Factory Jobs
2936 Jobs Found
Save and set alert for similar positionsManage alerts
<p><h4>Position summary</h4>
<p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests and employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest and employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security and loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents or thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary and daily activity report. Maintain confidentiality of all security, loss prevention, and property reports or documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p>
<p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs</p><p></p>
<p>The Sultan s School, Oman The Sultan s School seeks to appoint an inspirational and dynamic Secondary Geography Teacher to join their school in August 2027. This is an exciting opportunity for a passionate Geography teacher with energy, ideas and ambition to inspire students and contribute to a thriving Humanities department. For the right candidate, there may also be an opportunity to take on the role of Head of Humanities. The successful candidate will be an enthusiastic classroom practitioner who can engage students through an ambitious, relevant and engaging Geography curriculum, while contributing positively to the wider life of the school.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for someone who:</p><ul><li>Is an outstanding and inspirational Geography teacher</li><li>Brings energy, personality, creativity and ambition</li><li>Delivers engaging and challenging Geography lessons</li><li>Can contribute positively to the development of the Humanities curriculum</li><li>Is committed to extracurricular activities, trips and wider school life</li><li>Is collaborative, culturally aware and keen to share excellent practice</li><li>Has the leadership skills and experience to potentially lead the Humanities department</li></ul><p>Requirements: Minimum 2 years post-qualifying teaching experience; Bachelor s degree closely related to your teaching subject; recognised teaching qualification such as PGCE, QTS or equivalent; under 60 years of age due to visa restrictions. Safer recruitment checks will apply. Please contact your Edvectus consultant for further information.</p>
<p><h4>Position summary</h4>
<p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests and employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest and employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security and loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents or thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary and daily activity report. Maintain confidentiality of all security, loss prevention, and property reports and documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p>
<p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs;</p><p></p>
<p><h4>Position summary</h4>
<p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests and employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest and employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security and loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents and thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary and daily activity report. Maintain confidentiality of all security, loss prevention, and property reports and documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p>
<p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist</p><p></p>
<p>Manage the complete day-to-day operations of the automotive service centre/workshop. Ensure efficient vehicle reception, diagnosis, repair, maintenance, quality inspection, and delivery. Monitor workshop productivity, efficiency, utilisation, and bay capacity. Ensure vehicles are serviced and repaired according to manufacturer standards and company procedures. Implement processes to minimise turnaround time and improve workshop efficiency. Lead and manage Service Advisors, Workshop Supervisors, Technicians, Diagnostic Technicians, Auto Electricians, and support staff. Plan manpower requirements, technician allocation, and workshop schedules. Conduct regular performance reviews and identify training requirements. Motivate the service team to achieve operational and financial targets. Ensure high levels of customer satisfaction and service quality. Handle escalated customer complaints and resolve technical/service-related issues. Monitor customer feedback, repeat repairs, warranty issues, and service complaints. Develop strategies to improve customer retention and repeat business. Achieve monthly and annual service revenue and profitability targets. Monitor labour sales, parts sales, service packages, and other workshop revenue. Control workshop operating costs and improve gross margins. Monitor KPIs including labour utilisation, productivity, efficiency, first-time-fix rate, CSI, and workshop profitability. Prepare regular operational and performance reports for senior management. Ensure accurate diagnosis and high-quality repairs. Support technicians in resolving complex technical problems. Ensure proper use of diagnostic equipment and workshop tools. Maintain compliance with manufacturer technical standards, safety procedures, and quality requirements. Monitor warranty claims and ensure proper documentation.</p><p><strong>Desired Candidate Profile</strong></p><p>NA</p>
<p><strong>1. Inspection & Quality Control</strong></p><ul><li>Supervise and monitor coating activities including surface preparation, painting, and final coating.</li><li>Ensure compliance with approved <strong>ITP (Inspection & Test Plan)</strong> and project specifications.</li><li>Conduct inspections for:<ul><li>Surface preparation (blasting, cleanliness SA 2.5 / SA 3)</li><li>Profile measurement (anchor profile)</li><li>Coating thickness (DFT/WFT)</li><li>Holiday testing</li><li>Adhesion testing</li></ul></li><li>Verify environmental conditions (temperature, humidity, dew point) before and during coating.</li></ul><p><strong>2. Standards & Compliance</strong></p><ul><li>Ensure coatings comply with standards such as:<ul><li>ISO 12944</li><li>NACE / SSPC</li><li>ASTM standards</li><li>Project-specific coating specifications</li></ul></li><li>Ensure correct paint systems are applied (e.g., epoxy, polyurethane, anti-corrosion coatings).</li></ul><p><strong>3. Documentation & Reporting</strong></p><ul><li>Maintain and review coating inspection reports.</li><li>Record daily inspection reports (DIRs) and test results.</li><li>Validate paint batch certificates and material approvals.</li><li>Ensure traceability of coating materials.</li><li>Support preparation of final QC dossiers.</li></ul><p><strong>4. Material Control</strong></p><ul><li>Verify storage and handling of coating materials as per manufacturer recommendations.</li><li>Check shelf life and batch numbers of paints.</li><li>Ensure correct mixing ratios and application procedures.</li></ul><p><strong>5. Coordination</strong></p><ul><li>Coordinate with:<ul><li>Production/Construction teams</li><li>Client inspectors</li><li>Third-party inspectors</li></ul></li><li>Attend inspection requests (IRs) and witness hold points with client.</li></ul><p><strong>6. NCR & Corrective Actions</strong></p><ul><li>Raise Non-Conformance Reports (NCRs) for deviations.</li><li>Ensure corrective and preventive actions are implemented.</li><li>Monitor rework activities and closure of NCRs.</li></ul><p><strong>7. Safety & Compliance</strong></p><ul><li>Ensure coating activities follow HSE guidelines.</li><li>Monitor safe handling of chemicals, paints, and solvents.</li><li>Promote safe work practices in blasting and painting operations.</li></ul>
<p><strong>1. Inspection & Quality Control</strong></p><ul><li>Supervise and monitor coating activities including surface preparation, painting, and final coating.</li><li>Ensure compliance with approved <strong>ITP (Inspection & Test Plan)</strong> and project specifications.</li><li>Conduct inspections for:<ul><li>Surface preparation (blasting, cleanliness SA 2.5 / SA 3)</li><li>Profile measurement (anchor profile)</li><li>Coating thickness (DFT/WFT)</li><li>Holiday testing</li><li>Adhesion testing</li></ul></li><li>Verify environmental conditions (temperature, humidity, dew point) before and during coating.</li></ul><p><strong>2. Standards & Compliance</strong></p><ul><li>Ensure coatings comply with standards such as:<ul><li>ISO 12944</li><li>NACE / SSPC</li><li>ASTM standards</li><li>Project-specific coating specifications</li></ul></li><li>Ensure correct paint systems are applied (e.g., epoxy, polyurethane, anti-corrosion coatings).</li></ul><p><strong>3. Documentation & Reporting</strong></p><ul><li>Maintain and review coating inspection reports.</li><li>Record daily inspection reports (DIRs) and test results.</li><li>Validate paint batch certificates and material approvals.</li><li>Ensure traceability of coating materials.</li><li>Support preparation of final QC dossiers.</li></ul><p><strong>4. Material Control</strong></p><ul><li>Verify storage and handling of coating materials as per manufacturer recommendations.</li><li>Check shelf life and batch numbers of paints.</li><li>Ensure correct mixing ratios and application procedures.</li></ul><p><strong>5. Coordination</strong></p><ul><li>Coordinate with:<ul><li>Production/Construction teams</li><li>Client inspectors</li><li>Third-party inspectors</li></ul></li><li>Attend inspection requests (IRs) and witness hold points with client.</li></ul><p><strong>6. NCR & Corrective Actions</strong></p><ul><li>Raise Non-Conformance Reports (NCRs) for deviations.</li><li>Ensure corrective and preventive actions are implemented.</li><li>Monitor rework activities and closure of NCRs.</li></ul><p><strong>7. Safety & Compliance</strong></p><ul><li>Ensure coating activities follow HSE guidelines.</li><li>Monitor safe handling of chemicals, paints, and solvents.</li><li>Promote safe work practices in blasting and painting operations.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>1. Inspection & Quality Control</strong><ul><li>Supervise and monitor coating activities including surface preparation, painting, and final coating.</li><li>Ensure compliance with approved <strong>ITP (Inspection & Test Plan)</strong> and project specifications.</li><li>Conduct inspections for:<ul><li>Surface preparation (blasting, cleanliness – SA 2.5 / SA 3)</li><li>Profile measurement (anchor profile)</li><li>Coating thickness (DFT/WFT)</li><li>Holiday testing</li><li>Adhesion testing</li></ul></li><li>Verify environmental conditions (temperature, humidity, dew point) before and during coating.</li></ul><strong>2. Standards & Compliance</strong><ul><li>Ensure coatings comply with standards such as:<ul><li>ISO 12944</li><li>NACE / SSPC</li><li>ASTM standards</li><li>Project-specific coating specifications</li></ul></li><li>Ensure correct paint systems are applied (e.g., epoxy, polyurethane, anti-corrosion coatings).</li></ul><strong>3. Documentation & Reporting</strong><ul><li>Maintain and review coating inspection reports.</li><li>Record daily inspection reports (DIRs) and test results.</li><li>Validate paint batch certificates and material approvals.</li><li>Ensure traceability of coating materials.</li><li>Support preparation of final QC dossiers.</li></ul><strong>4. Material Control</strong><ul><li>Verify storage and handling of coating materials as per manufacturer recommendations.</li><li>Check shelf life and batch numbers of paints.</li><li>Ensure correct mixing ratios and application procedures.</li></ul><strong>5. Coordination</strong><ul><li>Coordinate with:<ul><li>Production/Construction teams</li><li>Client inspectors</li><li>Third-party inspectors</li></ul></li><li>Attend inspection requests (IRs) and witness hold points with client.</li></ul><strong>6. NCR & Corrective Actions</strong><ul><li>Raise Non-Conformance Reports (NCRs) for deviations.</li><li>Ensure corrective and preventive actions are implemented.</li><li>Monitor rework activities and closure of NCRs.</li></ul><strong>7. Safety & Compliance</strong><ul><li>Ensure coating activities follow HSE guidelines.</li><li>Monitor safe handling of chemicals, paints, and solvents.</li><li>Promote safe work practices in blasting and painting operations.</li></ul> </div>
<p> </p> <ul> <li>Design, develop, customize, and enhance Temenos T24 Core Banking applications and modules in accordance with banking requirements and Temenos standards.</li> <li>Gather, analyze, and translate business requirements into detailed technical specifications.</li> <li>Perform end-to-end T24 application development, testing, debugging, and implementation.</li> <li>Integrate T24 with third-party systems, including payment systems, CRM, and regulatory reporting platforms, using OFS, APIs, web services, and MQ messaging.</li> <li>Manage, monitor, troubleshoot, and optimize T24 COB, EOD, and BOD batch processes to ensure system stability and performance.</li> <li>Perform TAFJ administration and provide technical support for TAFC and TAFJ environments, including T24 on Oracle.</li> <li>Troubleshoot application issues, analyze T24 logs, and resolve performance and connectivity problems.</li> <li>Support T24 interfaces and connectivity technologies, including TWS, IRIS, TOCF, OFS, and OFSML.</li> <li>Work with T24 banking modules such as AA, Customer, Accounts, Deposits, Payments (FT/TT), Delivery, MG, and LD.</li> <li>Support banking payment processes, including SWIFT, RTGS, and ACH.</li> <li>Maintain data integrity, review correction entries, and identify General Ledger (GL) mismatches.</li> <li>Assist business users during requirements gathering, system testing, and User Acceptance Testing (UAT).</li> <li>Follow change management procedures, version control, and deployment standards to ensure secure and reliable releases.</li> <li>Coordinate with business stakeholders and technical teams to resolve critical production issues and deliver enhancements within agreed timelines.</li> <li>Ensure compliance with banking regulatory, audit, security, and governance requirements.<strong>Role & responsibilities</strong> </li> </ul> <br> <br> <p> <strong>Preferred candidate profile</strong> </p> <p> Minimum 7 years of hands-on Temenos T24 experience, preferably including banking implementations and Middle East banking exposure. </p> <br>
<p>Role - ELV Supervisor - CCTV, access control & ELV systems. Location - Oman Experience - 4-9 Years Qualification: Electrical/Electronics/ Instrumentation Contract Duration: Open Initially 2 years and extendable Mandatory Skills - Experience working with Dahua, Hikvision, or similar ELV/security system companies, with hands-on exposure to CCTV, access control, and related ELV systems. Roles & responsibility - Installation, servicing / maintenance, testing, commissioning of IP Surveillance Systems and Access, Control Systems, Gate Barriers, or related equipments. Follow the drawing of electrical layouts and building plans in accordance with NSI and relevant Codes of Practice/Policies. Knowledge of IP Systems / Networking is preferable. Knowledge of any of the following system Access control, CCTV and gate Barrier, PA System, Video wall System, third Party VMS system like Milestone etc. Manufacturers training for any of the following equipment including AVIGILON, Bosch, PELCO, Hikvision, DAHUA, G4s, AMG Any kind of Certification on VMS System is an added advantage.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience working with Dahua, Hikvision, or similar ELV/security system companies, with hands-on exposure to CCTV, access control, and related ELV systems.</li><li>Knowledge of IP Systems / Networking is preferable.</li><li>Knowledge of any of the following system Access control, CCTV and gate Barrier, PA System, Video wall System, third Party VMS system like Milestone etc.</li><li>Manufacturers training for any of the following equipment including AVIGILON, Bosch, PELCO, Hikvision, DAHUA, G4s, AMG</li><li>Any kind of Certification on VMS System is an added advantage.</li></ul>
<p>URGENT HIRING LIWAN DESIGN, OMAN Greetings from Ambe Consultancy Services Mumbai! Walkin for Face-to-face interview with client from 7 / 8 & 9th October 2026 at following address. Ambe Consultancy Services Mumbai Address: Amore Building, 6th Floor, Khar 2nd & 4th Road, Near Khar Station, Khar -, West., Mumbai, Maharashtra Contact: Mr. Milind WhatsApp: OR Email: VACANCIES 1. Draftsman Architectural (Req 6 Nos / Min 5 yrs Exp) Designing high-rise buildings requires a careful balance between structural engineering, functional space planning, and environmental sustainability. Essential Software Skills Autodesk Revit : The core platform used to build the data-rich, 3D intelligent BIM model and generate all architectural, structural, and MEP construction documents. CSI ETABS : The definitive industry standard for structural analysis , specifically engineered to calculate massive gravity loads, high-altitude wind pressures, and seismic forces on tall buildings. 2. Draftsman 3D & BIM (Req 6 Nos / Min 5 yrs Exp) Creates precise 2D technical drawings and intelligent 3D models for construction High Rise and infrastructure projects. Essential Software Skills Drafting: Autodesk AutoCAD for standard 2D and 3D technical layouts. BIM Modeling: Autodesk Revit for intelligent building models. Infrastructure: Autodesk Civil 3D for roads, highways, and land development. Coordination: Navisworks or BIM 360 for project review and clash detection. 3. Accountant - (Req 2 Nos / Min 5 yrs Exp in Real Estate Accounting) Walkin for Face to face interview with client from 7 / 8 & 9th October 2026 OR Share your Updated CV Immediately Ambe Consultancy Services Mumbai Regards</p>
<p>Loadout Planning & Engineering Develop comprehensive loadout plans, methodologies, and execution procedures for offshore modules, skids, jackets, and heavy structures. Review loadout drawings, transport analyses, sea-fastening arrangements, and structural integrity requirements. Coordinate with Engineering, Construction, Marine, and QA/QC teams to ensure readiness for loadout operations. Verify load distribution, bearing pressure calculations, stability calculations, and transportation analysis.</p><p>Execution & Coordination Supervise module loadout operations using SPMTs, skidding systems, trailers, and load transfer systems. Coordinate with marine contractors, vessel representatives, surveyors, and clients during loadout activities. Monitor critical lifting, ballasting, de-ballasting, and vessel positioning activities. Ensure all loadout activities are executed as per approved method statements and risk assessments. Conduct pre-loadout inspections and readiness reviews.</p><p>HSE & Compliance Ensure compliance with company HSE policies, project specifications, and international marine transportation standards. Participate in HAZID, HAZOP, SIMOPS, JSA, toolbox talks, and risk assessments related to loadout activities. Monitor implementation of safety controls during transportation and load transfer operations. Investigate and report loadout-related incidents, near misses, and non-conformities.</p><p>Technical Coordination Liaise with structural, transportation, marine warranty surveyors, and client representatives. Monitor structural behavior during loadout and transportation operations. Coordinate sea-fastening fabrication and installation activities. Ensure all loadout equipment certificates, inspection records, and test reports are valid and available.</p><p>Documentation & Reporting Prepare loadout schedules, progress reports, lessons learned, and completion dossiers. Develop and maintain loadout checklists, inspection records, and operational documentation. Support project teams during client audits and compliance reviews.</p>
<p>Role & responsibilities To safely operate, monitor, and maintain CAT 3516H Gas Engine Generator sets during assigned shift at IPGF Power Plant. Ensure maximum gen-set availability, compliance with OEM and IPGF SOP, and zero safety incidents while meeting plant generation targets Preferred candidate profile Gas Engine Generator Power Plant Operations: Conduct pre-start inspections on the CAT 3516H, including checks on lube oil, jacket water, gas fuel pressure, batteries, air filters, and the gas detection system. Carry out safe start-up, synchronization, loading, and shutdown procedures utilizing the EMCP 4.x control panel. Monitor generator set parameters such as kW, power factor, exhaust temperature, jacket water temperature, oil pressure, ignition coil status, and AFR valve position. Acknowledge and troubleshoot EMCP alarms using SPN/FMI codes; implement corrective measures or escalate as necessary. Address common faults associated with the 3516H, including Low Gas Pressure SD, Crank Terminate, Ignition Misfire, High JW Temperature, and CAN Communication Error. Perform operator-level maintenance tasks such as draining gas train filters, inspecting spark plugs, belts, breathers, and verifying sensor functionality. Assist with scheduled maintenance activities, including spark plug replacements, oil changes, valve lash adjustments, and aftercooler cleaning. Ensure adherence to Lockout/Tag out and Permit-to-Work procedures at IPGF. Uphold IPGF HSE regulations, gas safety protocols, hot work, and confined space permits. Engage in toolbox talks, mock drills, and incident investigations. Keep an accurate shift logbook & records, documenting run hours, kWh, gas consumption, alarms..</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Loadout</span> <span>Planning</span> <span>&</span> <span>Engineering</span><ul><li><span>Develop</span> <span>comprehensive</span> <span>loadout</span> <span>plans,</span> <span>methodologies,</span> <span>and</span> <span>execution</span> <span>procedures</span> <span>for</span> <span>offshore</span> <span>modules,</span> <span>skids,</span> <span>jackets,</span> <span>and</span> <span>heavy</span> <span>structures.</span></li><li><span>Review</span> <span>loadout</span> <span>drawings,</span> <span>transport</span> <span>analyses,</span> <span>sea-fastening</span> <span>arrangements,</span> <span>and</span> <span>structural</span> <span>integrity</span> <span>requirements.</span></li><li><span>Coordinate</span> <span>with</span> <span>Engineering,</span> <span>Construction,</span> <span>Marine,</span> <span>and</span> <span>QA/QC</span> <span>teams</span> <span>to</span> <span>ensure</span> <span>readiness</span> <span>for</span> <span>loadout</span> <span>operations.</span></li><li><span>Verify</span> <span>load</span> <span>distribution,</span> <span>bearing</span> <span>pressure</span> <span>calculations,</span> <span>stability</span> <span>calculations,</span> <span>and</span> <span>transportation</span> <span>analysis.</span></li></ul><span>Execution</span> <span>&</span> <span>Coordination</span><ul><li>Supervise module loadout <span>operations</span> <span>using</span> <span>SPMTs,</span> <span>skidding</span> <span>systems,</span> <span>trailers,</span> <span>and</span> <span>load</span> <span>transfer</span> <span>systems.</span></li><li><span>Coordinate</span> <span>with</span> <span>marine</span> <span>contractors,</span> <span>vessel</span> <span>representatives,</span> <span>surveyors,</span> <span>and</span> <span>clients</span> <span>during</span> <span>loadout</span> <span>activities.</span></li><li><span>Monitor</span> <span>critical</span> <span>lifting,</span> <span>ballasting,</span> <span>de-ballasting,</span> <span>and</span> <span>vessel</span> <span>positioning</span> <span>activities.</span></li><li><span>Ensure</span> <span>all</span> <span>loadout</span> <span>activities</span> <span>are</span> <span>executed</span> <span>as</span> <span>per</span> <span>approved</span> <span>method</span> <span>statements</span> <span>and</span> <span>risk</span> <span>assessments.</span></li><li><span>Conduct</span> <span>pre-loadout</span> <span>inspections</span> <span>and</span> <span>readiness</span> <span>reviews.</span></li></ul><span>HSE</span> <span>&</span> <span>Compliance</span><ul><li><span>Ensure</span> <span>compliance</span> <span>with</span> <span>company</span> <span>HSE</span> <span>policies,</span> <span>project</span> <span>specifications,</span> <span>and</span> <span>international</span> <span>marine</span> <span>transportation</span> <span>standards.</span></li><li><span>Participate</span> <span>in</span> <span>HAZID,</span> <span>HAZOP,</span> <span>SIMOPS,</span> <span>JSA,</span> <span>toolbox</span> <span>talks,</span> <span>and</span> <span>risk</span> <span>assessments</span> <span>related</span> <span>to</span> <span>loadout</span> <span>activities.</span></li><li><span>Monitor</span> <span>implementation</span> <span>of</span> <span>safety</span> <span>controls</span> <span>during</span> <span>transportation</span> <span>and</span> <span>load</span> <span>transfer</span> <span>operations.</span></li><li><span>Investigate</span> <span>and</span> <span>report</span> <span>loadout-related</span> <span>incidents,</span> <span>near</span> <span>misses,</span> <span>and</span> <span>non-conformities.</span></li></ul><span>Technical</span> <span>Coordination</span><ul><li><span>Liaise</span> <span>with</span> <span>structural,</span> <span>transportation,</span> <span>marine</span> <span>warranty</span> <span>surveyors,</span> <span>and</span> <span>client</span> <span>representatives.</span></li><li><span>Monitor</span> <span>structural</span> <span>behavior</span> <span>during</span> <span>loadout</span> <span>and</span> <span>transportation</span> <span>operations.</span></li><li><span>Coordinate</span> <span>sea-fastening</span> <span>fabrication</span> <span>and</span> <span>installation</span> <span>activities.</span></li><li><span>Ensure</span> <span>all</span> <span>loadout</span> <span>equipment</span> <span>certificates,</span> <span>inspection</span> <span>records,</span> <span>and</span> <span>test</span> <span>reports</span> <span>are</span> <span>valid</span> <span>and</span> <span>available.</span></li></ul><span>Documentation</span> <span>&</span> <span>Reporting</span><ul><li><span>Prepare</span> <span>loadout</span> <span>schedules,</span> <span>progress</span> <span>reports,</span> <span>lessons</span> <span>learned,</span> <span>and</span> <span>completion</span> <span>dossiers.</span></li><li><span>Develop</span> <span>and</span> <span>maintain</span> <span>loadout</span> <span>checklists,</span> <span>inspection</span> <span>records,</span> <span>and</span> <span>operational</span> <span>documentation.</span></li><li><span>Support</span> <span>project</span> <span>teams</span> <span>during</span> <span>client</span> <span>audits</span> <span>and</span> <span>compliance</span> <span>reviews.</span></li></ul><br> </div>
<p>Workshop & Service Operations Manage the complete day-to-day operations of the automotive service centre/workshop. Ensure efficient vehicle reception, diagnosis, repair, maintenance, quality inspection, and delivery. Monitor workshop productivity, efficiency, utilisation, and bay capacity. Ensure vehicles are serviced and repaired according to manufacturer standards and company procedures. Implement processes to minimise turnaround time and improve workshop efficiency. Team Management Lead and manage Service Advisors, Workshop Supervisors, Technicians, Diagnostic Technicians, Auto Electricians, and support staff. Plan manpower requirements, technician allocation, and workshop schedules. Conduct regular performance reviews and identify training requirements. Motivate the service team to achieve operational and financial targets. Customer Service Ensure high levels of customer satisfaction and service quality. Handle escalated customer complaints and resolve technical/service-related issues. Monitor customer feedback, repeat repairs, warranty issues, and service complaints. Develop strategies to improve customer retention and repeat business. Business & Financial Management Achieve monthly and annual service revenue and profitability targets. Monitor labour sales, parts sales, service packages, and other workshop revenue. Control workshop operating costs and improve gross margins. Monitor KPIs including labour utilisation, productivity, efficiency, first-time-fix rate, CSI, and workshop profitability. Prepare regular operational and performance reports for senior management. Technical & Quality Control Ensure accurate diagnosis and high-quality repairs. Support technicians in resolving complex technical problems. Ensure proper use of diagnostic equipment and workshop tools. Maintain compliance with manufacturer technical standards, safety procedures, and quality requirements. Monitor warranty claims and ensure proper documentation.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Position Summary:</p><p><br></p><p>We are looking for an experienced and responsible Heavy Duty Truck Driver (10 Ton) to join our team. The candidate will be responsible for transporting goods safely, efficiently, and on schedule.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Transportation: Safely drive and operate a 10 Ton truck for transporting materials/goods across locations.</p><p>Vehicle Inspection: Conduct daily pre-trip and post-trip vehicle inspections (checking oil level, tyres, brakes, fuel, coolant, etc.).</p><p>Safety Compliance: Strictly follow all local traffic laws, speed limits, and safety regulations.</p><p>Loading & Unloading: Oversee the loading and unloading of materials to ensure proper weight distribution.</p><p>Documentation: Maintain accurate delivery records, logbooks, delivery notes, and fuel receipts.</p><p>Maintenance: Keep the vehicle clean, well-maintained, and report any mechanical issues or repairs immediately to management.</p><p>Requirements / Qualifications:</p><p><br></p><p>Driving License: Valid Heavy Vehicle Driving License (Oman driving license based on your location setup).</p><p>Experience: Minimum 2 to 4 years of experience driving 10 Ton heavy trucks in the Gulf region.</p><p>Knowledge: Good knowledge of local routes, highways, and transport regulations.</p><p>Languages: Basic English communication skills (Hindi/Urdu is an added advantage).</p><p>Physical Fitness: Good physical condition and clean driving record (No major traffic violations or accidents).</p><p>Key Candidate Details:</p><p><br></p><p>Job Role: Driving </p><p>Career Level: Mid-Career / Entry Level</p><p>Employment Type: Full-Time</p><p>Gender: Male</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p><b>Heavy Vehicle Driving</b></p><p><b>10 Ton Truck Operation</b></p><p><b>Valid Heavy Driving License</b></p><p><b>Route Knowledge & Navigation</b></p><p><b>Vehicle Inspection & Basic Maintenance</b></p><p><b>Cargo Safety & Material Handling</b></p><p><b>Safe Driving & Traffic Compliance</b></p><p><b>Delivery Record Keeping</b></p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><br></p><p><br></p><p><b>Job Title: Industrial Applications Support Engineer</b></p><p><b>Job Summary: </b>We are seeking an experienced L2 Industrial Applications Support Engineer to provide operational and technical support for business-critical petroleum and industrial applications. The role is responsible for application troubleshooting, incident and request resolution, user support, application administration, deployments, upgrades, and vendor coordination, while ensuring application availability and reliability. </p><p><br></p><p><b>Key Applications </b></p><p>· AVEVA PI System / PI Vision </p><p>· GE Digital APM / Meridium </p><p>· AspenTech applications </p><p>· Hexagon SmartPlant applications </p><p>· LabWare LIMS </p><p>· Other petroleum, engineering, and industrial applications </p><p><br></p><p><b>Experience with all platforms is preferred; strong hands-on experience with several of the above applications is essential.</b></p><p><b>Key Responsibilities:</b></p><p><br></p><p>· Provide L2 application support and troubleshooting for petroleum and industrial </p><p> applications. </p><p>· Manage application-related incidents and service requests within agreed SLAs. </p><p>· Troubleshoot application, client, server, connectivity, access, and performance </p><p> issues. </p><p>· Perform application installation, configuration, upgrades, patches, and </p><p> deployments. </p><p>· Support application access, Active Directory groups, service accounts, certificates, </p><p> and licenses. </p><p>· Support applications delivered through Citrix and VDI environments. </p><p>· Perform application health checks following server patching, maintenance, outages, </p><p> and changes. </p><p>· Support Change Management activities including implementation, testing, </p><p> validation, and rollback. </p><p>· Assist application SMEs and business users during UAT and application releases. </p><p>· Coordinate complex issues with infrastructure, cybersecurity, database teams, </p><p> SMEs, and third-party vendors. </p><p>· Investigate recurring incidents, contribute to Root Cause Analysis (RCA), and </p><p> implement appropriate workarounds. </p><p>· Maintain application SOPs, technical documentation, troubleshooting guides, and </p><p> Knowledge Base articles. </p><p>· Participate in maintenance activities and on-call support for critical/P1 incidents </p><p> when require</p><p><br></p><p><b>Technical Requirements </b></p><p>· Bachelor's degree in Computer Science, IT, Engineering, or a related discipline. </p><p>· 3-6 years of experience in Application Support, Production Support, or a similar </p><p> technical role. </p><p>· Hands-on experience with several of: AVEVA PI / PI Vision, GE APM </p><p> / Meridium, AspenTech, SmartPlant, and LabWare LIMS. </p><p>· Experience supporting applications in Oil & Gas, Petroleum, Energy, or Industrial </p><p> environments is highly preferred. </p><p>· Good knowledge of Windows Server, Active Directory, SQL/databases, Citrix/VDI, </p><p> application and Windows logs, certificates, service accounts, client/server </p><p> architecture, and basic network troubleshooting. </p><p>· Knowledge of PowerShell, SCCM, IIS, APIs, or application monitoring tools is an </p><p> advantage. </p><p><br></p><p><b>IT Service Management Knowledge </b></p><p>· Incident Management </p><p>· Service Request Management </p><p>· Problem Management </p><p>· Change Management </p><p>· Root Cause Analysis </p><p>· SLA Management </p><p>· Knowledge Management </p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p><b>ITIL knowledge or certification is preferred.</b></p><p><br></p><p><b>Key Competencies</b></p><p>· Strong troubleshooting and analytical skills. </p><p>· Good communication and customer-support skills. </p><p>· Ability to coordinate with multiple technical teams and application vendors. </p><p>· Ability to manage multiple incidents and requests based on priority and business </p><p> impact. </p><p>· Strong technical documentation skills. </p><p>· Ability to work independently and escalate appropriately. </p><p>· Strong attention to detail when supporting production environments. </p><p><br></p><p><b>Preferred Profile</b></p><p>A hands-on L2 Application Support Engineer with experience supporting petroleum or industrial applications, particularly AVEVA PI, GE APM/Meridium, AspenTech, SmartPlant, and/or LabWare LIMS, who can independently troubleshoot issues while coordinating more complex problems with SMEs and vendors. </p></div>
<p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Prepare ingredients for cooking, including portioning, chopping, and storing food. Wash and peel fresh fruits and vegetables. Weigh, measure, and mix ingredients. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Operate ovens, stoves, grills, microwaves, and fryers. Test foods to determine if they have been cooked sufficiently. Monitor food quality while preparing food. Set-up and break down work station. Serve food in proper portions onto proper receptacles. Wash and disinfect kitchen area, tables, tools, knives, and equipment. Check and ensure the correctness of the temperature of appliances and food.</p> <p> </p> <p>Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time or for an entire work shift. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>PREFERRED QUALIFICATION</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: At least 1 year of related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p>
<p><b>Job Description</b></p><p>• Prepare and update Project base line schedule in P-6, and its revision when required with all supporting documents for submission to Client / Consultant.</p><p>• Review the schedule revisions/updates with the consultant/ client for approvals.</p><p>• Preparation of daily/ weekly/ monthly reports for consultant/ client/ Management related to the project stats updates.</p><p>• Prepares the supporting documents (impact schedule or any such document required by contracts) required to submit Time Extension Claim to be submitted to contracts Department.</p><p>• Preparing Master Budgets / Revisions for the project under guidance of Project Manager/Director with assistance from Cost controller. The same to be reviewed by Planning Manager before it is submitted to project manager for review by various heads and to be put upon to Unit Head for his approval and subsequent approval from CEO.</p><p>• Daily and monthly monitoring of the actual cost against the budget and report to project manager with variance analysis and mitigation plan.</p><p>• Prepare, update, Monitor and revise the business plan under guidance of Project Manager and submit to Unit head for review.</p><p>• Prepare maintain and update the data base of the resources with the project. Prepare the Rolling projections for resources manpower and equipment on monthly basis to be submitted through the ERP .</p><p>• Compile the Daily progress report of project and submit it to project manager, Unit head.</p><p>• Prepare, maintain and update the project documents required by MSP for the audit from corporate QHSE and attend the auditor as and when audit is scheduled.</p><p><br></p><p><b>Requirements</b></p><p>B.E (Civil Engineering) with 12- 15 Years relevant experience.th 12- 15 Years relevant experience.</p><p><strong>Desired Candidate Profile</strong></p><p>B.E (Civil Engineering) with 12- 15 Years relevant experience.</p>
<p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Our jobs aren t just about putting food on the table that our guests will enjoy until they ask for their bill. Instead, we want to build an experience that is memorable and unique with food and drinks on the side. Our Guest Service Experts take the initiative and deliver a wide range of services to make sure that guests enjoy their meal. Whether setting tables, communicating with the kitchen, interacting and serving guests, or cleaning work areas and supplies, the Guest Service Expert makes transactions feel like part of the experience.</p> <p> </p> <p>No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Service Experts will be on their feet and moving around (stand, sit, or walk for an extended time; moving over sloping, uneven, or slippery surfaces), managing the menu (read and visually verify information), and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and 50 pounds with assistance; reach overhead and below the knees, including bending, twisting, pulling, and stooping). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Service Experts to get it right for our guests and our business each and every time.</p><p><strong>Desired Candidate Profile</strong></p><p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: Less than 1 year related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p>
Receive email alerts for Factory Jobs jobs
You can cancel your email alert at anytime