وظائف مهندس كهرباء في سلطنة عمان

<p>Duties and responsibilities:</p><p>Monitoring site work according to drawings and specifications.</p><p>Supervising workers and laborers in daily work chaos.</p><p>Monitoring the quality of execution and quantity surveying; drawing is not required.</p><p>Coordinating with project management, the consultant, and contractors.</p><p>Preparing daily work reports and following up on results.</p><p>Adherence to safety instructions and professional conduct within the site.</p><p>Required qualifications:</p><p>Previous experience in contracting and finishing works.</p><p>Proficiency in reading drawings and quantity surveying.</p><p>Ability to manage labor and organize tasks.</p><p>Commitment, discipline, and ability to handle work pressure.</p>

<p><strong>Maintenance Management</strong> Executes work order through CMMS (SAP) and coordinates with maintenance engineer for job completion and technical matters. Apply technical craft, techniques, processes and principles and be responsible for all necessary preparation required to carry out mechanical maintenance to equipment/area assigned to him. Report to Maintenance Manager for daily activities spare parts and consumables in the department to update spares availability to cope up with the maintenance requirements. Ensure Environmental Aspect-Impact and Hazard Risk Assessment are carried out, controlled and updated. Implement, monitor and report IMS objectives, Targets and programs. Provide necessary resources for effective implementation and sustenance of IMS. Report IMS performance to the management periodically. Ensure Legal compliance with respect to their scope of activities. Responsible to ensure the compliance to legal requirements, contractual and organizational requirements. Report deviations in Integrated Management System &amp; identify root cause and implement corrective and preventive actions. Ensure aspects identified are monitored and operational controls are followed.</p><p><strong>Health, Safely, Security &amp; Environment</strong> Ensure strict adherence to all relevant HSSE and permit to work system, instructions and controls and procedures are complied with so that the safety of employees and environmental compliance can be guaranteed. Together with HSE department, ensure that safety rules and regulations are fully explained to plant employees / contractor staff and appropriate safety and protective equipment is worn; safety notices are prominently displayed in all work areas and that all accidents and incidents are efficiently investigated and analyzed whilst ensuring that measures are implemented to avoid any recurrence</p><p><strong>Budgets</strong> Responsible for the Preparation of section budget Responsible for the control and monitoring of all maintenance related costs of the section</p><p><strong>Material Management</strong> To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</p><p><strong>Troubleshooting and Technical Guidance</strong> Acquires considerable knowledge of the process and the relevant systems throughout the plant and applies the same to troubleshoot problems and leads the maintenance team in resolving the issues. To performs routine, corrective and preventive maintenance of plant equipment, cleaning of machines related to electrical section. Ensure identification of root cause for the identified non conformances/ deviations and to implement corrective actions/Preventive actions.</p><p><strong>People Management</strong> Identify the competency gap for their subordinate personnel and implement necessary actions. Carry out annual performance evaluation of reporting employees. Provide on-the-job training to new employees and evaluate their OJT Performance. Effective resource utilization. Perform other duties as assigned.</p><p>5. COMMUNICATION &amp; WORKING RELATIONSHIPS:</p><p>Internal: Needs to work closely with O&amp;M Managers, Electrical Technicians, Operations Team.</p><p>External: Work closely with contractors and vendors</p><p><strong>Desired Candidate Profile</strong></p>6. QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:<br>Bachelor of Engineering<br>10 to 12 Years related experience and training or equivalent combination of education and experience<br>Awareness of Quality, Occupational Health &amp; Safety and Environment Management system principles<br>Knowledge of applicable legal requirements<br>Hazard Risk assessment<br>Aspect Impact assessment<br>Investigating skills<br>Knowledge of spillage containment<br>Knowledge of managing HSE emergencies<br>Knowledge of identification, classification and disposal of waste<br>Knowledge of Emission Monitoring<br>Be able to lead the maintenance group.<br>Excellent communication skills in English Language<br>Computer literate. Able to use MS Outlook for correspondence.<br>Be able to use SAP as end user.

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.</p> <p>The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <p><strong>Team leadership & coordination</strong></p> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <p><strong>Documentation & reporting</strong></p> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <p><strong>Technical oversight</strong></p> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <p><strong>Handover & start-up support</strong></p> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor's degree in electrical engineering or equivalent technical qualification.</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <p><strong>Skills & competencies</strong></p> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.</p> <p>The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <p><strong>Team leadership & coordination</strong></p> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <p><strong>Documentation & reporting</strong></p> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <p><strong>Technical oversight</strong></p> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <p><strong>Handover & start-up support</strong></p> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor's degree in electrical engineering or equivalent technical qualification.</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <p><strong>Skills & competencies</strong></p> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span><strong><u>Responsibilities</u></strong></span></span></p><br><ul><li><span><span>Deliver electrical engineering services that meet Worley', its customers' and applicable statutory and regulatory specifications, on time and within budget.</span></span></li><li><span><span>Initiate, manage and if required supervise electrical engineering project requirements.</span></span></li><li><span><span>Perform electrical engineering services such as:</span></span><ul><li><span><span>participate in relevant meetings, prepare progress reports and follow required checking procedures;</span></span></li><li><span><span>ensure the project scope is clear and that changes comply with project change management processes;</span></span></li><li><span><span>provide assistance and advice during procurement, construction and commissioning activities.&nbsp; For example, write requisitions, conduct technical bid evaluations and write purchase orders.</span></span></li></ul></li><li><span><span>If required, act as the electrical engineering Lead on specific projects.</span></span></li><li><span><span>If responsible for a team:</span></span><ul><li><span><span>outline project requirements including actively promoting workshare, where appropriate, assign tasks and supervise progress;and</span></span></li><li><span><span>ensure the required services meet Worley, its customers and applicable statutory and regulatory requirements, on time and within budget.</span></span></li></ul></li><li><span><span>Proactively resolve any discrepancies between Worley and its Customer's requirements.</span></span></li><li><span><span>Keep up-to-date with the latest developments and technical innovations in electrical engineering.</span></span></li><li><span><span>If required, assist and support junior personnel within the electrical engineering team.</span></span></li><li><span><span>Communicate effectively with the electrical engineering team and project stakeholders, including the Customer.</span></span></li><li><span><span>Identify issues and problems, develop appropriate solutions, and ask for assistance when required.</span></span></li></ul> <p><span><span>Bachelor Degree in Engineering</span></span></p><br><p><span><span>Minimum experience required 15 yrs in Oil and Gas</span></span></p><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p>job description:&nbsp;</p><br><p>The role requires an individual with strong knowledge and hands-on experience in: &nbsp;• " Electrical engineering fundamentals and design principles&nbsp;• " Project scope development and execution strategies&nbsp;• " Identification and mitigation of engineering concerns&nbsp;• " Coordination of multidisciplinary project activities The engineer must be&nbsp;capable of independently handling technical responsibilities and contributing&nbsp;effectively from the outset, minimizing the learning curve. &nbsp;• Manage all electrical engineering activities within OQEP.&nbsp;• " Review and approve all EPC Consultants or consultants’ electrical design.&nbsp;• " Prepare, check and approve all electrical engineering deliverables.&nbsp;• " Assuring that work and project promises are successfully delivered and&nbsp;appropriate reviews have been conducted. &nbsp;• " Involvement in Feasibility Studies.• " Plan &amp; Propose implementation of new technology.&nbsp;• " Attending equipment tests/design reviews with vendors inside/outside the&nbsp;country. &nbsp;• " Manage staff and 3rd party activities&nbsp;• " Development of local young engineers and providing development programs.&nbsp;• " Participating in Developing Tender Specifications.&nbsp;• " Participating in Tender Clarification and Evaluation.&nbsp;• " Participating, closing action items and approving reports from Electrical&nbsp;reviews &nbsp;</p><br> *minimum 8 years of experience in Oil&amp; Gas&nbsp;<br>*Bachelor degree in Electrical or any related certificate &nbsp;<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p>job description:&nbsp;</p><br><p>The role requires an individual with strong knowledge and hands-on experience in: &nbsp;• " Electrical engineering fundamentals and design principles&nbsp;• " Project scope development and execution strategies&nbsp;• " Identification and mitigation of engineering concerns&nbsp;• " Coordination of multidisciplinary project activities The engineer must be&nbsp;capable of independently handling technical responsibilities and contributing&nbsp;effectively from the outset, minimizing the learning curve. &nbsp;• Manage all electrical engineering activities within OQEP.&nbsp;• " Review and approve all EPC Consultants or consultants’ electrical design.&nbsp;• " Prepare, check and approve all electrical engineering deliverables.&nbsp;• " Assuring that work and project promises are successfully delivered and&nbsp;appropriate reviews have been conducted. &nbsp;• " Involvement in Feasibility Studies.• " Plan &amp; Propose implementation of new technology.&nbsp;• " Attending equipment tests/design reviews with vendors inside/outside the&nbsp;country. &nbsp;• " Manage staff and 3rd party activities&nbsp;• " Development of local young engineers and providing development programs.&nbsp;• " Participating in Developing Tender Specifications.&nbsp;• " Participating in Tender Clarification and Evaluation.&nbsp;• " Participating, closing action items and approving reports from Electrical&nbsp;reviews &nbsp;</p><br> *minimum 8 years of experience in Oil&amp; Gas&nbsp;<br>*Bachelor degree in Electrical or any related certificate &nbsp;<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer – Solar PV / Electrical Power</b> in <b>Oman</b>. Our client, New Alfa International, is seeking skilled and motivated electrical engineering professionals with strong experience in solar PV, electrical construction, EPC projects, and testing &amp; commissioning. Candidates with relevant GCC project exposure are preferred. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Execute electrical construction activities for utility-scale and large rooftop solar PV projects.<br></li><li>Supervise installation and integration of LV and MV electrical networks in accordance with approved drawings and project specifications.<br></li><li>Review Single Line Diagrams (SLDs), electrical layouts, cable schedules, and related technical documentation.<br></li><li>Coordinate installation, testing, and commissioning of solar inverters and associated electrical equipment.<br></li><li>Conduct electrical inspections, functional testing, troubleshooting, and pre-commissioning checks.<br></li><li>Ensure site electrical works comply with project specifications, quality requirements, and applicable safety standards.<br></li><li>Coordinate with civil, mechanical, commissioning, and project teams to achieve construction milestones.<br></li><li>Prepare technical reports, testing records, punch lists, and commissioning documentation.<br></li></ul>Required Skills<br><ul><li><b>Solar PV Engineering:</b> Strong practical knowledge of utility-scale or large rooftop solar PV electrical systems.<br></li><li><b>LV/MV Networks:</b> Experience with installation, testing, and commissioning of low- and medium-voltage electrical systems.<br></li><li><b>Inverters:</b> Hands-on understanding of solar inverter installation, configuration, testing, and troubleshooting.<br></li><li><b>SLD Review:</b> Ability to interpret and review Single Line Diagrams and related electrical engineering drawings.<br></li><li><b>Testing &amp; Commissioning:</b> Practical experience carrying out electrical testing, pre-commissioning, and commissioning activities.<br></li></ul>Preferred Skills<br><ul><li>GCC project experience.<br></li><li>Experience working in EPC construction environments.<br></li><li>Exposure to utility-scale solar power plants.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>5–8 years of experience in electrical construction</b>, including a <b>minimum of 3 years in solar PV projects</b> involving utility-scale installations or large rooftop systems. Experience should include LV/MV networks, inverters, SLD review, testing, and commissioning. GCC experience is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.Sc. in Electrical Engineering<br></li><li><b>Preferred:</b> Not specified<br></li><li><b>Additional Certifications:</b> Not specified<br></li></ul>Contact No-9786888866<br><br><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<p>Oversee and manage all activities related to electrical systems, equipment, and processes within approved budget as well as provide technical leadership contribution and excellence in the field of electrical engineering and in compliance with the design code, HSSE level of integrity and reliability and legal requirements to ensure the safety and integrity of the electrical systems of OLNG.</p><p><strong>Managerial Responsibilities</strong></p><p>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</p><p>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</p><p>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</p><p>Conduct regular check ins with team members for alignment on expectations and performance</p><p>Lead the electrical engineering team and ensure effective and efficient utilization of resources to achieve departmental objectives</p><p>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</p><p>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</p><p><strong>Electrical Engineering Strategic Planning and Budgeting:</strong></p><p>Develop departmental strategies in alignment with the corporate strategy and ensure the delivery of business results is aligned to the corporate objectives</p><p>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</p><p>Develop optimum Capex &amp; Opex budget for all electrical activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available</p><p><strong>Electrical Engineering Project &amp; Operations:</strong></p><p>Lead electrical engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</p><p>Manage electrical project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</p><p>Develop and manage the delivery of technical excellence within all the electrical engineering activities to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Recommend best practices related to operation and maintenance of the electrical systems and equipment, oversee the maintenance, and ensure perennial availability of electrical spare parts</p><p>Conduct regular electrical spare parts reviews and follow up on action items that ensure availability of required spares to maintain complex electrical equipment</p><p>Propose and initiate new contracts for major electrical maintenance &amp; projects and carry out technical evaluation</p><p>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</p><p>Direct the team in technical studies and failure investigations, electrical SAFOP and all related elements, with base knowledge in process and instrument diagram reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</p><p>Own the electrical engineering as deputy subject matter expert (SME) and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</p><p>Control the additions to the high voltage network imposed by the complex expansion</p><p><strong>Quality and Assurance Management:</strong></p><p>Ensure technical quality of all the electrical activities within the department</p><p>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</p><p>Liaise with the area managers within maintenance and turnarounds to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Ensure that all the electrical discipline procedures are in accordance with the ISO certified quality assurance system</p><p>Oversee departmental activities and ensure HSSE and regulatory compliance to provide leadership support to achieve goal zero for the OLNG organisation</p><p><strong>Management of Electrical Engineering Contracts:</strong></p><p>Support EPE in strategizing major electrical engineering contracts from inception, contract strategy, technical evaluation, contractor evaluation to selection</p><p>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</p><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><p>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</p><p>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities in a manner that positively contributes to the core values and the policies of OLNG.</p><p>Act as the Technical Authority TA3 for asset and projects</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10 years in chemical or oil and gas industry</li><li>Omani Nationals Preferred</li><li>5 years of experience of troubleshooting, analysis of electrical networks and equipment which includes generation, distribution, and transmissions systems up to 33kV levels and HV motors and associated controls such as power management system, SCADA (System Control and Data Acquisition), Load Shedding, VSDS controllers and cryogenic equipment</li><li>Knowledge of hazardous area classification, DEP, &amp; IEC standards</li><li>Technical Authority Level3</li><li>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</li></ul>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<p>We are looking for a motivated and enthusiastic Electrical Engineer (Renewable Energy) to join our team.</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have:<br>1- A strong interest in sustainable energy technologies, particularly Solar PV, Wind Energy, and other renewable energy systems.<br>2-The ability to multitask and handle both site and office work.<br>3- Excellent technical report writing and communication skills.</p>

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Foreman</b> in <b>Oman</b>. Our client is a reputed organization in the <b>Solar PV / Construction</b> sector seeking skilled, motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise electrical installation activities at Solar PV construction sites.<br></li><li>Lead and coordinate electrical crews of approximately 10–15 workers.<br></li><li>Interpret electrical drawings, layouts, schematics, and Solar PV installation plans.<br></li><li>Monitor electrical works to ensure installations comply with approved drawings and project requirements.<br></li><li>Coordinate day-to-day site activities and allocate work effectively among electricians and technicians.<br></li><li>Inspect electrical and PV installation work and identify technical or workmanship issues.<br></li><li>Ensure safe electrical working practices are followed during site execution.<br></li><li>Support timely completion of Solar PV electrical construction activities according to project schedules.<br></li></ul>Required Skills<br><ol><li><b>Solar PV Installation:</b> Hands-on experience with electrical installation activities on Solar PV projects.<br></li><li><b>Electrical Site Supervision:</b> Ability to supervise electrical construction activities and monitor site execution.<br></li><li><b>Drawing Interpretation:</b> Ability to read and understand electrical and PV construction drawings.<br></li><li><b>Crew Management:</b> Experience managing and coordinating crews of approximately 10–15 workers.<br></li><li><b>Electrical Construction:</b> Strong practical knowledge gained through electrician/foreman experience in construction environments.<br></li></ol>Preferred Skills<br><ul><li>Solar PV construction quality inspection knowledge.<br></li><li>Site coordination and work-planning capability.<br></li><li>Familiarity with electrical safety practices applicable to Solar PV construction.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>8–10 years of experience as an electrician/foreman in construction</b>, including a <b>minimum of 3 years in Solar PV installations</b>. Candidates should have practical site supervision experience and be capable of independently managing electrical crews of 10–15 workers.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma / ITI in Electrical<br></li><li><b>Preferred:</b><br></li><li><b>Additional:</b> Valid trade certification; Solar PV installation experience mandatory<br></li></ul>Contact No-9786888866<br><br> </div>

<p>Perform electrical installation, inspection, testing, and maintenance activities at site. Carry out cable termination, temporary power arrangements, earthing, and illumination checks. Conduct continuity, insulation-resistance, and load-current tests. Identify and report electrical defects and safety risks. Support daily electrical maintenance and construction activities as directed.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Electrical Engineering or ITI certification.</li><li>Minimum 5 years of construction-site or industrial electrical experience.</li><li>Ability to use multimeters, clamp meters, and insulation-resistance testers.</li><li>Good understanding of electrical ratings, cable termination, testing, earthing, and electrical safety.</li></ul>

<p>Experience in preventive Maintenance &amp; Troubleshooting of PLC &amp; RIO, AC &amp; DC Drives and motors, Transformers, EOT Cranes, MCC, PCC, UPS, . Knowledge of field instruments/ electrical wiring SLD &amp; Panel Board.</p><p><strong>Desired Candidate Profile</strong></p><p>ITI / 12th/ 10th - Electrical / Electronics / Instrumentation 5 to 10 Years Exp must have strong ERW Tube Mill electrical maintenance experience.</p>

<p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p>Electrical Maintenance: Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations. Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards. Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment. Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages. Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor. Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area. Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests Documentation : Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing. Continuous Improvement : Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards. Policies, Processes, Systems &amp; Procedures Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner. Health, Safety, Security &amp; Environment Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed. Related Assignments Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications: A technical certificate / Associate s Diploma in Electrical maintenance. Minimum Experience: 3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment. Skills: Practical Knowledge of relevant plant equipment Awareness of HSE &amp; quality standards Team work and effective collaboration skills ISO awareness/working knowledge is preferred</p>