Electronics Engineer Jobs in Oman
476 Jobs Found
Save and set alert for similar positionsManage alerts
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Ingénieur-e CEM confirmé-e F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur & Cadre</p><br><br><p>Temps complet</p><br><br><p>La Direction Ingénierie Electronique Mécanique et Optique de Safran Electronics and Defense recherche un-e Ingénieur-e CEM confirmé-e. Intégré-e au sein du Pôle CEM d'Eragny, le ou la candidate aura à terme une position de référent-e et devra :<br>- Assurer la réponse à appel d'offre et le suivi technique des projets dont il-elle aura la responsabilité sur l'ensemble du cycle de développement et/ou de maintien en condition opérationnelle.<br>- Analyser et décliner les spécifications EMI/Foudre du Système dans le but de fournir les contraintes de conception CEM de nos équipements électroniques.<br>- Participer au développement des équipements intégrant de l'électronique afin d'assurer leur conformité aux exigences environnementales CEM de ces équipements.<br>- Spécifier les électroniques de protection et de filtrage.<br>- Suivre/Piloter les essais CEM.<br>- Effectuer les expertises et investigations techniques qui lui seront confiées.<br>- Rédiger les documents de justification dans le cadre des validations, qualifications et certifications.<br>- Développer, capitaliser et diffuser ses compétences techniques au sein de l'équipe.<br>- Piloter les travaux de R&T qui lui seront confiés.<br>- Participer au développement des capacités de modélisation/simulation adaptées aux besoins opérationnels de l'équipe.<br>Le poste requiert une expérience démontrée dans le développement de systèmes électroniques avec des compétences techniques solides en Compatibilité Electromagnétique. Plus particulièrement des connaissances normatives aéronautiques civiles et militaires (DO-160, MIL-STD-461, AECTP,…), des connaissances en terme de techniques d'essais et de mesures ainsi que des connaissances fortes en modélisation/simulation électromagnétique (simulation circuit, lignes de transmission, full-wave).</p><br><br><p>Des déplacements occasionnels au niveau national sont à prévoir et encore plus ponctuellement au niveau international.</p><br><br><p>De formation minimum BAC+5, vous justifierez d'une expérience professionnelle supérieure à 5 ans dans le domaine de la compatibilité électromagnétique et les effets indirects de la foudre. Des compétences en électronique, gestion de projet et en ingénierie des systèmes serait un plus.<br>En terme de savoir-être :<br>- Vous possédez de bonnes compétences en communication.<br>- Vous faites preuve de curiosité, d'autonomie et de dynamisme.<br>- Vous avez de bonnes capacités de travail en équipe.<br>- Vous êtes capable de travailler efficacement et de manière proactive avec d'autres équipes.<br>- Vous savez tenir les jalons dans un contexte multi-projet avec une bonne gestion des priorités.<br>- Vous avez des bonnes compétence en rédaction/revue de documentation technique.</p><br><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Ingénieur-e Intégration Validation Vérification Qualification Calculateur Electronique</p><br><br><p>CDI</p><br><br><p>Ingénieur & Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein de la Direction Technique de Safran Electronics & Defense, le Centre d'Ingénierie Contrôle Moteur et Puissance du site de Valence a pour mission de développer des calculateurs pour l'aéronautique et le spatial. <br>L'ingénieur-e IVVQ est en charge de la préparation et du pilotage de la remontée du cycle en V d'un calculateur aéronautique critique ou spatial. Ainsi, dans un premier temps, il structure et optimise la stratégie d'intégration, de vérification et de qualification des équipements, puis il s'assure du bon déroulé des travaux associés vis-à-vis des plannings et des process Safran Electronics and Defense, en pilotant l'équipe qui réalise les activités ou en réalisant l'activité. <br>Enfin, il est responsable des livrables liés à ses activités.<br>Il a une vision complète de l'équipement et de ses sous-ensembles, et est au cœur du produit : il interagit avec les architectes, les équipes de développement logiciel, électronique, mécanique, FPGA.</p><br><br><p>Des déplacements occasionnels sont à prévoir sur les sites Safran en France. </p><br><br><p>Titulaire d'un diplôme d'ingénieur en électronique ou équivalent, vous disposez d'une expérience professionnelle dans le domaine de l'IVVQ électronique et ou produit (supérieure à 5 ans), avec une expérience en essais de vérification formelle ainsi qu'en essais de qualification type DO160.<br>- Vous connaissez les normes aéronautiques DO178 ou DO254 ou ARP4754, ainsi qu'une norme de qualification type DO160. <br>- Vous êtes rigoureux-se, curieux-se et autonome, vous démontrez de bonnes aptitudes au travail d'équipe et au pilotage technique de petites équipes (1 à 5 personnes).<br>- Vous appréciez et savez communiquer avec des personnes d'autres métiers. <br>- Vous avez une bonne communication et possédez un bon esprit d'analyse et de synthèse.<br>Une bonne expression orale et écrite en français et anglais est indispensable.</p><br><br><br> </div>
<p>Plan, coordinate, and support ELV projects from execution through completion. Coordinate with consultants, contractors, suppliers, and internal teams. Review ELV drawings, specifications, BOQs, and technical documents. Monitor project progress, schedules, materials, and deliverables. Coordinate ELV installation, inspection, testing, commissioning, and handover. Ensure work complies with approved drawings, specifications, quality, and safety requirements. Identify and resolve technical issues, delays, and project-related challenges. Prepare project reports, progress updates, and required documentation. Support RFIs, technical submittals, inspections, and material approvals. Perform other project and engineering duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical, Electronics, or a related Engineering field.</li><li>3 5 years of relevant ELV project engineering experience.</li><li>Good knowledge of ELV systems such as CCTV, Access Control, Structured Cabling, Intercom, PA, SMATV/IPTV, etc.</li><li>Ability to read and interpret technical drawings, schematics, specifications, and BOQs.</li><li>Experience in project coordination, installation, testing, and commissioning.</li><li>Proficient in Microsoft Office; AutoCAD knowledge is an advantage.</li><li>Good English communication skills, both written and verbal.</li><li>Strong organizational, analytical, and problem-solving skills.</li><li>Relevant ELV or project management certifications are an added advantage.</li><li>Quick learner, proactive, and self-motivated.</li><li>Strong ownership and attention to detail.</li><li>Good time management and coordination skills.</li><li>Adaptable to changing project requirements.</li><li>Team player with a positive and collaborative attitude.</li></ul>
<p><br></p><h4>DUTIES & RESPONSIBILITIES:</h4><ul><li>Knowledge of all F-16 systems, pneudraulic, engines, airframe, environmental, fuels, weapons and egress, with emphasis on a background of highly advanced Avionics/Electronics training and experience of how aircraft systems are integrated.</li><li>Highly advanced knowledge and experience with the F-16 MIDAS Technical Order (TO) system. This includes reading schematics, wiring diagrams, fault reporting and isolation.</li><li>Knowledge and application using Avionics and related test equipment, ohm meters, wire integrity testers, memory load verifiers (MLVs), loading of operational flight programs (OFPs), harness repair and removal/installation, matrix and system troubleshooting, alignment, calibration and boresight etc.</li><li>Verifiable formal instructional experience, to include certificates of completion from military courses, Basic Instructor courses (BIC), Maintenance Instructor courses (MIC), or equivalent.</li><li>Experience in the development and creation of maintenance instruction courses including, but not limited to: writing syllabi, course overviews and objectives, student prerequisites, target audiences, number of students per course, course credit and hours, formative and summative assessments and student evaluations.</li><li>Will be responsible for teaching other RAFO instructional courses, as directed, to include F-16 familiarization courses for OJTs, flightline and aircraft safety courses, maintenance officer courses, TO and aircraft forms documentation courses.</li><li>Performs all related instructor duties and liaise with Officer in Charge, Technical Training School (TTS) as directed by RAFO and/or Program Manager.</li><li>Working knowledge of classroom technology, ability to load courses on tablets, electronic whiteboards, building and displaying power point presentations, etc. Ability to create and distribute computer-based (CBTs) or pdf-based testing.</li><li>Ability to train, lead and mentor RAFO technicians and ability to provide understandable, relatable and comprehensive advanced F-16 Electronics training.</li></ul><h4>KNOWLEGE AND SKILLS:</h4><ul><li>AFSC 2A374, 2A3X4 F-16 Block 50 Integrated Avionics, Electrician, Tactical Aircraft Maintenance Tradesman, or equivalent, highly experienced 7 skill level with working knowledge of all F-16 aircraft systems, emphasis on Avionics/Electronics.</li><li>Verified and confirmed instructional training and experience in a classroom and practical environment. Certificates of Training will be required for review prior to acceptance of candidate.</li><li>Self-motivated, highly skilled, highly advanced individual with knowledge of course development, assessment, feedback and formal evaluation of students in their charge.</li></ul><h4>MINIMUM REQUIREMENTS:</h4><ul><li>Minimum 10+ years required F-16 Blk 50 experience, preferably with an Avionics or Electronics related background</li><li>Minimum 5 years required as a former Maintenance Instructor, A&P Instructor or Field Training Detachment (FTD) instructor, or equivalent</li><li>Aviation-related degree from credible university preferred but might be waived in lieu of experience level.</li><li>Airframe & Powerplant (A&P) certification preferred , or equivalent- Not Required. Might be waived, depending, in lieu of experience.</li><li>Minimum required high school diploma, or equivalent</li><li>This will be a highly skilled, self-motivating and challenging position. We are looking for someone with advanced knowledge and experience. Must have integrity, self-discipline and the capability to provide excellent in-depth training for current and future RAFO technicians.</li></ul>Clearance Requirements:<ul><li>Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.</li></ul>Physical Requirements/Working Environment:<ul><li>Frequently lifts parts and equipment up to 25 pounds.</li><li>Occasionally lifts objects up to 50 pounds.</li><li>Most heavy lifting is accomplished through the use of mechanical devices.</li><li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area.</li><li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li><li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li><li>The employee is occasionally required to sit, climb, or balance.</li></ul>#RAFOinstructor #avionicsinstructor #omanf16<p><strong>Desired Candidate Profile</strong></p><h4>KNOWLEGE AND SKILLS:</h4><ul><li>AFSC 2A374, 2A3X4 F-16 Block 50 Integrated Avionics, Electrician, Tactical Aircraft Maintenance Tradesman, or equivalent, highly experienced 7 skill level with working knowledge of all F-16 aircraft systems, emphasis on Avionics/Electronics.</li><li>Verified and confirmed instructional training and experience in a classroom and practical environment. Certificates of Training will be required for review prior to acceptance of candidate.</li><li>Self-motivated, highly skilled, highly advanced individual with knowledge of course development, assessment, feedback and formal evaluation of students in their charge.</li></ul><h4>MINIMUM REQUIREMENTS:</h4><ul><li>Minimum 10+ years required F-16 Blk 50 experience, preferably with an Avionics or Electronics related background</li><li>Minimum 5 years required as a former Maintenance Instructor, A&P Instructor or Field Training Detachment (FTD) instructor, or equivalent</li><li>Aviation-related degree from credible university preferred but might be waived in lieu of experience level.</li><li>Airframe & Powerplant (A&P) certification preferred , or equivalent- Not Required. Might be waived, depending, in lieu of experience.</li><li>Minimum required high school diploma, or equivalent</li><li>This will be a highly skilled, self-motivating and challenging position. We are looking for someone with advanced knowledge and experience. Must have integrity, self-discipline and the capability to provide excellent in-depth training for current and future RAFO technicians.</li></ul>Clearance Requirements:<ul><li>Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.</li></ul>Physical Requirements/Working Environment:<ul><li>Frequently lifts parts and equipment up to 25 pounds.</li><li>Occasionally lifts objects up to 50 pounds.</li><li>Most heavy lifting is accomplished through the use of mechanical devices.</li><li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area.</li><li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li><li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li><li>The employee is occasionally required to sit, climb, or balance.</li></ul>
<p><b>Brief Posting Description </b></p>
<p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p>
<p>Detailed Description </p>
<p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p>
<p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p>
<p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p>
<p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p>
<p>Monitor equipment condition and recommend corrective and preventive actions.</p>
<p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p>
<p>Support long-term asset lifecycle management and replacement planning.</p>
<p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p>
<p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p>
<p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p>
<p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p>
<p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p>
<p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p>
<p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p>
<p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p>
<p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p>
<p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p>
<p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p>
<p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p>
<p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p>
<p>INSTRUMENT RELIABILITY & PERFORMANCE</p>
<p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p>
<p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p>
<p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p>
<p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p>
<p>Identify recurring equipment issues and implement sustainable corrective actions.</p>
<p>Develop reliability-centered maintenance strategies.</p>
<p>Monitor instrument performance against established reliability and availability KPIs.</p>
<p>Support predictive and condition monitoring programs for critical instrumentation assets.</p>
<p>PROCESS INSTRUMENTATION & ANALYZER SYSTEMS</p>
<p>Ensure safe and reliable operation of process instrumentation systems.</p>
<p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p>
<p>Maintain online analyzers, sampling systems, and associated instrumentation.</p>
<p>Monitor instrument accuracy and implement corrective actions where necessary.</p>
<p>Ensure compliance with calibration standards and measurement integrity requirements.</p>
<p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p>
<p><br></p>
<p> </p>
<p><b>Job Requirements </b></p>
<p>Education: </p>
<p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical & Instrumentation Engineering is mandatory.</p>
<p><b>Experience</b>: </p>
<p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p>
<p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p>
<p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p>
<p><br></p>
<p>Urgent Requirement for Oman Estimation Engineer ,Highway Highway Design Engineer, Candidates Must have relevant experience in road constructions, structural,Gulf Experience is Must.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates Must have relevant experience in road constructions, structural,Gulf Experience is Must.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p> WE’RE HIRING – BIOMEDICAL ENGINEER! </p><p><br></p><p> Are you a Biomedical Engineer with strong hands-on experience?</p><p> Laser experience? That’s a BIG PLUS!</p><p><br></p><p>We’re looking for a skilled and experienced professional to join our team URGENTLY.</p><p><br></p><p>✨ Position: Biomedical Engineer</p><p> Key Requirement: Experience with Medical Lasers & Equipment</p><p> Salary: OMR 300–450 (depending on experience)</p><p>⚡ Joining: Immediate</p><p><br></p><p>If you’re technically strong, hands-on, and ready for your next opportunity — we want to hear from you!</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Experience with Medical Lasers & Equipment</p></div>
<p>We are looking for a motivated and enthusiastic Electrical Engineer (Renewable Energy) to join our team.</p><p><strong>Desired Candidate Profile</strong></p><p>The ideal candidate should have:<br>1- A strong interest in sustainable energy technologies, particularly Solar PV, Wind Energy, and other renewable energy systems.<br>2-The ability to multitask and handle both site and office work.<br>3- Excellent technical report writing and communication skills.</p>
<p>Role: Mechanical Engineer</p>
<p>Industry Type: Engineering & Construction</p>
<p>Department: Construction & Site Engineering</p>
<p>Employment Type: Full Time, Permanent</p>
<p>Role Category: Construction Engineering</p><p><strong>Desired Candidate Profile</strong></p><p>UG: B.Tech/B.E. in Any Specialization</p>
<p><b>❖ PIPELINE ENGINEER</b></p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Degree/Diploma in Mechanical Engineering. Experience: Minimum 7 years relevant Oil & Gas</p><p>construction experience, including 5 years in the Middle East, in a supervisory position.</p><p>Technical Skills: Strong knowledge of pipeline welding, lowering, HSS coating, STOPAQ application and box-up activities.</p><p>Test Packs & Documentation: Prepare test packs, review as-built drawings, and ensure completed works comply with Company standards before handover.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>
<p>HYDROTEST ENGINEER</p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Diploma or Bachelor's Degree in Engineering, preferably Mechanical Engineering.</p><p>Experience: Minimum 7 years relevant experience in onshore Oil & Gas construction, including 5 years in Middle East Oil & Gas in a supervisory role.</p><p>Hydrotesting Experience: Strong experience in pipeline and piping hydrotesting, including cleaning, gauging and pressure testing activities.</p><p>Technical Skills: Sound knowledge of hydrotest</p><p>procedures, specifications, standards, documentation and site execution.</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>
<p>MEP ENGINEER Qualification -BE Electrical Experience - T otal 10 years with minimum 5 year GCC experience as an MEP Engineer GCC driving license -Preferred Leave & Other entitlements -As per Omani Labour Law Age - Below 45 years Salary & Benefits -Salary will be discussed and finalized based on Qualification, experience, skills and Interview assessment by client. In addition of salary company will provide free accommodation , Transportation, Medical GENERAL INFORMATION REQUIRED Please send all documents in following sequence of attachment. Kindly accord priority. Document Required to be sent with CV:- Updated CV Academic Certificate of Graduation and above Achievements/Awards during career growth/Licence (if any)/Permit copy/Any other approvals copy as required for job. Experience certificates Passport copy clear (Please attach your Passport last Visa cancelled page if you were present earlier with any employer of current hiring country) Recent Photograph Mobile number Your current Location If already in Gulf, how soon you can join Current Salary & Salary Expectation In case you need any clarification pls send message on WhatsApp PHONE_NUMBER .</p><p><strong>Desired Candidate Profile</strong></p><p>BE Electrical</p>
<p>Total 10 years with minimum 5 year GCC experience as an MEP Engineer</p>
<p>GCC driving license -Preferred</p>
<p>Age - Below 45 years</p>
<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties & Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation & Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls & CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>
<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>
<p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) & Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout & schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs & GU.</p><p><br></p><p>b</p><ul><li>Provide leadership for procurement activities required to support project delivery, including the execution of purchase orders and sourcing of materials through approved company systems.</li><li>Oversee the complete supply chain lifecycle for each purchase order, ensuring compliance with contract requirements, company procedures, and applicable work practices.</li><li>Lead, guide, and develop sourcing and logistics personnel by establishing effective control mechanisms, strengthening process discipline, and improving operational efficiency.</li><li>Develop and implement supply chain strategies that support continuous improvement across contracting, sourcing, logistics, expediting, inventory, and preservation activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) & Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout & schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs & GU.</p>
<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Civil Engineer – Civil & Structural Works (Solar PV Infrastructure)</b> in <b>Oman</b>. Our client is seeking skilled, motivated professionals with strong civil construction expertise and relevant exposure to solar PV or industrial projects. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Execute civil and structural works associated with solar PV infrastructure projects.<br></li><li>Supervise construction of foundations and concrete works in accordance with approved drawings and project specifications.<br></li><li>Coordinate structural steel and aluminum erection activities at project sites.<br></li><li>Perform and verify setting-out and surveying activities for foundations and structural installations.<br></li><li>Monitor site construction activities to ensure compliance with drawings, specifications, quality requirements, and project schedules.<br></li><li>Coordinate with site teams, subcontractors, surveyors, and engineering personnel to resolve construction-related technical issues.<br></li><li>Inspect completed civil and structural works and identify corrective actions where required.<br></li><li>Maintain site records and support progress monitoring for civil and structural activities.<br></li></ul>Required Skills<br><ol><li><b>Civil Construction:</b> Strong practical knowledge of civil construction methods and site execution.<br></li><li><b>Solar PV Infrastructure:</b> Experience handling civil works associated with solar PV or similar industrial projects.<br></li><li><b>Concrete & Foundation Works:</b> Ability to execute and monitor concrete foundations and associated civil works.<br></li><li><b>Structural Steel/Aluminum:</b> Knowledge of steel and aluminum structures and structural erection activities.<br></li><li><b>Setting-Out & Surveying:</b> Hands-on understanding of site setting-out, levels, alignment, and surveying requirements.<br></li></ol>Preferred Skills<br><ul><li>GCC construction project experience.<br></li><li>Experience coordinating multidisciplinary site activities.<br></li><li>Familiarity with large-scale solar PV or industrial infrastructure construction environments.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>5–8 years of civil construction experience</b>, including a minimum of <b>2–3 years in solar PV or industrial projects</b>. Relevant experience should include foundations, structural steel erection, setting-out, and surveying. <b>GCC experience is preferred.</b><br></p><br>Education<br><b>Minimum:</b> B.Sc. in Civil Engineering<br><br> <b>Preferred:</b><br><br> <b>Additional:</b><br><br><br>Contact No-9786888866<br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer – Solar PV / Electrical Power</b> in <b>Oman</b>. Our client, New Alfa International, is seeking skilled and motivated electrical engineering professionals with strong experience in solar PV, electrical construction, EPC projects, and testing & commissioning. Candidates with relevant GCC project exposure are preferred. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Execute electrical construction activities for utility-scale and large rooftop solar PV projects.<br></li><li>Supervise installation and integration of LV and MV electrical networks in accordance with approved drawings and project specifications.<br></li><li>Review Single Line Diagrams (SLDs), electrical layouts, cable schedules, and related technical documentation.<br></li><li>Coordinate installation, testing, and commissioning of solar inverters and associated electrical equipment.<br></li><li>Conduct electrical inspections, functional testing, troubleshooting, and pre-commissioning checks.<br></li><li>Ensure site electrical works comply with project specifications, quality requirements, and applicable safety standards.<br></li><li>Coordinate with civil, mechanical, commissioning, and project teams to achieve construction milestones.<br></li><li>Prepare technical reports, testing records, punch lists, and commissioning documentation.<br></li></ul>Required Skills<br><ul><li><b>Solar PV Engineering:</b> Strong practical knowledge of utility-scale or large rooftop solar PV electrical systems.<br></li><li><b>LV/MV Networks:</b> Experience with installation, testing, and commissioning of low- and medium-voltage electrical systems.<br></li><li><b>Inverters:</b> Hands-on understanding of solar inverter installation, configuration, testing, and troubleshooting.<br></li><li><b>SLD Review:</b> Ability to interpret and review Single Line Diagrams and related electrical engineering drawings.<br></li><li><b>Testing & Commissioning:</b> Practical experience carrying out electrical testing, pre-commissioning, and commissioning activities.<br></li></ul>Preferred Skills<br><ul><li>GCC project experience.<br></li><li>Experience working in EPC construction environments.<br></li><li>Exposure to utility-scale solar power plants.<br></li></ul>Work Experience Requirements<br><p>Candidates must have <b>5–8 years of experience in electrical construction</b>, including a <b>minimum of 3 years in solar PV projects</b> involving utility-scale installations or large rooftop systems. Experience should include LV/MV networks, inverters, SLD review, testing, and commissioning. GCC experience is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.Sc. in Electrical Engineering<br></li><li><b>Preferred:</b> Not specified<br></li><li><b>Additional Certifications:</b> Not specified<br></li></ul>Contact No-9786888866<br><br><br> </div>
<p>Brief Posting Description </p>
<p>The Senior Engineer Reliability & Performance is responsible for developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p>
<p>The position provides technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p>
<p>Detailed Description </p>
<p>RELIABILITY ENGINEERING & STRATEGY MANAGEMENT</p>
<p>Develop and continuously improve site reliability engineering programs and methodologies.</p>
<p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p>
<p>Lead asset reliability improvement initiatives to improve equipment availability and operational performance.</p>
<p>Develop reliability standards, procedures, and best practices.</p>
<p>Facilitate reliability reviews and equipment performance assessments.</p>
<p>Support long-term asset management and lifecycle planning activities.</p>
<p>Ensure reliability objectives align with business and operational requirements.</p>
<p>ASSET PERFORMANCE MANAGEMENT</p>
<p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p>
<p>Develop asset performance indicators and equipment health indices.</p>
<p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p>
<p>Conduct performance benchmarking and improvement studies.</p>
<p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p>
<p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p>
<p>Establish performance improvement roadmaps for critical assets.</p>
<p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p>
<p>Lead Reliability-Centered Maintenance studies for critical assets.</p>
<p>Review and optimize maintenance strategies based on equipment criticality and risk.</p>
<p>Develop maintenance task plans and reliability improvement recommendations.</p>
<p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p>
<p>Ensure maintenance strategies support reliability and business objectives.</p>
<p>Participate in maintenance program reviews and audits.</p>
<p>FAILURE ANALYSIS & DEFECT ELIMINATION</p>
<p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p>
<p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p>
<p>Analyze recurring failures and reliability issues.</p>
<p>Identify bad actors and develop corrective action plans.</p>
<p>Monitor implementation and effectiveness of reliability improvement actions.</p>
<p>Promote defect elimination methodologies throughout maintenance and operations teams.</p>
<p>Capture lessons learned and implement sustainable solutions.</p>
<p>ASSET CRITICALITY & RISK MANAGEMENT</p>
<p>Lead asset criticality assessments across all plant and infrastructure assets.</p>
<p>Develop and maintain asset criticality rankings and risk profiles.</p>
<p>Support risk-based maintenance and reliability decision-making processes.</p>
<p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p>
<p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p>
<p>Support business continuity and risk mitigation initiatives.</p>
<p>MAINTENANCE OPTIMIZATION</p>
<p>Analyze maintenance effectiveness and identify improvement opportunities.</p>
<p>Optimize preventive maintenance frequencies and task content.</p>
<p>Support development of predictive and condition-based maintenance programs.</p>
<p>Evaluate work management performance and maintenance execution effectiveness.</p>
<p>Improve maintenance productivity through data analytics and best practice implementation.</p>
<p>Support spare parts optimization and critical equipment strategies.</p>
<p> </p>
<p><b>Job Requirements </b></p>
<p><b>Education: </b></p>
<p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p>
<p>Experience: </p>
<p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil & gas, petrochemical, power generation, or heavy industrial operations.</p>
<p> Minimum 5 years in senior reliability, asset management, maintenance excellence, or performance improvement role.</p>
<p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p>
<p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p>
<p> Certified Maintenance & Reliability Professional (CMRP).</p>
<p> Certified Reliability Engineer (CRE).</p>
<p> Asset Reliability Practitioner (ARP-E, ARP-L, or ARP-A).</p>
<p> Certified Asset Management Assessor (CAMA).</p>
<p> IAM Certificate or Diploma in Asset Management.</p>
<p> Reliability Centered Maintenance (RCM) Practitioner Certification</p>
<p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p>
<p> ISO 55001 Asset Management Lead Implementer or Lead Auditor.</p>
<p> Lean Six Sigma Green Belt or Black Belt.</p>
<p> Project Management Professional (PMP).</p>
<p> SAP PM Certification.</p>
<p> Power BI Data Analytics Certification.</p>
<p><br></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Job Summary</strong></p><br>
<p>The Senior Structural Engineer is responsible for leading the structural design and delivery of building projects from concept through construction. The role involves managing structural engineering activities, coordinating with multidisciplinary teams, ensuring compliance with local and international design standards, and delivering high-quality engineering solutions that meet client expectations, project requirements, and business objectives.</p><br>
<p><strong><span>Key</span> <span>Responsibilities</span></strong></p><br>
<ul>
<li><span>Lead</span> <span>structural</span> <span>design</span> <span>for</span> <span>residential,</span> <span>commercial,</span> <span>hospitality,</span> <span>healthcare,</span> <span>education,</span> <span>and</span> <span>mixed-use</span> <span>developments.</span></li>
<li><span>Prepare</span> <span>and</span> <span>review</span> <span>structural</span> <span>calculations,</span> <span>reports,</span> <span>specifications,</span> <span>and</span> <span>drawings.</span></li>
<li><span>Ensure</span> <span>compliance</span> <span>with</span> <span>relevant</span> <span>codes,</span> <span>standards,</span> <span>and</span> <span>local</span> <span>authority</span> <span>requirements.</span></li>
<li><span>Coordinate</span> <span>with</span> <span>architectural,</span> <span>MEP,</span> <span>geotechnical,</span> <span>and</span> <span>multidisciplinary</span> <span>teams.</span></li>
<li><span>Support</span> <span>project</span> <span>delivery,</span> <span>resource</span> <span>planning,</span> <span>and</span> <span>technical</span> <span>problem-solving.</span></li>
<li><span>Provide</span> <span>technical</span> <span>guidance</span> <span>and</span> <span>mentoring</span> <span>to</span> <span>junior</span> <span>engineers.</span></li>
<li><span>Liaise</span> <span>with</span> <span>clients,</span> <span>contractors,</span> <span>and</span> <span>stakeholders</span> <span>throughout</span> <span>project</span> <span>phases.</span></li>
<li><span>Support</span> <span>construction</span> <span>activities</span> <span>through</span> <span>design</span> <span>reviews</span> <span>and</span> <span>site-related</span> <span>technical</span> <span>assistance.</span></li>
</ul>
<p><strong>Qualifications & Experience</strong></p><br>
<ul>
<li>Bachelor’s Degree in Civil/Structural Engineering (Master’s preferred).</li>
<li>12 to 15 years of Experience</li>
<li>Design background and aware for design of RC buildings, Foundations design, PT design, and Steel design</li>
<li>Design consultancy background</li>
<li>Oman Municipality approval</li>
<li>Professional accreditation (CEng, MIStructE, PE, MICE, or equivalent) preferred.</li>
<li>Omani nationality will be more preferred</li>
</ul> <br>
<br>
<br> </div>
Receive email alerts for Electronics Engineer Jobs in Oman jobs
You can cancel your email alert at anytime