3D Designers Jobs in Oman

<p>Responsible for E&I work during Engineering and estimation stage.</p><ol><li><p>Review bid/ RFQ documents for material requisition including but not limited to client project specifications, scope of supply, data sheets, P&ID’s, drawings & client requirements to prepare the BOM, required documentation for engineering and during estimation for submission of commercial/technical package.</p></li><li><p>Carry out estimation work (e.g. materials take-off for various electrical and instrumentation items & estimate for E&I works)</p></li><li><p>As required attend client pre/post tender meeting including required site visits.</p></li><li><p>Obtaining techno-commercial offers for raw material prices from suppliers/vendors directly as per Approved vendor list.</p></li><li><p>Review the suppliers’ offer and ensure its compliance with client project specifications at bidding and detail engineering stage.</p></li><li><p>Review supplier offers including but not limited to cable, cable glands, control panel, JB, Data acquisition system, gauges, transmitters, flow meters, analyzers, instrument tubing, actuators etc.</p></li><li><p>Should be able to make data sheets for various electrical and instrumentation items for purchasing purposes.</p></li><li><p>Assist 3D modeler for cable tray routing, instrument tubing routing etc.</p></li><li><p>Should be able to prepare the single line diagram, hookup diagrams, cable schedule etc.</p></li><li><p>Coordinate with the other department head to obtain a more realistic estimate and from ERP, sales dept to compare with similar projects completed.</p></li><li><p>Review all offers/prices of materials/equipment suppliers and sub-contractors’ proposal, as applicable. During tender stage, Estimator to review and select out from offers provided by UES purchasing department from approved/known suppliers/sub-contractors the most competitive offer and ensure that conforms to the technical specs requirement for the project.</p></li><li><p>Finalize/summarize the required estimation costing and prepare draft proposal as per the templates available.</p></li><li><p>Submit estimation to the Engineering & Proposal Manager for review and costing along with the prelim draft technical/commercial proposal.</p></li><li><p>Assist the Engineering & Proposal Manager in the compilation of Bid Package for submission to client including all required accompanying documents.</p></li><li><p>Contract review for newly awarded projects; carry out technical & commercial contract review of contract documents (e.g. PO with its accompany documents such as project specs, drawings) in comparison with UES submitted quotation, tender docs and post tender bulletins to ensure that all the said documents are matching/in-alignment and check for any +/-variations.</p></li><li><p>Prepares quotation for Electrical and Instrumentation works for metering skids.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>. Bachelor’s degree in Electronics and Instrumentation engineering with minimum 8-10 years of experience in Oil & Gas, Manufacturing industry.</p><ol><li><p>Minimum 5-6 years experience with Skids manufacturing company.</p></li></ol><p>Minimum Work Knowledge & Experience :</p><ol><li><p>Knowledge of international codes like ASME, ANSI, SHELL DEP, PDO Spec & API, ETEX, IEEX etc.</p></li><li><p>Electrical and Instrumentation works for various process skids like separator, injection skids, GDU, conditioning skids, dosing skids etc…</p></li><li><p>Must have knowledge of reading Fabrication drawing and estimate man hours.</p></li><li><p>Skills on extracting bills of materials from GA, P&ID’s and summarizing cost estimate.</p></li><li><p>Should have knowledge of methods and procedures relating to Fabrication, Inspection, Testing and Painting.</p></li><li><p>Understanding of P&ID’s, PEFS for entire skid packages and experience in electrical / instrumentation items.</p></li><li><p>Project planning and execution experience</p></li><li><p>Familiarity with ISO 9001 procedures.</p></li><li><p>Knowledge of Mechanical designs and Auto CAD drafting practice are an added advantage.</p></li></ol>

<p> <strong>Job description</strong> </p> <p> <strong>Job Purpose </strong> </p> <p>The main purpose of this position is to create high impact visual aspects of marketing materials, books, magazines, product packaging, websites, exhibitions, creating corporate identity, websites and other media, including infographics for branding. The incumbent will be an integral part of the branding team and will work with marketing, copywriting and sales teams to create cohesive designs that reflect company's corporate culture and goals.</p> <p> </p> <p> <strong>Main Tasks &amp; Accountabilities</strong> </p> <p> <strong>Design Management</strong> </p> <ul> <li>Meeting relevant stakeholders to discuss the business objectives and graphic requirements.</li> <li>Estimating the time required to complete the work.</li> <li>Schedule project implementation and define budget constraints.</li> <li>Take the Design brief to record requirements and needs.</li> </ul> <p> </p> <p> <strong>Campaign Management</strong> </p> <ul> <li>Work with a wide range of media and use graphic design software.</li> <li>Think creatively and develop new design concepts, graphics, and layouts.</li> <li>Using innovation to redefine a design brief within the constraints of cost and time.</li> <li>Presenting finalized ideas and concepts for review.</li> <li>Amend final designs to stakeholder comments and gain full approval.</li> <li>Deliver graphics for marketing campaigns and other Branding exercises.</li> </ul> <p> </p> <p> <strong>Product Advertising</strong> </p> <ul> <li>Review all messaging/communication releasing it for review.</li> <li>Work on product advertising as per the required guidelines.</li> <li>Performs all other tasks and activities as assigned.</li> </ul> <p> </p> <p> <strong>People Management and Teamwork</strong> </p> <ul> <li>Create a supportive environment for the team members.</li> <li>Contribute to the team, letting others know information that may be useful or important.</li> <li>Help to create a fun, supportive work environment</li> <li>Keep accurate and up to date, information on graphics designed for past and ongoing brand promotion exercises and campaigns.</li> </ul> <p> </p> <p><br></p><ul> </ul> <p> </p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Person Specification (Qualifications, Knowledge &amp; Experience) </strong> </p> <p> <strong>Education Level Minimum Requirement </strong> </p> <p>Bachelor s in Graphic Design, Visual communication, Digital Media or related field required</p> <p> </p> <p> <strong>Professional Qualifications</strong> </p> <ul> <li>Membership of Chartered Society of Designers (CSD) / International Society of Typographic Designers (ISTD) preferred.</li> <li>Certificate course in 3D design, communication design, film/television, fine art, graphic design, illustration, photography, or visual art.</li> <li>Possess a valid driver s license.</li> </ul> <p> </p> <p> <strong>Work Experience </strong> </p> <ul> <li>Experience 0 to 3 years in professional commercial design, preferably with a marketing or creative agency.</li> <li>Strong understanding of the Middle East culture.</li> </ul> <p> </p> <p> <strong>Job Specific Skills </strong> </p> <ul> <li>Working knowledge of CSS3, HTML5 and JavaScript.</li> <li>Experience working with WordPress templates.</li> <li>Extensive experience in both print and electronic media and familiarity with software tools like InDesign, Photoshop, QuarkXPress, Illustrator, Acrobat and Dreamweaver, specifically with mockups, web design and multimedia presentation.</li> <li>Highly proficient in all design aspects.</li> <li>Intimate understanding of how marketing campaigns work.</li> <li>Experience in creating powerful visuals that engage, inform, and motivate.</li> <li>Highly creative with instinctive feeling about future product concepts; Up to date with latest trends and marketing best practices.</li> <li>Adaptive design eye and skill.</li> <li>Possession of creative flair, versatility, conceptual/visual ability and originality.</li> <li>Demonstrable graphic design skills with a strong portfolio.</li> <li>Energetic and passionate about one s line of work (graphic designing) with ability to work cohesively with a wide range of people from different parts of the business and external partners.</li> <li>Strong analytical skills and data-driven thinking.</li> <li>Financial awareness to understand and interpret numbers.</li> <li>Excellent written &amp; verbal communication skills, Team builder with excellent motivational skills to inspire others.</li> </ul> <p> </p> <p> <strong>Generic Skills</strong> </p> <ul> <li>Must be alert, strive for accuracy, and have ability to exercise independent thinking and judgment, be a self- motivator, and attention to detail.</li> <li>Displays cultural, gender, religion, race, nationality and age sensitivity and adaptability.</li> <li>Integrity, discretion, and loyalty.</li> <li>Flexible approach when working in a team, with skills to interpret and negotiate briefs.</li> </ul> <p> </p> <p> <strong>Position Location </strong> </p> <ul> <li>Based in Muscat Office.</li> </ul>

<p> <strong>Definition:</strong> </p> <p>Process Engineer is responsible for the study of production activities and preparation of proposals for improvements in processes, equipment, devices and methods, correction of manufacturing times for product components and the final product. Researches the best use of labor and raw materials. Analyzes and defines methods and work processes, study times and parameters, maps flow of activities and identifies failures in order to establish strategies to solve problems and propose continuous process improvement. Must have complete Higher Education Course (Production Engineering, Processes, Industrial)</p> <p> </p> <p> <strong>Overall, Purpose of the Role:</strong> </p> <p>Supports the Engineering Manager in the planning, optimization and implementation of industrial processes, monitoring the flow and performance indexes to identify opportunities for improvements and eliminate failures to achieve the results of volume, quality and cost. Study the productive activities and develop proposals for improvements in processes, equipment, devices and methods, factory layout, correction of product manufacturing times. It studies better ways to use labor, raw materials and other resources in the process. It is responsible for the production parameters, definition of processes, elaboration and development of procedures and work standards, using methods and equipment to elaborate and monitor the production processes.</p> <p>As a process specialist, you must work extensively on establishing and maintaining the process, promoting product requirements in accordance with ISO 9001: 2015 standards. You must have a good working knowledge of EMS and OSHA requirements.</p> <p>You must strive to continually improve using Lean tools to reduce costs and improve quality. Act independently at the organizational level. Results reviewed by the head of the organization. Decisions and results have an impact on the role and its success.</p> <p> </p> <p> </p> <p> <strong>Reporting To:</strong> </p> <p>Engineering Manager</p> <p> </p> <p> <strong>Key Responsibilities:</strong> </p> <p> <strong>GENERAL AND TASK MANAGEMENT:</strong> </p> <p> Develop, configure, and optimize industrial processes from the beginning to the startup and production certification.</p> <p> Evaluate processes, perform measurements, and interpret data.</p> <p> Design, execute, test and update systems and processes.</p> <p> Develop best practices, routines, and innovative solutions to improve production rates and quality.</p> <p> Perform process simulations.</p> <p> Manage cost and time restrictions.</p> <p> Conduct risk assessments.</p> <p> Formulate process documentation and operating instructions.</p> <p> Work with internal teams to increase customer satisfaction by improving the quality of the products.</p> <p> </p> <p> <strong>PEOPLE MANAGEMENT:</strong> </p> <p> Supervise and control resources effectively to support customer delivery requirements and Lean Manufacturing principles.</p> <p> Monitor and maintain the Process department's Absence Control Procedures to ensure maximum service levels.</p> <p> Dealing with personnel issues on the shift, including interaction with the Quality and Production team, in line with the Company's Policy and Agreements.</p> <p> Responsible for training material (work instructions) for product and process operators within the local team.</p> <p> Promote consistently high standards through personal examples and disseminate through the team so that each member of the team understands the standards and behaviors expected of them.</p> <p> Ensure that KPIs are met through work instructions, including management and reporting.</p> <p> Provide product experience within the team and answer the operator's questions.</p> <p> Work proactively with support functions to fully define the processes / procedures / controls relevant to the team's activities. Provide support and information for continuous improvement activities within the team.</p> <p> </p> <p> <strong>RELATIONSHIP MANAGEMENT</strong> </p> <p> Liaise and communicate with other departments and ensure an effective interface with is maintained</p> <p> Feedback to the Management team to share ideas and improve operation, recommending, supporting and implementing continuous improvement activities and process and procedure improvements to optimize results and improve quality of delivery, in line with quality standards requirements delivery in line with Company and Customer requirements</p> <p> </p> <p> <strong>SELF-MANAGEMENT</strong> </p> <p> Support, comply and ensure complicity with Health &amp; Safety regulations, the Company Handbook, Quality and Environmental standards, and all other Company policies and procedures.</p> <p> Embraces personal challenge.</p> <p> Confident, rounded thinking.</p> <p> Is self-aware.</p> <p> Is resilient, assertive, optimistic, and open to change.</p> <p> Engages interest and participation of others and has a collaborative approach to working with others.</p> <p> Actively Committed to team development.</p> <p> High levels of motivation and action orientated.</p> <p> Manage the work in accordance with the Karwa Motors processes</p> <p> </p> <p> <strong>Skills and Attributes:</strong> </p> <p> Chasing innovation in the assembly and manufacturing processes, seeking continuous improvement and the achievement of results</p> <p> Proven work experience in process engineering</p> <p> Excellent technical skills</p> <p> Knowledge of process related standards</p> <p> Experience in process simulations</p> <p> Working knowledge of process engineering software packages</p> <p> CAD or AutoCAD skills</p> <p> </p> <p> <strong>Qualifications and Experience Levels:</strong> </p> <p> Minimum 3~6 years experience in Automobile OEM at Process Engineering </p> <p> Bachelor s Degree or Diploma in Mechanical/Production or Automobile Engineering, Bachelor of Chemical Engineering</p> <p> Full expertise in CAD or 3D Software and Simulation of production</p> <p> Full expertise in manufacturing feasibility according to design and manufacturing center.</p> <p> Significant work experience in a high-volume manufacturing environment, preferably Bus industry</p> <p> Knowledge and understanding of Lean Manufacturing techniques.</p> <p> </p>

<p>Job title: Senior Engineer, Projects</p> <p>Stream: Operated Assets</p> <p>Function: Projects Delivery Off Plot Projects Well delivery Projects</p> <p>Location: Oman Muscat, Site. </p> <p>Budget control: *OPEX and/or CAPEX and/or Revenue amount as relevant*</p> <p>Reporting to: Manager, Well Delivery Projects</p> <p>Job purpose </p> <p>The purpose of the Senior Engineer Projects role is to lead and coordinate the end-to-end delivery of well hook-up, associated off-plot facilities, and assigned projects from engineering and procurement through construction, commissioning, handover, and closeout. The role ensures that projects are delivered safely, efficiently, and in accordance with approved engineering documents, Company standards, project priorities, quality requirements, budget, and schedule commitments. The position integrates multidisciplinary inputs and manages interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, contractors, consultants, vendors, and relevant authorities to achieve timely well delivery. It provides technical and project leadership in design assurance, tendering and contracting, materials and logistics coordination, risk and change management, contractor performance, cost and schedule control, mechanical completion, commissioning, punch-list closure, and final handover. Through proactive issue resolution, effective governance, and continuous improvement, the role safeguards technical integrity, operability, maintainability, and sustainable project outcomes that support production and business objectives.</p> <p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p>Main tasks and responsibilities </p> <p> Lead the end-to-end delivery of well hook-up, associated off-plot facilities and assigned projects, ensuring engineering, procurement, construction, commissioning, and handover activities are executed safely and efficiently in accordance with approved AFC documents, project priorities, quality, schedule, cost, and HSSE requirements.</p> <p> Establish and maintain integrated well-delivery plans covering resources, materials, inspections, construction, mechanical completion, pre-commissioning, commissioning, start-up support, punch-list closure, and final handover.</p> <p> Manage interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, project controls, contractors, consultants, vendors, and relevant authorities to remove constraints and achieve delivery milestones.</p> <p> Develop, baseline, and monitor project schedules, critical paths, milestones, budgets, commitments, forecasts, and costs; identify deviations and implement timely corrective, mitigation, and recovery actions.</p> <p> Verify contractor payment milestones and Value of Work Done (VOWD), support budget preparation and forecasting, and identify opportunities for cost optimization without compromising safety, quality, operability, or schedule.</p> <p> Identify and manage project risks, opportunities, delays, cost deviations, resource constraints, and interface dependencies; maintain relevant registers and ensure actions are assigned, tracked, and closed.</p> <p> Coordinate engineering design reviews and technical evaluations, ensuring compliance with the approved design basis, project specifications, company standards, regulatory requirements, and applicable international codes.</p> <p> Review and assure engineering deliverables and contractor or vendor submissions, including drawings, calculations, data sheets, material requisitions, technical proposals, method statements, procedures, and as-built documentation.</p> <p> Resolve technical queries, field engineering issues, design changes, non-conformances, and interface challenges throughout design, procurement, construction, commissioning, and handover; ensure changes are properly assessed, approved, documented, and controlled.</p> <p> Develop and coordinate tendering, contracting, and procurement activities from contracting strategy and scope development through bid evaluation, clarification, recommendation, and award, including management of long-lead items, inspections, expediting, and material delivery.</p> <p> Monitor contractor and vendor performance and compliance with technical, contractual, schedule, quality, and HSSE requirements; lead performance reviews and ensure deficiencies are addressed through sustainable corrective actions.</p> <p> Ensure construction readiness before mobilization by confirming approved work fronts, AFC documentation, permits, materials, resources, equipment, access, and stakeholder alignment.</p> <p> Participate in HAZOP, HAZID, constructability, operability and maintainability reviews, value engineering workshops, risk reviews, technical assurance activities, and project stage-gate reviews; ensure actions are tracked to closure.</p> <p> Coordinate quality surveillance, inspections, testing, mechanical completion, system handover, commissioning readiness, and acceptance of completion dossiers in collaboration with QA/QC, Operations, and commissioning teams.</p> <p> Ensure compliance with permit-to-work, SIMOPS, tie-in, shutdown, isolation, and live-facility requirements, where applicable, in coordination with Operations and HSSE.</p> <p> Prepare and present accurate project reports, dashboards, performance updates, forecasts, recovery plans, and lessons learned for management and key stakeholders; promptly escalate critical risks and decisions.</p> <p> Maintain effective project governance, including action tracking, decision logs, risk and opportunity registers, change control, interface registers, and records required for assurance, audit, and closeout.</p> <p> Ensure timely project closeout, including punch-list completion, as-built documentation, operating and maintenance manuals, spares, training, final accounts support, handover certificates, records retention, and lessons learned.</p> <p> Promote standardization, value improvement, constructability, digital engineering, and effective use of project-control systems to improve well-delivery efficiency, predictability, and quality.</p> <p> Provide technical guidance and coaching to project team members and share lessons learned and good practices across the well-delivery portfolio.</p> <p> Perform any other duties assigned by the Manager that are consistent with the role's scope and organizational requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Education requirements: Bachelor's degree in Mechanical, Chemical, Electrical, or Process Engineering, or a related engineering discipline Professional certifications such as Chartered Engineer (CEng) or Project Management Professional (PMP) are considered an advantage.</p> <p>Language requirements : Excellent knowledge of written, read, and spoken English (required)</p> <p> Minimum of 6 years of relevant engineering experience with a Bachelor's degree.</p> <p> Demonstrated experience in project execution, including concept, detailed engineering, construction, and commissioning phases.</p> <p> Proven track record of working within multidisciplinary project teams covering civil, mechanical, electrical, instrumentation, and process engineering disciplines.</p> <p> Solid exposure to project engineering standards, specifications, and international codes such as API, ASME, IEC, and relevant national regulatory requirements.</p> <p> Experience in contractor and vendor management, including, tender strategy, technical bid evaluation, design review, and engineering deliverable assurance.</p> <p> Familiarity with project management methodologies, stage-gate processes, and project controls including cost estimation, scheduling, and risk management.</p> <p> Familiarity with engineering tools and systems such as AutoCAD, PDMS/E3D, or equivalent design and drafting platforms relevant to Oil &amp; Gas projects.</p> <p> Experience interfacing with operations, HSSE, and asset integrity teams to ensure engineering solutions meet safety, operability, and maintainability requirements.</p> <p> Exposure to brownfield or greenfield project environments, with an understanding of tie-in management, shutdowns, and live plant constraints considered an advantage.</p> <p>Behavioural Competencies:</p> <ul><li><p>Cross-Functional Collaboration &amp; Teamwork</p></li><li><p>Stakeholder Communication &amp; Influencing</p></li><li><p>Analytical Thinking &amp; Complex Problem-Solving</p></li><li><p>Technical Leadership &amp; Decision-Making</p></li><li><p>Adaptability &amp; Resilience Under Pressure</p></li><li><p>Attention to Detail &amp; Quality Orientation</p></li><li><p>Conflict Resolution &amp; Negotiation</p></li><li><p>Planning, Prioritization &amp; Time Management</p></li><li><p>Initiative &amp; Continuous Improvement Mindset</p></li></ul><p>Technical Competencies: </p> <ul><li><p>Experience in Project Execution Project Planning, Scheduling &amp; Critical Path Management </p></li><li><p>Strong knowledge of international engineering codes &amp; standards (e.g., API, ASME, IEC)</p></li><li><p>Proficiency in technical bid evaluation, vendor document review &amp; engineering assurance</p></li><li><p>Working knowledge of project controls tools for cost estimation, scheduling &amp; risk management</p></li><li><p>Competence in change management &amp; stage-gate project delivery methodologies</p></li><li><p>Familiarity with HAZOP, constructability review &amp; value engineering workshop facilitation</p></li><li><p>SAP ERP and Project Management Systems </p></li><li><p>Aware in 3D plant design software </p></li></ul>

<p><br></p> <p> <strong>Job purpose </strong> </p> <p> <strong> </strong> </p> <p>The purpose of the Senior Engineer Projects role is to lead and coordinate the end-to-end delivery of well hook-up, associated off-plot facilities, and assigned projects from engineering and procurement through construction, commissioning, handover, and closeout. The role ensures that projects are delivered safely, efficiently, and in accordance with approved engineering documents, Company standards, project priorities, quality requirements, budget, and schedule commitments. The position integrates multidisciplinary inputs and manages interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, contractors, consultants, vendors, and relevant authorities to achieve timely well delivery. It provides technical and project leadership in design assurance, tendering and contracting, materials and logistics coordination, risk and change management, contractor performance, cost and schedule control, mechanical completion, commissioning, punch-list closure, and final handover. Through proactive issue resolution, effective governance, and continuous improvement, the role safeguards technical integrity, operability, maintainability, and sustainable project outcomes that support production and business objectives.</p> <p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p>Main tasks and responsibilities </p> <p> </p> <ul> <li>Lead the end-to-end delivery of well hook-up, associated off-plot facilities and assigned projects, ensuring engineering, procurement, construction, commissioning, and handover activities are executed safely and efficiently in accordance with approved AFC documents, project priorities, quality, schedule, cost, and HSSE requirements.</li> <li>Establish and maintain integrated well-delivery plans covering resources, materials, inspections, construction, mechanical completion, pre-commissioning, commissioning, start-up support, punch-list closure, and final handover.</li> <li>Manage interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, project controls, contractors, consultants, vendors, and relevant authorities to remove constraints and achieve delivery milestones.</li> <li>Develop, baseline, and monitor project schedules, critical paths, milestones, budgets, commitments, forecasts, and costs; identify deviations and implement timely corrective, mitigation, and recovery actions.</li> <li>Verify contractor payment milestones and Value of Work Done (VOWD), support budget preparation and forecasting, and identify opportunities for cost optimization without compromising safety, quality, operability, or schedule.</li> <li>Identify and manage project risks, opportunities, delays, cost deviations, resource constraints, and interface dependencies; maintain relevant registers and ensure actions are assigned, tracked, and closed.</li> <li>Coordinate engineering design reviews and technical evaluations, ensuring compliance with the approved design basis, project specifications, company standards, regulatory requirements, and applicable international codes.</li> <li>Review and assure engineering deliverables and contractor or vendor submissions, including drawings, calculations, data sheets, material requisitions, technical proposals, method statements, procedures, and as-built documentation.</li> <li>Resolve technical queries, field engineering issues, design changes, non-conformances, and interface challenges throughout design, procurement, construction, commissioning, and handover; ensure changes are properly assessed, approved, documented, and controlled.</li> <li>Develop and coordinate tendering, contracting, and procurement activities from contracting strategy and scope development through bid evaluation, clarification, recommendation, and award, including management of long-lead items, inspections, expediting, and material delivery.</li> <li>Monitor contractor and vendor performance and compliance with technical, contractual, schedule, quality, and HSSE requirements; lead performance reviews and ensure deficiencies are addressed through sustainable corrective actions.</li> <li>Ensure construction readiness before mobilization by confirming approved work fronts, AFC documentation, permits, materials, resources, equipment, access, and stakeholder alignment.</li> <li>Participate in HAZOP, HAZID, constructability, operability and maintainability reviews, value engineering workshops, risk reviews, technical assurance activities, and project stage-gate reviews; ensure actions are tracked to closure.</li> <li>Coordinate quality surveillance, inspections, testing, mechanical completion, system handover, commissioning readiness, and acceptance of completion dossiers in collaboration with QA/QC, Operations, and commissioning teams.</li> <li>Ensure compliance with permit-to-work, SIMOPS, tie-in, shutdown, isolation, and live-facility requirements, where applicable, in coordination with Operations and HSSE.</li> <li>Prepare and present accurate project reports, dashboards, performance updates, forecasts, recovery plans, and lessons learned for management and key stakeholders; promptly escalate critical risks and decisions.</li> <li>Maintain effective project governance, including action tracking, decision logs, risk and opportunity registers, change control, interface registers, and records required for assurance, audit, and closeout.</li> <li>Ensure timely project closeout, including punch-list completion, as-built documentation, operating and maintenance manuals, spares, training, final accounts support, handover certificates, records retention, and lessons learned.</li> <li>Promote standardization, value improvement, constructability, digital engineering, and effective use of project-control systems to improve well-delivery efficiency, predictability, and quality.</li> <li>Provide technical guidance and coaching to project team members and share lessons learned and good practices across the well-delivery portfolio.</li> <li>Perform any other duties assigned by the Manager that are consistent with the role's scope and organizational requirements.</li> </ul> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Education requirements</strong> </p> <p>Bachelor's degree in Mechanical, Chemical, Electrical, or Process Engineering, or a related engineering discipline Professional certifications such as Chartered Engineer (CEng) or Project Management Professional (PMP) are considered an advantage.</p> <p> <strong>Language requirements </strong> </p> <p>Excellent knowledge of written, read, and spoken English (required)</p> <p> <strong>Background and experience</strong> </p> <p> <strong>Competencies and skills</strong> </p> <p> Minimum of 6 years of relevant engineering experience with a Bachelor's degree.<br> Demonstrated experience in project execution, including concept, detailed engineering, construction, and commissioning phases.<br> Proven track record of working within multidisciplinary project teams covering civil, mechanical, electrical, instrumentation, and process engineering disciplines.<br> Solid exposure to project engineering standards, specifications, and international codes such as API, ASME, IEC, and relevant national regulatory requirements.<br> Experience in contractor and vendor management, including, tender strategy, technical bid evaluation, design review, and engineering deliverable assurance.<br> Familiarity with project management methodologies, stage-gate processes, and project controls including cost estimation, scheduling, and risk management.<br> Familiarity with engineering tools and systems such as AutoCAD, PDMS/E3D, or equivalent design and drafting platforms relevant to Oil &amp; Gas projects.<br> Experience interfacing with operations, HSSE, and asset integrity teams to ensure engineering solutions meet safety, operability, and maintainability requirements.<br> Exposure to brownfield or greenfield project environments, with an understanding of tie-in management, shutdowns, and live plant constraints considered an advantage.</p> <p>Behavioural Competencies:</p> <p> Cross-Functional Collaboration &amp; Teamwork<br> Stakeholder Communication &amp; Influencing<br> Analytical Thinking &amp; Complex Problem-Solving<br> Technical Leadership &amp; Decision-Making<br> Adaptability &amp; Resilience Under Pressure<br> Attention to Detail &amp; Quality Orientation<br> Conflict Resolution &amp; Negotiation<br> Planning, Prioritization &amp; Time Management<br> Initiative &amp; Continuous Improvement Mindset</p> <p>Technical Competencies: </p> <p> Experience in Project Execution Project Planning, Scheduling &amp; Critical Path Management <br> Strong knowledge of international engineering codes &amp; standards (e.g., API, ASME, IEC)<br> Proficiency in technical bid evaluation, vendor document review &amp; engineering assurance<br> Working knowledge of project controls tools for cost estimation, scheduling &amp; risk management<br> Competence in change management &amp; stage-gate project delivery methodologies<br> Familiarity with HAZOP, constructability review &amp; value engineering workshop facilitation<br> SAP ERP and Project Management Systems <br> Aware in 3D plant design software</p> <p> </p>

<p><br></p> <p> <strong>Job purpose </strong> </p> <p> <strong> </strong> </p> <p>The purpose of the Senior Engineer Projects role is to lead and coordinate the end-to-end delivery of well hook-up, associated off-plot facilities, and assigned projects from engineering and procurement through construction, commissioning, handover, and closeout. The role ensures that projects are delivered safely, efficiently, and in accordance with approved engineering documents, Company standards, project priorities, quality requirements, budget, and schedule commitments. The position integrates multidisciplinary inputs and manages interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, contractors, consultants, vendors, and relevant authorities to achieve timely well delivery. It provides technical and project leadership in design assurance, tendering and contracting, materials and logistics coordination, risk and change management, contractor performance, cost and schedule control, mechanical completion, commissioning, punch-list closure, and final handover. Through proactive issue resolution, effective governance, and continuous improvement, the role safeguards technical integrity, operability, maintainability, and sustainable project outcomes that support production and business objectives.</p> <p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p>Main tasks and responsibilities </p> <p> </p> <ul> <li>Lead the end-to-end delivery of well hook-up, associated off-plot facilities and assigned projects, ensuring engineering, procurement, construction, commissioning, and handover activities are executed safely and efficiently in accordance with approved AFC documents, project priorities, quality, schedule, cost, and HSSE requirements.</li> <li>Establish and maintain integrated well-delivery plans covering resources, materials, inspections, construction, mechanical completion, pre-commissioning, commissioning, start-up support, punch-list closure, and final handover.</li> <li>Manage interfaces among Operations, Subsurface, Drilling, Asset Integrity, Engineering, Construction, Procurement, QA/QC, HSSE, project controls, contractors, consultants, vendors, and relevant authorities to remove constraints and achieve delivery milestones.</li> <li>Develop, baseline, and monitor project schedules, critical paths, milestones, budgets, commitments, forecasts, and costs; identify deviations and implement timely corrective, mitigation, and recovery actions.</li> <li>Verify contractor payment milestones and Value of Work Done (VOWD), support budget preparation and forecasting, and identify opportunities for cost optimization without compromising safety, quality, operability, or schedule.</li> <li>Identify and manage project risks, opportunities, delays, cost deviations, resource constraints, and interface dependencies; maintain relevant registers and ensure actions are assigned, tracked, and closed.</li> <li>Coordinate engineering design reviews and technical evaluations, ensuring compliance with the approved design basis, project specifications, company standards, regulatory requirements, and applicable international codes.</li> <li>Review and assure engineering deliverables and contractor or vendor submissions, including drawings, calculations, data sheets, material requisitions, technical proposals, method statements, procedures, and as-built documentation.</li> <li>Resolve technical queries, field engineering issues, design changes, non-conformances, and interface challenges throughout design, procurement, construction, commissioning, and handover; ensure changes are properly assessed, approved, documented, and controlled.</li> <li>Develop and coordinate tendering, contracting, and procurement activities from contracting strategy and scope development through bid evaluation, clarification, recommendation, and award, including management of long-lead items, inspections, expediting, and material delivery.</li> <li>Monitor contractor and vendor performance and compliance with technical, contractual, schedule, quality, and HSSE requirements; lead performance reviews and ensure deficiencies are addressed through sustainable corrective actions.</li> <li>Ensure construction readiness before mobilization by confirming approved work fronts, AFC documentation, permits, materials, resources, equipment, access, and stakeholder alignment.</li> <li>Participate in HAZOP, HAZID, constructability, operability and maintainability reviews, value engineering workshops, risk reviews, technical assurance activities, and project stage-gate reviews; ensure actions are tracked to closure.</li> <li>Coordinate quality surveillance, inspections, testing, mechanical completion, system handover, commissioning readiness, and acceptance of completion dossiers in collaboration with QA/QC, Operations, and commissioning teams.</li> <li>Ensure compliance with permit-to-work, SIMOPS, tie-in, shutdown, isolation, and live-facility requirements, where applicable, in coordination with Operations and HSSE.</li> <li>Prepare and present accurate project reports, dashboards, performance updates, forecasts, recovery plans, and lessons learned for management and key stakeholders; promptly escalate critical risks and decisions.</li> <li>Maintain effective project governance, including action tracking, decision logs, risk and opportunity registers, change control, interface registers, and records required for assurance, audit, and closeout.</li> <li>Ensure timely project closeout, including punch-list completion, as-built documentation, operating and maintenance manuals, spares, training, final accounts support, handover certificates, records retention, and lessons learned.</li> <li>Promote standardization, value improvement, constructability, digital engineering, and effective use of project-control systems to improve well-delivery efficiency, predictability, and quality.</li> <li>Provide technical guidance and coaching to project team members and share lessons learned and good practices across the well-delivery portfolio.</li> <li>Perform any other duties assigned by the Manager that are consistent with the role's scope and organizational requirements.</li> </ul> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Education requirements</strong> </p> <p>Bachelor's degree in Mechanical, Chemical, Electrical, or Process Engineering, or a related engineering discipline Professional certifications such as Chartered Engineer (CEng) or Project Management Professional (PMP) are considered an advantage.</p> <p> <strong>Language requirements </strong> </p> <p>Excellent knowledge of written, read, and spoken English (required)</p> <p> <strong>Background and experience</strong> </p> <p> <strong>Competencies and skills</strong> </p> <p> Minimum of 6 years of relevant engineering experience with a Bachelor's degree.<br> Demonstrated experience in project execution, including concept, detailed engineering, construction, and commissioning phases.<br> Proven track record of working within multidisciplinary project teams covering civil, mechanical, electrical, instrumentation, and process engineering disciplines.<br> Solid exposure to project engineering standards, specifications, and international codes such as API, ASME, IEC, and relevant national regulatory requirements.<br> Experience in contractor and vendor management, including, tender strategy, technical bid evaluation, design review, and engineering deliverable assurance.<br> Familiarity with project management methodologies, stage-gate processes, and project controls including cost estimation, scheduling, and risk management.<br> Familiarity with engineering tools and systems such as AutoCAD, PDMS/E3D, or equivalent design and drafting platforms relevant to Oil &amp; Gas projects.<br> Experience interfacing with operations, HSSE, and asset integrity teams to ensure engineering solutions meet safety, operability, and maintainability requirements.<br> Exposure to brownfield or greenfield project environments, with an understanding of tie-in management, shutdowns, and live plant constraints considered an advantage.</p> <p>Behavioural Competencies:</p> <p> Cross-Functional Collaboration &amp; Teamwork<br> Stakeholder Communication &amp; Influencing<br> Analytical Thinking &amp; Complex Problem-Solving<br> Technical Leadership &amp; Decision-Making<br> Adaptability &amp; Resilience Under Pressure<br> Attention to Detail &amp; Quality Orientation<br> Conflict Resolution &amp; Negotiation<br> Planning, Prioritization &amp; Time Management<br> Initiative &amp; Continuous Improvement Mindset</p> <p>Technical Competencies: </p> <p> Experience in Project Execution Project Planning, Scheduling &amp; Critical Path Management <br> Strong knowledge of international engineering codes &amp; standards (e.g., API, ASME, IEC)<br> Proficiency in technical bid evaluation, vendor document review &amp; engineering assurance<br> Working knowledge of project controls tools for cost estimation, scheduling &amp; risk management<br> Competence in change management &amp; stage-gate project delivery methodologies<br> Familiarity with HAZOP, constructability review &amp; value engineering workshop facilitation<br> SAP ERP and Project Management Systems <br> Aware in 3D plant design software</p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Professional Pastry Designer – Oman</strong></p><br><p><strong>Salary Package: Negotiable + Accommodation + Transport + Meals</strong></p><br><p>We’re seeking a creative Pastry Designer with a passion for exquisite desserts, artistic presentation, and exceptional craftsmanship to create unforgettable culinary experiences.</p><br><ul> <li>Craft exquisite pastries, signature desserts, luxury cakes, and confectionery.</li><li>Create bespoke designs for VIP guests, celebrations, and exclusive events.</li><li>Innovate with exciting flavours, textures, and contemporary pastry techniques.</li><li>Deliver flawless quality, presentation, and consistency.</li><li>Maintain the highest standards of hygiene, freshness, and kitchen excellence.</li><li>Minimum 5 years of professional pastry experience.</li><li>Exceptional cake decoration, pastry, and confectionery skills.</li><li>Creativity, precision, and a strong artistic flair.</li><li>Luxury hospitality or high-end pastry experience preferred.</li><li>A collaborative spirit and passion for excellence.</li></ul> <p><strong>Get in touch: gail@corecruitment.com</strong></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>UX/UI Designer F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Embarquement immédiat pour un voyage aux confins du digital ! <br>La Direction du Système d'Information (DSI) de Safran Aircraft Engines est au cœur d'une transformation ambitieuse. Notre mission est d'accompagner notre croissance industrielle soutenue et les défis sociétaux de notre temps. La Digital Factory, véritable moteur de cette transformation digitale, a pour objectif de créer et de délivrer des produits et services innovants en exploitant des technologies de pointe. <br>Dans le cadre de notre développement, nous recherchons un(e) UX / UI Designer passionné(e) et talentueux(se) pour rejoindre notre équipe. <br>Vos principales missions :<br>- Comprendre les enjeux métiers, les besoins utilisateurs et les contraintes techniques afin de concevoir des produits utiles, utilisables et performants. <br>- Mener ou contribuer aux activités de recherche utilisateur : entretiens, observations terrain, ateliers et tests utilisateurs. <br>- Traduire les enseignements de la recherche en parcours, wireframes, prototypes et interfaces concrètes. <br>- Challenger les besoins exprimés et identifier les opportunités d'amélioration de l'expérience utilisateur. <br>- Concevoir des interfaces ergonomiques, cohérentes, accessibles et respectueuses des principes d'éco-conception. <br>- Garantir la qualité des livrables UX/UI et accompagner les développeurs jusqu'à l'implémentation des solutions. <br>- Définir et suivre des indicateurs UX qualitatifs et quantitatifs afin de mesurer l'impact et le ROI du Design. <br>- Contribuer à la construction, à la documentation, à la gouvernance et à l'adoption du Design System. <br>- Collaborer étroitement avec les Product Owners, développeurs, experts métiers et acteurs de l'Agilité, au sein des Trains SAFe ou des projets hors Train. <br>- Participer à la montée en maturité Design de l'organisation à travers l'animation d'ateliers, le partage de bonnes pratiques, la veille et l'expérimentation de nouveaux outils, notamment liés à l'IA. </p><br><br><p>Si vous souhaitez relever ce défi passionnant et contribuer à la transformation digitale de Safran Aircraft Engines, rejoignez-nous ! </p><br><br><p>Parlons de vous :<br>- Vous justifiez d'au moins 5 ans d'expérience en tant que Product Designer ou UX/UI Designer. <br>- Vous maîtrisez la conception de produits digitaux de bout en bout, du cadrage à l'accompagnement de la mise en production. <br>- Vous possédez une solide maîtrise des méthodes UX : recherche utilisateur, atelier Design Thinking, parcours, wireframes, prototypage et tests utilisateurs. <br>- Vous disposez de compétences confirmées en UI Design et concevez des interfaces ergonomiques, cohérentes et accessibles. <br>- Vous avez une expérience significative dans l'utilisation, la contribution, la structuration ou l'évolution d'un Design System. <br>- Vous maîtrisez Figma, notamment les composants, bibliothèques, variables, prototypes et fonctionnalités collaboratives. <br>- Vous comprenez les contraintes du développement Front-End et savez collaborer efficacement avec les développeurs pour garantir la faisabilité et la qualité d'implémentation. <br>- Vous êtes à l'aise dans des environnements complexes, idéalement au sein d'un grand groupe, d'une DSI, d'une Digital Factory ou sur des produits B2B, B2E ou industriels. <br>- Vous savez animer des ateliers, faciliter les échanges, convaincre les parties prenantes et travailler au sein d'équipes pluridisciplinaires en environnement Agile, Scrum ou SAFe. <br>- Vous êtes sensible aux enjeux d'accessibilité RGAA/WCAG, d'éco-conception, d'UX Writing, de data visualisation et aux nouveaux usages liés à l'IA générative, aux chatbots et aux produits IA. </p><br><br><br> </div>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description: </p><p><br></p><p>We seek a talented, detail-oriented draftsman, kitchen, or interior designer to join our team. In this role, you will be responsible for creating meticulous kitchen designs, preparing drawings for manufacturing, compiling comprehensive sheets of quantity, and ensuring the accurate placement of electrical, water, and gas connections. The ideal candidate will have a strong background in drafting, exceptional design skills, and the ability to coordinate effectively with various stakeholders to ensure all technical aspects are addressed.</p><p><br></p><p>Responsibilities: </p><p>· Collaborate with clients to understand their specific requirements and preferences for kitchen designs.</p><p>· Utilize CAD software to create detailed drawings of kitchen layouts, including floor plans, elevations, and sections.</p><p>· Ensure that kitchen designs comply with building codes, regulations, and safety standards.</p><p>· Coordinate with electrical, plumbing, and gas professionals to determine optimal placement for connections and fixtures.</p><p>· Prepare comprehensive sheets of quantity, detailing materials, dimensions, and specifications for procurement and construction purposes.</p><p>· Work closely with manufacturing teams to translate designs into production-ready drawings.</p><p>· Revise drawings and specifications based on feedback from clients, architects, and engineers.</p><p>· Stay updated on industry trends, advancements, and best practices in kitchen design and construction.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements: </p><p>· Bachelor's degree or equivalent experience in architecture, interior design, or a related field.</p><p>· A minimum of 3 years’ experience as a draftsman or kitchen designer, with a strong portfolio demonstrating previous projects.</p><p>· Proficiency in CAD software, such as AutoCAD or similar programs.</p><p>· Excellent technical skills, with a keen eye for detail and accuracy.</p><p>· Strong knowledge of building codes, regulations, and technical requirements related to kitchen design.</p><p>· Ability to effectively coordinate with various professionals, including electricians, plumbers, and contractors.</p><p>· Experience in preparing sheets of quantity and coordinating technical aspects of kitchen projects.</p><p>· Effective communication, collaboration, and problem-solving skills.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> URGENT HIRING – Join Our Team....</p><p>Leading Advertising company in Oman is looking for talented&nbsp;</p><p>Individuals to join our team.</p><p>&nbsp;(Priority to applicants currently residing in Oman)</p><p><br></p><p>️⭕Graphic designer(Candidate with work experience in digital printing press preferred)&nbsp;</p><p><br></p><p><br></p><p>⭕ Priority for candidates with work experience in Digital printing &amp; Service ( Designing exhibition stalls, printing in routers and CNC)</p><p>&nbsp; Ruwi</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Adobe Illustrator , Photoshop &amp; CorelDraw Required</p><p>Experienced in Digital printing &amp; Service ( Designing exhibition stalls, printing in routers and CNC)</p></div>

<p>Design and develop custom outfits as per client requirements and preferences. Assist clients with fabric selection, styling, and fitting consultations. Coordinate with tailors to ensure proper stitching, finishing, and quality standards. Stay updated with current fashion trends and incorporate them into designs. Maintain high standards of professionalism and client confidentiality. Work independently while managing client expectations and timelines.</p><p><strong>Desired Candidate Profile</strong></p><p>Proven experience as a Fashion Designer. Strong knowledge of fabrics, styling, and garment construction. Excellent communication and interpersonal skills. Presentable personality with a professional attitude. Ability to work independently and handle clients confidently.</p>

<br><p><strong>Scope: </strong>Men's fashion, women's fashion oversight, traditional wear, footwear, luggage, bags and accessories, cosmetics, health and beauty products</p><br><ul><li><p>Develop seasonal collection architecture by customer, gender, category, style, colour, size and price point.</p></li><li><p>Define opening-price, core, premium and statement products.</p></li><li><p>Build seasonal buying calendars and monitor GCC/Oman consumer trends.</p></li><li><p>Source manufacturers, brands and suppliers locally and internationally.</p></li><li><p>Negotiate cost, MOQ, lead times, payment terms and commercial support.</p></li><li><p>Work with Designer on product development, samples and approvals.</p></li><li><p>Work with Planner on OTB and seasonal inventory.</p></li><li><p>Analyse sell-through by SKU/style/size/colour and identify repeat opportunities.</p></li><li><p>Control markdown, broken sizes, seasonal ageing and exit strategies.</p></li><li><p>Conduct competitor and price benchmarking.</p></li><li><p>Own Sales, GP%, Margin, Sell-through and Stock Turn.</p></li><li><p>Build exclusive/private-label opportunities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Minimum 5 years of fashion/lifestyle buying or category-management experience.</p></li><li><p>Strong apparel/lifestyle merchandising background.</p></li><li><p>GCC experience preferred.</p></li><li><p>Must understand OTB, seasonal buying, sell-through, markdown and size/colour planning.</p></li><li><p>Strong product sense and commercial judgement.</p></li><li><p>Own-brand/product-development experience highly desirable.</p></li><li><p>Knowledge on Omani traditional life style wears highly desirable</p></li></ul><br><p><strong>Core KPIs</strong></p><p> Sales • GP% • Full-price Sell-through • Markdown % • Stock Turn • Seasonal Ageing • Range Productivity • OTB Adherence </p>

<p>Draftsman- Aluminum - Basic Job Responsibilities- Thorough study and knowledge of scope of work before generating shop drawings. Preparation of shop drawings (elevations, plans, sections, details and layout drawings), aluminum fabrication drawings. Drawing Details to be discussed and verified internally prior to generating shop drawings Preparation of Aluminum cutting list, Curtain wall &amp; glass fabrication cutting list Prepare material take off (MTO) &amp; raise material request sheet (MRS) when required Preparation of As-Built drawings Knowledge in aluminum system like Technal, Gulf Extrusions, Reynears, Arexal,Smart, Napco, Arabian etc. Consultant comments on shop drawings and transmittals to be carefully studied and scope related comments to be highlighted to the line manager before commencing shop drawings revision. Shop drawings shall be carefully reviewed prior to submission to avoid variance with scope or consultant comments. Perform quantity take off when required to assist estimation, site &amp; procurement teams Technical communications with structural designer and suppliers, In every project. Complete and clear shop drawings schedule shall be maintained and updated with every revision.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience : Candidates must have a minimum of 4 years with design and drafting within the construction industry - Qualification : Diploma or Equivalent - Skills : Candidates should possess very good knowledge of AutoCAD.</p>

<p> <strong>Main Role (Overall accountability):</strong> </p> <p>We are seeking to recruit a certified and talented UI Expert to continuously conduct a thorough analysis of our channels UI/UX and propose changes in line with global trends and meeting the demand of the customers specifically the Tec savy customers.</p> <p>The focus is on all front-end touch points including</p> <p>Mobile banking apps, Internet Banking, Phygital network and alternative channels like Tablet. The ideal candidate has to have at least 10 years of experience of designing and providing advisory to organizations on the right design approach relevant to the channel.</p> <p>The candidate will have to work with developer</p> <p>and designer to guide them on how to achieve the best user experience. It is important to clarify that this job is not aimed at UI/UX designers rather an advisor who can provide guidance to the designers on the best design approach.</p> <p> <strong>Principal Accountabilities:</strong> </p> <p>Research and evaluate the digital products UX basics like information architecture and usability testing to content creation and business modeling.</p> <p>o Assist and guide on design research, ensuring usability of the design to customers</p> <p>o AUX consultant assesses and refines digital products to ensure they are user-friendly and meet business objectives.</p> <p>o They conduct in-depth user research, perform usability testing, and analyze data to identify pain points and areas for improvement.</p> <p>o AUX consultant assesses and refines digital products to ensure they are user-friendly and meet business objectives.</p> <p>o They conduct in-depth user research, perform usability testing, and analyze data to identify pain points and areas for improvement.</p> <p>o Provide guidance to the designers to design and maintain high-quality user interfaces for web and mobile platforms.</p> <p>o Collaborate with product managers, UX designers, and developers to ensure design feasibility.</p> <p>o Create and manage design systems, style guides, and component libraries.</p> <p>Optimize designs for responsiveness and performance across various devices.</p> <p>Stay updated on Ul design trends, tools, and best practices.</p> <p>o Ensure consistency and alignment with branding guidelines.</p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Personnel Specifications:</strong> </p> <p>A minimum 15 years of experience advising organizations on the right design approach</p> <p>o Bachelor's degree in Graphic Design, Design Thinking, Human-Computer Interaction, or related fields.</p> <p>Proficiency with design tools such as Figma, Sketch, Adobe D, or similar software.</p> <p>o Strong understanding of visual hierarchy, typography, and color theory-</p> <p>Familiarity with front-end development technologies (HTML, CSS, JavaScript) is a plus.</p> <p>Excellent communication and problem-solving skills.</p> <p>A portfolio showcasing previous Ul projects is required.</p>

<b>Role Objective: </b><br> <br> To develop and deliver high-quality creative concepts and visual communications that strengthen SalamAir's brand identity and support its marketing and commercial objectives across the network. The role is responsible for translating marketing briefs into effective visual solutions across digital, print and physical brand touchpoints, ensuring consistency with brand guidelines and maintaining high standards of creativity, accuracy and execution.<br> The role also provides design support for corporate events, exhibitions and brand activations, working closely with the designated Events personnel and relevant stakeholders.<br> <br> <b>Duties and Responsibilities: </b><br> <br> a) Creative Design and Development<br> <br> Develop creative concepts and design marketing materials, including campaign artwork, advertisements, brochures, promotional collateral, presentations, newsletters, infographics and digital assets.<br> <br> Create visual content for brand campaigns, route launches, destination marketing, product promotions, ancillary products and other commercial initiatives.<br> <br> Adapt creative concepts across digital, print and large-format applications while maintaining visual consistency and quality.<br> <br> b) Brand Identity and Governance<br> <br> Ensure consistent application of SalamAir's brand identity and guidelines across all marketing materials and customer-facing touchpoints.<br> <br> Review artwork produced by internal stakeholders, external agencies and suppliers to ensure compliance with brand standards.<br> <br> Maintain and organise approved brand assets, templates and artwork files, providing guidance on the correct use of brand elements where required.<br> <br> Ensure appropriate use of licensed images, fonts and other creative assets in accordance with copyright requirements.<br> <br> c) Digital and Campaign Support<br> <br> Develop creative assets for websites, social media, email marketing, online advertising and other digital channels.<br> <br> Collaborate with the Marketing team and relevant departments to translate campaign objectives and commercial requirements into effective visual communications.<br> <br> Ensure all creative materials accurately reflect approved messaging, promotional offers and product information.<br> <br> Recommend innovative creative approaches to enhance campaign effectiveness, customer engagement and brand recognition.<br> <br> d) Event and Exhibition Design Support<br> <br> Design event-related materials, including backdrops, invitations, stage graphics, signage, presentation templates, exhibition displays and promotional collateral.<br> <br> Ensure all event-related designs align with SalamAir's brand guidelines and approved creative direction.<br> <br> Prepare production-ready artwork and review proofs or samples to ensure quality and accuracy.<br> <br> Coordinate design requirements with the designated Events personnel and relevant stakeholders, ensuring timely delivery of creative assets.<br> <br> Event planning, logistics, supplier management and on-site execution are the responsibility of the designated Events personnel.<br> <br> e) Design Production and Quality Control<br> <br> Prepare accurate, production-ready artwork for print, digital and large-format applications, adhering to technical specifications and quality standards.<br> <br> Liaise with external agencies, printers and creative suppliers on design-related requirements, artwork preparation and production quality.<br> <br> Review proofs and final artwork to identify errors, maintain quality and minimise unnecessary revisions or production costs.<br> <br> Maintain organised records of completed designs, approved artwork and creative assets.<br> <br> f) Project Management and Collaboration <br> <br> Manage design assignments from concept development through revisions, approval and final delivery, ensuring deadlines and quality standards are met. <br> <br> Work closely with the Head of Marketing, Marketing team and internal stakeholders to understand briefs, provide creative recommendations and deliver effective design solutions. <br> <br> Manage competing priorities effectively, communicate progress and proactively address potential delivery challenges. <br> <br> Provide creative guidance and support to junior designers or other team members, where applicable. <br> <br> Undertake other relevant duties assigned by management within the scope of the role. <br> <br><p><strong>Desired Candidate Profile</strong></p><b>Education &amp; Experience: </b><br> <br> <ol style=""> <li style=""> Degree or Diploma in Graphic Designing <br> </li><li style=""> 6 years of significant work experience in similar field ( Events/ Graphic Designer) <br> </li><li style=""> Experience in Illustrator, Photoshop and InDesign, specifically with mockups, web design and multimedia presentation <br> <br> <br></li></ol>

<ul><li>Design and deliver engaging IT training programs, ensuring alignment with business objectives and skill gaps.</li><li>Assess training needs through consultations, surveys, and performance analysis, tailoring content for maximum impact.</li><li>Develop comprehensive training materials, including manuals, presentations, and online modules, using various learning platforms.</li><li>Conduct hands-on training sessions, workshops, and webinars, fostering a dynamic and interactive learning environment.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Computer Science, Information Technology, or a related field is preferred.</p></li><li><p>Possess relevant certifications, such as CompTIA, Microsoft Certified Trainer (MCT), or similar.</p></li><li><p>Minimum of 3-5 years of experience in IT training or a related role, demonstrating a track record of success.</p></li><li><p>Proven experience working in the technology sector, with a deep understanding of IT concepts and systems.<br>Proficient in English & Arabic language.</p></li></ul>

<ul><li>Develop and maintain strong relationships with clients through regular visits and follow-ups to understand their needs and preferences.</li><li>Conduct thorough market research to identify potential customers and emerging trends, ensuring a competitive edge in offerings.</li><li>Create persuasive sales presentations and demonstrations tailored to client specifications, showcasing product benefits effectively.</li><li>Negotiate contracts and pricing with clients, ensuring mutually beneficial agreements that drive sales and customer satisfaction.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Business, Marketing, or a related field, providing a solid foundation for sales strategies.</li><li>At least 3-5 years of proven experience in outdoor sales, demonstrating a successful track record in achieving sales targets.</li><li>Experience in the specific industry relevant to the company's products, ensuring familiarity with market dynamics.</li><li>Fluency in English and local language(s) to communicate effectively with a diverse clientele.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description</b></p><br> <p><b>Overall Objective and Responsibilities</b></p><br> <p><b>Job purpose</b></p><br> <ul><li>To action the Audit Plan and provide our clients with Knowledge and Business Solutions in their respective markets by decreasing risks and increasing revenue through KPMG audit methodologies.</li></ul> <p><b>Major duties and responsibilities</b></p><br> <ul><li>Complete the planning for the audit</li><li> Complete fieldwork and allocate work as appropriate to audit assistants</li><li> Coaching of audit assistants</li><li> Preparation of financial statements, transmittal letter and any other deliverables</li><li> Keeping manager / Partner informed of progress/issues on a job throughout the audit process</li><li> Responsible for getting Partner and manager reviews done</li><li> Completion documentation and follow up of outstanding information</li><li> Prepare and analyze costs on the WIP for their audits</li><li> Prepare fee note requisition on a timely basis and follow up collection of debtors</li><li> Maintaining good relationship with the client’s financial management</li><li> Overall in charge for medium and large sized clients</li><li> Attending stock counts and the follow up of the counts</li></ul> <p><b>Profile</b></p><br> <p><b>Education requirements:</b></p><br> <ul><li>B.Sc. in accounting or equivalent</li><li> Accounting qualification or equivalent (ACCA, CPA)</li><li> Technically sound, thorough knowledge of IFRS &amp; ISA</li></ul> <p><b>Work experience requirements:</b></p><br> <ul><li>3 years’ experience (Minimum 2 year post qualification experience)</li><li> Prior experience in dealing in clients involved in real estate, construction and related industries and oil &amp; gas sectors.</li><li> Hands on experience in advanced audit Methodologies</li></ul> <p><b>Knowledge / Technical Skills</b></p><br> <ol><li>Strong analytical skills.</li><li>Customer Focus</li><li>Mentors new team members</li></ol><p><b>Language skills</b></p><br> <p><b>Language Speaking Reading Writing Listening</b></p><br> <p>English Fluent Fluent Fluent Fluent</p><br> <p>Arabic Fluent Fluent Fluent Fluent</p><br> <p><b>Interpersonal skills</b></p><br> <ol><li>Proactive and independent person, with ability to initiate tasks independently</li><li>Researching skills- Identifies, documents and shares knowledge that might be useful to others</li><li>Excellent analytical skills- Identifies ways to analyze information quickly and efficiently</li><li>Proficient problem solver- Suggests innovative and creative solutions to problems</li><li>Effective communicator</li></ol> <p><b>Apply Before:</b> 31/10/2026</p><br><p>For further information, and to apply, please visit our website via the “Apply” button below.</p><br><br> </div>

<p>Planning and Executing and supervising all financial transactions at OQ8 including incoming and outgoing funds (treasury), financial analysis record-keeping, Insurance &amp; Compliance under VP Finance scope, acting as single point of accountability and team player of Treasury with direct accountability overs Treasury operations, Insurance and Compliance processes, ensuring the appropriate, changes, to enhance the quality or value in existing methods.</p><p>The position will act in accordance with OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities:</strong></p><p><strong>Treasury</strong></p><p>Monitoring cash functions, including cash positioning, cash reporting and forecasting, short-term investing and borrowing, wire payments, fraud prevention, FX management and hedging, bank account setup and maintenance, bank relationship management, liquidity management, foreign currency exposure and foreign currency payments.</p><p>Financial reporting requirements such as finance loan, cost report, and monitoring debts drawdown, equity cash call, debt repayment and interest payment. This includes the execution of a timely/accurate reporting of cash flow reports required by the Chief Financial Officer for review of fund position.</p><p>Preparing &amp; monitoring all OQ8 Finance Debt Cost Budget &amp; Interest cost management.</p><p>Ensure all debt and capital related transactions are completed in a timely and accurate manner (e.g., equity cash calls, debt drawdowns, principal payments, interest payments, fees related to facilities</p><p>Administration of the treasury operations and transaction in respect of cash and the management of all OQ8 bank accounts,</p><p>Lead the execution of FX currency transactions.</p><p>Place fixed deposits.</p><p>Ensures timely availability of funding to cover all OQ8 s obligation.</p><p>Ensure funds received from lenders and owners are on timely basis.</p><p>Excess funds deposited in the interest earning account on timely basis (e.g., usage of overnight clearing account)</p><p>Support Manager in finding optimal solutions for applications of available funds.</p><p>coordinate payment and receiving of fund transactions with stakeholders,</p><p>Coordinate with departments to ensure that complete and accurate information is received for the cash flow forecasting reports in order to ensure the availability of funds to cover all obligations with no delay and no shortfall while securing the timely and accurate generation of all the required reports.</p><p>Responsible for Loan Agreements end to end process (fund and finance position in the banks, negotiation of charges for all banking services, Interest Charges &amp; Review the settlement).</p><p><strong>Planning &amp; Forecasting</strong></p><p>Gathers, interprets, and uses complex data to develop financial models that will improve Treasury processes and optimize results.</p><p>Executes financial models for OQ8 projects as part of Capital Planning Five-year forecast during the annual Business Planning Cycle.</p><p>Develops various financial scenarios for all units based on several variables, including business structure, feedstock and product prices, technologies, product premium per segment, CAPEX, and OPEX.</p><p>Interprets these scenarios and their impact on project returns into commercial terms to support optimization of business decisions.</p><p>Analyses and presents key results of financial analyses to OQ8 team and decision-makers in a clear manner.</p><p>Identifies critical elements to maximize project returns and optimize business risks in these transactions.</p><p>Develop, maintain, and report the medium-to-long term 5-year finance strategy for Treasury.</p><p>Develop cash flow forecasts for EPC Contractor, progress payments, loan repayments and other major contractor payment commitments on periodic basis.</p><p>Monitor and report the actual spend against the annual business plan and the forecast highlighting variances.</p><p>Manages and estimate foreign currency bookings (primarily forward and spot deals), financial guarantees, LC opening based on commitments.</p><p>Coordinating Due Diligence of Debt structure &amp; interacting with financial advisor to prepare Funding.</p><p>Coordinating with Snr Financial Analyst to prepare / support OQ8 Financial Model for financing strategies purpose.</p><p>Coordinating to develop Treasury Policy &amp; procedure.</p><p>Highlight medium to long term view of the financial position of the company and work with the Manager of Treasury to present key financial considerations and solution options.</p><p>Structure financing solutions for existing borrowings and new funding needs whilst ensuring structures are following OQ8 Refinery strategy and existing terms and conditions.</p><p><strong>Financial Planning and Reporting</strong></p><p>Leads finance Refinery value project initiatives and cost optimization program.</p><p>Participates in budgeting for departments and projects.</p><p>Supports the team in data collection from major focal points in the businesses.</p><p>Develops Monthly Latest Estimate on Capex Actual expenditure and performs Variance analysis against Annual Approved budget.</p><p>Prepares Capital Planning reports for internal and external stakeholders.</p><p>Prepares Consolidated Financials (Income Statement, Balance Sheet, and Cash Flow Statements) for the five-year planning cycle using the tools and models in hand.</p><p>Reviews and analyzes Financial Statements to ensure accuracy and completeness.</p><p>Reports progress against plan and milestones.</p><p><strong>Insurance</strong></p><p>Obtains contracts, work orders, and certificates of insurance to verify coverage by contractors and insurance carriers.</p><p>Filing and overseeing projects related to retention requirements.</p><p>Filling Data Entry of claims and legal payments in the System.</p><p>Initiate the process settlement payments for claimants payments for the Claims Department</p><p>Enters and sets up new claims/case files with high degree of efficiency.</p><p>Indexes claims/cases using the system &amp; database.</p><p>Send out acknowledgment letters on new claims.</p><p>Investigates contractor claims, researches, and gathers information using work order scheduling history and computer data systems.</p><p>Develop knowledge of relevant claims databases to create and produce reports as requested.</p><p>Effectively coordinates with Claims team in assigned tasks.</p><p>Monitors contractors claim handling through resolution and evaluate and negotiates the settlement</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><p>Bachelor s degree in accounting, finance or relevant field</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>10 years of relevant experience.</p><p>Oil and Gas / Energy industry experience is preferred (including upstream and downstream exposure).</p><p>Working experience in Treasury Operations, including financial planning, Compliance, and Insurance.</p><p>Familiarity with IFRS (international Financial Reporting Standards) supported by ACCA/CIMA qualification or education in progress.</p><p>Knowledge of financial statements and consolidation of financial statements.</p><p>Experience in presenting and preparing proposals to recommend new strategies.</p><p><strong>Soft:</strong></p><p>Strong communication skills (Written and Verbal)</p><p>Time Management and able to handle workload.</p><p>Proactive person</p><p>Ability to meet tight deadlines and able to work under pressure.</p><p>Attention to detail,</p><p><strong>Technical :</strong></p><p>SAP finance module proficiency: Working knowledge of ERP system and advanced MS Office applications skills.</p><p>Reporting treasury operations, insurance and Compliance matters including tracking of discrepancies in statement and reports.</p><p>Demonstrated effective Bank relation skills and bank procedure knowledge.</p>