وظائف اختبار البرمجيات في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To provide guidance, insights, and execute with autonomy, the refinery hydrocarbon accounting and reconciliation. This is achieved by practicing defined strategies, plans, and programs for the end-to-end process of comparing and reconciling the production of refinery hydrocarbons among the parties involved in production and sales under the purview of Hydrocarbon Accounting leadership. The individual will act as the Subject Matter Expert for HCA Refinery accounting reconciliation, including measurement, data collection, validation, reconciliation, and reporting.</p><p>1) Provide guidance and insights and ensures that hydrocarbon accounting procedures and reports are prepared accurately and according to agreed schedules. Additionally, conducts routine reconciliation of production and off-take satisfactorily in liaison with reconciliation engineers, Production Planning, Scheduling, and the Financial Accounting team.</p><p>2) Provide guidance and insights while developing strategies for Fuel &amp; loss accounting in accordance with high management performance standards, focusing on control/reduction planning.</p><p>3) Offers guidance for Refinery Production Accounting, including the formulation and drafting of Crude processing and finished product mass balance reports to provide qualitative input to stakeholders.</p><p>4) Provide guidance, insights, and data field analysis to address production difficulties effectively.</p><p>5) Execute the reconciliation of hydrocarbon production data with third parties, ensuring alignment with production targets while tracking and controlling production.</p><p>6) Manage the accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p>7) Guide and coach younger staff in HCA Refinery Reconciliation processes, identifying potential losses or discrepancies in the production and sales process, implementing corrective actions to prevent future losses, improve efficiency, and ensure accurate compensation for all parties involved in the production and sales chain.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by IT hardware and software platforms, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Accountabilities</strong></p><p><strong>Scope Refinery Hydrocarbon Accounting and Reconciliation:</strong></p><p>Develop and assess Hydrocarbon accounting procedures and ensure that accounting reports are prepared accurately and according to agreed schedules for routine production reconciliation.</p><p>Conduct off-take activities satisfactorily in collaboration with the Senior Engineer in Production Planning, Scheduling, and Finance Accounting.</p><p>Devise strategies for fuel &amp; loss accounting in alignment with Heat-mass balance (HMB) standards and plan for control/reduction.</p><p>Formulate &amp; draft crude processing and finished products mass balance reports to provide qualitative input to stakeholders.</p><p>Review field data analysis to adopt plans that overcome production difficulties.</p><p>Account for the hydrocarbons produced and reconcile data with third parties while effectively tracking and controlling production to ensure meeting production targets. Handle accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p><strong>General</strong> Through active participations, recommend actions and manage Mass balance data to ensure the optimum use of resources.</p><p>Contribute to the achievement of the approved Performance Objectives for the Section / Department in line with the Company Performance framework</p><p><strong>Data collection &amp; Master Data Validation</strong> Manage and maintain the company's records of movements with the operation departments, and ensure updated changes are captured in a timely manner.</p><p>Ensure high quality data is recorded into reconciliation tools &amp; accurate mass balance information in ERP.</p><p>Manage the database and produce monthly reports of each production facilities.</p><p>Maintain database and prepare report for deferment analysis, plant production opportunity losses and related statistics.</p><p>Enable the accurate Master data management for ERP &amp; Reconciliation application.</p><p>Validate the accuracy of the data collected by comparing it to other sources of data and industry standards.</p><p><strong>System development.</strong></p><p>Execute hydrocarbon accounting activities and maintain the reporting system.</p><p>Ensure that product yields and quantities are continuously monitored, analysing performance deviations, and initiating investigations for any deviations. Determine corrective actions as necessary.</p><p>Prepare internal and external daily and monthly management production reports, ensuring that the required report quality is achieved and that reports are issued in an effective and timely manner.</p><p>Prepare various ad hoc reports related to hydrocarbon deliveries and inventory.</p><p>Conduct daily analysis of production, identifying production losses, and highlighting production optimization opportunities.</p><p>Administer procurement and sales contracts related to hydrocarbon accounting activities.</p><p>Reconcile accounts and generate various reports related to refined product exports.</p><p>Perform necessary month and year-end closing activities.</p><p>Analyse the Process historian data for movement reconciliation.</p><p>Facilitate hydrocarbon accounting auditing and provide all required inputs as requested.</p><p>Provide input for monthly performance monitoring reviews (PMR), follow up on observations, and close out any identified gaps</p><p><strong>Supervision</strong> Provide opportunities for training and development of employees under his/her direction, assess their progress and suggest gap closing program</p><p><strong>Policies, Systems, Processes &amp; Procedures</strong> Implement approved Section / Department policies, processes, systems, standards, and procedures to support execution of the Section s / Department work programs in line with Company and International standards.</p><p><strong>Innovation and Continuous Improvement</strong></p><p>Design and implement new tools and techniques to improve the quality and efficiency of operational processes.</p><p>Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with international standards to define intelligent solutions for issues confronting the function.</p><p>Review of system Validation, Process control &amp; bringing more Automation, Dashboard reporting.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education requirements</strong> Minimum Qualifications for this position are bachelor s degree in chemical engineering or similar</p><p><strong>Language</strong> Excellent knowledge of written, read, and spoken English (required)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>8+ years of relevant experience</p><p>Demonstrated experience in the Oil &amp; Energy sector, with emphasis in Downstream (Refinery Operations &amp; Processes)</p><p>Experience in reading and analyse benchmarking activities</p><p>Process Reconciliation Tools. (Preferably Sigmafine)</p><p>Process Historian, IT interfaces</p><p>Hydrocarbon Contract management,</p><p>Performance analysis, assessment with Analytical &amp; Reporting tools (SAP - BW/BI, Power BI)</p><p>Project management</p><p>Financial advice and support to business projects</p><p>Have a sound knowledge of API / ASTM standard for the quantity conversion.</p><p>Have a sound knowledge of SAP transactions, Product pricing, Production cost accounting &amp; gross margin analysis.</p><p><strong>Soft:</strong></p><p>Detailed oriented with a self-starter attitude.</p><p>Excellent Organization and time management</p><p>Result oriented.</p><p>Communication skill verbal and written</p><p>Detailed Analytical &amp; Accurate Reporting skills</p><p>Personal and Team Accountability</p><p>Decisiveness</p><p>Problem Solving Skills</p><p>Work Prioritization, Planning and Organizing</p><p>Ability to work under pressure and handle sensitive/critical issues effectively.</p><p><strong>Technical:</strong></p><p>Strong computer skills, including proficiency in Microsoft Word, Excel, Vision, and PowerPoint</p><p>Excellent writer (technical and non-technical)</p><p>Application Knowledge for HCA accounting &amp; reconciliation,</p><p>Knowledge of ERP configuration, ERP transactions, rules, and regulations</p><p>Knowledge of Policies &amp; Procedure of business process management</p><p>Knowledge of Laboratory Processes.</p><p></p></section>

<ul><li>Produce detailed technical drawings and plans using CAD software, ensuring precision and compliance with industry standards.</li><li>Collaborate with engineers and architects to interpret design concepts and translate them into workable drafting solutions.</li><li>Review and revise drawings based on feedback from project stakeholders, ensuring accuracy and adherence to specifications.</li><li>Prepare layout designs for construction projects, including dimensions, materials, and construction methods.</li><li>Conduct site visits to gather information and assess project requirements, providing insights that enhance the design process.</li><li>Maintain organized records of all drawings and revisions, ensuring easy access for future reference and project continuity.</li><li>Assist in the preparation of project documentation, including specifications and reports, to support project bids and proposals.</li><li>Utilize 3D modeling software to create realistic representations of design concepts, enhancing visualization for clients and teams.</li><li>Stay updated on industry trends and advancements in drafting technology to continuously improve skills and methodologies.</li><li>Ensure compliance with safety regulations and quality standards in all drafting work, prioritizing the integrity of the project.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A diploma or degree in Drafting, Engineering, Architecture, or a related field is essential for foundational knowledge.</li><li>At least 3 years of hands-on experience in drafting within the construction or manufacturing industries is preferred.</li><li>Proficiency in CAD software, such as AutoCAD or SolidWorks, is a must for creating accurate and detailed drawings.</li><li>Certification from recognized professional bodies, such as the American Design Drafting Association (ADDA), is highly valued.</li><li>Fluency in English is required; additional languages may be beneficial for international projects and collaborations.</li><li>Strong attention to detail and the ability to spot inconsistencies in drawings or specifications is crucial for quality assurance.</li><li>Excellent communication skills are necessary for effective collaboration with engineers, architects, and clients.</li><li>A proactive attitude and problem-solving skills are essential for addressing challenges during the drafting process.</li><li>Ability to work under tight deadlines while maintaining high standards of accuracy and quality in all deliverables.</li><li>Physical ability to perform site visits and navigate construction sites safely is important for gathering necessary data.</li></ul>

<p>Discover the Opportunity Are you an expert UiPath Architect ready to lead high-impact automation initiatives? We are seeking a Solution Architect to serve as the technical mastermind behind expanding, enterprise-grade Intelligent Process Automation (IPA) architectures for a huge telecom organization. Discover the Responsibilities • Design scalable, sustainable, end-to-end RPA frameworks and write comprehensive Solution Design Documents (SDD). • Incorporate cutting-edge UiPath capabilities, including Intelligent Document Processing (IDP), Document Understanding, OCR, and AI/ML models into enterprise workflows. • Enforce development best practices, conduct code reviews, and guide high-performing developer teams to align with core architectural standards. • Oversee seamless integrations between UiPath software and legacy IT infrastructure, databases (SQL/NoSQL), and APIs. • Act as the strategic bridge between business leads and development teams to translate operational requirements into technical automation solutions. Discover the Requirements • Experience: 7+ years in software development or RPA, with at least 3+ years specifically as a UiPath Solution Architect. • Certification: UiPath Advanced RPA Developer (UiARD) or UiPath Certified Professional certification is required. • Deep proficiency in UiPath Document Understanding and IDP capabilities. • Hands-on coding experience in C#, .NET, Python, or Java. • Strong scripting skills in PowerShell, JavaScript, or VBA. • Solid database experience (SQL/NoSQL) and building/consuming REST/SOAP APIs. • Domain Background: Proven track record delivering complex automation projects within enterprise or regulated domains (e.g., Telecom, Banking, or Energy). This role is located in Muscat, Oman - a stunning coastal capital known for its breathtaking natural landscapes, from dramatic mountain ranges to clear turquoise wadis. It offers a peaceful, high-quality lifestyle while being just a short 1-hour flight from Dubai.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Experience:</strong> 7+ years in software development or RPA, with at least 3+ years specifically as a UiPath Solution Architect.</li><li><strong>Certification:</strong> UiPath Advanced RPA Developer (UiARD) or UiPath Certified Professional certification is required.</li><li>Deep proficiency in UiPath Document Understanding and IDP capabilities.</li><li>Hands-on coding experience in C#, .NET, Python, or Java.</li><li>Strong scripting skills in PowerShell, JavaScript, or VBA.</li><li>Solid database experience (SQL/NoSQL) and building/consuming REST/SOAP APIs.</li><li><strong>Domain Background:</strong> Proven track record delivering complex automation projects within enterprise or regulated domains (e.g., Telecom, Banking, or Energy).</li></ul>

<ul><li>Prepare detailed construction drawings and plans that adhere to local building codes and regulations, ensuring clarity and precision for contractors.</li><li>Collaborate closely with architects and engineers to translate design concepts into actionable drawings, maintaining alignment with project timelines and specifications.</li><li>Utilize advanced CAD software to create 2D and 3D models, refining designs based on feedback and technical requirements to enhance project outcomes.</li><li>Conduct site visits to gather measurements and assess project feasibility, integrating real-world conditions into the drafting process for accuracy.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A diploma or degree in civil engineering, architecture, or a related field to ensure a strong foundational knowledge of construction principles.</li><li>Proficiency in CAD software such as AutoCAD, Revit, or MicroStation is essential for creating high-quality, detailed drawings.</li><li>Minimum of 3 years of relevant work experience in civil drafting, demonstrating a solid track record of successful project contributions.</li><li>Familiarity with local building codes, zoning laws, and industry standards to ensure compliance in all drafting tasks.</li></ul>

<p>Key Responsibilities:</p><p>Sales Duties:</p><ul><li>Assist customers in identifying required spare parts.</li><li>Provide product details, price, and availability.</li><li>Prepare quotations and invoices for customers.</li><li>Upsell related products to increase sales.</li><li>Maintain records of customer inquiries and follow-ups.</li><li>Coordinate with the warehouse for item availability and delivery.</li></ul><p>Cashier Duties:</p><ul><li>Handle daily cash, credit card, and other payment transactions.</li><li>Maintain accurate billing and receipts.</li><li>Balance cash register at the end of each shift.</li><li>Report discrepancies, if any, to the branch accountant or supervisor.</li><li>Ensure safe handling of cash and timely deposit to the company account.</li></ul><p>Skills Required:</p><ul><li>Basic knowledge of auto spare parts.</li><li>Customer service and communication skills.</li><li>Computer proficiency (especially billing software or ERP).</li><li>Basic accounting or cashiering skills.</li><li>Attention to detail and accuracy.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Skills Required:</p><ul><li>Basic knowledge of auto spare parts.</li><li>Customer service and communication skills.</li><li>Computer proficiency (especially billing software or ERP).</li><li>Basic accounting or cashiering skills.</li><li>Attention to detail and accuracy.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a skilled Java Full Stack Developer to join our growing technology team. The ideal candidate will have strong backend expertise in Java with hands-on experience in front-end technologies.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Develop, test, and implement Java-based web applications</p></li><li><p>Build and maintain front-end applications using Angular</p></li><li><p>Debug web application issues and resolve bugs efficiently</p></li><li><p>Participate in the full Software Development Life Cycle (SDLC) — from requirements gathering and design to development, testing, and deployment</p></li><li><p>Design and maintain efficient, reusable Java code</p></li><li><p>Collaborate with cross-functional teams to define, design, and ship new features</p></li><li><p>Handle any additional tasks assigned by management</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Hands-on experience with OOPS, Spring Framework (Spring Boot), Spring JPA, REST API, SOAP, JSON, XML</p></li><li><p>Hands-on experience with Oracle and PostgreSQL databases (SQL &amp; PL/SQL)</p></li><li><p>Proficiency in front-end technologies — Angular, JavaScript, HTML5</p></li><li><p>2–4 years of server-side development experience with a solid foundation in object-oriented analysis and design</p></li><li><p>Good understanding of front-end technologies and integration</p></li></ul><p></p></section>

<p>Identify and lead the development and implementation of Prepress workflow process improvements and automation. Responsible for devising a tracking system of daily work orders in correlation with the production schedule and on-time delivery to the customers. Maintain consistent communications of project details and scheduled job status with other managers and customer service. Communicate with customers regarding any problems, questions, or concerns if required. Record problems, such as downtime, and the actions taken. Monitor and ensure that the artwork for printing is prepared as per the customer's needs. To assist customers with all aspects of their printing requirements. Oversee the maintenance of machines in the repro department. Update the software required in the repro department with approval from the management. In charge of ordering consumables (Plates, chemicals, Screens, papers, toners, cartridges) and checking before using them for quality output. Assist in the continuous improvement of customer supply chains to the repro/design process to improve operational efficiency and customer service. Ensure that the department's procedures are followed maintained and further developed when required. Flexo Plate making , Esko ,Packaging &amp; Labeling Software</p>

<p>Identify and lead the development and implementation of Prepress workflow process improvements and automation. Responsible for devising a tracking system of daily work orders in correlation with the production schedule and on-time delivery to the customers. Maintain consistent communications of project details and scheduled job status with other managers and customer service. Communicate with customers regarding any problems, questions, or concerns if required. Record problems, such as downtime, and the actions taken. Monitor and ensure that the artwork for printing is prepared as per the customer's needs. To assist customers with all aspects of their printing requirements. Oversee the maintenance of machines in the repro department. Update the software required in the repro department with approval from the management. In charge of ordering consumables (Plates, chemicals, Screens, papers, toners, cartridges) and checking before using them for quality output. Assist in the continuous improvement of customer supply chains to the repro/design process to improve operational efficiency and customer service. Ensure that the department's procedures are followed maintained and further developed when required. Flexo Plate making , Esko ,Packaging &amp; Labeling Software</p>

<p>Identify and lead the development and implementation of Prepress workflow process improvements and automation. Responsible for devising a tracking system of daily work orders in correlation with the production schedule and on-time delivery to the customers. Maintain consistent communications of project details and scheduled job status with other managers and customer service. Communicate with customers regarding any problems, questions, or concerns if required. Record problems, such as downtime, and the actions taken. Monitor and ensure that the artwork for printing is prepared as per the customer's needs. To assist customers with all aspects of their printing requirements. Oversee the maintenance of machines in the repro department. Update the software required in the repro department with approval from the management. In charge of ordering consumables (Plates, chemicals, Screens, papers, toners, cartridges) and checking before using them for quality output. Assist in the continuous improvement of customer supply chains to the repro/design process to improve operational efficiency and customer service. Ensure that the department's procedures are followed maintained and further developed when required. Flexo Plate making , Esko ,Packaging &amp; Labeling Software</p>

<p>Identify and lead the development and implementation of Prepress workflow process improvements and automation. Responsible for devising a tracking system of daily work orders in correlation with the production schedule and on-time delivery to the customers. Maintain consistent communications of project details and scheduled job status with other managers and customer service. Communicate with customers regarding any problems, questions, or concerns if required. Record problems, such as downtime, and the actions taken. Monitor and ensure that the artwork for printing is prepared as per the customer's needs. To assist customers with all aspects of their printing requirements. Oversee the maintenance of machines in the repro department. Update the software required in the repro department with approval from the management. In charge of ordering consumables (Plates, chemicals, Screens, papers, toners, cartridges) and checking before using them for quality output. Assist in the continuous improvement of customer supply chains to the repro/design process to improve operational efficiency and customer service. Ensure that the department's procedures are followed maintained and further developed when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Flexo Plate making , Esko ,Packaging &amp; Labeling Software</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Service Desk Technician is responsible for providing first-line technical support to end users, resolving IT-related issues, and ensuring efficient operation of IT services across the organization.</p><p><strong>Key Responsibilities</strong></p><ul><li>Provide first-line support for hardware, software, network, and system-related issues.</li><li>Respond to user requests via phone, email, or ticketing system in a timely manner.</li><li>Troubleshoot and resolve basic technical issues or escalate complex problems to higher support levels.</li><li>Install, configure, and maintain computer systems, peripherals, and software applications.</li><li>Support user account management, including password resets and access requests.</li><li>Log, track, and update service tickets in the IT service management system.</li><li>Assist in maintaining IT assets inventory and documentation.</li><li>Support system updates, patches, and routine maintenance activities.</li><li>Ensure compliance with IT policies, procedures, and security standards.</li><li>Provide guidance and basic training to end users when needed.</li></ul><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Information Technology, Computer Science, Information Systems, or a related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of computer hardware, software, and operating systems.</li><li>Understanding of IT troubleshooting and support concepts.</li><li>Familiarity with Windows, Microsoft Office, and basic networking concepts.</li><li>Knowledge of ticketing systems (e.g., ServiceNow or similar) is an advantage.</li><li>Ability to learn technical systems quickly.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong communication and customer service skills.</li><li>Good problem-solving abilities.</li><li>Ability to work under pressure and handle multiple requests.</li><li>Attention to detail and patience when dealing with users.</li><li>Teamwork and collaboration skills.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based and service desk environment.</p><p>May require shift work or on-call support depending on operational needs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Information Technology, Computer Science, Information Systems, or a related field.</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><ul><li>Basic knowledge of computer hardware, software, and operating systems.</li><li>Understanding of IT troubleshooting and support concepts.</li><li>Familiarity with Windows, Microsoft Office, and basic networking concepts.</li><li>Knowledge of ticketing systems (e.g., ServiceNow or similar) is an advantage.</li><li>Ability to learn technical systems quickly.</li></ul><ul><li>Strong communication and customer service skills.</li><li>Good problem-solving abilities.</li><li>Ability to work under pressure and handle multiple requests.</li><li>Attention to detail and patience when dealing with users.</li><li>Teamwork and collaboration skills.</li></ul><p>The applicant must be a job seeker.</p><p>The applicant must be an Omani national.</p><p>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</p><p>The applicant must not have previously benefited from any training program funded by either the public or private sector.</p><p>The applicant must have no more than three (3) years of work experience.</p><p>The applicant must not be more than 38 years of age</p><p></p></section>

<p>Provide expert technical engineering leadership and operational support for OQEP's offshore facility facilities, including piping systems in processing plants and production platforms, under the direction of the Manager Operation &amp; Maintenance Support, ensuring safe, reliable, available and efficient operations across Upstream Surface Operations. The role delivers robust technical judgement, innovative engineering solutions and operability, availability and reliability assessments for off shore facility, evaluating modification and innovation proposals against project requirements, engineering standards and operational integrity. It provides hands-on operational support, technical troubleshooting and readiness assurance for assigned assets, while acting as the operations interface with projects, procurement, supply and other stakeholders. The role also mentors and develops production and junior engineers into self-sufficient performers, embeds common engineering principles across teams, and drives operational excellence, safety and reliability across OQEP's surface operations facilities.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Provide robust technical engineering expertise and innovative solutions for the execution and operation of offshore facility (piping systems in processing plants and production platforms), ensuring teams apply common engineering principles and concepts.</li><li>Lead and deliver operability, availability and reliability assessments on systems related to offshore facility, providing robust technical judgement on modification and innovation proposals in line with project requirements, engineering standards, safety and reliability.</li><li>Handle a large scope of concurrent engineering activities and projects, prioritizing and delivering high-quality technical outputs across multiple assets simultaneously.</li><li>Analyze complex technical, operational and reliability issues on offshore facility and recommend solutions that significantly improve safety, availability and performance.</li><li>Provide operational support for offshore facility (piping systems in processing plants and production platforms) at Upstream Surface Operations.</li><li>Deliver assigned operational duties and tasks for the assets, including technical support, troubleshooting, backup and other services to operate applicable hardware, systems software and application software.</li><li>Modify and improve engineering processes, standards, operating procedures and technical documentation to enhance reliability, integrity and operational efficiency.</li><li>Measure and assure progress towards the state of Operational Readiness to Operate (ORA), ensuring readiness for safe and efficient operations at the site.</li><li>Act as the Operations interface to manage procurement and supply issues, ensuring timely availability of technical materials, spares and services.</li><li>Act as the ORA interface to engage and coordinate with different stakeholders across the function on readiness, technical and operational matters.</li><li>Provide technical leadership, guidance and review to junior engineers, trainees and teams on engineering principles, standards and operational practices.</li><li>Mentor and coach production engineers and staff to build capability and develop them into self-sufficient, high-performing engineers.</li><li>Convince and influence internal stakeholders, projects and vendors to adopt sound engineering solutions, operability improvements and reliability-centred practices.</li><li>Support incident investigation, root cause analysis and corrective actions for offshore facility reliability and integrity issues.</li><li>Support planning, budgeting, forecasting and reporting for operations support engineering activities and embed KPIs in day-to-day work.</li><li>Perform other similar duties as assigned by the Manager Operation &amp; Maintenance Support.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Surface Operations, Operation &amp; Maintenance Support, Well Delivery, Projects Delivery, Technical Services, HSSE, Contract &amp; Procurement, and all relevant operational and support functions.</li><li>External: EPC and engineering contractors, equipment and piping vendors, OEMs, technical service providers, and specialist engineering consultants.</li></ul><p><strong>Notable Working Conditions</strong>. Combination of office and field/plant environment; regular presence at processing plants and production platforms; intensive computer screen use; exposure to operational site conditions; occasional after-hours support for operational and readiness matters.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Education Requirements</strong> Required: Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline. Relevant post-degree qualification or professional engineering certification is preferred. Master's degree is a plus.</li><li><strong>Language</strong> Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</li><li><strong>Background and experience</strong><ul><li>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</li><li>Proven track record of providing technical engineering leadership and operational support for offshore facility.</li><li>Strong experience in:<ul><li>offshore facility and piping systems (processing plants and production platforms).</li><li>Operability, availability and reliability engineering.</li><li>Operational Readiness Assurance (ORA) and readiness-to-operate assessments.</li><li>Technical troubleshooting and operational support.</li><li>Modification and innovation proposal review against engineering standards.</li><li>Incident investigation and root cause analysis.</li><li>Engineering standards, codes and operating procedures.</li><li>Procurement and supply interface for technical materials and services.</li><li>Mentoring and developing junior engineers and Omani national talent.</li></ul></li></ul></li><li><strong>Behavioural Competencies</strong><ul><li>Strong technical and analytical problem-solving skills.</li><li>Sound engineering judgement and decision-making.</li><li>Maintaining effective, accurate and transparent communication with all stakeholders.</li><li>Attention to detail and safety-first mindset.</li><li>Planning and prioritization across multiple activities.</li><li>Negotiation and influencing.</li><li>Ethics, integrity and compliance.</li><li>Engages and inspires colleagues to collaborate and share knowledge.</li><li>Pursues innovation and continuous improvement.</li><li>Acts as an agent for change, constructively challenging the status quo.</li><li>Mentoring and coaching capability.</li><li>Composure under operational and readiness pressure.</li></ul></li><li><strong>Technical Competencies</strong><ul><li>Offshore facility and piping systems engineering (processing plants and production platforms).</li><li>Operability, availability and reliability engineering.</li><li>Operational Readiness Assurance (ORA) and readiness-to-operate.</li><li>Technical troubleshooting and operational support.</li><li>Modification/innovation proposal review and technical judgement.</li><li>Engineering standards, codes and operating procedures.</li><li>Incident investigation and root cause analysis (RCA).</li><li>Process safety and asset integrity awareness.</li><li>Procurement and supply interface for technical materials.</li><li>Hardware, systems software and application software for operations.</li><li>Excellent business and technical report writing skills.</li><li>Very good knowledge of PC software and engineering tools.</li></ul></li></ul>

<p><b>Job title </b>Logistics &amp; Materials Engineer Grade Stream Upstream E&amp;P Function Well Delivery Department Operated Asset Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Well Delivery Support Manager Direct Reports - Job purpose The Materials &amp; Logistics Engineer is responsible for planning, coordinating, and controlling materials and logistics activities to ensure that all required materials are available on time, meet technical and quality requirements, and support project schedules. The role supports drilling, workover, and well intervention operations by working closely with engineering, procurement, vendors, logistics providers, and site teams to ensure smooth project execution. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities Review material requisitions and technical specifications to ensure compliance with company and project standards. Coordinate with drilling and engineering teams to address technical queries, material substitutions, and deviations. Ensure materials are procured, stored, and handled according to approved specifications, procedures, and industry standards. Maintain accurate material traceability, certifications, and documentation throughout the supply chain. Support the technical evaluation of vendors and materials when required. Review scopes of work related to materials, inspection, transportation, and quality control to ensure alignment with oil and gas industry best practices. Coordinate material receiving, inspection, storage, preservation, and issuance activities. Plan and manage inbound and outbound logistics, including transportation, shipping, and customs clearance, in line with OPAL standards. Ensure timely delivery of materials to warehouses, yards, and project sites according to project schedules. Monitor inventory levels and support stock optimization to prevent shortages or excess materials. Ensure proper identification, tagging, and preservation of materials to avoid damage or deterioration. Support periodic inventory audits and reconciliation processes. Interface with procurement, contracts, QA/QC, drilling, construction, and operations teams. Prepare and provide materials and logistics status reports to project management. Support expediting activities to ensure vendors and logistics providers meet agreed milestones. Participate in project planning and coordination meetings related to materials and logistics. Coordinate with well delivery team members to identify critical materials that must be prioritized for transportation. Ensure all activities comply with company supply chain policies, HSSE requirements, and quality management systems. Identify opportunities to improve logistics efficiency, material handling processes, and cost effectiveness. Ensure hazardous and non-hazardous materials are correctly labeled, packaged, and returned to base in accordance with environmental regulations. Contribute to lessons learned and continuous improvement initiatives. Use materials management and inventory systems to track material orders, consumption, and stock levels in real time. Key interactions Internal: Upstream External : Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed. Education requirements Minimum qualification is a bachelor s degree in mechanical engineering or equivalent. Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 5+ years relevant experience in similar role Understanding of materials management and drilling procedures. Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software Soft: Attention to detail and high level of accuracy. Able to lead discussions credibly and effectively negotiate resolutions. Previous experience working with a diversified workforce, with good people skills Highly organized, detail-oriented and able to work independently. Strong Communication skills and coordination skills (including verbal and written). Analytical and problem solving skills. Technical: Very good knowledge in using material management software. Excellent business and technical report writing skills Deep working understanding of material management and operations Planning and Reporting skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum qualification is a bachelor s degree in mechanical engineering or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>5+ years relevant experience in similar role</li><li>Understanding of materials management and drilling procedures.</li><li>Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software</li><li>Attention to detail and high level of accuracy.</li><li>Able to lead discussions credibly and effectively negotiate resolutions.</li><li>Previous experience working with a diversified workforce, with good people skills</li><li>Highly organized, detail-oriented and able to work independently.</li><li>Strong Communication skills and coordination skills (including verbal and written).</li><li>Analytical and problem solving skills.</li><li>Very good knowledge in using material management software.</li><li>Excellent business and technical report writing skills</li><li>Deep working understanding of material management and operations</li><li>Planning and Reporting skills.</li></ul>