وظائف مهندس تصميم ميكانيكي في سلطنة عمان

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Drawings &amp; Designs is responsible for the development, management, control, and continuous improvement of all engineering drawings, technical documentation, plant design records, and engineering change processes across the mining and processing operations. The role ensures that all engineering drawings, as-built documentation, layouts, schematics, and design data are accurate, current, compliant with applicable engineering standards, and readily available to support safe, reliable, and efficient operation of plant assets. The position provides technical leadership for engineering design activities, drawing management systems, plant modifications, engineering change management (MOC), document control coordination, multidisciplinary design reviews, and digital engineering initiatives. The role supports maintenance, operations, projects, shutdowns, and capital development activities by ensuring engineering documentation integrity and effective design governance throughout the asset lifecycle.</p> <p> </p> <p><b>Detailed Description </b></p> <p>DRAWINGS AND DESIGN MANAGEMENT</p> <p>Develop, review, and manage engineering drawings including mechanical, structural, piping, electrical, instrumentation, civil, architectural, and process drawings.</p> <p>Ensure all engineering drawings are maintained accurately and updated to reflect plant modifications and as-built conditions.</p> <p>Establish and maintain engineering drawing standards, drafting procedures, templates, and design guidelines.</p> <p>Ensure consistency and compliance with applicable international standards, company requirements, and OEM specifications.</p> <p>Coordinate multidisciplinary drawing reviews and approvals prior to implementation of modifications.</p> <p>Maintain master drawing registers and document history records.</p> <p>Ensure obsolete drawings are withdrawn and controlled in accordance with document management procedures.</p> <p>Support digitalization initiatives involving engineering document management and drawing systems.</p> <p>ENGINEERING DESIGN AND MODIFICATIONS</p> <p>Lead and coordinate engineering design activities for plant upgrades, asset improvement initiatives, debottlenecking projects, and operational modifications.</p> <p>Prepare conceptual, basic, and detailed engineering designs.</p> <p>Develop engineering calculations, technical specifications, scopes of work, and equipment layouts.</p> <p>Conduct feasibility studies and technical evaluations for proposed modifications.</p> <p>Ensure designs achieve required safety, operability, maintainability, reliability, and cost objectives.</p> <p>Coordinate engineering deliverables with Operations, Maintenance, Reliability, Projects, and external consultants.</p> <p>Participate in design verification and interdisciplinary design reviews.</p> <p>Ensure engineering designs consider lifecycle cost optimization and long-term asset sustainability.</p> <p>MANAGEMENT OF CHANGE (MOC)</p> <p>Manage engineering aspects of the Management of Change process.</p> <p>Review and evaluate proposed modifications and technical changes.</p> <p>Ensure all design changes are supported by appropriate engineering documentation and risk assessments.</p> <p>Coordinate updating of drawings, technical documents, procedures, and asset records following approved changes.</p> <p>Verify implementation of approved modifications and completion of as-built documentation.</p> <p>Ensure engineering changes comply with statutory, safety, environmental, and operational requirements.</p> <p>ENGINEERING DOCUMENT CONTROL</p> <p>Maintain engineering document control systems and technical databases.</p> <p>Ensure proper filing, numbering, distribution, revision control, and archiving engineering documents.</p> <p>Manage controlled copies of plant drawings and technical records.</p> <p>Coordinate document reviews and approvals with engineering disciplines and stakeholders.</p> <p>Ensure document accessibility for maintenance, operations, projects, and regulatory requirements.</p> <p>Support audits by ensuring engineering records and documentation are accurate and available.</p> <p>PLANT LAYOUTS AND AS-BUILT MANAGEMENT</p> <p>Develop and maintain plant general arrangement drawings, equipment layouts, utility plans, and site infrastructure drawings.</p> <p>Coordinate field verification activities to ensure drawing accuracy.</p> <p>Conduct plant surveys and document existing conditions where required.</p> <p>Ensure timely preparation and updating of as-built drawings following project completion.</p> <p>Establish processes for maintaining plant configuration integrity.</p> <p>Support operational and maintenance teams through provision of accurate plant data and layouts.</p> <p>PROJECTS AND CAPITAL DEVELOPMENT SUPPORT</p> <p>Support capital projects through engineering design development and drawing preparation.</p> <p>Review consultant and contractor engineering deliverables.</p> <p>Participate in project scope development, technical reviews, and constructability assessments.</p> <p>Ensure project designs integrate effectively with existing facilities.</p> <p>Coordinate engineering deliverables during project execution and commissioning activities.</p> <p>Support handover processes and verification of final project documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering/production engineering or CAD/CAM engineering or equivalent</p> <p><b>Experience: </b></p> <p> Bachelor s degree with 15+ years experience in designs and drafting mechanical structures and mechanical equipment in mining, minerals processing, or heavy industrial operations.</p> <p> Experience in CAD/CAM, SolidWorks or equivalent design software</p> <p> Minimum 5 years in a senior engineering, design coordination, or technical authority role.</p> <p>Certifications: Candidate must have followed certification</p> <p> Certified AutoCAD Professional or equivalent CAD Design Certification.</p> <p>Following certifications added advantage</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Certified Maintenance and Reliability Professional (CMRP).</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Autodesk Certified Professional (ACP) or equivalent advanced CAD certification.</p> <p><br></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Goodman Masson is partnering with a new financial markets infrastructure venture under formation in Oman.<br> Backed by prominent institutional investors, the business is building a greenfield platform from the ground up, and is now hiring at the build stage.<br> This is a rare chance to help stand up critical market infrastructure from a blank sheet and then run what you have built.<br> The role The Network and Security Engineer builds and looks after the network the platform runs on, and keeps it secure at the same time.<br> In the build phase you help design and then stand up the network from the ground up.<br> In the run phase you keep it working, watch it, and fix it when something breaks.<br> What you will do Help design and then build the network: segmentation and zoning, routing and switching, firewalls, load balancing, DNS, and time synchronisation, engineered for steady low-latency performance Set up and secure connectivity to external counterparties such as custodians, settlement banks, and market systems Own perimeter and internal network security in the first line: firewalls, segmentation, secure and privileged remote access, and certificate and encryption management Keep network devices patched and hardened, support penetration testing, and close network findings Lead the first response to network and security incidents, and escalate cleanly when needed Keep the network documented to a standard that holds up under review Location and terms Based in Muscat, Oman.<br> Permanent for Omani nationals; two-year fixed-term contract for expatriate hires.<br> Omani nationals are strongly encouraged to apply.<br> If this is your kind of build, please apply now!<br> What you will bring Degree in computer science, networking, information security, or a related field, or equivalent hands-on experience At least six years in network engineering, with direct hands-on responsibility for network security as well as the network itself Strong network design and operation: segmentation and zoning, routing and switching, firewalls, load balancing, secure remote access, and low-latency design Direct experience owning first-line network security including firewalls, hardening, certificates, and secure connectivity Experience securing external-facing connectivity in a regulated or high-assurance setting Experience leading the first response to a live network or security incident Hands-on credibility: able to configure a firewall and a switch, segment a network, read a packet capture, and challenge a vendor design Fluent English, written and spoken Also of interest Experience in financial services or financial market infrastructure such as a central securities depository, central counterparty, exchange, or payment system Experience with secure connectivity to SWIFT, Bloomberg, or the international central securities depositories Infrastructure-as-code and automation experience such as Terraform or Ansible Relevant certifications in networking such as CCNP or CCIE, and in security such as CISSP</span> </div>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><br></p><p>Below are the open positions:</p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Mechanical Engineering.</li><li>8+ years of experience in Estimation &amp; Proposal writing</li><li>Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</li><li>Strong knowledge of international codes and standards</li><li>Familiarity with local construction codes and regulations.</li><li>Working knowledge of PDO, OQ, and Oxy specifications.</li><li>Experience in contract processing and contract management.</li><li>GCC / Oman experience is a must</li></ul>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p>Act as technical authority for WTG erection activities. Supervise unloading, storage,</p><p>preservation, assembly and installation of turbine components. Coordinate crane</p><p>operations and heavy lifts for tower sections, nacelles, hubs and blades. Ensure</p><p>compliance with OEM procedures, quality requirements and HSE standards. Manage</p><p>subcontractors and interfaces with civil, electrical and commissioning teams. Support</p><p>mechanical completion, punch-list clearance and handover.</p><ol><li><p>Minimum Experience Requirements</p></li></ol><p>Minimum 8-10 years in industrial construction. Minimum 8 years dedicated to wind</p><p>turbine erection projects. Proven experience on wind farms above 300 MW.</p><p>Demonstrated involvement from construction through commissioning and COD.</p><p>Experience with international EPC contractors and OEM turbine suppliers.</p><ol><li><p>Preferred OEM Experience</p></li></ol><p>Candidates with hands-on experience in Vestas, Siemens Gamesa, GE Vernova,</p><p>Nordex, Enercon, Goldwind or Sany technologies shall be prioritized.</p><ol><li><p>Technical Competencies</p></li></ol><p>WTG erection methodology; tower installation; nacelle installation; blade mounting; bolt</p><p>tensioning; hydraulic torque equipment; alignment and leveling; lifting studies; heavy</p><p>crane operations; turbine preservation; mechanical inspections; quality dossiers; turbine</p><p>commissioning support; punch-list management; defect identification and rectification;</p><p>work packaging and construction sequencing.</p><ol><li><p>Construction and Project Management</p></li></ol><p>Management of subcontractors, daily progress monitoring, look-ahead planning,</p><p>resource allocation, productivity tracking, interface management, schedule recovery</p><p>actions, risk management and reporting to project management teams.</p><ol><li><p>HSE Requirements</p></li></ol><p>Strong leadership in lifting operations, work at height, rescue plans, permit to work</p><p>systems, lock-out tag-out procedures, risk assessments, toolbox talks and zero-harm</p><p>safety culture. Candidate must demonstrate a proactive safety leadership record.</p><ol><li><p>Qualifications</p></li></ol><p>Bachelor Degree in Mechanical Engineering or related discipline. English proficiency</p><p>B2/C1. Ability to work in remote locations and rotational assignments. Wind industry</p><p>certifications and GWO training are highly desirable.</p><ol><li><p>Geographic Experience</p></li></ol><p>Experience in international utility-scale wind projects is preferred. Middle East, Europe,</p><p>Latin America, Asia-Pacific and Africa wind farm experience will be considered</p><p>advantageous.</p><p><strong>Desired Candidate Profile</strong></p><p>This document defines the minimum and preferred recruitment requirements for hiring a Senior Wind Turbine Erection Engineer responsible for planning, supervision, erection, installation, quality control, mechanical completion and commissioning support of utility scale wind turbine generators (WTG). The role is intended for , Owners Engineers and Owner Representatives involved in onshore and offshore wind projects.</p>

<p><strong>Job Summary:</strong> Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience Product Engineer supports the Sales and Operations goals by providing technical support as requested to enable the segment to plan, design, execute and evaluate SLB products and services we provide to our Clients. A principal role of the Product Engineer is to ensure that our products are competitive and reliable in the market and that we understand the performance expectations and make up of that market. The Product Engineer should have the capability to design bit based on the inputs of the formation evaluation /offset wells/ Temp profile/UCS /geomechanics and other main inputs . The role is responsible for communicating the technical differentiation of our various drilling products and services over those of the competition in the field. The Product Engineer understands both the technology and its value and is a technical bridge between the client organization and the segment. The Product Engineer is the enabler and driver of new technology opportunities through solution-driven client and engineering engagement. The Product Engineer should provide flawless Service Quality and ensure compliance with all SLB Standards.</p><p><strong>Essential Responsibilities and Duties:</strong></p><p><strong>Technical Sales Support:</strong> Provides technical support to the sales organization and to clients. Assist with Engineering prototype applications and New Technology (NT) market introductions Drive New Technology (NT) sales and provides technical sales support for opportunities identified by front line sales team in the location. Perform internal and external marketing activities such as technology presentations, lunch and learns, workshops, and technology launches. Develop appropriate relationships with key senior technical personnel within the client s organization by becoming a Technical Reference/Advisor.</p><p><strong>Application Analysis and Sales Development:</strong> Analyze, benchmarks and evaluates product performance to ensure a competitive position is maintained and initiates new or modified design requests to meet the operational goals of the geography Assist with field based Applications Analysis (modeling &amp; simulation) to enable Operations to effectively sell our Products and Services with a differentiable advantage. Deliver Real-Time parameter monitoring as required to support execution.</p><p><strong>Technical Leadership:</strong> Create Technical Papers, Case Studies and capture Lessons Learned into InTouch based on the experiences of the GeoMarket or location. Be active in Technical Society through publishing of technical papers, participating in SLB Symposia, participating in Industry events. Contribute to the competency development of the Engineering Support group while mentoring and coaching less experienced engineers in the location.</p><p><strong>Q&amp;HSE:</strong> Investigate unusual or unsatisfactory product performance to rapidly determine root cause and preventative action. Participate in internal product quality reviews with Reliability, Engineering and Sustaining. Communicate PQ Root Cause Analysis and preventative action outcomes to customers as requested by Sales. Conduct audits and inspections as requested or scheduled. Complies with all Company &amp; Regulatory HS&amp;E &amp; Quality and IT standards and policies. Wears all Personal Protective Equipment (PPE) as required &amp; maintains required HS&amp;E &amp; SQ certifications up-to-date.</p><p><strong>Formal Job Training Covering the below Topics:</strong></p><ul><li>Technical Job Design &amp; execution for retrievable and directional casing drilling</li><li>Technical Job Design &amp; execution or non-directional casing drilling</li><li>Turbodrilling technical job design and execution for hard drilling rocks</li><li>Technical Bore Hole Enlargement for Job designing and troubleshooting</li><li>Technical Bore Hole Enlargement for operation and execution</li><li>Cross Training sales for Fishing and Remedial tools</li><li>Cross training sales for Wellbore departure and whipstocks tools</li><li>Cross Training sales for impact jars and shock subs</li><li>Cross Training sales for Bore hole enlargement</li><li>Drilling Bits</li><li>Product development and Advanced Drilling Engineering</li></ul><p><strong>Behavior:</strong></p><ul><li>Relationship builder Internally and with Clients</li><li>Strong verbal and written communicator</li><li>Team player</li><li>Innovative</li><li>Objective</li><li>Leader</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience</p>

<p>The Senior Software Engineer designs, develops, implements, and supports secure, scalable, and high-quality software solutions that enable the Bank's digital products and technology services. He/She leads the delivery of complex software initiatives, establishes engineering best practices, ensures operational excellence, and collaborates with cross-functional teams to deliver reliable, maintainable, and high-performing technology solutions.The Senior Software Engineer promotes engineering excellence by driving software quality, automation, technical innovation, secure development practices, and continuous improvement while mentoring engineers and contributing to the Bank's technology transformation initiatives. Key Accountabilities: Mentors and coaches software engineers through technical guidance, knowledge sharing, design reviews, and continuous professional development. Drives continuous improvement by identifying opportunities to optimize software architecture, development processes, automation, operational efficiency, and technology practices. Maintains technical documentation, development standards, operational procedures, and knowledge repositories to support sustainable application lifecycle management. Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks. Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered.</li><li>Minimum of 6 years of professional software engineering experience, including experience designing, developing, and supporting production-grade applications and services.</li><li>Demonstrated experience delivering scalable enterprise software solutions across the full software development lifecycle.</li><li>Strong experience with one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies.</li><li>Experience developing and supporting RESTful APIs, microservices, distributed applications, and modern software architecture.</li><li>Experience with relational databases, data modelling, API integration, application performance optimization, and cloud-native application development.</li><li>Experience with CI/CD pipelines, DevOps practices, containerization technologies, Infrastructure as Code (IaC), and cloud platforms such as OCI, AWS, Azure, or Google Cloud.</li><li>Knowledge of software engineering best practices including version control, automated testing, secure coding, code reviews, and release management.</li><li>Experience developing or supporting Artificial Intelligence, machine learning, or intelligent automation solutions is preferred.</li></ul>

<p>The Senior Software Engineer designs, develops, implements, and supports secure, scalable, and high-quality software solutions that enable the Bank's digital products and technology services. He/She leads the delivery of complex software initiatives, establishes engineering best practices, ensures operational excellence, and collaborates with cross-functional teams to deliver reliable, maintainable, and high-performing technology solutions.The Senior Software Engineer promotes engineering excellence by driving software quality, automation, technical innovation, secure development practices, and continuous improvement while mentoring engineers and contributing to the Bank's technology transformation initiatives. Key Accountabilities: Mentors and coaches software engineers through technical guidance, knowledge sharing, design reviews, and continuous professional development. Drives continuous improvement by identifying opportunities to optimize software architecture, development processes, automation, operational efficiency, and technology practices. Maintains technical documentation, development standards, operational procedures, and knowledge repositories to support sustainable application lifecycle management. Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks. Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered. Minimum of 6 years of professional software engineering experience, including experience designing, developing, and supporting production-grade applications and services. Demonstrated experience delivering scalable enterprise software solutions across the full software development lifecycle. Strong experience with one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies. Experience developing and supporting RESTful APIs, microservices, distributed applications, and modern software architecture. Experience with relational databases, data modelling, API integration, application performance optimization, and cloud-native application development. Experience with CI/CD pipelines, DevOps practices, containerization technologies, Infrastructure as Code (IaC), and cloud platforms such as OCI, AWS, Azure, or Google Cloud. Knowledge of software engineering best practices including version control, automated testing, secure coding, code reviews, and release management. Experience developing or supporting Artificial Intelligence, machine learning, or intelligent automation solutions is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span>Senior Civil Engineer</span></span></p><br><p><span><span>Minimum 12 years of experience in oil and gas industry</span></span></p><br><p><span><span>Familiar with international structural codes and standards</span></span></p><br><p><span><span>Experience in Structural design using STAAD etc</span></span></p><br><p><span><span>Experience in design of Platforms, pipe racks</span></span></p><br><p><span><span>Experience in structural building designs (Shelters, Warehouses etc.)</span></span></p><br><p><span><span>5 years of experience on site construction&nbsp;</span></span></p><br> <p>Degree in Civil Engineering</p><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As part of the technical team, responsible for ensuring the most competitive and appropriate cable designs for each situation, considering OCI s needs and capabilities, and the customers needs. Summary of the Job Role : Design cables in accordance with the parameters provided by applicable standards, customers and OCI. To support OCI s strategic goals and tendering, provide customer support and support Production. Key Deliverables to and through the Head of Department : PRE ORDER Cooperate with the marketing team in responding timeously to customer enquiries for cables. Understand the technical requirements of the customer in terms of cable and design the cable as per requirements. Analyse the customer needs to understand the requirements as per OCI technical feasibility and provide feedback to marketing team accordingly. Identify all aspects requiring clarification and participate in technical communications and meetings with customers to ensure the customers needs can be met and will be met. Prepare raw material specifications as and when required. You will be responsible to provide the technical data sheets as and whenever required by customers. Prepare and upload the design sheets / BOMs for the raw materials required for production of cable in the ERP for the use of financial and marketing teams. Coordinate with R&amp;D for all development, and with QC for additional testing that may be required. Ensure daily activities are distributed to team members. Risk assessment &amp; mitigation. Design calculations CYMCAP, Cable Sizing, Ampacity, Short Circuit Rating etc. POST ORDER Perform Contract review after order confirmation to clarify and finalize through marketing department any ambiguities in the purchase orders. Prepare the CA Family, Item codes &amp; CMS (Cable Manufacturing Specification) as per the purchase order and transfer the information to production team to for final production. Generate the information needed for the MES as and when required. You will be responsible review the CMSs prepared by Design Engineers before sending it to production. Prepare designs in a format suitable for driving the MES. Work with New Product Development team, Material &amp; Lab teams, Operation &amp; Procurement team. Take lead on CSI, DTC &amp; Sustainability activities. Substitute managers responsibility as and when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree or diploma in electrical engineering.</li><li>Must have knowledge of MS Office, AutoCAD, SolidWorks &amp; CYMCAP.</li><li>Must have knowledge of Fictitious calculation &amp; Bill of Material calculation for LV, MV &amp; Instrumentation cables.</li><li>Must have understanding about cable manufacturing &amp; design for various cables like LV, MV &amp; Instrumentation cables as per IEC, BS, HD, AUS/NZ standards.</li><li>Attention for details &amp; analytical skills.</li><li>Strong Communication skills &amp; collaboration skills in an internation.</li><li>Ability to work independently &amp; perform well under-pressure.</li><li>Decision making &amp; team player.</li><li>Degree: 3+ years of experience as a power cable design engineer.</li><li>Diploma: 5+ years of experience as a power cable design engineer.</li><li>Knowledge of costing software.</li><li>Knowledge of software for cable designing.</li><li>Knowledge of cables used for Oil &amp; Gas, Power Grids and Renewable.</li><li>Study &amp; analyzing cable market trends.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p>job description:&nbsp;</p><br><p>The role requires an individual with strong knowledge and hands-on experience in: &nbsp;• " Electrical engineering fundamentals and design principles&nbsp;• " Project scope development and execution strategies&nbsp;• " Identification and mitigation of engineering concerns&nbsp;• " Coordination of multidisciplinary project activities The engineer must be&nbsp;capable of independently handling technical responsibilities and contributing&nbsp;effectively from the outset, minimizing the learning curve. &nbsp;• Manage all electrical engineering activities within OQEP.&nbsp;• " Review and approve all EPC Consultants or consultants’ electrical design.&nbsp;• " Prepare, check and approve all electrical engineering deliverables.&nbsp;• " Assuring that work and project promises are successfully delivered and&nbsp;appropriate reviews have been conducted. &nbsp;• " Involvement in Feasibility Studies.• " Plan &amp; Propose implementation of new technology.&nbsp;• " Attending equipment tests/design reviews with vendors inside/outside the&nbsp;country. &nbsp;• " Manage staff and 3rd party activities&nbsp;• " Development of local young engineers and providing development programs.&nbsp;• " Participating in Developing Tender Specifications.&nbsp;• " Participating in Tender Clarification and Evaluation.&nbsp;• " Participating, closing action items and approving reports from Electrical&nbsp;reviews &nbsp;</p><br> *minimum 8 years of experience in Oil&amp; Gas&nbsp;<br>*Bachelor degree in Electrical or any related certificate &nbsp;<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities Review and validate SCADA design documents, control philosophy, and I/O lists against contract specification and client requirements Supervise installation of RTUs, PLCs, HMI panels, and instrumentation across all project sites Configure and commission SCADA software, communication networks (radio, fibre, GSM/GPRS), and historian systems Coordinate with civil, mechanical, and electrical teams to sequence SCADA works against the overall construction programme Manage subcontractors and vendors supplying SCADA hardware and integration services Conduct FAT and SAT for control panels and integrated systems Prepare and execute loop testing, functional testing, and pre-commissioning checklists Interface with the Supervising Engineer on inspection and approval of SCADA works Maintain as-built drawings, control narratives, and O&amp;M documentation for handover Support RFI resolution on SCADA and instrumentation queries Train client operations staff on system use ahead of taking over</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Work share project execution experience.</li><li>Knowledge of national/international electrical codes and standards.</li><li>Rich knowledge and experience in specifications, selection, design and engineering of DCS/ESD/PLC/SCADA systems, including FF technology.</li><li>Hands-on experience in developing &amp; modification of plc logics and SCADA screens as per the requirements</li><li>Good knowledge of HAZOP/SIL study, including SIL calculation</li><li>Hands-on experience of FAT (Factory Acceptance Test) of various systems like DCS/ESD/SCADA/PLC, etc.</li><li>Sizing of Various instrument items like flow element, control valve, safety relief valve, wake frequency of thermo-well, etc.</li><li>FF Segment Calculation and design</li><li>Hands-on experience in handling instrumentation of critical packages like compressors, blowers, fire heaters, turbines, etc.</li><li>Detailed engineering to develop various instrumentation layouts and MT</li><li>Detailed engineering to develop various instrumentation documents like Logic Diagram, Control Narrative, Instrumented Protection Function Narratives, wiring connection details and loop diagrams</li><li>Manpower Planning, Scheduling, Cost Control skills</li><li>Ability to interact with other design groups in the office.</li><li>Excellent oral and written communication skills in English.</li><li>Compliance with budget, schedule and quality within allocated resources.</li><li>Vast work experience in Instrumentation Engineering and Design for Oil and Gas Industries, Petroleum and Refinery Units, chemical/Petrochemical/ Fertilizer plants, etc.</li><li>Good Experience in handling projects like developing Front End Engineering &amp; Design (FEED) Packages, executing Detailed Engineering services on an EPCM basis and PMC services</li><li>Experience as Team Leader</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Purpose</u></b><b>:</b></p><br><p>As part of the technical team, responsible for ensuring the most competitive and&nbsp;appropriate cable designs for each&nbsp;situation, considering OCI’s needs and&nbsp;capabilities, and the customers’ needs.</p><br><p><b><u>Summary of the Job Role</u></b><b>:</b></p><br><ul><li>Design cables in accordance with the&nbsp;parameters provided by applicable&nbsp;standards, customers and OCI.&nbsp;</li><li>To support OCI’s strategic goals and&nbsp;tendering, provide customer support and&nbsp;support Production.&nbsp;</li></ul><p><b><u>Key Deliverables – to and through the Head of Department</u></b><b>:</b></p><br><p><b><u>PRE ORDER</u></b></p><br><ul><li>Cooperate with the marketing team in responding timeously to customer enquiries for cables.</li><li>Understand the technical requirements of the customer in terms of cable and design the cable as per requirements.</li><li>Analyse the customer needs to understand the requirements as per OCI technical feasibility and provide feedback to marketing team accordingly.</li><li>Identify all aspects requiring clarification and participate in technical communications and meetings with customers to ensure the customers’ needs can be met and will be met.</li><li>Prepare raw material specifications as and when required.</li><li>You will be responsible to provide the technical data sheets as and whenever required by customers.</li><li>Prepare and upload the design sheets / BOMs for the raw materials required for production of cable in the ERP for the use of financial and marketing teams.</li><li>Coordinate with R&amp;D for all development, and with QC for additional testing that may be required.</li><li>Ensure daily activities are distributed to team members.</li><li>Risk assessment &amp; mitigation.</li><li>Design calculations– CYMCAP, Cable Sizing, Ampacity, Short Circuit Rating etc.</li></ul><p><b><u>POST ORDER</u></b></p><br><ul><li>Perform Contract review after order confirmation to clarify and finalize through marketing department any ambiguities in the purchase orders.</li><li>Prepare the CA Family, Item codes &amp; CMS (Cable Manufacturing Specification) as per the purchase order and transfer the information to production team to for final production.</li><li>Generate the information needed for the MES as and when required.</li><li>You will be responsible review the CMSs prepared by Design Engineers before sending it to production.</li><li>Prepare designs in a format suitable for driving the MES.</li><li>Work with New Product Development team, Material &amp; Lab teams, Operation &amp; Procurement team.</li><li>Take lead on CSI, DTC &amp; Sustainability activities.</li><li>Substitute managers responsibility as and when required.</li></ul><p><b><u>Qualifications</u></b><b>:</b></p><br><ul><li>Bachelor’s degree or diploma in electrical engineering.&nbsp;&nbsp;</li></ul><p><b><u>Skills/Knowledge</u></b><b>:</b></p><br><ul><li>Must have knowledge of MS Office, AutoCAD, SolidWorks &amp; CYMCAP.</li><li>Must have knowledge of Fictitious calculation &amp; Bill of Material calculation for LV, MV &amp; Instrumentation cables.</li><li>Must have understanding about cable manufacturing &amp; design for various cables like LV, MV &amp; Instrumentation cables as per IEC, BS, HD, AUS/NZ standards.</li><li>Attention for details &amp; analytical skills.</li><li>Strong Communication skills &amp; collaboration skills in an internation.</li><li>Ability to work independently &amp; perform well under-pressure.</li><li>Decision making &amp; team player.</li></ul><p><b><u>Experience</u></b><b>:</b></p><br><ul><li>Degree: 3+ years of experience as a power cable design engineer.&nbsp;</li><li>Diploma: 5+ years of experience as a power cable design engineer.</li></ul><p><b><u>Business Understanding</u></b><b>:</b></p><br><ul><li>Knowledge of costing software.</li><li>Knowledge of software for cable designing.</li><li>Knowledge of cables used for Oil &amp; Gas, Power Grids and Renewable.</li><li>Study &amp; analyzing cable market trends.</li></ul><p><i><span>Prysmian , as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&amp;I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. </span></i></p><br><p><br><i><span>All Managers and HRs in Prysmian are responsible for ensuring DE&amp;I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business.</span></i></p><br><p><i>Visit our DE&amp;I Page to</i><i> learn more about Prysmian's commitments.</i></p><br><p>Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please let us know.</p><br> </div>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>