مراقب وثائق

<p><strong>Job Title: Security Cameras and Networking Systems Technician (Low Voltage)</strong></p><p><strong>Responsibilities:</strong></p><ul><li>Installation, operation, and maintenance of surveillance cameras.</li><li>Installation, extension, and programming of network systems and low-voltage systems.</li><li>Diagnostics of faults and performing necessary maintenance.</li><li>Preparation and installation of network devices and linking them together.</li><li>Reading drawings and executing tasks according to technical specifications.</li><li>Testing systems and ensuring proper operation.</li><li>Preparing maintenance reports and completed works.</li></ul><p><strong>Requirements:</strong></p><ul><li>Appropriate technical qualification.</li><li>Experience in installing and maintaining surveillance cameras and network systems.</li><li>Good knowledge of low-voltage systems.</li><li>Ability to handle networking and surveillance devices.</li><li>Commitment, accuracy, and ability to work in the field.</li></ul>

<p>Manage and control all finance activities of the station that include authorising, (as per</p><p>the manual of authorities), evaluating and implementing corporate finance decisions in</p><p>areas covering Revenue, Receivables, Payables, Cash/Banking, Payroll, General Ledger</p><p>and Taxation.</p><ul><li><p>Plan, organize, direct and control the activities of all sub-ordinates at the station</p></li></ul><p>with the objective of achieving high accounting standards, protecting the</p><p>company’s assets minimizing cost, setting up modern accounting systems and</p><p>establishing a business support function at the outstations.</p><ul><li><p>Manage the implementation of new accounting systems and procedures as</p></li></ul><p>required by head quarters from time to time.</p><ul><li><p>Implement and monitor internal controls in all areas of the station.</p></li><li><p>Responsible for the audit rating of the station as far as it relates to Finance areas.</p></li><li><p>Liaise with all department head at the station/HDQ to provide adequate business</p></li></ul><p>support for their areas.</p><ul><li><p>Exercise supervisory functions and exercise financial authority established by</p></li></ul><p>management for the position.</p><p>The definition of duties or responsibilities mentioned below are only indicative and are not</p><p>exhaustive. The duties and responsibilities are subject to changes depending upon the</p><p>changes in operations at the station, local laws and requirements of the Head Office.</p><p>Accounts and records</p><ol><li><p>Plan, organize, direct and control the activities of all sub-ordinates at the</p></li></ol><p>station with the objectives of achieving high accounting standards, protecting</p><p>the company’s assets, minimizing costs, assist HDQ in implementing modern</p><p>accounting systems and establishing a business support function at the</p><p>station.</p><ol><li><p>Direct the financial accounting function at the stations to ensure that there are</p></li></ol><p>adequate internal controls and compliance with company policies.</p><ol><li><p>Develop the support systems and processes at the station so that the</p></li></ol><p>accounting transactions are correctly allocated and provide the required</p><p>management information on a timely basis.</p><ol><li><p>Ensure proper maintenance of station accounts' records and documents such</p></li></ol><p>as assets records, bank reconciliations, General ledgers, purchase/service</p><p>invoices, internal invoices, prepayment invoices, iexpense reports, remittance</p><p>advises, sales reports, receipts, bank statements, cheque books, payrolls and</p><p>revenue documents. Review the filing systems from time to time to ensure</p><p>easy accessibility at any time to the required information.</p><ol><li><p>Review the existing manuals and procedures and advise simplification and</p></li></ol><p>rationalization.</p><p>Expenditure</p><ol><li><p>Prepare the annual plans and budgets (capital and operating) for the finance</p></li></ol><p>activity at the station. Practicing budgetary control by ensuring that actual</p><p>expenditure is within the limits of budget so that no adverse variances could</p><p>occur.</p><p>Assist and guide in the preparation of the annual budgets of all departments at</p><p>stations. Ensure that they comply with management parameters and that they</p><p>are submitted to HDQ in time.</p><ol><li><p>Control petty cash accounts at town office, Airport office etc.. to ensure sound</p></li></ol><p>processing, according to GF procedure. Ensure that reimbursement claims are</p><p>lodged by staff on timely basis. Conduct surprise check of petty cash to ensure</p><p>that petty cash float is utilised for GF business.</p><ol><li><p>Cause to run and maintain Station Payroll. Ensure that any changes in rate of</p></li></ol><p>pay is supported by authorised documents.</p><ol><li><p>Ensure proper application of company policies in the matter of settlement of</p></li></ol><p>duty travel claims, entertainment claims, medical claims etc., of staff at the</p><p>station.</p><ol><li><p>Maintain schedule of GF contracts with third parties and ensure that concerned</p></li></ol><p>department initiates renewal process in time. Review the contracts to ensure</p><p>that GF interests are well protected</p><ol><li><p>Ensure that payments for the purchases or services received are made to</p></li></ol><p>supplier based on original documents, proper certification of services and</p><p>verification of rates and contract terms and conditions.Monitor and ensure</p><p>proper control over the disbursement bank account to ensure proper utilization</p><p>of funds and maintain optimal balance in this account so that no idle cash</p><p>balances is there, which causes a loss to the company, nor a shortage takes</p><p>place which could harm the company goodwill and causes bank interest</p><p>payable.</p><p>Ensure that bank reconciliation is prepared on timely basis. Any errors and</p><p>omissions in the bank statement to be advised to the bank and rectification</p><p>action followed up.</p><p><strong>Desired Candidate Profile</strong></p><p>EDUCATION & TRAINING</p><ol><li><p>University degree or equivalent. Professional Accounting qualification is an</p></li></ol><p>added advantage (CA/CPA/CMA/CFA)</p><ol><li><p>Possess Good Accounting knowledge</p></li><li><p>Fluency in written and spoken English</p></li><li><p>Ability and experience in writing concise and accurate financial reports and</p></li></ol><p>correspondences.</p><p>C. EXPERIENCE:</p><p>5-7 years experience in similar position. Airline experience in expenditure and</p><p>revenue accounting preferable.</p>

<p>Responsibilities: Lead quality control processes from raw materials to finished products using HPLC, GC, UV, Karl Fischer, spectrophotometry, lab instruments &amp; analytical equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>Professional in operation and calibration of HPLC, UV, FTIR, and all lab instruments. Must have extensive experience in preparing all QA documentation and compliance records.</p>

<p>We are hiring below mention manpower for Oman.</p><p><span >Candidate should have 6 to 8 years of exp in oil &amp; gas,petrochemical &amp; Refinery with NDT Level - 2 &amp; CSWIP certified.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Planners, cost controller, resource controllers Job Content The Manager (Planning) at Projects Site will be reporting to the Project Directors/Project Managers in all responsibilities related to the project planning and control. He will be assisted by the Planning engineers, cost controllers DUTIES &amp; RESPONSIBILITIES Prepare and update Project base line schedule in P-6, and its revision when required with all supporting documents for submission to Client / Consultant. Review the schedule revisions/updates with the consultant/ client for approvals. Preparation of daily/ weekly/ monthly reports for consultant/ client/ Management related to the project stats updates. Prepares the supporting documents (impact schedule or any such document required by contracts) required to submit Time Extension Claim to be submitted to contracts Department. Preparing Master Budgets / Revisions for the project under guidance of Project Manager/Director with assistance from Cost controller. The same to be reviewed by Planning Manager before it is submitted to project manager for review by various heads and to be put upon to Unit Head for his approval and subsequent approval from CEO. Daily and monthly monitoring of the actual cost against the budget and report to project manager with variance analysis and mitigation plan. Prepare, update, Monitor and revise the business plan under guidance of Project Manager and submit to Unit head for review. Prepare maintain and update the data base of the resources with the project. Prepare the Rolling projections for resources manpower and equipment on monthly basis to be submitted through the ERP . Compile the Daily progress report of project and submit it to project manager, Unit head. Prepare, maintain and update the project documents required by MSP for the audit from corporate QHSE and attend the auditor as and when audit is scheduled</p><p><strong>Desired Candidate Profile</strong></p>Competencies/Skills Primavera P6 Communication skills People &amp; Project Management Information Technology skills Proactiveness Decision Making Problem Solving skills Team Management

<p>1. Fleet &amp; Rider Management: Monitor daily rider performance, manage shift rosters, coordinate breaks, and optimize zone allocations. 2. KPI Tracking: Track, document, and report on core logistics metrics like delivery times, order cancellations, and service level agreements (SLAs). 3. Compliance &amp; Quality: Audit rider appearance, professional conduct, and equipment usage via field checks and data analysis. 4. Onboarding &amp; Training: Supervise local rider onboarding schedules and support ongoing operational training.</p>

<p>Responsible for monitoring the quality of incoming and outgoing materials, products, services for the assigned project, as well as the associated construction/production/manufacturing/installation etc process. Also responsible for conducting tests, analyzing measurements, and reporting thereof. Overall, a Quality Control Inspector, is responsible for making sure that the material/product/service meets the expected standards before being sent to the customer so as to arrest/reduce the chances of failure/non conformity.<br></p><ol><li><p>Responsible for all day to day activities and execution of all Quality Control plans for the assigned project in line with organizational and project/location specific QMS/CQP/PQP, international standards (ISO etc), client and statutory requirements</p></li><li><p>Responsible to perform various functional quality assessments & inspections on input samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to assess & inspect output samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to initiate corrective actions on non-conformities and monitor & track them to completion</p></li><li><p>Responsible to define functional inspection and test processes and document inspection outcomes by completing detailed inspection reports and performance records. Responsible to measure, track and monitor improvements to the construction/production/manufacturing/installation etc process to ensure quality control</p></li><li><p>Responsible for all individual and specific departmental productivity targets, financial objectives, KPIs and attainment thereof.<br></p></li></ol><p><strong>Other tasks:</strong></p><ol><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management</p><p><br><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>Responsible for execution of Quality inspections as per SP 1171, Contract quality control plans and inspection test packs. He/she shall report to the relevant area Quality Engineer.<br></p><p><strong>Educational Qualifications</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering<br></p></li></ul><p><strong>Professional Certifications</strong></p><ul><li><p>Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent</p></li><li><p>ASNT Level 2 or equivalent in UT, RT, PT, MT.</p></li><li><p>Certification in Quality Management Systems, Six Sigma, ISO, Total Quality Management or equivalent (preferred)</p></li><li><p>B_Gas Certification.</p></li></ul><p><strong>Skills</strong></p><ul><li><p>A proven work experience as a Welding QCI</p></li><li><p>Familiarity with latest quality-oriented trends in the industry. Knowledge of best practices</p></li><li><p>Strong writing and record keeping abilities. Strong IT skills. Strong communication, planning, organizing and leadership skills.</p></li></ul><p><br></p><p><u>Key details of the position:</u></p><ul><li><p>Site-based job&nbsp;<strong>without family status</strong></p></li><li><p><strong>Food, accommodation and transportation</strong>&nbsp;will be provided by the company</p></li><li><p>Mandatory -&nbsp;<strong><em><u>Oil & Gas Experience & The role requires significant experience in pipelines, Cross Country Pipelines and flowlines and is offered on a long-term basis employment.</u></em></strong></p></li><li><p><strong>Leave cycle:</strong>&nbsp;6 months followed by 14 days of paid leave&nbsp;(Client approved Candidates/position only)</p></li></ul><p><br><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Drawings &amp; Designs is responsible for the development, management, control, and continuous improvement of all engineering drawings, technical documentation, plant design records, and engineering change processes across the mining and processing operations. The role ensures that all engineering drawings, as-built documentation, layouts, schematics, and design data are accurate, current, compliant with applicable engineering standards, and readily available to support safe, reliable, and efficient operation of plant assets. The position provides technical leadership for engineering design activities, drawing management systems, plant modifications, engineering change management (MOC), document control coordination, multidisciplinary design reviews, and digital engineering initiatives. The role supports maintenance, operations, projects, shutdowns, and capital development activities by ensuring engineering documentation integrity and effective design governance throughout the asset lifecycle.</p> <p> </p> <p><b>Detailed Description </b></p> <p>DRAWINGS AND DESIGN MANAGEMENT</p> <p>Develop, review, and manage engineering drawings including mechanical, structural, piping, electrical, instrumentation, civil, architectural, and process drawings.</p> <p>Ensure all engineering drawings are maintained accurately and updated to reflect plant modifications and as-built conditions.</p> <p>Establish and maintain engineering drawing standards, drafting procedures, templates, and design guidelines.</p> <p>Ensure consistency and compliance with applicable international standards, company requirements, and OEM specifications.</p> <p>Coordinate multidisciplinary drawing reviews and approvals prior to implementation of modifications.</p> <p>Maintain master drawing registers and document history records.</p> <p>Ensure obsolete drawings are withdrawn and controlled in accordance with document management procedures.</p> <p>Support digitalization initiatives involving engineering document management and drawing systems.</p> <p>ENGINEERING DESIGN AND MODIFICATIONS</p> <p>Lead and coordinate engineering design activities for plant upgrades, asset improvement initiatives, debottlenecking projects, and operational modifications.</p> <p>Prepare conceptual, basic, and detailed engineering designs.</p> <p>Develop engineering calculations, technical specifications, scopes of work, and equipment layouts.</p> <p>Conduct feasibility studies and technical evaluations for proposed modifications.</p> <p>Ensure designs achieve required safety, operability, maintainability, reliability, and cost objectives.</p> <p>Coordinate engineering deliverables with Operations, Maintenance, Reliability, Projects, and external consultants.</p> <p>Participate in design verification and interdisciplinary design reviews.</p> <p>Ensure engineering designs consider lifecycle cost optimization and long-term asset sustainability.</p> <p>MANAGEMENT OF CHANGE (MOC)</p> <p>Manage engineering aspects of the Management of Change process.</p> <p>Review and evaluate proposed modifications and technical changes.</p> <p>Ensure all design changes are supported by appropriate engineering documentation and risk assessments.</p> <p>Coordinate updating of drawings, technical documents, procedures, and asset records following approved changes.</p> <p>Verify implementation of approved modifications and completion of as-built documentation.</p> <p>Ensure engineering changes comply with statutory, safety, environmental, and operational requirements.</p> <p>ENGINEERING DOCUMENT CONTROL</p> <p>Maintain engineering document control systems and technical databases.</p> <p>Ensure proper filing, numbering, distribution, revision control, and archiving engineering documents.</p> <p>Manage controlled copies of plant drawings and technical records.</p> <p>Coordinate document reviews and approvals with engineering disciplines and stakeholders.</p> <p>Ensure document accessibility for maintenance, operations, projects, and regulatory requirements.</p> <p>Support audits by ensuring engineering records and documentation are accurate and available.</p> <p>PLANT LAYOUTS AND AS-BUILT MANAGEMENT</p> <p>Develop and maintain plant general arrangement drawings, equipment layouts, utility plans, and site infrastructure drawings.</p> <p>Coordinate field verification activities to ensure drawing accuracy.</p> <p>Conduct plant surveys and document existing conditions where required.</p> <p>Ensure timely preparation and updating of as-built drawings following project completion.</p> <p>Establish processes for maintaining plant configuration integrity.</p> <p>Support operational and maintenance teams through provision of accurate plant data and layouts.</p> <p>PROJECTS AND CAPITAL DEVELOPMENT SUPPORT</p> <p>Support capital projects through engineering design development and drawing preparation.</p> <p>Review consultant and contractor engineering deliverables.</p> <p>Participate in project scope development, technical reviews, and constructability assessments.</p> <p>Ensure project designs integrate effectively with existing facilities.</p> <p>Coordinate engineering deliverables during project execution and commissioning activities.</p> <p>Support handover processes and verification of final project documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering/production engineering or CAD/CAM engineering or equivalent</p> <p><b>Experience: </b></p> <p> Bachelor s degree with 15+ years experience in designs and drafting mechanical structures and mechanical equipment in mining, minerals processing, or heavy industrial operations.</p> <p> Experience in CAD/CAM, SolidWorks or equivalent design software</p> <p> Minimum 5 years in a senior engineering, design coordination, or technical authority role.</p> <p>Certifications: Candidate must have followed certification</p> <p> Certified AutoCAD Professional or equivalent CAD Design Certification.</p> <p>Following certifications added advantage</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Certified Maintenance and Reliability Professional (CMRP).</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Autodesk Certified Professional (ACP) or equivalent advanced CAD certification.</p> <p><br></p>

<p> Maintain and optimize DCS, PLC, SCADA, and HMI systems to ensure continuous and reliable plant operation.</p> <p> Monitor system health, alarms, communication status, and controller performance.</p> <p> Perform configuration, programming, and modifications of automation systems in accordance with approved Management of Change (MOC) procedures.</p> <p> Ensure backup and restoration of automation software and configurations.</p> <p> Maintain system documentation and software version control.</p> <p> Manage Operational Technology (OT) infrastructure including industrial servers, workstations, engineering stations, operator consoles, industrial switches, firewalls, and network equipment.</p> <p> Monitor OT network performance and system availability.</p> <p> Ensure redundancy systems remain fully operational.</p> <p> Coordinate system upgrades and hardware replacements.</p> <p> Implement and maintain OT cybersecurity controls in accordance with company policies and international standards.</p> <p> Monitor cybersecurity events and coordinate incident response activities.</p> <p> Support periodic vulnerability assessments and security audits.</p> <p> Diagnose and resolve automation system faults, communication failures, controller issues, and software-related problems.</p> <p> Provide technical support during plant operations and maintenance activities.</p> <p> Support emergency troubleshooting to minimize plant downtime.</p> <p> Investigate recurring automation issues and recommend corrective actions.</p> <p> Support automation and control system projects.</p> <p> Conduct Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning activities, if required.</p> <p> Verify contractor deliverables and documentation.</p>

<h3>Key responsibilities</h3> <p>Duties</p> <ul> <li>Maintain and optimize DCS, PLC, SCADA, and HMI systems to ensure continuous and reliable plant operation.</li> <li>Monitor system health, alarms, communication status, and controller performance.</li> <li>Perform configuration, programming, and modifications of automation systems in accordance with approved Management of Change (MOC) procedures.</li> <li>Ensure backup and restoration of automation software and configurations.</li> <li>Maintain system documentation and software version control.</li> <li>Manage Operational Technology (OT) infrastructure including industrial servers, workstations, engineering stations, operator consoles, industrial switches, firewalls, and network equipment.</li> <li>Monitor OT network performance and system availability.</li> <li>Ensure redundancy systems remain fully operational.</li> <li>Coordinate system upgrades and hardware replacements.</li> <li>Implement and maintain OT cybersecurity controls in accordance with company policies and international standards.</li> <li>Monitor cybersecurity events and coordinate incident response activities.</li> <li>Support periodic vulnerability assessments and security audits.</li> <li>Diagnose and resolve automation system faults, communication failures, controller issues, and software-related problems.</li> <li>Provide technical support during plant operations and maintenance activities.</li> <li>Support emergency troubleshooting to minimize plant downtime.</li> <li>Investigate recurring automation issues and recommend corrective actions.</li> <li>Support automation and control system projects.</li> <li>Conduct Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning activities, if required.</li> <li>Verify contractor deliverables and documentation.</li> </ul> <h3>Coordination, stakeholder &amp; communication management</h3> <ul> <li>Coordinate closely with other departments to ensure the availability, reliability, and security of automation and OT systems.</li> <li>Liaise with O&amp;M team to plan automation maintenance activities, controller changes, software updates, and system testing.</li> <li>Coordinate with O&amp;M team during logic modifications, alarm testing, equipment commissioning, and troubleshooting activities.</li> <li>Work closely with the IT department to ensure proper segregation between IT and OT networks while coordinating cybersecurity controls, system backups, disaster recovery, and network connectivity.</li> <li>Work with E&amp;IC team during instrumentation integration, PLC programming, communication testing, and commissioning activities.</li> <li>Liaise with Supply Chain and Warehouse regarding procurement of automation hardware, software licenses, spare parts, communication equipment, and technical services and other OT system related work.</li> <li>Coordinate with OEMs, system integrators, software vendors, and contractors for technical support, upgrades, warranty services, and specialized maintenance activities.</li> <li>Work closely with EHS team to ensure compliance with Permit-to-Work (PTW), Lockout/Tagout (LOTO), cybersecurity procedures, and operational risk assessments during plant activities.</li> <li>Participate in project meetings, technical reviews, cybersecurity assessments, maintenance planning meetings, shutdown planning, and digital transformation initiatives.</li> <li>Report system performance, cybersecurity risks, automation issues, equipment failures, and improvement recommendations to the Engineering Manager.</li> <li>Report critical automation failures, OT cybersecurity incidents, communication failures, and operational risks to minimize plant downtime and maintain operational continuity.</li> </ul> <h3>Policies, processes &amp; procedures</h3> <ul> <li>Follow all relevant policies, processes, and standard operating procedures so that work is carried out in a controlled and consistent manner. This includes, but is not limited to, maintaining confidentiality and privacy of company data, as well as adhering to cybersecurity, security, and safety standards, following professional ethics and behavioral standards.</li> <li>Ensure compliance with company engineering standards, OT cybersecurity policies, automation procedures, and applicable legal and regulatory requirements.</li> <li>Report significant automation, cybersecurity, operational, or compliance issues to the Engineering Manager.</li> <li>Perform other duties as assigned.</li> </ul><p><strong>Desired Candidate Profile</strong></p><h3>Job qualifications and experience requirements</h3> <ul> <li>Bachelor s Degree in Electrical Engineering, Instrumentation &amp; Control Engineering, Automation Engineering, Electronics Engineering, or equivalent.</li> <li>Minimum 3 to 5 years relevant experience in industrial automation, DCS/ PLC systems, instrumentation, and control engineering.</li> <li>Preferably experience in desalination, water/ wastewater treatment, power generation, oil &amp; gas, or continuous processing industries.</li> <li>SWRO desalination experience is an advantage but not mandatory.</li> <li>work knowledge with DCS/ PLC/ SCADA/ HMI systems,</li> <li>Ability to troubleshoot control system and instrumentation issues.</li> <li>Familiarity with industrial communication networks such as Modbus and Ethernet.</li> <li>Understanding of process control fundamentals and alarm management.</li> <li>Knowledge of system backup and change management procedures.</li> <li>Familiar with control logic and equipment interlocks.</li> <li>Experience in PLC programming and control logic modification.</li> <li>Experience with at least one major automation platform such as Siemens, AB, Schneider, Emerson, Honeywell, Yokogawa, or Xinhua.</li> <li>Familiarity with controller architecture, redundancy concepts, communication drivers, historian integration, firmware/database management, and controlled online change management in live plants.</li> </ul>

<p>Title: Class teacher Department: Academics Reports to: Academic Quality Controller / Director / RAQC Studying &amp; Preparing the curriculum to enable the teacher to prepare the lesson plans for classes &amp; deliver in class according to the set pacing charts. Checking students notebooks &amp; copybooks on regular basis to ensure that they are preparing their homework &amp; writing down the required points. Correcting &amp; grading of written parts of exams. Advice and guidance to students in the class _ the teacher will remind the students on a regular basis that she is available to see them at certain times each week to discuss problems, give advice, etc.( This should happen at least three times a week in the form Classroom at the beginning of the Lunch Recess). Follow up of letters and notices to parents to check that all letters, results, memos or any other form of written communication to parents have, in fact, been delivered. Where appropriate to check that replies have been received. Posting of Results to check that AMS results have been posted and students have had them drawn to their attention. To replace any results that go missing. To check on a daily basis that an up to date seating plan is in place and to replace it immediately if of goes missing. To monitor class prefects to have regular meetings with class prefects and to make sure that they know what are their duties. Decoration and Displays to be responsible for the pin boards and other displays in the classroom. To make sure that there is a lively and attractive display of material that is relevant to the various themes in Social Studies, Class Reader, etc. To monitor general class cleanliness and tidiness. There should be no direct communication between Class teachers and Parents. All communication is channeled through the AQC. Class teachers should report problems immediately to the AQC. A file will be provided for you to note sown issues, if the AQC is not available. All problems must be regarded as confidential. They can be discussed only with the AQC or the Director not with other teachers or supervisors. Exam invigilation duties. Class teachers of Grs 4 and 5 should check diaries on a daily basis.</p><p><strong>Desired Candidate Profile</strong></p><h2>Knowledge, skills and Abilities:</h2><ul><li>Passion for teaching</li><li>Ability to abide by the SABIS(R) System &amp; methodology</li><li>Excellent communication skills</li><li>Ability to get through to students</li><li>Strong teaching skills to include planning, delivery of instruction, classroom management, curriculum implementation and classroom assessment</li><li>Strong organizational skills</li><li>Excellent planning skills</li><li>Punctuality</li><li>Efficiency in delivery</li><li>Conscientiousness with a sense of responsibility</li><li>Maturity</li><li>Ability to spread positive spirit and maintain positive atmosphere</li></ul>

<p><b>Job Description</b></p><p>• Prepare and update Project base line schedule in P-6, and its revision when required with all supporting documents for submission to Client / Consultant.</p><p>• Review the schedule revisions/updates with the consultant/ client for approvals.</p><p>• Preparation of daily/ weekly/ monthly reports for consultant/ client/ Management related to the project stats updates.</p><p>• Prepares the supporting documents (impact schedule or any such document required by contracts) required to submit Time Extension Claim to be submitted to contracts Department.</p><p>• Preparing Master Budgets / Revisions for the project under guidance of Project Manager/Director with assistance from Cost controller. The same to be reviewed by Planning Manager before it is submitted to project manager for review by various heads and to be put upon to Unit Head for his approval and subsequent approval from CEO.</p><p>• Daily and monthly monitoring of the actual cost against the budget and report to project manager with variance analysis and mitigation plan.</p><p>• Prepare, update, Monitor and revise the business plan under guidance of Project Manager and submit to Unit head for review.</p><p>• Prepare maintain and update the data base of the resources with the project. Prepare the Rolling projections for resources manpower and equipment on monthly basis to be submitted through the ERP .</p><p>• Compile the Daily progress report of project and submit it to project manager, Unit head.</p><p>• Prepare, maintain and update the project documents required by MSP for the audit from corporate QHSE and attend the auditor as and when audit is scheduled.</p><p><br></p><p><b>Requirements</b></p><p>B.E (Civil Engineering) with 12- 15 Years relevant experience.th 12- 15 Years relevant experience.</p><p><strong>Desired Candidate Profile</strong></p><p>B.E (Civil Engineering) with 12- 15 Years relevant experience.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.<br>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: No related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Description</b></p><br> <p><b>About Kerry</b></p><br> <p>Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment.</p><br> <p><b>About the role</b></p><br> <p>The Plant Accountant will play a pivotal role in supporting Kerry’s Operations finance function to deliver timely and accurate financial information and analysis to key stakeholders within Sohar Plant.</p><br> <p>Based at the Sohar manufacturing plant in Oman, the Plant Accountant will assume key responsibility for daily Operations finance activity. We are looking for an energetic &amp; career-minded Plant Accountant who will be highly engaged and support the Regional Finance controller.</p><br> <p><b>Location</b> Falaj Al Qabail, Industrial Area, Sohar, Sultanate of Oman</p><br> <p><b>Reporting to </b>Regional Finance controller</p><br> <p><b>Key responsibilities</b></p><br> <ul><li>Provide support and assistance to the Regional Finance controller and Operations team while meeting reporting requirements within deadlines. This includes management reports like Manufacturing Plant commentary on financial performance, monthly financial reporting against budget, targets and prior years consisting of Management Cost Reports, Manufacturing KPI Reporting, month end closing, Inventory Reporting, Labor Cost and Headcount reporting.</li><li>Provide analysis and insights on Inventory and manage write-offs process in line with KCSA.</li><li>Active participation in physical Inventory count at Plant &amp; external warehouses. Support in variance reconciliation by analyzing material movements in SAP and route cause analysis for the variance and work towards fixing the variance in future.</li><li>Fixed Asset tagging upon capitalization and execution of annual fixed asset count and involve in fixed assets disposal.</li><li>Provide periodic report and set up control mechanism for P2P such as open purchase orders review, follow up with team for actions.</li><li>Ensure connectivity and timelines with GBS to ensure Material Ledger is closed in accordance with regional timelines and is accurate and complete.</li><li>Partnering with Supply Chain to review material costs on weekly basis to ensure accurate cost components.</li><li>Product/Process costing – ensuring that yields, labor and direct overhead standards reflect the true cost of manufacture. Working with cross functional teams to resolve any differences.</li><li>Carry out the Financial Accounting responsibilities as outlined in relevant Kerry Group Policies &amp; Procedures and associated procedures and work instructions to provide financial information and advice.</li><li>Effective liaison with operational personnel to ensure compliance with policies to ensure/improve compliance with Kerry Policies.</li><li>Ensure the timely and efficient completion of all routine Operations Finance activities, and compliance to relevant Kerry Group Policies and Procedures and Kerry Sohar Quality Policies and associated procedures and work instructions.</li><li>Ensure financial activities comply with relevant legislative, professional, and ethical requirements.</li><li>Ensure that Accounting Systems and procedures are established and maintained in accordance with Kerry Policies.</li><li>Ad hoc analysis and reporting as required.</li></ul> <p><b>Qualifications and skills</b></p><br> <p><b>Work Experience</b></p><br> <ul><li>Minimum 5-10 years of related and progressive sets of functional experiences in plant.</li></ul> <p><b>Qualifications and skills</b></p><br> <ul><li>Degree in Finance &amp; Accounting, Business or numerical discipline with relevant Accountancy body qualification preferred.</li><li>Knowledge on executing day to day activities in SAP is must.</li><li>Ability to communicate financial information to non-financial managers.</li><li>Knowledge of inventory management and controlling.</li><li>Well-developed collaborative &amp; interpersonal skills to be able to establish trust and credibility.</li><li>Highly computer literate, with strong emphasis on analytical skills. Candidates should be capable of analysing and reporting on large volumes of data in a user-friendly manner.</li><li>Strong IT skills essential. Familiarity with advanced MS Excel &amp; Power point functionality</li><li>Strong team player with a clear focus on stakeholder engagement and solution delivery.</li><li>Strong communicator, comfortable interacting with confidence across a wide range of stakeholders.</li><li>Takes personal accountability and ownership of actions to completion while acting autonomously.</li></ul> <p>Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a “starter kit,” investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name.</p><br><p>For further information, and to apply, please visit our website via the “Apply” button below.</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Kerry </b> </p><br> <p>Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. </p><br> <p><b>About the role </b> </p><br> <p>The Plant Accountant will play a pivotal role in supporting Kerry’s Operations finance function to deliver timely and accurate financial information and analysis to key stakeholders within Sohar Plant. </p><br> <p>Based at the Sohar manufacturing plant in Oman, the Plant Accountant will assume key responsibility for daily Operations finance activity. We are looking for an energetic &amp; career-minded Plant Accountant who will be highly engaged and support the Regional Finance controller. </p><br> <p><b>Location</b> Falaj Al Qabail, Industrial Area, Sohar, Sultanate of Oman </p><br> <p>Reporting to Regional Finance controller </p><br> <p><b>Key responsibilities </b> </p><br> <ul> <li>Provide support and assistance to the Regional Finance controller and Operations team while meeting reporting requirements within deadlines. This includes management reports like Manufacturing Plant commentary on financial performance, monthly financial reporting against budget, targets and prior years consisting of Management Cost Reports, Manufacturing KPI Reporting, month end closing, Inventory Reporting, Labor Cost and Headcount reporting.</li> <li>Provide analysis and insights on Inventory and manage write-offs process in line with KCSA.</li> <li>Active participation in physical Inventory count at Plant &amp; external warehouses. Support in variance reconciliation by analyzing material movements in SAP and route cause analysis for the variance and work towards fixing the variance in future. </li> <li>Fixed Asset tagging upon capitalization and execution of annual fixed asset count and involve in fixed assets disposal. </li> <li>Provide periodic report and set up control mechanism for P2P such as open purchase orders review, follow up with team for actions.</li> <li>Ensure connectivity and timelines with GBS to ensure Material Ledger is closed in accordance with regional timelines and is accurate and complete.</li> <li>Partnering with Supply Chain to review material costs on weekly basis to ensure accurate cost components. </li> <li>Product/Process costing – ensuring that yields, labor and direct overhead standards reflect the true cost of manufacture. Working with cross functional teams to resolve any differences.</li> <li>Carry out the Financial Accounting responsibilities as outlined in relevant Kerry Group Policies &amp; Procedures and associated procedures and work instructions to provide financial information and advice. </li> <li>Effective liaison with operational personnel to ensure compliance with policies to ensure/improve compliance with Kerry Policies.</li> <li>Ensure the timely and efficient completion of all routine Operations Finance activities, and compliance to relevant Kerry Group Policies and Procedures and Kerry Sohar Quality Policies and associated procedures and work instructions.</li> <li>Ensure financial activities comply with relevant legislative, professional, and ethical requirements.</li> <li>Ensure that Accounting Systems and procedures are established and maintained in accordance with Kerry Policies.</li> <li>Ad hoc analysis and reporting as required.</li> </ul> <p><b>Qualifications and skills </b> </p><br> <p><b>Work Experience: </b> </p><br> <ul> <li>Minimum 5-10 years of related and progressive sets of functional experiences in plant.</li> </ul> <p><b>Qualifications and skills </b> </p><br> <ul> <li>Degree in Finance &amp; Accounting, Business or numerical discipline with relevant Accountancy body qualification preferred.</li> <li>Knowledge on executing day to day activities in SAP is must.</li> <li>Ability to communicate financial information to non-financial managers.</li> <li>Knowledge of inventory management and controlling.</li> <li>Well-developed collaborative &amp; interpersonal skills to be able to establish trust and credibility.</li> <li>Highly computer literate, with strong emphasis on analytical skills. Candidates should be capable of analysing and reporting on large volumes of data in a user-friendly manner.</li> <li>Strong IT skills essential. Familiarity with advanced MS Excel &amp; Power point functionality</li> <li>Strong team player with a clear focus on stakeholder engagement and solution delivery.</li> <li>Strong communicator, comfortable interacting with confidence across a wide range of stakeholders.</li> <li>Takes personal accountability and ownership of actions to completion while acting autonomously.</li> </ul> <p>Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a “starter kit,” investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name. </p><br> <p>For further information, and to apply, please visit our website via the “Apply” button below. </p><br><br> </div>

<p><strong>Title:</strong> School Librarian</p><p><strong>Department:</strong> Administration</p><p><strong>Reports to:</strong> Academic Quality Controller / Director</p><p><strong>User Services:</strong> Help students find the information they need. Analyzing students needs to determine what information is appropriate. Showing students how to access information. Help students navigate the Internet. Coordinate programs such as AR. Help teachers develop curricula. Acquire materials for classroom instruction, and some times team teach. Lend and collect books, periodicals, video tapes and other materials. Inspect returned materials for damage, check due dates, and compute fines for overdue material. Help students who have vision problems.</p><p><strong>Technical services:</strong> Acquisitions and cataloguing. Acquire and prepare materials for use. Read book reviews, publishers announcements, and catalogues to keep up with current literature and other available resources. Prepare cards. Update computer records. Maintain the computer system. Develop and index databases and help train users to develop searching skills for the information they need. A ware of how to use Internet resources in order to locate information. Sort returned books, periodicals, and other items and return them to their designated shelves, files or storage areas. Try to repair any material that have been damaged by using tape or paste to repair torn pages or book covers and other specialized to repair more valuable materials.</p><p><strong>Administrative services:</strong> Management and planning of the library. Negotiate contracts for materials and equipment. Supervise students. Prepare direct activities to ensure that everything functions properly. Compile lists of books, periodicals, articles, and audiovisual materials on particular subjects: analyze collections and recommend materials. Prepare reports on area of particular interest. Review records to compile a list of overdue materials and send out notices. Keep the library clean, sorted, calm and reliable. Keep an eye on students not cause any damage to the library assets. Keep records of the students who must study in the library and coordinate with the supervisor for tardiness and absences. Submit a daily report on the library activities. Report to the administration immediately all the matters that can not wait.</p><p><strong>Knowledge, skills and Abilities:</strong> Librarian qualifications Well read &amp; informed about books Excellent communication skills Strong organizational skills Punctuality Efficiency in delivery Conscientiousness with a sense of responsibility Maturity</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Librarian qualifications</li><li>Well read &amp; informed about books</li><li>Excellent communication skills</li><li>Strong organizational skills</li><li>Punctuality</li><li>Efficiency in delivery</li><li>Conscientiousness with a sense of responsibility</li><li>Maturity</li></ul>

<p>JOB PURPOSE To assist the financial controller in administering the day-to-day operational transactions of the company s accounts and various expenses KEY RESPONSIBILITIES Maintenance of accounting records Collection of invoices from vendors, Distribution to various dept. for approval, checking the accuracy and recording it in the system Record project vouchers in the system after checking various currencies Prepare Bank reconciliation Processing checks and bank transfers Assist in preparing annual accounts Coordinate with auditors to ensure compliance Production of financial information as requested by Manager Familiarize with Commercial companies Law and other related laws of Oman Dealing with other departmental heads for costing issues and providing financial information as required Performing any other applicable tasks and duties, within the realm of knowledge, skills and abilities as may be delegated or assigned by the supervisor Perform other related duties or assignments as directed</p><p><strong>Desired Candidate Profile</strong></p><p>SKILLS, QUALIFICATIONS &amp; EXPERIENCE Skills: Microsoft Office (Word, Excel &amp; PowerPoint). Familiarization and understanding of financial terms Good Communication skills Detailed oriented with excellent organizing and planning skills. Good computer skills Consistent in terms of quality and overall attitude Minimum Qualification/Experience: Bachelor s degree in accounting or equivalent 0-2 years in the relevant environment</p>

1. Key Responsibilities <br> Lead site pre-commissioning, commissioning, SAT and start-up of DeltaV BPCS and SIS on new and <br>brownfield (live plant) facilities <br> Execute loop checks, cause &amp; effect / functional testing and third-party serial integration with vendors and <br>client commissioning teams <br> Carry out online changes on running systems backups, partial downloads, hardware additions, controller <br>and firmware upgrades <br> Perform DeltaV system upgrades and migrations, including HCI / virtualization platforms <br> Troubleshoot DCS/SIS, I/O, Foundation Fieldbus / HART, network and redundancy issues at site, and <br>support root-cause analysis of plant trips <br> Prepare and review site documents method statements, risk assessments, SAT procedures and reports, <br>punch lists and as-built updates <br> Coordinate with client operations, commissioning teams, site contractors and vendors, and represent SSP in <br>site meetings <br> Support OT cybersecurity implementation patching, antivirus, backups, user management and system <br>hardening <br>2. Required Skills <br> Strong hands-on Emerson DeltaV DCS/SIS hardware and software configuration, upgrades and <br>maintenance <br> Proven site commissioning and start-up experience on operating oil &amp; gas, chemical plants <br> DeltaV upgrades on HCI / virtualization platforms (VMware, Hyper-V) <br> DCS networking, redundancy, Foundation Fieldbus / HART and Modbus serial integration <br> Good understanding of control philosophies, instrumentation, ESD / F&amp;G and cause &amp; effect <br> OT cybersecurity fundamentals (IEC 62443 awareness) <br> Strong troubleshooting, reporting and communication skills <br> Willingness to work at remote interior sites