وظائف محلل مالي في سلطنة عمان

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<p><b>Job description</b></p><p>Qualifications, Competencies &amp; Skills</p><p>Bachelor of Nursing, with Certification in Advanced Emergency Medical Technician (AEMT)</p><p>Mandatory, and preferably with Certification in Occupational Health Nursing. This Project is</p><p>for oil &amp; Gas Industrial Site. Only Male Staff Nurse required. Age criteria 50 Years.</p><p>Nationality: Any Nationality</p><p>Training certification in the following subjects, which shall be valid at the beginning and</p><p>throughout the contract, with third-party international certification:</p><p>Basic Life Support (BLS)</p><p>Prehospital Trauma Life Support (PHTLS)</p><p>Advanced Cardiovascular Life Support (ACLS)</p><p>START Triage Certification</p><p>First Aid Instructor (AHA Heartsaver)</p><p>HACCP Level 3 Food Safety</p><p>ECG and Airway Management</p><p>ISO 45001 Auditor Certification</p><p>Limited X-ray Machine Operator (LXMO) or equivalent (only for Block 60 - Bisat)</p><p>Air Ambulance Operations Training</p><p>Medical Review Officer (MRO) Certification</p><p>Intermediate knowledge in Occupational Medical Evaluations, Health Risk Assessment and</p><p>Health Programs (Hearing Protection and Respiratory Protection, Heat Stress and Chemical</p><p>Exposure Surveillance), with certificates.</p><p>Intermediate to advanced knowledge in performing and interpretation of tests/screenings, such</p><p>as hearing, vision, lung function, electrocardiogram, vitals monitoring, drugs or alcohol, etc.</p><p>Highly proficient in performing nursing procedures with precision and confidence.</p><p>High level of accountability for professional practice, functioning as a licensed independent</p><p>practitioner.</p><p>Effective communication, leadership, teamwork, patient-centric care, and decision-making.</p><p>Experience</p><p>5 years of experience in emergency department or emergency medical service, preferably with</p><p>experience in working at Onshore, Offshore, Refinery, Petrochemical or Petroleum processes.</p>

<p>Supervise the execution of maintenance activities on the offshore platform, ensuring mechanical, electrical, and instrumentation maintenance work is carried out safely, efficiently, and in accordance with OQEP's maintenance procedures, schedules, and HSE standards. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Supervise the day-to-day execution of preventive and corrective maintenance activities on the offshore platform, ensuring work is carried out safely, efficiently, and in accordance with approved schedules and procedures.</li><li>Coordinate and oversee the work of maintenance technicians on the offshore platform, ensuring maintenance work orders are completed accurately, on time, and to the required quality standard.</li><li>Conduct routine inspections and field verification of completed maintenance work, ensuring compliance with technical standards, specifications, and HSE requirements.</li><li>Support fault-finding, troubleshooting, and resolution of mechanical, electrical, and instrumentation issues on the offshore platform, escalating complex technical issues to the Team Lead Maintenance as required.</li><li>Coordinate planned shutdowns, turnarounds, and equipment overhauls on the offshore platform, ensuring activities are properly sequenced, resourced, and completed within schedule.</li><li>Oversee the implementation of permit-to-work (PTW) processes, isolations, and risk assessments for all maintenance activities, ensuring strict adherence to safety procedures.</li><li>Monitor and manage the use of maintenance tools, equipment, and spare parts on the offshore platform, ensuring availability and proper handling in accordance with OQEP's asset management procedures.</li><li>Review and verify maintenance records, work order documentation, and equipment history logs in the CMMS prepared by maintenance technicians, ensuring accuracy and completeness.</li><li>Support emergency response and breakdown maintenance activities on the offshore platform, coordinating technician resources to minimize disruption to production operations.</li><li>Provide on-the-job guidance, coaching, and technical direction to maintenance technicians, supporting their skill development and ensuring consistent work quality.</li><li>Liaise with Operations, Engineering, and Technical Services on maintenance scheduling, equipment readiness, and coordination of work activities on the offshore platform.</li><li>Ensure full compliance with all offshore safety procedures, including helicopter and marine transport safety protocols, survival training requirements, and platform-specific HSE rules.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p>Key interactions:</p><ul><li>Internal: Operations function, Engineering function, HSSE function, Technical Services function.</li><li>External: Equipment vendors and OEMs, specialist maintenance contractors, offshore logistics and transport providers.</li></ul><p>Notable Working Conditions:</p><ul><li>Offshore platform environment with rotational shift work, exposure to marine and field operational conditions, mandatory offshore survival and safety training and certification, helicopter and/or marine transport to and from the platform.</li><li>Also provide onshore MGP Maintenance support</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Required: Bachelor's degree in Mechanical, Electrical, Instrumentation Engineering, or related discipline. Diploma holders with significant relevant experience will also be considered.</li><li>Preferred: Professional certifications in maintenance management or relevant technical discipline; offshore survival certification (BOSIET or equivalent) and vendor-specific equipment training are an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>A minimum of 5 years experience for Bachelor s degree holders, or 7 years experience for Diploma holders, in mechanical, electrical, or instrumentation maintenance within the upstream Oil &amp; Gas industry. Offshore maintenance experience is strongly preferred.</li><li>Demonstrated experience supervising or guiding technician-level maintenance work on offshore or remote field installations.</li><li>Sound technical knowledge of offshore platform equipment, systems, and maintenance practices.</li><li>Familiarity with permit-to-work (PTW) systems, isolation procedures, and offshore safety standards.</li><li>Experience using Computerized Maintenance Management Systems (CMMS) for work order management and reporting.</li><li>Valid offshore survival certification (BOSIET or equivalent) or willingness to obtain certification prior to deployment.</li></ul><p>Competencies and skills:</p><ul><li>Soft: Strong supervisory and field coordination skills. Good communication skills, verbal and written. Attention to detail and a safety-first mindset. Ability to work effectively in a team within a rotational offshore environment. Sound judgment and decisiveness in resolving field-level issues. Coaching and on-the-job guidance capability. Adaptability to offshore living and working conditions.</li><li>Technical: Mechanical, electrical, or instrumentation maintenance practices and standards. Use of hand tools, power tools, and maintenance equipment. Computerized Maintenance Management System (CMMS) usage. Permit-to-work (PTW) and isolation procedures. Fault-finding and troubleshooting techniques. Maintenance planning and work order coordination. Knowledge of offshore HSE and emergency response procedures.</li></ul>

<p>Position Title: AI-Enabled Academic and Administrative Support IT Technician Purpose: Support the development and continuous improvement of academic and institutional resources through AI, digital tools, databases and structured information systems. Closing Date: The deadline for receiving applications: 28 of September 2026. Key Responsibilities: Develop, organize and maintain structured academic resources in line with curriculum frameworks and quality standards. Apply AI-assisted tools and structured prompts to develop, refine and review academic materials within agreed guidelines. Support academic teams in consistent review, verification and quality assurance processes. Build and maintain databases and repositories covering institutional stakeholders and academic operations. Design AI-assisted workflows and agents that reduce repetitive administrative work and guide users through forms and institutional processes. Work with academic and administrative staff to identify where AI and digital tools can improve existing processes. Provide technical support for implementing and improving AI-enabled institutional solutions.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications (Essential): Bachelor s degree in Computer Science, IT, Information Systems, Data Science, Education Technology or a related discipline. Demonstrated use of generative AI tools in a professional or academic setting. Sound understanding of structured prompting for information processing and workflow support. Strong digital literacy across databases, spreadsheets and online platforms. Minimum 2 years relevant experience; strong graduate with demonstrable AI projects will be considered. Desirable: AI agents, workflow automation, or no-code/low-code platforms. Database design and data management. University, educational or healthcare environment. Quality assurance and structured documentation processes. Data protection, information security and responsible AI use.</p>

<ul><li>Conduct thorough inspections using advanced leak detection equipment to identify hidden leaks in commercial and residential properties.</li><li>Analyze data from detection tools to assess the severity and source of leaks, providing actionable solutions to clients.</li><li>Collaborate with plumbing and construction teams to ensure timely and effective repairs based on detected leaks.</li><li>Maintain accurate records of inspections, findings, and repairs for future reference and compliance purposes.</li><li>Educate clients on leak prevention strategies and the importance of regular maintenance to avoid costly repairs.</li><li>Stay updated on the latest leak detection technologies and methods to enhance service efficiency and effectiveness.</li><li>Perform routine maintenance on detection equipment to ensure optimal performance and reliability during inspections.</li><li>Respond promptly to emergency leak detection calls, minimizing potential damage and disruption for clients.</li><li>Prepare detailed reports and documentation for insurance claims and client billing, ensuring transparency and trust.</li><li>Participate in ongoing training and certification programs to continuously improve technical skills and industry knowledge.</li></ul><br/><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required; additional technical training in plumbing or HVAC preferred.</li><li>Relevant certifications in leak detection or plumbing, such as the Certified Plumbing Technician (CPT).</li><li>Familiarity with advanced leak detection technologies, including acoustic and infrared tools.</li><li>Strong analytical skills to interpret data and diagnose issues accurately.</li><li>Excellent communication skills to explain findings and recommendations clearly to clients.</li><li>Ability to work independently and manage time effectively to meet tight deadlines.</li><li>Fluency in English; additional language skills are an asset, especially in multicultural environments.</li><li>Proactive attitude with a strong commitment to customer service and satisfaction.</li></ul><br/>

<ul><li>Prepare detailed drawings and plans for civil engineering projects, ensuring accuracy and adherence to specifications.</li><li>Collaborate with engineers and architects to interpret design concepts and translate them into technical drawings.</li><li>Utilize CAD software to create 2D and 3D models, enhancing visualization and understanding of project layouts.</li><li>Conduct site surveys and measurements to gather data necessary for drafting and design purposes.</li><li>Review and revise drawings based on feedback from project stakeholders, ensuring timely updates.</li><li>Maintain organized documentation of drawings and revisions, facilitating easy access and project tracking.</li><li>Understand and apply local building codes and regulations to ensure compliance in all designs.</li><li>Assist in the preparation of project estimates, providing detailed drawings that support cost evaluations.</li><li>Participate in project meetings to discuss progress, challenges, and solutions, fostering teamwork.</li><li>Stay updated on industry trends and software advancements to continuously enhance drafting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A degree or diploma in Civil Engineering, Architecture, or a related field is essential for foundational knowledge.</li><li>Proficiency in CAD software such as AutoCAD, Revit, or similar tools is crucial for producing high-quality drawings.</li><li>A minimum of 3 years of work experience in civil drafting, preferably in construction or infrastructure projects.</li><li>Relevant certifications in drafting or civil engineering (e.g., Certified CAD Technician) enhance credibility and expertise.</li><li>Familiarity with local construction codes and regulations ensures compliance and reduces project risks.</li><li>Strong attention to detail is imperative for producing accurate and precise technical drawings.</li><li>Excellent communication skills, both verbal and written, facilitate effective collaboration with multidisciplinary teams.</li><li>Ability to manage time efficiently and meet tight deadlines in a fast-paced work environment.</li><li>A proactive attitude and problem-solving skills are essential for addressing design challenges effectively.</li></ul>

<p><b>Job description</b></p><p><b>Job Description OH &amp; EMS Doctor</b></p><p><b>Employment Terms</b></p><p><b>Position: OH &amp; EMS Doctor</b></p><p><b>Gender: Male</b></p><p><b>Nationality: Any nationality</b></p><p><b>Experience : 5+ years</b></p><p><b>Salary: OMR 1,500 per month</b></p><p><b>Duty Roster: 30 days on duty / 30 days off</b></p><p><br></p><p><b>Qualifications</b></p><p>Bachelor of Medicine (MD/MBBS) with certification in Occupational Medicine or equivalent.</p><p>Certification or membership in Emergency Medicine.</p><p>Valid professional medical license/eligibility as applicable.</p><p>Required Certifications</p><p>Basic Life Support (BLS)</p><p>Advanced Cardiovascular Life Support (ACLS)</p><p>Advanced Trauma Life Support (ATLS)</p><p>START Triage Certification</p><p>Medical Review Officer (MRO) Certification</p><p>HACCP Level 3 Food Safety</p><p>Advanced Emergency Medical Technician (EMT)</p><p>ECG and Airway Management</p><p>ISO 45001 Auditor Certification</p><p>IOSH Level 3 Certificate in Occupational Safety and Health Principles and Practice</p><p>Experience</p><p>Minimum 5 years of experience in Emergency Department or Emergency Medical Services.</p><p>Minimum 3 years of experience in Occupational Health.</p><p>Oil &amp; Gas industry experience is mandatory.</p><p>Experience in offshore, refinery, petrochemical, or petroleum processing environments is preferred.</p><p><b>Key Responsibilities</b></p><p><br></p><p>Provide primary and emergency medical care.</p><p>Assess, diagnose, and manage emergency and occupational health cases.</p><p>Conduct occupational medical assessments and fitness-to-work evaluations.</p><p>Manage work-related injuries and illnesses.</p><p>Conduct health risk assessments and workplace health surveillance.</p><p>Support hearing, respiratory, heat-stress, and chemical-exposure surveillance</p><p>programs.</p><p>Provide emergency response, stabilization, triage, and referral when required.</p><p>Maintain accurate medical records and reports.</p><p>Coordinate with HSE and management on occupational health matters.</p><p>Ensure compliance with applicable occupational health and safety standards.</p><p>Required Skills</p><p>Strong clinical and emergency medical knowledge.</p><p>Good knowledge of occupational health practices.</p><p>Knowledge of work injury classification as per OSHA.</p><p>Ability to handle medical emergencies effectively.</p><p>Strong communication, teamwork, leadership, and decision-making skills.</p><p>Ability to work independently in an industrial/site medical environment.</p><p><strong>Desired Candidate Profile</strong></p><h4>&nbsp;</h4>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Artwork Technician prepares, edits, and verifies artwork files for production, ensuring all designs comply with technical specifications, brand guidelines, and customer requirements. The role involves close collaboration with designers, production teams, and clients to deliver accurate, high-quality artwork.</p><p>KEY ACCOUNTABILITIES:</p><ul><li>Prepare, edit, and finalize artwork files for print or digital production.</li><li>Check artwork for accuracy, resolution, dimensions, color profiles, and formatting.</li><li>Ensure artwork complies with customer specifications and company quality standards.</li><li>Make technical adjustments to designs without altering the intended visual appearance.</li><li>Operate industry-standard design software such as Adobe Illustrator, Photoshop, and InDesign.</li><li>Create print-ready files and perform preflight checks before production.</li><li>Coordinate with designers, production staff, and clients to resolve artwork issues.</li><li>Maintain organized records of artwork files and revisions.</li><li>Support continuous improvement of artwork processes and documentation.</li><li>Meet production deadlines while maintaining high accuracy.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Bachelor's degree in Graphic Design, Printing Technology, Fine Arts, or a related field.</li><li>2 - 5 years of experience in artwork preparation, graphic design, or packaging artwork.</li><li>Proficiency in Adobe Creative Suite (Illustrator, Photoshop, InDesign).</li><li>Strong knowledge of prepress and print production processes.</li><li>Understanding of color management (CMYK, RGB, Pantone, ICC profiles).</li><li>Ability to prepare print-ready artwork and perform preflight checks</li><li>Knowledge of file formats such as PDF, AI, EPS, PSD, TIFF, and SVG.</li><li>Ability to interpret technical drawings, dielines, and production specifications.</li><li>Attention to Detail: Consistently identifies and corrects errors to ensure high-quality, accurate artwork.</li><li>Accountability: Takes ownership of assigned tasks and delivers work on time and to the required standard.</li><li>Communication Skills: Communicates clearly and effectively with cross-functional teams, clients, and suppliers.</li><li>Teamwork and Collaboration: Works cooperatively with marketing, production, quality, regulatory, and procurement teams.</li><li>Planning and Organization: Prioritizes tasks, manages multiple projects, and meets deadlines.</li></ul><p></p></section>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. We are hiring an accounts payable and receivable officer to own the company's payment cycle and receivables management from day one.</p> <p>What the role covers</p> <ul> <li>Processing supplier invoices: receipt, coding, verification against purchase orders and contracts, and preparation of payment runs for approval</li> <li>Maintaining supplier master data and bank details, with appropriate fraud controls</li> <li>Processing employee expense claims and reconciling corporate travel agency invoices and card statements</li> <li>Preparing and issuing customer invoices, recording receipts, and monitoring overdue balances</li> <li>Daily bank account reconciliation and petty cash and corporate card record maintenance</li> <li>Applying payment controls including segregation of duties and dual authorisation</li> <li>Identifying and escalating anomalous transactions without delay</li> </ul> <p>Requirements</p> <p>Who we are looking for</p> <ul> <li>At least five years in an accounts payable, accounts receivable, or general accounting role</li> <li>Demonstrated experience operating end-to-end AP and AR processes</li> <li>Familiarity with corporate banking platforms and payment controls</li> <li>Working knowledge of Omani VAT</li> <li>Fluent in English; working Arabic preferred</li> <li>A part-qualification or accounting technician qualification is an advantage</li> <li>Experience in a regulated financial services entity or a start-up environment is also an advantage</li> </ul> <p>What this is</p> <p>This is a founding-team role at an institution under construction. The processes, systems, and controls are being built now, and the person in this role will help shape them. If you want to own your function properly from the start, this is worth a conversation.</p></p><p></p>

<p>Hi, We have been mandated by a large conglomerate into Iron &amp; Steel Business for the mentioned role.</p><p>Designation: Technician-E&amp;A (MRSS &amp; Utility)</p><p>Qualification : ITI Electrician (Regular Course)</p><p>Experience 7+ years in Steel Plant/ Power Plant/ Heavy Manufacturing /EPC manufacturing</p><p>Hands-on experience in Electrical Maintenance, MRSS, and Utility Operations</p><p>Job Purpose : To maintain and troubleshoot electrical systems in the MRSS, Utility, and Rolling Mill areas, ensuring safe, reliable, and uninterrupted plant operations through effective preventive and breakdown maintenance while adhering to electrical safety standards.</p><p>Key Responsibilities</p><p>MRSS &amp; Electrical Maintenance</p><ul><li>Operate and maintain HT/LT electrical systems, transformers, switchgear, circuit breakers, and power distribution equipment.</li><li>Carry out preventive, predictive, and breakdown maintenance of MRSS electrical equipment.</li><li>Perform safe isolation of electrical equipment during shutdowns by following LOTO and PTW procedures.</li><li>Troubleshoot electrical faults and restore equipment to minimize production downtime.</li></ul><p>Utility Maintenance</p><ul><li>Maintain electrical systems of compressors, cooling water pumps, DG sets, MCC panels, LT/HT feeders, and utility equipment.</li><li>Monitor electrical equipment and report abnormalities to ensure reliable plant operation.</li><li>Assist during planned shutdowns and emergency breakdown maintenance.</li></ul><p>Electrical &amp; Automation</p><ul><li>Perform maintenance of AC/DC motors, MCC/PCC panels, VFDs, electrical drives, sensors, limit switches, proximity sensors, and field instruments.</li><li>Support basic PLC and automation fault identification in coordination with the Automation team.</li><li>Carry out cable laying, cable termination, panel wiring, and motor installation whenever required.</li></ul><p>Maintenance &amp; Documentation</p><ul><li>Execute preventive maintenance schedules as per maintenance plans.</li><li>Record maintenance activities, equipment history, and breakdown reports in SAP/CMMS (if applicable).</li><li>Maintain housekeeping and ensure availability of critical electrical spares.</li></ul><p>Safety &amp; Compliance</p><ul><li>Follow electrical safety procedures, PTW (Permit to Work), and LOTO guidelines.</li><li>Ensure compliance with company safety standards during maintenance activities.</li><li>Participate in safety audits and toolbox talks.</li></ul><p>Key Skills:</p><ul><li>Hands-on experience in HT/LT electrical maintenance</li><li>Experience with transformers, switchgear, MCC panels, motors, and utility equipment</li><li>Breakdown &amp; Preventive Maintenance</li><li>MRSS / Substation Maintenance</li><li>11kV / 33kV System Experience</li><li>Basic PLC Knowledge</li><li>ABB / Siemens Drives</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Qualification : ITI Electrician (Regular Course)</li><li>Experience 7+ years in Steel Plant/ Power Plant/ Heavy Manufacturing /EPC manufacturing</li><li>Hands-on experience in Electrical Maintenance, MRSS, and Utility Operations</li><li>Key Skills: Hands-on experience in HT/LT electrical maintenance, Experience with transformers, switchgear, MCC panels, motors, and utility equipment, Breakdown &amp; Preventive Maintenance, MRSS / Substation Maintenance, 11kV / 33kV System Experience, Basic PLC Knowledge, ABB / Siemens Drives</li></ul>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The Avionics Technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong><br> Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.<br> Operates avionics systems by using aircraft controls to determine operational condition.<br> Interprets equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.<br> Uses technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.<br> Removes and installs components. Performs and supervises alignment calibration and bore sight of avionics systems. Uploads operational software into system components.<br> Inspects, analyzes and evaluates avionics systems. Interprets inspection findings and determines adequacy of corrective actions.<br> Reviews maintenance management publications and procedures. Recommends methods to improve equipment performance and maintenance procedures.<br> Performs on-the-job training and instruction, supervises and accepts work performed by RAFO technicians.</p> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Do you picture yourself as an Engineering Supervisor? At Crowne Plaza Resort Salalah, our goal is to make business travel work — and that’s where YOU come in.</span></p><br><p><span>When you join Crowne Plaza Resort Salalah, you are more than just your job title. We look for energetic, confident, and ambitious individuals who excel in their roles and help our guests succeed.</span></p><br><p><span>Set on 45 acres of beautiful tropical gardens and a long stretch of pristine sandy beach, Crowne Plaza Resort Salalah is perfectly positioned for business, meetings, and leisure travel.</span></p><br><p><span>Our guests’ safety, comfort, and experience always come first.</span></p><br><p><span>We are looking for a skilled and motivated Engineering Supervisor to join our hotel Engineering team. The successful candidate will support the safe, efficient, and reliable operation of the hotel’s engineering systems while maintaining high standards of preventive maintenance, guest service, safety, and operational efficiency.</span></p><br><p><span>A little taste of your day-to-day</span></p><br><ul><li><p><span>Supervise and coordinate the daily activities of the Engineering team and ensure maintenance requests are completed efficiently and to the required standard.</span></p><br></li><li><p><span>Monitor, operate, troubleshoot, and maintain centralized chilled-water systems, chillers, HVAC equipment, pumps, air-handling units (AHUs), fan-coil units (FCUs), and associated mechanical systems.</span></p><br></li><li><p><span>Carry out and supervise planned preventive maintenance and reactive maintenance across the hotel.</span></p><br></li><li><p><span>Conduct regular inspections of plant rooms, equipment, guest rooms, public areas, back-of-house areas, and other hotel facilities.</span></p><br></li><li><p><span>Respond promptly to engineering-related guest and operational requests, minimizing equipment downtime and disruption to hotel operations.</span></p><br></li><li><p><span>Assist in identifying recurring equipment faults and recommend appropriate corrective and preventive actions.</span></p><br></li><li><p><span>Ensure engineering activities comply with hotel standards, health and safety requirements, fire and life-safety procedures, and applicable local regulations.</span></p><br></li><li><p><span>Maintain accurate maintenance records, equipment logs, checklists, and work-order documentation.</span></p><br></li><li><p><span>Monitor the proper use of tools, spare parts, materials, and engineering supplies.</span></p><br></li><li><p><span>Support energy conservation and sustainability initiatives by monitoring equipment performance and identifying opportunities to improve efficiency.</span></p><br></li><li><p><span>Coordinate with other hotel departments to ensure engineering requirements are addressed promptly and professionally.</span></p><br></li><li><p><span>Support the training and development of Engineering colleagues and promote a culture of teamwork, accountability, safety, and continuous improvement.</span></p><br></li><li><p><span>Assist the Chief Engineer/Assistant Chief Engineer with departmental activities and assume supervisory responsibilities as required.</span></p><br></li></ul><p><span>What do we need from you?</span></p><br><ul><li><p><span>Technical qualification, Diploma, or equivalent vocational certification in Air-Conditioning &amp; Refrigeration (AC&amp;R), Mechanical Engineering, or a related engineering field.</span></p><br></li><li><p><span>Relevant technical or trade certification in HVAC/AC&amp;R is highly desirable.</span></p><br></li><li><p><span>Minimum 2 years of relevant engineering/maintenance experience in the Middle East, preferably in a supervisory or senior technician capacity.</span></p><br></li><li><p><span>Previous hotel engineering experience would be an advantage, particularly within an international hotel environment.</span></p><br></li><li><p><span>Strong practical knowledge and hands-on experience with centralized chilled-water systems and chillers.</span></p><br></li><li><p><span>Good overall technical knowledge of HVAC systems, preventive maintenance, reactive maintenance, mechanical equipment, and general hotel engineering operations.</span></p><br></li><li><p><span>Basic knowledge of electrical, plumbing, fire and life-safety, and building management systems would be an advantage.</span></p><br></li><li><p><span>Ability to diagnose technical problems and carry out or coordinate effective corrective action.</span></p><br></li><li><p><span>Good communication, organizational, and team-supervision skills.</span></p><br></li><li><p><span>Ability to work effectively under pressure and respond appropriately to emergency maintenance situations.</span></p><br></li><li><p><span>Basic computer literacy and familiarity with maintenance/work-order systems are desirable.</span></p><br></li><li><p><span>Good command of English; additional languages would be an advantage.</span></p><br></li></ul><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>