وظائف رائد نشاط

<p>"1) Daily check and deliver farm updated reports to Plot Manager.</p><ol><li><p>Daily monitoring mortality & culls and observing bird’s behavior and feeding & drinking activity.</p></li><li><p>In case of abnormally high mortality informing Vet care Supervisor & concerned Plot Manager immediately."</p></li></ol><p>"4) Instruction to farm forman for necessary tasks, especially after farm visit in written.</p><ol><li><p>Organize washing and cleaning of the uniforms and towels on daily basis.</p></li><li><p>Organize specific operations i.e., grading vaccination, beak trimming, rejects and sex error removal etc."</p></li></ol><p>"7) Applying all bio-security recommendations and supervising the medication if needed and to maintain farm and staff & living hygiene.</p><ol><li><p>Weighing birds on weekly basis as per protocol & keeping records."</p></li></ol><p>"Daily visiting farm and observe following:</p><p>a) Daily Feeding time</p><p>b) Temperature and humidity</p><p>c)Environment of the poultry house</p><p>d) Ventilation parameters</p><p>e) Litter condition</p><p>f) Feeder and nipple lines</p><p>g) Light duration on / off / intensity</p><p>h) Feed and water distribution</p><p>i) Water pressure in pressure tube</p><p>j) Bird’s activity, fleshing, health status</p><p>k) Attendance record "</p><p>"9) Supervising the grading of pullets as per standard operating procedure.</p><ol><li><p>Deciding for feed allocation (increment) based on body weight gain and deviation from std body weight.</p></li><li><p>Keeping optimum level of biosecurity within the farm by organizing the main farm entrance foot dip cleaning and refreshing it with disinfectant.</p></li><li><p>Collecting feed, water & blood samples as required.</p></li></ol><p>"</p><p>"13) Ensure cooling pads clean as per schedule given.</p><ol><li><p>Ensuring feed demand request as per amount to be given to the birds on weekly basis.</p></li><li><p>Ensuring the efficiency of fans, lighting equipment, heaters, and thermometers and measuring scales etc. and getting them calibrated periodically."</p></li></ol><p>"16) Distributing & counting of birds in pens according to the population of the pen. 17) Beak trimming and correction of males and females as required.</p><ol><li><p>Adjustment of feeding ,watering & floor space whenever required.</p></li><li><p>Supervising operations like preparation, cleaning and disinfections between the crops. "</p></li></ol><p>"20) Continuous training and upgrading of new and existing employees and keeping records of training.</p><ol><li><p>Applying the Management policies and technical factors for the optimum performance of the flock.</p></li><li><p>Administering lighting program according to standard procedures."</p></li></ol><p>"23) Observing daily production and taking steps to have the maximum hatching eggs and check daily egg rejection at farm level.</p><ol><li><p>Supervising daily egg collection as per schedule given for auto collection and grading of eggs.</p></li><li><p>Keeping hatch able eggs inside egg store immediately after collection and grading next day before packing in carton boxes."</p></li></ol><p>"26) Daily egg weighing as per procedure and keep record at farm as weekly egg weight.</p><ol><li><p>Dispatch all hatch able and reject eggs to Main egg warehouse store.</p></li><li><p>Strict to Standard operating procedures and ready for audit as per system."</p></li></ol><br><p><strong>Desired Candidate Profile</strong></p><p>A diligent employee who understands the requirements for Poultry Health</p>

<p>The Preventive Maintenance Supervisor (PMS) is responsible for planning, coordinating, and supervising preventive maintenance activities to ensure the safe, reliable, and efficient operation of plant equipment and facilities.</p><p>The role ensures maintenance programs are executed in accordance with company standards, OEM recommendations, and regulatory requirements while minimizing equipment downtime and maximizing asset integrity.</p>

<p>We are looking for an experienced Structural Supervisor to oversee structural steel fabrication and erection activities, ensuring work is carried out safely, efficiently, and in accordance with project specifications and quality standards.</p><p>Key Responsibilities:</p><ul><li>Supervise structural steel fabrication and erection work at site.</li><li>Monitor daily activities and ensure work is completed as per project schedules.</li><li>Interpret structural drawings and coordinate with engineers and site teams.</li><li>Ensure compliance with quality, safety, and company standards.</li><li>Prepare progress reports and resolve on-site technical issues.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma/Degree in Civil, Mechanical Engineering, or a related field.</p><p>4 7 years of experience in structural steel fabrication, erection, or construction projects.</p><p>Strong knowledge of structural drawings, fabrication, and erection techniques.</p><p>Good leadership, communication, and problem-solving skills.</p><p>Familiarity with site safety regulations and quality procedures.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Apt Resources is seeking a dedicated Date Palm Supervisor to oversee operations on a prestigious date palm farm in Abu Dhabi.<br> In this role, you will be responsible for managing the cultivation and harvesting of date palms, ensuring the farm operates efficiently while maintaining the highest standards of quality.<br> The ideal candidate will have a strong background in agricultural practices related to date palms and be passionate about sustainable farming.<br> Responsibilities Supervise daily farm operations, including planting, irrigation, fertilization, and harvesting of date palms.<br> Train and manage farm workers on best agricultural practices and safety protocols.<br> Monitor the health of the date palms and implement pest management strategies as needed.<br> Maintain detailed records of farm activities and production metrics.<br> Collaborate with agricultural specialists to develop strategies for improving yield and quality.<br> Ensure compliance with agricultural standards and environmental regulations.<br> Assist in budget management and resource allocation for the farm.<br> Salary AED 5,500 plus free accommodation, Food, and other benefits as per UAE Labor Law.<br> Proven experience as a Supervisor on a date palm farm or in a related agricultural role.<br> Strong knowledge of date palm cultivation techniques and pest management.<br> Excellent leadership and team management skills.<br> Ability to work outdoors in varying weather conditions.<br> Strong organizational skills and attention to detail.<br> Effective communication skills, both verbal and written.<br> Willingness to work flexible hours, including weekends and holidays as needed.<br></span> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision. Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li>Wells custodianship Receiving all handovers from WS (hoist), sending handovers to construction for hook up. Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity. In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points. Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li>Other off plot activities: Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning. Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations. Implement and maintain HSE policies, procedures, and best practices. Conduct regular safety audits, risk assessments, and emergency drills. Promote safety awareness and lead incident investigations, providing corrective actions. Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports). Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><h2>Key interactions</h2><ul><li>Internal: Upstream</li><li>External: Contractors, Vendors &amp; Suppliers</li></ul><h2>Notable Working Conditions</h2>Field Operations and office environment, Moderate to intensive computer screen use.<p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelor Supervisor 5-7 years of relevant experience</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform</li><li>Surface Operations Off Plot</li><li>Field Production Operation</li><li>Water Treatment</li></ul>

<p>We have openings for our prestigious client in Oman; they have openings for Fleet Supervisor &amp; QA QC Lead (Mechanical) Experience in Oil &amp; Gas Oman Location PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of Birth:- Age:- Below is the open positions: - A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor. B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills. Please inform your friends &amp; colleagues for the same. Warm Regards, Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services Branches: - Surat (HO) | Navi Mumbai | Oman | UAE Mobile: - PHONE_NUMBER Email id: - EMAIL_ADDRESS Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST.</p><p>A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor.</p><p>B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Restaurant Supervisor - Hospitality provides operational, technical, and functional leadership across hospitality activities while ensuring alignment with organizational standards, business objectives, and regulatory requirements. The role is responsible for driving performance, coordination, compliance, stakeholder engagement, and service delivery within the service operations function. The position supports continuous improvement initiatives, cost optimization, operational efficiency, and quality outcomes while collaborating closely with internal teams, contractors, clients, and business stakeholders.</p><br><br><br><u><b>Job Responsibilities 1</b></u> <br>Operational Management: Manage day-to-day service operations activities within the hospitality environment to ensure efficient execution, compliance with procedures, and achievement of operational targets while maintaining service quality and productivity standards. Planning and Coordination: Coordinate schedules, manpower, materials, contractors, and operational activities to ensure timely completion of tasks, projects, and deliverables in line with approved timelines and business requirements. Stakeholder Engagement: Liaise with internal departments, consultants, suppliers, subcontractors, clients, and operational teams to ensure smooth communication, issue resolution, and alignment on technical and operational requirements. Compliance and Governance: Ensure compliance with company policies, contractual obligations, regulatory standards, HSE requirements, and industry best practices applicable to the hospitality sector. Performance Monitoring: Monitor operational KPIs, productivity, service standards, and quality benchmarks while identifying gaps, implementing corrective actions, and driving continuous improvement initiatives. Reporting and Documentation: Prepare operational reports, technical records, progress updates, cost analyses, and management presentations to support decision-making, audit readiness, and business transparency. Resource Optimization: Support efficient utilization of manpower, equipment, budgets, materials, and operational resources to improve productivity, reduce waste, and optimize operational costs. Risk and Issue Management: Identify operational risks, technical challenges, delays, and performance issues while implementing mitigation measures and escalation processes to minimize business impact. Quality Assurance: Support the implementation of quality assurance and quality control procedures to ensure services, deliverables, and operational outputs meet company and client expectations. Continuous Improvement: Contribute to process enhancements, digital initiatives, workflow optimization, and operational excellence programs to improve efficiency, service delivery, and overall business performance.<br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br>Sector Operations Knowledge: Strong understanding of operational requirements, standards, workflows, and regulatory expectations within the hospitality sector. Technical and Functional Expertise: Advanced knowledge of service operations processes, documentation, reporting standards, systems, and operational controls relevant to the role. Stakeholder Coordination: Ability to manage cross-functional communication, contractor coordination, client engagement, and team collaboration within fast-paced operational environments. Systems and Reporting: Proficiency in ERP systems, reporting tools, Microsoft Office applications, operational dashboards, and performance tracking methodologies. Problem Solving and Decision Making: Strong analytical, organizational, and decision-making capabilities with the ability to resolve operational issues and support business continuity.<br><br><u><b>Job Experience</b></u> <br>Industry Experience: Proven experience within the hospitality sector handling operational, technical, project, or functional responsibilities related to the role. Operational Coordination Exposure: Demonstrated experience coordinating teams, contractors, stakeholders, resources, and service delivery activities within complex operational environments. Compliance and Performance Management: Experience supporting KPI management, reporting, process improvement, quality compliance, and operational efficiency initiatives.<br><br><u><b>Competencies</b></u> <br>Leadership<br>Resilience<br>Quality<br>Agility<br>AI Fluency<br><br><br><u><b>Education</b></u> <br><br><br> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role Overview</h4> <p>We are seeking an experienced PCC (Pre-Commissioning & Commissioning) System Supervisor – Cybersecurity to supervise and coordinate cybersecurity related activities during pre-commissioning and commissioning phases of a large LNG facility. The role focuses on field execution, system readiness, compliance, and safe integration of OT/ICS systems prior to startup and handover to operations.</p> <p>This is a site-based supervisory role, suited to professionals with hands-on experience supporting OT cybersecurity implementation during EPC commissioning projects.</p> <h4>Key Responsibilities</h4> <ul> <li>Supervise and coordinate cybersecurity activities during pre-commissioning and commissioning phases</li> <li>Support system readiness for secure commissioning of: <ul> <li>DCS, ESD, F&G, PLC, and SCADA systems</li> <li>Network infrastructure, servers, workstations, and interfaces</li> </ul> </li> <li>Ensure cybersecurity requirements are implemented in line with: <ul> <li>Project cybersecurity standards</li> <li>OT/ICS security procedures</li> <li>Regulatory and company policies</li> </ul> </li> <li>Coordinate with automation, instrumentation, IT/OT, and commissioning teams to ensure secure system integration</li> <li>Supervise field implementation of: <ul> <li>Network segmentation and access control</li> <li>User account and privilege configuration</li> <li>Antivirus, patching, and system hardening activities</li> </ul> </li> <li>Support cybersecurity testing activities, including: <ul> <li>Vulnerability checks (as defined by project scope)</li> <li>Secure communication and access verification</li> </ul> </li> <li>Verify mechanical completion (MC) and readiness for commissioning from a cybersecurity perspective</li> <li>Support punch list identification and closeout related to cybersecurity scope</li> <li>Ensure all activities are executed in compliance with HSE, PTW (permit to work), and SIMOPS (simultaneous operations) requirements</li> <li>Report cybersecurity readiness, issues, and risks to the PCC system lead / commissioning manager</li> </ul> <h4>Mandatory Requirements (Strict)</h4> <h5>Education</h5> <p>Bachelor’s degree or diploma in cybersecurity, information technology, automation, instrumentation, electrical engineering, or related discipline.</p> <h5>Experience</h5> <ul> <li>Minimum 8–10 years experience in oil & gas or LNG projects</li> <li>Proven experience supporting OT/ICS cybersecurity during pre-commissioning and commissioning phases</li> <li>Site-based experience on large EPC projects</li> <li>Hands-on exposure to commissioning of control systems and industrial networks</li> <li>Candidates without site commissioning exposure in OT cybersecurity environments will not be considered</li> </ul> <h5>Technical Expertise</h5> <ul> <li>Practical knowledge of: <ul> <li>OT/ICS cybersecurity principles</li> <li>Industrial networks (firewalls, switches, VLANs)</li> <li>Secure commissioning of DCS, ESD, F&G, PLC systems</li> </ul> </li> <li>Familiarity with: <ul> <li>Network segmentation and access control</li> <li>System hardening and patching practices</li> <li>Cybersecurity compliance checks during commissioning</li> </ul> </li> <li>Ability to work from commissioning procedures, system dossiers, and test documentation</li> </ul> <h5>Supervisory & Professional Skills</h5> <ul> <li>Strong site coordination and supervision capability</li> <li>Good interface management with automation, instrumentation, IT/OT, and operations teams</li> <li>Safety driven mindset with PTW and SIMOPS experience</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal Background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG or gas processing facility experience</li> <li>OT cybersecurity involvement during commissioning and startup phases</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role Overview</h4> <p>We are seeking an experienced PCC (Pre-Commissioning & Commissioning) System Supervisor – Cybersecurity to supervise and coordinate cybersecurity related activities during pre-commissioning and commissioning phases of a large LNG facility. The role focuses on field execution, system readiness, compliance, and safe integration of OT/ICS systems prior to startup and handover to operations.</p> <p>This is a site-based supervisory role, suited to professionals with hands-on experience supporting OT cybersecurity implementation during EPC commissioning projects.</p> <h4>Key Responsibilities</h4> <ul> <li>Supervise and coordinate cybersecurity activities during pre-commissioning and commissioning phases</li> <li>Support system readiness for secure commissioning of: <ul> <li>DCS, ESD, F&G, PLC, and SCADA systems</li> <li>Network infrastructure, servers, workstations, and interfaces</li> </ul> </li> <li>Ensure cybersecurity requirements are implemented in line with: <ul> <li>Project cybersecurity standards</li> <li>OT/ICS security procedures</li> <li>Regulatory and company policies</li> </ul> </li> <li>Coordinate with automation, instrumentation, IT/OT, and commissioning teams to ensure secure system integration</li> <li>Supervise field implementation of: <ul> <li>Network segmentation and access control</li> <li>User account and privilege configuration</li> <li>Antivirus, patching, and system hardening activities</li> </ul> </li> <li>Support cybersecurity testing activities, including: <ul> <li>Vulnerability checks (as defined by project scope)</li> <li>Secure communication and access verification</li> </ul> </li> <li>Verify mechanical completion (MC) and readiness for commissioning from a cybersecurity perspective</li> <li>Support punch list identification and closeout related to cybersecurity scope</li> <li>Ensure all activities are executed in compliance with HSE, PTW (permit to work), and SIMOPS (simultaneous operations) requirements</li> <li>Report cybersecurity readiness, issues, and risks to the PCC system lead / commissioning manager</li> </ul> <h4>Mandatory Requirements (Strict)</h4> <h5>Education</h5> <p>Bachelor’s degree or diploma in cybersecurity, information technology, automation, instrumentation, electrical engineering, or related discipline.</p> <h5>Experience</h5> <ul> <li>Minimum 8–10 years experience in oil & gas or LNG projects</li> <li>Proven experience supporting OT/ICS cybersecurity during pre-commissioning and commissioning phases</li> <li>Site-based experience on large EPC projects</li> <li>Hands-on exposure to commissioning of control systems and industrial networks</li> <li>Candidates without site commissioning exposure in OT cybersecurity environments will not be considered</li> </ul> <h5>Technical Expertise</h5> <ul> <li>Practical knowledge of: <ul> <li>OT/ICS cybersecurity principles</li> <li>Industrial networks (firewalls, switches, VLANs)</li> <li>Secure commissioning of DCS, ESD, F&G, PLC systems</li> </ul> </li> <li>Familiarity with: <ul> <li>Network segmentation and access control</li> <li>System hardening and patching practices</li> <li>Cybersecurity compliance checks during commissioning</li> </ul> </li> <li>Ability to work from commissioning procedures, system dossiers, and test documentation</li> </ul> <h5>Supervisory & Professional Skills</h5> <ul> <li>Strong site coordination and supervision capability</li> <li>Good interface management with automation, instrumentation, IT/OT, and operations teams</li> <li>Safety driven mindset with PTW and SIMOPS experience</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal Background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG or gas processing facility experience</li> <li>OT cybersecurity involvement during commissioning and startup phases</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Role summary</h4> <p>A Coiled Tubing Field Specialist is a senior field-based role responsible for leading and executing complex coiled tubing and well intervention operations with a high level of technical expertise and operational authority. The role ensures safe, efficient, and reliable delivery of services while acting as the key technical leader on location in the absence of, or in support of, the Field Supervisor.</p> <p>The Field Specialist III is accountable for managing critical operational phases, troubleshooting complex wellsite challenges, and ensuring full compliance with HSE, well control, and client requirements.</p> <h4>Essential responsibilities</h4> <ul> <li>Lead and supervise complex coiled tubing operations at the wellsite</li> <li>Execute advanced interventions such as deep cleanouts, high-pressure milling, fishing operations, and stimulation support</li> <li>Oversee rig-up, pressure testing, operation, and rig-down of CTU and pressure control equipment</li> <li>Act as the primary technical authority on location during operations</li> <li>Monitor and interpret real-time operational data and make critical field decisions</li> <li>Troubleshoot complex surface and downhole equipment issues during live operations</li> <li>Ensure strict adherence to well control standards and HSE procedures</li> <li>Lead toolbox talks, risk assessments, and operational briefings</li> <li>Coordinate effectively with Field Supervisors, clients, and multi-service teams</li> <li>Mentor and train Field Specialists I/II and Field Operators</li> <li>Support job planning reviews and post-job reporting and evaluation</li> <li>Work with minimal supervision and may act as deputy or acting supervisor on location</li> <li>Hold significant technical authority during job execution</li> <li>Be accountable for operational integrity, safety, and efficiency in complex jobs</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <p><strong>Years of experience:</strong> 8-12+ years</p> <p><strong>Field of experience:</strong> 5-8+ years in coiled tubing (CT)</p> <h4>Technical skills</h4> <ul> <li><strong>Advanced coiled tubing operations</strong><br> Full understanding of coiled tubing unit (CTU) operation and limitations<br> Execution of complex jobs: cleanouts, nitrogen lifting, acid stimulation, milling, and fishing operations<br> Knowledge of tubing fatigue management, depth control, and real-time operational adjustments </li> <li><strong>Pressure control & well control systems</strong><br> Strong expertise in BOP stacks, stripper assemblies, lubricators, and wellhead systems<br> Pressure testing procedures and barrier verification<br> Ability to recognize and respond to abnormal conditions (pressure anomalies, kicks, losses) </li> <li><strong>Downhole tools & job design support</strong><br> Experience with bottom hole assemblies (BHA), motors, jars, mills, and specialty fishing tools<br> Ability to interpret job programs and ensure correct tool selection and assembly<br> Troubleshooting downhole tool performance issues </li> <li><strong>Pumping & stimulation operations</strong><br> Operation and coordination of high-pressure pumping systems<br> Understanding of fluid systems, nitrogen applications, and stimulation treatments<br> Monitoring and adjusting pressure, rate, and volume during operations </li> <li><strong>Real-time data monitoring & interpretation</strong><br> Reading and interpreting surface parameters (pressure, depth, tension, pump rates)<br> Use of real-time data acquisition systems during operations<br> Making operational decisions based on live data trends </li> <li><strong>Equipment setup, maintenance & troubleshooting</strong><br> Advanced knowledge of CTU hydraulic, mechanical, and control systems<br> Ability to diagnose equipment failures and coordinate repairs<br> Ensuring readiness of all surface and downhole equipment before operations </li> <li><strong>Wellsite execution & leadership technical input</strong><br> Ability to translate job programs into safe field execution steps<br> Supporting supervisor in operational decision-making<br> Ensuring technical compliance with engineering design and client requirements </li> <li><strong>HSE & well control systems integration</strong><br> Strong application of well control principles in live operations<br> Integration of HSE requirements into technical execution (PTW, JSA, barrier management)<br> Emergency response technical readiness </li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Leadership in the field</strong><br> Leads execution of coiled tubing operations on location when required<br> Guides operators and ensures tasks are performed correctly and safely<br> Sets the tone for discipline and operational control at the wellsite </li> <li><strong>Communication (strong and precise)</strong><br> Communicates clearly with Field Supervisor, client representatives, and crew<br> Gives accurate, real-time operational updates during critical jobs<br> Ensures instructions are understood and correctly executed </li> <li><strong>Decision-making under pressure</strong><br> Makes quick, sound decisions during live well operations<br> Balances safety, operational efficiency, and job objectives<br> Knows when to escalate issues versus taking corrective action </li> <li><strong>Situational awareness</strong><br> Continuously monitors wellsite conditions, equipment behavior, and crew activity<br> Identifies risks early and prevents escalation into incidents<br> Maintains full awareness during high-pressure operations </li> <li><strong>Problem-solving ability</strong><br> Resolves operational and equipment issues in real time<br> Applies practical field experience to troubleshooting complex situations<br> Supports engineering solutions with field insight </li> <li><strong>Mentoring & coaching</strong><br> Trains and develops Field Operators (I, II, III)<br> Shares technical knowledge and reinforces best practices<br> Helps build team competency and performance </li> <li><strong>Accountability & ownership</strong><br> Takes responsibility for assigned operations and outcomes<br> Ensures procedures and standards are strictly followed<br> Owns both success and issues in field execution </li> <li><strong>Team coordination & collaboration</strong><br> Works effectively with multi-service teams (wireline, pumping, nitrogen, client representatives)<br> Aligns activities to avoid conflicts and ensure smooth operations<br> Maintains strong working relationships in high-pressure environments </li> <li><strong>Adaptability & resilience</strong><br> Handles long shifts, remote locations, and changing job conditions<br> Adapts quickly to unexpected well behavior or operational changes </li> </ul> <h4>Tools or software (required / preferred)</h4> <p>At Field Specialist II level, the role requires both hands-on field tools knowledge and competency in digital systems used for job planning, execution, and reporting.</p> <h4>Education qualifications</h4> <p>Diploma or technical certificate or bachelor’s degree.</p> <h4>Industry background or experience (required / preferred)</h4> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining, and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Role summary</h4> <p>A Coiled Tubing Field Specialist is a senior field-based role responsible for leading and executing complex coiled tubing and well intervention operations with a high level of technical expertise and operational authority. The role ensures safe, efficient, and reliable delivery of services while acting as the key technical leader on location in the absence of, or in support of, the Field Supervisor.</p> <p>The Field Specialist III is accountable for managing critical operational phases, troubleshooting complex wellsite challenges, and ensuring full compliance with HSE, well control, and client requirements.</p> <h4>Essential responsibilities</h4> <ul> <li>Lead and supervise complex coiled tubing operations at the wellsite</li> <li>Execute advanced interventions such as deep cleanouts, high-pressure milling, fishing operations, and stimulation support</li> <li>Oversee rig-up, pressure testing, operation, and rig-down of CTU and pressure control equipment</li> <li>Act as the primary technical authority on location during operations</li> <li>Monitor and interpret real-time operational data and make critical field decisions</li> <li>Troubleshoot complex surface and downhole equipment issues during live operations</li> <li>Ensure strict adherence to well control standards and HSE procedures</li> <li>Lead toolbox talks, risk assessments, and operational briefings</li> <li>Coordinate effectively with Field Supervisors, clients, and multi-service teams</li> <li>Mentor and train Field Specialists I/II and Field Operators</li> <li>Support job planning reviews and post-job reporting and evaluation</li> <li>Work with minimal supervision and may act as deputy or acting supervisor on location</li> <li>Hold significant technical authority during job execution</li> <li>Be accountable for operational integrity, safety, and efficiency in complex jobs</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <p><strong>Years of experience:</strong> 8-12+ years</p> <p><strong>Field of experience:</strong> 5-8+ years in coiled tubing (CT)</p> <h4>Technical skills</h4> <ul> <li><strong>Advanced coiled tubing operations</strong><br> Full understanding of coiled tubing unit (CTU) operation and limitations<br> Execution of complex jobs: cleanouts, nitrogen lifting, acid stimulation, milling, and fishing operations<br> Knowledge of tubing fatigue management, depth control, and real-time operational adjustments </li> <li><strong>Pressure control & well control systems</strong><br> Strong expertise in BOP stacks, stripper assemblies, lubricators, and wellhead systems<br> Pressure testing procedures and barrier verification<br> Ability to recognize and respond to abnormal conditions (pressure anomalies, kicks, losses) </li> <li><strong>Downhole tools & job design support</strong><br> Experience with bottom hole assemblies (BHA), motors, jars, mills, and specialty fishing tools<br> Ability to interpret job programs and ensure correct tool selection and assembly<br> Troubleshooting downhole tool performance issues </li> <li><strong>Pumping & stimulation operations</strong><br> Operation and coordination of high-pressure pumping systems<br> Understanding of fluid systems, nitrogen applications, and stimulation treatments<br> Monitoring and adjusting pressure, rate, and volume during operations </li> <li><strong>Real-time data monitoring & interpretation</strong><br> Reading and interpreting surface parameters (pressure, depth, tension, pump rates)<br> Use of real-time data acquisition systems during operations<br> Making operational decisions based on live data trends </li> <li><strong>Equipment setup, maintenance & troubleshooting</strong><br> Advanced knowledge of CTU hydraulic, mechanical, and control systems<br> Ability to diagnose equipment failures and coordinate repairs<br> Ensuring readiness of all surface and downhole equipment before operations </li> <li><strong>Wellsite execution & leadership technical input</strong><br> Ability to translate job programs into safe field execution steps<br> Supporting supervisor in operational decision-making<br> Ensuring technical compliance with engineering design and client requirements </li> <li><strong>HSE & well control systems integration</strong><br> Strong application of well control principles in live operations<br> Integration of HSE requirements into technical execution (PTW, JSA, barrier management)<br> Emergency response technical readiness </li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Leadership in the field</strong><br> Leads execution of coiled tubing operations on location when required<br> Guides operators and ensures tasks are performed correctly and safely<br> Sets the tone for discipline and operational control at the wellsite </li> <li><strong>Communication (strong and precise)</strong><br> Communicates clearly with Field Supervisor, client representatives, and crew<br> Gives accurate, real-time operational updates during critical jobs<br> Ensures instructions are understood and correctly executed </li> <li><strong>Decision-making under pressure</strong><br> Makes quick, sound decisions during live well operations<br> Balances safety, operational efficiency, and job objectives<br> Knows when to escalate issues versus taking corrective action </li> <li><strong>Situational awareness</strong><br> Continuously monitors wellsite conditions, equipment behavior, and crew activity<br> Identifies risks early and prevents escalation into incidents<br> Maintains full awareness during high-pressure operations </li> <li><strong>Problem-solving ability</strong><br> Resolves operational and equipment issues in real time<br> Applies practical field experience to troubleshooting complex situations<br> Supports engineering solutions with field insight </li> <li><strong>Mentoring & coaching</strong><br> Trains and develops Field Operators (I, II, III)<br> Shares technical knowledge and reinforces best practices<br> Helps build team competency and performance </li> <li><strong>Accountability & ownership</strong><br> Takes responsibility for assigned operations and outcomes<br> Ensures procedures and standards are strictly followed<br> Owns both success and issues in field execution </li> <li><strong>Team coordination & collaboration</strong><br> Works effectively with multi-service teams (wireline, pumping, nitrogen, client representatives)<br> Aligns activities to avoid conflicts and ensure smooth operations<br> Maintains strong working relationships in high-pressure environments </li> <li><strong>Adaptability & resilience</strong><br> Handles long shifts, remote locations, and changing job conditions<br> Adapts quickly to unexpected well behavior or operational changes </li> </ul> <h4>Tools or software (required / preferred)</h4> <p>At Field Specialist II level, the role requires both hands-on field tools knowledge and competency in digital systems used for job planning, execution, and reporting.</p> <h4>Education qualifications</h4> <p>Diploma or technical certificate or bachelor’s degree.</p> <h4>Industry background or experience (required / preferred)</h4> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining, and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Supervisor is responsible for coordinating, supervising, and executing all telecom-related pre-commissioning and commissioning activities for a large industrial energy project. The role ensures that telecom systems are installed, tested, integrated, and commissioned in accordance with project specifications, safety standards, and contractual requirements in preparation for start-up and handover to operations.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Supervise all telecom pre-commissioning and commissioning activities, including system installation checks, functional testing, loop checks, and final integration.</li> <li>Ensure telecom systems are ready for energization, start-up, and operational handover.</li> <li>Coordinate telecom activities with commissioning teams, construction, instrumentation, electrical, and control systems disciplines.</li> <li>Validate readiness of telecom systems including documentation, punch lists, and mechanical completion dossiers.</li> </ul> <p><strong>Telecom systems scope</strong></p> <ul> <li>Supervise and commission a wide range of telecom and communication systems, including but not limited to:</li> <li>Fiber optic networks (FOC, ODF, splicing, OTDR testing)</li> <li>Data and voice communication systems</li> <li>Public Address & General Alarm (PAGA) systems</li> <li>Access control and CCTV systems</li> <li>Radio communication systems (VHF/UHF/TETRA)</li> <li>Telephone and intercom systems</li> <li>Telecom cabinets, racks, and field devices</li> <li>Network switches and servers (where applicable)</li> </ul> <p><strong>Testing & documentation</strong></p> <ul> <li>Review and approve method statements, test procedures, and commissioning check sheets.</li> <li>Execute and witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning tests.</li> <li>Ensure proper recording of test results, red-line drawings, and as-built documentation.</li> <li>Manage punch lists, ensure timely close-out, and support system handover to operations.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Enforce strict compliance with HSE rules, permit-to-work systems, and site safety procedures.</li> <li>Conduct toolbox talks and ensure safe execution of all telecom commissioning activities.</li> <li>Ensure telecom installations meet relevant international standards and project specifications.</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise subcontractors, vendors, and technicians involved in telecom commissioning.</li> <li>Coordinate with engineering, construction, QA/QC, and operations teams.</li> <li>Report progress, constraints, and risks to the Commissioning Manager or Discipline Lead.</li> <li>Participate in commissioning meetings, system readiness reviews, and handover sessions.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or Bachelor’s Degree in Telecommunications Engineering, Electrical Engineering, Electronics Engineering, or a related discipline.</li> <li>Minimum 8–12 years of experience in telecom systems within oil & gas, LNG, petrochemical, or large industrial projects.</li> <li>At least 3–5 years in a supervisory role focused on pre-commissioning and commissioning activities.</li> <li>Proven experience working on major EPC projects during the commissioning phase.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>