وظائف مدير أنظمة لينكس - يونكس في سلطنة عمان

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management. Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.<br><br><b>Qualifications</b> <br><br><br><p><b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p><br> <p><b><u>Location</u></b></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><b><u>Job Details</u></b></p><br> <p><b>Requisition Number:</b>&nbsp;209925&nbsp;&nbsp;<br> <b>Experience Level:&nbsp;</b>Experienced Hire&nbsp;<br> <b>Job Family:</b>&nbsp;Engineering/Science/Technology&nbsp;<br> <b>Product Service Line:&nbsp;</b>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br> <b>Full Time / Part Time:&nbsp;</b>Full Time</p><br> <p><b>Additional Locations for this position:&nbsp;</b></p><br> <p><u><b>Compensation Information</b></u><br> Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require CCTV and Electronical Engineer for group of Company at Oman. Candidates must know CCTV installation, Fire Alarm, ELV &amp; LV System. Candidate must know NFPA Standard.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must know CCTV installation, Fire Alarm, ELV &amp; LV System. Candidate must know NFPA Standard.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Develop and execute Test Plans, Test Cases and Test Scripts.</p></li><li><p>Perform Manual Testing, Functional Testing, Regression Testing, Smoke Testing and User Acceptance Testing (UAT).</p></li><li><p>Test Enterprise AI applications, RAG platforms, AI Agents and AI Chatbots.</p></li><li><p>Validate AI-generated responses for accuracy, relevance, consistency and factual correctness.</p></li><li><p>Identify AI hallucinations, incorrect responses and workflow issues.</p></li><li><p>Test ERP systems, enterprise portals, customer portals, university portals and complex web applications.</p></li><li><p>Perform API testing using Postman or similar tools.</p></li><li><p>Validate integrations with databases, third-party APIs, email systems and business applications.</p></li><li><p>Perform cross-browser, responsive and mobile compatibility testing.</p></li><li><p>Report, track and verify software defects using bug tracking tools.</p></li><li><p>Collaborate with Developers, Business Analysts and Product Managers to ensure high-quality releases.</p></li><li><p>Participate in Agile/Scrum development processes.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum 2 years of experience</strong> in Software Testing / Quality Assurance.</p></li><li><p>Strong understanding of SDLC and STLC.</p></li><li><p>Experience testing web-based enterprise applications.</p></li><li><p>Experience in Manual Testing and Regression Testing.</p></li><li><p>Basic knowledge of API Testing (Postman or similar).</p></li><li><p>Basic SQL knowledge for database validation.</p></li><li><p>Experience using Jira, Azure DevOps or similar bug tracking tools.</p></li><li><p>Strong analytical, troubleshooting and problem-solving skills.</p></li><li><p>Good written and verbal communication skills.</p></li></ul><br><p><strong>AI Experience (Preferred)</strong></p><p>Experience with any of the following will be an advantage:</p><ul><li><p>Generative AI Applications</p></li><li><p>Retrieval-Augmented Generation (RAG)</p></li><li><p>AI Agents</p></li><li><p>AI Chatbots</p></li><li><p>OpenAI / ChatGPT integrations</p></li><li><p>Large Language Models (LLMs)</p></li><li><p>OCR &amp; Intelligent Document Processing</p></li><li><p>Enterprise Knowledge Management Systems</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e FPGA - Jeune Diplômé F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Dans un contexte de forte croissance des secteurs aéronautique et défense, nous recherchons un ingénieur de développement FPGA expérimenté pour participer à la conception de produits innovants, technologiques et performants.<br>À ce poste, vous serez responsable du développement de fonctions FPGA complexes, de leur vérification par simulation, ainsi que de l'intégration sur cartes électroniques.<br>Vous travaillerez sur diverses plateformes (Microchip, Altera, Xilinx), sur des FPGA au cœur de nos produits. </p><br><br><p>Vous pourrez intervenir sur différentes phases :<br>- Coder et simuler des blocs fonctionnels,<br>- Réaliser des tests aux bornes du FPGA sur carte électronique pour en vérifier le<br>fonctionnement</p><br><br><p>Compétences techniques attendues :<br>- Connaissance des langages de description HDL, VHDL,Verilog ou SystemVerilog.<br>- Connaissance des contraintes de Timing (STA).<br>- Connaissance des outils de simulation (Questa), de synthèse et de P&amp;R FPGA<br>Compétences transverses et savoir-être :<br>- Organisé et rigoureux dans le travail quotidien.<br>- Excellent relationnel et capacité à communiquer efficacement au sein d'une équipe.</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p>REQUIRED BIOMEDICAL ENGINEER 2 OMAN BASED PRIVATE HOSPITAL</p><p><br></p><p>MALE OR FEMALE CANDIDATES</p><p><br></p><p>QUALIFICATION: B TECH</p><p><br></p><p>EXPERIANCE: 2 YEARS IN HOSPITAL FIELD</p><p><br></p><p>ACCOMODATION : PROVIDED</p><p><br></p><p>ONLINE INTERVIEW SOON</p><p>Role: Application Engineer</p><p>Industry Type: Medical Services / Hospital</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Biomedical Engineering</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>QUALIFICATION: B TECH EXPERIANCE: 2 YEARS IN HOSPITAL FIELD</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><i><strong><u>Primary Responsibility</u>:</strong></i></span></p><br><ul><li><span><i>Supervision of OHL and Cable foundations</i></span></li><li><span><i>Review and approval of method statements.</i></span></li><li><span><i>Review of risk assessments and implementation of control measures.</i></span></li><li><span><i>Ensuring compliance with HSE requirements during construction activities and adherence to AFC drawings.</i></span></li><li><span><i>Supervision of civil works associated with OHL projects, including foundations and related infrastructure.</i></span></li><li><span><i>Monitoring site activities to ensure adherence to project specifications, quality standards, and construction schedules.</i></span></li></ul> <p><span><i><strong><u>Education, Qualifications and Experience:</u></strong></i></span></p><br><p><span><i>Bachelor of Engineering with 12 years of experience</i></span></p><br><strong>Moving forward together</strong><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span>15+ Years of experience in Instrumentation Engineering</span></span></p><br><p><span><span>Strong Background in Instrumentation Design Engineering Support</span></span></p><br><p><span><span>At least 10 Years of experience in Oil and Gas Industry</span></span></p><br><p><span><span>Competence in reviewing instrument deliverables and coordinating with multidisciplinary teams.</span></span></p><br> <p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for overseeing electrical engineering activities, reviewing electrical systems, and supporting installation, testing, and commissioning works.</p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering or equivalent.&nbsp;</p></li><li><p>Minimum&nbsp;five years of relevant experience&nbsp;in a similar role, including experience in at least&nbsp;two IPP projects within the last five years.</p></li><li><p>Must have proven experience in&nbsp;electrical protection systems&nbsp;and in the&nbsp;testing and commissioning&nbsp;of similar projects.</p><br></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Testing &amp; Commissioning Roles &amp; Responsibilities</p><br><p>The T&amp;C engineer is responsible for planning test procedures, coordinating with construction teams, verifying equipment installation, and conducting functional and performance tests. Supervisors assist in site inspections, documentation, and ensuring safety compliance. Technicians execute testing activities, record readings, and report abnormalities. Quality and safety teams ensure adherence to regulations and risk control measures. Proper documentation, reporting, and handover to the client are key responsibilities, ensuring the system is reliable, efficient, and ready for operation.</p><br><p>From Basic Cable schedule preparation, LVAC &amp; LVDC Commissioning, GIS &amp; CRP Interlock, Scheme Tests,</p><br><p>Auxiliary Relay Test, Back up Relay Test &amp; Remote End modification works etc</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Instrumentation Asset Data &amp; SAP PM Engineer is responsible for ensuring the accuracy, completeness, and integrity of instrumentation asset data, conducting equipment criticality assessments, and maintaining asset master data within SAP Plant Maintenance (PM). The role supports maintenance reliability, asset performance, and operational excellence by standardizing equipment information and ensuring compliance with engineering and maintenance standards.</p><br><ul><li><p>Review instrumentation records to identify missing, inaccurate, or incomplete equipment data.</p></li><li><p>Verify equipment information using P&amp;IDs, loop diagrams, instrument index, datasheets, and asset registers.</p></li><li><p>Coordinate with Engineering, Maintenance, and Operations teams to collect and validate equipment information.</p></li><li><p>Prepare and standardize equipment datasheets for pressure, temperature, flow, level, analyzers, control valves, and other instrumentation assets.</p></li><li><p>Update technical specifications, operating ranges, calibration details, and equipment parameters while ensuring document accuracy and revision control.</p></li><li><p>Perform equipment criticality assessments based on safety, environmental, production, and reliability impacts.</p></li><li><p>Classify instrumentation assets according to operational risk and support the development of preventive and predictive maintenance strategies.</p></li><li><p>Create, update, and maintain SAP PM master data, including Equipment Masters, Functional Locations, Classification, and Maintenance Plans.</p></li><li><p>Ensure proper asset hierarchy, coding standards, and data quality within SAP.</p></li><li><p>Support asset management initiatives by maintaining accurate equipment records and improving master data quality.</p></li><li><p>Ensure compliance with company engineering standards, maintenance procedures, and HSE requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Instrumentation Engineering or a related Engineering discipline.</p></li><li><p>Minimum <strong>5 years</strong> of experience in instrumentation maintenance, reliability, or asset management within industrial environments.</p></li><li><p>Hands-on experience with <strong>SAP Plant Maintenance (SAP PM)</strong>, including Equipment Master Data and Functional Locations.</p></li><li><p>Strong knowledge of industrial instrumentation, calibration, P&amp;IDs, loop diagrams, and engineering documentation.</p></li><li><p>Experience in equipment criticality assessment and maintenance planning is preferred.</p></li><li><p>Proficient in Microsoft Office applications, particularly Excel.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>About us</strong>&nbsp;<br>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;<br><ul><li>4+ Years of experience in Electrical Engineering</li><li>Strong Background in Electrical&nbsp;Design Engineering Support</li><li>At least 2 Years of experience in Oil and Gas Industry</li><li>Competence in reviewing electrical deliverables and coordinating with multidisciplinary teams.</li><li>Competent use of electrical engineering specific software.</li><li>Competent use of relevant software such as MS Office Suite.</li></ul> <strong>Qualification Required:</strong><br>Bachelor Degree in Engineering<br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Goodman Masson is partnering with a new financial markets infrastructure venture under formation in Oman.<br> Backed by prominent institutional investors, the business is building a greenfield platform from the ground up, and is now hiring at the build stage.<br> This is a rare chance to help stand up critical market infrastructure from a blank sheet and then run what you have built.<br> The role The Network and Security Engineer builds and looks after the network the platform runs on, and keeps it secure at the same time.<br> In the build phase you help design and then stand up the network from the ground up.<br> In the run phase you keep it working, watch it, and fix it when something breaks.<br> What you will do Help design and then build the network: segmentation and zoning, routing and switching, firewalls, load balancing, DNS, and time synchronisation, engineered for steady low-latency performance Set up and secure connectivity to external counterparties such as custodians, settlement banks, and market systems Own perimeter and internal network security in the first line: firewalls, segmentation, secure and privileged remote access, and certificate and encryption management Keep network devices patched and hardened, support penetration testing, and close network findings Lead the first response to network and security incidents, and escalate cleanly when needed Keep the network documented to a standard that holds up under review Location and terms Based in Muscat, Oman.<br> Permanent for Omani nationals; two-year fixed-term contract for expatriate hires.<br> Omani nationals are strongly encouraged to apply.<br> If this is your kind of build, please apply now!<br> What you will bring Degree in computer science, networking, information security, or a related field, or equivalent hands-on experience At least six years in network engineering, with direct hands-on responsibility for network security as well as the network itself Strong network design and operation: segmentation and zoning, routing and switching, firewalls, load balancing, secure remote access, and low-latency design Direct experience owning first-line network security including firewalls, hardening, certificates, and secure connectivity Experience securing external-facing connectivity in a regulated or high-assurance setting Experience leading the first response to a live network or security incident Hands-on credibility: able to configure a firewall and a switch, segment a network, read a packet capture, and challenge a vendor design Fluent English, written and spoken Also of interest Experience in financial services or financial market infrastructure such as a central securities depository, central counterparty, exchange, or payment system Experience with secure connectivity to SWIFT, Bloomberg, or the international central securities depositories Infrastructure-as-code and automation experience such as Terraform or Ansible Relevant certifications in networking such as CCNP or CCIE, and in security such as CISSP</span> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>Metallic and non-metallic piping experience needed.</p> <p>Qualification should be engineering (Mech or Civil).</p> <p>Computer knowledge: MS Office, Word, Excel, and PPT mandatory with good skills required in these.</p> <p>Communication skills: Client meetings, internal handling with production and procurement team, MOM preparation, and report making are needed.</p> <p>Some knowledge about site activity will be an added advantage.</p> <p>Ability to handle multiple projects in parallel, working under pressure.</p> <p>Some knowledge about ERP system; training can be provided if needed.</p> <p>Ability to understand the piping GA, isometrics, and alignment sheet drawings will be an added advantage.</p> <p>Work location: Sohar, Oman. Full-time permanent position; this is not a contract role.</p> <p>Joining date: Willing to join immediately.</p> <p><strong>Experience:</strong> Minimum 2 to 5 years in Oil & Gas field.</p> <p><strong>Salary:</strong> 350 to 500 OMR based on experience and knowledge.</p> <p>Visa: 2 years work visa will be provided.</p> <p>Food, accommodation, transport, medical, and insurance will be provided by the company.</p> <p>12 months once, 30 days paid annual leave will be provided.</p></p><p></p>

<p><h4>Description</h4> <p>Metallic and non-metallic piping experience needed.</p> <p>Qualification should be engineering (Mech or Civil).</p> <p>Computer knowledge: MS Office, Word, Excel, and PPT mandatory with good skills required in these.</p> <p>Communication skills: Client meetings, internal handling with production and procurement team, MOM preparation, and report making are needed.</p> <p>Some knowledge about site activity will be an added advantage.</p> <p>Ability to handle multiple projects in parallel, working under pressure.</p> <p>Some knowledge about ERP system; training can be provided if needed.</p> <p>Ability to understand the piping GA, isometrics, and alignment sheet drawings will be an added advantage.</p> <p>Work location: Sohar, Oman. Full-time permanent position; this is not a contract role.</p> <p>Joining date: Willing to join immediately.</p> <p><strong>Experience:</strong> Minimum 2 to 5 years in Oil & Gas field.</p> <p><strong>Salary:</strong> 350 to 500 OMR based on experience and knowledge.</p> <p>Visa: 2 years work visa will be provided.</p> <p>Food, accommodation, transport, medical, and insurance will be provided by the company.</p> <p>12 months once, 30 days paid annual leave will be provided.</p></p><p></p>

<p><h4>Please submit your CV in English and indicate your level of English proficiency.<\/h4>\n<p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<\/p>\n<h4>What this opportunity involves:<\/h4>\n<p>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<\/p>\n<p>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<\/p>\n<ul>\n <li>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history<\/li>\n <li>Design tasks from intermediate states of these environments - craft the prompt, define what \"solved\" means, and ensure the task is solvable by an AI agent<\/li>\n <li>Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient<\/li>\n <li>Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<\/li>\n<\/ul>\n<h4>What this is not:<\/h4>\n<ul>\n <li>Not data labeling<\/li>\n <li>Not prompt engineering<\/li>\n <li>Not writing code from scratch - the agent writes most of the code; you guide and evaluate<\/li>\n<\/ul>\n<h4>What we look for:<\/h4>\n<ul>\n <li>8+ years in software development<\/li>\n <li>Core stack: Python (FastAPI), JavaScript\/TypeScript (React), Docker, Postgres, Kafka, Redis<\/li>\n <li>Experience writing tests (functional, integration)<\/li>\n <li>English proficiency - B2+<\/li>\n<\/ul>\n<h4>Why this is hard:<\/h4>\n<p>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<\/p>\n<h4>How it works<\/h4>\n<p>Apply? Pass qualification(s)? Join a project? Complete tasks? Get paid.<\/p>\n<h4>Effort estimate<\/h4>\n<p>Tasks for this project are estimated to take 30 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<\/p><\/p><p><\/p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Principal Reservoir Engineering Grade Stream Upstream E&amp;P Function Operated Assets Subsurface - Development Location Oman - HO Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Bisat WRM Direct reports Job purpose <br>Apply reservoir engineering &amp; Simulation to the subsurface development ABB Development, by (1) Conducting workflows pertaining to reserves maturation, well testing, field development planning update reservoir management strategies, (2) Monitor a range of activities, including well surveillance, fluid sampling, well testing and completion operations, (3) Work and support with multi-disciplinary team to apply reservoir engineering practices to reservoir management, well test design and analysis, reservoir simulation, reserves evaluation &amp; estimation, and (4) Directing lab workflows, managing lab data, working PVT data analysis (with internal and external PVT reports), developing EoS models &amp; BOT, developing final report, and presenting post project reviews with BUs. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives. Main tasks and responsibilities <br><br>Provide guidance to support the Manager ABB Development in achieving desired performance objectives. <br>Guide Manager ABB Development &amp; Reservoir Team to aid in maintaining high technical standards <br>Guide on development plans / programs as required by the Manager ABB Development <br>Guide on fluid characterization studies for understanding fluid distribution in the field Guide on analysis and interpretation of RFT / MDT data as required <br>Participate in integrated field studies for maturing hydrocarbon resources <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Guide on RE input to business planning, reserve evaluation and well proposals <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Provide RE input to business planning, reserve evaluation and well proposals <br>Participate in integrated field studies <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Coach and mentor early career professionals Participate in integrated field studies for maturing hydrocarbon resources <br><b>Key interactions <br></b>Internal: Subsurface Development &amp; Exploration / Well Delivery / Facilities / Operations / Supply Chain <br>External: Contractors, Technical Committees Notable Working Conditions. Field operations and o ffice environment, computer screen use. Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p><p></p></section>