وظائف لخريجي كلية الهندسة في سلطنة عمان

<p>We have openings for our prestigious client in Oman; they have openings for "MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!!</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC.</p><p>2) GCC EXP IS PREFERRED</p><p>Below are the open positions:</p><ul><li>1) MEP Engineer.</li><ul><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>2) Plumbing Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>3) HVAC Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>4) Electrical Supervisor.</li><ul><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul></ul>

<p>Conduct routine plant rounds and inspect assigned process areas. Support system walk-downs, punch-list clearance and mechanical completion activities. Participate in flushing, blowing, loop checking, leak testing and functional testing during commissioning. Perform equipment and process line-ups according to approved operating procedures. Operate field equipment associated with the reduction shaft/reactor, process gas circuit, Process Gas Heater and material-handling systems. Start and stop pumps, fans and other auxiliaries as instructed by the control room. Monitor equipment for leaks, unusual vibration, noise, temperature or other abnormalities. Read local gauges and instruments and communicate field readings to the Panel Operator. Assist during plant start-up, stabilization and shutdown activities. Support equipment isolation and reinstatement in coordination with operations and maintenance. Maintain field logbooks and operating checklists. Follow strict safety precautions when working around natural gas, hydrogen-rich reducing gas and carbon monoxide. Immediately report unsafe conditions, gas leaks, equipment abnormalities and process deviations. Maintain good housekeeping and operational discipline throughout assigned areas.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 1 year of relevant experience for degree holders or 4 years for diploma holders.</li><li>At least 1 year as a Shift Field Operator in an industrial process plant.</li><li>Experience in HYL/Energiron DRI, Midrex DRI, fertilizer, petrochemical or similar gas-based process plants is preferred.</li><li>Basic understanding of DRI processes, PGH, natural-gas handling and water-treatment systems.</li><li>Ability to understand P&amp;IDs, equipment identification and operating procedures.</li><li>Knowledge of industrial safety, PTW and LOTO practices.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conceptualise detailed project reports and project execution plans after thorough discussion with clients, selection of sites, project evaluation in terms of outlays and profits attached. Establish time span of project execution as per client specifics.</li><li>Generate progress reports, monitor project status, cost and time reconciliation.</li><li>Evaluate Designs; coordinate with Consultants and Sub Contractors for changes in the same.</li><li>Supervise all construction activities, providing technical inputs for methodologies of construction &amp; coordination with site management activities including HSE management.</li><li>Interact with Site Purchasers and Suppliers for achieving cost effective purchase of equipment, accessories, material with timely delivery so as to minimise project cost</li><li>Coordinate with Clients, Main /Sub Contractors, monitor their performance in view of project schedule. Settle all techno commercial disputes / clarifications during execution of project Implement QA / QC procedures, Prepare Method Statements including inspection and test plans Conduct Quality / Safety Audits to ensure adherence to Quality and Safety norms across the entire course of project execution.</li><li>Prepare schedules for all projects including Resource Schedules, Execution methodologies, Milestones, Cash Flow projections and Budgets.</li><li>Prepare and monitor resource requirements based on the budgetary parameters, make changes in the same as per revised schedules and budgets.</li><li>Ensure the smooth functioning of the project in terms of quality, time, cost; including Quantity Surveying and Billing of the project.</li><li>Track and control cost accruals based with respect to budgets.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Graduate Civil Engineers with 6-10+ years of experience</strong> in large engineering projects like high rise commercial complexes / IT Parks / hospitals / residential buildings , mass housing projects / factories / integrated townships.</p></li><li><p><strong>Preference will be given to candidates who are currently available in Oman and can join within 45 days.</strong></p></li></ul><p></p></section>

<p>We have openings for our prestigious client in Oman; they have openings for Fleet Supervisor &amp; QA QC Lead (Mechanical) Experience in Oil &amp; Gas Oman Location PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of Birth:- Age:- Below is the open positions: - A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor. B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills. Please inform your friends &amp; colleagues for the same. Warm Regards, Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services Branches: - Surat (HO) | Navi Mumbai | Oman | UAE Mobile: - PHONE_NUMBER Email id: - EMAIL_ADDRESS Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST.</p><p>A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor.</p><p>B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills.</p>

<p>Greetings Form TQcert (Tata Projects) ! We Have Requirement With Our Reputed Client.</p><p>Job Position: Welding Inspectors - CBT</p><p>Job Location: Oman (Onshore Fabrication Yard)</p><p>Benefits: Salary + F.A.T Duty Hours: 10 Hrs - 6 Days.</p><p><b><br></b></p><p><b>Key Responsibilities:</b></p><ul><li>NDT Coordination Witness and validate NDT activities such as RT, UT, MT, and PT. Review NDT reports and ensure acceptance criteria compliance.</li><li>Documentation &amp; Reporting Review and endorse QA/QC documentation including: Welding procedures (WPS/PQR) Inspection reports Material traceability records Prepare daily/weekly inspection reports and submit to client/TPI agency. Identify and report non-conformances (NCRs) and follow up on corrective actions.</li><li>Compliance &amp; Standards Ensure adherence to: AWS D1.1, ASME Section IX, ISO standards, Client specifications and project requirements Verify material identification and traceability.</li><li>Stakeholder Coordination Interface with contractor QA/QC, client representatives, and project team. Provide technical clarification and inspection feedback.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / Degree in Mechanical Engineering or related discipline.</li><li>CSWIP 3.1 / AWS-CWI or equivalent (Mandatory).</li><li>CBT Certification (as per client/project requirements) .</li><li>Knowledge of international codes and offshore fabrication standards.</li><li>5-10 years in welding inspection.</li><li>Mandatory experience in Third Party Inspection (TPI) assignments.</li><li>Having Experience in offshore structures (jackets, topsides, modules) fabricated in onshore yards is added advantage.</li><li>Willing to work in onshore yard environments.</li><li>Ability to work under strict timelines and quality requirements.</li><li>Immediate availability preferred.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>An Oracle EAM (Enterprise Asset Management) Consultant is responsible for implementing, configuring, and supporting Oracle’s EAM modules to optimize asset lifecycle management, preventive maintenance, and work order processes. They act as subject matter experts bridging business requirements with Oracle Cloud or E-Business Suite solutions.</strong></p><p><strong>� Key Responsibilities</strong></p><ul><li><p><strong>Implementation &amp; Configuration</strong></p><ul><li><p>Lead full-cycle Oracle EAM implementations (Cloud or EBS).</p></li><li><p>Configure modules such as Asset Management, Work Orders, Maintenance Programs, Work Definitions, Resources, and Work Centers.</p></li><li><p>Set up asset hierarchies, preventive/predictive maintenance schedules, and failure codes.</p></li></ul></li><li><p><strong>Business Analysis &amp; Design</strong></p><ul><li><p>Translate complex maintenance and reliability requirements into Oracle EAM configurations.</p></li><li><p>Prepare functional design documents, process flows, and training materials.</p></li><li><p>Conduct Conference Room Pilots (CRPs), User Acceptance Testing (UAT), and end-user training.</p></li></ul></li><li><p><strong>Integration &amp; Data Management</strong></p><ul><li><p>Design integrations with legacy systems (Oracle EBS EAM, CMMS, IoT, SCADA).</p></li><li><p>Validate and migrate asset master data, maintenance programs, and historical work orders.</p></li><li><p>Work with Oracle Integration Cloud (OIC) for seamless connectivity.</p></li></ul></li><li><p><strong>Support &amp; Optimization</strong></p><ul><li><p>Provide ongoing production support and resolve service requests.</p></li><li><p>Monitor KPIs, operational metrics, and asset performance.</p></li><li><p>Recommend improvements to maintenance strategies and system configurations.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>� Qualifications</strong></p><ul><li><p><strong>Education</strong>: Bachelor’s degree in Computer Science, Engineering, or related field.</p></li><li><p><strong>Experience</strong>: 5–10 years in Oracle EAM implementations; at least 2 full-cycle projects.</p></li><li><p><strong>Technical Skills</strong>:</p><ul><li><p>Oracle Cloud Maintenance / EBS EAM modules.</p></li><li><p>SQL, PL/SQL, APIs, REST/SOAP web services.</p></li><li><p>Data conversion, validation, and reporting tools (TOAD, SQL Navigator).</p></li></ul></li></ul><p><strong>Soft Skills</strong>: Strong analytical ability, problem-solving, and communication skills.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Model Leader CFM56 -2/-3 et -7B applications au soutien militaire F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein de Safran Aircraft Engines, la Direction de l'Engineering du <br>Support et des Services a pour mission d'assurer la satisfaction des <br>clients et la profitabilité des activités par l'expertise technique. <br>Elle compte ainsi une pluralité de métiers qui gèrent la relation client, <br>le suivi du comportement des produits en service et l'élaboration <br>d'actions correctives permettant d'optimiser le coût d'exploitation de <br>plus de 20.000 moteurs. <br>Elle assure le support des opérations clients en s'appuyant sur des <br>représentants chez les compagnies aériennes et dans les ateliers de <br>maintenance. <br>Son ambition est d'être reconnue par les clients pour son expertise <br>technique et son support adaptés à leurs besoins opérationnels. <br>Safran Aircraft Engines conçoit, produit et commercialise à travers <br>CFM International les moteurs civils CFM56 (A320, B737, <br>applications spécifiques militaires), LEAP (A320neo, B737MAX) et <br>GE90/GP7200 (B777, A380). <br>Au sein de la direction Engineering Support &amp; Services, vous <br>rejoignez le département Customer Product Support Engineering sur <br>le produit CFM56. <br>Le poste proposé est celui de Model Leader sur les applications <br>Boeing CFM56-7B militaires, -2, -3. <br>Le poste permet et nécessite d'avoir une vision globale sur tout ce <br>qui se passe sur les produits CFM56-7B, -2, -3 et d'être en contact <br>avec l'ensemble de nos clients et l'avionneur.<br>Les principales missions sont, sur les aspects techniques : <br>* Réaliser le suivi du comportement des moteurs en service avec les <br>équipes Line maintenance sur toutes les applications CFM56 et <br>coordonner avec elles les activités lors d'évènements en service, <br>* Porter la voix du client en interne : identification et animation de la <br>remontée des signaux faibles, <br>* Participer à la définition des plans d'actions en service, <br>* Organiser et animer la communication vers nos clients au nom de <br>CFM avec votre équivalent chez GE Aviation et avec la Marque <br>technique (points hebdomadaires et 1 meeting annuel en Face to <br>Face avec les clients militaires)<br>* Assurer la communication à nos clients au nom de CFM (plusieurs <br>visioconférences dans l'année, 1 Symposium annuel</p><br><br><p>Déplacements à l'étranger ~3 fois par an suivant l'actualité <br>Possibilité d'être appelé le week-end en cas d'évènement en service. <br>Nombreux imprévus pouvant changer rapidement votre agenda </p><br><br><p>Poste de management transversal <br>Vous vous appuyez sur les ressources du CPSE CFM56 <br>(37personnes) qui comprend des spécialistes support des différents <br>modules de responsabilité SAE <br>Poste permettant d'être en interface avec différents profils/secteurs : <br>- en interne : vous travaillez avec les chefs de marque technique, <br>chefs de marque support &amp; service, membres de l'Equipe de <br>Programme <br>- en externe : vous êtes le point focal connu de nos clients, de l'avionneur, de notre partenaire</p><br><br><br> </div>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><br></p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities::</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs.</li><li>In doing so, the roles may include but are not limited to: <ul><li>Selection of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction). Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul></li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</li><li>External: Contractors &amp; Service Providers</li></ul><p><strong>Notable Working Conditions.</strong></p><p>Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><p>Degree in Petroleum engineering or related.</p><p><strong>Language requirements :</strong></p><p>Excellent knowledge of written, read, and spoken English (required)</p><p>Arabic - Native (desirable)</p><p><strong>Background and experience</strong></p><p>+10 years of relevant experience</p><p>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</p><p><strong>Competencies and skills:</strong></p><p><strong>Soft:</strong> Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved. Excellent interpersonal skills and multi-cultural sensitivity.</p><p><strong>Technical:</strong> Computer literate with expertise in MS Office. Hands on experience at managerial level in Oil &amp; Gas subsurface field Experienced in resource control, contract management and general management.</p>

<p>Position Information Summary The After Sales Manager is responsible for leading and managing all after-sales operations for trucks and buses, ensuring high levels of customer satisfaction, service quality, and profitability. The role oversees workshop operations, spare parts availability, warranty administration, service contracts, and customer support while ensuring compliance with manufacturer standards and company policies.</p><p>Reporting To: Chief Executive Officer</p><p>Key Responsibilities</p><ul><li>Manage the overall after-sales business, including workshop, spare parts, warranty, and field service operations.</li><li>Develop and implement strategies to improve customer satisfaction, retention, and service revenue.</li><li>Ensure efficient workshop operations, including job planning, productivity, quality control, and timely vehicle delivery.</li><li>Monitor and improve key performance indicators (KPIs) such as workshop efficiency, technician productivity, first-time fix rate, and customer satisfaction.</li><li>Oversee spare parts inventory management to ensure optimum stock levels and parts availability.</li><li>Manage warranty claims, ensuring accurate documentation and timely submission in line with manufacturer requirements.</li><li>Build and maintain strong relationships with fleet customers and key accounts through regular visits and proactive support.</li><li>Lead, coach, and develop service advisors, workshop supervisors, technicians, and parts personnel.</li><li>Ensure compliance with health, safety, environmental, and quality standards.</li><li>Prepare annual budgets, monitor expenses, and achieve departmental profitability targets.</li><li>Analyze service performance reports and implement continuous improvement initiatives.</li><li>Coordinate with sales, technical support, and manufacturers on product issues, recalls, and service campaigns.</li><li>Ensure all service processes comply with manufacturer guidelines and company policies.</li><li>Handle customer complaints professionally and ensure timely resolution.</li><li>Identify opportunities to increase after-sales revenue through maintenance contracts, value-added services, and customer loyalty programs.</li></ul><p>Qualifications</p><ul><li>Bachelor s degree in mechanical engineering, Automotive Engineering with Business Administration, or a related field.</li><li>Professional certifications in automotive or commercial vehicle service management are an advantage.</li></ul><p>Experience</p><ul><li>Minimum 10 years of experience in commercial vehicle after-sales operations, including preparing budgets and P&amp;L management</li><li>Minimum 5 years in a managerial role within a truck and bus dealership or commercial vehicle manufacturer.</li><li>Experience in establishing and managing workshop operations, spare parts, warranty, and customer service.</li><li>Experience in Dealer and Service Partner Management</li></ul><p>Required Skills</p><ul><li>Strong leadership and team management skills.</li><li>Excellent knowledge of truck and bus maintenance, diagnostics, and repair processes.</li><li>Understanding of dealer management systems (DMS), ERP systems, and workshop management software.</li><li>Strong financial and budget management skills.</li><li>Excellent customer relationship and conflict resolution abilities.</li><li>Analytical and problem-solving skills.</li><li>Effective communication and negotiation skills.</li><li>Ability to work under pressure and achieve performance targets.</li><li>Proficiency in Microsoft Office applications.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Customer Satisfaction Index (CSI)</li><li>Workshop productivity and efficiency</li><li>Technician utilization rate</li><li>First-time fix rate</li><li>Service revenue growth</li><li>Spare parts sales growth</li><li>Warranty claim accuracy and recovery</li><li>Vehicle turnaround time</li><li>Customer retention rate</li><li>Department profitability</li><li>Health and safety compliance</li></ul><p>Technical Competencies</p><ul><li>Commercial Vehicle Diagnostics</li><li>Workshop Operations</li><li>Fleet Maintenance</li><li>Warehouse &amp; Inventory Management</li><li>ERP Systems (SAP/Odoo)</li><li>Warranty Systems</li><li>Technical Reporting</li><li>Root Cause Analysis</li><li>Preventive Maintenance Planning</li><li>KPI Dashboard Development</li><li>Budgeting &amp; Financial Analysis</li><li>Contract &amp; SLA Management</li><li>Government Tender Support</li></ul><p>Language Requirements</p><ul><li>Fluent English (Mandatory) verbal and written.</li><li>Arabic (Mandatory) conversational and business communication with customers, government entities, and service partners.</li></ul><p>Other Requirements</p><ul><li>Middle East /Oman Driving License.</li><li>Willingness to travel extensively across the Sultanate of Oman and Middle east.</li><li>Ability to support customers personally during emergency breakdowns and critical fleet operations.</li><li>Strong understanding of Government procurement processes and public-sector customer expectations.</li></ul><p>Reporting Line</p><ul><li>Reports to: CEO / Dealer Principal / Aftersales Director</li><li>Direct Reports: Workshop Manager/Supervisor Service Advisors Parts Manager Warranty Administrator Field Service Team Technicians (directly or through supervisors)</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering with Business Administration, or a related field. Professional certifications in automotive or commercial vehicle service management are an advantage. Minimum 10 years of experience in commercial vehicle after-sales operations, including preparing budgets and P&amp;L management. Minimum 5 years in a managerial role within a truck and bus dealership or commercial vehicle manufacturer. Experience in establishing and managing workshop operations, spare parts, warranty, and customer service. Experience in Dealer and Service Partner Management. Strong leadership and team management skills. Excellent knowledge of truck and bus maintenance, diagnostics, and repair processes. Understanding of dealer management systems (DMS), ERP systems, and workshop management software. Strong financial and budget management skills. Excellent customer relationship and conflict resolution abilities. Analytical and problem-solving skills. Effective communication and negotiation skills. Ability to work under pressure and achieve performance targets. Proficiency in Microsoft Office applications. Middle East /Oman Driving License. Willingness to travel extensively across the Sultanate of Oman and Middle east. Ability to support customers personally during emergency breakdowns and critical fleet operations. Strong understanding of Government procurement processes and public-sector customer expectations.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210945&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Baroid&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ALTERNANCE Ingénieur-e , Chargé-e de projet F/H</p><br><br><p>Alternance</p><br><br><p>1 à 2 ans</p><br><br><p>Etudiant</p><br><br><p>Temps complet</p><br><br><p>Rattaché-e au Customer Training Center du département Engineering Support &amp; Services, vous rejoindrez l'équipe gestion de projet dans la démarche de plan de progrès et l'assisterez sur les missions suivantes :<br>- Participer au pilotage de projets tels que la planification de la Charge/Capacité ou l'analyse des besoins client <br>- Concevoir et déployer des outils de pilotage <br>- Recueillir et analyser les besoins terrain en animant des ateliers<br>- Tester, itérer et déployer les solutions <br>- Communiquer sur les avancées du projet<br>- Accompagner le changement<br>Pour mener votre mission, vous travaillerez avec une équipe pluridisciplinaire, et devrez interagir avec d'autres sites comportant des ateliers de training et de production</p><br><br><p>Nos points forts : <br>• Une forte dynamique afin de développer la créativité et l'innovation auprès de tous les collaborateurs <br>• Une offre de formation : Université interne Safran <br>Les plus de cette opportunité : Accord télétravail, salle de sport, conciergerie, restauration collective, avantages CSE et couverture frais de santé. Le site est accessible en transport en commun et/ou navettes. <br>Rejoindre une société connectée, innovante et engagée vous motive ? Rejoignez le vol Safran Aircraft Engines et propulsez votre avenir ! <br>C'est par ici pour postuler…Et rencontrons-nous !! </p><br><br><p>De formation Bac +5 Ecole d'ingénieur/université ou équivalent à la recherche d'un apprentissage de 1 an.<br>Vous êtes attiré-e par le secteur de la production aéronautique, et vous avez une appétence pour le pilotage de projet et l'IA<br>Vous êtes également doté-e d'une capacité d'écoute et d'analyse, vous savez faire preuve de curiosité et de créativité avec une grande capacité d'autonomie et d'organisation. <br>Une maîtrise du pack office et des outils informatiques notamment Excel / MS Project / Gantt<br>Project est essentiel.<br>Une connaissance des systèmes de données (PowerBI, Html, Sharepoint, VBA ou access, …) serait un réel atout<br>Anglais professionnel nécessaire.</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p><b>Job Description</b></p> <p>Service Delivery Manager - Oilfield Chemicals</p> <p> </p> <p>Do you like working in collaborative teams and solving critical issues?</p> <p> </p> <p>Do you enjoy being part of a successful team?</p> <p> </p> <p> </p> <p> </p> <p>Join our team</p> <p> </p> <p>Our Oilfield &amp; Industrial Chemicals (OIC) business provides technologies to monitor and control our customers energy extraction assets. Our team provides technical expertise to meet client expectations. We provide customers with the peace of mind needed to reliably and efficiently improve their operations.</p> <p> </p> <p>Partner with the best</p> <p> </p> <p> </p> <p> </p> <p>As a Service Delivery Manager Oilfield Chemicals, you will be responsible for:</p> <p> </p> <p>Ensure all activities are carried out according to our non-negotiables and our cultural pillars</p> <p>Constructing business plans incorporating essential market drivers and all obtainable analytics.</p> <p>Oversee the budget and P/L for the area of responsibility</p> <p>Collaborate with sales/comms teams as well as direct interaction with customers for assigned area to understand the activity forecast (volume and complexity)</p> <p>Ensure flawless execution and on-time delivery by assigning appropriate resources in line with volume and complexity of forecasted activity and ensuring Quality plans are in line with our job cycle process</p> <p>Ensure that the team fully understand the contracts/quote for their assigned job portfolio to ensure we harvest our contracts and collect what we are owed</p> <p>Leadership to Develop team in line with competency and training programs for their respective positions as well as future career plans</p> <p>Leading and driving continuous cost-efficiency alternatives while maintaining excellence in service delivery, Preparation and handling required resources for growth including equipment.</p> <p>Fuel your passion</p> <p> </p> <p><b>To be successful in this role you will:</b></p> <p> </p> <p>Have a Bachelor's degree of Engineering.</p> <p>Have at least 10 years of experience of a technical background in Oilfield Chemicals.</p> <p>Have at least 5 years of experience in a leadership role and multi-country management</p> <p>Have excellent interpersonal and leadership skills.</p> <p>Have an excellent operational background.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur(e) Algorithmes de Navigation Spatiale F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoignez une équipe dynamique au Centre d'Ingénierie Produits de Navigation (CIPN) de Safran Electronics &amp; Defense !<br>Vous ferez partie d'une équipe passionnée qui développe des systèmes de navigation avancés pour le spatial. Votre rôle consistera à identifier les besoins des équipements, proposer des solutions innovantes et travailler en collaboration avec des experts dans divers domaines techniques tels que le traitement du signal, l'architecture système, le logiciel embarqué, l'électronique et la sûreté de fonctionnement.<br>Ce que vous ferez:<br>• Étude et conception d'algorithmes de navigation : analyser les besoins des équipements de navigation spatiale et concevoir des algorithmes avancés.<br>• Prototypage sur simulateur : développer et tester des prototypes d'algorithmes sur des simulateurs pour évaluer leurs performances.<br>• Rédaction de documents de spécification : rédiger des documents de spécification détaillés avec précision et traçabilité pour assurer une compréhension claire et cohérente des besoins.<br>• Évaluation de la maturité technologique : évaluer la performance et la maturité des technologies et des algorithmes utilisés.<br>• Modélisation de l'architecture des systèmes : utiliser des outils MBSE (Model-Based Systems Engineering) pour modéliser les architectures des systèmes.</p><br><br><p>• Innovation et technologie : Travaillez sur des projets de pointe utilisant les technologies les plus récentes en navigation aéronautique et spatiale.<br>• Équipe dynamique et collaborative : Intégrez une équipe de passionnés qui partagent leurs expertises et collaborent de manière étroite.<br>• Développement professionnel : Bénéficiez d'opportunités de développement personnel et professionnel au sein d'une entreprise leader dans le domaine de l'aéronautique et de la défense.<br>Si vous êtes prêt(e) à relever ce défi passionnant, envoyez-nous votre candidature dès maintenant !</p><br><br><p>Vous êtes un(e) jeune ingénieur(e) de formation généraliste ou aéronautique/spatial avec une première expérience ou un stage en recherche et développement. Vous possédez un fort intérêt pour les technologies aéronautiques et spatiales et souhaitez contribuer à des projets innovants.<br>Compétences et expériences idéales (tous les critères ne sont pas requis) :<br>• Bases solides en automatique et </p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Drilling Product Engineer is responsible for assisting the PSD team to deliver safe, efficient, and reliable product and service delivery for our customers. The WEC Drilling Product Engineer develops and delivers optimized technical job designs for the area of responsibility. This person identifies opportunities for continuous improvement of service delivery and formally communicate findings, and supports the Business Line(s) in risk management and apply lessons learned to improve job design. The WEC Drilling Product Engineer provides real-time support to PSD operations as required, and is responsible for the COSD (i.e. resource consumption).</p><br><ul><li>Develop technical job designs as required for the Business Line(s).</li><li>Identify areas where new and cost-effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Provide technical support throughout the service delivery process.</li><li>Understand and communicate value of technology and interpretations.</li><li>Consult with relevant subject matter experts as required to optimize the technical design.</li><li>Support the OU PSD and/or PSD Manager in the execution phase with design changes as required due to changes in job dimensions, resource availability, service quality incidents, etc.</li><li>Assist in incident response, recovery, and incident investigation.</li><li>Support multiple Business Line(s) operations in a collaborative optimized job design.</li><li>Assist sales and commercial team in evaluating technical viability and tenders.</li><li>Analyze job execution vs. design and formally capture design improvements and optimization opportunities (lessons learned and best practices).</li></ul><p><strong>Minimum Qualifications:</strong></p><br><ul><li>Bachelor's degree in Engineering or Geoscience.</li><li>Strong technical competency in Drilling Downhole Products such (Bits, Jars, Reamers, Stabilizers...etc)</li><li>Strong technical competency in BHA design.</li><li>Minimum of 5 years of experience in similar roles.</li></ul><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The HSE Engineer is responsible for implementing and monitoring health, safety, and environmental policies and procedures, ensuring compliance with regulations and project requirements, conducting inspections and risk assessments, and promoting a safe working environment across the project.</p><br><br><p>Hill International, with more than 4,300+ professionals in over 100 offices worldwide, provides program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. Engineering News-Record magazine recently ranked Hill as one of the largest program management firms in the world. For more information on Hill, please visit our website at&nbsp;www.hillintl.com.</p><br><p>Hill is exclusively a program, project, and construction management provider, meaning we have one focus as a company: protecting client interests. Free of any potential conflicts, our entire business is geared towards helping clients achieve their desired outcomes. We are dedicated to exceeding expectations throughout the entire construction project lifecycle and adapt to the needs of each assignment to develop tailored approaches and solutions to meet those needs.</p><br><p>Hill is a GISI Consulting Group company, part of the Global Infrastructure Solutions, Inc. (GISI) family of companies. Learn more about GISI Consulting Group at&nbsp;www.gisiconsulting.com.</p><br><p><b>Hill International is an Equal Opportunity Employer/Veteran/Disabled</b><br><u>Note</u>:&nbsp;<i>This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities and other essential functions to be carried out as part of fulfilling the role mentioned in the job title. Various other duties as required.</i></p><br><br>Responsibilities:<br><ul><li><p><span><span>Implement and monitor the HSE plan in accordance with local and international standards.</span></span></p><br></li><li><p><span><span>Conduct daily site safety inspections and record findings.</span></span></p><br></li><li><p><span><span>Enforce compliance with safety protocols for steel erection, scaffolding, and confined spaces.</span></span></p><br></li><li><p><span><span>Lead incident investigations and report root causes with corrective actions.</span></span></p><br></li><li><p><span><span>Maintain safety documentation and logs for inspections, drills, and trainings.</span></span></p><br></li><li><p><span><span>Deliver toolbox talks, inductions, and safety awareness sessions.</span></span></p><br></li><li><p><span><span>Review and approve contractors’ HSE documentation and method statements.</span></span></p><br></li><li><p><span><span>Participate in HSE audits and liaise with authorities when required.</span></span></p><br></li><li><p><span><span>Monitor environmental compliance and emergency response readiness.</span></span></p><br></li><li><p><span><span>Proactively promote a culture of safety and accountability on-site.&nbsp;</span></span></p><br></li><li><p><span><span>Perform other duties as assigned by the line manager/supervisor.</span></span></p><br></li></ul><br>Qualifications:<br><ul><li><span><span>Degree or Diploma in Engineering or HSE-related field.</span></span></li><li><span><span>10+ years of HSE experience in infrastructure and steel structure projects.</span></span></li><li><span><span>NEBOSH IGC or equivalent mandatory.</span></span></li></ul> </div>

<p>Job Description: Hands-on development on a live production SaaS platform. The role covers end-to-end feature delivery, API design, database schema, business logic, and the frontend built on top of it. The focus is backend, with full ownership of features from specification through to production. Responsibilities: Design, build and maintain REST APIs and backend services in production Design and evolve database schema — tables, constraints, indexes, migrations Develop frontend interfaces for delivered features (React / Next.js) Integrate third-party APIs and external services Write and review database migrations before they reach production Debug and resolve production issues Deploy, monitor and maintain delivered work Short release cycles, direct ownership of shipped features, and involvement across the full stack of the product.</p><p>• 2+ years building production backend systems — REST APIs, authentication, integrations, background jobs • Strong in at least one modern backend stack: Python, Node.js, Go, Java or similar • Solid relational database skills — schema design, constraints, indexes, migrations. Comfortable writing SQL, not only ORM calls • Frontend ability — React or a modern JavaScript framework, sufficient to build and ship user-facing features • Proven ownership of features from specification through to production • Clear written English • Bachelor's degree in Computer Science, Engineering, or equivalent practical experience Preferred: • Python / FastAPI — the primary backend stack for this role • Next.js / React • PostgreSQL, and Supabase or another Postgres-based BaaS • Row-Level Security • Migration discipline (Alembic or equivalent) • Async programming • Third-party API integration under real constraints • Cloud deployment, monitoring and CI/CD Candidates who have moved into DevOps or platform engineering and no longer write application code daily, or who prefer backend-only roles with no frontend involvement, are unlikely to be a good match. Applicants should state in the first line of their application: the backend service they are most proud of — the stack used, what it did, and a repository link if public. Applications that do not include this will not be reviewed.</p>