Automotive Engineer Jobs in Oman

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Quality Control (QC) Engineer – Construction Excellence Specialist<br></strong><br> Are you a detail-driven engineer passionate about delivering exceptional quality in large-scale construction projects? Join a dynamic team where your expertise in quality control systems will directly impact the successful execution and handover of complex infrastructure. As a QC Engineer, you will be at the forefront of maintaining rigorous construction quality management standards, collaborating closely with site teams, subcontractors, and project leaders to ensure every deliverable meets contractual and regulatory requirements. Your role is pivotal in driving quality processes, identifying issues early, and championing continuous improvement that safeguards the integrity and safety of our projects.<br> Required Skills<ul><li>Strong knowledge and practical experience in implementing construction Quality Control (QC) management systems.</li><li>Proven ability to assist in planning, developing, and executing quality programs aligned with contract and project quality plans.</li><li>Experience reviewing and approving product/material requisitions and subcontractor quality documentation, including Quality Management Systems, quality plans, and Inspection Test Plans (ITPs).</li><li>Skilled in conducting quality inductions, monitoring inspections, and assessing contractor compliance with QC procedures.</li><li>Proficiency in data management relating to QC records, non-conformance reports (NCRs), and turnover documentation.</li><li>Excellent communication skills to promote quality awareness and deliver targeted training.</li><li>Proficient in Microsoft Office Suite.</li></ul>Nice to Have Skills<ul><li>Familiarity with international standards such as EN standards, ASME code, EN1090 (structural steel), and the Pressure Equipment Directive (PED) for piping.</li><li>Quality Auditor certification from a recognized industry body.</li><li>Experience with construction completion and turnover management processes.</li><li>Understanding of Romanian regulatory requirements (ISCIR, INSEMEX, ISU, AFER, ANRE, RENAR, ISC).</li></ul>Preferred Education and Experience<ul><li>Bachelor’s degree in Engineering or a closely related discipline.</li><li>Minimum of 5 years of hands-on experience working in quality roles within EPC (Engineering, Procurement, and Construction) contract environments.</li><li>Demonstrated background in welding engineering, supported by relevant training or internationally recognized courses.</li></ul>Other Requirements<ul><li>Ability to work collaboratively with multidisciplinary teams and subcontractors on site.</li><li>Proven organizational skills for maintaining robust QC documentation and reporting.</li><li>Willingness to engage in local management reviews and continuous improvement initiatives.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Renardet S.A. &amp; Partners is multidisciplinary company that provides consultancy services for design, construction supervision, technical assistance and project management for infrastructural, architectural and industrial fields of work. The company has executed more than 1500 compound projects in domain of infrastructure, hydrology, structures and dams, as well as low-rise and high-rise buildings (architecture), thanks to our international experts and their expertise.</p><p>The Opportunity:</p><p>Resident Engineer (for Site Supervision Road Project)</p><p>In order to provide a quality and satisfactory service to our clients, we are looking for experts that apart from having excellent knowledge and experience in their field, also possess personal traits such as flexibility in their work environment, team work attribute as well as leadership spirit.</p><p>For a number of projects that will commence in the following months, Renardet S.A. &amp; Partners is looking to hire on a call of contract basis.</p><h2>Job Description:</h2><ul><li>Proven leadership, decision-making, and team management skills are necessary for supervising a multidisciplinary team of engineers, geologists, and inspectors.</li><li>Overseeing all construction activities for dam components, ensuring compliance with designs, specifications, and safety standards.</li><li>Provides technical guidance, resolve site specific problems, and review work plans, method statements, and materials submissions.</li><li>Manage a team of engineers and staff, coordinate with the contractors, and ensure work is completed efficiently.</li><li>Monitors project progress, assess risks, prepare a detailed progress reports, and review contractual issues like claims and variations.</li><li>acts as main point of contact with the Client, contractors, and regulatory bodies.</li><li>ensuring construction activities adhere to the project's budget and timeline.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements:</h2><ul><li>Bachelor s degree in science in Civil Engineering;</li><li>Minimum of 15 years of experience in the construction supervision of roads and bridges.</li><li>Out of these 15 years, at least 8 years shall have been served in the capacity of Resident Engineer.</li><li>Must have at least 5 years experience in the middle east.</li><li>Proficiency in English language (spoken and written).</li></ul><p>Your CV in English language shall be sent exclusively electronically.</p><p>The shortlisted candidates will be contacted for the selection process</p>

<p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p><p><br></p><p>b</p><ul><li>Provide leadership for procurement activities required to support project delivery, including the execution of purchase orders and sourcing of materials through approved company systems.</li><li>Oversee the complete supply chain lifecycle for each purchase order, ensuring compliance with contract requirements, company procedures, and applicable work practices.</li><li>Lead, guide, and develop sourcing and logistics personnel by establishing effective control mechanisms, strengthening process discipline, and improving operational efficiency.</li><li>Develop and implement supply chain strategies that support continuous improvement across contracting, sourcing, logistics, expediting, inventory, and preservation activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require CCTV and Electronical Engineer for group of Company at Oman. Candidates must know CCTV installation, Fire Alarm, ELV &amp; LV System. Candidate must know NFPA Standard.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must know CCTV installation, Fire Alarm, ELV &amp; LV System. Candidate must know NFPA Standard.</p><p></p></section>

<p>This job is contract under Nama Dhofar Services by ISAG Consulting Engineers. -Duration of contract: 2 years. Main Job Description: Responsible for protecting wastewater SCADA and OT infrastructure against cyber threats by implementing security controls, ensuring regulatory compliance, conducting risk assessments, and maintaining secure and resilient industrial control environments.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Cybersecurity, Computer Engineering, or related field.</li><li>Minimum 10 years of experience in industrial cybersecurity (ICS/OT environment preferred).</li><li>Strong understanding of:<ul><li>Network segmentation and industrial firewalls</li><li>IDS/IPS systems</li><li>SIEM tools and log monitoring</li><li>Risk management in control systems</li></ul></li><li>Familiarity with industrial cybersecurity standards and frameworks.</li><li>Preferred Certifications: CISSP, CISM, or equivalent</li><li>GICSP (Global Industrial Cyber Security Professional)</li><li>CEH (optional)</li><li>Training or certification aligned with IEC 62443</li></ul>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</li><li>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</li><li>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</li><li>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</li><li>Contribute to monthly production planning and reservoir-surveillance planning as required.</li><li>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</li><li>Participate in integrated field studies for maturing hydrocarbon resources.</li><li>Evaluate well and reservoir performance and recommend production-improvement opportunities.</li><li>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</li><li>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</li><li>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</li><li>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</li><li>Fulfil stand-by / on-call duties when required.</li><li>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</li><li>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</li></ul><p><strong>Notable Working Conditions</strong></p><p>Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Language requirements Excellent knowledge of written, read, and spoken English (required).</li></ul><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: HSE Engineer (Health, Safety &amp; Environment Engineer)</p><p>Reports To: HSE Manager / Operations Manager</p><p>Job Details</p><p>Number of Vacancies: 3 Positions</p><p>Salary Range: OMR [REDACTED] per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The HSE Engineer is responsible for ensuring a safe working environment by developing, implementing, and monitoring health, safety, and environmental policies and procedures. The role focuses on risk reduction, regulatory compliance, and promoting a strong safety culture across all operations.</p><p>Key Responsibilities</p><ul><li>Develop, implement, and maintain HSE policies, procedures, and safety programs.</li><li>Conduct risk assessments, hazard identification, and job safety analyses (JSA).</li><li>Monitor workplace activities to ensure compliance with safety and environmental regulations.</li><li>Conduct safety inspections, audits, and site walkthroughs.</li><li>Investigate incidents, accidents, and near-misses, and prepare detailed reports with corrective actions.</li><li>Ensure compliance with local regulations and international safety standards.</li><li>Deliver safety training, toolbox talks, and awareness programs for employees and contractors.</li><li>Maintain HSE documentation, records, and reporting systems.</li><li>Support emergency response planning, drills, and preparedness activities.</li><li>Monitor environmental performance and ensure proper waste management and pollution control practices.</li><li>Coordinate with operations, maintenance, and project teams to ensure safe work practices.</li><li>Recommend improvements to reduce risks and improve workplace safety culture.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications</b><br>Bachelor s Degree in Environmental Engineering, Safety Engineering, Occupational Health &amp; Safety, Chemical Engineering, or a related field.<br><b>Experience</b><br>Practical Experience: 0 (No prior work experience required)<br>Internship or academic experience in HSE or safety-related activities is an advantage.<br><b>Technical Skills</b><br>Basic understanding of HSE management systems (ISO 45001, ISO 14001).<br>Awareness of risk assessment and safety procedures.<br>Basic knowledge of incident reporting and investigation methods.<br>Ability to assist in safety inspections and training activities.<br>Understanding of environmental compliance concepts.<br>Basic proficiency in Microsoft Office and reporting tools.<br><b>Soft Skills</b><br>Strong willingness to learn and develop professionally.<br>Good communication and teamwork abilities.<br>Strong attention to detail.<br>Ability to follow procedures and work under supervision.<br>Basic problem-solving mindset.<br><b>Working Conditions</b><br>Office, field, and site-based environments. May require site inspections and participation in safety drills and emergency situations.<br><b>Application Note :</b><br>The applicant must be a job seeker.<br>The applicant must be an Omani national.<br>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.<br>The applicant must not have previously benefited from any training program funded by either the public or private sector.<br>The applicant must have no more than three (3) years of work experience.<br>The applicant must not be more than 38 years of age</p></section>

<p>We are looking for a motivated and enthusiastic Electrical Engineer (Renewable Energy) to join our team.</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have:<br>1- A strong interest in sustainable energy technologies, particularly Solar PV, Wind Energy, and other renewable energy systems.<br>2-The ability to multitask and handle both site and office work.<br>3- Excellent technical report writing and communication skills.</p>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<ul><li><p>Generate new business opportunities and achieve monthly sales targets.</p></li><li><p>Promote and sell HVAC Annual Maintenance Contracts (AMC).</p></li><li><p>Identify and secure new clients across commercial, residential and industrial sectors.</p></li><li><p>Conduct site visits to assess customer requirements.</p></li><li><p>Prepare technical and commercial quotations, primarily for AMC contracts and small HVAC projects.</p></li><li><p>Follow up on quotations and negotiate with clients to successfully close sales.</p></li><li><p>Build and maintain long-term relationships with customers.</p></li><li><p>Coordinate with the operations team to ensure smooth execution of awarded jobs.</p></li><li><p>Maintain records of leads, quotations, sales activities and customer interactions.</p></li><li><p>Identify new market opportunities and contribute to business growth</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree or Diploma in Mechanical Engineering or a related field.</p></li><li><p>Minimum 2–5 years of HVAC sales experience, preferably in Oman or the GCC.</p></li><li><p>Strong knowledge of HVAC systems, maintenance services and AMC contracts.</p></li><li><p>Experience preparing technical and commercial quotations.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Self-motivated with the ability to work independently in a startup environment.</p></li><li><p>Valid Omani driving license is preferred.</p></li><li><p>Proficiency in Microsoft 365</p></li></ul><br><p><strong>Skills</strong></p><ul><li><p>HVAC Sales & Business Development</p></li><li><p>Quotation Preparation</p></li><li><p>Customer Relationship Management</p></li><li><p>Negotiation & Closing</p></li><li><p>Technical Understanding of HVAC Systems</p></li><li><p>Time Management</p></li><li><p>Problem Solving</p></li></ul><br><p><strong>Compensation & Benefits</strong></p><ul><li><p>Salary: OMR 700 – 1,000 per month</p></li><li><p>Performance-based incentives/commission.</p></li><li><p>Opportunity to grow with a fast-growing startup.</p></li><li><p>Professional development and career progression.</p></li><li><p>Supportive and dynamic work environment</p></li></ul>

<p>Responsible for configuration, maintenance, and optimization of SCADA systems used for monitoring and control of wastewater treatment plants, lifting stations, and associated infrastructure, ensuring system reliability, accurate alarm management, and operational efficiency.</p><p>Configure and maintain SCADA servers, clients, and historian systems. Develop and update HMI screens, trends, and reporting dashboards. Implement alarm configuration, rationalization, and performance optimization. Integrate new PLCs/RTUs and field devices into the SCADA system. Perform system backups, patching coordination, and version control. Support FAT, SAT, commissioning, and system upgrades. Ensure data integrity and accuracy for operational and regulatory reporting. Provide technical support to operations and maintenance teams. Perform any other duties assigned by NDS Management as required.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Electrical, Instrumentation, or Control Engineering. Minimum 8 years of experience in SCADA system configuration and maintenance within industrial environments (water/wastewater preferred). Experience in PLC/RTU integration and industrial communication protocols. Familiarity with Windows Server environments, virtualization, and SCADA redundancy setups.</p><p>Preferred Certifications: Project-specific SCADA platform certification PLC programming certification ISA training (ISA-95 / ISA-99 awareness)</p>

<p>The Ideal Candidate must have mixed experience in both proposal and estimation and MUST have experience in CANDY software. Strong knowledge of estimation software, pricing methodologies, and market rate analysis. Familiarity with Omani construction market, cost structures, and local suppliers / subcontractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors Degree in Civil, Mechanical or Electrical Engineering. Minimum 8 12 years of experience The Ideal Candidate must have mixed experience in both proposal and estimation and MUST have experience in CANDY software.</p>

<p>Production Engineer Responsibilities: - Identify manpower requirements based on production plans. - Raise manpower requisitions for new hires. - Coordinate with the HR department for recruitment activities. - Screen resumes and shortlist suitable candidates. - Conduct initial interviews for operators, technicians, and production staff. - Evaluate candidates' technical skills, experience, and attitude. - Plan and conduct new employee induction and orientation. - Train new employees on production processes, quality standards, and safety procedure.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements - 3-7 years experience in sandwich panel manufacturing company.</p>

<p>We are seeking an experienced and highly motivated Senior Tendering Engineer to join our team in Oman. The ideal candidate will have a minimum of 10 years of experience in tendering and proposal management within the energy sector, including Oil &amp; Gas, Power Generation, Transmission &amp; Distribution, Renewable Energy, or EPC projects. The candidate will be responsible for managing the complete tendering process, ensuring competitive, compliant, and commercially sound proposals that support the company's business growth.</p><p>Key Responsibilities</p><ul><li>Lead the end-to-end tendering and bidding process from receipt of inquiry to final submission.</li><li>Review tender documents, technical specifications, commercial requirements, and contractual terms.</li><li>Coordinate with engineering, procurement, estimation, finance, legal, and project teams to prepare comprehensive technical and commercial proposals.</li><li>Develop accurate cost estimates, pricing strategies, and bid documentation.</li><li>Prepare bid clarifications and respond to client queries during the tender evaluation process.</li><li>Conduct risk assessments and identify commercial, technical, and contractual risks associated with bids.</li><li>Negotiate with suppliers and subcontractors to obtain competitive quotations.</li><li>Ensure all tender submissions comply with client requirements, company standards, and applicable regulations.</li><li>Maintain bid schedules and ensure timely submission of proposals.</li><li>Support management during contract negotiations and project handover after award.</li><li>Monitor market trends, competitor activities, and upcoming opportunities within the energy sector.</li><li>Maintain an organized repository of tender documentation and proposal templates.</li><li>Contribute to continuous improvement of tendering processes and best practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, Instrumentation, or equivalent). Additional qualifications in Project Management or Commercial Management are an advantage.</p><h2>Experience</h2><p>Minimum 10 years of proven experience in tendering, bid management, or proposal engineering within the Energy sector . Experience in EPC projects related to Oil &amp; Gas, Power, Utilities, Renewable Energy, or Industrial Infrastructure. Previous experience working in GCC countries, particularly Oman, is preferred.</p><h2>Required Skills</h2><ul><li>Strong knowledge of tendering procedures and contract documentation.</li><li>Excellent understanding of commercial and contractual terms (FIDIC knowledge is an advantage).</li><li>Proficiency in cost estimation, pricing, and bid preparation.</li><li>Strong analytical and problem-solving abilities.</li><li>Excellent negotiation and communication skills.</li><li>Ability to manage multiple tenders simultaneously under tight deadlines.</li><li>Strong organizational and leadership skills.</li><li>Proficiency in Microsoft Office Suite, especially Excel and Word.</li><li>Experience with ERP systems (SAP, Oracle, or similar) and estimation software is preferred.</li><li>Excellent written and spoken English. Arabic language skills are an added advantage.</li></ul><h2>Key Competencies</h2><ul><li>Strategic thinking</li><li>Commercial awareness</li><li>Attention to detail</li><li>Decision-making</li><li>Leadership and team collaboration</li><li>Time management</li><li>Client-focused approach</li><li>Ability to work under pressure</li></ul>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<p>Plan, coordinate, and support ELV projects from execution through completion. Coordinate with consultants, contractors, suppliers, and internal teams. Review ELV drawings, specifications, BOQs, and technical documents. Monitor project progress, schedules, materials, and deliverables. Coordinate ELV installation, inspection, testing, commissioning, and handover. Ensure work complies with approved drawings, specifications, quality, and safety requirements. Identify and resolve technical issues, delays, and project-related challenges. Prepare project reports, progress updates, and required documentation. Support RFIs, technical submittals, inspections, and material approvals. Perform other project and engineering duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical, Electronics, or a related Engineering field.</li><li>3 5 years of relevant ELV project engineering experience.</li><li>Good knowledge of ELV systems such as CCTV, Access Control, Structured Cabling, Intercom, PA, SMATV/IPTV, etc.</li><li>Ability to read and interpret technical drawings, schematics, specifications, and BOQs.</li><li>Experience in project coordination, installation, testing, and commissioning.</li><li>Proficient in Microsoft Office; AutoCAD knowledge is an advantage.</li><li>Good English communication skills, both written and verbal.</li><li>Strong organizational, analytical, and problem-solving skills.</li><li>Relevant ELV or project management certifications are an added advantage.</li><li>Quick learner, proactive, and self-motivated.</li><li>Strong ownership and attention to detail.</li><li>Good time management and coordination skills.</li><li>Adaptable to changing project requirements.</li><li>Team player with a positive and collaborative attitude.</li></ul>

<p>Act as technical authority for WTG erection activities. Supervise unloading, storage,</p><p>preservation, assembly and installation of turbine components. Coordinate crane</p><p>operations and heavy lifts for tower sections, nacelles, hubs and blades. Ensure</p><p>compliance with OEM procedures, quality requirements and HSE standards. Manage</p><p>subcontractors and interfaces with civil, electrical and commissioning teams. Support</p><p>mechanical completion, punch-list clearance and handover.</p><ol><li><p>Minimum Experience Requirements</p></li></ol><p>Minimum 8-10 years in industrial construction. Minimum 8 years dedicated to wind</p><p>turbine erection projects. Proven experience on wind farms above 300 MW.</p><p>Demonstrated involvement from construction through commissioning and COD.</p><p>Experience with international EPC contractors and OEM turbine suppliers.</p><ol><li><p>Preferred OEM Experience</p></li></ol><p>Candidates with hands-on experience in Vestas, Siemens Gamesa, GE Vernova,</p><p>Nordex, Enercon, Goldwind or Sany technologies shall be prioritized.</p><ol><li><p>Technical Competencies</p></li></ol><p>WTG erection methodology; tower installation; nacelle installation; blade mounting; bolt</p><p>tensioning; hydraulic torque equipment; alignment and leveling; lifting studies; heavy</p><p>crane operations; turbine preservation; mechanical inspections; quality dossiers; turbine</p><p>commissioning support; punch-list management; defect identification and rectification;</p><p>work packaging and construction sequencing.</p><ol><li><p>Construction and Project Management</p></li></ol><p>Management of subcontractors, daily progress monitoring, look-ahead planning,</p><p>resource allocation, productivity tracking, interface management, schedule recovery</p><p>actions, risk management and reporting to project management teams.</p><ol><li><p>HSE Requirements</p></li></ol><p>Strong leadership in lifting operations, work at height, rescue plans, permit to work</p><p>systems, lock-out tag-out procedures, risk assessments, toolbox talks and zero-harm</p><p>safety culture. Candidate must demonstrate a proactive safety leadership record.</p><ol><li><p>Qualifications</p></li></ol><p>Bachelor Degree in Mechanical Engineering or related discipline. English proficiency</p><p>B2/C1. Ability to work in remote locations and rotational assignments. Wind industry</p><p>certifications and GWO training are highly desirable.</p><ol><li><p>Geographic Experience</p></li></ol><p>Experience in international utility-scale wind projects is preferred. Middle East, Europe,</p><p>Latin America, Asia-Pacific and Africa wind farm experience will be considered</p><p>advantageous.</p><p><strong>Desired Candidate Profile</strong></p><p>This document defines the minimum and preferred recruitment requirements for hiring a Senior Wind Turbine Erection Engineer responsible for planning, supervision, erection, installation, quality control, mechanical completion and commissioning support of utility scale wind turbine generators (WTG). The role is intended for , Owners Engineers and Owner Representatives involved in onshore and offshore wind projects.</p>

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>