وظائف مهندس تفتيش هندسي في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall be HNC or HND or graduate in Electrical Engineering or equivalent. Fluent spoken and written English and PC literate. Shall have Knowledge in Ex requirements. Shall be thoroughly familiar with electrical design packages, construction activities, materials of construction, construction methods and international standards for electrical design. Shall demonstrate hands on experience in testing of electrical equipment installation, pre-commissioning and commissioning, SAT/ Pre-commissioning of Switchgears, Transformers, Motors, Generators, cable laying, jointing and termination activities Shall be thoroughly familiar with Overhead line (OHL) activities shall fulfil requirements listed above and additional requirements as below Shall be skilled with the good construction practice in OHL material and construction, familiar/ Expertise with Material Inspection of OHL materials and Accessories, related Inspection and testing, Cable jointing, Termination, Hi potential Electrical Test, Root cause analysis. Implement QA/QC activities including those of sub-suppliers works in accordance with approved ITPs and procedures, method statements and other Contract documents. Prepare and sign-off applicable records for quality surveillance/ inspections/ tests. Maintain records of calibration, inspection and testing equipment. Ensure availability of appropriate version of applicable work documents. Witness qualification procedures, tests and certify the results Provide feed-back to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day-to-day quality issues.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Shall be HNC or HND or graduate in Electrical Engineering or equivalent. Fluent spoken and written English and PC literate. Shall have Knowledge in Ex requirements. Shall be thoroughly familiar with electrical design packages, construction activities, materials of construction, construction methods and international standards for electrical design. Shall demonstrate hands on experience in testing of electrical equipment installation, pre-commissioning and commissioning, SAT/ Pre-commissioning of Switchgears, Transformers, Motors, Generators, cable laying, jointing and termination activities Shall be thoroughly familiar with Overhead line (OHL) activities shall fulfil requirements listed above and additional requirements as below Shall be skilled with the good construction practice in OHL material and construction, familiar/ Expertise with Material Inspection of OHL materials and Accessories, related Inspection and testing, Cable jointing, Termination, Hi potential Electrical Test, Root cause analysis.</p><p></p></section>

<p>Responsible for inspecting construction activities and ensuring compliance with project specifications, drawings, and quality standards. The role includes preparing inspection reports, reviewing materials, monitoring workmanship, and coordinating with client representatives for approvals&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>NA</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>CONSTRUCTION QC INSPECTOR - WELDING &amp; NDT</strong> <em>Reporting line to:</em><ul><li>Site Quality Control Manager</li></ul><em>Required experience/ qualification:</em><ul><li>Be in possession of international current certifications for the role in compliance with IIW; PCN or CSWIP.</li><li>Be in possession of current qualification of II level NDT in compliance with ISO 9712</li><li>Be fully conversant with EN standard and AMSE (B31.3) code requirements and have a solid and demonstrated background on welding engineering (e.g. multiple days courses by internationally recognized institutes)</li><li>Previous experience in application of EN1090 (structural steel) and Pressure Equipment Directive PED (for piping) would be preferable.</li></ul><em>Field safety responsibilities:</em><ul><li>Implement HSE procedures and standards in compliance with applicable laws, Health and Safety Documentation and Environmental Management Manual.&nbsp;</li><li>Be diligent and draw attention to unsafe acts, unsafe behaviours and unsafe conditions.&nbsp;</li></ul><em>Main tasks and responsibilities&nbsp;</em><ul><li>Review and comment subcontractor welding/NDT procedure &amp; qualifications (i.e. welders lists, NDT operator lists, welding consumables management procedure, piping/structural steel certificates, material traceability procedure, Welding Summary List and Welding traceability Reports, etc)</li><li>Perform witness, inspection &amp; surveillance checks and assess continually Welding/ NDT subcontractor’s performance</li><li>Ensure that all inspection activities are recorded in the appropriate records.</li><li>Ensuring quality of the work for compliance with CQCP, approved ITP’s/ procedures and standards within assigned areas</li><li>Monitor Subcontractors QC resource levels to achieve quality standards according to agreed ratio</li><li>Issue status and trend reports as necessary and requested by Site Management providing suggestions on how to improve quality of welding/ NDT activities&nbsp;</li><li>Record deficiencies and/or incomplete works on punch items and liaise with company supervisor/ superintendent to expedite necessary rectification</li><li>Identify and document Subcontractor and Supplier quality deficiencies and initiate non-conformance process as required.</li><li>Verify that materials used are in accordance with project technical documents and applicable codes and specifications.</li><li>Support QC/ turnover team for collecting relevant QC records</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<ul><li><p>Ensure compliance with the Company's HSE Policy and associated procedures.</p></li><li><p>Attend witness and hold points as specified in the approved Inspection and Test Plan (ITP).</p></li><li><p>Inspect and approve painting, coating, insulation, and fireproofing materials and related reports.</p></li><li><p>Review test packs and witness the required testing activities.</p></li><li><p>Attend daily progress meetings with the EPC Contractor and address quality-related issues.</p></li><li><p>Certify red mark-up drawings and final as-built drawings.</p></li><li><p>Provide daily feedback to the QA/QC Lead regarding quality issues.</p></li><li><p>Provide technical assistance for GRE, GRP, HDPE, and LLRTP projects.</p></li><li><p>Manage coating, insulation, fireproofing, and painting activities at both site and shop locations.</p></li><li><p>Implement QA/QC activities at the worksite, including subcontractor activities.</p></li><li><p>Review coating, painting, and testing deliverables.</p></li><li><p>Act as the focal point for quality control of GRE, GRP, HDPE, and LLRTP procurement, construction, installation, and testing activities.</p></li><li><p>Participate in kick-off and pre-inspection meetings, witness material testing, and bonder qualification activities.</p></li><li><p>Lead incident investigations related to GRE and HDPE systems.</p></li><li><p>Support the QA/QC Engineer in reviewing quality variances.</p></li></ul><br><p><strong>Duration: 6 Months, Extendable</strong></p><p><strong>Rotation Cycle: 6 weeks working & 2 weeks off</strong></p><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Bachelor's Degree or Diploma in Mechanical, Chemical, Metallurgical Engineering, or an equivalent discipline.</p></li><li><p>BGAS Grade 2 or NACE Level 2 (minimum) Certification in Painting Inspection.</p></li><li><p>Minimum of 8 years of experience as an Off-Plot/On-Plot Coating, Painting, Insulation, and Fireproofing Inspector, responsible for coating and painting inspection activities on medium to major Oil & Gas EPC projects.</p></li><li><p>Thorough knowledge of international standards related to painting, coating, insulation, fireproofing, associated materials, and testing requirements.</p></li><li><p>Proficient in computer applications, including email, word processing, and spreadsheet software for general business use.</p></li><li><p>Strong written and verbal communication skills, with the ability to communicate effectively with individuals and groups.</p></li><li><p>Minimum of 2 years of experience working as a GRE/GRP Supervisor.</p></li><li><p>Preferably completed a Company-approved vendor-specific training program in non-metallic construction, installation, commissioning, and QA/QC for GRE, HDPE, GRP, and LLRTP piping systems.</p></li><li><p>Thorough knowledge of international standards related to non-metallic piping and pipeline manufacturing and construction activities.</p></li></ul>

<p>PDO approved GRE inspector - (High Pressure - Non Metallic) </p><br><ol><li><p>Maintain records of calibration, inspection and testing equipment.</p></li><li><p>Ensure availability of appropriate version of applicable work documents.</p></li><li><p>Witness qualification procedures, tests and certify the results.</p></li><li><p>Provide feed-back to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day to-day quality issues.</p></li></ol><br><br><br><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: Shall be HNC or HND with minimum of 4 years of inspection experience in construction industries out of which 2 years shall be in the construction of oil and gas facilities on relevant Non-metallic pipeline / piping construction. </p><p>2 years of experience working with Non-metallic manufacturer may be considered to give equivalent competence. </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 11,000 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>The role will be responsible for reviewing, coordinating, monitoring, and supervising all MEP and power-related engineering activities across the project lifecycle, ensuring compliance with contract requirements, railway standards, safety regulations, quality expectations, and project schedules</span></p><br><br> Missions/Main Duties <br><ul><li>Review and monitor the design, installation, and commissioning of&nbsp;<em><span>MEP and power systems</span></em>for railway stations, depots, operation control buildings, maintenance facilities, and associated infrastructure.</li><li>Ensure contractor works comply with approved drawings, specifications, contract requirements, safety rules, and relevant railway and building standards.</li><li>Review and provide technical comments on design documents, shop drawings, material submittals, method statements, inspection requests, and testing and commissioning procedures.</li><li>Supervise and monitor site execution of electrical, mechanical, plumbing, drainage, HVAC, fire protection, lighting, earthing, and power distribution works.</li><li>Coordinate interfaces between MEP systems and other railway systems, including civil works, architectural finishes, trackwork’s, signaling, telecommunications, and operational systems.</li><li>Verify electrical load calculations, equipment sizing, cable routing, grounding systems, backup power arrangements, and power distribution layouts.</li><li>Support review of substation, switchgear, transformers, LV panels, emergency power, UPS, and related power infrastructure interfacing with station and building systems.</li><li>Monitor construction quality and ensure installations meet approved quality plans, inspection test plans, and project standards.</li><li>Participate in inspections, testing, commissioning, snagging, defect tracking, and final handover processes</li><li>Identify technical risks, construction issues, and interface conflicts, and recommend practical corrective actions.</li><li>Prepare progress reports, technical observations, non-conformance comments, and engineering review notes for PMC and client management.</li><li>Coordinate with the client, contractors, designers, authorities, operators, and other stakeholders to support timely decision-making and issue resolution.</li><li>Ensure compliance with&nbsp;health, safety, environmental,&nbsp;and&nbsp;railway operational safety&nbsp;requirements throughout project delivery.</li><li>Support value engineering, constructability reviews, and optimization initiatives where appropriate.</li></ul> Profile/Skills <br><ul><li><span>Bachelor’s degree in&nbsp;Electrical Engineering,&nbsp;Mechanical Engineering, or a related engineering discipline. Master’s degree is an advantage</span></li><li>Minimum 10 years <span>of relevant experience in railway project</span></li><li><span>Strong knowledge of building services and electrical power systems in infrastructure projects</span></li><li><span>Familiarity with railway station and depot MEP requirements</span></li><li><span>Understanding of relevant international and local codes, standards, and railway specifications</span></li><li><span>Ability to review technical submittals, drawings, calculations, and commissioning documents</span></li><li><span>Strong site supervision and construction monitoring capability</span></li><li><span>Good coordination skills across multidisciplinary teams and interfaces</span></li><li><span>Excellent written and verbal communication skills</span></li><li><span>Ability to identify risks, resolve technical issues, and support timely project delivery</span></li><li><span>Strong awareness of safety, quality, and compliance requirements</span></li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

<ul><li><p>Lead daily site supervision activities and coordinate the Owner’s Engineer site team across civil, electrical, renewable energy, quality, planning, HSE interface, and document control functions.</p></li><li><p>Monitor construction works against approved drawings, specifications, inspection plans, method statements, and applicable standards.</p></li><li><p>Coordinate site interfaces between contractors, discipline engineers, project stakeholders, and relevant authorities or third parties.</p></li><li><p>Review progress, identify risks, bess</p></li><li><p>delays, interface constraints, and quality concerns, and support timely corrective actions.</p></li><li><p>Ensure site observations, technical issues, quality concerns, and progress updates are accurately captured and reported.</p></li><li><p>Support permit, regulatory, stakeholder, and interface coordination activities as required.</p></li><li><p>Act as the senior site representative for the Owner’s Engineer team and deputise for project leadership when required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Engineering or a related technical discipline.</p></li><li><p>Minimum 15 years of experience in construction management, site supervision, or project delivery within power generation, renewable energy, infrastructure, or large EPC environments.</p></li><li><p>Prior site-based experience on utility-scale wind, solar PV, BESS, grid, substation, or similar energy infrastructure projects is preferred.</p></li><li><p>Strong understanding of construction sequencing, multidisciplinary site coordination, progress monitoring, quality surveillance, and interface management.</p></li><li><p>Excellent leadership, stakeholder management, communication, reporting, and problem-solving skills.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To carry out all electrical &amp; mechanical maintenance management for switchgears, LV (Low Voltage) and HV (High Voltage) motors, generators (Electric Overhead Travel)/ Jib/Tower cranes and other heavy equipment s and machinery equipment s in order to ensure that all equipment s in the shipyard electrical network system are running efficiently and the work is of high quality.</p><p>KEY ACCOUNTABILITIES:</p><p>Description Maintenance Major activities</p><ul><li>Carry out periodical follow up of general inspections for all crane spots as well as machinery equipment s in all critical locations and provide non-compliance and action reports to take timely actions and keep the Senior Manager aware of all the challenges, issues and progress of activities</li><li>Support Crane Technicians &amp; foreman to carry out repair maintenance and fault findings and guide them to facilitate learning and development of the team</li><li>To Planning &amp; Executing general/routine/preventive/breakdown maintenance and repairs for crane equipment s</li><li>To prepare KPI for maintenance section</li><li>To Carry out &amp; diagnose the problems in PLC and VFD systems for all the cranes</li><li>Doing the programming of PLC systems (Siemens, ABB, Allen Bradley etc.) whenever required</li><li>Maintain the checklists and records for routine, preventive, breakdown maintenance of all crane equipment s</li><li>To monitor the daily crane maintenance activities</li><li>To plan &amp; Executing of the third part inspection &amp; load test of the crane and heavy equipment s</li><li>To plan &amp; Executing of the lifting tools inspection &amp; load test</li><li>To prepare POR for cranes spare parts and follow-up with C&amp; P</li><li>To follow up the stock inventory</li><li>All the maintenance section POR is updating and follow-up with C&amp; P</li><li>To assist maintenance section budget preparation and cost control study</li><li>To follow up the TPM activities</li><li>To follow-up &amp; assist to rectify the Electrical and electronics, PLC, drives problems in all the cranes (jib cranes, Shop cranes), Heavy lifting equipment s (cherry pickers, forklifts, Crawler cranes, mobile cranes &amp; generators, etc.)</li><li>To follow-up &amp; assist to rectify the electrical &amp; PLC, drives problems in machinery equipment s (CNC Machines, CNC cutting machines, bending machine, CNC pipe coaster, CNC milling machines &amp; etc.)</li><li>To follow up &amp; assist to rectify the electrical &amp; PLC, drives problems in Environment s Plants</li><li>Tender documents preparation for new equipment s</li><li>To prepare documents for ISO and OHSAS and internal Audit</li></ul><p>Technical Inputs</p><ul><li>Inspect the electrical repair items on a regular basis, take measurements, make sketches and generally monitor the progress of the activities and assist the team by providing technical inputs on the processes and methods to ensure the interpretation and execution work is simplified for everyone involved</li></ul><p>Evaluations</p><ul><li>Evaluate work specifications; prepare information, person-hours, materials, direct purchases in coordination with the Production and Budget Control teams to ensure the repair work proceeds as per timelines and cost schedules</li></ul><p>Test and Trials</p><ul><li>Carry our test and trials of repaired electrical items to ensure the repairs conducted is proper and the items are functional</li></ul><p>Material Requirements and Use</p><ul><li>Coordinate with internal departments as well as material suppliers/vendors when required by the Production Sections to ensure that material requirements are provided timely and accurately to complete job requirements</li></ul><p>Preparing Reports</p><ul><li>Prepare technical reports and record operational data on critical inspection and monitoring on machines and equipment used, type and quality of materials, etc. to ensure accurate and up to date information is input into the logbook</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner</li></ul><p>Quality, Health, Safety, &amp; Environment</p><ul><li>Adhere to all relevant quality, health, safety and environmental procedures, instructions and controls to guarantee the safety of employees, quality of products/ services and environmental compliance can be guaranteed</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><b>Minimum Qualifications:</b> Bachelor's degree in electrical / mechanical engineering or equivalent</li><li><b>Minimum Experience:</b> 10 years of relevant experience in Jib cranes and switchgears, heavy lifting equipment, generators, CNC Machines and PLC, drives and other workshop facilities in shipyard or heavy industries</li><li><b>Skills</b><ul><li>Understanding of all electrical drawings, process and sequence drawing</li><li>Skills to replace/repair/overhaul major electrical equipment s such as Switchgears, Generators, Motors, Different Cranes, Machine tools, and control circuitry</li><li>Ability to interpret mechanical/electrical and electronic diagrams</li><li>Exposure to ISO 9001:2015 standards</li><li>Communication and interpersonal skills</li><li>Analytical thinking skills</li><li>Technical drawing skills</li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Do you enjoy leading a team that provides a high-quality service for our customers? Do you love collaborating with teams to solve complex problems? Join our Team Baker Hughes is the first and only comprehensive provider of digital oilfield products, services and solutions. Drawing inspiration from its rich heritage as an inventor company, Baker Hughes harnesses the passion and expertise of its people to improve productivity throughout the entire oil and gas value chain. Partner with the best As the Service Coordinator, you will ensure flawless execution, on-time delivery and contract adherence. You will ensure that Baker Hughes maximizes its short and long term revenue and profit opportunities. You will coordinate job activities to ensure execution in line with customer expectations and contract terms and conditions. As a Service Delivery Coordinator, you will be responsible for: Protecting the health and safety of our personnel and the environment. Conducting all activities in line with our non-negotiables, applicable processes and cultural pillars. Ensuring the assigned contracts/quotes are fully understood and capitalized upon, Coordinate and monitor all job activities as outlined in MTJC across organizational boundaries. Acting as primary contact for client for job preparation, execution and close out. Being responsible for scheduling and dispatching of resources in line with job requirements Being familiar with the assigned client s process for MOC / escalation to ensure the proper process is followed when there is risk of not achieving the clients objectives (examples clients asking for BH to operate outside of product specifications, client asking BH to execute work in way that is not aligned with the BH SOP). Prompting escalation of issues that can impact service delivery, Ensure invoice is in line with contract/quote, with no revenue leakage and timely collection of cash. Comply with Job center and S&amp;OP Platforms Fuel your passion To be successful in this role you will: Have a Bachelor's degree in Engineering 10 years of experience in drilling services Have previous experience as an applications engineer for 4+ years Have technical knowledge and engineering understanding towards Drilling Services Be able to work in a team Be able to demonstrate leadership skills Demonstrate Intermediate / Advanced English Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: Office Worker Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect: Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options Safety net of life insurance and disability programs Tailored financial programs Additional elected or voluntary benefits</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Have a Bachelor's degree in Engineering</li><li>10 years of experience in drilling services</li><li>Have previous experience as an applications engineer for 4+ years</li><li>Have technical knowledge and engineering understanding towards Drilling Services</li><li>Be able to work in a team</li><li>Be able to demonstrate leadership skills</li><li>Demonstrate Intermediate / Advanced English</li></ul><p></p></section>

<p>We have openings for our prestigious client in Oman; they have openings for Fleet Supervisor &amp; QA QC Lead (Mechanical) Experience in Oil &amp; Gas Oman Location PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of Birth:- Age:- Below is the open positions: - A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor. B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills. Please inform your friends &amp; colleagues for the same. Warm Regards, Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services Branches: - Surat (HO) | Navi Mumbai | Oman | UAE Mobile: - PHONE_NUMBER Email id: - EMAIL_ADDRESS Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST.</p><p>A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor.</p><p>B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills.</p>

<p><br></p><p>Welding Engineer - Job Description</p><p>Job Title: Welding Engineer</p><p>Job Summary: A Welding Engineer is responsible for planning, developing, supervising, and improving welding processes to ensure the quality, safety, and efficiency of fabrication and construction activities. They ensure compliance with industry standards, project specifications, and quality requirements in manufacturing, oil &amp; gas, construction, power, and infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:</li><ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul><li>Knowledge of international codes and standards:</li><ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></ul><p>Required Skills</p><ul><li>Strong knowledge of welding processes:</li><ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li></ul><p>Experience Requirements</p><ul><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Welding rejection/repair rate.</li><li>Productivity and welding efficiency.</li><li>Compliance with project quality requirements.</li><li>Number of qualified welders and procedures.</li><li>Safety performance and incident reduction.</li><li>On-time completion of welding activities.</li></ul><p>Reporting Structure</p><p>Reports To: QA/QC Manager, Fabrication Manager, Construction Manager, or Project Manager</p><p>Supervises: Welding Supervisors, Welders, Welding Technicians, and Welding Inspectors (as applicable).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:<ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul></li><li>Knowledge of international codes and standards:<ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></li><li>Strong knowledge of welding processes:<ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul></li><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>

<ul><li><p>Implement QA/QC activities including those of sub suppliers works in accordance with approved ITPs and procedures, method statements and other control Documents;</p></li><li><p>Prepare and sign off applicable records for quality surveillance/inspections/tests;</p></li><li><p>Carry out surveillance inspections to verify processes and procedures compliance. The surveillance role shall be as follows but not limited to:</p></li></ul><p>o To monitor all activities with respect to quality performance.</p><p>o Raising RFI to client for day-to-day construction activities</p><p>o Witness Pigging/ hydro test/Pneumatic test activities.</p><p>o Line walks and punch list preparation / closeouts.</p><p>o PQR/WQT conduct as per PWPS & WPS</p><p>o To ensure that the materials are from the approved Suppliers.</p><p>o To ensure close out of NCR’s with suitable correction and corrective actions.</p><ul><li><p>Maintain records of calibration, inspection and testing equipment.</p></li><li><p>Ensure availability of appropriate version of applicable documents;</p></li><li><p>Witness qualification procedures, tests and certify the results.</p></li><li><p>Issue Inspection Release Note of Product/ Sign test pack (QC dossier), as applicable.</p></li><li><p>Provide feedback to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day to day quality issues.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>HNC or HND or graduate or equivalent in Mechanical Engineering, welding Engineering or Metallurgy or appropriate craft training</p><p>CSWIP 3.1 / AWS or equivalent and certified to ASNT / EN 473 / PCN level II in RT, PT, MT and UT techniques.</p><p>Minimum 6 years (HNC/HND) experience in inspection in Pipeline, piping, tanks, pressure equipment, valves, piping, rotating equipment, and refinery construction works as applicable. Familiar with mechanical and metallurgical testing requirements</p><ul><li><p>Strong oral and written communication skills in English</p></li><li><p>Good knowledge and skills in quality audit</p></li><li><p>Good knowledge of MS Office</p></li></ul>

<p>A hands-on professional responsible for directly supervising and controlling all lifting and rigging operations on site to ensure safe and efficient execution.</p><p><b>Responsibilities</b></p><ul><li>Supervise all lifting operations on site in accordance with approved lifting plans.</li><li>Conduct pre-lift checks on cranes, rigging equipment, and accessories.</li><li>Ensure all lifting gear is inspected, certified, and fit for use.</li><li>Brief crane operators, riggers, and banksmen before each lift.</li><li>Control exclusion zones and ensure unauthorized personnel are kept clear.</li><li>Communicate with crane operators using standard hand signals or radio.</li><li>Monitor ground conditions, weather, and environmental factors during lifts.</li><li>Stop lifting operations immediately if unsafe conditions are observed.</li><li>Ensure correct rigging configurations and load attachment methods are used.</li><li>Maintain daily lifting logs and inspection checklists.</li><li>Report incidents, near-misses, and equipment defects to the Lifting Engineer and HSE team.</li><li>Coordinate with other site supervisors to plan and sequence lifts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Age limit 24-50</p><p>Need Gulf Experience</p>

<p>Responsible for monitoring the quality of incoming and outgoing materials, products, services for the assigned project, as well as the associated construction/production/manufacturing/installation etc process. Also responsible for conducting tests, analyzing measurements, and reporting thereof. Overall, a Quality Control Inspector, is responsible for making sure that the material/product/service meets the expected standards before being sent to the customer so as to arrest/reduce the chances of failure/non conformity.<br></p><ol><li><p>Responsible for all day to day activities and execution of all Quality Control plans for the assigned project in line with organizational and project/location specific QMS/CQP/PQP, international standards (ISO etc), client and statutory requirements</p></li><li><p>Responsible to perform various functional quality assessments & inspections on input samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to assess & inspect output samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to initiate corrective actions on non-conformities and monitor & track them to completion</p></li><li><p>Responsible to define functional inspection and test processes and document inspection outcomes by completing detailed inspection reports and performance records. Responsible to measure, track and monitor improvements to the construction/production/manufacturing/installation etc process to ensure quality control</p></li><li><p>Responsible for all individual and specific departmental productivity targets, financial objectives, KPIs and attainment thereof.<br></p></li></ol><p><strong>Other tasks:</strong></p><ol><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management</p><p><br><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>Responsible for execution of Quality inspections as per SP 1171, Contract quality control plans and inspection test packs. He/she shall report to the relevant area Quality Engineer.<br></p><p><strong>Educational Qualifications</strong></p><br><ul><li><p>Bachelor’s degree in Mechanical Engineering</p><br></li><li><p><strong><u>GRP, GRE, GRV, HDPE, LLRTP, PVDF, PPFRP, PEFRP, PVCFRP, CPVC, UPVC (nonmetallic)</u></strong><br></p></li></ul><p><strong>Professional Certifications</strong></p><ul><li><p>A proven work experience as a <strong><em><u>GRE QCI ( Specially High Presser lines)</u></em></strong></p></li></ul><ul><li><p>Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent</p></li><li><p>ASNT Level 2 or equivalent in UT, RT, PT, MT.</p></li><li><p>Certification in Quality Management Systems, Six Sigma, ISO, Total Quality Management or equivalent (preferred)</p></li><li><br></li></ul><p><strong>Skills</strong></p><ul><li><p>A proven work experience as a Welding QCI / GRE - GRV, HDPE, LLRTP, PVDF, PPFRP, PEFRP, PVCFRP, CPVC, UPVC (nonmetallic)</p></li><li><p>Familiarity with latest quality-oriented trends in the industry. Knowledge of best practices</p></li><li><p>Strong writing and record keeping abilities. Strong IT skills. Strong communication, planning, organizing and leadership skills.</p></li></ul><p><br></p><p><u>Key details of the position:</u></p><ul><li><p>Site-based job&nbsp;<strong>without family status</strong></p></li><li><p><strong>Food, accommodation and transportation</strong>&nbsp;will be provided by the company</p></li><li><p>Mandatory -&nbsp;<strong><em><u>Oil & Gas Experience</u></em></strong></p></li><li><p><strong>Leave cycle:</strong>&nbsp;6 months followed by 14 days of paid leave&nbsp;( Client approved Candidates/position only)</p></li></ul><p><br><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p><p><span >As a </span><b >Field Engineer</b><span >, you will be involved in every part of our business. From acquiring essential data to planning long-term well development, you will organize, run, and report operations in the field environment and assist Specialists and other Engineers with key decisions. Your training will be hands-on as you learn about the energy industry and become an expert in the various tools and services in your business line. With the help of management and a comprehensive development program, you will be given responsibility and support to make your impact and start becoming a leader in our business.</span></p> <p> </p> <p>Our <b>Field Specialists</b> focus on the vital technical and operational procedures that ensure our sites are safe and our customers get exceptional service. You will receive intensive instruction in troubleshooting, safety, and client interaction to develop a deep technical understanding of what we do. Through a combination of hands-on learning and formal training, you will become the company s representative on-site, with supervisory responsibility, working through a range of complex, practical challenges and developing innovative strategies to solve them. </p> <p> </p> <p>As a <b>Field Technical Analyst</b>, you will provide technical expertise to teams across the site and use your knowledge to help them deliver exceptional service. Using a variety of tools and techniques, you will apply your theoretical understanding to the practical challenges we face on-site every day. This includes creating formation evaluation logs and helping to analyze and interpret cuttings to determine rock type and hydrocarbon presence. You will also help monitor the well parameters and maintain sensors to understand well conditions. An extensive development program will expand your technical knowledge and hands-on skillset. </p> <p> </p> <p> <b>Responsibilities </b> </p> <p> </p> <ul> <li> <p>Perform operations, operate equipment, and be accountable for team wellsite performance by the end of your training </p> </li> <li> <p>Manage field operations, including engineering design, maintenance, job planning, and operational reporting </p> </li> <li> <p>Learn the well construction process and understand the role of different service companies </p> </li> <li> <p>Support engineers and specialists on-site and help with essential duties, such as risk analysis </p> </li> </ul> <ul> <li> <p>Effectively manage a crew and/or processes within a year </p> </li> <li> <p>Help prepare wellsite reports and post-job debriefings </p> </li> <li> <p>Actively contribute to continuous improvement culture across the business </p> </li> </ul> <p> </p> <p> <b>Qualifications and Experience</b> </p> <ul> <li> <p>Meet minimum degree/experience requirements </p> </li> <li> <p>Good verbal and written communication skills </p> </li> <li> <p>Fluency in written and spoken English </p> </li> <li> <p>Quick learner able to use logic to solve problems </p> </li> <li> <p>Be personally committed to continuous improvement </p> </li> </ul> <ul> <li> <p>Evidence of leadership and teamwork skills</p></li></ul></div></section>