection</li><li>Promoting EHS culture through campaign &amp; competition</li></ul> </div>

<p><strong>Job title</strong> </p> <p>Expert Contract Engineer</p> <p> <strong>Grade</strong> </p> <p> </p> <p> <strong>Stream</strong> </p> <p>Finance </p> <p> <strong>Function</strong> </p> <p>Procurement </p> <p> <strong>Location</strong> </p> <p>Oman </p> <p> <strong>Budget control</strong> </p> <p>*OPEX and/or CAPEX and/or Revenue amount as relevant*</p> <p> <strong>Reporting to</strong> </p> <p>Manager Projects Contracts</p> <p> <strong>Direct Reports </strong> </p> <p>0</p> <p> <strong>Job purpose </strong> </p> <p>Provides engineering / technical support on contract processes, by coordinating and executing complex contract formation, award and administration processes and providing a quality service to internal customers in a customer-oriented and commercially advantageous manner; conducting reviews and considering legal aspects of contract award &amp; administration; conducting commercial bids evaluation and tenders and ensuring that costs are controlled; providing advice, guidance and support to the Project team for projects-related contracts including a variety of contracts such as Projects Contracts, EPC, Consultancy Service Contracts, FEED Contracts, Operational, Technical, and Maintenance Contracts and identifying opportunities for optimization, as well as investigating and supporting optimization proposals from other areas, in order to support the safe, reliable, efficient and optimal functioning of the unit s activities at optimum cost.</p> <p> </p> <p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p> <strong>Main tasks and responsibilities</strong> </p> <ul> <li>Drafts appropriate complex contractual and commercial terms and conditions to best serve and protect the Company s interests. Lead and provide advice to the team on Contract synergies and unify the common ones before start tendering processes.</li> <li>Provide thought and advise on development of tender specifications for Projects, EPC, Consultancy Service, FEED, Operational, Technical, etc. Contracts, in line with business expectations, risk perspective and applicable laws. </li> <li>Assist in the development of pre and post contracting strategies, plans and tactics in collaboration with end user department.</li> <li>Ensures the analysis of complex contract requests from the user departments and determines the appropriate method of procurement.</li> <li>Lead the execution and provide thought, advise, insights for full contract cycle from pre-award to post-award and carry out contract management until closeout Including the tender-board approvals. </li> <li>Assist in pre-award and post award contract management, including change management, insurance issues, claims mitigation &amp; settlement and contracts close out. This includes escalation of disputes whenever required with support of Legal.</li> <li>Provide expertise, transfer knowledge to contract engineers on how to draft complex contracts and commercial terms and conditions to best serve and protect the company interests. Including technical &amp; commercial recommendations. </li> <li>Advise and provide insights to end user for conducting technical evaluation. </li> <li>Support negotiations with vendors to realize the total economic value to the company considering quality and cost.</li> <li>Support tendering activities and contract management activities in alignment with the organization's policy and code of ethics to ensure the right contracts are in place to deliver value to internal customers.</li> <li>Provide expertise on supporting the management of contract disputes to ensure fair and timely resolution with vendors, including escalation of disputes where needed with the support of legal.</li> <li>Lead the frame to maintain relationship with suppliers within the region to ensure positive, constructive and cost-effective commercial agreements for the company.</li> <li>Monitor market trends and provide advise on accurate supply information to internal customers. </li> <li>Ensure the tracking for contract includes the latest tendering / contracts information and details. </li> <li>Promote and encourage the continuous learning and development among team members including knowledge sharing activities, transfer of knowledge, coaching and personal advise on Contracts procedures, etc. </li> <li>Maintain HSE as a priority through compliance with HSE rules and ensure that all contracts are fully compliance with company HSE policies.</li> </ul> <p> <strong>Key interactions</strong> </p> <p> <strong>Internal:</strong> OQ SAOC Streams, Tender Committee(s)</p> <p> <strong>External</strong>: Contractors, Vendors &amp; Suppliers, Board, Shareholders, governments bodies</p> <p> <strong>Notable Working Conditions. </strong>Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed.</p> <p> <strong>Education requirements</strong> </p> <ul> <li>Bachelor s degree in supply chain, Engineering, Production Operations Management, Business Administration or equivalent. </li> <li>Professional Certifications such CIPS is an added advantage. </li> <li>Master s degree, MBA or any special certifications related to the role is an added advantage.</li> </ul> <p> <strong>Language</strong> </p> <p>Excellent knowledge of written, read, and spoken English (required) </p> <p> <strong>Background and experience</strong> </p> <p> <strong>Competencies and skills</strong> </p> <ul> <li> <strong>A minimum 8 years experience in similar role. </strong> </li> <li>Deep understanding of tender law and tender procedures. </li> <li>Strong working experience in contracts cycle for a variety of contracts (Projects, FEED, EPC, corporate related contracts, project financing related contracts) </li> <li><br></li></ul><ul> </ul> <p> </p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Reliability &amp; Performance is responsible for support in developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p> <p>The position provides support to technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p> <p>Detailed Description </p> <p><b>RELIABILITY ENGINEERING &amp; STRATEGY MANAGEMENT</b></p> <p>Support in developing and continuously improving site reliability engineering programs and methodologies.</p> <p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p> <p>Support in leading asset reliability improvement initiatives to improve equipment availability and operational performance.</p> <p>Support in developing reliability standards, procedures, and best practices.</p> <p>Facilitate reliability reviews and equipment performance assessments.</p> <p>Support long-term asset management and lifecycle planning activities.</p> <p>Ensure reliability objectives align with business and operational requirements.</p> <p>ASSET PERFORMANCE MANAGEMENT</p> <p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p> <p>Develop asset performance indicators and equipment health indices.</p> <p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p> <p>Conduct performance benchmarking and improvement studies.</p> <p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p> <p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p> <p>Establish performance improvement roadmaps for critical assets.</p> <p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p> <p>Support in leading Reliability-Centered Maintenance studies for critical assets.</p> <p>Review and optimize maintenance strategies based on equipment criticality and risk.</p> <p>Develop maintenance task plans and reliability improvement recommendations.</p> <p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p> <p>Ensure maintenance strategies support reliability and business objectives.</p> <p>Participate in maintenance program reviews and audits.</p> <p>FAILURE ANALYSIS &amp; DEFECT ELIMINATION</p> <p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Analyze recurring failures and reliability issues.</p> <p>Identify bad actors and develop corrective action plans.</p> <p>Monitor implementation and effectiveness of reliability improvement actions.</p> <p>Promote defect elimination methodologies throughout maintenance and operations teams.</p> <p>Capture lessons learned and implemented for sustainable solutions.</p> <p>ASSET CRITICALITY &amp; RISK MANAGEMENT</p> <p>Lead asset criticality assessments across all plant and infrastructure assets.</p> <p>Develop and maintain asset criticality rankings and risk profiles.</p> <p>Support risk-based maintenance and reliability decision-making processes.</p> <p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p> <p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p> <p>Support business continuity and risk mitigation initiatives.</p> <p>MAINTENANCE OPTIMIZATION</p> <p>Analyze maintenance effectiveness and identify improvement opportunities.</p> <p>Optimize preventive maintenance frequencies and task content.</p> <p>Support development of predictive and condition-based maintenance programs.</p> <p>Evaluate work management performance and maintenance execution effectiveness.</p> <p>Improve maintenance productivity through data analytics and best practice implementation.</p> <p>Support spare parts optimization and critical equipment strategies.</p> <p>PERFORMANCE ANALYTICS &amp; REPORTING</p> <p>Support in developing and maintaining reliability and performance dashboards.</p> <p>Monitor and report key performance indicators including:</p> <p>Overall Equipment Effectiveness (OEE)</p> <p>Equipment Availability</p> <p>Reliability Performance</p> <p>Mean Time Between Failures (MTBF)</p> <p>Mean Time to Repair (MTTR)</p> <p>Failure Rates</p> <p>Maintenance Backlog</p> <p>PM Compliance</p> <p>Cost of Maintenance</p> <p>Asset Utilization</p> <p>Reliability Improvement Benefits</p> <p>Utilize SAP, Power BI, and other analytical tools to support decision-making.</p> <p>Prepare reliability performance reports and management presentations.</p> <p><b>Education: </b></p> <p>Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p> <p><b>Experience:</b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP).</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p> <p> Lean Six Sigma Green Belt or Black Belt</p> <p> Project Management Professional (PMP).</p> <p> SAP PM Certification.</p> <p> Power BI Data Analytics Certification.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Maintenance Contracts is responsible for administering and managing maintenance service contracts, supporting contractor performance management, coordinating procurement and commercial activities related to maintenance services, and ensuring contractual compliance across all maintenance operations. The role supports maintenance execution by managing contractor resources, contract documentation, tendering activities, service agreements, cost control, and vendor performance to ensure safe, reliable, and cost-effective plant operations. The position plays a key role in establishing contract management processes and supporting commissioning, start-up, and sustainable operational performance.</p> <p><b>Detailed Description </b></p> <p>CONTRACT ADMINISTRATION &amp; MANAGEMENT</p> <p>Administer maintenance service contracts, agreements, and framework arrangements to ensure compliance with company requirements and contractual obligations.</p> <p>Review, prepare, and manage scopes of work, technical specifications, service agreements, and contract documentation.</p> <p>Coordinate contract tendering, bid evaluations, technical assessments, and contractor selection processes.</p> <p>Monitor contract performance against agreed KPIs, deliverables, and service levels.</p> <p>Manage contract variations, claims, extensions, and contract close-out activities.</p> <p>Maintain accurate contract records, correspondence, and commercial documentation.</p> <p>Ensure all contracts are administered in accordance with company procurement and governance procedures.</p> <p>Use SAP for resource planning and manning</p> <p>Generate Power BI reports for contracts administration</p> <p>CONTRACTOR PERFORMANCE MANAGEMENT</p> <p>Monitor contractor performance, productivity, and compliance with contractual requirements.</p> <p>Conduct regular contractor performance reviews and KPI assessments.</p> <p>Coordinate contractor mobilization and demobilization activities.</p> <p>Support development and implementation of contractor improvement plans where required.</p> <p>Ensure contractor resources meet operational, technical, and safety requirements.</p> <p>Maintain effective working relationships with contractors, suppliers, and external service providers.</p> <p>PROCUREMENT &amp; COMMERCIAL SUPPORT</p> <p>Work closely with Procurement and Maintenance teams to support sourcing of maintenance services and contracts.</p> <p>Participate in commercial and technical evaluations of contractor bids and proposals.</p> <p>Support contract negotiations, renewals, and service level agreements.</p> <p>Review contractor invoices and verify work completion in accordance with contract terms.</p> <p>Assist in the preparation of budget estimates and cost forecasts related to maintenance contracts.</p> <p>Identify opportunities for cost optimization and value improvement while maintaining service quality.</p> <p>MAINTENANCE SUPPORT COORDINATION</p> <p>Coordinate with maintenance planners, supervisors, and operations teams to ensure contracted services are delivered effectively.</p> <p>Support execution of planned maintenance, shutdowns, and special projects through contractor coordination.</p> <p>Ensure timely availability of external specialist services and OEM support.</p> <p>Facilitate communication between contractors and site stakeholders.</p> <p>Monitor contractor resource allocation to support maintenance objectives.</p> <p>SHUTDOWN &amp; PROJECT CONTRACT SUPPORT</p> <p>Support contract planning and administration activities for shutdowns, turnarounds, and major maintenance projects.</p> <p>Coordinate contractor readiness reviews, resource planning, and mobilization requirements.</p> <p>Monitor contractor performance during shutdown execution.</p> <p>Assist with post-shutdown contract evaluations and lessons learned reviews.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop and maintain contract performance reports and dashboards.</p> <p>Monitor and report key performance indicators, including:</p> <p>Contractor Performance</p> <p>Service Level Compliance</p> <p>Contract Utilization</p> <p>Cost Performance</p> <p>Contractor Safety Performance</p> <p>Invoice Processing Efficiency</p> <p>Prepare periodic reports for management on contract status and performance.</p> <p>Analyze trends and recommend improvement opportunities.</p> <p>SAFETY, QUALITY &amp; COMPLIANCE</p> <p>Ensure contractors comply with company health, safety, environmental, and quality requirements.</p> <p>Participate in contractor safety audits, inspections, and risk assessments.</p> <p>Verify contractor compliance with permit-to-work systems and site procedures.</p> <p>Support incident investigations involving contractors and ensure corrective actions are implemented.</p> <p>Promote a strong safety culture and adherence to company standards.</p> <p>STAKEHOLDER MANAGEMENT</p> <p>Maintain effective relationships with internal stakeholders, contractors, suppliers, and service providers.</p> <p>Provide contract-related advice and support to Maintenance, Procurement, Finance, and Operations teams.</p> <p>Support development and implementation of contract management best practices.</p> <p>Participate in continuous improvement initiatives to enhance contract performance and operational efficiency.</p> <p>COST CONTROL &amp; BUDGET MANAGEMENT</p> <p>Monitor maintenance contract expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Review cost trends and identify opportunities for savings.</p> <p>Support annual budgeting and forecasting activities for maintenance contracts.</p> <p>Ensure accurate cost allocation and reporting for contracted services.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> </p> <p> Bachelor s degree or Higher Diploma</p> <p> </p> <p>Experience: </p> <p> Bachelor s degree with 7+ years or Higher Diploma with 10+ years of maintenance planning, shutdown planning, contracts administration, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and contractor management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> </p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<p><b>Brief Posting Description </b></p> <p>The Planning Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, and maintenance control processes to ensure safe, reliable, and efficient plant operations.This role supports leadership in maintenance planning and resource coordination, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p>Detailed Description </p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p>Develop and implement maintenance planning and scheduling processes.</p> <p>Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p>Review work requests and convert approved work into executable job plans.</p> <p>Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p>Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p>Monitor schedule compliance and planning effectiveness.</p> <p>Ensure maintenance backlogs are effectively managed and prioritized.</p> <p>Support development of maintenance strategies for critical equipment.</p> <p>Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p>Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p>Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p>Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p>Manage maintenance work management processes within ERP/CMMS systems.</p> <p>Ensure work order quality, data accuracy, and system compliance.</p> <p>Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p>Monitor key work management KPIs.</p> <p>Maintain planning and scheduling standards across all maintenance disciplines.</p> <p>Ensure historical maintenance records are maintained for reliability analysis.</p> <p>Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p>Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p>Develop integrated shutdown schedules and resource plans.</p> <p>Coordinate labor, equipment, materials, and contractor requirements.</p> <p>Monitor shutdown planning milestones and readiness reviews.</p> <p>Support execution teams during shutdown implementation.</p> <p>Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p>Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop maintenance planning and execution performance dashboards.</p> <p>Monitor KPIs including:</p> <p>Schedule Compliance</p> <p>PM Compliance</p> <p>Backlog Management</p> <p>Work Order Closure Rates</p> <p>Contractor Performance</p> <p>Maintenance Cost Performance</p> <p>Shutdown Performance</p> <p>Prepare weekly and monthly maintenance performance reports.</p> <p>Analyze trends and recommend improvement initiatives.</p> <p>Support annual maintenance budgeting and forecasting processes.</p> <p>CONTRACTOR &amp; RESOURCE MANAGEMENT</p> <p>Coordinate with contract administrator for mobilization and demobilization activities.</p> <p>Evaluate contractor performance and productivity.</p> <p>Ensure contractors comply with safety, quality, and environmental requirements.</p> <p>Optimize utilization of labor, equipment, and maintenance resources.</p> <p>Coordinate external specialist services and OEM support.</p> <p>LEADERSHIP &amp; TEAM MANAGEMENT</p> <p>Lead maintenance planners, schedulers from Contractors</p> <p>Develop workforce capability and succession plans.</p> <p>Promote a culture of accountability, collaboration, and continuous improvement.</p> <p>Ensure departmental objectives align with maintenance business goals.</p> <p>SAFETY &amp; COMPLIANCE</p> <p>Ensure compliance with company safety policies and procedures.</p> <p>Participate in risk assessments and shutdown safety planning.</p> <p>Ensure contractor compliance with permit-to-work and site safety requirements.</p> <p>Support incident investigations and corrective action implementation.</p> <p>Promote safe work practices and zero-harm objectives.</p> <p>BUDGET &amp; COST CONTROL</p> <p>Support preparation of annual maintenance budgets.</p> <p>Monitor maintenance expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Identify cost optimization opportunities without compromising reliability.</p> <p>Support spare parts and inventory management strategies.</p> <p>Provide cost forecasting and budget variance analysis.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field</p> <p><b>Experience: </b></p> <p> 10+ years of maintenance planning, shutdown planning, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and resources management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirabl</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Practitioner (CMRP)</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p> Maintenance Planning and Scheduling</p> <p> Work Management Systems</p> <p> Shutdown and turnaround planning</p> <p> SAP PM</p> <p> Budgeting and Cost Control</p> <p> Resource Planning</p> <p> Procurement Processes</p> <p> Contractor Performance Management</p> <p> Maintenance KPI Reporting and Analysis</p> <p> Inventory and Spare Parts Management</p> <p> Risk Management</p> <p>Soft Skills: </p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical &amp; Instrumentation Engineering is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p><br></p>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<p>Evaluates mechanical and electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials. Product capabilities by designing feasibility and testing methods. Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; soliciting observations from operators. Planning and designing new production processes Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Designing and implementing cost-effective equipment modifications to help improve safety and reliability and Developing, testing and evaluating theoretical designs; Developing a project specification, often including those from other engineering disciplines; Discussing and solving complex problems with manufacturing departments, sub-contractors, suppliers and customers. Managing projects using engineering principles and techniques Using research, analytical, conceptual and planning skills, particularly mathematical modelling and computer-aided design. Recommending modifications following prototype test results Working with other professionals, within and outside the engineering sector</p><p><strong>Desired Candidate Profile</strong></p><p>Strong written and verbal communication skills Planning and organizational skills, such as time and resource allocation &amp; commercial awareness Knowledge of Design Software, Strong initiative and Excellent problem solving skills. Experience of 5-8 years in Design and supervision of services for Buildings and Infrastructure</p>

<p>Responsibilities: Collaborate with production team on equipment optimization Ensure compliance with safety standards during maintenance activities Maintain pharmaceutical machinery, HVAC systems &amp; chillers</p>

<p>Responsible for configuration, maintenance, and optimization of SCADA systems used for monitoring and control of wastewater treatment plants, lifting stations, and associated infrastructure, ensuring system reliability, accurate alarm management, and operational efficiency.</p><p>Configure and maintain SCADA servers, clients, and historian systems. Develop and update HMI screens, trends, and reporting dashboards. Implement alarm configuration, rationalization, and performance optimization. Integrate new PLCs/RTUs and field devices into the SCADA system. Perform system backups, patching coordination, and version control. Support FAT, SAT, commissioning, and system upgrades. Ensure data integrity and accuracy for operational and regulatory reporting. Provide technical support to operations and maintenance teams. Perform any other duties assigned by NDS Management as required.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Electrical, Instrumentation, or Control Engineering. Minimum 8 years of experience in SCADA system configuration and maintenance within industrial environments (water/wastewater preferred). Experience in PLC/RTU integration and industrial communication protocols. Familiarity with Windows Server environments, virtualization, and SCADA redundancy setups.</p><p>Preferred Certifications: Project-specific SCADA platform certification PLC programming certification ISA training (ISA-95 / ISA-99 awareness)</p>