وظائف مهندس ميكانيكا معدات ثقيلة

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Preparation of MEP Drawings Create detailed Mechanical, Electrical, and Plumbing drawings using CAD/BIM software (e.g., AutoCAD, Revit). Develop shop drawings, installation drawings, and as-built drawings. Coordination of MEP Services Coordinate MEP layouts with architectural and structural drawings. Identify and resolve clashes between different building services. Review of Design Documents Interpret engineering specifications, design calculations, and project requirements. Ensure drawings comply with project standards and client requirements. Revision and Documentation Update drawings based on engineer comments and site changes. Maintain drawing revisions and document control procedures. Preparation of Shop Drawings Produce detailed fabrication and installation drawings for HVAC, electrical, plumbing, and firefighting systems. Include dimensions, elevations, sections, and installation details. Quantity Take-Off Assist in preparing material quantity take-offs from drawings. Support estimation and procurement teams with accurate drawing information. BIM Modeling (if applicable) Create and maintain 3D MEP models using BIM software. Participate in clash detection and coordination meetings. Compliance with Standards Ensure drawings comply with local building codes, industry standards and company drafting procedures. Follow applicable safety and quality requirements. Site Support Provide revised drawings based on site conditions. Assist engineers and site teams by clarifying drawing details. Record Keeping Organize drawing files and maintain project documentation. Ensure all issued drawings are properly archived and traceable.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Required Skills Proficiency in AutoCAD and Revit MEP. Knowledge of HVAC, electrical, plumbing, and fire protection systems. Understanding of engineering drawings, symbols, and standards. Familiarity with BIM coordination and clash detection. Strong attention to detail and accuracy. Good communication and teamwork skills. Ability to manage multiple projects and meet deadlines. Educational Qualifications Diploma or Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil Engineering, or a related technical field. Certification in AutoCAD, Revit MEP, or BIM is an added advantage</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Purpose<p>To perform radiographic film interpretation (RTFI) activities for welded joints and fabricated components, ensuring compliance with project specifications, client requirements, and applicable international codes and standards. The role is responsible for identifying welding discontinuities, preparing interpretation reports, and supporting quality assurance activities throughout the fabrication process.</p><br>Key Responsibilities<ul><li>Interpret radiographic films and digital radiographic images of welds, piping systems, pressure vessels, and structural components.</li><li>Evaluate radiographs for weld discontinuities including:<ul><li>Porosity</li><li>Slag Inclusions</li><li>Lack of Fusion</li><li>Lack of Penetration</li><li>Cracks</li><li>Undercuts</li><li>Tungsten Inclusions</li><li>Miscellaneous weld defects</li></ul></li><li>Review radiographs against applicable acceptance criteria.</li><li>Verify film quality, density, sensitivity, and image quality indicators (IQI).</li><li>Prepare RT film interpretation reports and maintain inspection records.</li><li>Coordinate with QA/QC Engineers, Welding Inspectors, and Production teams regarding repair and re-inspection requirements.</li><li>Ensure traceability of welds, radiographic films, and inspection reports.</li><li>Participate in client and third-party inspections.</li><li>Maintain RT film storage, indexing, and retrieval systems.</li><li>Assist in preparing manufacturing record books (MRB) and quality dossiers.</li><li>Ensure compliance with HSE requirements related to NDT operations.</li></ul>Educational Qualification<ul><li>Diploma or Bachelor's Degree in Mechanical Engineering, Welding Technology, Metallurgy, or a related discipline.</li><li>Higher Secondary qualification with extensive RT interpretation experience may also be considered.</li></ul>Certification Requirements<ul><li>Valid RT Level II Certification as per:<ul><li>ASNT SNT-TC-1A</li><li>ISO 9712</li><li>PCN</li><li>Equivalent internationally recognized certification</li></ul></li><li>Additional certifications in UT, MT, and PT will be an added advantage.</li></ul>Experience<ul><li>Minimum 5-8 years of experience in NDT and RT Film Interpretation.</li><li>At least 3 years of experience in Offshore Oil &amp; Gas, Modular Fabrication, Shipyard, EPC, or Heavy Engineering projects.</li><li>Experience in interpretation of:<ul><li>Structural Steel Welds</li><li>Piping Welds</li><li>Pressure Vessels</li><li>Process Equipment</li><li>Offshore Modules and Skids</li></ul></li></ul>Technical Knowledge<ul><li>ASME Section V</li><li>ASME Section VIII</li><li>ASME B31.3</li><li>AWS D1.1</li><li>API Codes as applicable</li><li>Project Quality Plan (PQP)</li><li>Inspection &amp; Test Plans (ITP)</li><li>Offshore fabrication quality requirements</li></ul>Key Skills<ul><li>RT Film Interpretation</li><li>Weld Defect Evaluation</li><li>NDT Documentation &amp; Reporting</li><li>Quality Control Procedures</li><li>Technical Drawing Interpretation</li><li>Report Writing</li><li>Computer Proficiency (MS Office)</li><li>Team Coordination</li></ul>Competencies<ul><li>Attention to Detail</li><li>Analytical Thinking</li><li>Quality Awareness</li><li>Integrity &amp; Compliance</li><li>Communication Skills</li><li>Problem Solving</li><li>Teamwork</li><li>Safety Focus</li></ul>Preferred Industry Experience<ul><li>Offshore Modular Fabrication Yards</li><li>Oil &amp; Gas EPC Projects</li><li>Shipbuilding &amp; Marine Fabrication</li><li>Pressure Vessel Manufacturing</li><li>Process Module Fabrication</li><li>Structural Steel Fabrication</li></ul> </div>

<p>1) Chilled water system installation, testing &amp; Commissioning. 2) VRF system installation, testing &amp; Commissioning. 3) Chilled water flushing ,water balancing &amp; Air balancing</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical Engineer with solid experience in HVAC / Chilled Water system - Should have GCC work experience - prefer Oman experience - Immediate Joiners</p>

<p>We have openings for our prestigious client in Oman; they have openings for "MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!!</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC.</p><p>2) GCC EXP IS PREFERRED</p><p>Below are the open positions:</p><ul><li>1) MEP Engineer.</li><ul><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>2) Plumbing Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>3) HVAC Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>4) Electrical Supervisor.</li><ul><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul></ul>

<p>Lead and coordinate all DRI plant activities during the assigned shift. Participate in project execution, equipment installation verification, system walk-downs, punch-list clearance and mechanical completion. Review P&amp;IDs, process flow diagrams, operating philosophies, equipment specifications and control narratives. Support pre-commissioning and commissioning activities including flushing, blowing, hydrotesting, leak testing, loop checking and equipment trials. Lead plant start-up, stabilization, normal operation and planned/emergency shutdown activities. Monitor and optimize major process areas including the reduction reactor/shaft furnace, Process Gas Heater (PGH), process gas circuit, CO removal system, natural-gas system, water-treatment facilities and associated utilities. Ensure process parameters remain within operating limits to achieve required DRI/HBI quality and production targets. Coordinate closely with panel operators, field operators, maintenance, electrical, instrumentation, laboratory and other supporting functions. Identify process deviations and equipment abnormalities and lead first-line troubleshooting. Ensure strict compliance with Permit to Work, LOTO, confined-space, gas-safety and other HSE procedures. Maintain accurate shift logs, production reports, abnormality reports and shift handover documentation. Develop and review SOPs, operating checklists and emergency operating procedures. Coach and supervise operators and ensure effective allocation of manpower during shifts. Support continuous improvement initiatives related to plant availability, productivity, energy efficiency and operational reliability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Chemical Engineering/Science or Diploma in Chemical Engineering or equivalent. Minimum 8 years' relevant experience for degree holders or 12 years for diploma holders. At least 3 years' experience as a Shift Production Supervisor/Shift In-Charge in a DRI or comparable continuous-process facility. Strong preference for experience in Tenova HYL/Energiron and/or Midrex DRI plants. Previous greenfield, brownfield expansion, revamp or commissioning experience is highly desirable. Strong understanding of DRI process chemistry, reducing-gas systems, natural-gas handling, CO removal, water treatment and process utilities. Demonstrated leadership, troubleshooting and shift-management capabilities. Strong commitment to process safety and safe plant operation.</p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p>A Engineer</p><p>Degree/Diploma in Mechanical/Electrical/Air Conditioning Engineering.</p><p>8-10 years of HVAC testing, pre-commissioning, commissioning, and TAB experience.</p><p>Hands-on experience with chillers, AHUS, FCUs, VRF/VRV, chilled water systems, BMS, and HVAC controls.</p><p>Knowledge of ASHRAE, CIBSE, BSRIA, NEBB, SMACNA, and HSE standards.</p><p>Commission chilled water systems, BMS, HVAC controls, and electrical systems.</p><p>Conduct Functional Performance Testing (FPT) and troubleshoot HVAC issues</p>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Role summary</h4> <p>Working unsupervised, installing the ESP, monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</p> <h4>Essential responsibilities</h4> <ul> <li>Under general supervision performs installation/pulling of Electrical Submersible Pumps (ESP) and associated equipment in onshore oil and water wells.</li> <li>May be required to work unsupervised.</li> <li>Assists with monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</li> <li>The position involves frequent travel on domestic assignments and time away from home, often at short notice. Handles special projects as assigned.</li> <li>Conducts all business activities in accordance with HSE policies and legal compliance requirements.</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <ul> <li>Years of experience: Minimum of 3 years of experience in Electrical Submersible Pump installation, commissioning, and troubleshooting are mandatory.</li> <li>Field of experience: Artificial Lift Systems - Electrical Submersible Pump installation and pull-out activities.</li> <li>Technical skills: <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> </li> <li>Soft skills: Customer focus, communication, interpersonal, and team working skills.</li> <li>Tools or software (required / preferred): MS Office.</li> <li>Education qualifications: Diploma or bachelor’s degree.</li> <li>Industry background or experience (required / preferred): Oil and Gas - Artificial Lift System Electrical Submersible Pump required.</li> <li>Required accreditations / qualifications / certification / licenses including driving license: LMV defensive driving experience.</li> </ul> <h4>Desirable attributes of the worker (experience / skills / competencies)</h4> <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Minimum of 3 years of experience in Electrical Submersible Pump commissioning and troubleshooting responsibilities is mandatory.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<ul><li><p>Supervise wind turbine erection, installation, mechanical completion, and associated balance-of-plant activities.</p></li><li><p>Review wind-related technical submissions, drawings, specifications, method statements, inspection plans, commissioning procedures, and test records.</p></li><li><p>Monitor construction quality, installation progress, logistics, interface constraints, and technical compliance for wind farm works.</p></li><li><p>Witness wind turbine inspections, commissioning tests, reliability runs, and performance verification activities.</p></li><li><p>Coordinate interfaces with civil, electrical, grid, planning, QA/QC, HSE, and commissioning teams.</p></li><li><p>Support review of wind plant performance data, availability records, technical issues, punch lists, and close-out documentation.</p></li><li><p>Provide discipline input to progress reports, technical meetings, risk reviews, and project close-out activities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related technical discipline.</p></li><li><p>Minimum 10 years of experience in wind turbine technology, wind farm construction, erection supervision, commissioning, or technical advisory roles.</p></li><li><p>Experience on utility-scale wind projects is required; Owner’s Engineer, PMC, LTA, or EPC supervision experience is preferred.</p></li><li><p>Familiarity with wind turbine installation, inter-array grid works, SCADA, reliability testing, availability assessment, and performance verification.</p></li><li><p>Knowledge of IEC 61400 standards and wind performance testing requirements is preferred.</p></li><li><p>Strong technical reporting, coordination, site supervision, and problem-solving skills.</p></li></ul>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Pre-Commissioning and Commissioning Electrical Supervisor to supervise and execute electrical pre-commissioning and commissioning activities on a major industrial energy development project. The role is focused on field-level supervision, ensuring safe execution of electrical testing, energization, and system handover in accordance with approved procedures, schedules, and HSE requirements.</p> <p>The successful candidate will work under the direction of the Electrical Superintendent and Engineers, overseeing technicians and contractors while coordinating closely with construction and commissioning teams.</p> <h4>Key responsibilities</h4> <h4>Pre-commissioning supervision</h4> <ul> <li>Supervise day-to-day electrical pre-commissioning activities in accordance with approved procedures and work packs.</li> <li>Verify construction completion and readiness for pre-commissioning through site walkdowns and inspections.</li> <li>Oversee execution of cable meggering, continuity checks, earthing inspections, and visual inspections.</li> <li>Ensure electrical installations are compliant with drawings, specifications, and applicable standards prior to commissioning.</li> <li>Identify, record, and report punch list items and construction deficiencies.</li> </ul> <h4>Commissioning & testing</h4> <ul> <li>Supervise commissioning and functional testing of LV and HV electrical systems as per commissioning plans.</li> <li>Support controlled energization activities under approved permit-to-work and isolation procedures.</li> <li>Oversee testing of motors, transformers, switchgear, MCCs, UPS systems, and emergency power systems.</li> <li>Ensure test results are correctly recorded and submitted in commissioning documentation.</li> <li>Support troubleshooting of electrical issues during commissioning and initial start-up.</li> </ul> <h4>Safety & HSE compliance</h4> <ul> <li>Enforce strict compliance with project HSE requirements, electrical safety rules, and energization controls.</li> <li>Supervise safe implementation of (LOTO) and electrical isolation procedures.</li> <li>Conduct toolbox talks and on-the-job safety briefings for electrical crews.</li> <li>Immediately report unsafe conditions, incidents, or near misses to commissioning management.</li> </ul> <h4>Workforce & contractor supervision</h4> <ul> <li>Supervise electrical technicians, craftsmen, and subcontractor personnel during commissioning activities.</li> <li>Ensure manpower, tools, and test equipment are available and fit for purpose.</li> <li>Monitor work quality and productivity, ensuring tasks are completed safely and efficiently.</li> <li>Coordinate daily work priorities with Engineers and Superintendents.</li> </ul> <h4>Coordination & interfaces</h4> <ul> <li>Coordinate activities with construction teams to ensure timely handover of systems.</li> <li>Interface with instrumentation, mechanical, and operations teams for integrated commissioning activities.</li> <li>Support vendor representatives during specialist commissioning, SATs, and troubleshooting.</li> <li>Communicate progress, constraints, and technical issues to senior commissioning personnel.</li> </ul> <h4>Documentation & reporting</h4> <ul> <li>Ensure completion and accuracy of pre-commissioning and commissioning check sheets and test records.</li> <li>Assist in compilation of completion dossiers and handover packages.</li> <li>Support punch list tracking and clearance to meet commissioning and handover milestones.</li> <li>Provide daily updates on work progress and issues to the commissioning team.</li> </ul> <h4>Systems covered</h4> <ul> <li>LV and HV switchgear</li> <li>Transformers</li> <li>Motors and MCC panels</li> <li>Variable frequency drives (VFDs)</li> <li>UPS and DC systems</li> <li>Emergency generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <h4>Qualifications & experience</h4> <h4>Education</h4> <ul> <li>Diploma or technical certificate in electrical engineering or equivalent.</li> <li>Trade background with strong commissioning experience will also be considered.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 8–12 years of experience in electrical works on large industrial or energy projects.</li> <li>Proven hands-on supervisory experience in pre-commissioning and commissioning activities.</li> <li>Experience in LNG, oil & gas, petrochemical, or power projects is preferred.</li> <li>Familiarity with international electrical standards (IEC, IEEE, NFPA).</li> </ul> <h4>Skills & competencies</h4> <ul> <li>Strong practical and supervisory skills in electrical commissioning activities.</li> <li>Solid understanding of electrical safety and energization procedures.</li> <li>Ability to read and interpret electrical drawings and single line diagrams.</li> <li>Good troubleshooting and problem-solving capabilities.</li> <li>Effective communication skills in a multicultural site environment.</li> <li>Basic computer skills for reporting and documentation.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role in a heavy industrial construction environment.</li> <li>May involve shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging site and climatic conditions.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<ul><li><p>Develop and implement sales strategies to achieve assigned sales targets.</p></li><li><p>Identify and develop new customers, contractors, dealers, and project opportunities.</p></li><li><p>Conduct customer visits, product presentations, demonstrations, and commercial negotiations.</p></li><li><p>Prepare quotations, negotiate prices and payment terms, and follow up until order closure.</p></li><li><p>Monitor market trends, competitor activities, customer requirements, and pricing.</p></li><li><p>Coordinate with the technical, service, spare parts, logistics, and finance teams to ensure smooth order execution.</p></li><li><p>Maintain accurate records of sales activities, customer interactions, quotations, and sales pipelines.</p></li><li><p>Achieve monthly, quarterly, and annual sales objectives.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>We are looking for an experienced and results-oriented Sales Executive with proven sales experience in heavy construction equipment and machinery(Excavators, Wheel Loaders, Bulldozers / Dozers, Dump Trucks, Cold Milling Machines, Asphalt Pavers, Feeders, Road Rollers / Compactors, Crushers). </p><br><p>The ideal candidate should have strong knowledge of the construction equipment market and an established network of customers, contractors, dealers, and equipment rental companies. The candidate will be responsible for developing new business, managing existing customers, achieving sales targets, and promoting our range of heavy construction machinery. </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>JOB TITLE<br>Junior Facility Engineer | MAF Retail | Head Office Oman<br>ROLE SUMMARY<br>The Junior Facility Engineer is responsible for preparing all sketches drawings and models to support new build, refurbishment and modification proposals supporting the Business Development team and MAF Retail operational requirements.<br>ROLE PROFILE</strong></p><br><br><ul><li>Assist in preparing and updating technical drawings, layouts, and documentation using AutoCAD.</li><li>Support facility maintenance projects and Agreements and site-related engineering activities.</li><li>Conduct site visits and collect measurements, technical data, and facility information.</li><li>Coordinate with contractors, suppliers, and internal stakeholders to ensure project requirements are met.</li><li>Maintain accurate engineering records, drawings, and project documentation.</li><li>Ensure engineering drawings comply with company standards and project specifications.</li><li>Support space planning, facility modifications, and renovation activities.</li><li>Assist in preparing reports and tracking project progress within agreed timelines.</li></ul><p><strong><br>REQUIREMENTS<br></strong></p><br><br><ul><li>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Civil Engineering, Architecture, or a related field.</li><li>1-3 years of experience in Facilities Management, Maintenance, Engineering, or Technical Drawing.</li><li>Proficiency in AutoCAD.</li><li>Good knowledge of engineering drawings and building layouts.</li><li>Strong communication and coordination skills.</li><li>Good organizational skills with strong attention to detail.</li></ul><p><strong><br>WHAT WE OFFER<br></strong></p><br><br><ul><li>At Majid Al Futtaim, we’re on a mission to create great moments, to spread happiness, to build, experiences that stay in our memories for a lifetime. We’re proud to say that over the past 27 years, we have built a reputation as a regional market leader in what we do. Join us!</li><li>Work in a friendly environment, where everyone shares positive vibes and excited about our future.</li><li>Work with over 45,000 diverse and talented colleagues, all guided by our Leadership Model.</li></ul><br> <br> </div>

<ol><li><p>Oversee the planning, preparation and execution of <strong>onshore fabrication activities</strong> from yard execution through load-out.</p></li><li><p>Manage the execution of <strong>Compression Platform Complex fabrication scope</strong> while ensuring Safety, Quality and Schedule objectives are achieved.</p></li><li><p>Supervise and control <strong>Contractor/Subcontractor activities</strong> related to topsides fabrication and Mechanical Completion.</p></li><li><p>Review <strong>constructability and technical compliance</strong> of engineering deliverables against project requirements and applicable standards.</p></li><li><p>Monitor <strong>construction progress and quality</strong>, identify critical issues or deviations, and recommend corrective actions.</p></li><li><p>Coordinate with Contractors/Subcontractors on <strong>Mechanical Completion, Pre-commissioning and Commissioning</strong> activities.</p></li><li><p>Review contractor progress reports and highlight <strong>critical problems, schedule drifts and execution issues</strong>.</p></li><li><p>Lead and participate in <strong>Risk Assessments, Pre-Job Meetings and technical meetings</strong> as required.</p></li><li><p>Maintain effective interfaces between <strong>Company, Contractor and Engineering teams</strong> to resolve construction and execution issues.</p></li><li><p>Capture and implement <strong>lessons learned</strong> from previous and current projects to improve construction execution.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor’s Degree in <strong>Science or Engineering</strong>.</p></li><li><p>Minimum <strong>10 years of experience</strong> in large-scale Oil & Gas construction-related projects.</p></li><li><p>Minimum <strong>2 years of supervisory/leadership experience</strong>, including acting roles or oversight of service/vendor personnel.</p></li><li><p>Strong experience in <strong>construction, fabrication, installation, execution, completion and/or hook-up</strong>.</p></li><li><p>Good knowledge of <strong>fabrication, welding, lifting, mechanical testing and completions</strong>.</p></li><li><p>Experience with <strong>topsides fabrication, Mechanical Completion and construction execution</strong>.</p></li><li><p>Strong <strong>Contractor/Subcontractor management</strong> and project interface experience.</p></li><li><p>Knowledge of <strong>constructability, project execution procedures, field management, design standards, specifications and applicable codes</strong>.</p></li><li><p>Experience/exposure to <strong>onshore facilities, offshore facilities/structures and/or yard operations</strong>.</p></li><li><p>Knowledge of execution methods and risks associated with <strong>LNG and sour gas production facilities</strong>.</p></li><li><p>Experience working with <strong>Oil & Gas operating companies, EPC contractors, service companies or heavy construction companies</strong>.</p></li><li><p>Candidates with experience in major Oil & Gas operating companies or leading EPC/fabrication contractors will be preferred.</p></li></ol>