Mechatronics Engineers Jobs in Oman
6 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Job Description Position: Electrical Engineer Location: Oman, Sohar The Scope of Work: Maintenance, upkeep, and fault handling of all electrical equipment throughout the factory premises. Major Responsibilities: 1. Be responsible for technical management of electrical systems, transformer,distribution cabinets, motors, inverters, PLC and sensors. 2.Analyze, troubleshoot and repair electrical faults, deal with tripping, communication failure and component damage 3.Compile electrical check list, maintenance plan and SOP; update electrical drawings and wiring diagrams 4.Provide electrical technical support for operation & shift staff, conduct technical training 5.Implement electrical safety management: earthing, insulation test, LOTO lockout tagout, high voltage operation safety control Minor Responsibilities: 1.Review electrical modification & new project schemes; perform on site installation, commissioning and power on test 2.Record equipment abnormalities & accidents, write failure reports and formulate corrective & preventive actions 3.Evaluate and apply for electrical spare parts; count component consumption and control spare part cost Performance Standards: Safety management: Neither I nor my subordinates experience any safety incidents or work-related accidents during the month, and the number of instances of red-ink incidents does not exceed 1time. Quality of supply: Ensure stable supply quality and prevent supply interruptions caused by human errors or inadequate management. Ensure that the workgroup performs maintenance and upkeep according to the equipment maintenance plan, implements maintenance tasks, and reduces the frequency of equipment failures.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: 1. College degree or above, major in Electrical Automation, Mechatronics, Electrical Engineering and related fields. 2. Familiar with high/low-voltage electrical circuit, distribution cabinet wiring, motor control, sensors and electric-pneumatic control principle. 3.Able to read electrical schematics and wiring drawings, independently complete inspection, maintenance and technical improvement 4. Familiar with factory electrical safety standards, master LOTO, insulation test and grounding inspection. 5. Strong fault analysis and problem-solving ability, able to handle electrical abnormalities efficiently 6. Hold valid High Voltage/Low-Voltage/ Electrician Certificate is a plus.</p>
<p><b>Brief Posting Description </b></p>
<p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p>
<p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking & Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p>
<p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p>
<p><b>Detailed Description </b></p>
<p>AUTOMATION & CONTROL SYSTEM MANAGEMENT</p>
<p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p>
<p>Ensure automation systems support safe, reliable, and efficient plant operation.</p>
<p>Assist in implementing maintenance strategies to improve system reliability and availability.</p>
<p>Monitor automation system performance and recommend corrective actions.</p>
<p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p>
<p>Support asset lifecycle management and replacement planning activities.</p>
<p>Provide technical support for automation maintenance planning, scheduling, and execution.</p>
<p>Support commissioning, startup, and operational readiness activities.</p>
<p>DCS, PLC & SCADA SYSTEMS</p>
<p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p>
<p>Assist with automation system configuration, maintenance, and performance optimization.</p>
<p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p>
<p>Support backup, restore, and disaster recovery activities.</p>
<p>Assist with software version control and change management processes.</p>
<p>Support testing and verification of DCS, PLC, and SCADA modifications.</p>
<p>Maintain automation documentation, logic diagrams, and system records.</p>
<p>MOC & CHANGE GOVERNANCE</p>
<p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p>
<p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p>
<p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p>
<p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p>
<p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p>
<p>Ensure technical documentation remains updated following approved modifications.</p>
<p>Participate in post-change reviews and verification activities.</p>
<p>PROCESS CONTROL & OPTIMIZATION</p>
<p>Support process control and automation improvement initiatives.</p>
<p>Analyze process performance and identify opportunities for control-loop optimization.</p>
<p>Assist with control-loop tuning and performance monitoring.</p>
<p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p>
<p>Support implementation of advanced process control technologies and digital solutions.</p>
<p>Work closely with Operations and Metallurgical teams to optimize plant performance</p>
<p>IT/OT CYBERSECURITY INTERFACE</p>
<p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p>
<p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p>
<p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p>
<p>Support cybersecurity-related upgrades and remediation activities.</p>
<p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p>
<p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p>
<p><br></p>
<p> </p>
<p><b>Job Requirements </b></p>
<p>Education: </p>
<p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical & Automation Engineering, Mechatronics Engineering, Instrumentation & Control Engineering, or related discipline is mandatory.</p>
<p><b>Experience</b>: </p>
<p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p>
<p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p>
<p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy </p>
<p><b>Brief Posting Description </b></p>
<p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p>
<p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking & Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p>
<p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p>
<p>Detailed Description </p>
<p>AUTOMATION & CONTROL SYSTEM MANAGEMENT</p>
<p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p>
<p>Ensure automation systems support safe, reliable, and efficient plant operation.</p>
<p>Develop and implement maintenance strategies to maximize system reliability and availability.</p>
<p>Monitor automation system performance and recommend corrective and preventive actions.</p>
<p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p>
<p>Support long-term asset lifecycle management and replacement planning.</p>
<p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p>
<p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p>
<p>DCS, PLC & SCADA SYSTEMS</p>
<p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p>
<p>Manage automation system architecture, configuration, and performance optimization.</p>
<p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p>
<p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p>
<p>Manage automation software version control and change management processes.</p>
<p>Review and approve DCS, PLC, and SCADA modifications.</p>
<p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p>
<p>MOC & CHANGE GOVERNANCE</p>
<p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p>
<p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p>
<p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p>
<p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p>
<p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p>
<p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p>
<p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p>
<p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p>
<p>PROCESS CONTROL & OPTIMIZATION</p>
<p>Support operational performance through advanced process control and automation improvements.</p>
<p>Analyze process performance and identify opportunities for control optimization.</p>
<p>Support tuning of control loops and optimization of process control strategies.</p>
<p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p>
<p>Support implementation of advanced process control technologies and digital solutions.</p>
<p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p>
<p><br></p>
<p> </p>
<p><b>Job Requirements </b></p>
<p><b>Education: </b></p>
<p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical & Automation Engineering, Mechatronics Engineering, Instrumentation & Control Engineering, or related discipline is mandatory.</p>
<p>Experience:</p>
<p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p>
<p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p>
<p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p>
<p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p>
<p> ISA Certified Automation Professional (CAP)</p>
<p> Certified Maintenance & Reliability Professional (CMRP)</p>
<p> ISA Certified Control Systems Technician (CCST)</p>
<p> Six Sigma (BB)</p>
<p><br></p>
<p><b>Brief Posting Description </b></p>
<p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p>
<p>Detailed Description </p>
<p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p>
<p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p>
<p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p>
<p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p>
<p>Monitor equipment condition and recommend corrective and preventive actions.</p>
<p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p>
<p>Support long-term asset lifecycle management and replacement planning.</p>
<p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p>
<p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p>
<p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p>
<p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p>
<p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p>
<p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p>
<p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p>
<p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p>
<p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p>
<p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p>
<p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p>
<p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p>
<p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p>
<p>INSTRUMENT RELIABILITY & PERFORMANCE</p>
<p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p>
<p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p>
<p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p>
<p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p>
<p>Identify recurring equipment issues and implement sustainable corrective actions.</p>
<p>Develop reliability-centered maintenance strategies.</p>
<p>Monitor instrument performance against established reliability and availability KPIs.</p>
<p>Support predictive and condition monitoring programs for critical instrumentation assets.</p>
<p>PROCESS INSTRUMENTATION & ANALYZER SYSTEMS</p>
<p>Ensure safe and reliable operation of process instrumentation systems.</p>
<p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p>
<p>Maintain online analyzers, sampling systems, and associated instrumentation.</p>
<p>Monitor instrument accuracy and implement corrective actions where necessary.</p>
<p>Ensure compliance with calibration standards and measurement integrity requirements.</p>
<p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p>
<p><br></p>
<p> </p>
<p><b>Job Requirements </b></p>
<p>Education: </p>
<p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical & Instrumentation Engineering is mandatory.</p>
<p><b>Experience</b>: </p>
<p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p>
<p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p>
<p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p>
<p><br></p>
<p> <strong>IT/IoT Integration Technician</strong> </p> <p>AR Technology is seeking a practical and motivated diploma graduate to support the installation, commissioning, and maintenance of connected devices, sensors, instruments, gateways, and field communications. The position is designed for an early-career technician who can develop into a dependable member of the company's IoT delivery team through supervised field work.</p> <p> <strong>Role Purpose</strong> </p> <p>The technician will work under technical supervision to convert approved designs and deployment plans into safe, well-documented field installations. The role connects physical assets to the wider IoT solution by ensuring that devices are installed correctly, communications are tested, data is received, and field issues are recorded and resolved.</p> <p> <strong>Key Responsibilities</strong> </p> <p> Assist with site surveys by recording installation locations, signal and connectivity conditions, available power, cable routes, mounting requirements and site constraints.</p> <p> Install, label and connect approved sensors, instruments, gateways, antennas, routers, enclosures, power supplies and associated low-voltage cabling under supervision.</p> <p> Configure device and gateway parameters using approved procedures, including identifiers, network settings, reporting intervals and communication profiles.</p> <p> Support commissioning and troubleshooting by checking power, wiring, sensor readings, connectivity, gateway communication, device logs and end-to-end data arrival.</p> <p> Assist with interfaces such as digital input and output, pulse, serial communications and industrial protocols when required by the project design.</p> <p> Support factory, site and user acceptance activities by completing checklists, recording results and reporting non-conformities accurately.</p> <p> Maintain installation records, photographs, device serial numbers, asset labels, configuration details, test results and material usage.</p> <p> Carry out scheduled inspections, preventive maintenance, battery replacement, cleaning, reconfiguration and approved component replacement.</p> <p> Follow company and client safety, security, environmental and permit-to-work requirements; communicate professionally and escalate risks or faults beyond the assigned authority.</p> <p> Participate actively in technical training and apply new knowledge across IoT and other approved connectivity technologies as the company expands its solutions.</p> <p> <strong>Preferred Knowledge and Added Advantages</strong> </p> <p>The following are not mandatory. Candidates who demonstrate one or more of these capabilities will have an added advantage and may be prioritized during shortlisting:</p> <p> Exposure to IoT or wireless technologies such as LoRa, NB-IoT, LTE, Wi-Fi, Bluetooth Low Energy or Zigbee.</p> <p> Awareness of RS-485, Modbus, M-Bus, pulse outputs, digital inputs and outputs, 4-20 mA or 0-10 V instrumentation signals.</p> <p> Basic experience configuring routers, access points, gateways, SIM cards, APN settings or VPN connections.</p> <p> Basic Linux command-line, MQTT, Node-RED, JSON, API testing or simple Python scripting knowledge.</p> <p> Practical exposure to industrial instruments, smart meters, environmental sensors, automation panels, remote telemetry equipment or IP-rated field enclosures.</p> <p> Experience with cable glands, grounding, surge protection, antennas, solar DC power, batteries or UPS systems.</p> <p> Internship or project experience in utilities, oil and gas, industrial automation, telecommunications, smart buildings or field maintenance.</p> <p> Relevant entry-level certification or training, such as networking, electronics, instrumentation, HSE, first aid or an IoT vendor course.</p> <p> A valid Omani driving licence will be strongly preferred because the position includes field travel.</p> <p><br></p> <p> </p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Minimum Mandatory Requirements</strong> </p> <p> Omani national who meets the applicable Ministry of Labour on-the-job training and wage-support eligibility requirements.</p> <p> Diploma in electronics, telecommunications, instrumentation, mechatronics, electrical engineering, computer engineering, networking, information technology or a closely related technical discipline.</p> <p> Basic academic, laboratory, internship or project experience with sensors, circuits, instrumentation, communications or networks, including safe use of basic test instruments under supervision.</p> <p> Basic understanding of IP addressing, Ethernet, Wi-Fi and how field devices communicate through gateways or routers.</p> <p> Ability to follow datasheets, wiring diagrams, installation manuals, checklists and method statements and to produce neat, labelled work using common hand tools.</p> <p> Comfortable using a laptop, office applications, mobile service applications and web-based configuration tools.</p> <p> Ability to read technical English and communicate clearly in Arabic; functional spoken and written English is required for manuals and support communication.</p> <p> Accurate documentation habits, attention to detail and willingness to follow configuration control, escalation and site-safety procedures.</p> <p> Willingness to travel to project sites and work outdoors or in operational facilities when required.</p> <p> Responsible attitude, punctuality, teamwork, problem-solving ability and commitment to continuous self-learning.</p>
<p>The Automation Engineer is responsible for ensuring the safe, reliable, and efficient operation of all automation, control, PLC, SCADA, communication, and industrial network systems supporting the container terminal. The role focuses on maintaining and improving the performance of semi-automated Ship-to-Shore (STS) cranes, Rubber-Tyred Gantry (RTG) cranes, and associated terminal automation systems to maximize equipment availability and operational efficiency. The Automation Engineer works closely with Maintenance, Operations, IT, OEMs, and contractors to troubleshoot automation issues, implement system improvements, and support digitalization and predictive maintenance initiatives.</p><p>KEY ACCOUNTABILITIES</p><p>Automation & Control Systems</p><ul><li>Maintain, troubleshoot, and optimize PLC, HMI, SCADA, and control systems for semi-automated STS and RTG cranes.</li><li>Perform software modifications, diagnostics, commissioning, and system testing.</li><li>Ensure all automation systems operate safely, reliably, and in accordance with OEM standards.</li></ul><p>PLC Programming & Industrial Control</p><ul><li>Develop, modify, troubleshoot, and maintain PLC programs using Siemens TIA Portal/STEP 7 and other OEM platforms.</li><li>Configure and maintain remote I/O, safety PLCs, VFDs, encoders, sensors, laser positioning, and motion control systems.</li><li>Perform software backups, version control, and restoration of PLC and automation programs.</li></ul><p>Automation Servers & OT Infrastructure</p><ul><li>Maintain the automation server infrastructure supporting crane operations, including application servers, engineering workstations, databases, and virtual environments.</li><li>Monitor server performance, system health, storage capacity, backups, redundancy, and disaster recovery.</li><li>Coordinate software updates, patches, and system upgrades with OEMs and the IT Department while minimizing operational disruption.</li></ul><p>Remote Operation & Communication Systems</p><ul><li>Maintain and troubleshoot communication between Liebherr Automation Servers, STS/RTG cranes, Remote Operator Stations (ROS), Engineering Workstations, and the Terminal Operating System (TOS).</li><li>Support and maintain the wireless/radio communication network used for remote operation of RTGs, ensuring reliable communication between the RTGs, ROS stations, and central automation servers.</li><li>Diagnose and resolve communication failures, latency, synchronization issues, and network interruptions affecting crane operation.</li></ul><p>Industrial Networks</p><ul><li>Maintain and troubleshoot industrial communication networks including Fiber Optic networks, Industrial Ethernet, Profinet, Profibus, Modbus TCP/IP, Ethernet/IP, managed switches, routers, wireless access points, and communication gateways.</li><li>Ensure high network availability, redundancy, cybersecurity, and reliable data exchange between automation devices.</li></ul><p>Camera & Vision Systems</p><ul><li>Maintain, configure, and troubleshoot all crane camera and vision systems, including spreader, trolley, boom, gantry, hoist, anti-collision, OCR, and CCTV cameras.</li><li>Ensure reliable video transmission, recording, and display at Remote Operator Stations.</li><li>Coordinate calibration, replacement, and commissioning of cameras and vision equipment.</li></ul><p>System Integration</p><ul><li>Support integration and communication between crane automation systems, PLCs, SCADA, ROS, TOS, CMMS, drive systems, anti-collision systems, positioning systems, and other terminal operational technologies.</li><li>Work closely with OEMs and IT to ensure seamless integration of new automation technologies and software upgrades.</li></ul><p>CMMS & Reliability</p><ul><li>Develop preventive maintenance plans for automation systems using the CMMS.</li><li>Record maintenance activities, software revisions, equipment history, and recurring failures.</li><li>Perform Root Cause Analysis (RCA) and implement corrective actions to improve equipment reliability and reduce downtime.</li></ul><p>Cybersecurity & Data Integrity</p><ul><li>Support OT cybersecurity by maintaining secure user access, backup procedures, antivirus protection, network segmentation, and disaster recovery plans.</li><li>Ensure automation software, PLC programs, and server configurations are securely backed up and protected against unauthorized access.</li></ul><p>Technical Support & Continuous Improvement</p><ul><li>Provide technical support during equipment breakdowns and commissioning activities.</li><li>Lead automation fault investigations and recommend system improvements to increase equipment availability and operational efficiency.</li><li>Evaluate new technologies and recommend automation enhancements that improve safety, reliability, and productivity.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in electrical engineering, Automation Engineering, Control Systems, Mechatronics, or a related discipline.</li><li>Professional certification in PLC programming, industrial automation, or control systems is preferred.</li><li>Minimum 5 years of experience in industrial automation or electrical control systems, preferably within a container terminal, port, or heavy industrial environment.</li><li>Proven experience with semi-automated STS and RTG cranes and OEM automation systems (e.g., Liebherr, Siemens, ABB, Konecranes, or ZPMC).</li><li>Hands-on experience with PLC, SCADA, HMI, VFDs, industrial networks, automation servers, Remote Operator Stations (ROS), radio communication systems, camera systems, and Terminal Operating System (TOS) integration.</li><li>Experience using CMMS/EAM systems (e.g., SAP PM, Maximo, Hexagon) for maintenance planning and asset management.</li><li>Strong troubleshooting, commissioning, Root Cause Analysis (RCA), and contractor/OEM coordination experience.</li></ul>
Receive email alerts for Mechatronics Engineers Jobs in Oman jobs
You can cancel your email alert at anytime