وظائف ميكانيكى سفن

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><br></p><p>Below are the open positions:</p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Mechanical Engineering.</li><li>8+ years of experience in Estimation &amp; Proposal writing</li><li>Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</li><li>Strong knowledge of international codes and standards</li><li>Familiarity with local construction codes and regulations.</li><li>Working knowledge of PDO, OQ, and Oxy specifications.</li><li>Experience in contract processing and contract management.</li><li>GCC / Oman experience is a must</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Position -&nbsp;</strong>Building Delivery Manager&nbsp;<br> <strong>Location - </strong>Oman , Muscat<br> <strong>Start Date - </strong>September 2026<br> <strong>Duration - </strong>12 months renewable contract <br><strong>Key Responsibilities :</strong><br> • Manage end-to-end delivery of assigned buildings and facilities.<br> • Coordinate engineering, procurement, construction and commissioning interfaces.<br> • Monitor contractor performance, progress and schedule adherence.<br> • Lead multidisciplinary coordination meetings and follow up action items.<br> • Track engineering deliverables, approvals and construction readiness.<br> • Monitor procurement status and material availability.<br> • Ensure compliance with HSE and QA/QC requirements.<br> • Drive punch list closure and commissioning readiness activities.<br> • Escalate risks, delays and recovery plans to project management.<br> • Support mechanical completion and handover activities.<br> <strong>Required Experience :<br></strong> • Significant experience in building, infrastructure or industrial facility delivery.<br> • Previous EPC project experience.<br> • Oil &amp; Gas, LNG, Petrochemical or Heavy Industrial project background highly preferred.<br> • Strong understanding of engineering, procurement, construction and commissioning activities.<br> • Experience overseeing contractor and subcontractor performance.<br> • Knowledge of HSE, QA/QC and project controls.<br> • Strong stakeholder management and communication skills.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<p>POSITION SUMMARY Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 3 years of related work experience. Supervisory Experience: No supervisory experience.</p><p>License or Certification: EPA Universal Certification Driver's License HVAC Certification</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Shift Technician (Buggy &amp; Generator), I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness.</p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and ensure full knowledge and active participation of all our brand initiatives.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong><br>As Shift Technician, I will assume full responsibility for the efficient operation in the following:&nbsp;<br>• Evaluates mechanical, electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer and materials.&nbsp;<br>• Develops mechanical and electromechanical products by studying customer requirements.&nbsp;<br>• Assures system and product quality by designing testing methods; tests finished product and system capabilities; confirms fabrication, assembly, and installation processes.&nbsp;<br>• Controls maintenance tools, stores and equipment and ensure there is continuous cover of the machinery and equipment in case of breakdowns.&nbsp;<br>• Ensure the efficient and economic operation of the Generators and Buggy<br>• Giving solutions to any engineer for any Engineering related issue<br>• Assist the engineering Manager with reporting and technical issues<br>• Ensure that the budget is adhered to and costs are strictly controlled.&nbsp;<br>• Supporting the sustainability department on how we are to be self-sustainable and Cost saving<br>• Coordinate with engineering coordinator related with material order<br>• Control and monitor consumption of materials and asset.<br>• Keeps record of assignments and produce detailed work reports.&nbsp;<br>• Maintains working area and makes sure that all working areas remain clean at all times.&nbsp;<br>• Uses personal safety wares for personal safety while on duty.&nbsp;<br>• Upkeep Six Senses guidelines and standards of service and operation. My performance benchmarks are maintained and exceeded.&nbsp;<br>• Strictly adhere to LQA standards and guest comments.&nbsp;</p><br><p><strong>Qualifications</strong><br>To execute the position of Shift Technician&nbsp;, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><p>• High school diploma or equivalent and/or valid license to practice mechanical engineering and at least 1 year experience in a similar setting.&nbsp;<br>• Technical skills include the ability to analyze and design projects of limited complexity and scope. Knowledge in blueprint reading and installing of machines, wiring and equipment and basic mechanical skills are mandatory.<br>• I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</p><br><p><i>The above is intended to provide an overview of the role and responsibilities for a Shift Technician at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent to the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211667&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Artificial Lift&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<ul><li>Leverage relevant technical knowledge and experience to contribute to the effective design, procurement and delivery of technical goods and services including Primary and Secondary electrical and instrumentation substation equipment and services.</li><li>Preventive and corrective maintenance, documentation, and maintenance management of bulk handling systems including truck unloaders, conveyor systems, stacker, mobile hoppers, and ship loader for pet coke and sulphur handling.</li><li>Develop and implement preventive, predictive and corrective maintenance plans for electrical and instrumentation systems.</li><li>Manage manpower, materials, and support automation and electrical systems such as Substation, PLCs, drives, instruments.</li><li>Maintain and update SAP based work orders, job plans and maintenance records.</li><li>Coordinate troubleshooting and root cause analysis for recurring issues on stackers, conveyors and ship loaders.</li><li>Handle operation, maintenance and troubleshooting for 11kv/440v substation with SCADA control.</li><li>Handle operation, maintenance and troubleshooting for F & G system, FACP & CACP systems.</li><li>Handle operation, maintenance, calibration & troubleshooting for field instruments, transmitters, flowmeters.</li><li>Handle operation, maintenance and troubleshooting for VFD, Siemens S7 series DCS/PLC systems.</li><li>Supervise maintenance teams during shutdowns, overhauls and emergency breakdowns.</li><li>Ensure adequate availability of spare parts, consumables and tools.</li><li>Provide comprehensive technical support to the E & I manager relevant to discipline.</li><li>Establish and maintain professional working relationship with all internal and external stakeholders for successful project delivery.</li><li>Actively contribute to planning, scoping and estimating for projects, bids and tenders.</li><li>Manage and control site documentation & safety related permit system.</li><li>Oversee day to day operation of bulk material handling systems for pet coke & sulphur.</li><li>Coordinate with operations control room and field teams to ensure smooth equipment performance.</li><li>Monitor system parameters throughput and equipment health to minimize downtime.</li><li>Ensure adherence to standard operating procedures (SOPs) and safety standards.</li><li>Ensure all operations and maintenance activities comply with Delta HSE policies and procedures.</li><li>Conduct safety risk assessments, toolbox talks and permit to work inspections.</li><li>Promote a culture of safety, housekeeping and environmental awareness among team members.</li><li>Monitor compliance to applicable industry standards, codes and regulatory requirements.</li><li>Propose ideas and take actions to improve team delivery and business needs.</li><li>Contribute to innovative and practical ways to meet business needs.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor of Engineering (Electrical and Electronics) with certified CEP/AEP.</li><li>Diploma in Electrical & Electronics/Instrumentation with certified CEP/AEP.</li><li>7 -10 years work experience in Port/ Plant / MEPF / Utility Maintenance.</li><li>10 -13 years work experience in Port/ Plant / MEPF / Utility Maintenance (Diploma holders).</li><li>Comprehensive knowledge of installation and operation of common Primary and Secondary electrical equipment and systems used in High Voltage Transmission or Distribution Substations.</li><li>Working understanding of project management principles.</li><li>Ability to prepare and maintain maintenance logs, calibration reports as per company and regulatory requirements.</li><li>Knowledge about fire and gas system.</li><li>Knowledge of requirements for effective scoping, sourcing, procuring and managing of suppliers and service providers.</li><li>Knowledge and understanding of applicable standards, codes and regulatory requirements.</li><li>Comprehensive knowledge of Work Health and Safety requirements.</li><li>Experience managing end to end procurement of technical goods and services with positive outcomes.</li><li>Hands-on experience with PLCs (Siemens, ABB), SCADA systems, and various industrial drives (WEG).</li><li>Experience in calibration, maintenance planning, and safety systems management.</li><li>Familiarity with communication protocols such as Profibus, Profinet, and Modbus.</li><li>Experience managing stackers, reclaimers, wagon loaders, silo and ship loader troubleshooting & maintenance.</li><li>Demonstrates learning agility and continuous improvement.</li><li>Commitment to positive Health & Safety culture.</li><li>Strong decision quality, balancing stakeholder needs, managing complexity.</li><li>Planning and prioritizing work.</li><li>Action oriented with urgency and enthusiasm.</li><li>Ensures accountability for self and others.</li><li>Effective communication and collaboration skills.</li><li>Ability to build networks and partnerships.</li><li>Instills trust through honesty, integrity, authenticity.</li><li>Manages ambiguity and situational adaptability.</li></ul>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>

<br><ul><li><p>Coordinate with vessel masters, ship crews, shipping agents, and port authorities.</p></li><li><p>Handle shipping documentation, including bills of lading, cargo manifests, delivery orders, and other relevant documents.</p></li><li><p>Assist with vessel arrival and departure formalities.</p></li><li><p>Coordinate cargo loading, unloading, and transportation activities.</p></li><li><p>Monitor vessel schedules, port calls, and shipment status.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Basic knowledge of shipping documentation and port operations is an advantage.</p></li><li><p>Good communication, coordination, and organizational skills.</p></li><li><p>Proficiency in MS Office and email correspondence.</p></li><li><p>Ability to work under pressure and coordinate with multiple stakeholders.</p></li></ul>

<p><strong>JOB PURPOSE :</strong><br></p><p>To coordinate the daily ship-to-ship (STS) transfer operations of the Portline STS Desk, ensuring that vessels, agents, vendors, service boats, STS equipment and the POAC are arranged on time for each operation, that all parties are kept updated, and that every job is correctly costed, documented and closed to Accounts. </p><br><p><strong>KEY RESPONSIBILITIES</strong>&nbsp;<br></p><p><strong>2.1 Daily Operations</strong>&nbsp;</p><ul><li><p>Coordinate daily STS operations with vessels, agents and vendors to ensure smooth operations.&nbsp;</p></li></ul><ul><li><p>Plan and coordinate the mobilisation and demobilisation of fenders and STS gear based on vessel readiness and ETA.&nbsp;</p></li></ul><ul><li><p>Send operational updates to all concerned parties – clients, vessels, agents, vendors and the internal team.&nbsp;</p></li></ul><ul><li><p>Book service boats through the vessel agent or directly with the boat operator, as required by the operation.&nbsp;</p></li></ul><p><strong>2.2 POAC Arrangements</strong>&nbsp;</p><ul><li><p>Arrange ticketing, travel, visa and transport for POAC arrival and departure.&nbsp;</p></li></ul><ul><li><p>Arrange hotel accommodation and all other logistics so that the POAC arrives and departs without delays.&nbsp;</p></li></ul><ul><li><p>Coordinate POAC movements in line with vessel ETA and changes to the operation schedule.&nbsp;</p></li></ul><p><strong>2.3 Job Costing and File Closure</strong>&nbsp;</p><ul><li><p>Book the costs of each job against that job on a daily basis.&nbsp;</p></li></ul><ul><li><p>Close each job file and submit it to Accounts with complete supporting documents.&nbsp;</p></li></ul><p><strong>2.4 Documentation</strong>&nbsp;</p><ul><li><p>Analyse pre-arrival operational documents for each STS operation and report any gaps to the Operations Head before vessel arrival.&nbsp;</p></li></ul><ul><li><p>Analyse post-operation documents for each STS operation and confirm they are complete.&nbsp;</p></li></ul><ul><li><p>After each STS operation, collect the SOF, the signed documents from the vessels and the POAC, and the Quality Questionnaire (QQ), and attach them to the job file.&nbsp;</p></li></ul><ul><li><p>Maintain the STS operations checklists for each job.&nbsp;</p></li></ul><p><strong>2.5 General</strong>&nbsp;</p><ul><li><p>Follow company policies, QHSE requirements and Portline STS procedures at all times.&nbsp;</p></li></ul><ul><li><p>Perform other operational duties as assigned by the Operations Head or management.&nbsp;</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or bachelor's degree in Shipping, Logistics, Maritime Studies, Business Administration or a related field.&nbsp;</p></li></ul><ul><li><p>Experience in STS operations, shipping agency or marine operations is preferred.&nbsp;</p></li></ul><ul><li><p>Familiarity with STS documentation, POAC/crew travel logistics and job costing will be an advantage.&nbsp;</p></li></ul><ul><li><p>GCC experience preferred; valid driving licence an advantage.&nbsp;</p></li></ul><br><p><strong>KILLS AND COMPETENCIES</strong>&nbsp;<br></p><ul><li><p>Working knowledge of STS operations, fenders and STS equipment.&nbsp;</p></li></ul><ul><li><p>Strong coordination, planning and follow-up skills.&nbsp;</p></li></ul><ul><li><p>Good verbal and written communication in English.&nbsp;</p></li></ul><ul><li><p>Good working knowledge of MS Office – Excel, Word and Outlook.&nbsp;</p></li></ul><ul><li><p>Accuracy in documentation, job costing and record keeping.&nbsp;</p></li></ul><ul><li><p>Ability to work under pressure and handle changing ETAs and operational requirements.&nbsp;</p></li></ul><ul><li><p>Willingness to work flexible hours and respond outside office hours when operations require.</p></li></ul>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.</p> <p>The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <p><strong>Team leadership & coordination</strong></p> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <p><strong>Documentation & reporting</strong></p> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <p><strong>Technical oversight</strong></p> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <p><strong>Handover & start-up support</strong></p> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor's degree in electrical engineering or equivalent technical qualification.</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <p><strong>Skills & competencies</strong></p> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.</p> <p>The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <p><strong>Team leadership & coordination</strong></p> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <p><strong>Documentation & reporting</strong></p> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <p><strong>Technical oversight</strong></p> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <p><strong>Handover & start-up support</strong></p> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor's degree in electrical engineering or equivalent technical qualification.</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <p><strong>Skills & competencies</strong></p> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>