فنى كابلات منخفض الفولت في سلطنة عمان

<p>Electrical Engineer Sales &amp; CEP Job Details Modern Explorer Company is looking for a motivated Omani Electrical Engineer to join our team in Salalah, Dhofar. The selected candidate will work primarily as an Electrical Sales Engineer while also supporting the company as a Competent Electrical Person (CEP) in accordance with applicable DCRP requirements and electrical safety procedures. The position combines technical knowledge, customer engagement, tendering, site coordination, and electrical safety responsibilities. The engineer will support the development of new electrical business opportunities and assist in the safe execution of electrical works across company projects.</p><h3>Key Responsibilities:</h3><ul><li>Develop and follow up sales opportunities for electrical projects, services, maintenance works, and related solutions.</li><li>Visit clients and project sites to understand technical requirements and identify business opportunities.</li><li>Prepare technical proposals, quotations, cost estimates, BOQs, and tender submissions in coordination with the company team.</li><li>Follow up submitted quotations and tenders with clients and support technical and commercial discussions.</li><li>Build and maintain professional relationships with clients, consultants, contractors, and relevant authorities.</li><li>Review electrical drawings, specifications, BOQs, and client requirements.</li><li>Provide technical support for LV/MV electrical systems, distribution systems, panels, cabling, protection, testing, and related works.</li><li>Perform CEP responsibilities subject to the candidate holding/obtaining the required DCRP competency/authorization and company appointment.</li><li>Support electrical isolation, safety documentation, permits, testing, and other activities within the candidate's approved competency level.</li><li>Ensure electrical activities comply with applicable safety requirements, client procedures, DCRP requirements, and company standards.</li><li>Coordinate with project engineers and site teams for inspections, testing, commissioning, documentation, and project handover.</li><li>Maintain sales enquiries, quotation follow-ups, client records, and periodic sales/project reports.</li><li>Support the company in developing new electrical business opportunities within Dhofar and other areas of Oman when required.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Qualifications &amp; Requirements:</h3><ul><li>Bachelor's Degree in Electrical Engineering Required.</li><li>Omani National.</li><li>Based in or willing to work in Salalah, Dhofar.</li><li>Minimum 3 years of relevant electrical engineering experience preferred.</li><li>Good knowledge of LV/MV electrical systems, electrical distribution, protection, and safe working practices.</li><li>Existing DCRP CEP competency/authorization is strongly preferred; candidates eligible and willing to complete the required DCRP competency process may also be considered.</li><li>Sales, estimation, tendering, or business-development experience in electrical/MEP projects is an advantage.</li><li>Good communication and customer-handling skills.</li><li>Ability to understand drawings, specifications, BOQs, and technical requirements.</li><li>Good command of Arabic and English.</li><li>Good computer skills, including Microsoft Office; AutoCAD knowledge is an advantage.</li><li>Valid Oman driving licence is preferred.</li><li>Willingness to attend client meetings, conduct site visits, and travel within Oman when required.</li></ul>

<p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office. Position is based in Musandam, Oman for a long-term assignment. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li><li>Certified Lead Auditor to any of the Management Systems ISO 9001 / ISO 14001 / OHSAS 18001.</li><li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li><li>Minimum Experience: Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry.</li><li>Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry.</li><li>Inspection and testing experience at manufacturing units and Construction sites required.</li><li>Multidiscipline Quality Control experience is preferred.</li><li>Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.</li><li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment.</li><li>Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li><li>Good Knowledge in the application of industry codes and standards</li></ul>

<p>Implement and maintain QA/QC procedures for electrical works in accordance with project specifications and quality standards. Prepare and review Inspection &amp; Test Plans (ITP), Method Statements, Checklists, and Quality Control Procedures. Conduct inspections of electrical installation and construction activities. Ensure electrical works comply with approved drawings, specifications, codes, and applicable standards. Inspect electrical equipment, materials, cable installations, termination, earthing, testing, and commissioning activities. Coordinate with site engineers, subcontractors, consultants, and client representatives for inspections and approvals. Prepare and maintain quality documentation, inspection reports, test reports, and project quality records. Identify quality issues, non-conformities, and deviations and coordinate corrective/preventive actions. Raise and close NCRs, observations, and punch points as required. Monitor material inspections and ensure materials conform to approved specifications. Participate in testing and commissioning inspections of electrical systems and equipment. Ensure proper implementation of ISO 9001:2015 quality management requirements. Support internal quality audits and maintain audit-related documentation. Monitor subcontractor quality performance and ensure compliance with project requirements. Coordinate with the project team to ensure timely completion of inspection and quality requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>BE/B.Tech in Electrical Engineering / EEE . Minimum 5+ years of relevant experience in Electrical QA/QC. ISO 9001:2015 Internal Auditor certification is required. Strong knowledge of electrical installation, inspection, testing, and commissioning. Good understanding of QA/QC procedures and documentation. Experience with ITP, Method Statements, NCR, MIR, WIR, inspection checklists, and quality reports . Knowledge of relevant electrical codes, standards, and project specifications. Substation / Switchyard project experience will be an added advantage. Strong communication, coordination, and documentation skills. Ability to work independently and coordinate effectively with site teams and clients.</p>

<ul><li><p>Develop and execute strategic sales plans to achieve company targets and expand customer base in the country</p></li><li><p>Actively promote and sell core portfolio of electrical and automation products including CHINT, Cumark, Xichi, and Fanox</p></li><li><p>Identify, prospect, and qualify new B2B leads through networking, cold calling, and industry research</p></li><li><p>Conduct technical sales presentations, product demonstrations, and consultations to address client-specific needs</p></li><li><p>Negotiate pricing, contract terms, and closing agreements while maximizing profitability</p></li><li><p>Maintain accurate sales forecasts, pipeline tracking, and client activity records</p></li><li><p>Monitor market trends, competitor activities, and industry developments to inform sales strategies</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>An Electrical Engineering degree is prefered but not required</p></li><li><p>Proven track record in B2B sales within industrial, electrical, or technical sectors</p></li><li><p>Familiarity with electrical power distribution components, industrial automation, and related systems such as LV products, VFDs, protection relays</p></li><li><p>Exceptional communication, negotiation, and interpersonal skills</p></li><li><p>Ability to translate complex technical concepts into clear business benefits</p></li><li><p>Self-motivated, results-oriented, capable of working independently and as part of a team</p></li></ul>

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<p><strong>Position Summary</strong></p><p>The Site Engineer will be responsible for the day-to-day execution, management, and supervision of potable water pipeline construction activities.&nbsp;</p><p>The successful candidate must demonstrate the ability to operate independently on-site, managing field resources, tracking daily progress, and overcoming construction challenges with minimal supervision.&nbsp;</p><p>This role requires seamless communication and reporting to the Project Manager to ensure project deliverables are achieved safely, on schedule, within scope, and in strict compliance with engineering specifications.</p><p><strong>Key Responsibilities</strong></p><p>Site Management &amp; Execution</p><ul><li>Supervise and drive the daily construction activities of potable water pipeline installations, including excavation, pipe laying, jointing, thrust block construction, backfilling, and compaction.</li><li>Manage onsite sub-contractors, laborers, plant machinery, and material resources individually to ensure efficient field workflows.</li><li>Conduct field inspections to verify that all work aligns with approved engineering drawings, method statements, and structural parameters.</li><li>Direct pressure testing, hydrotesting, flushing, and disinfection protocols for newly laid potable water pipelines before commissioning.</li></ul><p>Reporting &amp; Project Coordination</p><ul><li>Coordinate closely with the Project Manager to track project timelines, resource allocations, and budget milestones.</li><li>Generate and submit precise daily, weekly, and monthly site progress reports, documenting work completed, delays, equipment utilization, and labor hours.</li><li>Act as the primary onsite point of contact, resolving field issues independently while escalating complex variations or delays to the Project Manager immediately.</li><li>Liaise with client representatives, consultants, and local authorities during routine site inspections and quality sign-offs.</li></ul><p>Quality Assurance &amp; Safety Compliance</p><ul><li>Maintain strict quality control metrics over all incoming pipeline materials, ensuring proper handling and storage of pipes, valves, and fittings.</li><li>Implement and enforce all company Health, Safety, and Environment (HSE) policies onsite, targeting zero incidents.</li><li>Ensure accurate site surveying, alignment verification, and the preservation of levels as dictated by the design specifications.</li></ul><p><strong>Requirements &amp; Qualifications</strong></p><p>Experience &amp; Education</p><ul><li><strong>Minimum Experience:</strong> 5+ years of verified site engineering experience dedicated to pipeline infrastructure works, specifically focused on potable water transmission and distribution networks.</li><li><strong>Education:</strong> Bachelor’s Degree or Diploma in Civil Engineering, Mechanical Engineering, or a closely related construction discipline.</li><li><strong>Technical Knowledge:</strong> Deep familiarity with water pipeline materials (such as DI, HDPE, PVC, and Carbon Steel), jointing techniques, valve chambers, testing mechanisms, and standard utility standards.</li></ul><p>Key Competencies</p><ul><li><strong>Autonomy:</strong> Proven ability to manage a construction site individually, handle rapid decision-making under pressure, and drive productivity independently.</li><li><strong>Software Proficiency:</strong> Basic proficiency in AutoCAD for checking layout designs and MS Office (Excel, Word) for administrative reporting.</li><li><strong>Communication:</strong> Strong interpersonal and report-writing skills to build working relationships across sub-contractors and project executives.</li></ul><p>Preferred Assets (Added Advantage)</p><ul><li><strong>Driving License:</strong> Possession of a valid, active driving license is highly preferred and considered a significant advantage for field mobility across site segments.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211667&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Artificial Lift&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Opportunity: Technical Sales Expert</b></p><p><br></p><p><b>Location: Oman - Muscat</b></p><p><b>Job Type: Full-time</b></p><p><br></p><p><b>About Us</b></p><p>Alraed Technical Solutions is a premier provider of electrical engineering and industrial automation solutions in Oman. We specialize in delivering high-quality, reliable technical components to our clients, proudly importing and representing industry-leading brands including CHINT, Cumark, Xichi, and Fanox. As we continue to expand our market footprint, we are looking for a highly driven and experienced Sales Expert to join our team and accelerate our growth.</p><p><br></p><p><b>Role Overview</b></p><p>The Sales Expert will be responsible for driving revenue growth, identifying new business opportunities, and building lasting relationships with clients in the industrial and commercial sectors. The ideal candidate will combine strong sales acumen with a solid understanding of technical products to effectively communicate value propositions and provide tailored solutions to our customers.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Develop and execute strategic sales plans to achieve company targets and expand our customer base in the region.</li><li>Actively promote and sell our core portfolio of electrical and automation products (including CHINT, Cumark, Xichi, and Fanox).</li><li>Identify, prospect, and qualify new B2B leads through networking, cold calling, and industry research.</li><li>Conduct technical sales presentations, product demonstrations, and consultations to address client-specific needs.</li><li>Negotiate pricing, contract terms, and closing agreements while maximizing profitability.</li><li>Maintain accurate sales forecasts, pipeline tracking, and client activity records.</li><li>Monitor market trends, competitor activities, and industry developments to inform sales strategies.</li></ul><p><br></p><p><b>Qualifications &amp; Requirements</b></p><p><b>Experience</b>: Proven track record in B2B sales, specifically within the industrial, electrical, or technical sectors.</p><p><b>Education</b>: A Bachelor’s Degree in Electrical Engineering is preferred.</p><p><b>Technical Knowledge</b>: Familiarity with electrical power distribution components, industrial automation, and related systems (e.g., LV products, VFDs, protection relays).</p><p><b>Skills</b>: Exceptional communication, negotiation, and interpersonal skills. Ability to translate complex technical concepts into clear business benefits.</p><p><b>Drive</b>: Self-motivated, results-oriented, and capable of working independently as well as part of a team.</p><p><br></p><p><b>What We Offer</b></p><ul><li>Competitive salary with an attractive, performance-based commission structure.</li><li>Opportunity to work with an exclusive portfolio of globally recognized brands.</li><li>A dynamic, supportive, and growth-oriented work environment.</li><li>Opportunities for ongoing professional development and career advancement.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Exceptional communication, negotiation, and interpersonal skills. Ability to translate complex technical concepts into clear business benefits.</p></div>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities:</strong></p><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision.</li><li>Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li><strong>Wells custodianship</strong></li><li>Receiving all handovers from WS (hoist), sending handovers to construction for hook up.</li><li>Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity.</li><li>In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points.</li><li>Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li><strong>Other off plot activities:</strong></li><li>Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning.</li><li>Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations.</li><li>Implement and maintain HSE policies, procedures, and best practices.</li><li>Conduct regular safety audits, risk assessments, and emergency drills.</li><li>Promote safety awareness and lead incident investigations, providing corrective actions.</li><li>Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports).</li><li>Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Upstream</p><p>External: Contractors, Vendors &amp; Suppliers</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelors, 5-7 years</li><li>Diploma, &gt;7 years</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform Surface Operations</li><li>Off Plot Field Production Operation</li><li>Water Treatment</li></ul>

<p><h4>Job Description</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Principal Accountabilities Examines electrical equipment and systems for damages, corrosion and operation. Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes. Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems. Erects, repairs and services electrical power distribution systems and equipment. Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data. Tests required gauges and meters to assure accuracy and reliability. Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure. Analyzes malfunctions by inspection, observation of operation and use of test equipment. Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Interprets electrical drawings, schematics and blueprints. Conforms to USAF/Amentum safety, hazardous material and quality standards. Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives. Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies. Performs servicing and/or maintenance of in-use assets as required. Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies. Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo. Operates material handling equipment as required. Inspects Hazardous Materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required. Performs other tasks and duties as directed by Amentum/USAF tasking. May be required to assist in other departments when directed or requested to accomplish a specific task or project. Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking. Performs other duties as assigned. Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p><p>Preferred Qualifications Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred. Maximo experience is preferred but not required. Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have organizational skills and be able to understand, speak, read and write English at a beginner level. Must possess a valid home country driver's license and ability to obtain host nation driver's license. High School diploma or equivalent required. Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience. May be exposed to extreme noise from operating equipment. Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. Must be able to travel domestically and internationally.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Goodman Masson is partnering with a new financial markets infrastructure venture under formation in Oman.<br> Backed by prominent institutional investors, the business is building a greenfield platform from the ground up, and is now hiring at the build stage.<br> This is a rare chance to help stand up critical market infrastructure from a blank sheet and then run what you have built.<br> The role The Network and Security Engineer builds and looks after the network the platform runs on, and keeps it secure at the same time.<br> In the build phase you help design and then stand up the network from the ground up.<br> In the run phase you keep it working, watch it, and fix it when something breaks.<br> What you will do Help design and then build the network: segmentation and zoning, routing and switching, firewalls, load balancing, DNS, and time synchronisation, engineered for steady low-latency performance Set up and secure connectivity to external counterparties such as custodians, settlement banks, and market systems Own perimeter and internal network security in the first line: firewalls, segmentation, secure and privileged remote access, and certificate and encryption management Keep network devices patched and hardened, support penetration testing, and close network findings Lead the first response to network and security incidents, and escalate cleanly when needed Keep the network documented to a standard that holds up under review Location and terms Based in Muscat, Oman.<br> Permanent for Omani nationals; two-year fixed-term contract for expatriate hires.<br> Omani nationals are strongly encouraged to apply.<br> If this is your kind of build, please apply now!<br> What you will bring Degree in computer science, networking, information security, or a related field, or equivalent hands-on experience At least six years in network engineering, with direct hands-on responsibility for network security as well as the network itself Strong network design and operation: segmentation and zoning, routing and switching, firewalls, load balancing, secure remote access, and low-latency design Direct experience owning first-line network security including firewalls, hardening, certificates, and secure connectivity Experience securing external-facing connectivity in a regulated or high-assurance setting Experience leading the first response to a live network or security incident Hands-on credibility: able to configure a firewall and a switch, segment a network, read a packet capture, and challenge a vendor design Fluent English, written and spoken Also of interest Experience in financial services or financial market infrastructure such as a central securities depository, central counterparty, exchange, or payment system Experience with secure connectivity to SWIFT, Bloomberg, or the international central securities depositories Infrastructure-as-code and automation experience such as Terraform or Ansible Relevant certifications in networking such as CCNP or CCIE, and in security such as CISSP</span> </div>

<ul><li>Maintain accurate inventory of EV spare parts (battery components, controllers, inverters, motors, charging modules, wiring harnesses, etc.)</li><li>Monitor stock levels and reorder parts as required to prevent shortages or overstocking</li><li>Conduct regular stock audits and reconcile discrepancies</li><li>Ensure proper storage of sensitive EV components (especially lithium-ion battery parts)</li><li>Coordinate with OEMs and authorized suppliers for genuine EV parts</li><li>Raise purchase orders and track delivery schedules</li><li>Negotiate pricing and ensure cost-effective procurement where applicable</li><li>Assist service technicians in identifying correct parts using EPC (Electronic Parts Catalog)</li><li>Interpret part numbers, technical diagrams, and manufacturer manuals</li><li>Coordinate with service advisors to ensure parts availability for scheduled jobs</li><li>Attend to walk-in and workshop customers for parts inquiries</li><li>Provide accurate quotations and explain warranty coverage on EV components</li><li>Promote genuine parts and accessories to enhance vehicle performance and safety</li><li>Maintain records of inward/outward parts movement</li><li>Ensure warranty parts are processed as per OEM guidelines</li><li>Follow safety procedures for handling high-voltage EV components</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience with EV systems (battery packs, BMS, motor controllers, chargers)</li><li>Familiarity with inventory management software and MS Excel</li><li>Understanding of high-voltage safety standards in EVs</li><li>Experience with ERP/DMS systems</li><li>Ability to read technical drawings and parts catalogs</li><li>Strong organizational and communication skills</li><li>Customer service orientation</li><li>Attention to detail</li><li>Technical aptitude</li><li>Inventory planning & forecasting</li><li>Vendor coordination</li><li>Problem-solving ability</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a Control &amp; Automation Designer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. Position is based in Muscat, Oman. This role will be developing C&amp;A design drawings and documents and provide expertise in drawing systems.</p><p>Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Designing the future. Transforming the world</p><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors</li><li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li><li>Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p>Responsibilities</p><ul><li>Works closely with discipline project engineers/designers and other discipline engineers in the delivery of project engineering/construction deliverables, quality control drawings and overall project support.</li><li>Follow/ensure Quality Management System Requirements are met in line with ISO 9PHONE_NUMBER and API Q2 2nd edition requirements.</li><li>Develop designs in PDMS and (new) drawings in electronic format (AutoCAD).</li><li>Implement hand marked-up changes to drawings.</li><li>Maintain standard drawing templates.</li><li>Provides quality assurance reviews and detailed checking support.</li><li>Maintain and monitor drawing development progress.</li><li>Meet project commitments and deliver to schedule.</li><li>Identify &amp; implement process improvement to reduce cycle time &amp; cost.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum ITI or equivalent</p><p>Minimum 3 years in FEED/Engineering Experience and 6 years experience in the oil and gas industry with experience on major capital projects</p><p>Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) and AutoCAD.</p><p>Technical knowledge of advanced 3D design applications and processes.</p><p>Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)</p><p>Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines, specifically any API, CENELEC, IEC, IEC IP, IEEE, NEC, and NEMA standards.</p><p>Knowledgeable with designing industry related electrical and instrumentation deliverables (skids, equipment general arrangements, isometrics, plans, area classification drawings, single-lines, cable block diagrams, schematics, interconnect wiring diagrams)</p><p>Familiar with Electrical &amp; Instrumentation Data Handling Software, such as INTools, PowerGen, and any Programmable Logic Control or Digital Control System Software.</p><p>Is proficient in the use of human factors engineering guidelines and HSE best practices</p><p>Ability to work effectively in a team environment or independently with little guidance or supervision is required.</p><p>Knowledgeable of the interface points between design disciplines.</p><p>Is able to use Microsoft Word, Excel, Access, and PowerPoint.</p><p>Strong interpersonal and communications skills are highly desirable.</p><p></p></section>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>