فنى كابلات منخفض الفولت في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking experienced Maintenance Technicians with a minimum of 7 years of experience in luxury residences, palaces, embassies, hotels, stadiums, commercial buildings, facilities management, oil &amp; gas, or other high-profile properties. The selected candidates will be responsible for preventive and corrective maintenance activities to ensure the safe, efficient, and uninterrupted operation of a VVIP residence. The role includes electrical, HVAC, plumbing, mechanical, and general building maintenance while maintaining the highest standards of professionalism, confidentiality, and service excellence. The position requires on-call availability for emergency maintenance requirements and involves both indoor and outdoor work, including lifting, climbing ladders, and other physical maintenance tasks.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Perform preventive and corrective maintenance of buildings, utility systems, and associated facilities.</p></li><li><p>Conduct routine inspections and identify maintenance issues before failures occur.</p></li><li><p>Carry out minor repairs on electrical, plumbing, HVAC, mechanical, carpentry, and building systems.</p></li><li><p>Maintain lighting systems, distribution boards, switches, sockets, and related equipment.</p></li><li><p>Repair plumbing fixtures, water supply systems, drainage systems, pumps, and sanitary installations.</p></li><li><p>Assist in maintaining HVAC systems, including split units, VRF systems, FCUs, AHUs, and ventilation systems.</p></li><li><p>Perform mechanical maintenance on pumps, motors, and rotating equipment.</p></li><li><p>Carry out furniture repairs and minor carpentry work.</p></li><li><p>Support maintenance of swimming pools, fountains, irrigation systems, gardens, and external facilities.</p></li><li><p>Respond promptly to emergency breakdowns and maintenance requests.</p></li><li><p>Maintain service reports, maintenance records, and spare parts inventories.</p></li><li><p>Coordinate with contractors and service providers.</p></li><li><p>Follow all HSE, security, and access-control procedures.</p></li><li><p>Maintain strict confidentiality regarding VVIP family activities and property information.</p></li></ul><p>Available Positions &amp; Requirements</p><p>AC Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Refrigeration &amp; Air-Conditioning Servicing (RAC) or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Strong knowledge of Chillers, AHUs, FCUs, CCUs, VRF Systems, and Central Plant Equipment</p></li><li><p>Experience in brazing, compressor replacement, HVAC troubleshooting, and preventive maintenance</p></li><li><p>Background in facilities management, commercial buildings, stadiums, or oil &amp; gas projects</p></li></ul><p>Electrician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical Installation &amp; Maintenance or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Knowledge of MCC Panels, DBs, SMDBs, UPS Systems, Generators, and LV Systems</p></li><li><p>Strong troubleshooting and preventive maintenance experience</p></li><li><p>Experience in industrial plants, stadiums, or facilities management environments</p></li></ul><p>Electronic Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electronics Products Assembly &amp; Servicing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CCTV, BMS, PA Systems, Access Control Systems, Sliding Gates, and ELV Systems</p></li><li><p>Strong troubleshooting skills</p></li></ul><p>Fire Alarm Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical/Electronics Technology or Fire Detection Systems or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with Addressable &amp; Conventional Fire Alarm Systems, FM-200, Deluge Systems, Foam Systems, Fire Fighting Control Panels, Access Control Systems, UPS, and DC Systems</p></li><li><p>Strong fault-finding and preventive maintenance experience</p></li></ul><p>Mechanical Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Mechanical Technology, Industrial Mechanics, or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CHW Pumps, Cooling Tower Gearboxes, Motors, Rotating Equipment, and Pump Alignment</p></li><li><p>Strong troubleshooting and preventive maintenance knowledge</p></li></ul><p>Plumber</p><p>Requirements:</p><ul><li><p>TESDA NC III in Plumbing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience in plumbing systems, sanitary installations, water supply networks, drainage systems, and PPR piping works</p></li><li><p>Strong troubleshooting, reporting, and documentation skills</p></li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><b>Requirements</b>- 1. Welding Procedure Specification (WPS), including welding current, voltage, wire feed speed, and travel speed. 2. Welding Position - operator has to know the welding positions 3. Blueprint Reads: Ability to read engineering prints and interpret welding symbols 4. Basic understanding of mechanical adjustments, torch alignments, and routine equipment maintenance 5. Safety and Material knowledge: Understanding of workplace safety standards (OSHA compliance) and handling Personal Protective Equipments (PPE)</p>

<p>Basic Job Responsibilities- Preparing DB Schedule &amp; Single Line Diagram with Voltage Drop Calculation Preparing Single Line Diagram for ELV System (Voice, Data, TV &amp; PA System) Preparing Shop Drawing, Revision Drawings &amp; As built Drawing Section of Electrical, HVAC &amp; Fire Fighting Equipment s for comfort application Prepare the Builders drawing &amp; Coordination Drawings Study proper calculations needed to produce effective legends Supporting &amp; Coordinating with tender department in taking Quantity for the MEP Drawings</p><p><strong>Desired Candidate Profile</strong></p><p>- Experience : Candidates must have a minimum of 4 years with design and drafting within the construction industry - Qualification : Diploma or Equivalent - Skills : Candidates should possess very good knowledge of AutoCAD.</p>

<p>Minimum 10–15 years of professional experience in construction, energy, infrastructure, power generation</p><p>or large-scale industrial projects.</p><ul><li><p>Minimum 5–7 years of direct site experience in renewable energy projects.</p></li><li><p>Proven experience supervising site works for utility-scale renewable energy projects, preferably above 200</p></li></ul><p>MW</p><ul><li><p>Strong experience managing EPC Contractors and multiple subcontractors in live construction</p></li></ul><p>environments.</p><ul><li><p>Experience in remote, desert, harsh-climate or logistically complex project sites is highly desirable.</p></li><li><p>.</p></li></ul><p>5.2 Technology-Specific Experience</p><p>Candidates should have strong practical site experience in at least one of the following technologies, with</p><p>preference for candidates experienced in all three:</p><p>Wind</p><ul><li><p>Onshore wind farm construction, including roads, access tracks, crane pads, WTG foundations and</p></li></ul><p>hardstands.</p><ul><li><p>Wind turbine component logistics, heavy transport, unloading, storage and lifting coordination.</p></li><li><p>WTG erection activities, including main crane coordination, mechanical completion and pre</p></li></ul><p>commissioning support.</p><ul><li><p>MV collection systems, inter-array cabling, fibre optics, earthing and substation interfaces.</p></li><li><p>Strong understanding of wind-related construction constraints, lifting windows and weather-dependent</p></li></ul><p>execution planning.</p><ul><li><p>Experience coordinating WTG OEM activities and Balance of Plant contractors.</p></li></ul><p>Solar PV</p><ul><li><p>Utility-scale PV site construction, including grading, piling, tracker installation, module installation and</p></li></ul><p>cabling.</p><ul><li><p>DC works, combiner boxes, string testing, inverter stations, MV stations, transformers and SCADA</p></li></ul><p>interfaces.</p><ul><li><p>Experience managing large PV installation fronts and high-volume manpower/productivity monitoring.</p></li><li><p>Understanding of PV quality issues, including module handling, torqueing, cable management, tracker</p></li></ul><p>alignment and punch list closure.</p><p>Renewable Energy Site Manager recruitment requirements</p><ul><li><p>Support to energization, capacity testing, performance testing and reliability run readiness.</p></li></ul><p>BESS</p><ul><li><p>Utility-scale BESS installation, including battery containers, PCS, transformers, MV switchgear and auxiliary</p></li></ul><p>systems.</p><ul><li><p>Coordination of BESS foundations, container placement, fire detection and suppression systems,</p></li></ul><p>communications and controls.</p><ul><li><p>Understanding of BESS safety requirements, restricted access, energization risks and emergency response</p></li></ul><p>coordination.</p><ul><li><p>Support to BMS, EMS, PCS, SCADA, functional testing, capacity testing and commissioning readiness.</p></li><li><p>Experience with hybrid renewable projects integrating PV, Wind and BESS is preferred.</p></li></ul><ol><li><p>Site Execution Competencies</p></li></ol><ul><li><p>Ability to read and understand construction drawings, IFC packages, method statements, inspection and</p></li></ul><p>test plans, and technical specifications.</p><ul><li><p>Strong knowledge of construction sequencing, access planning, logistics, site mobilization and work front</p></li></ul><p>management.</p><ul><li><p>Ability to monitor daily productivity, identify bottle necks, and drive corrective actions with contractors.</p></li><li><p>Experience in managing large site teams, multiple subcontractors and parallel work fronts.</p></li><li><p>Strong understanding of civil, electrical, mechanical and controls interfaces in renewable energy projects.</p></li><li><p>Practical understanding of mechanical completion, punch list closure, handover dossiers and</p></li></ul><p>commissioning readiness.</p><ul><li><p>Ability to enforce site discipline, permit-to-work requirements, method statement compliance and stop</p></li></ul><p>work authority where required.</p><ul><li><p>Strong site reporting discipline, including daily reports, progress updates, photographs, constraints logs</p></li></ul><p>and action trackers.</p><ol><li><p>HSE Requirements</p></li></ol><ul><li><p>Strong commitment to health, safety and environmental performance on large construction sites.</p></li><li><p>Proven experience enforcing HSE requirements for lifting operations, working at height, electrical works,</p></li></ul><p>excavation, heavy transport, hot works, confined spaces and energization activities.</p><ul><li><p>Ability to participate in or lead toolbox talks, safety walks, site inspections, incident reviews and corrective</p></li></ul><p>action follow-up.</p><ul><li><p>Understanding of permit-to-work systems, lock-out/tag-out, energization procedures, exclusion zones and</p></li></ul><p>emergency response plans.</p><ul><li><p>Ability to challenge unsafe practices and stop unsafe work when necessary.</p></li><li><p>Experience coordinating with HSE Managers and contractor HSE teams to improve site safety culture and</p></li></ul><p>compliance.</p><ol><li><p>Quality and enviromental Requirements</p></li></ol><ul><li><p>Experience monitoring site quality against approved ITPs, method statements, drawings and specifications.</p></li><li><p>Ability to coordinate inspections, witness points, hold points and acceptance of completed works.</p></li></ul><p>Renewable Energy Site Manager recruitment requirements</p><ul><li><p>Experience managing NCRs, site observations, punch lists and corrective action closure.</p></li><li><p>Understanding of quality risks in civil works, electrical installation, mechanical installation, cabling,</p></li></ul><p>earthing, module handling, WTG installation and BESS installation.</p><ul><li><p>Ability to verify that works are ready for inspection, mechanical completion and commissioning handover.</p></li><li><p>Strong attention to detail and ability to identify poor workmanship or non-compliant installation practices.</p></li><li><p>Knowledge of environmental issues.</p></li></ul><ol><li><p>Project Controls and Reporting</p></li></ol><ul><li><p>Prepare or contribute to daily, weekly and monthly site progress reports.</p></li><li><p>Track actual progress against baseline schedule and short-term look-ahead programmes.</p></li><li><p>Monitor manpower, equipment, material availability, construction productivity and work front readiness.</p></li><li><p>Maintain issue logs, constraints logs, interface registers, site action trackers and punch list status.</p></li><li><p>Support progress measurement, milestone verification and contractor payment assessment where</p></li></ul><p>required.</p><ul><li><p>Use project management tools such as Primavera P6, MS Project, Excel, Power BI or similar reporting</p></li></ul><p>platforms as applicable.</p><ul><li><p>Escalate delays, resource shortages, access constraints, quality issues, HSE concerns and interface</p></li></ul><p>conflicts in a timely manner.</p><ol><li><p>Contractual and Commercial Awareness</p></li></ol><ul><li><p>Understand site obligations under EPC contracts, technical specifications, HSE plans, quality plans and</p></li></ul><p>project procedures.</p><ul><li><p>Identify events that may lead to delays, claims, variations, disruption, rework or non-compliance.</p></li><li><p>Maintain accurate site records to support contractual positions, claims defence and change management.</p></li><li><p>Coordinate with the Project Manager, Contract Manager and Quantity Surveyor on site instructions,</p></li></ul><p>variations and contractor notices.</p><ul><li><p>Understand the importance of milestone dates, mechanical completion, commissioning, COD, liquidated</p></li></ul><p>damages and acceptance requirements.</p><ul><li><p>Avoid issuing informal instructions that may create unintended contractual or commercial exposure.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>If you have this experience apply here</p>

<p>Role &amp; responsibilities * Should have previously worked on Power Transmission / Substation Construction Projects involving GIS and OHL. * Must have hands-on experience in 132kV / 220kV / 400kV GIS and OHL projects. * Should have GCC regional / project experience in the execution of high-voltage transmission projects. * Should have a proven track record of handling large-scale projects from initiation to completion. * Overall responsibility for project execution, planning, controlling and monitoring of project activities. * Manage project schedules, resources, manpower, equipment and construction activities to ensure timely completion. * Monitor project progress, cost control, quality and HSE compliance as per project requirements. * Coordinate with clients, consultants, subcontractors and internal teams to ensure smooth project execution. * Handle client management, project coordination and resolution of technical and commercial issues. * Ensure project deliverables are completed within the approved budget, schedule and quality standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Qualification: Diploma / BE / B-Tech (Electrical Engineering)</li><li>Experience: 18+ Years</li><li>Project Experience: 132kV / 220kV / 400kV GIS + OHL</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Sultan's School in Oman is seeking to appoint an enthusiastic and experienced Male PE Teacher &amp; Sports Coordinator for January 2027. This is an exciting opportunity combining Secondary PE teaching with responsibility for coordinating and developing the school's competitive sports programme across Primary and Secondary. The successful candidate will teach approximately 16 PE periods per week alongside coordinating fixtures, tournaments, school teams and sporting events. The Role: Key responsibilities include: - Coordinating participation in the Muscat Primary and Secondary Sports Leagues - Organising fixtures, tournaments and the school sporting calendar - Supporting and developing school teams and sporting ECAs - Organising school sporting events and competitions - Developing opportunities for international sporting tours and tournaments - Promoting and celebrating student sporting achievement - Working closely with the Head of PE and colleagues to develop competitive sport across the school We are looking for an organised and energetic teacher with strong leadership and communication skills and a genuine passion for sport, student development and sportsmanship. Experience teaching IGCSE and/or IBDP sport-related courses would be an advantage. Package &amp; Benefits: - Competitive tax-free salary - Spacious on-campus housing provided free of charge - Annual flights - Education allowance for up to two children - International medical insurance and annual gratuity - Lunch provided - Free use of excellent facilities including gym, swimming pool and padel courts - Strong professional development and career progression opportunities About The Sultan's School: Edvectus is delighted to partner exclusively with The Sultan's School, a not-for-profit, high-performing IB World School founded in 1977. The school combines the English National Curriculum, Oman's Basic Education Programme and the IB Diploma Programme. Set across a beautiful 50-hectare park-like campus, The Sultan's School offers an exceptional community environment, outstanding facilities and a welcoming "family" atmosphere with exceptionally low staff turnover. Requirements: - A relevant Bachelor's degree and recognised teaching qualification - At least two years' post-qualification teaching experience - Secondary PE teaching experience - Ideally you will have some previous experience of coordinating or leading sport in your school - A commitment to safeguarding and the wider life of the school - Applicants must meet Oman visa requirements. All appointments are subject to appropriate safer recruitment checks. Please contact your Edvectus consultant for further information.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>The Scope of Work:&nbsp;</strong></span><span><strong>1. Document Preparation, Review, Finalization, and support services&nbsp;</strong></span><span><strong>1.1. Base Scope&nbsp;</strong></span><span><strong>A. The consultant should be responsible for supporting the Company in the&nbsp;</strong></span><span><strong>development, review, and finalization of offshore HSSE documents listed in&nbsp;</strong></span><span><strong>Annexure B.&nbsp;</strong></span><span><strong>B. The consultant shall coordinate with Company process owners to:&nbsp;</strong></span><span><strong>• Understand offshore operations, risks, and HSSE requirements&nbsp;</strong></span><span><strong>• Gather inputs for document development&nbsp;</strong></span><span><strong>• Participate in meetings and site visits as required (including Block 8 assets)&nbsp;</strong></span><span><strong>C. Documents shall include, but not be limited to:&nbsp;</strong></span><span><strong>• Procedures&nbsp;</strong></span><span><strong>• Standard Operating Procedures (SOPs)&nbsp;</strong></span><span><strong>• Guidelines and manuals relevant to offshore operations&nbsp;</strong></span><span><strong>D. All documents shall be prepared in the specific operational context of OQEP&nbsp;</strong></span><span><strong>offshore assets and aligned with the applicable offshore industry’s best&nbsp;</strong></span><span><strong>practices.&nbsp;</strong></span>&nbsp;</p><br> <strong>candidate should hold a degree in related field with minimum 15 years of experience in Oil&amp; Gas sector</strong><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Principal safety engineer</h4> <p>Minimum of 20 years total experience in engineering or consultancy of oil and gas facilities, including a minimum of 15 years’ experience in TSE in onshore oil and gas facilities with demonstrated TSE deliverables development and assurance experience (BP, Shell, PDO projects experience is mandatory).</p> <ul> <li>Track record of managing major oil and gas engineering projects as lead safety engineer (CAPEX > 100 million USD) spanning various project life cycle stages such as feasibility, concept, FEED, execute, project to asset transition.</li> <li>Demonstrated experience in development and assurance of:</li> <ul> <li>HSE philosophy, fire and gas philosophy, F & G cause and effects, F & G layouts, F & G mapping.</li> <li>FEA/FGDEA, flare radiation and dispersion studies, safety equipment layouts, input to facility layouts/facility siting and layout studies, EPZ calculation, QRA. Experience/conducted studies using Shell FRED, SHEPHERD software and/or other PEM/risk integration software. Formal certification preferred.</li> <li>Hazardous area classification, critical element identification, performance standards, bow ties.</li> <li>ALARP (as low as reasonably practicable), design HSE case, operations HSE case, AIPSM (asset integrity-process safety management) and HEMP (hazard and effect management process).</li> <li>Loss prevention aspects such as fire safety, fire protection design (FW demand, hydraulics, surge, PFDs/P & IDs, etc.), escape and fire fighting design.</li> <li>Human factors engineering studies experience (valve criticality, HFE screening, etc).</li> </ul> <li>Facilitated/led workshops for technical safety, which may include but not be limited to HAZID, HAZOP, bowties, ALARP demonstration, MOPO/SIMOPs workshop, SCE identification workshops, DEM1/DEM2/LFI screenings and demonstrations and other HEMP studies.</li> <li>Adequate involvement in safeguarding reviews such as design review, HAZOP, IPF, etc.</li> <li>Involvement in vendor documents evaluations (e.g. technical bid evaluation, datasheets/specifications/MR).</li> </ul> <p>Bachelor’s degree in chemical, mechanical or process safety engineering.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<ul><li>Leverage relevant technical knowledge and experience to contribute to the effective design, procurement and delivery of technical goods and services including Primary and Secondary electrical and instrumentation substation equipment and services.</li><li>Preventive and corrective maintenance, documentation, and maintenance management of bulk handling systems including truck unloaders, conveyor systems, stacker, mobile hoppers, and ship loader for pet coke and sulphur handling.</li><li>Develop and implement preventive, predictive and corrective maintenance plans for electrical and instrumentation systems.</li><li>Manage manpower, materials, and support automation and electrical systems such as Substation, PLCs, drives, instruments.</li><li>Maintain and update SAP based work orders, job plans and maintenance records.</li><li>Coordinate troubleshooting and root cause analysis for recurring issues on stackers, conveyors and ship loaders.</li><li>Handle operation, maintenance and troubleshooting for 11kv/440v substation with SCADA control.</li><li>Handle operation, maintenance and troubleshooting for F & G system, FACP & CACP systems.</li><li>Handle operation, maintenance, calibration & troubleshooting for field instruments, transmitters, flowmeters.</li><li>Handle operation, maintenance and troubleshooting for VFD, Siemens S7 series DCS/PLC systems.</li><li>Supervise maintenance teams during shutdowns, overhauls and emergency breakdowns.</li><li>Ensure adequate availability of spare parts, consumables and tools.</li><li>Provide comprehensive technical support to the E & I manager relevant to discipline.</li><li>Establish and maintain professional working relationship with all internal and external stakeholders for successful project delivery.</li><li>Actively contribute to planning, scoping and estimating for projects, bids and tenders.</li><li>Manage and control site documentation & safety related permit system.</li><li>Oversee day to day operation of bulk material handling systems for pet coke & sulphur.</li><li>Coordinate with operations control room and field teams to ensure smooth equipment performance.</li><li>Monitor system parameters throughput and equipment health to minimize downtime.</li><li>Ensure adherence to standard operating procedures (SOPs) and safety standards.</li><li>Ensure all operations and maintenance activities comply with Delta HSE policies and procedures.</li><li>Conduct safety risk assessments, toolbox talks and permit to work inspections.</li><li>Promote a culture of safety, housekeeping and environmental awareness among team members.</li><li>Monitor compliance to applicable industry standards, codes and regulatory requirements.</li><li>Propose ideas and take actions to improve team delivery and business needs.</li><li>Contribute to innovative and practical ways to meet business needs.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor of Engineering (Electrical and Electronics) with certified CEP/AEP.</li><li>Diploma in Electrical & Electronics/Instrumentation with certified CEP/AEP.</li><li>7 -10 years work experience in Port/ Plant / MEPF / Utility Maintenance.</li><li>10 -13 years work experience in Port/ Plant / MEPF / Utility Maintenance (Diploma holders).</li><li>Comprehensive knowledge of installation and operation of common Primary and Secondary electrical equipment and systems used in High Voltage Transmission or Distribution Substations.</li><li>Working understanding of project management principles.</li><li>Ability to prepare and maintain maintenance logs, calibration reports as per company and regulatory requirements.</li><li>Knowledge about fire and gas system.</li><li>Knowledge of requirements for effective scoping, sourcing, procuring and managing of suppliers and service providers.</li><li>Knowledge and understanding of applicable standards, codes and regulatory requirements.</li><li>Comprehensive knowledge of Work Health and Safety requirements.</li><li>Experience managing end to end procurement of technical goods and services with positive outcomes.</li><li>Hands-on experience with PLCs (Siemens, ABB), SCADA systems, and various industrial drives (WEG).</li><li>Experience in calibration, maintenance planning, and safety systems management.</li><li>Familiarity with communication protocols such as Profibus, Profinet, and Modbus.</li><li>Experience managing stackers, reclaimers, wagon loaders, silo and ship loader troubleshooting & maintenance.</li><li>Demonstrates learning agility and continuous improvement.</li><li>Commitment to positive Health & Safety culture.</li><li>Strong decision quality, balancing stakeholder needs, managing complexity.</li><li>Planning and prioritizing work.</li><li>Action oriented with urgency and enthusiasm.</li><li>Ensures accountability for self and others.</li><li>Effective communication and collaboration skills.</li><li>Ability to build networks and partnerships.</li><li>Instills trust through honesty, integrity, authenticity.</li><li>Manages ambiguity and situational adaptability.</li></ul>