وظائف مهندس تفتيش هندسي في سلطنة عمان

<p><b>Brief Posting Description </b></p> <p>The Engineer Inspection &amp; Condition Monitoring is supporting in developing, implementing, and continuously improving the condition monitoring, predictive maintenance, asset inspection, and integrity management programs across mining, processing, utilities, and infrastructure assets. The role ensures that equipment health is effectively monitored using predictive technologies and inspection methodologies to identify potential failures, optimize maintenance strategies, improve equipment reliability, and maximize asset availability.</p> <p>The position provides support to technical leadership in vibration analysis, thermography, lubrication analysis, ultrasound testing, nondestructive testing (NDT), asset integrity management, reliability improvement initiatives, and risk-based inspection programs. The role supports maintenance, reliability, operations, and project teams through data-driven decision-making, equipment condition assessment, failure prevention, and continuous improvement programs to achieve world-class asset performance and operational excellence.</p> <p>Detailed Description </p> <p>CONDITION MONITORING PROGRAM MANAGEMENT</p> <p>Support in developing, implementing, and continuously improving the site-wide condition monitoring program.</p> <p>Support in establishing predictive maintenance strategies for critical plant and mobile equipment.</p> <p>Support in developing equipment monitoring routes, inspection plans, and asset health assessment methodologies.</p> <p>Ensure effective utilization of condition monitoring technologies to detect early-stage equipment deterioration.</p> <p>Review asset condition data and provide recommendations to prevent equipment failures.</p> <p>Establish inspection frequencies, alarm limits, and monitoring standards.</p> <p>Ensure condition monitoring activities are aligned with reliability and asset management objectives.</p> <p>Support digitalization initiatives relating to equipment health monitoring and predictive analytics.</p> <p>VIBRATION ANALYSIS &amp; MACHINERY DIAGNOTICS</p> <p>Perform vibration monitoring and analysis activities for rotating equipment.</p> <p>Conduct advanced vibration diagnostics and fault identification.</p> <p>Identify bearing defects, misalignment, imbalance, looseness, resonance, gear defects, and mechanical degradation.</p> <p>Establish vibration baselines and equipment health indices.</p> <p>Develop corrective action recommendations based on vibration analysis findings.</p> <p>Provide technical guidance to maintenance teams regarding equipment condition and required interventions.</p> <p>Monitor effectiveness of corrective actions and maintenance outcomes.</p> <p>THERMOGRAPHY AND INFRARED INSPECTION</p> <p>Execute and manage infrared thermography inspection programs.</p> <p>Conduct thermal condition assessments of electrical, mechanical, and process equipment.</p> <p>Identify abnormal temperature conditions and potential equipment failures.</p> <p>Verify corrective actions through follow-up thermal inspections.</p> <p>Maintain thermal imaging databases and inspection records.</p> <p>Develop thermography inspection standards and reporting requirements.</p> <p>LUBRICATION AND OIL ANALYSIS MANAGEMENT</p> <p>Execute lubrication excellence and oil analysis programs.</p> <p>Monitor lubricant condition, contamination levels, wear metals, and fluid degradation.</p> <p>Establish oil sampling schedules and testing requirements.</p> <p>Analyze laboratory reports and recommend corrective maintenance actions.</p> <p>Optimize lubrication practices and lubricant selection strategies.</p> <p>Support contamination control and machine health improvement initiatives.</p> <p>ULTRASOUND AND ADVANCED PREDICTIVE TECHNOLOGIES</p> <p>Manage ultrasound inspection activities for mechanical, electrical, and process systems.</p> <p>Conduct inspections for compressed air leaks, steam leaks, bearing defects, and electrical discharge.</p> <p>Evaluate and implement advanced predictive maintenance technologies where applicable.</p> <p>Support development of asset health monitoring systems and online condition monitoring solutions.</p> <p>Identify opportunities to improve predictive maintenance effectiveness.</p> <p>INSPECTION &amp; ASSET INTEGRITY MANAGEMENT</p> <p>Support in developing inspection strategies and risk-based inspection programs for fixed and rotating assets.</p> <p>Ensure inspection activities comply with applicable engineering standards, statutory requirements, and company procedures.</p> <p>Coordinate internal and external inspection activities.</p> <p>Develop statutory inspection programs for pressure vessels, tanks, pipelines, lifting equipment, and critical structures.</p> <p>Coordinate thickness monitoring and corrosion management programs.</p> <p>Manage inspection intervals and equipment integrity risk assessments.</p> <p>Ensure compliance with API, ASME, ISO, and applicable regulatory inspection requirements.</p> <p>Support Fitness-for-Service (FFS) assessments and equipment life extension studies</p> <p>Review inspection findings and assess equipment fitness for service.</p> <p>Monitor asset degradation mechanisms and recommend mitigation actions.</p> <p>Support asset integrity assessments and life extension studies.</p> <p>Maintain inspection records, reports, and regulatory compliance documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Asset Management, Industrial Engineering, or equivalent discipline.</p> <p><b>Experience:</b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in condition monitoring, inspection, reliability engineering, asset integrity, and predictive maintenance within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p>Certifications: Mandatory: Vibration Analysis Certification (ISO CAT II minimum).</p> <p>Added Advantage:</p> <p> ISO CAT III or IV Vibration Analyst,</p> <p> ISO 18436 Condition Monitoring Certifications,</p> <p> Infrared Thermography Certification Level I/II,</p> <p> Ultrasound Certification Level I/II,</p> <p> ASNT NDT Level II/III,</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Inspection &amp; Condition Monitoring is supporting in developing, implementing, and continuously improving the condition monitoring, predictive maintenance, asset inspection, and integrity management programs across mining, processing, utilities, and infrastructure assets. The role ensures that equipment health is effectively monitored using predictive technologies and inspection methodologies to identify potential failures, optimize maintenance strategies, improve equipment reliability, and maximize asset availability.</p> <p>The position provides support to technical leadership in vibration analysis, thermography, lubrication analysis, ultrasound testing, nondestructive testing (NDT), asset integrity management, reliability improvement initiatives, and risk-based inspection programs. The role supports maintenance, reliability, operations, and project teams through data-driven decision-making, equipment condition assessment, failure prevention, and continuous improvement programs to achieve world-class asset performance and operational excellence.</p> <p>Detailed Description </p> <p>CONDITION MONITORING PROGRAM MANAGEMENT</p> <p>Support in developing, implementing, and continuously improving the site-wide condition monitoring program.</p> <p>Support in establishing predictive maintenance strategies for critical plant and mobile equipment.</p> <p>Support in developing equipment monitoring routes, inspection plans, and asset health assessment methodologies.</p> <p>Ensure effective utilization of condition monitoring technologies to detect early-stage equipment deterioration.</p> <p>Review asset condition data and provide recommendations to prevent equipment failures.</p> <p>Establish inspection frequencies, alarm limits, and monitoring standards.</p> <p>Ensure condition monitoring activities are aligned with reliability and asset management objectives.</p> <p>Support digitalization initiatives relating to equipment health monitoring and predictive analytics.</p> <p>VIBRATION ANALYSIS &amp; MACHINERY DIAGNOTICS</p> <p>Perform vibration monitoring and analysis activities for rotating equipment.</p> <p>Conduct advanced vibration diagnostics and fault identification.</p> <p>Identify bearing defects, misalignment, imbalance, looseness, resonance, gear defects, and mechanical degradation.</p> <p>Establish vibration baselines and equipment health indices.</p> <p>Develop corrective action recommendations based on vibration analysis findings.</p> <p>Provide technical guidance to maintenance teams regarding equipment condition and required interventions.</p> <p>Monitor effectiveness of corrective actions and maintenance outcomes.</p> <p>THERMOGRAPHY AND INFRARED INSPECTION</p> <p>Execute and manage infrared thermography inspection programs.</p> <p>Conduct thermal condition assessments of electrical, mechanical, and process equipment.</p> <p>Identify abnormal temperature conditions and potential equipment failures.</p> <p>Verify corrective actions through follow-up thermal inspections.</p> <p>Maintain thermal imaging databases and inspection records.</p> <p>Develop thermography inspection standards and reporting requirements.</p> <p>LUBRICATION AND OIL ANALYSIS MANAGEMENT</p> <p>Execute lubrication excellence and oil analysis programs.</p> <p>Monitor lubricant condition, contamination levels, wear metals, and fluid degradation.</p> <p>Establish oil sampling schedules and testing requirements.</p> <p>Analyze laboratory reports and recommend corrective maintenance actions.</p> <p>Optimize lubrication practices and lubricant selection strategies.</p> <p>Support contamination control and machine health improvement initiatives.</p> <p>ULTRASOUND AND ADVANCED PREDICTIVE TECHNOLOGIES</p> <p>Manage ultrasound inspection activities for mechanical, electrical, and process systems.</p> <p>Conduct inspections for compressed air leaks, steam leaks, bearing defects, and electrical discharge.</p> <p>Evaluate and implement advanced predictive maintenance technologies where applicable.</p> <p>Support development of asset health monitoring systems and online condition monitoring solutions.</p> <p>Identify opportunities to improve predictive maintenance effectiveness.</p> <p>INSPECTION &amp; ASSET INTEGRITY MANAGEMENT</p> <p>Support in developing inspection strategies and risk-based inspection programs for fixed and rotating assets.</p> <p>Ensure inspection activities comply with applicable engineering standards, statutory requirements, and company procedures.</p> <p>Coordinate internal and external inspection activities.</p> <p>Develop statutory inspection programs for pressure vessels, tanks, pipelines, lifting equipment, and critical structures.</p> <p>Coordinate thickness monitoring and corrosion management programs.</p> <p>Manage inspection intervals and equipment integrity risk assessments.</p> <p>Ensure compliance with API, ASME, ISO, and applicable regulatory inspection requirements.</p> <p>Support Fitness-for-Service (FFS) assessments and equipment life extension studies</p> <p>Review inspection findings and assess equipment fitness for service.</p> <p>Monitor asset degradation mechanisms and recommend mitigation actions.</p> <p>Support asset integrity assessments and life extension studies.</p> <p>Maintain inspection records, reports, and regulatory compliance documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education:</b></p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Asset Management, Industrial Engineering, or equivalent discipline.</p> <p>Experience:</p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in condition monitoring, inspection, reliability engineering, asset integrity, and predictive maintenance within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p>Certifications: Mandatory: Vibration Analysis Certification (ISO CAT II minimum).</p> <p>Added Advantage</p> <p> ISO CAT III or IV Vibration Analyst,</p> <p> ISO 18436 Condition Monitoring Certifications,</p> <p> Infrared Thermography Certification Level I/II,</p> <p> Ultrasound Certification Level I/II,</p> <p> ASNT NDT Level II/III,</p> <p><br></p> <p> </p> <p> </p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Profile - Asset & reliability engineer</h4> <p>Asset & reliability engineer to enhance the long-term reliability, performance, and lifecycle efficiency of plant assets. The role focuses on applying reliability engineering principles, data analysis, and continuous improvement practices to improve equipment availability, reduce downtime, and optimize maintenance costs.</p> <h4>Key responsibilities:</h4> <ul> <li>Conduct/facilitate reliability centered maintenance (RCM) workshop</li> <li>Develop equipment criticality rankings</li> <li>Monitor asset performance and identify reliability gaps</li> <li>Lead initiatives to improve equipment reliability and reduce recurring failures</li> <li>Conduct RCA (5-Why, Fishbone, etc.) for equipment failures</li> <li>Implement corrective actions to eliminate repeat breakdowns</li> <li>Optimize PM and PdM strategies based on equipment performance and failure history</li> <li>Support condition monitoring and predictive maintenance implementation</li> <li>Support repair, refurbish, or replacement decisions</li> <li>Analyze downtime, failure trends, MTBF, and MTTR</li> <li>Provide insights to improve equipment reliability and maintenance effectiveness</li> <li>Lead initiatives to reduce downtime and maintenance costs</li> <li>Work with cross-functional teams to improve asset performance</li> <li>Prepare and present reliability KPIs, performance trends, and improvement actions</li> <li>Perform safety critical analysis</li> <li>Understanding of instrumented protective function & SIL class</li> <li>Recommend RBI schedules</li> <li>Support ERP/CMMS and reliability dashboard implementation</li> <li>ISO 14224 hierarchy structuring</li> <li>Read PEFS and other engineering deliverables & extract tags and associated information</li> <li>Prepare function location, task list & long text (maintenance craft procedure)</li> <li>Prepare SPIR</li> <li>Promote use of IoT and condition monitoring tools</li> <li>Prepare engineering data warehouse templates (tag register, tag to document etc.)</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in mechanical</li> <li>Certified reliability engineer (CRE); CMRP or equivalent asset management certification is a must</li> <li>10 years of experience in maintenance, reliability engineering, or asset management in industrial environments (oil & gas) is preferred</li> <li>Reliability engineering & maintenance strategy development</li> <li>Root cause analysis (RCA, 5-Why, Fishbone)</li> <li>Data analysis and reporting (Excel, Power BI, or similar tools)</li> <li>Skilled in ERP/CMMS systems (SAP PM, MAXIMO)</li> <li>Risk based inspection principles</li> <li>Conversant with ISO14224 standard</li> <li>Knowledge of delivering engineering data warehouse</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span><strong>Purpose</strong></span></span><span><span>Lead and manage multi-discipline engineering teams to deliver refinery and petrochemical projects safely, on schedule, within budget, and to the required quality standards. Ensure compliance with Worley Management System requirements and customer specifications.</span></span></p><br><p><span><span><strong>Key Responsibilities</strong></span></span></p><br><ul><li><span><span>Lead engineering execution for Concept, Pre-FEED, FEED, Detailed Design, EPCM and EPC projects.</span></span></li><li><span><span>Manage engineering scope, schedule, budget, resources and technical quality.</span></span></li><li><span><span>Coordinate interfaces between disciplines, licensors, vendors, customers and execution centers.</span></span></li><li><span><span>Lead design reviews, technical assurance, risk management and change management activities.</span></span></li><li><span><span>Support project delivery, customer engagement and business development activities.</span></span></li></ul><p><span><span><strong>Mandatory Experience</strong></span></span></p><br><ul><li><span><span>Minimum <strong>15 years</strong> of engineering experience.</span></span></li><li><span><span>Minimum <strong>10 years' experience on refinery and petrochemical projects</strong>.</span></span></li><li><span><span>Proven experience as <strong>Engineering Manager, Project Engineering Manager or Engineering Lead</strong> on major refinery and petrochemical facilities.</span></span></li><li><span><span>Experience in FEED, Detailed Design, EPCM and/or EPC project delivery.</span></span></li><li><span><span>Demonstrated leadership of multi-discipline engineering teams.</span></span></li></ul><p><span><span><strong>Essential Skills</strong></span></span></p><br><ul><li><span><span>Engineering Management</span></span></li><li><span><span>Technical Assurance</span></span></li><li><span><span>Interface Management</span></span></li><li><span><span>Risk &amp; Change Management</span></span></li><li><span><span>Team Leadership</span></span></li><li><span><span>Customer &amp; Stakeholder Management</span></span></li></ul> <p><span><span><strong>Qualifications</strong></span></span></p><br><ul><li><span><span>Bachelor’s Degree in Engineering.</span></span></li><li><span><span>Chartered Engineer or equivalent preferred.</span></span></li></ul><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<p>Job Description The Building Delivery Manager is the Client focal point responsible for safe, timely and quality delivery of assigned project buildings and associated facilities, from engineering and procurement through construction, pre-commissioning, commissioning support and handover. The role provides delivery assurance, supervision and close follow-up of contractors, coordinates multidisciplinary interfaces, identifies blockers early, and drives clear corrective actions with owners and due dates to protect schedule, HSE, quality and handover readiness. Site-based role with daily interface with construction, engineering, procurement, planning, HSE, QA/QC, commissioning and operations representatives. Covers end-to-end delivery of assigned buildings, including engineering maturity, procurement readiness, construction progress, quality control, HSE performance, pre-commissioning and commissioning readiness. Lead weekly multidisciplinary meetings and ensure decisions, actions, owners and due dates are recorded and followed until closure. Escalates delivery risks, blockers and deviations through factual reporting and recommended management actions. Maintain a consolidated view of delivery status for assigned buildings from engineering through commissioning handover. Follow up contractors' mobilization, staffing, site organization, workface readiness and execution priorities. Track engineering deliverables, technical queries, approvals, design maturity and field engineering support required for construction continuity. Monitor procurement and material availability for equipment, bulk materials, construction packages and subcontracted scopes affecting site progress. Monitor construction execution, productivity, progress measurement, look-ahead planning, constraints and recovery actions. Verify that HSE requirements are understood and implemented, with prompt follow-up of observations, incidents and corrective actions. Verify quality implementation, including inspection readiness, NCR management, punch list closure and compliance with approved specifications and procedures. Coordinate construction completion, mechanical completion, system prioritization and handover sequence with commissioning stakeholders. Provide concise reporting to Client management on schedule, progress, risks, HSE, quality, blockers, contractor performance and required decisions.</p><p><strong>Desired Candidate Profile</strong></p><p>Significant experience in building, infrastructure, industrial facilities or EPC project delivery, preferably in oil and gas, LNG, petrochemical or heavy industrial projects. Strong multidisciplinary coordination experience covering engineering, procurement, construction and commissioning interfaces. Demonstrated ability to challenge contractor plans, identify delivery risks and drive timely corrective actions. Good understanding of HSE, QA/QC, construction planning, progress measurement and mechanical completion principles. Strong communication skills, with the ability to report clearly, escalate factually and coordinate stakeholders without direct line authority. Site-based mindset, hands-on follow-up and strong discipline in action tracking and closure.</p>

<ul><li><p>Supervise wind turbine erection, installation, mechanical completion, and associated balance-of-plant activities.</p></li><li><p>Review wind-related technical submissions, drawings, specifications, method statements, inspection plans, commissioning procedures, and test records.</p></li><li><p>Monitor construction quality, installation progress, logistics, interface constraints, and technical compliance for wind farm works.</p></li><li><p>Witness wind turbine inspections, commissioning tests, reliability runs, and performance verification activities.</p></li><li><p>Coordinate interfaces with civil, electrical, grid, planning, QA/QC, HSE, and commissioning teams.</p></li><li><p>Support review of wind plant performance data, availability records, technical issues, punch lists, and close-out documentation.</p></li><li><p>Provide discipline input to progress reports, technical meetings, risk reviews, and project close-out activities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related technical discipline.</p></li><li><p>Minimum 10 years of experience in wind turbine technology, wind farm construction, erection supervision, commissioning, or technical advisory roles.</p></li><li><p>Experience on utility-scale wind projects is required; Owner’s Engineer, PMC, LTA, or EPC supervision experience is preferred.</p></li><li><p>Familiarity with wind turbine installation, inter-array grid works, SCADA, reliability testing, availability assessment, and performance verification.</p></li><li><p>Knowledge of IEC 61400 standards and wind performance testing requirements is preferred.</p></li><li><p>Strong technical reporting, coordination, site supervision, and problem-solving skills.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To perform and actively engage in civil works related to the construction, maintenance, and repair of civil structures within ADC premises. This includes executing assigned tasks in accordance with approved drawings, technical specifications, and project requirements with strict adherence to ADC s health, safety, and environmental (HSE) policies is required to ensure a safe working environment and compliance with all applicable regulations</p><p>KEY ACCOUNTABILITIES:</p><p>Day to Day Operations</p><ul><li>Perform onsite day to day civil works repair, surveying works, Maintaining the Inspection checklists, building and maintenance works such as damages in dry dock structures repair, yard pavement repair, production shops building and plants structure repair, crane rail maintenance and repair, utility pipe leakage repair, utility trench &amp; manhole maintenance.</li><li>Works includes also machine and tools operations, construction of new structures such as shelters for machines, generators and other civil related works in ADC premises.</li></ul><p>Coordination</p><ul><li>Coordinate with the Civil maintenance Foreman on all technical areas such as use of equipment, civil works process and technical drawings and sketches in order to ensure the projected schedule will be met.</li></ul><p>Material Requirements and Use</p><ul><li>Coordinate with the Civil maintenance Foreman if and when required by the civil maintenance section in order to ensure the materials/tools/equipment are provided timely and accurately to complete job requirements.</li><li>Also, control the use of materials in order to minimize losses.</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul><p>Quality, HSSE</p><ul><li>Adhere to and ensure compliance with all relevant health, safety, security and environment procedures, standards, controls and systems across ODC to guarantee employee safety and security, compliance with quality &amp; procedures, and a responsible environmental attitude.</li></ul><p>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Certificate training for civil works</li><li>3 years of relevant experience in civil maintenance/construction jobs.</li><li>Knowledge and understanding of the civil construction/maintenance system and how to implement.</li><li>Adherence to safety policies/procedures</li><li>Communication and interpersonal skills</li><li>Exposure to ISO 9001:2015 standards</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br>Country Sales Manager / BDM <br><br>Sector: Drilling, drilling contracting, oil and gas <br><br>Work Location: Muscat, Oman<br><br>Estimated Salary: OMR 1.5K to 3K per month (total cash lump sum package) + Family: medical insurance, annual flights, visa + Bonus (performance based)<br><br><br><br>Role Overview:<br><br>We are seeking an experienced Sales Manager / Business Development Manager to lead the growth and commercial performance of a drilling services business unit based in Muscat, Oman. The successful candidate will be responsible for driving sales, managing key client relationships, overseeing business development activities, and supporting the overall profitability and operational success of the drilling division.<br><br>Required Profile:<br><br><br>Overall 20 years maximum career experience. Anything higher will be deemed too senior for the role's needs.Must have proven experience within the drilling industry, ideally gained through hands-on operational, technical, maintenance, servicing, or commercial roles.<br><br><br><br>Must have progressed in career up to Sales Manager or Account Manager or BDM where the focus and responsibilities shifted to technical sales.<br>Strong understanding of drilling rigs, drilling equipment, drill pipes, and related services.Experience with rig maintenance, inspection, refurbishment, repair, or servicing activities is highly desirable (e.g., CAT III Inspection, CAT IV Refurbishment).Exposure to onshore and/or offshore drilling operations, preferably within the Middle East.Commercially minded with a solid understanding of business performance metrics, cash flow management, and P&amp;L responsibility.Strong client-facing, relationship management, and leadership capabilities.Capable of managing both business development initiatives and day-to-day business operations.<br><br><br> <br><br><br> <br><br> <br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Sales Manager, Business Development Manager, Drilling equipment, Drilling rig, Maintenance, Refurbishment, Inspection, Cat 3, Cat 4<br> </div>

<p>Greeting From TQcert (Tata Projects) ! We Have Requirement With Our Reputed Client.</p><p>Position: Welding Engineers Location: Sohar - Oman Benefits: Salary + FAT + Other benefits.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or Diploma.</li><li>Professional certifications such as: AWS Certified Welding Inspector (CWI) (preferred) International Welding Engineer (IWE) (preferred) CSWIP 3.1/3.2 (advantageous)</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>

<p><b>Job title </b>Logistics &amp; Materials Engineer Grade Stream Upstream E&amp;P Function Well Delivery Department Operated Asset Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Well Delivery Support Manager Direct Reports - Job purpose The Materials &amp; Logistics Engineer is responsible for planning, coordinating, and controlling materials and logistics activities to ensure that all required materials are available on time, meet technical and quality requirements, and support project schedules. The role supports drilling, workover, and well intervention operations by working closely with engineering, procurement, vendors, logistics providers, and site teams to ensure smooth project execution. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities Review material requisitions and technical specifications to ensure compliance with company and project standards. Coordinate with drilling and engineering teams to address technical queries, material substitutions, and deviations. Ensure materials are procured, stored, and handled according to approved specifications, procedures, and industry standards. Maintain accurate material traceability, certifications, and documentation throughout the supply chain. Support the technical evaluation of vendors and materials when required. Review scopes of work related to materials, inspection, transportation, and quality control to ensure alignment with oil and gas industry best practices. Coordinate material receiving, inspection, storage, preservation, and issuance activities. Plan and manage inbound and outbound logistics, including transportation, shipping, and customs clearance, in line with OPAL standards. Ensure timely delivery of materials to warehouses, yards, and project sites according to project schedules. Monitor inventory levels and support stock optimization to prevent shortages or excess materials. Ensure proper identification, tagging, and preservation of materials to avoid damage or deterioration. Support periodic inventory audits and reconciliation processes. Interface with procurement, contracts, QA/QC, drilling, construction, and operations teams. Prepare and provide materials and logistics status reports to project management. Support expediting activities to ensure vendors and logistics providers meet agreed milestones. Participate in project planning and coordination meetings related to materials and logistics. Coordinate with well delivery team members to identify critical materials that must be prioritized for transportation. Ensure all activities comply with company supply chain policies, HSSE requirements, and quality management systems. Identify opportunities to improve logistics efficiency, material handling processes, and cost effectiveness. Ensure hazardous and non-hazardous materials are correctly labeled, packaged, and returned to base in accordance with environmental regulations. Contribute to lessons learned and continuous improvement initiatives. Use materials management and inventory systems to track material orders, consumption, and stock levels in real time. Key interactions Internal: Upstream External : Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed. Education requirements Minimum qualification is a bachelor s degree in mechanical engineering or equivalent. Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 5+ years relevant experience in similar role Understanding of materials management and drilling procedures. Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software Soft: Attention to detail and high level of accuracy. Able to lead discussions credibly and effectively negotiate resolutions. Previous experience working with a diversified workforce, with good people skills Highly organized, detail-oriented and able to work independently. Strong Communication skills and coordination skills (including verbal and written). Analytical and problem solving skills. Technical: Very good knowledge in using material management software. Excellent business and technical report writing skills Deep working understanding of material management and operations Planning and Reporting skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum qualification is a bachelor s degree in mechanical engineering or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>5+ years relevant experience in similar role</li><li>Understanding of materials management and drilling procedures.</li><li>Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software</li><li>Attention to detail and high level of accuracy.</li><li>Able to lead discussions credibly and effectively negotiate resolutions.</li><li>Previous experience working with a diversified workforce, with good people skills</li><li>Highly organized, detail-oriented and able to work independently.</li><li>Strong Communication skills and coordination skills (including verbal and written).</li><li>Analytical and problem solving skills.</li><li>Very good knowledge in using material management software.</li><li>Excellent business and technical report writing skills</li><li>Deep working understanding of material management and operations</li><li>Planning and Reporting skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To supervise, coordinate, and control all scaffolding activities within the fabrication yard, ensuring safe erection, modification, inspection, maintenance, and dismantling of scaffolds in compliance with project specifications, statutory regulations, and company HSE requirements.</p><br><br><span>Scaffolding</span> <span>Operations</span><ul><li><span>Supervise</span> <span>scaffold</span> <span>erection,</span> <span>alteration,</span> <span>and</span> <span>dismantling</span> <span>activities</span> <span>across</span> <span>fabrication,</span> <span>assembly,</span> <span>outfitting,</span> <span>blasting,</span> <span>painting,</span> <span>and</span> <span>load-out</span> <span>areas.</span></li><li><span>Ensure</span> <span>scaffolding</span> <span>works</span> <span>are</span> <span>executed</span> <span>according</span> <span>to</span> <span>approved</span> <span>drawings,</span> <span>method</span> <span>statements,</span> <span>and</span> <span>project</span> <span>requirements.</span></li><li><span>Allocate</span> <span>manpower,</span> <span>tools,</span> <span>and</span> <span>equipment</span> <span>to</span> <span>achieve</span> <span>daily</span> <span>production</span> <span>targets.</span></li><li><span>Coordinate</span> <span>with</span> <span>Construction,</span> <span>QA/QC,</span> <span>Planning,</span> <span>and</span> <span>HSE</span> <span>teams</span> <span>to</span> <span>ensure</span> <span>uninterrupted</span> <span>work</span> <span>execution.</span></li><li><span>Monitor</span> <span>scaffold</span> <span>material</span> <span>utilization</span> <span>and</span> <span>prevent</span> <span>loss,</span> <span>damage,</span> <span>or</span> <span>misuse.</span></li></ul><span>Safety</span> <span>&amp;</span> <span>Compliance</span><ul><li><span>Ensure</span> <span>full</span> <span>compliance</span> <span>with</span> <span>company</span> <span>HSE</span> <span>procedures,</span> <span>client</span> <span>requirements,</span> <span>and</span> <span>international</span> <span>scaffolding</span> <span>standards.</span></li><li><span>Conduct</span> <span>toolbox</span> <span>talks,</span> <span>pre-job</span> <span>briefings,</span> <span>and</span> <span>safety</span> <span>awareness</span> <span>sessions.</span></li></ul><br> </div>

<p><strong>JOB DESCRIPTION</strong></p><p><strong>BASIC INFORMATION</strong></p><ul><li>Position Name: Mechanical Technician</li><li>Function: Operations &amp; Maintenance</li><li>Job Code: </li><li>Department: Plant</li><li>Section: Maintenance</li><li>Location: Plant</li><li>Reporting To (Functional Title): Mechanical Maintenance Lead</li><li>Number of Direct Reports: N/A</li></ul><p><strong>ROLE PURPOSE</strong></p><p>is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets.</p><p><strong>ACCOUNTABILITIES AND RESPONSIBILITIES</strong></p><ul><li>Troubleshooting Faulty Machinery: Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities.</li><li>Mechanical Preventive and Corrective maintenance: performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems.</li><li>Contractor Management: Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements.</li><li>Collaboration on Complex Mechanical Issues: Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs.</li><li>SOP &amp; Manual Update and Development: Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards.</li><li>Document Maintenance and Repairs Daily Log: Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs.</li><li>Coaching New Hires: Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques.</li><li>Safety Compliance: Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly.</li><li>Technical Skills: Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems.</li><li>Health, Safety &amp; Quality: Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance.</li><li>Continuous Improvement: Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development.</li></ul><p><strong>COMMUNICATION CHANNELS</strong></p><ul><li>Internal: Mechanical Maintenance Lead, Maintenance Team, Operations Team</li><li>External: Contractors, Suppliers</li></ul><p><strong>ROLE REQUIREMENTS</strong></p><p><strong>Educational &amp; Professional Qualifications and Experience</strong></p><ul><li>Minimum Qualifications: Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>Minimum Experience: 3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Skills and Competencies: Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> MEP Coordinator<p><strong>Location:</strong> Muscat, Oman<br><strong>Industry:</strong> Construction / Project Management / Mixed-Use Development<br><strong>Employment Type:</strong> Full-Time</p><br><br>About the Role<p>We are seeking an experienced <strong>MEP Coordinator</strong> to join a prestigious large-scale mixed-use development project in Oman. The successful candidate will oversee the coordination, execution, and delivery of Mechanical, Electrical, and Plumbing (MEP) works throughout the project lifecycle, ensuring compliance with international standards, project specifications, quality requirements, and construction schedules.</p><br><br><p>This role requires strong technical expertise, stakeholder management skills, and extensive experience working on complex mega construction projects.</p><br><br>Key Responsibilities<ul><li>Coordinate all Mechanical, Electrical and Plumbing (MEP) activities from design through construction and final handover.</li><li>Review MEP designs, drawings, technical specifications, and shop drawings to ensure compliance with project requirements.</li><li>Coordinate interfaces between consultants, contractors, suppliers, utility providers, and government authorities.</li><li>Monitor project progress, quality, safety, cost, and schedule performance for all MEP works.</li><li>Identify project risks, technical issues, and construction conflicts, implementing practical solutions to minimize delays.</li><li>Conduct regular site inspections to ensure installation works comply with approved drawings, specifications, and international standards.</li><li>Review contractor submissions, RFIs, material approvals, method statements, and inspection requests.</li><li>Support value engineering initiatives and recommend technical improvements where appropriate.</li><li>Manage post-contract matters including technical variations, claims, and coordination issues.</li><li>Ensure timely reporting of project progress, risks, and key milestones to project management.</li><li>Monitor contractor performance and ensure compliance with contractual obligations.</li><li>Support project commissioning, testing, handover, and close-out activities.</li><li>Ensure compliance with all Quality, Health, Safety and Environmental (QHSE) requirements.</li></ul>Requirements<ul><li>Bachelor's Degree in Mechanical Engineering (or closely related engineering discipline).</li><li>Minimum <strong>15 years</strong> of total experience within the construction industry.</li><li>At least <strong>5 years' experience as an MEP Coordinator</strong> on large-scale mega construction projects.</li><li>Previous experience working within a <strong>PMC or Engineering Consultancy</strong> environment is highly preferred.</li><li>Strong experience coordinating Mechanical, Electrical and Plumbing systems across multidisciplinary projects.</li><li>Proven knowledge of project planning, construction coordination, technical reviews, commissioning, and project delivery.</li><li>Experience coordinating with consultants, contractors, government authorities, and utility providers.</li><li>Excellent understanding of international engineering standards and local construction regulations.</li><li>Strong knowledge of project management principles, risk management, quality assurance, and contract administration.</li><li>PMP Certification is considered an advantage.</li></ul>Key Competencies<ul><li>MEP Design &amp; Construction Coordination</li><li>Project Management</li><li>Technical Review &amp; Design Coordination</li><li>Quality Assurance</li><li>Risk Management</li><li>Vendor &amp; Contractor Management</li><li>Stakeholder Management</li><li>Construction Planning</li><li>Problem Solving</li><li>Leadership &amp; Decision Making</li><li>Communication &amp; Negotiation</li><li>Report Writing</li></ul>Preferred Project Experience<p>Candidates with experience delivering one or more of the following project types will be highly regarded:</p><br><br><ul><li>Mixed-use developments</li><li>Commercial buildings</li><li>High-rise developments</li><li>Hospitality projects</li><li>Residential communities</li><li>Infrastructure developments</li><li>Smart city or sustainable development projects</li></ul> <br><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Workshop, Cranes and Tools Room is responsible for the safe, reliable, and cost-effective management of the site maintenance workshop, lifting equipment, cranes, rigging gear, welding facilities, machine shop activities, and tools room operations. The role ensures that all workshop services, lifting equipment inspections, repair activities, fabrication works, and tool management processes support maintenance and operational objectives while complying with company safety, quality, and statutory requirements.The position provides technical leadership for workshop personnel, crane and lifting equipment compliance, specialized maintenance support services, contractor coordination, resource planning, and continuous improvement initiatives to maximize equipment availability, operational efficiency, and asset integrity throughout the operation.</p> <p>Detailed Description </p> <p><b>WORKSHOP MANAGEMENT</b></p> <p>Lead and manage all workshop activities including mechanical repairs, fabrication, machining, welding, equipment refurbishment, and overhaul works.</p> <p>Ensure workshop resources, manpower, facilities, and equipment are effectively utilized to support maintenance requirements.</p> <p>Develop and implement workshop operating procedures, work standards, and best practices.</p> <p>Coordinate repair priorities with Maintenance Planning, Operations, and Reliability teams.</p> <p>Monitor workshop productivity, work quality, turnaround times, and resource utilization.</p> <p>Ensure workshop equipment is maintained, calibrated, and fit for purpose.</p> <p>Identify and implement continuous improvement opportunities to enhance workshop performance and efficiency.</p> <p>CRANES, LIFTING EQUIPMENT AND RIGGING MANAGEMENT</p> <p>Manage inspection, testing, certification, maintenance, and compliance of all cranes, hoists, lifting equipment, lifting accessories, and rigging gear.</p> <p>Ensure all lifting equipment complies with company standards, OEM requirements, and regulatory requirements.</p> <p>Coordinate third-party inspections, load testing, and certification activities.</p> <p>Maintain lifting equipment registers, inspection records, and certification documentation.</p> <p>Review and approve lifting plans and critical lift requirements as required.</p> <p>Investigate lifting equipment failures and implement corrective actions.</p> <p>Provide technical guidance and support for lifting operations across the site.</p> <p>TOOLS ROOM MANAGEMENT</p> <p>Manage the operation of the tools room and ensure availability of specialized maintenance tools and equipment.</p> <p>Establish and maintain tool inventory management systems.</p> <p>Ensure proper control, storage, calibration, inspection, and maintenance of tools and equipment.</p> <p>Monitor tool utilization and implement measures to minimize loss and damage.</p> <p>Coordinate procurement and replacement of tools and workshop consumables.</p> <p>Maintain accurate inventory records within SAP or approved systems.</p> <p>MAINTENANCE EXECUTION SUPPORT</p> <p>Provide workshop support for planned maintenance, breakdown maintenance, shutdowns, and major projects.</p> <p>Coordinate refurbishment and repair activities for mechanical components and assemblies.</p> <p>Support field maintenance teams with technical solutions and workshop services.</p> <p>Ensure maintenance work is completed safely, efficiently, and according to quality standards.</p> <p>Facilitate rapid turnaround of critical repairs to minimize operational downtime.</p> <p>SHUTDOWN AND PROJECT SUPPORT</p> <p>Support maintenance shutdowns and major projects through workshop services, fabrication activities, and lifting equipment readiness.</p> <p>Coordinate manpower, tools, lifting equipment, and contractor support during shutdowns.</p> <p>Ensure workshop and crane resources are available to meet shutdown schedules.</p> <p>Participate in shutdown planning, execution reviews, and lessons learned activities.</p> <p>CONTRACTOR AND SERVICE PROVIDER MANAGEMENT</p> <p>Manage workshop-related contractors and service providers.</p> <p>Monitor contractor performance, safety compliance, and quality of work.</p> <p>Review scopes of work, quotations, and technical proposals.</p> <p>Verify completed work and approve contractor service reports where applicable.</p> <p>Ensure contractor activities comply with company and site requirements.</p> <p>PERFORMANCE MONITORING AND REPORTING</p> <p>Develop and maintain KPIs for workshop, cranes, lifting equipment, and tools room performance.</p> <p>Monitor and report:</p> <p>Workshop Productivity</p> <p>Equipment Repair Turnaround Time</p> <p>Crane and Lifting Equipment Availability</p> <p>Inspection and Certification Compliance</p> <p>Tool Utilization and Inventory Accuracy</p> <p>Safety Performance</p> <p>Maintenance Cost Performance</p> <p><br></p> <p><b>Job Requirements </b></p> <p><b>Education:</b></p> <p> Bachelor s degree or Higher Diploma</p> <p><b>Experience:</b></p> <p> Bachelor s degree with 10+ years or Higher Diploma with 15+ years of experience in workshop operations, cranes maintenance in mining, minerals processing, or heavy industrial operations.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p>T</p> <p> Strong coordination and resource management skills, particularly during shutdowns and critical maintenance activities.</p> <p> Ability to make sound technical and operational decisions under pressure.</p> <p> Strong safety leadership and commitment to fostering a proactive safety culture.</p> <p> Excellent negotiation and contractor management skills.</p> <p> High level of accountability, integrity, and professional ethics.</p> <p> Strong attention to detail and commitment to quality and compliance standards.</p> <p> Effective conflict resolution and stakeholder influencing skills.</p> <p> Ability to manage multiple priorities and deliver results within deadlines.</p> <p> Strong collaboration skills with the ability to work effectively across all organizational levels.</p> <p> Adaptability and resilience in managing changing operational requirements and business priorities.</p> <p> Continuous improvement mindset with a focus on operational excellence, reliability, and cost optimization.</p> <p> Strong presentation, report-writing, and technical documentation skills.</p> <p> Ability to work effectively in a multicultural environment and build productive working relationships with internal and external stakeholders.</p> <p><br></p>

<p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office. Position is based in Musandam, Oman for a long-term assignment. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li><li>Certified Lead Auditor to any of the Management Systems ISO 9001 / ISO 14001 / OHSAS 18001.</li><li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li><li>Minimum Experience: Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry.</li><li>Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry.</li><li>Inspection and testing experience at manufacturing units and Construction sites required.</li><li>Multidiscipline Quality Control experience is preferred.</li><li>Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.</li><li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment.</li><li>Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li><li>Good Knowledge in the application of industry codes and standards</li></ul>

<p>Brief Posting Description </p> <p>The Senior Engineer Reliability &amp; Performance is responsible for developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p> <p>The position provides technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p> <p>Detailed Description </p> <p>RELIABILITY ENGINEERING &amp; STRATEGY MANAGEMENT</p> <p>Develop and continuously improve site reliability engineering programs and methodologies.</p> <p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p> <p>Lead asset reliability improvement initiatives to improve equipment availability and operational performance.</p> <p>Develop reliability standards, procedures, and best practices.</p> <p>Facilitate reliability reviews and equipment performance assessments.</p> <p>Support long-term asset management and lifecycle planning activities.</p> <p>Ensure reliability objectives align with business and operational requirements.</p> <p>ASSET PERFORMANCE MANAGEMENT</p> <p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p> <p>Develop asset performance indicators and equipment health indices.</p> <p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p> <p>Conduct performance benchmarking and improvement studies.</p> <p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p> <p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p> <p>Establish performance improvement roadmaps for critical assets.</p> <p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p> <p>Lead Reliability-Centered Maintenance studies for critical assets.</p> <p>Review and optimize maintenance strategies based on equipment criticality and risk.</p> <p>Develop maintenance task plans and reliability improvement recommendations.</p> <p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p> <p>Ensure maintenance strategies support reliability and business objectives.</p> <p>Participate in maintenance program reviews and audits.</p> <p>FAILURE ANALYSIS &amp; DEFECT ELIMINATION</p> <p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Analyze recurring failures and reliability issues.</p> <p>Identify bad actors and develop corrective action plans.</p> <p>Monitor implementation and effectiveness of reliability improvement actions.</p> <p>Promote defect elimination methodologies throughout maintenance and operations teams.</p> <p>Capture lessons learned and implement sustainable solutions.</p> <p>ASSET CRITICALITY &amp; RISK MANAGEMENT</p> <p>Lead asset criticality assessments across all plant and infrastructure assets.</p> <p>Develop and maintain asset criticality rankings and risk profiles.</p> <p>Support risk-based maintenance and reliability decision-making processes.</p> <p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p> <p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p> <p>Support business continuity and risk mitigation initiatives.</p> <p>MAINTENANCE OPTIMIZATION</p> <p>Analyze maintenance effectiveness and identify improvement opportunities.</p> <p>Optimize preventive maintenance frequencies and task content.</p> <p>Support development of predictive and condition-based maintenance programs.</p> <p>Evaluate work management performance and maintenance execution effectiveness.</p> <p>Improve maintenance productivity through data analytics and best practice implementation.</p> <p>Support spare parts optimization and critical equipment strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p> Minimum 5 years in senior reliability, asset management, maintenance excellence, or performance improvement role.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP).</p> <p> Certified Reliability Engineer (CRE).</p> <p> Asset Reliability Practitioner (ARP-E, ARP-L, or ARP-A).</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> IAM Certificate or Diploma in Asset Management.</p> <p> Reliability Centered Maintenance (RCM) Practitioner Certification</p> <p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p> <p> ISO 55001 Asset Management Lead Implementer or Lead Auditor.</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Project Management Professional (PMP).</p> <p> SAP PM Certification.</p> <p> Power BI Data Analytics Certification.</p> <p><br></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary responsibility</h4> <p>Lead a team(s) of materials corrosion engineers to carry out the materials activities to generate relevant deliverables on time, meeting QMS requirement according to client requirements.<br> Able to handle efficiently multiple projects. Ensure design integrity and deliverables quality for all areas within a project with special emphasis on interfaces.<br> Ability to develop CTR based on scope of work and provide input to finalize the project execution schedule.<br> Manage work assignments, workload, work forecasting for assigned projects.<br> Participate in HAZID, design reviews, HAZOPs, IPF classifications, HSE related workshops. Implement, practice, and monitor quality management system in assigned projects in line with ISO 9001.<br> Ensure seamless handover of deliverables to project teams.<br> Manage and control all interfaces of the related discipline with other disciplines and design product suppliers.<br> Liaise with vendors, contractors, and other client personnel to satisfy the various aspects of the project.<br> Preparation of requisitions and technical evaluation of subsequent bids for discipline material and equipment purchases and SACP and ICCP cathodic protection systems.<br> Ensure designs are executed in line with international, client, and company specifications, standards, and procedures.<br> Provide feedback on improvement to the applicable design standards.</p> <h4>Specific requirement</h4> <ul> <li>Demonstrated experience in materials selection (concept, FEED, detailed design).</li> <li>Demonstrated experience in corrosion analysis and implementing corrosion management programs.</li> <li>Demonstrated experience in validation of corrosion control, IOW, corrosion loops and damage mechanisms.</li> <li>Demonstrated experience in cathodic protection specification, design, and installation.</li> <li>Demonstrated experience in conducting risk based inspection.</li> <li>Demonstrated experience in painting and coatings specification.</li> <li>Experience in all ranges of metallic and non-metallic materials.</li> <li>Lead the material selection and corrosion control strategy for onshore oil and gas projects.</li> <li>Conduct technical reviews of project specifications, designs, and engineering deliverables to ensure alignment with project requirements.</li> <li>Identify, evaluate, and recommend materials suitable for various operating environments, considering factors like temperature, pressure, and corrosive media.</li> <li>Develop and implement corrosion protection systems, including coatings, cathodic protection, and chemical treatment solutions.</li> <li>Supervise and guide a multidisciplinary engineering team to meet project objectives and deadlines.</li> <li>Coordinate with project stakeholders to ensure compliance with regulatory requirements and industry best practices.</li> <li>Monitor project progress and ensure technical accuracy, cost control, and adherence to schedules.</li> <li>Perform detailed failure analysis, risk assessments, and life-cycle evaluations for materials and equipment.</li> <li>Prepare and deliver comprehensive technical reports, specifications, and presentations to internal and external stakeholders.</li> <li>Provide expertise in corrosion monitoring techniques and ensure implementation during project phases.</li> <li>Ensure all engineering activities comply with standards and quality assurance procedures.</li> <li>Support internal and external audits and address any findings related to materials and corrosion management.</li> <li>Train and mentor junior engineers to build technical capabilities within the team.</li> </ul> <h4>Education, qualification & experience</h4> <p>Degree in relevant engineering subject (B.Sc., B.Eng., M.Sc.); chemical, mechanical, materials.<br> Senior engineer / engineer shall have membership of an internationally accepted applicable professional body.<br> Minimum 15 years of experience in oil & gas.<br> Minimum 10 years of experience in engineering design (concept, FEED, detailed design & operations).<br> Experience in the Middle East is preferred.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br> And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br> And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Mechanical Technician Reports to: Mechanical Supervisor Department: Maintenance and Operations Department Location: Duqm/ Ras Markaz </p><p>JOB PURPOSE: Carry out preventive, corrective, and predictive maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, tanks, piping systems, HVAC units, and other static and rotating machinery, to ensure continuous and reliable operation of all facilities. </p><p>The position ensures that all maintenance and repair activities are performed in compliance with OTTCO s maintenance procedures, HSE policies, OEM recommendations, and international standards, supporting operational reliability and mechanical integrity of terminal assets. </p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0 </p><p>KEY RESPONSIBILITIES: </p><p>Operations &amp; Maintenance </p><p>Perform preventive and corrective maintenance on mechanical systems including pumps, compressors, gearboxes, valves, piping networks, and pressure vessels. </p><p>Dismantle, inspect, and assemble rotating equipment during scheduled and unscheduled maintenance. </p><p>Conduct alignment, balancing, lubrication, and vibration monitoring as per preventive maintenance plans. </p><p>Assist in troubleshooting equipment failures and identify root causes in coordination with the Mechanical Supervisor. </p><p>Carry out routine inspections to detect leaks, abnormal noise, vibration, or wear in mechanical components. </p><p>Support maintenance and inspection of static equipment such as tanks, exchangers, and pipelines. </p><p>Perform mechanical isolations, tagging, and reinstallation in accordance with PTW and safety procedures. </p><p>Update maintenance job cards, inspection findings, and work completion details in the CMMS (SAP/Maximo) system. </p><p>Participate in start-up, shutdown, and major overhaul activities as per approved maintenance plans. </p><p>Project &amp; Technical Support </p><p>Assist in installation, commissioning, and modification of mechanical equipment for ongoing projects or upgrades. </p><p>Participate in inspection and quality verification of mechanical works carried out by contractors. </p><p>Ensure installations comply with design drawings, mechanical standards, and project specifications (API, ASME, ASTM, ISO). </p><p>Provide site feedback on equipment condition and improvement opportunities to enhance reliability and maintainability. </p><p>Safety &amp; Compliance </p><p>Follow OTTCO s HSE, Permit-to-Work (PTW), and mechanical isolation procedures at all times. </p><p>Conduct toolbox talks and ensure proper use of PPE, tools, and lifting equipment. </p><p>Identify and report unsafe acts, conditions, or potential hazards promptly. </p><p>Maintain mechanical workshops, pump stations, and maintenance areas in a clean and safe condition. </p><p>Ensure safe execution of lifting, rigging, and confined space activities as per approved procedures. </p><p>Participate in emergency drills and support plant safety initiatives. </p><p>Teamwork &amp; Coordination </p><p>Coordinate with Electrical, Instrument, and Operations teams to perform multidisciplinary maintenance activities. </p><p>Support supervisors during shutdowns, major overhauls, and turnaround campaigns. </p><p>Assist in mentoring and training junior technicians and contractors to maintain work quality and efficiency. </p><p>Participate in team meetings, planning sessions, and maintenance improvement workshops. </p><p>Documentation &amp; Reporting </p><p>Record daily work activities, inspection data, and equipment readings in job sheets or CMMS. </p><p>Maintain equipment history cards, lubrication charts, and spares consumption logs. </p><p>Report defects, performance issues, and material shortages to supervisors for timely action. </p><p>Support preparation of maintenance reports, failure analysis records, and spare parts lists. </p><p>Continuous Improvement </p><p>Recommend improvements to maintenance practices, procedures, and job plans. </p><p>Participate in root cause analysis (RCA) for repeated mechanical failures. </p><p>Support reliability and efficiency enhancement programs under the ETIZAAN initiative. </p><p>Identify cost-saving opportunities related to spare parts, lubrication, or resource utilization. </p><p>Perform any other duties or special assignments as directed by line management. </p><p>Familiarization with QHSE Policies, Objectives, procedures and its record maintenance </p><p>Awareness on Significant environmental aspects, Health and safety hazards, related actual and potential aspects and risks associated with their risk. </p><p>Awareness on Emergency preparedness and response measures. </p><p>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations </p><p>Key interactions </p><p>Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire </p><p>External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or National Vocational Qualification (NVQ) in Mechanical Engineering / Industrial Maintenance. </p><p>Professional Certifications </p><p>Authorized certification in Mechanical Maintenance / Rotating Equipment Maintenance. </p><p>HSE and PTW system certifications such as NEBOSH/IOSH preferred. </p><p>Training in Vibration Analysis, Alignment, and Rigging/Lifting Safety is advantageous. </p><p>CMMS (SAP) training and basic computer literacy preferred. </p><p>Experience </p><p>+5 years of hands-on experience in mechanical maintenance within oil &amp; gas terminals, refineries, or heavy industrial facilities. </p><p>Experience in servicing and maintaining centrifugal and positive displacement pumps, compressors, valves, and gearboxes. </p><p>Familiar with mechanical sealing systems, gaskets, and bolting procedures. </p><p>Experience in piping maintenance, leak repair, and hydrotesting. </p><p>Working knowledge of tanks, pressure vessels, exchangers, and HVAC systems. </p><p>Familiar with international standards such as API 610, 650, 682, ASME, and ASTM. </p><p>Technical Competencies </p><p>Skilled in dismantling, assembling, and aligning rotating machinery. </p><p>Proficiency in using precision tools (dial gauges, micrometers, torque wrenches, etc.). </p><p>Ability to interpret mechanical drawings, P&amp;IDs, and maintenance manuals. </p><p>Knowledge of lubrication practices, material compatibility, and corrosion prevention. </p><p>Capable of performing mechanical troubleshooting and identifying failure modes. </p><p>Familiar with safe rigging, lifting, and confined space work practices. </p><p>Behavioral Competencies </p><p>Safety-oriented with strong discipline and attention to detail. </p><p>Good communication and teamwork abilities across multi-discipline teams. </p><p>Capable of working under supervision and delivering high-quality workmanship. </p><p>Proactive, reliable, and committed to continuous improvement. </p><p>Upholds OTTCO s values of Safety, Integrity, Reliability, and Operational Excellence. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land and sea. The Incumbent must comply with all applicable International and Federal Transportation Laws, Regulations, Tariffs and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p><p>Principal Accountabilities</p><ul><li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li><li>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</li><li>Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</li><li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and Maintains Manifest logs.</li><li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</li><li>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</li><li>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</li><li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</li><li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li><li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li><li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li><li>Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.</li><li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority or other special requirements.</li><li>Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li><li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting and maintaining operation stock levels of 463L pallets, nets and other tie-down equipment located on-site.</li><li>Assists the WPM Custodian with inspecting and certification, record keeping and reporting the receipt and usage requirements.</li><li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li><li>Reports all lost, damaged, destroyed and modified containers to the CCO within 12 hours of discovery.</li><li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li><li>Receives/Ships all containers in JCM within 12 hours of receipt or departure.</li><li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li><li>Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.</li><li>Inspects cargo documentation, conducts Joint Inspections and certifies that cargo is built correctly and airworthy.</li><li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo and baggage.</li><li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p><p>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</p><p>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</p><p>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</p><p>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</p><p>Knowledge and understanding of MHE equipment operations and associated hazards required.</p><p>Will be required to receive training and operate material handling equipment.</p><p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p><p>High School diploma or equivalent required.</p><p>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</p><p>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems or other related experience.</p><p>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</p><p>Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</p><p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p><p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p><p>Ability to travel domestically and internationally.</p><p>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint preferred.</p><p>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</p><p></p></section>