Machine operator Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>JOB PURPOSE:</strong> To carry out electrical maintenance activities of all plants and facility equipment s, all workshop equipments, paiting equipments and portable equipment s in order to ensure the activities of ship repair work are conducted as per timelines, quality, health and safety standards established within ADC and to ensure provision of smooth services to other departments in the Production division.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><p><strong>Day-to-Day Operations</strong></p><p>Carry our general, routine or preventive maintenance and repairs of plant and facility equipment and all other electrical equipment s in the shipyard facilities in order to ensure that all the equipment s are functioning properly and as per quality standards.</p><p>Follow the daily electrical maintenance plan laid out by the Maintenance Supervisor in order to ensure maintenance coverage of all equipment s are completed as per timelines.</p><p><strong>Breakdown Maintenance</strong></p><p>Carry out all electrical equipment s breakdown maintenance in the shipyard facilities as per established timelines depending on the criticality in order to ensure that the equipment is usable and the problem is resolved within minimal amount of time.</p><p><strong>Maintenance Log Reports</strong></p><p>Prepare logbook for routine, preventive, breakdown maintenance of all electrical equipment s in the industrial facilities in order to facilitate ease of access and reusability when required.</p><p>Track and monitor the equipment s requiring electrical maintenance as per their life cycle and utilisation in order to ensure proactive maintenance history and replacement as required.</p><p><strong>Quality Control</strong></p><p>Ensure adherence to quality in the electrical maintenance work in order to ensure that the readiness for quality control inspections and to support all other departments in the Production division.</p><p><strong>Material Requirements and Use</strong></p><p>Coordinate with Maintenance Supervisor if and when required in order to ensure that the material requirements are provided timely and accurately to complete the job requirements.</p><p><strong>Preparing Reports</strong></p><p>Prepare daily reports on progress of repair jobs in order to keep the Maintenance Supervisor aware of the progress and to ensure that the work is completed as per the schedule.</p><p><strong>Policies, Systems, Processes &amp; Procedures</strong></p><p>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</p><p><strong>Quality, Health, Safety, &amp; Environment</strong></p><p>Adhere to all relevant quality, health, safety and environmental procedures, instructions and controls in order to guarantee the safety of employees, quality of products/ services and environmental compliance can be guaranteed.</p><p><strong>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</strong></p><p>Internal: Production Division QA/QC</p><p>External: Other Departments</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications: Polytechnic/ 2 years ITI certificate course in electrical/ Electronic trade or equivalent</li><li>Minimum Experience: 5 years of relevant experience in Plant &amp; Facility equipments , Portable equipment s and machinery, etc maintenance and repair in shipyard or heavy industries or similar work</li><li>Job-Specific Knowledge &amp; Skills: Skills to replace/repair/adjust major electrical parts such as MCC, VFD, Motor starters, humidifiers, blower and all electrical network system etc. Hydraulic Power Packs,1000 Ton hydraulic press,700 Ton Frame bending machine and plate bending machine, Pneumatic cylinder, control valves and solenoid valves Various kinds of CNC machines such as CNC plasma and gas cutting machine, CNC turning center &amp; machine center, CNC drilling and cutting machine Painting equipment s such as hydro blasting machine, sand blasting machine, vacuum recovery</li><li>Understanding of general electrical drawing, and sequence drawing</li><li>Ability to interpret mechanical/electrical and electronic diagram</li><li>Exposure to ISO 9001:2015 standards</li><li>Communication and interpersonal skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> Bachelor of Nursing, with Certification in Advanced Emergency Medical Technician (EMT) or equivalent, and preferably with Certification in Occupational Health Nursing. </p> <p> Training certification in the following subjects, which shall be valid at the beginning and throughout the contract, with third-party international certification: </p> <p> Basic Life Support (BLS) </p> <p> Prehospital Trauma Life Support (PHTLS) </p> <p> Advanced Cardiovascular Life Support (ACLS) </p> <p> START Triage Certification </p> <p> First Aid Instructor (AHA Heartsaver) </p> <p> HACCP Level 3 Food Safety </p> <p> ECG and Airway Management </p> <p> ISO 45001 Auditor Certification </p> <p> Limited X-ray Machine Operator (LXMO) or equivalent (only for Block 60 - Bisat) </p> <p> Air Ambulance Operations Training (only for Musandam) </p> <p> Medical Review Officer (MRO) Certification (only for Musandam) </p> <p> 5 years of experience in emergency department or emergency medical service, preferably with experience in working at Onshore, Offshore, Refinery, Petrochemical or Petroleum processes. </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <div> <div> <div> <b>Job Duties</b> </div> <div>Under broad direction, provides well site service to customers of Baroid. Demonstrates advanced knowledge of colloidal and general chemistry, volume and hydraulics calculations and routine and specialized testing to varied field experiences. Provides guidance, including facilitating formal training, to fluid service representatives on company products and services, how drilling fluid technology can optimize service quality, industry knowledge, rig schedules, and rig operations. Conducts and interprets routine and specialized testing that provide technical guidance of Baroid&amp;aposs customized engineering fluids to maximize wellbore value. Tracks material usage and maintains record of same for inventory and billing purposes. Maintains good working relationship with operator&amp;aposs representative and rig personnel. Assists the operator&amp;aposs representative in specific operations planning and drilling operation optimization. Assists the Baroid Technical Professional and Operations staff in well planning and business delivery activities. Reviews well recaps for accuracy and capture of lessons learned. Takes an active role in mentoring Field Service Representatives. Complies with health, safety and environment regulations in all aspects of job performance. Minimum requirements are a H.S. Diploma, completed mud training at Halliburton and 5 years in fluid services. Completion of an undergraduate degree in any discipline is preferred. Mud Training Required. Math Test Required.</div> </div> <div> <div> <b>Qualifications</b> </div> <div> </div> </div> </div> <p> <b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p> <p> </p> <p> <b> <u>Location</u> </b> </p> <p>Str 2316, Bdg 65, Assarain Bdg, Muscat, Muscat, , Oman</p> <p> </p> <p> <b> <u>Job Details</u> </b> </p> <p> <b>Requisition Number:</b> 209990 <br> <b>Experience Level: </b>Experienced Hire <br> <b>Job Family:</b> Operations <br> <b>Product Service Line: </b>Baroid <br> <b>Full Time / Part Time: </b>Full Time</p> <p> <b>Additional Locations for this position: </b> </p> <p> </p> <p> <u> <b>Compensation Information</b> </u> <br> Compensation is competitive and commensurate with experience.</p></div></section>

<p><h4>Description</h4> <p>Turn passion into business. Bring Stranger Soccer to Oman.</p> <p>What if you could take something you love—football—and turn it into a sustainable, growing business? At Stranger Soccer, that’s exactly what we’ve made possible.</p> <p>We’re expanding our unique football experience platform to new cities, and we’re looking for a license owner / operator in Oman to take the reins. This is not a traditional role — it is designed for individuals who understand football culture, thrive on building something meaningful, and are ready to own and operate their own venture with the support of a proven global brand.</p> <p>Imagine this:</p> <ul> <li>Players in your city scroll through dozens of weekly football games on a mobile app.</li> <li>They book in seconds, show up, and play.</li> <li>Every game delivers a consistent, high-quality experience — because you are making it happen.</li> <li>You are at the center, operating a full football ecosystem for your community.</li> </ul> <h4>How it works</h4> <p>Stranger Soccer has redefined how people play the world’s most loved sport. Through our technology platform, we make casual football as easy to access as a gym session. Born in Singapore, Stranger Soccer is now open in 10+ cities around the world, with over 100,000 games run. Our model is built for scale — and we’re ready to bring it to Oman.</p> <h4>Who we’re looking for</h4> <ul> <li>A football enthusiast with strong local insight</li> <li>A strategic thinker with leadership and business experience</li> <li>An entrepreneurial mind ready to operate independently, with full support from HQ</li> <li>Someone who wants more than a job — they want ownership, impact, and results</li> </ul> <p>You’ll manage everything from operations to marketing to team recruitment — but you won’t be alone. Our HQ team provides the tools, playbook, and platform to help you succeed.</p> <h4>Why this opportunity stands out</h4> <p>This isn’t a typical job. It’s a business opportunity for someone with an entrepreneurial mindset to take the reins, lead locally, and build a venture that changes how people experience the beautiful game.</p> <p>Let’s change how the world plays football — one city at a time.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Oversee the daily maintenance, tuning, and optimization of key LDC applications including EMS/SCADA, WAMS, EDL, and DTS. Ensure the accurate modeling of new transmission assets (substations, lines, renewable energy sources) within the operational software environment. Serve as the lead technical liaison between control room operators and IT/software vendors to translate operational needs into technical requirements. Manage the technical setup and scenario development for the Dispatcher Training Simulator (DTS) to support operator qualification and drills. Provide advanced technical support and troubleshooting for application failures or performance lags affecting real-time operations. Monitor and report on the performance and availability of LDC applications, identifying opportunities for system upgrades or enhancements. Implement and enforce cybersecurity protocols and data integrity standards for all managed operational applications. Supervise the backup and disaster recovery procedures for operational databases and critical application configurations. Contribute to the development of Standard Operating Procedures (SOPs) for application use and data management. Manage the section s workforce, providing mentorship and technical training to staff to build internal expertise in power system applications. Knowledge and Understanding of Asset Management, QHSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, OHSAS 18001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix. Undertake additional responsibilities depending on Management and Business requirements</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Minimum Qualifications:</b></p><p>Bachelor s degree in electrical Power Engineering or Computer Engineering.</p><p><b>Professional Experience:</b></p><p>Minimum of 7 years of experience, in areas of Power System Operations, EMS/SCADA Systems., Utility Application Management</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Technicians shall have experience on kitchen equipment, central laundry equipment, pump sets, compressor stations, lifting gear hydraulics and pneumatics, with knowledge of associated controls.</p> <p>Particular experience of large sewage treatment plants, water treatment and Liquefied Petroleum Gas (LPG) installations would be an advantage.</p> <p>Experience in operation testing and calibration of sterilizing equipment.</p> <p>Must have good knowledge of electricity, electronics and associated equipment and be able to maintain mechanical equipment that may be found present in modern day autoclaves.</p> <p>Must have had experience in working with Gettinge type autoclaves as well as other brands and be aware of the British Standards laid down by Hospital Technical Memorandum 2022.</p> <p>The Technician must have a good knowledge of steam both theory and practice and its use in the sterilization process.</p> <p>His experience should also include hot air and gas sterilizers.</p> <p>Technician must be able to demonstrate the sterilization cycle.</p> <p>All Technicians will have knowledge of the safety requirements and regulations of rotating equipment and pressurized equipment.</p> <p>Shall be able to read, write and speak good English, to read drawings, and use micrometers and Vernier gauges.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Mechanical Technician should have a strong knowledge of the working principle of the above-mentioned fields, and should be familiar enough with all type of tools used in maintenance operations</p> <p>Mechanical Technicians must have a minimum of Five (01) year experience of central boiler steam raising plant, associated steam pipe work and controls, condense recovery systems and boiler water treatment. This will include knowledge of safety and current regulations as applied to such plant.</p> <p>Each must have a certificate of competence from a government-recognized source preferably a Class one Boiler Operators Certificate.</p> <p>Technicians shall have experience of machine shop work including lathe and milling machine work, screw cutting and other close tolerance work with welding ability.</p> <p>In addition to his basic mechanical skills, shall be a capable welder able to fabricate using electric or gas welding together with brazing.</p> <p>Able to do basic welding using electric or gas welding equipment in addition to their basic trade skills.</p> <p>Technicians should have training in medical gases installations including central plant for oxygen, medical air and vacuum pipe work systems and end user terminals with knowledge and application of Hospital technical memorandum (HTM) 2022 &amp; HTM02-01.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Technical Asset Manager <p>We are supporting a hospitality investment and asset management group in Oman with the appointment of a <strong>Technical Asset Manager</strong>.</p><br> <p>This is an excellent opportunity for a technical hospitality professional to join an owner-side asset management function and support the maintenance, condition, technical performance, and long-term value of a hotel portfolio.</p><br> <p><strong>Role Overview</strong></p><br> <p>The Technical Asset Manager will be responsible for planning, monitoring, and controlling maintenance, facilities operations, and technical asset management activities across operating hotel assets and shareholder properties.</p><br> <p>The role will work closely with hotel operators, General Managers, engineering teams, consultants, contractors, service providers, specialist vendors, and internal stakeholders to ensure that hotel assets are well maintained, compliant, cost-controlled, and aligned with ownership objectives.</p><br> <p>This is a portfolio-level technical asset management role. The successful candidate will support CAPEX planning, Property Improvement Plans, asset condition reviews, lifecycle maintenance planning, contractor performance, technical reporting, and operational readiness across existing assets, renovations, handovers, and hotel pre-opening or transition phases.</p><br> <p><strong>Key Responsibilities</strong></p><br> <ul> <li>Support the preparation of hotel CAPEX plans, Property Improvement Plans, and technical improvement priorities in coordination with operators, General Managers, engineering teams, consultants, and internal stakeholders.</li> <li>Conduct regular site visits and asset condition reviews to identify maintenance risks, asset deterioration, compliance gaps, and improvement requirements.</li> <li>Develop and monitor lifecycle maintenance plans to reduce reactive maintenance, extend asset life, and support long-term technical and capital planning.</li> <li>Review maintenance OPEX, CAPEX, renovation, and improvement budgets to ensure costs are realistic, controlled, and aligned with asset requirements.</li> <li>Track CAPEX, renovation, upgrade, and improvement works against approved budgets, timelines, scope, and quality standards.</li> <li>Work with hotel General Managers, operators, engineering teams, consultants, and contractors on maintenance projects, corrective works, renovations, and asset improvements.</li> <li>Ensure technical, safety, brand, operator, and asset condition standards are maintained during hotel operations, renovations, handovers, and pre-opening phases.</li> <li>Monitor contractor, consultant, vendor, and service provider performance against agreed scope, SLAs, safety requirements, quality standards, timelines, and cost controls.</li> <li>Monitor maintenance costs and technical performance to identify cost drivers, efficiency opportunities, service gaps, and required corrective actions.</li> <li>Ensure compliance with local regulations, HSE standards, statutory requirements, and internal policies across maintenance, technical, project, and facilities-related activities.</li> <li>Prepare regular technical asset reports covering property condition, maintenance risks, CAPEX progress, contractor performance, compliance matters, and recommended action plans.</li> <li>Support hotel pre-opening, handover, and transition activities by coordinating with development teams, operators, consultants, contractors, and internal stakeholders to ensure technical readiness and smooth transition into operations.</li> </ul> <p><strong>Required Experience</strong></p><br> <ul> <li>Bachelor's degree in Engineering, preferably Mechanical, Electrical, Civil, Facilities Management, or another relevant technical discipline.</li> <li>6–10 years of relevant experience in hotel engineering, technical asset management, facilities management, maintenance planning, project coordination, or owner-side asset operations.</li> <li>Proven exposure to hotel operations, multi-asset portfolios, CAPEX planning, Property Improvement Plans, contractor management, and asset condition reviews.</li> <li>Strong technical understanding of hotel engineering, building systems, maintenance standards, asset condition assessment, and lifecycle planning.</li> <li>Experience reviewing and monitoring OPEX, CAPEX, renovation, upgrade, and property improvement works.</li> <li>Strong understanding of HSE standards, statutory compliance, technical standards, and contractor management requirements.</li> <li>Strong project and stakeholder management skills, with the ability to work effectively with hotel operators, General Managers, engineering teams, consultants, contractors, vendors, and internal teams.</li> <li>Hands-on and execution-oriented approach, with strong cost awareness, attention to detail, and the ability to manage multiple hotel assets, urgent maintenance matters, and CAPEX works.</li> <li>Professional certifications such as PMP, CFM, FMP, hospitality engineering, asset management, or equivalent would be an advantage.</li> </ul> <br> <br> </div>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027, designed to operate as a regulated financial market infrastructure from day one.</p> <p>This is one of the two most important hires the organisation will make. We are not looking for a process-led project administrator. We are looking for a delivery-obsessed operator who hustles for outcomes, pushes the organisation when it needs pushing, and knows precisely when to escalate and pull in support rather than letting an issue fester. The project manager forms a tight core delivery unit with the programme director and the product owner, and is accountable for the end-to-end internal delivery of the platform and the operating model that surrounds it.</p> <p>What the role covers</p> <ul> <li>Owning the integrated delivery plan across design, build, test, operational readiness, and regulatory submission readiness; driving it relentlessly</li> <li>Sequencing work across technology, operations, risk, data, corporate services, and the build vendor; identifying dependencies and blockers early and resolving or escalating fast</li> <li>Owning the build CAPEX and OPEX budgets; tracking actual against forecast and bringing options, not just problems, to the programme director</li> <li>Chairing the weekly delivery forum and programme risk forum; running the programme governance rhythm from daily stand-ups through to quarterly board updates</li> <li>Setting and upholding the quality bar at each stage gate across the programme</li> <li>Line managing the programme office executive, business analysts, test manager, and testing team</li> <li>Providing candid, evidenced delivery reporting to the programme director and board</li> </ul> <p>Requirements</p> <p>Who we are looking for</p> <p>At least 12 years in programme or project management, with a minimum of seven years running large technology and operational change programmes in financial services. Direct, demonstrable experience personally leading a programme of comparable scale and complexity from a standing start: this is non-negotiable. Domain credibility in financial market infrastructure (CSD, CCP, exchange, or payment system) or capital markets platform delivery; able to speak the language of settlement, custody, clearing, and post-trade fluently. A track record of delivering against fixed regulatory or external deadlines. Recognised qualification: PMP, PRINCE2 Practitioner, MSP, or equivalent. Fluent in English.</p> <p>Experience working with global system integrators or major financial services build vendors is an advantage. So is familiarity with CPMI-IOSCO Principles for Financial Market Infrastructures and Arabic language skills.</p> <p>What this is</p> <p>The post-holder must be able to walk into rooms with vendors, regulators, advisors, and senior stakeholders and command respect from day one. Authority here comes from competence and credibility, not title. If you have genuinely led a regulated platform build of comparable weight from a standing start, and you have the drive and composure to do it again in a fast-moving greenfield environment, this is worth a conversation.</p></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027, designed to operate as a regulated financial market infrastructure from day one.</p> <p>This is one of the two most important hires the organisation will make. We are not looking for a process-led project administrator. We are looking for a delivery-obsessed operator who hustles for outcomes, pushes the organisation when it needs pushing, and knows precisely when to escalate and pull in support rather than letting an issue fester. The project manager forms a tight core delivery unit with the programme director and the product owner, and is accountable for the end-to-end internal delivery of the platform and the operating model that surrounds it.</p> <p>What the role covers</p> <ul> <li>Owning the integrated delivery plan across design, build, test, operational readiness, and regulatory submission readiness; driving it relentlessly</li> <li>Sequencing work across technology, operations, risk, data, corporate services, and the build vendor; identifying dependencies and blockers early and resolving or escalating fast</li> <li>Owning the build CAPEX and OPEX budgets; tracking actual against forecast and bringing options, not just problems, to the programme director</li> <li>Chairing the weekly delivery forum and programme risk forum; running the programme governance rhythm from daily stand-ups through to quarterly board updates</li> <li>Setting and upholding the quality bar at each stage gate across the programme</li> <li>Line managing the programme office executive, business analysts, test manager, and testing team</li> <li>Providing candid, evidenced delivery reporting to the programme director and board</li> </ul> <p>Requirements</p> <p>Who we are looking for</p> <p>At least 12 years in programme or project management, with a minimum of seven years running large technology and operational change programmes in financial services. Direct, demonstrable experience personally leading a programme of comparable scale and complexity from a standing start: this is non-negotiable. Domain credibility in financial market infrastructure (CSD, CCP, exchange, or payment system) or capital markets platform delivery; able to speak the language of settlement, custody, clearing, and post-trade fluently. A track record of delivering against fixed regulatory or external deadlines. Recognised qualification: PMP, PRINCE2 Practitioner, MSP, or equivalent. Fluent in English.</p> <p>Experience working with global system integrators or major financial services build vendors is an advantage. So is familiarity with CPMI-IOSCO Principles for Financial Market Infrastructures and Arabic language skills.</p> <p>What this is</p> <p>The post-holder must be able to walk into rooms with vendors, regulators, advisors, and senior stakeholders and command respect from day one. Authority here comes from competence and credibility, not title. If you have genuinely led a regulated platform build of comparable weight from a standing start, and you have the drive and composure to do it again in a fast-moving greenfield environment, this is worth a conversation.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Firefighter (Shift) Grade Stream Commercial &amp; Downstream RPI Function HSSE Fire Services &amp; Security Location Oman- Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to STL Fire Services (Shift A,B,C,D) Direct reports Job purpose Provides Fire Services at RPI locations, for the assigned team, under STL Fire Services Shift (A,B,C,D) scope and guidance from Sub-Officer and Snr Firefighters, through (1) Execute assigned tasks, (2) set &amp; implement day-to-day operations including work resource planning, (3) Coordinate site Inspections &amp; Emergency Preparedness, including the inspection programs of all required firefighting equipment, and (4) Carry out Incident control initial assessment of fire threat and possible escalation of hazards to contain any spread of damage to nearby areas; in order to ensure emergency preparedness as well as response to any emergencies at the assigned site and within the assigned shift.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities Follow the day-to-day operations related to own jobs in the Fire Services Department to ensure continuity of work Lead the fire unit shift personnel. Provide technical guidance on work duties and activities. Conduct audits/inspections/tests to verify the readiness of all fire protection unit equipment/vehicles and firefighting/protection equipment throughout company. Direct firefighter and Fire truck and pumper operators as necessary to ensure quick response to fire incidents. Assign firefighters and fire truck operators to regular maintenance schedules such as checking and cleaning fire trucks to ensure a high level of operational readiness. This includes overseeing routine maintenance checks on fire trucks and other firefighting equipment. Coordinate the inspection programs of all required firefighting equipment, coordinate all functional tests of fire detection/suppression systems and prepare the required written reports including initial fire/safety emergency reports and other work related issues encountered during the shift. Respond to all fire/emergency alarms in expedient/efficient manner and assist Fire Team to implement the correct fire protection/prevention measures as instructed by TL Fire Services Track defective equipment notifications with equipment owners and ensure equipment is repaired according to priority ratings. Allocate firemen to attend preventative maintenance on fire equipment by maintenance department on a daily basis Carry out initial assessment of fire threat and possible escalation of hazards to contain any spread of damage to nearby areas. Communicate by radio with all relevant senior firefighter, Firefighters and control room operators as first responders to a fire scene, test at the appropriate place to be well prepared for the fire accident as instructed by the team leader. Instruct security personnel/ fire officers to clear site of civilians and hazardous materials to prevent escalation of fire incident. Train various personnel on their roles during incidents. Provide Fire Services Team with recommendations for improving fixed fighting/ protection installations and fire protection/detection equipment for existing, new and modified facilities. Key interactions Internal: Liaise with the colleagues and stakeholders for day-to-day work External: Acts as liaison between Government offices, Society committee etc. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. (Shift)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications for this position is Higher national Diploma in Fire Safety Management/ Diploma in Fire Safety Management with Fire Officer Course or similar.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>Diploma Firefighter &gt;2 years of relevant experience</li><li>General Knowledge of industry preferable in Refinery, Petrochemical and Petroleum processes.</li><li>Fundamentals of HSSE - Comprehensive knowledge of occupational health &amp; safety. Detailed understanding of general industry standards and the requirements of the more frequently referenced standards</li><li>General knowledge of basic health and safety concepts such as hazard and risk assessment, personal protective equipment, Root cause analysis, behavior-based safety, machine/ equipment safety, confined space entry among others.</li><li>Knowledge of HSSE Management System.</li><li>Knowledge of risk management methods and practices.</li><li>Knowledge of HAZOP or similar studies.</li><li>Knowledge of Omani and International Environmental Standards and regulations.</li><li>Obtain National Fire Protection Association (NFPA) courses</li><li>Soft: Self-motivated and uses initiative and judgment to attain the best results. Demonstrates a high level of personal integrity. Establishes priorities and works with minimal direction. Participates in proactive team efforts to achieve departmental goals.</li><li>Technical: Ability to prepare, update and draft policies, procedures and guidelines</li><li>Having Heavy Driving License.</li><li>Demonstrates a personal commitment to health, safety and responsible environmental management.</li><li>Subject to on-call coverage</li></ul><p></p></section>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under general supervision, coordinates the work of Operator Assistants and Service Operators at the job site during the operation of surface or down hole well logging equipment. Coordinates the activities of Operator Assistants and Service Operators during rigging-up and rigging-down of surface and down hole well logging equipment. Performs pre-job calcuations as required. Obtains pertinent service work information from the customer and effectively communicates appropriate information to assigned worksite staff. Communicates pre-job and on-the-job progress to customer. Communicates and negotiates with customer to resolive issues concerning invoicing service irregularities. Recognizes possible sales opportunities for the Company&amp;aposs other products and services and communicates information to Service Coordinator or appropriate Company staff. Trains and provides guidance to Service Operators and Operator Assistants in the proper performance of pre-trip and post-trip vehicle and equipment inspections and associated paperwork and/or reports. Trains Service Operators and Operator Assistants in the assembly, operation, and maintenance of surface and down-hole well logging equipment including electric, nuclear, sonic, other well logging tools, and pressure control equipment. Completes appropriate documents, reports, and forms that affect the financial results of the business unit, (field ticket, etc.). Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through successful completion of high school or similar education and 2 years of experience as Service Supervisor-L&amp;P, I. Licensure to drive commercial equipment may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Must be knowledgeable of HMS standards and guidelines for PSL personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.<br><br><b>Qualifications</b> <br><br><br><p><b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p><br> <p><b><u>Location</u></b></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><b><u>Job Details</u></b></p><br> <p><b>Requisition Number:</b>&nbsp;208624&nbsp;&nbsp;<br> <b>Experience Level:&nbsp;</b>Experienced Hire&nbsp;<br> <b>Job Family:</b>&nbsp;Operations&nbsp;<br> <b>Product Service Line:&nbsp;</b>Wireline and Perforating&nbsp;&nbsp;&nbsp;<br> <b>Full Time / Part Time:&nbsp;</b>Full Time</p><br> <p><b>Additional Locations for this position:&nbsp;</b></p><br> <p><u><b>Compensation Information</b></u><br> Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>MAIN RESPONSIBILITIES</strong></p> <p> Promote and assist all employees in building and engaging in a proactive safety culture</p> <p> To demonstrate and promote safety leadership</p> <p> To ensure all rig personnel understand and comply with all Nabors Enterprise Quality Documents and HSE requirements</p> <p> To advise rig personnel on QHSE matters</p> <p> To provide QHSE support on-site as required</p> <p> To ensure all reporting meets Nabors requirements in a timely manner</p> <p> Personally responsible for own safety and conducting oneself to the standards of Nabors Policies and Procedures</p> <p> Coordinate with the Rig Manager and Area QHSE involving QHSE concerns</p> <p> Consult, advise and direct Drilling Operations in matters relating to QHSE</p> <p> Liaison with Operator in regard to QHSE matters</p> <p> Maintaining internal and external reporting according to established systems</p> <p> Consultation with outside experts on QHSE matters when required</p> <p> Participation in, and coordination of, rig HSE meetings</p> <p> Participate in Regulatory, Operator and Internal QHSE audits</p> <p> Participation in local HSE groups, to include operators, government and other drilling contractors</p> <p> Responsible for adherence to company guidelines</p> <p> Ensure rig complies with Nabors requirements</p> <p> Maintaining and updating Rig evacuation plans, procedures and measures</p> <p> Provide information to Management on accidents/incidents in a timely manner according to established Nabors and Operator procedures</p> <p> Monitor compliance against the monthly HSE schedule</p> <p> Coordinate with the Rig Manager concerning the implementation of the Enterprise Quality Documents onsite and the ongoing instructions to all personnel in it s use.</p> <p> Oversee implementation of SAFETY program on rig-site</p> <p> Monitor/chair/participate in regularly scheduled HSE meetings held at rigs and camps</p> <p> Oversee implementation of operational systems and procedures to include but not be limited to:</p> <p> Permit to Work System, Lock-Out/Tag-Out System, Hazardous Chemical -SDS, PPE System, HLO,</p> <p> H2S Awareness, Benchmarking, and other required training activities</p> <p> Monitor readiness/response to emergency situations through regularly held and documented drills</p> <p> Execution/Reviewing/Monitoring of required QHSE inspection for rigs and camps, reporting findings to the Rig Manager</p> <p> Maintenance of the Corrective Action Register for non-compliance items arising from meetings, audit and inspections</p> <p> Maintenance of the Lifting &amp; Slings Registers and Inspection Program for rigs</p> <p> Monitor compliance with Travel/Journey Management System where applicable</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education &amp; Experience</p> <p> A minimum Diploma certificate in Health Safety Environment or engineering (chemical, mechanical, or equivalent).</p> <p> A minimum of 3 years of HSE experience in drilling rig or well service operation.</p> <p> NEBOSH- International General Certificate.</p> <p> OPAL trainings certification.</p> <p> OPAL - HSE Advisor Skill Certification.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Seeking a Researcher in Artificial Intelligence with a PhD in Artificial Intelligence, Computer Science with specialization in AI, Machine Learning, Data Science, or Computer Engineering with AI specialization and a minimum of 5 years post-PhD experience. The ideal candidate will demonstrate a strong track record of publishing research findings, experience in funded projects, interdisciplinary knowledge, and proficiency in project management.</p> <p>Lead research in Artificial Intelligence, Machine Learning, Data Science and smart and autonomous systems for knowledge growth. </p> <p> Teach two courses each semester as per UoB policy. </p> <p> Manage projects, secure funding, and publish findings. </p> <p> Foster partnerships with industry and other academic institutions for research impact.</p> <p>Contribute to academic committees and activities. </p> <p> Mentor students and collaborate for excellence.</p> <p> Supervise student research projects.</p> <p>PhD in the field of artificial Intelligence, Computer Science with specialization in AI, Machine or deep Learning, Data Science, or Computer Engineering with AI specialization </p> <p> Minimum of 5 years Post PhD experience </p> <p>Demonstrated track record of publishing research findings in top-ranked journals. Experience in working on funded research projects. </p> <p> Research Skills: Strong research capabilities </p> <p> Interdisciplinary Knowledge: A broad understanding of interdisciplinary concepts and frameworks relevant to generative AI, machine learning, deep learning, data science, robotics, computer vision, autonomous systems, intelligent systems. </p> <p> Project Management: Proficiency in project management, including the ability to plan, organize, and prioritize tasks effectively to meet project deadlines and objectives.</p> <p><br></p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. Welding Procedure Specification (WPS), including welding current, voltage, wire feed speed, and travel speed.</p><p>2. Welding Position - operator has to know the welding positions</p><p>3. Blueprint Reads: Ability to read engineering prints and interpret welding symbols</p><p>4. Basic understanding of mechanical adjustments, torch alignments, and routine equipment maintenance</p><p>5. Safety and Material knowledge: Understanding of workplace safety standards (OSHA compliance) and handling Personal Protective Equipments (PPE)</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Deliverables to and through the Head of Department:</strong></p> <ul> <li>Coordinate production workflow for multiple finished goods</li> <li>Plan and prioritize operations to ensure maximum performance and minimum delay</li> <li>Determine equipment and raw materials required to cover production demand</li> <li>Assist in preparation and revision of MCP (Manufacturing Completion Program) and coordinate with respective departments to intimate the finalized MCP.</li> <li>Ensure all machines are utilized to their capacity and reduce idle production time to a minimum.</li> <li>Coordinate and follow-up for planning the semi-finished materials (outsourced items) including logistics, planned delivery, etc.</li> <li>Assist in preparation and revision of Daily Machine Schedule and Monthly Machine Load Capacity and coordinate with the respective departments to intimate the same.</li> <li>Coordinate to schedule shift according to production needs</li> <li>Coordinate to control WIP inventory on the shop floor.</li> <li>Monitor production lines to ensure the manufacturing is on schedule and within budget</li> <li>Monitor scrap production and control it within company set levels.</li> <li>Assist to enter the MES (Machine Efficiency System) data and analyze the same for any abnormality.</li> <li>Walk-around shop floor to analyze the shop floor machines, order, priority for production, etc.</li> <li>Coordinate with the QC department for final inspection and client inspection schedule and related activities.</li> <li>Coordinate with maintenance for scheduling the preventive and breakdown maintenance of the machinery.</li> <li>Address issues when they arise aiming for minimum disruption</li> <li>Prepare and submit status and performance reports</li> <li>Collaborate with quality control, maintenance, warehouse and other staff</li> </ul> <p> </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Qualifications</b></p> <ul> <li>Bachelor's Graduate in Engineering (most preferred: Industrial, Process, or any other engineering)</li> </ul> <p><b>Skills/Knowledge</b></p> <ul> <li>Excellent communication skills in English.</li> <li>Relationship management skills.</li> <li>Ability to take timely actions and decisions.</li> <li>Proven experience as production planner</li> <li>Excellent knowledge of production planning and quality control principles</li> <li>Experience in Manufacturing resource planning</li> <li>Working knowledge of MS Office and ERP systems</li> <li>Good at math and statistics</li> <li>Strong organizational and problem-solving skills</li> </ul> <p> u&gt;Experience/u&gt;:</p> <ul> <li>2-5 years of experience in related industries.</li> <li>Experience in cable manufacturing industry is an added advantage.</li> </ul> <p> u&gt;Business Understanding/u&gt;:</p> <ul> <li>Good understanding of the cable manufacturing operations is essential.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Deliver undergraduate and postgraduate courses in Artificial Intelligence, Machine Learning, NLP, Programming (Python &amp; C++), and Web Development.</p> <ul> <li>Develop and update course materials, assessments, and laboratory exercises aligned with industry trends.</li> <li>Supervise student projects, including capstone projects, AI-based applications, and research initiatives.</li> <li>Engage in research, publication, and innovation activities in AI/ML and related domains.</li> <li>Provide academic advising and mentorship to support student success and career development.</li> <li>Participate in curriculum development, accreditation (OQF), and quality assurance activities.</li> <li>Collaborate with industry partners to incorporate real-world applications and emerging technologies into teaching.</li> </ul> <p><strong>FURTHER REQUIREMENTS</strong></p> <ul> <li>Clear teaching philosophy focused on fostering critical thinking, inclusivity, and lifelong learning</li> <li>A strong commitment to teaching excellence and student-centered learning</li> <li>Ability to integrate theoretical knowledge with practical cybersecurity applications</li> <li>Engagement in interdisciplinary collaboration and innovation.</li> <li>Effective communication skills, as all teaching and academic activities are conducted in English</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>PhD in Artificial Intelligence, Machine Learning</p> <p>More than 6 years of Teaching experience and additional Industrial experience</p> <p>Proficiency in b&gt;English /b&gt; is a must.</p> <p>Must have strong specialization in Artificial Intelligence (AI), Machine Learning (ML), and Natural Language Processing (NLP). Proficiency in Python programming, Object-Oriented Programming (OOP) using C++, and modern software development practices.</p> <p> Professional Qualification</p> <ul> <li>TensorFlow Developer Certificate,</li> <li>Microsoft Certified Azure AI Engineer Associate,</li> <li>IBM AI Engineering Professional Certification etc.</li> </ul> <p>First Preference:</p> <p>Omani candidate</p><p></p></section>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>