Printing Engineer Jobs in Oman
355 Jobs Found
Save and set alert for similar positionsManage alerts
<ul><li><p>Follow the rules & regulations of the company</p></li><li><p>Take daily rounds of the entire plant, check and report any abnormalities</p></li><li><p>Understand the job clearly prior to starting the work and to ensure safety and quality of the work.</p></li><li><p>Utilize spares etc. in an effective way</p></li><li><p>Work as a team with other operation & maintenance sections & optimize various activities</p></li><li><p>Perform preventive, corrective and other maintenance programs as assigned in an effective manner & thus ensure timely completion of the work.</p></li><li><p>Prevent corrosion by cleaning and painting equipment.</p></li><li><p>Monitor and maintain all mechanical equipment in the best possible way;</p></li><li><p>Ensure cleanliness of the area, equipment & tools after completion of work</p><ul><li><p>Manage personal toolbox and personal protective equipment.</p></li></ul></li><li><p>Understand, adhere to, apply and carry out tasks and duties in accordance with QSE policies, rules and procedures </p></li><li><p>Report QHSE risks and impacts associated with its activities </p></li><li><p>On-call duty and work overtime when required</p></li><li><p>Any specific request from his manager and engineer has to be respected</p></li><li><p>Troubleshooting of equipment</p></li><li><p>Any other responsibility/work assigned by management </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Minimum experience: 5 years in Desalination plants</p></li><li><p>Experience in Preventive Maintenance (PM) and Corrective Maintenance (CM) covering pumps, compressors, Valves, gearboxes, mechanical seals, bearings, rotating equipment, and hydraulic & pneumatic systems...</p></li><li><p>Read and understand drawing, P&IDs, equipment manuals, maintenance procedures</p><ol><li><p>Good knowledge of occupational H&S procedures and LOTO, PTW, CMMS</p></li></ol></li></ol>
<ul><li><p>Follow the rules & regulations of the company</p></li><li><p>Take daily rounds of the entire plant, check and report any abnormalities</p></li><li><p>Understand the job clearly prior to starting the work and to ensure safety and quality of the work.</p></li><li><p>Utilize spares etc. in an effective way</p></li><li><p>Work as a team with other operation & maintenance sections & optimize various activities</p></li><li><p>Perform preventive, corrective and other maintenance programs as assigned in an effective manner & thus ensure timely completion of the work.</p></li><li><p>Prevent corrosion by cleaning and painting equipment.</p></li><li><p>Monitor and maintain all mechanical equipment in the best possible way;</p></li><li><p>Ensure cleanliness of the area, equipment & tools after completion of work</p><ul><li><p>Manage personal toolbox and personal protective equipment.</p></li></ul></li><li><p>Understand, adhere to, apply and carry out tasks and duties in accordance with QSE policies, rules and procedures </p></li><li><p>Report QHSE risks and impacts associated with its activities </p></li><li><p>On-call duty and work overtime when required</p></li><li><p>Any specific request from his manager and engineer has to be respected</p></li><li><p>Troubleshooting of equipment</p></li><li><p>Any other responsibility/work assigned by management </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Minimum experience: 5 years in Desalination plants</p></li><li><p>Experience in Preventive Maintenance (PM) and Corrective Maintenance (CM) covering pumps, compressors, Valves, gearboxes, mechanical seals, bearings, rotating equipment, and hydraulic & pneumatic systems...</p></li><li><p>Read and understand drawing, P&IDs, equipment manuals, maintenance procedures</p><ol><li><p>Good knowledge of occupational H&S procedures and LOTO, PTW, CMMS</p></li></ol></li></ol>
<p>Job Description</p><p>Chief Mechanic responsible of the Maintenance, repairs and installation of all associated mechanical equipment. This includes compressors, and other equipment. Change oil and filters and lubricate all vehicles maintenance and repair, Pumps, Motors, Engines and other mechanical.</p><p><br></p><p><br></p><p><br></p><p>Requirements</p><p>Role and Responsibilities:</p><p><br></p><p>Maintain and repair prime movers and other engines.</p><p>Maintain and repair two stage and four stage Gas/air compressor, heat exchangers and air dryers.</p><p>Replace regulators and all valves in air system.</p><p>Repair pneumatic pipe hoisting and handling equipment.</p><p>Assist other departments in equipment maintenance, repair or operation.</p><p>Work closely with other engineers, designers, and technicians to meet deadlines.</p><p>Assistant with project management on select projects.</p><p>Manage shop drawings and submittals.</p><p>Manage project issues and resolutions.</p><p>Provide feedback on standards and best practices.</p><p>Lead, mentor and support mechanical team.</p><p>Perform all engineering analysis required and develop quality design for projects.</p><p>Qualifications:</p><p><br></p><p>8-10+ years of experience in Mechanical Systems (HVAC & Plumbing).</p><p>Bachelor’s Degree in Engineering, Mechanical Engineering preferred. </p><p>Skills:</p><p><br></p><p>Skilled Revit and CADD user.</p><p>Understanding of current building codes & regulations.</p><p>Adept at prioritizing workload and proactively communicating in order to ensure deadlines are met.</p><p>Ability to apply technical expertise quickly.</p><p>Licensed Professional Engineer.</p><p>Expert level understanding of MEP drawings and specifications.</p><p>Extremely responsive and dedicated to meeting expectations.</p><p>Proven ability to work to tight deadlines in a team environment.</p><b><p></p></b><p><strong>Desired Candidate Profile</strong></p><p><br></p><ul><b><li> <p></p></li></b></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p><span>Chief
Mechanic responsible of the Maintenance, repairs and installation of all associated
mechanical equipment. This includes compressors, and other equipment. Change
oil and filters and lubricate all vehicles maintenance and repair, Pumps,
Motors, Engines and other mechanical. </span><br></p><br><br><span>Requirements</span><p><span><b>Role and Responsibilities:</b></span><br></p><br><ul><li><span><span>Maintain and repair prime movers and other
engines.</span><br></span></li><li><span><span>Maintain and repair two stage and four
stage Gas/air compressor, heat exchangers and air dryers.</span><br></span></li><li><span><span>Replace regulators and all valves in air
system.</span><br></span></li><li><span><span>Repair pneumatic pipe hoisting and handling
equipment.</span><br></span></li><li><span><span>Assist other departments in equipment
maintenance, repair or operation.</span><br></span></li><li><span><span>Work closely with other engineers,
designers, and technicians to meet deadlines.</span><br></span></li><li><span><span>Assistant with project management on select
projects.</span><br></span></li><li><span><span>Manage shop drawings and submittals.</span><br></span></li><li><span><span>Manage project issues and resolutions.</span><br></span></li><li><span><span>Provide feedback on standards and best
practices.</span><br></span></li><li><span><span>Lead, mentor and support mechanical team.</span><br></span></li><li><span><span>Perform all engineering analysis required
and develop quality design for projects.</span></span><br></li></ul><p><span><b>Qualifications:</b></span><br></p><br><ul><li><span><span>8-10+ years of experience in Mechanical
Systems (HVAC & Plumbing).</span><br></span></li><li><span><span>Bachelor’s Degree in Engineering, Mechanical
Engineering preferred.</span> </span><br></li></ul><p><span><b>Skills:</b></span><br></p><br><ul><li><span><span>Skilled Revit and CADD user.</span><br></span></li><li><span><span>Understanding of current building codes
& regulations.</span><br></span></li><li><span><span>Adept at prioritizing workload and
proactively communicating in order to ensure deadlines are met.</span><br></span></li><li><span><span>Ability to apply technical expertise
quickly.</span><br></span></li><li><span><span>Licensed Professional Engineer.</span><br></span></li><li><span><span>Expert level understanding of MEP drawings
and specifications.</span><br></span></li><li><span><span>Extremely responsive and dedicated to
meeting expectations.</span><br></span></li><li><span><span>Proven ability to work to tight deadlines
in a team environment.</span><br></span></li></ul><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are an industrial software company operating in the oil and gas sector in the GCC since 1992.</p><p>We provide high-end technology solutions to our clients worldwide. Some of our customers in the region are Aramco, Sabic, ADNOC, Nawah, PDO, Qatar Energy, Fertiglobe, Daleel, OQ8, EQuate, etc…</p><p><br></p><p>We are looking to hire a Full-Time Oman Engineer to join our technical team.</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>The following are the job requirements:</p><p><br></p><p>· Oman Nationality</p><p>· Bachelor’s degree in <b>ANY </b>of the following majors: Computer Engineering, Electrical Engineering, Computer Science, Computer Communication Engineering, Information Technology, Computer Science, or related field</p><p>· Driver's license</p><p>· Ability to drive to customers’ locations to provide support – when needed</p><p>· Critical thinking and problem-solving attitude</p><p>· Responsible, hard worker, committed, willing to learn and able to follow instructions</p><p>· Ensure the best possible performance, quality, and responsiveness to clients’ requests</p><p>· Client interface as needed for any of the following: software implementation or upgrade, problem resolution, enhancements, specialized reporting, training, etc.</p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Our client an award winning group of hotels in Cyprus are looking for an experienced Electrical Engineer to maintain the electrical systems in their hotels.<br> As the company marks several decades and continues to invest in exciting new projects, this is an opportunity to join a hospitality business known for high standards and a long-term commitment to excellence.<br> In this role, you will help support the smooth day-to-day running of premium hotel environments by ensuring essential electrical systems remain safe, reliable, and fully operational.<br> You will play an important part in maintaining the guest experience while working closely with colleagues across engineering and maintenance to support both routine operations and urgent needs.<br> Responsibilities Inspect, maintain, and repair hotel electrical systems and guest room equipment.<br> Respond promptly to electrical faults to minimize disruption to hotel operations.<br> Perform preventive maintenance on lighting, power distribution, and control panels.<br> Ensure all electrical work complies with safety standards and hotel procedures.<br> Coordinate with engineering and maintenance teams during renovations and urgent repairs.<br> Competitive salary as per market standards Degree or diploma in Electrical Engineering.<br> 3 to 5 years of experience maintaining electrical systems in a large hotel or similar commercial environment.<br> Strong troubleshooting skills for lighting, power distribution, and control systems.<br> Proficient in English.<br> Willingness to relocate and work in Cyprus if selected.<br></span> </div>
<p>Greeting From TQcert (Tata Projects) ! We Have Requirement With Our Reputed Client.</p><p>Position: Welding Engineers Location: Sohar - Oman Benefits: Salary + FAT + Other benefits.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or Diploma.</li><li>Professional certifications such as: AWS Certified Welding Inspector (CWI) (preferred) International Welding Engineer (IWE) (preferred) CSWIP 3.1/3.2 (advantageous)</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil & gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>
<p> <strong>Definition:</strong> </p>
<p>The Automotive Electronic Electrical Engineer is responsible for the embedded electronics technology of buses involving the electronic systems of the chassis and body. Ability to work in the development of projects for the electronic and pneumatic systems to produce the final product. Our goal as a Karwa Motors Engineering team is to develop and deliver a robust solution that guarantees the right quality, meets the demands and satisfies the customer's requirements. CUSTOMER SUCCESS IS OUR ESSENTIAL VALUE. We want to make a difference by being with our customers and offering uptime and reliable products.</p>
<p>Must have complete Higher Education Course (Electrical Engineering)</p>
<p> </p>
<p> <strong>Overall, Purpose of the Role:</strong> </p>
<p>Supports the Engineering Manager in the development and implementation of projects for the bus electronics systems on the assembly line, monitoring the flow and performance indices to identify opportunities for improvements and eliminate failures in achieving project results, quality and cost. Identify opportunities, create strategies and take effective measures to improve the results of the bus product. Work as a team and cooperate with the fulfillment of the organization's objectives, responding affectionately to the tasks assigned to their function, supporting the strategies proposed by the leaders, as well as establishing relationships based on respect, open communication and conflict management.</p>
<p>As an Automotive Electronic Electrical Engineer, you must work extensively in the establishment and maintenance of the process, promoting product requirements in accordance with ISO 9001: 2015 and ISO / TS 16949.</p>
<p>You must strive to continually improve the use of Lean tools in an engineering department, to reduce costs and improve product quality. Act independently at the organizational level. Results reviewed by the head of the organization. Decisions and results have an impact on the role and its success.</p>
<p> </p>
<p> <strong>Reporting To:</strong> </p>
<p>Engineering Manager</p>
<p> </p>
<p> <strong>Key Responsibilities:</strong> </p>
<p> <strong>GENERAL AND TASK MANAGEMENT:</strong> </p>
<p> Have operational responsibility for the pneumatic & wiring installation in the layout.</p>
<p> Drive the work from an operational perspective.</p>
<p> Have the capacity to work individually or with a small team actively to secure the deliverables.</p>
<p> Play an active role in the delivery.</p>
<p> Integrate deliveries from others and secure quality and readiness before release</p>
<p> Ensure the deliveries are made as per the requirement and timelines.</p>
<p> Frequent interactions with their counterparts, clarify the requirements and deliver accordingly.</p>
<p> Periodic updates about the jobs to the team leader and group manager.</p>
<p> Develops and implements pneumatic & wiring installation projects within the area of assignment including related routing and clipping solutions</p>
<p> Communicates relevant design and project requirements to external design counterpart as applicable if the detailed design is performed by an outside entity</p>
<p> Ensures design correctness and completeness for all pneumatic & wiring installation releases within the area of responsibility</p>
<p> </p>
<p> <strong>PEOPLE MANAGEMENT:</strong> </p>
<p> Supervise, monitoring and control resources effectively to support customer delivery requirements and Lean Manufacturing principles.</p>
<p> Monitor and maintain the Engineering Department's Absence Control Procedures to ensure the good level of service.</p>
<p> Dealing with personnel issues during the shift, including interaction with the Process, Purchasing, Quality and </p>
<p> </p>
<p> <strong>Skills and Attributes:</strong> </p>
<p> To seek innovation in the processes of design, assembly and manufacture of bodies, seeking continuous improvement and the achievement of results.</p>
<p> Proven work experience in engineering electrical system designs for bus bodies.</p>
<p> Good technical skills in electrical projects.</p>
<p> Know how to make decisions within your performance limit.</p>
<p> Practical knowledge of CAD software packages and 3D design engineering.</p>
<p> Familiarity with health and safety regulations.</p>
<p> Analytical thinker with interpersonal skills.</p>
<p> Ability to sustain and develop teamwork and team-based problem solving.</p>
<p> Can lead and motivate a team of people to success, using appropriate interpersonal styles, including leadership by example, setting goals and defining responsibilities to give a clear sense of direction.</p>
<p> Ability to build effective relationships with colleagues.</p>
<p> Ability to sustain and develop teamwork and team-based problem solving.</p>
<p> Able to achieve results by setting high standards and committing to clear goals.</p>
<p> Adaptable to changes and varied situations.</p>
<p> Ability to show resilience and a flexible approach.</p>
<p> Excellent communication skills.</p>
<p> Fluency in English, speaking Hindi will be an advantage.</p>
<p> </p>
<p> <strong>Qualifications and Experience Levels:</strong> </p>
<p> Minimum of 3 to 6 years of experience in automotive OEM in Electrical Projects Engineering. </p>
<p> Bachelor's or Diploma in Electrical Engineering</p>
<p> Full expertise in CAD or 3D software for electrical projects. </p>
<p> Significant work experience in a high-volume manufacturing environment, preferably in the bus industry.</p>
<p> Knowledge and understanding of Lean Manufacturing techniques.</p>
<p> </p>
<br><p> <strong>Job title</strong> </p>
<p>Lead Engneer Process - MAF </p>
<p> <strong>Grade</strong> </p>
<p> </p>
<p> <strong>Stream</strong> </p>
<p>RPI </p>
<p> <strong>Function</strong> </p>
<p>Assets Development- Process Engineering MAF </p>
<p> <strong>Location</strong> </p>
<p>Oman Muscat (MAF) </p>
<p> <strong>Budget control</strong> </p>
<p>*OPEX and/or CAPEX and/or Revenue amount as relevant*</p>
<p> <strong>Reporting to</strong> </p>
<p>TL MAF Process Engineering</p>
<p> <strong>Direct reports</strong> </p>
<p>0</p>
<p> <strong>Job purpose </strong> </p>
<p> <strong> </strong> </p>
<p>Lead Engineering Process at MAF (RPI) under TL MAF Process Engineering s scope, for the development, implementation and continuous improvement of process engineering-based activities acting as Senior Matter Expert of Process Optimization standards through: (1) Lead the identification, implementation and continuous improvement of process optimization-based activities at MAF refinery, (2) Analyses and prepares optimization proposals executing the corresponding engineering actions, task and activities related to opportunities of optimization (3) Lead and execute actions to ensure that Management process Services meets Management strategy, tactics and operational performance goals, (4) Provides focused technical/engineering support on specific operations and the corresponding engineering, maintenance and operational teams in MAF s plants, and (5) Guide young engineers in related matters; in order to ensure projects and service actions, tasks and targets are achieved efficiently and to optimum standards.</p>
<p> </p>
<p>The position will act in accordance with the Group s Mission, Vision, Values & Strategies, as well as, policies, guidelines, and standards, supported by IT Technology platform, HSE standards, Omani government & other legal justifications, and best international practices in consonance with national objectives.</p>
<p> <strong>Main tasks and responsibilities</strong> </p>
<p> <strong> </strong> </p>
<p> <strong>Accountabilities: </strong> </p>
<p> <strong> </strong> </p>
<p> </p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p>
<p> <strong>Process Engineering</strong> </p>
<p> <strong>MAF </strong> </p>
<p>Lead the Engineering processes and procedures implementation to assure that the team completes the technical assessments, recommendations, tasks, and activities as per objectives and ensures that the technical support requirements for all the Maintenance and operations assets are performed in a timely manner in order to minimise the down time.</p>
<p>Cooperates on contract management, interacting with the Vendors/ OEM management, coordination with Engineering/ TSD/ Inspection, FATs & SATs support, RCM Management, HAZOP, and other departments, </p>
<p>Provides input into the assigned budget for the department and advises on red flag budget over spend.</p>
<p>Identifies and execute opportunities to optimize operations within and across process units or equipment.</p>
<p>Supervises and verify design work performed by internal/ external engineering resources, which results in process optimization.</p>
<p>Prepare data for Heat and Material Balances, Process Flow Diagrams, designs minor plant modifications, and follows through to the project completion.</p>
<p>Review details of the refinery turn around process scope of work.</p>
<p>Analyses the documentation related to Scope of Work for MOC (Management of Change) requests raised for process improvement.</p>
<p>Performs Root Cause Analysis (RCA) and proposes corrective actions for performance improvement.</p>
<p>Participates in HAZOP studies for any modification of existing facilities/plants.</p>
<p>Gather preliminary documents for tender submissions.</p>
<p>Prepare technical procedures in line with modifications and new systems implemented.</p>
<p>Resolves issues that have a direct operational business impact, using problem-solving tools and techniques and balancing multiple considerations (e.g., economic, operating, maintenance, technical).</p>
<p>Analysis the design, analysis or findings of engineer s analyses data and identifies opportunities to optimize operations within and across process units or equipment.</p>
<p>Recommends improvements to department procedures so that all procedures are fulfilled while delivering a quality, cost effective service managing budget and quality control. </p>
<p>Support the plant turnaround scope preparation and process equipment inspection.</p>
<p>Carry out the new catalyst technical evaluation during the selection process and the performance test run.</p>
<p>Carry out the new chemical technical evaluation during the selection process and the performance test run.</p>
<p>Analyze the benchmarking study process results and propose improvement recommendations.</p>
<p>Coordinate with the relevant technology licensors and consultants to ensure their compliance with the committed technical service scope.</p>
<p>Analyze the long-term plant performance data and drive the debottlenecking studies.</p>
<p>Analyze the long-term plant performance data to improve the asset yields, energy efficiency and operating cost.</p>
<p><br></p>
<p> <strong>Education requirements</strong> </p>
<p>Minimum Qualifications for this position are <strong>bachelor s</strong> degree in engineering preferably in Chemical Engineering.</p>
<p> <strong>Language requirements </strong> </p>
<p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p>
<p> <strong>Background and experience</strong> </p>
<p> <strong>Competencies and skills</strong> </p>
<p>8-10 years of relevant experience</p>
<p>Relevant experience in similar role within the Oil & Gas / Refinery / Petrochemical industry, preferably with experience in the area/assets associated with this position. </p>
<p>5+ years of experience in Platforming Technology</p>
<p>Engineer role within the Oil & Gas / Refinery / Petrochemical industry. </p>
<p>Experience and well versed in field investigation, inspections, troubleshooting, performance checks, data </p>
<p> </p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Siemens Mobility (SMO) is the world’s leading provider of mobility solutions that enable the efficient, safe, and environmentally friendly transport of people and goods—helping to improve the quality of everyday life for millions worldwide. Motivated by innovation, we develop intelligent solutions for the growing digitalization of the transport sector. Our offerings include rail vehicles, rail automation, road traffic management systems, rail electrification, and services. In Oman, Siemens Mobility is delivering the signaling, telecom, and power supply systems for the 303 km Abu Dhabi-Sohar railway, which marks the first cross-country railway network in the Middle East, connecting the UAE and Oman. Today, we are recruiting for a Fresh Graduate Engineer to join our team in Oman. This is an excellent career opportunity for professionals looking to join a truly international team in one of the biggest projects of Siemens Mobility. What Are My Responsibilities? Assist senior engineers with installation, inspection, testing, and commissioning activities across assigned railway project activities. Support site surveys, inspections, measurements, and technical assessments as required. Assist with troubleshooting activities and support the identification and resolution of technical issues under the guidance of experienced engineers. Support the preparation, review, and maintenance of technical documentation, installation records, inspection reports, and project documentation. Read and interpret basic engineering drawings, technical specifications, and installation procedures. Follow approved project procedures, HSE requirements, safety regulations, and quality standards during all site activities. Coordinate with engineers, supervisors, technicians, and other project teams to complete assigned activities effectively and on schedule. Participate in site meetings, technical discussions, and project activities to gain practical knowledge of railway engineering and project execution. Apply engineering principles and develop practical knowledge of railway signalling and infrastructure systems under the guidance of senior engineers. What Do I Need to Qualify for This Job? Bachelor’s degree in Electrical Engineering or Mechanical Engineering . Fresh graduates or candidates with up to 1 year of professional experience are welcome to apply. Strong willingness to learn and develop technical and practical engineering skills. Basic knowledge of engineering drawings, technical documentation, and engineering principles . Good communication, teamwork, and interpersonal skills. Proactive approach with the ability to work effectively under the guidance of senior engineers and supervisors. Strong commitment to safety, quality, and compliance with project procedures. Ability and willingness to work on project sites and participate in installation, testing, and commissioning activities. Preferably based in or willing to relocate to Sohar or Al Buraimi, Oman . Fluent in written and spoken English . Career Development Opportunity Initial engagement as an Intern/Trainee Engineer , providing structured exposure to railway engineering and project execution. Opportunity to develop practical experience in engineering, installation, testing, commissioning, and troubleshooting activities. Potential transition to a permanent employment opportunity based on performance, technical capability, aptitude, and business requirements. What else do I need to know? This role provides an opportunity to gain practical experience in a major railway project while working alongside experienced engineers and multidisciplinary project teams. The position is site-based and may require travel between project locations in Oman. As a world leader in developing and producing the most advanced technologies, we improve lives and further human achievements worldwide, while also protecting the climate—all thanks to our employees. Working with us, you have the foundation to develop personally and professionally. We give you the chance to do something significant that benefits society and human progress. We give you the chance to create a difference. At Siemens we are always challenging ourselves to build a better future. We need the most innovative and diverse Digital Minds to develop tomorrow’s reality. Find out more about the Digital world of Siemens here: www.siemens.com/careers/digitalminds Diversity at Siemens is our source of creativity and innovation. Having different types of talent and experiences makes us more ambitious and better prepared to respond successfully to the demands of society. Therefore, we value candidates who reflect the diversity that we enjoy in our company. Please find more information at www.siemens.com . We are looking forward to receiving your online application. Please note: Only complete applications can be considered in the selection process.</span> </div>
<p>The Automation Engineer is responsible for ensuring the safe, reliable, and efficient operation of all automation, control, PLC, SCADA, communication, and industrial network systems supporting the container terminal. The role focuses on maintaining and improving the performance of semi-automated Ship-to-Shore (STS) cranes, Rubber-Tyred Gantry (RTG) cranes, and associated terminal automation systems to maximize equipment availability and operational efficiency. The Automation Engineer works closely with Maintenance, Operations, IT, OEMs, and contractors to troubleshoot automation issues, implement system improvements, and support digitalization and predictive maintenance initiatives.</p><p>KEY ACCOUNTABILITIES</p><p>Automation & Control Systems</p><ul><li>Maintain, troubleshoot, and optimize PLC, HMI, SCADA, and control systems for semi-automated STS and RTG cranes.</li><li>Perform software modifications, diagnostics, commissioning, and system testing.</li><li>Ensure all automation systems operate safely, reliably, and in accordance with OEM standards.</li></ul><p>PLC Programming & Industrial Control</p><ul><li>Develop, modify, troubleshoot, and maintain PLC programs using Siemens TIA Portal/STEP 7 and other OEM platforms.</li><li>Configure and maintain remote I/O, safety PLCs, VFDs, encoders, sensors, laser positioning, and motion control systems.</li><li>Perform software backups, version control, and restoration of PLC and automation programs.</li></ul><p>Automation Servers & OT Infrastructure</p><ul><li>Maintain the automation server infrastructure supporting crane operations, including application servers, engineering workstations, databases, and virtual environments.</li><li>Monitor server performance, system health, storage capacity, backups, redundancy, and disaster recovery.</li><li>Coordinate software updates, patches, and system upgrades with OEMs and the IT Department while minimizing operational disruption.</li></ul><p>Remote Operation & Communication Systems</p><ul><li>Maintain and troubleshoot communication between Liebherr Automation Servers, STS/RTG cranes, Remote Operator Stations (ROS), Engineering Workstations, and the Terminal Operating System (TOS).</li><li>Support and maintain the wireless/radio communication network used for remote operation of RTGs, ensuring reliable communication between the RTGs, ROS stations, and central automation servers.</li><li>Diagnose and resolve communication failures, latency, synchronization issues, and network interruptions affecting crane operation.</li></ul><p>Industrial Networks</p><ul><li>Maintain and troubleshoot industrial communication networks including Fiber Optic networks, Industrial Ethernet, Profinet, Profibus, Modbus TCP/IP, Ethernet/IP, managed switches, routers, wireless access points, and communication gateways.</li><li>Ensure high network availability, redundancy, cybersecurity, and reliable data exchange between automation devices.</li></ul><p>Camera & Vision Systems</p><ul><li>Maintain, configure, and troubleshoot all crane camera and vision systems, including spreader, trolley, boom, gantry, hoist, anti-collision, OCR, and CCTV cameras.</li><li>Ensure reliable video transmission, recording, and display at Remote Operator Stations.</li><li>Coordinate calibration, replacement, and commissioning of cameras and vision equipment.</li></ul><p>System Integration</p><ul><li>Support integration and communication between crane automation systems, PLCs, SCADA, ROS, TOS, CMMS, drive systems, anti-collision systems, positioning systems, and other terminal operational technologies.</li><li>Work closely with OEMs and IT to ensure seamless integration of new automation technologies and software upgrades.</li></ul><p>CMMS & Reliability</p><ul><li>Develop preventive maintenance plans for automation systems using the CMMS.</li><li>Record maintenance activities, software revisions, equipment history, and recurring failures.</li><li>Perform Root Cause Analysis (RCA) and implement corrective actions to improve equipment reliability and reduce downtime.</li></ul><p>Cybersecurity & Data Integrity</p><ul><li>Support OT cybersecurity by maintaining secure user access, backup procedures, antivirus protection, network segmentation, and disaster recovery plans.</li><li>Ensure automation software, PLC programs, and server configurations are securely backed up and protected against unauthorized access.</li></ul><p>Technical Support & Continuous Improvement</p><ul><li>Provide technical support during equipment breakdowns and commissioning activities.</li><li>Lead automation fault investigations and recommend system improvements to increase equipment availability and operational efficiency.</li><li>Evaluate new technologies and recommend automation enhancements that improve safety, reliability, and productivity.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in electrical engineering, Automation Engineering, Control Systems, Mechatronics, or a related discipline.</li><li>Professional certification in PLC programming, industrial automation, or control systems is preferred.</li><li>Minimum 5 years of experience in industrial automation or electrical control systems, preferably within a container terminal, port, or heavy industrial environment.</li><li>Proven experience with semi-automated STS and RTG cranes and OEM automation systems (e.g., Liebherr, Siemens, ABB, Konecranes, or ZPMC).</li><li>Hands-on experience with PLC, SCADA, HMI, VFDs, industrial networks, automation servers, Remote Operator Stations (ROS), radio communication systems, camera systems, and Terminal Operating System (TOS) integration.</li><li>Experience using CMMS/EAM systems (e.g., SAP PM, Maximo, Hexagon) for maintenance planning and asset management.</li><li>Strong troubleshooting, commissioning, Root Cause Analysis (RCA), and contractor/OEM coordination experience.</li></ul>
<p><h4>About us</h4>
<p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p>
<h4>Primary responsibility</h4>
<p>Lead a team(s) of materials corrosion engineers to carry out the materials activities to generate relevant deliverables on time, meeting QMS requirement according to client requirements.<br>
Able to handle efficiently multiple projects. Ensure design integrity and deliverables quality for all areas within a project with special emphasis on interfaces.<br>
Ability to develop CTR based on scope of work and provide input to finalize the project execution schedule.<br>
Manage work assignments, workload, work forecasting for assigned projects.<br>
Participate in HAZID, design reviews, HAZOPs, IPF classifications, HSE related workshops. Implement, practice, and monitor quality management system in assigned projects in line with ISO 9001.<br>
Ensure seamless handover of deliverables to project teams.<br>
Manage and control all interfaces of the related discipline with other disciplines and design product suppliers.<br>
Liaise with vendors, contractors, and other client personnel to satisfy the various aspects of the project.<br>
Preparation of requisitions and technical evaluation of subsequent bids for discipline material and equipment purchases and SACP and ICCP cathodic protection systems.<br>
Ensure designs are executed in line with international, client, and company specifications, standards, and procedures.<br>
Provide feedback on improvement to the applicable design standards.</p>
<h4>Specific requirement</h4>
<ul>
<li>Demonstrated experience in materials selection (concept, FEED, detailed design).</li>
<li>Demonstrated experience in corrosion analysis and implementing corrosion management programs.</li>
<li>Demonstrated experience in validation of corrosion control, IOW, corrosion loops and damage mechanisms.</li>
<li>Demonstrated experience in cathodic protection specification, design, and installation.</li>
<li>Demonstrated experience in conducting risk based inspection.</li>
<li>Demonstrated experience in painting and coatings specification.</li>
<li>Experience in all ranges of metallic and non-metallic materials.</li>
<li>Lead the material selection and corrosion control strategy for onshore oil and gas projects.</li>
<li>Conduct technical reviews of project specifications, designs, and engineering deliverables to ensure alignment with project requirements.</li>
<li>Identify, evaluate, and recommend materials suitable for various operating environments, considering factors like temperature, pressure, and corrosive media.</li>
<li>Develop and implement corrosion protection systems, including coatings, cathodic protection, and chemical treatment solutions.</li>
<li>Supervise and guide a multidisciplinary engineering team to meet project objectives and deadlines.</li>
<li>Coordinate with project stakeholders to ensure compliance with regulatory requirements and industry best practices.</li>
<li>Monitor project progress and ensure technical accuracy, cost control, and adherence to schedules.</li>
<li>Perform detailed failure analysis, risk assessments, and life-cycle evaluations for materials and equipment.</li>
<li>Prepare and deliver comprehensive technical reports, specifications, and presentations to internal and external stakeholders.</li>
<li>Provide expertise in corrosion monitoring techniques and ensure implementation during project phases.</li>
<li>Ensure all engineering activities comply with standards and quality assurance procedures.</li>
<li>Support internal and external audits and address any findings related to materials and corrosion management.</li>
<li>Train and mentor junior engineers to build technical capabilities within the team.</li>
</ul>
<h4>Education, qualification & experience</h4>
<p>Degree in relevant engineering subject (B.Sc., B.Eng., M.Sc.); chemical, mechanical, materials.<br>
Senior engineer / engineer shall have membership of an internationally accepted applicable professional body.<br>
Minimum 15 years of experience in oil & gas.<br>
Minimum 10 years of experience in engineering design (concept, FEED, detailed design & operations).<br>
Experience in the Middle East is preferred.</p>
<h4>Moving forward together</h4>
<p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br>
And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br>
And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>
<p><h4>Job Description</h4>
<p>A leading medical device company is actively recruiting a senior service engineer for their Oman office.</p>
<p>Applicants must have proven work experience in the country where the role is based. Candidates who have relocated within the last 12 months will not be considered.</p>
<p>Please note that you must meet all the criteria set out below for your application to be considered. Suitable candidates will be contacted within 5 working days. If you are not contacted by us within that time, please consider your application unsuccessful on this occasion.</p>
<h4>Main responsibilities include but are not limited to:</h4>
<ul>
<li>Install, maintain and troubleshoot medical equipment at customer sites.</li>
<li>Lead technical support activities across an assigned territory.</li>
<li>Resolve technical issues and customer complaints efficiently.</li>
<li>Support service revenue through service agreements, preventive maintenance and spare parts.</li>
<li>Coordinate installations, training and service resources.</li>
<li>Maintain technical documentation, tools and spare parts inventory.</li>
<li>Ensure equipment and tools are maintained and calibrated.</li>
<li>Mentor and support service engineers with technical repairs and maintenance.</li>
<li>Monitor service performance and support the achievement of service targets.</li>
</ul>
<h4>To be successful you will need to meet the following:</h4>
<ul>
<li>Omani nationals preferred.</li>
<li>Degree in biomedical, electronics, electrical, mechanical engineering, IT or a related field.</li>
<li>Minimum 5 years’ field service experience within medical devices, healthcare or life sciences.</li>
<li>Willingness to travel as needed for on-site customer support.</li>
<li>Driver’s license required.</li>
<li>Excellent Arabic and English is a must.</li>
<li>Applicants should be available for face-to-face interviews in the location mentioned above.</li>
</ul></p><p></p>
<p>Research and analyze client requirements to develop comprehensive proposals for UAV services, AI-based solutions, and IoT products. Collaborate with cross-functional teams, including sales, operations, and project management, to gather information and insights for proposal development. Create detailed and customized technical proposals, ensuring alignment with client needs and specifications. Develop and manage the tendering process, including reviewing and responding to RFPs (Request for Proposals), and RFQs (Request for Quotations), and RFIs (Request of Information). Prepare and deliver compelling presentations that effectively communicate technical solutions to clients and stakeholders. Stay informed about industry trends, advancements, and emerging technologies related to UAV systems and AI-based Solutions. Review and understand technical specifications, project requirements, and customer expectations. Engage in client meetings and presentations to articulate technical solutions and address inquiries. Collaborate with subject matter experts to gather technical data and incorporate it into proposal documents. Ensure proposals are submitted within specified deadlines, meeting all quality standards. Conduct sales visits on regular basis to ensure continues engagement with potential leads.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in engineering or relevant field.</li><li>Minimum Experience: 4 years of experience as Proposals / Sales Engineer.</li><li>In-depth knowledge of drone technologies, Excellent English written and verbal communication skills.</li><li>Ability to work collaboratively in a team environment.</li><li>Proficient in Microsoft Office Suite and proposal management tools.</li><li>Exceptional organizational and time-management skills.</li><li>Ability to thrive in a dynamic and fast-paced work environment.</li><li>Knowledge of drones and AI technologies is a plus.</li></ul>
<p>We are seeking a skilled and detail-oriented QA QC Engineer with experience in heat exchanger manufacturing & Service devision . The ideal candidate will ensure that our products meet the highest quality standards by conducting thorough inspections, testing, and adherence to specifications.</p><ul><li><p>To be able to study drawings, prepare ITP and quality plans, procedures like hydrotest ,expansion ,stage wise inspection, NDT and NDE.</p></li><li><p>Preparation NDE ,PWHT requests</p></li><li><p>Incoming materials inspection and preparation of MIR and review of Test certificates as per TDC and PO.</p></li><li><p>Must be proven himself to manage TPI, Customer inspection as per quality plans. control the activities as sub-contractors for quality requirements. Internal inspections prior to TPI visit.</p></li><li><p>Preparation of material traceability records and prepare test certificates.</p></li><li><p>Shall be worked with U stamp companies.</p></li><li><p>Monitor welders and welding processes with respect to WPS and welder qualification. Monitor weld quality as per design and drawing.</p></li><li><p>Review of drawings and Material specifications.</p></li><li><p>Preparation of in process and final documentation.</p></li><li><p>Safe keeping of all inspection reports.</p></li><li><p>Review of calibration records and calibration of equipment. Coordinate with production foreman for day-to-day inspection activities</p></li><li><p>Monitor and record success/failures during inspections (Fit-ups, NDE, Hydro)</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience of checking MTC and sub-contractors’ procedures. Shall be fully aware and experience to handle ASME Sec VIII, II, V and IX .U Stamp R Stamp</li><li>Desired candidate shall have excellent experience in the field of shell and tube heat exchanger, pressure vessel, ACHE manufacturer.</li><li>Qualification- B Tech, BE Mechanical</li><li>Excellent experience in welding processes and inspections</li></ul>
<p>The role will provide specialist geotechnical expertise for marine and coastal developments such as reclamation works, breakwaters, quay walls, ports, harbors, jetties and related structures in Oman. Responsibilities include field investigations, analytical design, construction support and close coordination with multidisciplinary project teams to ensure safe, cost effective delivery of complex maritime infrastructure.</p> <ul> <li>Plan and execute marine and coastal site investigations (boreholes, CPT, sampling, in situ testing).</li> <li>Perform geotechnical analyses and design for reclamation, breakwaters, quay walls, ports, jetties and associated structures.</li> <li>Prepare detailed geotechnical reports, design calculations, and technical specifications.</li> <li>Review and comment on design packages submitted by consultants and internal teams.</li> <li>Provide on site construction support, including monitoring, troubleshooting and design modifications.</li> <li>Coordinate with structural, hydraulic, environmental and other discipline engineers to integrate geotechnical solutions.</li> <li>Ensure compliance with Omani regulations, international codes and WSP quality standards.</li> <li>Maintain and manage geotechnical data, databases and project documentation.</li> <li>Mentor junior engineers and contribute to knowledge sharing within the team.</li> <li>Assist in business development activities, proposal preparation and client presentations.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>BSc/MSc in Civil or Geotechnical Engineering.</li> <li>Minimum 10 years of experience in marine/coastal geotechnical engineering.</li> <li>Proven track record on reclamation, breakwater, port and harbor projects.</li> <li>Proficiency with geotechnical software (e.g., Plaxis, GeoStudio, FLAC).</li> <li>Knowledge of Omani and international geotechnical design codes and standards.</li> <li>Strong technical report writing and presentation skills.</li> <li>Ability to work effectively in multidisciplinary project teams.</li> <li>Fluent English (Arabic language skills are a plus).</li> <li>Willingness to travel to project sites in Oman as required.</li> <li>Professional Engineer registration (PE, UAE, Oman) preferred.</li> </ul>
<p>The Senior Well Engineer is responsible and accountable for the operational performance, regulatory compliance, and safe delivery of multiple well operations achieved through the leadership of a multi-disciplined drilling, completions, and work-over team. The position supports single or multi-rig operations to deliver wells within the planned time, cost, and HSE targets by using optimum technology and best industry practices without compromising established company policies and HSE standards. The role drives the implementation of all lessons learned from offset wells, contributes to performance analysis and improvement, target setting, and benchmarking.</p><h3>Core Well Engineering Skills</h3><ul><li>Well Engineering Operations Planning and Execution</li><li>Casing Design planning and execution</li><li>Drill String Design and Directional Plan programming and execution</li><li>Well Control Equipment and Executing Well Control Operations</li><li>Drilling Fluid and Cementing Design planning and execution</li><li>Selection and management of Drilling and Completion Units and Equipment</li><li>Completion and intervention planning and execution</li></ul><h3>Essential Job Functions & Responsibilities</h3><h4>People Leadership & Team Management</h4><ul><li>Line Management: Act as the direct line manager for Well Engineers, who will report directly to this position.</li><li>Talent Development: Motivate, coach, mentor and develop well engineers within the operational team.</li></ul><h4>Operational & Performance Management</h4><ul><li>Rig Support: Provide office-based technical support to the Well Engineer Manager to effectively manage rig/hoist operations.</li><li>Continuous Improvement: Embed the 'Drilling technical Limit' concept (DWOP - Drill Well on Paper, AAR - After Action Reviews, BPR - Business Performance Reviews) and performance management in each activity to drive a learning organization.</li><li>Rig Site Collaboration: Provide real-time support and technical information to the rig-site Drilling Supervisor on all matters related to drilling, completion, work-over, and abandonment operations.</li><li>Cost & Efficiency: Monitor work delivered and associated costs. Ensuring that the most cost-effective techniques and equipment are applied on site.</li><li>Technical Standardization: Standardize all drilling/CWI assemblies, hydraulics, and drilling parameters; lead trial initiatives (including new drill bit trials) with clear performance metrics and structured feedback loops.</li><li>Reporting: Create all necessary technical reports to support operations and ensure timely lookaheads for personnel, equipment, and services.</li></ul><h4>Delivery & Design Accountability</h4><ul><li>Budgetary Target: Ensure all well objectives are achieved within agreed program time constraints and budget.</li><li>KPI: Maintain actual vs. planned cost.</li><li>Lifecycle Integrity: Ensure robust well designs that account for all relevant load cases over the entire well lifecycle.</li><li>Equipment Specification: Manage the definition and technical specification of all well drilling equipment.</li><li>Program Schedule: Accountable for timely program delivery to run the rig(s).</li><li>KPI: Full well program delivered 4 weeks before spud; sub-programs (Completions, Logging, etc.) issued 2 weeks before commencement.</li><li>Change Management: Support operational changes or rescheduling under a proper Management of Change (MOC) process to ensure well objectives are met.</li></ul><h4>Compliance, HSSE & Process Safety</h4><ul><li>Process Safety: Ensure Wells Process Safety principles are thoroughly implemented, identified, and strictly assured.</li><li>HSSE: Serve as the focal point for HSSE management with contractors and execute systematic evaluations of service quality.</li></ul><h4>Contractor & Stakeholder Management</h4><ul><li>Contract Quality Control: Maintain and control the availability, quality, and performance of services and equipment provided under the various service contracts.</li><li>Contract Holder Duties: Support contract management as a Contract Holder in select cases, participating actively as a member of the contract management team.</li><li>Contract Drafting: Assist in developing detailed contracts that clearly prescribe technical expectations and contractor deliverables.</li><li>Contractor Relations: Manage contractor services in line with the contracting strategy; lead structured performance, planning, and deviation discussions.</li><li>Cross-functional Alignment: Support and foster collaborative relationships with subsurface, production, facilities, operations, and construction teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Requirements</h3><ul><li>Education: Bacheloru2019s Engineering degree, or equivalent technical discipline.</li><li>Experience: At least 10 years, preferably 15+ years, of relevant experience in E&P in well engineering with deep knowledge of well planning, well design, well programming, and well construction including completions.</li><li>Regional Exposure: Preferred exposure and experience with Drilling and CWI (Completions & Well Interventions) activities in Oman.</li><li>Technical Forecast: Proven ability and willingness to avoid potential difficulties by predicting and understanding downhole conditions and applying appropriate preventive techniques.</li><li>Certifications: Valid IWCF certificate (Supervisor/Level 4 Surface Stack).</li><li>Deep Drilling: Must possess robust experience in deep drilling environments.</li><li>Design Capabilities: Comprehensive experience in casing & tubing design, cement design, fluids/mud programmes, BHA designs, and hydraulics optimization to suit Well Construction & CWI programs.</li><li>Software & Systems: Fully conversant with Well Planning software, directional drilling, and horizontal well operations with proven leadership capabilities in onshore oilfield operations.</li><li>Commercial Acumen: experience in Contract Management acting in the role of Contract Holder or Deputy Contract Holder.</li><li>Methodology: Possesses a continuous improvement and simplification mindset, with practical knowledge of Agile ways of working.</li><li>Communication: Excellent oral and written Technical English communication skills.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p><span>The Senior Well Engineer is responsible and accountable for the
operational performance, regulatory compliance, and safe delivery of multiple
well operations achieved through the leadership of a multi-disciplined
drilling, completions, and work-over team. The position supports single or
multi-rig operations to deliver wells within the planned time, cost, and HSE
targets by using optimum technology and best industry practices without
compromising established company policies and HSE standards. The role drives
the implementation of all lessons learned from offset wells, contributes to
performance analysis and improvement, target setting, and benchmarking.</span><br></p><br><br><span>Requirements</span><p><span><b>Experience & Qualifications
Requirements</b></span><br></p><br><ul><li><span><span><b>Education:</b> Bachelor’s Engineering degree,
or equivalent technical discipline.</span><br></span></li><li><span><span><b>Experience:</b> At least 10 years, preferably
15+ years, of relevant experience in E&P in well engineering with deep
knowledge of well planning, well design, well programming, and well
construction including completions.</span><br></span></li><li><span><span><b>Regional Exposure:</b> Preferred exposure and
experience with Drilling and CWI (Completions & Well Interventions)
activities in Oman.</span><br></span></li><li><span><span><b>Technical Forecast:</b> Proven ability and
willingness to avoid potential difficulties by predicting and understanding
downhole conditions and applying appropriate preventive techniques.</span><br></span></li><li><span><span><b>Certifications:</b> Valid IWCF certificate
(Supervisor/Level 4 Surface Stack).</span><br></span></li><li><span><span><b>Deep Drilling:</b> Must possess robust
experience in deep drilling environments.</span><br></span></li><li><span><span><b>Design Capabilities:</b> Comprehensive
experience in casing & tubing design, cement design, fluids/mud programmes,
BHA designs, and hydraulics optimization to suit Well Construction & CWI
programs.</span><br></span></li><li><span><span><b>Software & Systems:</b> Fully conversant
with Well Planning software, directional drilling, and horizontal well
operations with proven leadership capabilities in onshore oilfield operations.</span><br></span></li><li><span><span><b>Commercial Acumen:</b> experience in Contract
Management acting in the role of Contract Holder or Deputy Contract Holder.</span><br></span></li><li><span><span><b>Methodology:</b> Possesses a continuous
improvement and simplification mindset, with practical knowledge of Agile ways
of working.</span><br></span></li><li><span><span><b>Communication:</b> Excellent oral and written
Technical English communication skills.</span><br></span></li></ul><p><span><b>Core Well Engineering Skills</b></span><br></p><br><ul><li><span><span>Well Engineering Operations Planning and
Execution</span><br></span></li><li><span><span>Casing Design planning and execution</span><br></span></li><li><span><span>Drill String Design and Directional Plan
programming and execution</span><br></span></li><li><span><span>Well Control Equipment and Executing Well
Control Operations</span><br></span></li><li><span><span>Drilling Fluid and Cementing Design
planning and execution</span><br></span></li><li><span><span>Selection and management of Drilling and
Completion Units and Equipment</span><br></span></li><li><span><span>Completion and intervention planning and
execution</span><br></span></li></ul><p><span><b>Essential Job Functions &
Responsibilities</b></span><br></p><br><p><span><i>People Leadership & Team Management</i></span><br></p><br><ul><li><span><span>Line Management: Act as the direct line
manager for Well Engineers, who will report directly to this position.</span><br></span></li><li><span><span>Talent Development: Motivate, coach, mentor
and develop well engineers within the operational team.</span><br></span></li></ul><p><span><b>Operational & Performance Management</b></span><br></p><br><ul><li><span><span><b>Rig Support: </b>Provide office-based technical
support to the Well Engineer Manager to effectively manage rig/hoist
operations.</span><br></span></li><li><span><span><b>Continuous Improvement:</b> Embed the 'Drilling
technical Limit' concept (DWOP - Drill Well on Paper, AAR - After Action
Reviews, BPR - Business Performance Reviews) and performance management in each
activity to drive a learning organization.</span><br></span></li><li><span><span><b>Rig Site Collaboration:</b> Provide real-time
support and technical information to the rig-site Drilling Supervisor on all
matters related to drilling, completion, work-over, and abandonment operations.</span><br></span></li><li><span><span><b>Cost & Efficiency:</b> Monitor work
delivered and associated costs. Ensuring that the most cost-effective
techniques and equipment are applied on site.</span><br></span></li><li><span><span><b>Technical Standardization:</b> Standardize all
drilling/CWI assemblies, hydraulics, and drilling parameters; lead trial
initiatives (including new drill bit trials) with clear performance metrics and
structured feedback loops.</span><br></span></li><li><span><span><b>Reporting: </b>Create all necessary technical
reports to support operations and ensure timely lookaheads for personnel,
equipment, and services.</span><br></span></li></ul><p><span><b>Delivery & Design Accountability</b></span><br></p><br><ul><li><span><span><b>Budgetary Target:</b> Ensure all well
objectives are achieved within agreed program time constraints and budget. KPI:
Maintain actual vs. planned cost.</span><br></span></li><li><span><span><b>Lifecycle Integrity: </b>Ensure robust well
designs that account for all relevant load cases over the entire well
lifecycle.</span><br></span></li><li><span><span><b>Equipment Specification:</b> Manage the
definition and technical specification of all well drilling equipment.</span><br></span></li><li><span><span><b>Program Schedule:</b> Accountable for timely
program delivery to run the rig(s). KPI: Full well program delivered 4 weeks
before spud; sub-programs (Completions, Logging, etc.) issued 2 weeks before
commencement.</span><br></span></li><li><span><span><b>Change Management:</b> Support operational
changes or rescheduling under a proper Management of Change (MOC) process to ensure
well objectives are met.</span><br></span></li></ul><p><span><b>Compliance, HSSE & Process Safety</b></span><br></p><br><ul><li><span><span><b>Process Safety:</b> Ensure Wells Process Safety
principles are thoroughly implemented, identified, and strictly assured.</span><br></span></li><li><span><span><b>HSSE: </b>Serve as the focal point for HSSE
management with contractors and execute systematic evaluations of service
quality.</span><br></span></li></ul><p><span><b>Contractor & Stakeholder Management</b></span><br></p><br><ul><li><span><span><b>Contract Quality Control:</b> Maintain and
control the availability, quality, and performance of services and equipment
provided under the various service contracts.</span><br></span></li><li><span><span><b>Contract Holder Duties:</b> Support contract
management as a Contract Holder in select cases, participating actively as a
member of the contract management team.</span><br></span></li><li><span><span><b>Contract Drafting:</b> Assist in developing
detailed contracts that clearly prescribe technical expectations and contractor
deliverables.</span><br></span></li><li><span><span><b>Contractor Relations:</b> Manage contractor
services in line with the contracting strategy; lead structured performance,
planning, and deviation discussions.</span><br></span></li><li><span><span><b>Cross-functional Alignment:</b> Support and
foster collaborative relationships with subsurface, production, facilities,
operations, and construction teams.</span><br></span></li></ul><br> </div>
<p>Job Purpose</p>
<p>(The primary reasons for which the job exists in the company)</p>
<p> Lead and supervise all plant operations during the assigned shift.</p>
<p> Ensure the safe, reliable, and efficient operation of the facility in compliance with HSE policies and operating procedures.</p>
<p> Optimize plant performance, availability, and reliability while meeting production targets.</p>
<p> Coordinate operational and maintenance activities to ensure safe and effective execution of work.</p>
<p> Make timely operational decisions and respond effectively to abnormal and emergency situations.</p>
<p> Manage and develop shift personnel by providing leadership, guidance, and technical support.</p>
<p> Ensure accurate and comprehensive shift handovers, including the communication of plant status, ongoing work, operational risks, and outstanding actions to the incoming shift.</p>
<p> Ensure compliance with statutory, environmental, and company requirements while achieving the objectives of the Operations Department.</p>
<p> </p>
<p>Description Key Result Areas</p>
<p>Description</p>
<p> </p>
<p>Safety at Work</p>
<p> Has overall responsibility for the safe, reliable, and efficient operation of the plant during the assigned shift.</p>
<p> Demonstrates leadership in Health, Safety, and Environment (HSE) by promoting safety as a core value and ensuring compliance with all HSE policies, procedures, and statutory requirements.</p>
<p> Ensures plant operations are conducted in accordance with approved operating procedures, safety rules, and operational limits.</p>
<p> Leads the shift team in responding effectively to normal, abnormal, and emergency operating conditions, including plant trips, blackouts, and black-start activities where applicable.</p>
<p> Coordinates operational and maintenance activities to ensure work is performed safely, efficiently, and in compliance with the Permit-to-Work (PTW) system.</p>
<p> Reviews, authorizes, and ensures proper equipment isolations, lockout/tagout requirements, and safety precautions before issuing or accepting permits for maintenance activities.</p>
<p> Ensures operational targets and contractual performance requirements are achieved while maintaining plant availability, reliability, and efficiency.</p>
<p> Conducts regular plant inspections and safety observations to identify hazards, verify equipment condition, and ensure compliance with operational standards.</p>
<p> Ensures timely reporting, investigation, and follow-up of safety incidents, near misses, equipment failures, and operational abnormalities, including implementation of corrective and preventive actions.</p>
<p> Maintains accurate operational records, shift logs, and reports, ensuring effective communication during shift handovers and with plant management.</p>
<p> Adheres to the Crisis Management Plan and leads the shift team in implementing emergency response procedures when required.</p>
<p> Maintains the confidentiality of operational, technical, and commercial information related to the facility.</p>
<p> </p>
<p>Team Leadership</p>
<p> Leads the Operations Team to achieve a high level of performance, efficiency, and operational excellence.</p>
<p> Builds and sustains a committed, cohesive, and high-performing team through effective leadership and collaboration.</p>
<p> Acts as a mentor and coach, providing guidance and technical support to team members.</p>
<p> Leads by example by demonstrating professionalism, accountability, and adherence to company values and standards.</p>
<p> Identifies and recommends appropriate training and development programs to enhance the competency of the Operations Team.</p>
<p> Plans, prepares, and delivers operations-related training, coaching, and knowledge-sharing sessions to support continuous improvement and workforce development.</p>
<p> </p>
<p>PROBLEM SOLVING:</p>
<p> The Shift-in-Charge Engineer is responsible for resolving technical and operational problems through a thorough understanding of plant processes and systems.</p>
<p> Utilizes control system data, historical trends, operational experience, and engineering principles to troubleshoot equipment and process abnormalities.</p>
<p> Conducts or facilitates Root Cause Failure Analysis (RCFA) to identify the underlying causes of incidents and equipment failures and implements appropriate corrective and preventive actions.</p>
<p> Ensures that lessons learned, findings, and recommended actions are effectively communicated to shift personnel and other operating teams to prevent recurrence and promote continuous improvement.</p>
<p> </p>
<p>JOB CONTEXT:</p>
<p>The Shift-in-Charge Engineer is responsible for, but not limited to, the following duties:</p>
<p> Works at Manah Power Plant from the Central Control Room under the supervision of the Operations Superintendent and conducts regular plant rounds as required to effectively perform assigned duties.</p>
<p> Leads and supervises shift personnel to ensure the plant is operated safely, efficiently, and within all environmental, technical, and contractual requirements.</p>
<p> Ensures comprehensive and accurate shift handovers by communicating plant status, ongoing activities, operational risks, and outstanding actions to the incoming shift.</p>
<p> Prepares, reviews, and submits all required operational reports, including but not limited to:</p>
<p>o Spot Market Reports</p>
<p>o Daily Operating Readings Reports</p>
<p>o Night Log and Shift Summary Reports</p>
<p>o Trip and Outage Incident Reports</p>
<p>and distributes them to the relevant stakeholders in a timely manner.</p>
<p> Maintains effective decision-making and leadership during technical, operational, and personnel-related challenges, ensuring safe and stable plant operation under pressure.</p>
<p> Coordinates with the Load Dispatch Centre (LDC) for plant start-ups, shutdowns, load changes, and planned or forced outages in accordance with grid and contractual requirements.</p>
<p> Supports cross-functional training and development across different operational areas as required by Management, enhancing workforce flexibility and effective utilization of resources.</p>
<p> Performs any other duties and responsibilities assigned by the Line Manager that are consistent with the role, whether or not specifically stated in this job description.</p>
<p> </p>
<p><br></p>
<p> </p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><strong>About us</strong> </span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions. </span></p><br><p><span><span><strong>PRIMARY RESPOSIBLITY</strong></span></span></p><br><p><span><span>Lead a team(s) of Materials Corrosion Engineers to carry out the materials activities to generate relevant deliverables on time, meeting QMS requirement according to Client requirements. </span></span></p><br><p><span><span>Able to handle efficiently multiple projects Ensure design integrity and deliverables quality for all areas within a project with special emphasis on interfaces. </span></span></p><br><p><span><span>Ability to develop CTR based on scope of work and provide input to finalize the project execution schedule. </span></span></p><br><p><span><span>Manage work assignments, workload, work forecasting for assigned projects. </span></span></p><br><p><span><span>Participate in HAZID, Design Reviews, HAZOP’s, IPF Classifications, HSE related Workshops. Implement/practice/monitor Quality Management System in assigned projects in line with ISO 9001 Ensure seamless handover of deliverables to project teams. </span></span></p><br><p><span><span>Manage and control all interfaces of the related discipline with other discipline and design product suppliers. </span></span></p><br><p><span><span>Liaison with vendors, contractor, and other Client personnel to satisfy the various aspects of the project. Preparation of requisitions and technical evaluation of subsequent bids for discipline material and equipment purchases and SACP and ICCP Cathodic Protection Systems. </span></span></p><br><p><span><span>Ensure designs are executed in line with International / Client / Company specifications, standards, and procedures. </span></span></p><br><p><span><span>To provide feedback on improvement to the applicable design standards</span></span></p><br><p><span><span><strong>SPECIFIC REQUIREMENT</strong></span></span></p><br><p><span><span>Demonstrated experience in Materials Selection (Concept / FEED / Detailed Design). </span></span></p><br><p><span><span>Demonstrated experience in corrosion analysis and implementing corrosion management programs. Demonstrated experience in validation of corrosion control, IOW, corrosion loops and damage mechanisms. </span></span></p><br><p><span><span>Demonstrated experience in cathodic protection Specification, Design, and Installation. </span></span><span><span>Demonstrated experience in conducting Risk Based Inspection. </span></span></p><br><p><span><span>Demonstrated experience in Painting and Coatings Specification </span></span></p><br><p><span><span>Shall have experience in all ranges of metallic and non-metallic materials. </span></span></p><br><p><span><span>Lead the material selection and corrosion control strategy for onshore oil and gas projects. </span></span></p><br><p><span><span>Conduct technical reviews of project specifications, designs, and engineering deliverables to ensure alignment with project requirements. </span></span></p><br><p><span><span>Identify, evaluate, and recommend materials suitable for various operating environments, considering factors like temperature, pressure, and corrosive media. </span></span></p><br><p><span><span>Develop and implement corrosion protection systems, including coatings, cathodic protection, and chemical treatment solutions. </span></span></p><br><p><span><span>Supervise and guide a multidisciplinary engineering team to meet project objectives and deadlines. Coordinate with project stakeholders, to ensure compliance with regulatory requirements and industry best practices. </span></span></p><br><p><span><span>Monitor project progress and ensure technical accuracy, cost control, and adherence to schedules. Perform detailed failure analysis, risk assessments, and life-cycle evaluations for materials and equipment. </span></span></p><br><p><span><span>Prepare and deliver comprehensive technical reports, specifications, and presentations to internal and external stakeholders. </span></span></p><br><p><span><span>Provide expertise in corrosion monitoring techniques and ensure implementation during project phases. Ensure all engineering activities comply, standards, and quality assurance procedures. </span></span></p><br><p><span><span>Support internal and external audits and address any findings related to materials and corrosion management. </span></span></p><br><p><span><span>Train and mentor junior engineers to build technical capabilities within the team.</span></span></p><br> <p><span><span><strong>Education, Qualification & Experience:</strong></span></span></p><br><p><span><span>Degree in relevant engineering subject (</span></span><span><span>B.Sc./B.Eng./M.Sc</span></span><span><span>.); Chemical, Mechanical, Materials </span></span><span><span></span></span></p><br><p><span><span> Sr. Engineer / Engineer shall have membership of an internationally accepted applicable professional </span></span></p><br><p><span><span>Minimum 15 years of experience in Oil & Gas. </span></span></p><br><p><span><span>Minimum 10 years of experience in Engineering Design (Concept / FEED / Detailed Design & Operations)</span></span></p><br><p><span><span>Experience in the middle east is preferred. </span></span></p><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>
Receive email alerts for Printing Engineer Jobs in Oman jobs
You can cancel your email alert at anytime